Commit 6dba72ec authored by Akinobu Mita's avatar Akinobu Mita Committed by Jonathan Cameron

iio: pressure: bmp280: add support for BMP180

This adds support for the BMP180 to the bmp280 iio driver.

The BMP180 has already been supported by misc/bmp085 driver but it
doesn't use iio framework.  This change adds the kconfig dependency
not to be selected both of them in order to avoid any issues.
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: default avatarVlad Dogaru <vlad.dogaru@intel.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 06ad7ea1
......@@ -6,12 +6,13 @@
menu "Pressure sensors"
config BMP280
tristate "Bosch Sensortec BMP280 pressure sensor driver"
tristate "Bosch Sensortec BMP180 and BMP280 pressure sensor driver"
depends on I2C
depends on !(BMP085_I2C=y || BMP085_I2C=m)
select REGMAP_I2C
help
Say yes here to build support for Bosch Sensortec BMP280
pressure and temperature sensor.
Say yes here to build support for Bosch Sensortec BMP180 and BMP280
pressure and temperature sensors.
To compile this driver as a module, choose M here: the module
will be called bmp280.
......
/*
* Copyright (c) 2014 Intel Corporation
*
* Driver for Bosch Sensortec BMP280 digital pressure sensor.
* Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Datasheet:
* https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf
* https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf
*/
#define pr_fmt(fmt) "bmp280: " fmt
......@@ -15,9 +18,11 @@
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
/* BMP280 specific registers */
#define BMP280_REG_TEMP_XLSB 0xFC
#define BMP280_REG_TEMP_LSB 0xFB
#define BMP280_REG_TEMP_MSB 0xFA
......@@ -26,10 +31,7 @@
#define BMP280_REG_PRESS_MSB 0xF7
#define BMP280_REG_CONFIG 0xF5
#define BMP280_REG_CTRL_MEAS 0xF4
#define BMP280_REG_STATUS 0xF3
#define BMP280_REG_RESET 0xE0
#define BMP280_REG_ID 0xD0
#define BMP280_REG_COMP_TEMP_START 0x88
#define BMP280_COMP_TEMP_REG_COUNT 6
......@@ -65,6 +67,28 @@
#define BMP280_MODE_FORCED BIT(0)
#define BMP280_MODE_NORMAL (BIT(1) | BIT(0))
/* BMP180 specific registers */
#define BMP180_REG_OUT_XLSB 0xF8
#define BMP180_REG_OUT_LSB 0xF7
#define BMP180_REG_OUT_MSB 0xF6
#define BMP180_REG_CALIB_START 0xAA
#define BMP180_REG_CALIB_COUNT 22
#define BMP180_MEAS_SCO BIT(5)
#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO)
#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO)
#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0)
#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1)
#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2)
#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3)
/* BMP180 and BMP280 common registers */
#define BMP280_REG_CTRL_MEAS 0xF4
#define BMP280_REG_RESET 0xE0
#define BMP280_REG_ID 0xD0
#define BMP180_CHIP_ID 0x55
#define BMP280_CHIP_ID 0x58
#define BMP280_SOFT_RESET_VAL 0xB6
......@@ -72,6 +96,7 @@ struct bmp280_data {
struct i2c_client *client;
struct mutex lock;
struct regmap *regmap;
const struct bmp280_chip_info *chip_info;
/*
* Carryover value from temperature conversion, used in pressure
......@@ -80,9 +105,17 @@ struct bmp280_data {
s32 t_fine;
};
struct bmp280_chip_info {
const struct regmap_config *regmap_config;
int (*chip_config)(struct bmp280_data *);
int (*read_temp)(struct bmp280_data *, int *);
int (*read_press)(struct bmp280_data *, int *, int *);
};
/*
* These enums are used for indexing into the array of compensation
* parameters.
* parameters for BMP280.
*/
enum { T1, T2, T3 };
enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
......@@ -290,10 +323,10 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_PRESSURE:
ret = bmp280_read_press(data, val, val2);
ret = data->chip_info->read_press(data, val, val2);
break;
case IIO_TEMP:
ret = bmp280_read_temp(data, val);
ret = data->chip_info->read_temp(data, val);
break;
default:
ret = -EINVAL;
......@@ -315,7 +348,7 @@ static const struct iio_info bmp280_info = {
.read_raw = &bmp280_read_raw,
};
static int bmp280_chip_init(struct bmp280_data *data)
static int bmp280_chip_config(struct bmp280_data *data)
{
int ret;
......@@ -344,6 +377,296 @@ static int bmp280_chip_init(struct bmp280_data *data)
return ret;
}
static const struct bmp280_chip_info bmp280_chip_info = {
.regmap_config = &bmp280_regmap_config,
.chip_config = bmp280_chip_config,
.read_temp = bmp280_read_temp,
.read_press = bmp280_read_press,
};
static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case BMP280_REG_CTRL_MEAS:
case BMP280_REG_RESET:
return true;
default:
return false;
};
}
static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case BMP180_REG_OUT_XLSB:
case BMP180_REG_OUT_LSB:
case BMP180_REG_OUT_MSB:
case BMP280_REG_CTRL_MEAS:
return true;
default:
return false;
}
}
static const struct regmap_config bmp180_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BMP180_REG_OUT_XLSB,
.cache_type = REGCACHE_RBTREE,
.writeable_reg = bmp180_is_writeable_reg,
.volatile_reg = bmp180_is_volatile_reg,
};
static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
{
int ret;
const int conversion_time_max[] = { 4500, 7500, 13500, 25500 };
unsigned int delay_us;
unsigned int ctrl;
ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
if (ret)
return ret;
if (ctrl_meas == BMP180_MEAS_TEMP)
delay_us = 4500;
else
delay_us = conversion_time_max[ilog2(8)];
usleep_range(delay_us, delay_us + 1000);
ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
if (ret)
return ret;
/* The value of this bit reset to "0" after conversion is complete */
if (ctrl & BMP180_MEAS_SCO)
return -EIO;
return 0;
}
static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
{
int ret;
__be16 tmp = 0;
ret = bmp180_measure(data, BMP180_MEAS_TEMP);
if (ret)
return ret;
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2);
if (ret)
return ret;
*val = be16_to_cpu(tmp);
return 0;
}
/*
* These enums are used for indexing into the array of calibration
* coefficients for BMP180.
*/
enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD };
struct bmp180_calib {
s16 AC1;
s16 AC2;
s16 AC3;
u16 AC4;
u16 AC5;
u16 AC6;
s16 B1;
s16 B2;
s16 MB;
s16 MC;
s16 MD;
};
static int bmp180_read_calib(struct bmp280_data *data,
struct bmp180_calib *calib)
{
int ret;
int i;
__be16 buf[BMP180_REG_CALIB_COUNT / 2];
ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf,
sizeof(buf));
if (ret < 0)
return ret;
/* None of the words has the value 0 or 0xFFFF */
for (i = 0; i < ARRAY_SIZE(buf); i++) {
if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff))
return -EIO;
}
calib->AC1 = be16_to_cpu(buf[AC1]);
calib->AC2 = be16_to_cpu(buf[AC2]);
calib->AC3 = be16_to_cpu(buf[AC3]);
calib->AC4 = be16_to_cpu(buf[AC4]);
calib->AC5 = be16_to_cpu(buf[AC5]);
calib->AC6 = be16_to_cpu(buf[AC6]);
calib->B1 = be16_to_cpu(buf[B1]);
calib->B2 = be16_to_cpu(buf[B2]);
calib->MB = be16_to_cpu(buf[MB]);
calib->MC = be16_to_cpu(buf[MC]);
calib->MD = be16_to_cpu(buf[MD]);
return 0;
}
/*
* Returns temperature in DegC, resolution is 0.1 DegC.
* t_fine carries fine temperature as global value.
*
* Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
*/
static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
{
int ret;
s32 x1, x2;
struct bmp180_calib calib;
ret = bmp180_read_calib(data, &calib);
if (ret < 0) {
dev_err(&data->client->dev,
"failed to read calibration coefficients\n");
return ret;
}
x1 = ((adc_temp - calib.AC6) * calib.AC5) >> 15;
x2 = (calib.MC << 11) / (x1 + calib.MD);
data->t_fine = x1 + x2;
return (data->t_fine + 8) >> 4;
}
static int bmp180_read_temp(struct bmp280_data *data, int *val)
{
int ret;
s32 adc_temp, comp_temp;
ret = bmp180_read_adc_temp(data, &adc_temp);
if (ret)
return ret;
comp_temp = bmp180_compensate_temp(data, adc_temp);
/*
* val might be NULL if we're called by the read_press routine,
* who only cares about the carry over t_fine value.
*/
if (val) {
*val = comp_temp * 100;
return IIO_VAL_INT;
}
return 0;
}
static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
{
int ret;
__be32 tmp = 0;
u8 oss = ilog2(8);
ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss));
if (ret)
return ret;
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3);
if (ret)
return ret;
*val = (be32_to_cpu(tmp) >> 8) >> (8 - oss);
return 0;
}
/*
* Returns pressure in Pa, resolution is 1 Pa.
*
* Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
*/
static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
{
int ret;
s32 x1, x2, x3, p;
s32 b3, b6;
u32 b4, b7;
s32 oss = ilog2(8);
struct bmp180_calib calib;
ret = bmp180_read_calib(data, &calib);
if (ret < 0) {
dev_err(&data->client->dev,
"failed to read calibration coefficients\n");
return ret;
}
b6 = data->t_fine - 4000;
x1 = (calib.B2 * (b6 * b6 >> 12)) >> 11;
x2 = calib.AC2 * b6 >> 11;
x3 = x1 + x2;
b3 = ((((s32)calib.AC1 * 4 + x3) << oss) + 2) / 4;
x1 = calib.AC3 * b6 >> 13;
x2 = (calib.B1 * ((b6 * b6) >> 12)) >> 16;
x3 = (x1 + x2 + 2) >> 2;
b4 = calib.AC4 * (u32)(x3 + 32768) >> 15;
b7 = ((u32)adc_press - b3) * (50000 >> oss);
if (b7 < 0x80000000)
p = (b7 * 2) / b4;
else
p = (b7 / b4) * 2;
x1 = (p >> 8) * (p >> 8);
x1 = (x1 * 3038) >> 16;
x2 = (-7357 * p) >> 16;
return p + ((x1 + x2 + 3791) >> 4);
}
static int bmp180_read_press(struct bmp280_data *data,
int *val, int *val2)
{
int ret;
s32 adc_press;
u32 comp_press;
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp180_read_temp(data, NULL);
if (ret)
return ret;
ret = bmp180_read_adc_press(data, &adc_press);
if (ret)
return ret;
comp_press = bmp180_compensate_press(data, adc_press);
*val = comp_press;
*val2 = 1000;
return IIO_VAL_FRACTIONAL;
}
static int bmp180_chip_config(struct bmp280_data *data)
{
return 0;
}
static const struct bmp280_chip_info bmp180_chip_info = {
.regmap_config = &bmp180_regmap_config,
.chip_config = bmp180_chip_config,
.read_temp = bmp180_read_temp,
.read_press = bmp180_read_press,
};
static int bmp280_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
......@@ -367,7 +690,19 @@ static int bmp280_probe(struct i2c_client *client,
indio_dev->info = &bmp280_info;
indio_dev->modes = INDIO_DIRECT_MODE;
data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config);
switch (id->driver_data) {
case BMP180_CHIP_ID:
data->chip_info = &bmp180_chip_info;
break;
case BMP280_CHIP_ID:
data->chip_info = &bmp280_chip_info;
break;
default:
return -EINVAL;
}
data->regmap = devm_regmap_init_i2c(client,
data->chip_info->regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(data->regmap);
......@@ -376,13 +711,13 @@ static int bmp280_probe(struct i2c_client *client,
ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id);
if (ret < 0)
return ret;
if (chip_id != BMP280_CHIP_ID) {
if (chip_id != id->driver_data) {
dev_err(&client->dev, "bad chip id. expected %x got %x\n",
BMP280_CHIP_ID, chip_id);
return -EINVAL;
}
ret = bmp280_chip_init(data);
ret = data->chip_info->chip_config(data);
if (ret < 0)
return ret;
......@@ -390,13 +725,17 @@ static int bmp280_probe(struct i2c_client *client,
}
static const struct acpi_device_id bmp280_acpi_match[] = {
{"BMP0280", 0},
{"BMP0280", BMP280_CHIP_ID },
{"BMP0180", BMP180_CHIP_ID },
{"BMP0085", BMP180_CHIP_ID },
{ },
};
MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
static const struct i2c_device_id bmp280_id[] = {
{"bmp280", 0},
{"bmp280", BMP280_CHIP_ID },
{"bmp180", BMP180_CHIP_ID },
{"bmp085", BMP180_CHIP_ID },
{ },
};
MODULE_DEVICE_TABLE(i2c, bmp280_id);
......@@ -412,5 +751,5 @@ static struct i2c_driver bmp280_driver = {
module_i2c_driver(bmp280_driver);
MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor");
MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment