Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt

@@ -15,7 +15,7 @@ Configuration
 -------------
 
   To set the default configuration, use `make bast_defconfig` which
-  supports the commonly used features of this board
+  supports the commonly used features of this board.
 
 
 Support
@@ -23,15 +23,23 @@ Support
 
   Official support information can be found on the Simtec Electronics
   website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
-  and http://www.simtec.co.uk/products/EB2410ITX/resources.html
+
+  Useful links:
+
+    - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
+
+    - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
+
+    - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
+      and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
 
 
 MTD
 ---
 
-  The NAND and NOR onboard are currently supported in the linux-mtd cvs,
-  and are awaiting merge in the mainline. see the linux-mtd project at
-  http://www.linux-mtd.infradead.org/ for more information.
+  The NAND and NOR support has been merged from the linux-mtd project.
+  Any prolbems, see http://www.linux-mtd.infradead.org/ for more
+  information or up-to-date versions of linux-mtd.
 
 
 IDE
@@ -41,4 +49,10 @@ IDE
   changing speed of devices, PIO Mode 4 capable drives should be used.
 
 
+Maintainers
+-----------
+
+  This board is maintained by Simtec Electronics.
+
+
 (c) 2004 Ben Dooks, Simtec Electronics

Documentation/arm/Samsung-S3C24XX/Overview.txt

@@ -48,9 +48,9 @@ Machines
 NAND
 ----
 
-  The current kernels do not have direct support for the NAND
-  controller, the latest linux-mtd CVS has support for this.
-  See http://www.linux-mtd.infradead.org/
+  The current kernels now have support for the s3c2410 NAND
+  controller. If there are any problems the latest linux-mtd
+  CVS can be found from http://www.linux-mtd.infradead.org/
 
 
 Serial
@@ -84,12 +84,21 @@ Clock Management
 Port Contributors
 -----------------
 
-  Ben Dooks
+  Ben Dooks (BJD)
   Vincent Sanders
   Herbert Potzl
-  Arnaud Patard
+  Arnaud Patard (RTP)
   Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
 
+Document Changes
+----------------
+
+  05 Sep 2004 - BJD - Added Document Changes section
+  05 Sep 2004 - BJD - Added Klaus Fetscher to list of contributors
+  25 Oct 2004 - BJD - Added Dimitry Andric to list of contributors
+  25 Oct 2004 - BJD - Updated the MTD from the 2.6.9 merge
 
 Document Author
 ---------------

Documentation/arm/Samsung-S3C24XX/Suspend.txt

+			S3C24XX Suspend Support
+			=======================
+
+
+Introduction
+------------
+
+  The S3C2410 supports a low-power suspend mode, where the SDRAM is kept
+  in Self-Refresh mode, and all but the esential peripheral blocks are
+  powered down. For more information on how this works, please look
+  at the S3C2410 datasheets from Samsung.
+
+
+Requirements
+------------
+
+  1) A bootloader that can support the necessary resume operation
+
+  2) Support for at least 1 source for resume
+
+  3) CONFIG_PM enabled in the kernel
+
+  4) Any peripherals that are going to be powered down at the same
+     time require suspend/resume support.
+
+
+Resuming
+--------
+
+  The S3C2410 user manual defines the process of sending the CPU to
+  sleep and how it resumes. The default behaviour of the Linux code
+  is to set the GSTATUS3 register to the physical address of the
+  code to resume Linux operation.
+
+  GSTATUS4 is currently left alone by the sleep code, and is free to
+  use for any other purposes.
+
+
+Machine Support
+---------------
+
+  The machine specific functions must call the s3c2410_pm_init() function
+  to say that it's bootloader is capable of resuming. This can be as
+  simple as adding the following to the file:
+
+  late_initcall(s3c2410_pm_init);
+
+  A board can do its own setup before calling s3c2410_pm_init, if it
+  needs to setup anything else for power management support.
+
+  There is currently no support for over-riding the default method of
+  saving the resume address, if your board requires it, then contact
+  the maintainer and discuss what is required.
+
+
+Configuration
+-------------
+
+  The S3C2410 specific configuration in `System Type` defines various
+  aspects of how the S3C2410 suspend and resume support is configured
+
+  `S3C2410 PM Suspend debug`
+
+    This option prints messages to the serial console before and after
+    the actual suspend, giving detailed information on what is
+    happening
+
+
+  `S3C2410 PM Suspend Memory CRC`
+
+    Allows the entire memory to be checksummed before and after the
+    suspend to see if there has been any corruption of the contents.
+
+    This support requires the CRC32 function to be enabled.
+
+
+  `S3C2410 PM Suspend CRC Chunksize (KiB)`
+
+    Defines the size of memory each CRC chunk covers. A smaller value
+    will mean that the CRC data block will take more memory, but will
+    identify any faults with better precision
+
+
+Document Author
+---------------
+
+Ben Dooks, (c) 2004 Simtec Electronics
+

arch/arm/Kconfig.debug

@@ -104,12 +104,15 @@ config DEBUG_S3C2410_PORT
 	  before it is used.
 
 config DEBUG_S3C2410_UART
-	depends on DEBUG_LL && ARCH_S3C2410
-	int "S3C2410 UART to use for low-level debug"
+	depends on ARCH_S3C2410
+	int "S3C2410 UART to use for low-level messages and debug"
 	default "0"
 	help
 	  Choice for UART for kernel low-level using S3C2410 UARTS,
 	  should be between zero and two. The port must have been
 	  initalised by the boot-loader before use.
 
+	  This will affect the port that the uncompressor code uses
+	  to send debug information to.
+
 endmenu

arch/arm/boot/compressed/head.S

@@ -117,6 +117,15 @@
 		.macro	writeb, rb
 		str	\rb, [r3, #0]
 		.endm
+#elif defined(CONFIG_ARCH_S3C2410)
+#include <config/debug/s3c2410/port.h>
+			.macro loadsp, rb
+		mov	\rb, #0x50000000
+		add	\rb, \rb, #0x4000 * CONFIG_DEBUG_S3C2410_UART
+		.endm
+		.macro	writeb, rb
+		strb	\rb, [r3, #0x20]
+		.endm
 #else
 #error no serial architecture defined
 #endif

arch/arm/configs/bast_defconfig

 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10-rc1-bk2
+# Wed Oct 27 11:31:14 2004
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
-CONFIG_STANDALONE=y
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
@@ -33,11 +37,9 @@ CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+# CONFIG_TINY_SHMEM is not set
 
 #
 # Loadable module support
@@ -46,6 +48,7 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
@@ -60,6 +63,7 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -69,14 +73,29 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE_PB is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
 
 #
-# S3C2410 Implementations
+# S3C24XX Implementations
 #
 CONFIG_ARCH_BAST=y
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_ARCH_SMDK2410 is not set
+CONFIG_ARCH_H1940=y
+CONFIG_ARCH_SMDK2410=y
 CONFIG_MACH_VR1000=y
+CONFIG_CPU_S3C2410=y
+
+#
+# S3C2410 Setup
+#
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+
+#
+# h720x Implementations
+#
 
 #
 # Processor Type
@@ -108,9 +127,8 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 # At least one math emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
@@ -118,13 +136,13 @@ CONFIG_BINFMT_AOUT=y
 #
 # Generic Driver Options
 #
+CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
-# CONFIG_PM is not set
+CONFIG_PM=y
 # CONFIG_PREEMPT is not set
+CONFIG_APM=y
 # CONFIG_ARTHUR is not set
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -164,9 +182,20 @@ CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -179,11 +208,13 @@ CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_BAST is not set
 
 #
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
 
@@ -214,6 +245,16 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
 
 #
 # Multi-device support (RAID and LVM)
@@ -246,6 +287,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -338,13 +380,13 @@ CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=m
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDE_BAST=y
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -395,16 +437,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_RAW is not set
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -431,8 +473,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGI is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -459,7 +499,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-# CONFIG_SERIAL_BAST_SIO is not set
+CONFIG_SERIAL_BAST_SIO=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -469,7 +509,6 @@ CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
 # CONFIG_TIPAR is not set
-# CONFIG_QIC02_TAPE is not set
 
 #
 # IPMI
@@ -492,12 +531,9 @@ CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
-
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -512,35 +548,41 @@ CONFIG_I2C_CHARDEV=m
 #
 CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_S3C2410=y
 # CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Hardware Sensors Chip support
 #
 CONFIG_I2C_SENSOR=m
 # CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_IT87 is not set
 CONFIG_SENSORS_LM75=m
+# CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
 # CONFIG_SENSORS_LM80 is not set
 # CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
+# CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -628,9 +670,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_JFFS_FS=y
 CONFIG_JFFS_FS_VERBOSE=0
+# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -651,6 +698,7 @@ CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -661,13 +709,7 @@ CONFIG_SUNRPC=y
 # Partition Types
 #
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_CUMANA=y
-CONFIG_ACORN_PARTITION_EESOX=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_ACORN_PARTITION_POWERTEC=y
-CONFIG_ACORN_PARTITION_RISCIX=y
+# CONFIG_ACORN_PARTITION is not set
 # CONFIG_OSF_PARTITION is not set
 # CONFIG_AMIGA_PARTITION is not set
 # CONFIG_ATARI_PARTITION is not set
@@ -736,13 +778,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 
@@ -763,24 +806,34 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
 #
 # Kernel hacking
 #
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
@@ -790,6 +843,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #

arch/arm/configs/s3c2410_defconfig

 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.10-rc1-bk2
+# Wed Oct 27 11:30:39 2004
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -17,6 +20,7 @@ CONFIG_BROKEN_ON_SMP=y
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -25,6 +29,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
@@ -32,11 +37,9 @@ CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+# CONFIG_TINY_SHMEM is not set
 
 #
 # Loadable module support
@@ -45,6 +48,7 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
@@ -59,6 +63,7 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -68,20 +73,29 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE_PB is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
 
 #
-# S3C2410 Implementations
+# S3C24XX Implementations
 #
 CONFIG_ARCH_BAST=y
 CONFIG_ARCH_H1940=y
 CONFIG_ARCH_SMDK2410=y
 CONFIG_MACH_VR1000=y
+CONFIG_CPU_S3C2410=y
 
 #
 # S3C2410 Setup
 #
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+
+#
+# h720x Implementations
+#
 
 #
 # Processor Type
@@ -113,9 +127,8 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 # At least one math emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
@@ -126,8 +139,9 @@ CONFIG_BINFMT_AOUT=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
-# CONFIG_PM is not set
+CONFIG_PM=y
 # CONFIG_PREEMPT is not set
+CONFIG_APM=y
 # CONFIG_ARTHUR is not set
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 CONFIG_ALIGNMENT_TRAP=y
@@ -194,6 +208,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_BAST is not set
 
 #
 # Self-contained MTD device drivers
@@ -230,6 +245,16 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
 
 #
 # Multi-device support (RAID and LVM)
@@ -262,6 +287,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -354,13 +380,13 @@ CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=m
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDE_BAST is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -411,10 +437,10 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_RAW is not set
 
 #
 # Input Device Drivers
@@ -483,7 +509,6 @@ CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
 # CONFIG_TIPAR is not set
-# CONFIG_QIC02_TAPE is not set
 
 #
 # IPMI
@@ -509,7 +534,6 @@ CONFIG_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -524,16 +548,18 @@ CONFIG_I2C_CHARDEV=m
 #
 CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_S3C2410=y
 # CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Hardware Sensors Chip support
@@ -553,8 +579,10 @@ CONFIG_SENSORS_LM78=m
 # CONFIG_SENSORS_LM80 is not set
 # CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
+# CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -670,6 +698,7 @@ CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -749,13 +778,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 
@@ -776,24 +806,34 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
 #
 # Kernel hacking
 #
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
@@ -803,6 +843,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #

arch/arm/kernel/debug.S

@@ -538,6 +538,9 @@
 #elif defined(CONFIG_ARCH_S3C2410)
 #include <asm/arch/map.h>
 #include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
 
 		.macro addruart, rx
 		mrc	p15, 0, \rx, c1, c0
@@ -559,7 +562,17 @@
 		beq	1001f				@
 		@ FIFO enabled...
 1003:
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+		addne	\rd, \rx, #(S3C2410_VA_GPIO - S3C2410_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
 		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		moveq	\rd, \rd, lsr #SHIFT_2440TXF
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 		bne	1003b
 		b	1002f
@@ -580,8 +593,19 @@
 		beq	1001f				@
 		@ FIFO enabled...
 1003:
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C2410_PA_GPIO - S3C2410_PA_UART)
+		addne	\rd, \rx, #(S3C2410_VA_GPIO - S3C2410_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
 		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		ands	\rd, \rd, #15<<S3C2410_UFSTAT_TXSHIFT
+		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+		teq	\rd, #0
 		bne	1003b
 		b	1002f
 

arch/arm/lib/Makefile

@@ -12,12 +12,12 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   testclearbit.o testsetbit.o uaccess.o getuser.o    \
 		   putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
 		   ucmpdi2.o udivdi3.o lib1funcs.o div64.o	      \
-		   io-readsb.o io-writesb.o io-writesl.o
+		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
 ifeq ($(CONFIG_CPU_32v3),y)
-  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o io-readsl-armv3.o
+  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
 else
-  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o io-readsl-armv4.o
+  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o

arch/arm/lib/io-readsl-armv4.S

-/*
- *  linux/arch/arm/lib/io-readsl-armv4.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Note that some reads can be aligned on half-word boundaries.
- */
-ENTRY(__raw_readsl)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		ands	ip, r1, #3
-		bne	2f
-
-		subs	r2, r2, #4
-		bmi	1001f
-		stmfd	sp!, {r4, lr}
-1000:		ldr	r3, [r0, #0]
-		ldr	r4, [r0, #0]
-		ldr	ip, [r0, #0]
-		ldr	lr, [r0, #0]
-		subs	r2, r2, #4
-		stmia	r1!, {r3, r4, ip, lr}
-		bpl	1000b
-		ldmfd	sp!, {r4, lr}
-1001:		tst	r2, #2
-		ldrne	r3, [r0, #0]
-		ldrne	ip, [r0, #0]
-		stmneia	r1!, {r3, ip}
-		tst	r2, #1
-		ldrne	r3, [r0, #0]
-		strne	r3, [r1, #0]
-		mov	pc, lr
-
-2:		cmp	ip, #2
-		ldr	ip, [r0]
-		blt	4f
-		bgt	6f
-
-#ifndef	__ARMEB__
-
-		/* little endian code */
-
-		strh	ip, [r1], #2
-		mov	ip, ip, lsr #16
-3:		subs	r2, r2, #1
-		ldrne	r3, [r0]
-		orrne	ip, ip, r3, lsl #16
-		strne	ip, [r1], #4
-		movne	ip, r3, lsr #16
-		bne	3b
-		strh	ip, [r1], #2
-		mov	pc, lr
-
-4:		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-		strh	ip, [r1], #2
-		mov	ip, ip, lsr #16
-5:		subs	r2, r2, #1
-		ldrne	r3, [r0]
-		orrne	ip, ip, r3, lsl #8
-		strne	ip, [r1], #4
-		movne	ip, r3, lsr #24
-		bne	5b
-		strb	ip, [r1], #1
-		mov	pc, lr
-
-6:		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-7:		subs	r2, r2, #1
-		ldrne	r3, [r0]
-		orrne	ip, ip, r3, lsl #24
-		strne	ip, [r1], #4
-		movne	ip, r3, lsr #8
-		bne	7b
-		strh	ip, [r1], #2
-		mov	ip, ip, lsr #16
-		strb	ip, [r1]
-		mov	pc, lr
-
-#else
-
-		/* big endian code */
-
-
-		mov	r3, ip, lsr #16
-		strh	r3, [r1], #2
-3:		mov	r3, ip, lsl #16
-		subs	r2, r2, #1
-		ldrne	ip, [r0]
-		orrne	r3, r3, ip, lsr #16
-		strne	r3, [r1], #4
-		bne	3b
- 		strh	ip, [r1], #2
- 		mov	pc, lr
-
-4:		mov	r3, ip, lsr #24
-		strb	r3, [r1], #1
-		mov	r3, ip, lsr #8
-		strh	r3, [r1], #2
-5:		mov	r3, ip, lsl #24
-		subs	r2, r2, #1
-		ldrne	ip, [r0]
-		orrne	r3, r3, ip, lsr #8
-		strne	r3, [r1], #4
-		bne	5b
-		strb	ip, [r1], #1
-		mov	pc, lr
-
-6:		mov	r3, ip, lsr #24
-		strb	r3, [r1], #1
-7:		mov	r3, ip, lsl #8
-		subs	r2, r2, #1
-		ldrne	ip, [r0]
-		orrne	r3, r3, ip, lsr #24
-		strne	r3, [r1], #4
-		bne	7b
-		mov	r3, ip, lsr #8
-		strh	r3, [r1], #2
-		strb	ip, [r1], #1
-		mov	pc, lr
-
-#endif
-
-

arch/arm/lib/io-readsl-armv3.S → arch/arm/lib/io-readsl.S

 /*
- *  linux/arch/arm/lib/io-readsl-armv3.S
+ *  linux/arch/arm/lib/io-readsl.S
  *
  *  Copyright (C) 1995-2000 Russell King
  *
@@ -9,70 +9,71 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
 
-/*
- * Note that some reads can be aligned on half-word boundaries.
- */
 ENTRY(__raw_readsl)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		ands	ip, r1, #3
-		bne	2f
+		bne	3f
 
-1:		ldr	r3, [r0]
-		str	r3, [r1], #4
-		subs	r2, r2, #1
-		bne	1b
+		subs	r2, r2, #4
+		bmi	2f
+		stmfd	sp!, {r4, lr}
+1:		ldr	r3, [r0, #0]
+		ldr	r4, [r0, #0]
+		ldr	ip, [r0, #0]
+		ldr	lr, [r0, #0]
+		subs	r2, r2, #4
+		stmia	r1!, {r3, r4, ip, lr}
+		bpl	1b
+		ldmfd	sp!, {r4, lr}
+2:		tst	r2, #2
+		ldrne	r3, [r0, #0]
+		ldrne	ip, [r0, #0]
+		stmneia	r1!, {r3, ip}
+		tst	r2, #1
+		ldrne	r3, [r0, #0]
+		strne	r3, [r1, #0]
 		mov	pc, lr
 
-2:		cmp	ip, #2
-		ldr	ip, [r0]
-		blt	4f
+3:		ldr	r3, [r0]
+		cmp	ip, #2
+		mov	ip, r3, get_byte_0
+		strb	ip, [r1], #1
 		bgt	6f
-
+		mov	ip, r3, get_byte_1
 		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
+		beq	5f
+		mov	ip, r3, get_byte_2
 		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-3:		subs	r2, r2, #1
+
+4:		subs	r2, r2, #1
+		mov	ip, r3, pull #24
 		ldrne	r3, [r0]
-		orrne	ip, ip, r3, lsl #16
+		orrne	ip, ip, r3, push #8
 		strne	ip, [r1], #4
-		movne	ip, r3, lsr #16
-		bne	3b
-		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-		strb	ip, [r1], #1
-		mov	pc, lr
+		bne	4b
+		b	8f
 
-4:		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
 5:		subs	r2, r2, #1
+		mov	ip, r3, pull #16
 		ldrne	r3, [r0]
-		orrne	ip, ip, r3, lsl #8
+		orrne	ip, ip, r3, push #16
 		strne	ip, [r1], #4
-		movne	ip, r3, lsr #24
 		bne	5b
-		strb	ip, [r1], #1
-		mov	pc, lr
+		b	7f
 
-6:		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-7:		subs	r2, r2, #1
+6:		subs	r2, r2, #1
+		mov	ip, r3, pull #8
 		ldrne	r3, [r0]
-		orrne	ip, ip, r3, lsl #24
+		orrne	ip, ip, r3, push #24
 		strne	ip, [r1], #4
-		movne	ip, r3, lsr #8
-		bne	7b
-		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-		strb	ip, [r1], #1
-		mov	ip, ip, lsr #8
-		strb	ip, [r1], #1
-		mov	pc, lr
+		bne	6b
 
+		mov	r3, ip, get_byte_2
+		strb	r3, [r1, #2]
+7:		mov	r3, ip, get_byte_1
+		strb	r3, [r1, #1]
+8:		mov	r3, ip, get_byte_0
+		strb	r3, [r1, #0]
+		mov	pc, lr

arch/arm/lib/io-writesl.S

@@ -9,53 +9,59 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
 
 ENTRY(__raw_writesl)
 		teq	r2, #0		@ do we have to check for the zero len?
 		moveq	pc, lr
 		ands	ip, r1, #3
-		bne	2f
+		bne	3f
 
+		subs	r2, r2, #4
+		bmi	2f
+		stmfd	sp!, {r4, lr}
+1:		ldmia	r1!, {r3, r4, ip, lr}
+		subs	r2, r2, #4
+		str	r3, [r0, #0]
+		str	r4, [r0, #0]
+		str	ip, [r0, #0]
+		str	lr, [r0, #0]
+		bpl	1b
+		ldmfd	sp!, {r4, lr}
+2:		tst	r2, #2
+		ldmneia	r1!, {r3, ip}
+		strne	r3, [r0, #0]
+		strne	ip, [r0, #0]
 		tst	r2, #1
-		ldrne	r3, [r1], #4
+		ldrne	r3, [r1, #0]
 		strne	r3, [r0, #0]
-1:		subs	r2, r2, #2
-		ldrcs	r3, [r1], #4
-		ldrcs	ip, [r1], #4
-		strcs	r3, [r0, #0]
-		strcs	ip, [r0, #0]
-		bcs	1b
 		mov	pc, lr
 
-2:		bic	r1, r1, #3
-		cmp	ip, #2
+3:		bic	r1, r1, #3
 		ldr	r3, [r1], #4
-		bgt	4f
+		cmp	ip, #2
 		blt	5f
+		bgt	6f
 
-3:		mov	ip, r3, lsr #16
+4:		mov	ip, r3, pull #16
 		ldr	r3, [r1], #4
 		subs	r2, r2, #1
-		orr	ip, ip, r3, lsl #16
-		str	ip, [r0, #0]
-		bne	3b
+		orr	ip, ip, r3, push #16
+		str	ip, [r0]
+		bne	4b
 		mov	pc, lr
 
-4:		mov	ip, r3, lsr #24
+5:		mov	ip, r3, pull #8
 		ldr	r3, [r1], #4
 		subs	r2, r2, #1
-		orr	ip, ip, r3, lsl #8
-		str	ip, [r0, #0]
-		bne	4b
+		orr	ip, ip, r3, push #24
+		str	ip, [r0]
+		bne	5b
 		mov	pc, lr
 
-5:		mov	ip, r3, lsr #8
+6:		mov	ip, r3, pull #24
 		ldr	r3, [r1], #4
 		subs	r2, r2, #1
-		orr	ip, ip, r3, lsl #24
-		str	ip, [r0, #0]
-		bne	5b
+		orr	ip, ip, r3, push #8
+		str	ip, [r0]
+		bne	6b
 		mov	pc, lr
-
-

arch/arm/mach-omap/Kconfig

-if ARCH_OMAP
 
 menu "TI OMAP Implementations"
 
 comment "OMAP Core Type"
 
 config ARCH_OMAP730
+	depends on ARCH_OMAP
 	bool "OMAP730 Based System"
-	select CPU_ARM926T
+	select ARCH_OMAP_OTG
 
 config ARCH_OMAP1510
+	depends on ARCH_OMAP
 	default y
 	bool "OMAP1510 Based System"
-	select CPU_ARM925T
-	select CPU_DCACHE_WRITETHROUGH
 
-config ARCH_OMAP1610
-	bool "OMAP1610 Based System"
-	select CPU_ARM926T
+config ARCH_OMAP16XX
+	depends on ARCH_OMAP
+	bool "OMAP16XX Based System"
+	select ARCH_OMAP_OTG
 
-config ARCH_OMAP5912
-	bool "OMAP5912 Based System"
-	select CPU_ARM926T
+config ARCH_OMAP_OTG
+	bool
 
 comment "OMAP Board Type"
 
 config MACH_OMAP_INNOVATOR
 	bool "TI Innovator"
-	default y
-	depends on ARCH_OMAP1510 || ARCH_OMAP1610
+	depends on ARCH_OMAP1510 || ARCH_OMAP16XX
 	help
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
 
 config MACH_OMAP_H2
 	bool "TI H2 Support"
-	depends on ARCH_OMAP1610
-        select MACH_OMAP_INNOVATOR
+	depends on ARCH_OMAP16XX
     	help
-	  TI OMAP 1610 H2 board support. Say Y here if you have such
+	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_H3
 	bool "TI H3 Support"
-	depends on ARCH_OMAP1610
+	depends on ARCH_OMAP16XX
     	help
-	  TI OMAP 1610 H3 board support. Say Y here if you have such
+	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_H4
 	bool "TI H4 Support"
-	depends on ARCH_OMAP1610
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 1610 H4 board support. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
-	depends on ARCH_OMAP5912
+	depends on ARCH_OMAP16XX
     	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.
@@ -64,19 +61,16 @@ config MACH_OMAP_OSK
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
 	depends on ARCH_OMAP730
-	select LEDS
-	select LEDS_TIMER
-	select LEDS_CPU
     	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP1510 || ARCH_OMAP1610
+	depends on ARCH_OMAP1510 || ARCH_OMAP16XX
 	help
-          Support for generic OMAP-1510 or 1610 board with no
-          FPGA. Can be used as template for porting Linux to
+          Support for generic OMAP-1510, 1610 or 1710 board with
+          no FPGA. Can be used as template for porting Linux to
           custom OMAP boards. Say Y here if you have a custom
           board.
 
@@ -84,6 +78,7 @@ comment "OMAP Feature Selections"
 
 #config OMAP_BOOT_TAG
 #	bool "OMAP bootloader information passing"
+#        depends on ARCH_OMAP
 #        default n
 #        help
 #          Say Y, if you have a bootloader which passes information
@@ -91,6 +86,7 @@ comment "OMAP Feature Selections"
 
 config OMAP_MUX
 	bool "OMAP multiplexing support"
+        depends on ARCH_OMAP
 	default y
         help
           Pin multiplexing support for OMAP boards. If your bootloader
@@ -106,8 +102,18 @@ config OMAP_MUX_DEBUG
           This is useful if you want to find out the correct values of the
           multiplexing registers.
 
+config OMAP_MUX_WARNINGS
+	bool "Warn about pins the bootloader didn't set up"
+        depends on OMAP_MUX
+        default y
+        help
+	  Choose Y here to warn whenever driver initialization logic needs
+	  to change the pin multiplexing setup.  When there are no warnings
+	  printed, it's safe to deselect OMAP_MUX for your product.
+
 choice
 	prompt "Low-level debug console UART"
+	depends on ARCH_OMAP
 	default OMAP_LL_DEBUG_UART1
 
 config OMAP_LL_DEBUG_UART1
@@ -129,7 +135,7 @@ config OMAP_ARM_195MHZ
 
 config OMAP_ARM_192MHZ
 	bool "OMAP ARM 192 MHz CPU"
-	depends on ARCH_OMAP1610 || ARCH_OMAP5912
+	depends on ARCH_OMAP16XX
 	help
           Enable 192MHz clock for OMAP CPU. If unsure, say N.
 
@@ -141,29 +147,27 @@ config OMAP_ARM_182MHZ
 
 config OMAP_ARM_168MHZ
 	bool "OMAP ARM 168 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP1610 || ARCH_OMAP730 || ARCH_OMAP5912
+	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
 	help
           Enable 168MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_120MHZ
 	bool "OMAP ARM 120 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP1610 || ARCH_OMAP730
+	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP1610 || ARCH_OMAP730
+	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
         default y
 	help
           Enable 60MHz clock for OMAP CPU. If unsure, say Y.
 
 config OMAP_ARM_30MHZ
 	bool "OMAP ARM 30 MHz CPU"
-	depends on ARCH_OMAP1510 || ARCH_OMAP1610 || ARCH_OMAP730
+	depends on ARCH_OMAP1510 || ARCH_OMAP16XX || ARCH_OMAP730
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
 endmenu
-
-endif

arch/arm/mach-omap/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o time.o irq.o dma.o clocks.o mux.o gpio.o mcbsp.o
+obj-y := common.o time.o irq.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o
 obj-m :=
 obj-n :=
 obj-  :=
@@ -18,9 +18,7 @@ obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o
 
 # OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP1710) += ocpi.o
-obj-$(CONFIG_ARCH_OMAP1610) += ocpi.o
-obj-$(CONFIG_ARCH_OMAP5912) += ocpi.o
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 # LEDs support
 led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o

arch/arm/mach-omap/board-generic.c

@@ -22,42 +22,21 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/clocks.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
+#include <asm/arch/serial.h>
 
 #include "common.h"
 
+static int __initdata generic_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
 static void __init omap_generic_init_irq(void)
 {
 	omap_init_irq();
 }
 
-/*
- * Muxes the serial ports on
- */
-#ifdef CONFIG_ARCH_OMAP1510
-static void __init omap_early_serial_init(void)
-{
-#ifdef CONFIG_OMAP_LL_DEBUG_UART1
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-#endif
-
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-#endif
-
-#ifdef CONFIG_OMAP_LL_DEBUG_UART1
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-#endif
-}
-#endif
-
 /* assume no Mini-AB port */
 
 #ifdef CONFIG_ARCH_OMAP1510
@@ -69,7 +48,7 @@ static struct omap_usb_config generic1510_usb_config __initdata = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1610
+#if defined(CONFIG_ARCH_OMAP16XX)
 static struct omap_usb_config generic1610_usb_config __initdata = {
 	.register_host	= 1,
 	.register_dev	= 1,
@@ -91,17 +70,17 @@ static void __init omap_generic_init(void)
 	 */
 #ifdef CONFIG_ARCH_OMAP1510
 	if (cpu_is_omap1510()) {
-		omap_early_serial_init();
 		generic_config[0].data = &generic1510_usb_config;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1610
+#if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
 		generic_config[0].data = &generic1610_usb_config;
 	}
 #endif
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
+	omap_serial_init(generic_serial_ports);
 }
 
 static void __init omap_generic_map_io(void)

arch/arm/mach-omap/board-h2.c

@@ -32,14 +32,11 @@
 #include <asm/arch/clocks.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/usb.h>
+#include <asm/arch/serial.h>
 
 #include "common.h"
 
-static struct map_desc h2_io_desc[] __initdata = {
-{ OMAP1610_ETHR_BASE, OMAP1610_ETHR_START, OMAP1610_ETHR_SIZE,MT_DEVICE },
-{ OMAP1610_NOR_FLASH_BASE, OMAP1610_NOR_FLASH_START, OMAP1610_NOR_FLASH_SIZE,
-	MT_DEVICE },
-};
+static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
 
 static struct resource h2_smc91x_resources[] = {
 	[0] = {
@@ -78,15 +75,22 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.hmc_mode	= 19,	// 0:host(off) 1:dev|otg 2:disabled
 	// .hmc_mode	= 21,	// 0:host(off) 1:dev(loopback) 2:host(loopback)
 #elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
 	.hmc_mode	= 20,	// 1:dev|otg(off) 1:host 2:disabled
 #endif
 
 	.pins[1]	= 3,
 };
 
+static struct omap_mmc_config h2_mmc_config __initdata = {
+	.mmc_blocks		= 1,
+	.mmc1_power_pin		= -1,	/* tps65010 gpio3 */
+	.mmc1_switch_pin	= OMAP_MPUIO(1),
+};
+
 static struct omap_board_config_kernel h2_config[] = {
 	{ OMAP_TAG_USB,           &h2_usb_config },
+	{ OMAP_TAG_MMC,           &h2_mmc_config },
 };
 
 static void __init h2_init(void)
@@ -99,7 +103,7 @@ static void __init h2_init(void)
 static void __init h2_map_io(void)
 {
 	omap_map_io();
-	iotable_init(h2_io_desc, ARRAY_SIZE(h2_io_desc));
+	omap_serial_init(h2_serial_ports);
 }
 
 MACHINE_START(OMAP_H2, "TI-H2")

arch/arm/mach-omap/board-h3.c

@@ -30,6 +30,8 @@
 #include <asm/arch/irqs.h>
 #include <asm/arch/gpio.h>
 #include <asm/mach-types.h>
+#include <asm/arch/serial.h>
+
 #include "common.h"
 
 void h3_init_irq(void)
@@ -37,6 +39,8 @@ void h3_init_irq(void)
 	omap_init_irq();
 }
 
+static int __initdata h3_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP1710_ETHR_START,		/* Physical */
@@ -66,15 +70,10 @@ static void __init h3_init(void)
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-static struct map_desc h3_io_desc[] __initdata = {
-{ OMAP1710_ETHR_BASE,  OMAP1710_ETHR_START,  OMAP1710_ETHR_SIZE,  MT_DEVICE },
-{ OMAP_NOR_FLASH_BASE, OMAP_NOR_FLASH_START, OMAP_NOR_FLASH_SIZE, MT_DEVICE },
-};
-
 static void __init h3_map_io(void)
 {
 	omap_map_io();
-	iotable_init(h3_io_desc, ARRAY_SIZE(h3_io_desc));
+	omap_serial_init(h3_serial_ports);
 }
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")

arch/arm/mach-omap/board-innovator.c

@@ -30,6 +30,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/usb.h>
+#include <asm/arch/serial.h>
 
 #include "common.h"
 
@@ -43,6 +44,8 @@ static struct map_desc innovator1510_io_desc[] __initdata = {
 	MT_DEVICE },
 };
 
+static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
 static struct resource innovator1510_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
@@ -69,18 +72,12 @@ static struct platform_device *innovator1510_devices[] __initdata = {
 
 #endif /* CONFIG_ARCH_OMAP1510 */
 
-#ifdef CONFIG_ARCH_OMAP1610
-
-static struct map_desc innovator1610_io_desc[] __initdata = {
-{ OMAP1610_ETHR_BASE, OMAP1610_ETHR_START, OMAP1610_ETHR_SIZE,MT_DEVICE },
-{ OMAP1610_NOR_FLASH_BASE, OMAP1610_NOR_FLASH_START, OMAP1610_NOR_FLASH_SIZE,
-	MT_DEVICE },
-};
+#ifdef CONFIG_ARCH_OMAP16XX
 
 static struct resource innovator1610_smc91x_resources[] = {
 	[0] = {
-		.start	= OMAP1610_ETHR_START,		/* Physical */
-		.end	= OMAP1610_ETHR_START + SZ_4K,
+		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
+		.end	= INNOVATOR1610_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -101,7 +98,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
 	&innovator1610_smc91x_device,
 };
 
-#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* CONFIG_ARCH_OMAP16XX */
 
 void innovator_init_irq(void)
 {
@@ -116,16 +113,19 @@ void innovator_init_irq(void)
 
 #ifdef CONFIG_ARCH_OMAP1510
 static struct omap_usb_config innovator1510_usb_config __initdata = {
-	/* has usb host and device, but no Mini-AB port */
+	/* for bundled non-standard host and peripheral cables */
+	.hmc_mode	= 4,
+
 	.register_host	= 1,
+	.pins[1]	= 6,
+	.pins[2]	= 6,		/* Conflicts with UART2 */
+
 	.register_dev	= 1,
-	/* Assume bad Innovator wiring; Use internal host only with custom cable */
-	.hmc_mode	= 16,
 	.pins[0]	= 2,
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP1610
+#ifdef CONFIG_ARCH_OMAP16XX
 static struct omap_usb_config h2_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg		= 2,
@@ -153,7 +153,7 @@ static void __init innovator_init(void)
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1610
+#ifdef CONFIG_ARCH_OMAP16XX
 	if (!cpu_is_omap1510()) {
 		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
 	}
@@ -163,7 +163,7 @@ static void __init innovator_init(void)
 	if (cpu_is_omap1510())
 		innovator_config[0].data = &innovator1510_usb_config;
 #endif
-#ifdef CONFIG_ARCH_OMAP1610
+#ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610())
 		innovator_config[0].data = &h2_usb_config;
 #endif
@@ -187,11 +187,7 @@ static void __init innovator_map_io(void)
 		       fpga_read(OMAP1510_FPGA_BOARD_REV));
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP1610
-	if (!cpu_is_omap1510()) {
-		iotable_init(innovator1610_io_desc, ARRAY_SIZE(innovator1610_io_desc));
-	}
-#endif
+	omap_serial_init(innovator_serial_ports);
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")

arch/arm/mach-omap/board-osk.c

@@ -38,15 +38,18 @@
 #include <asm/arch/clocks.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/fpga.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/serial.h>
 
 #include "common.h"
 
 static struct map_desc osk5912_io_desc[] __initdata = {
-{ OMAP_OSK_ETHR_BASE, OMAP_OSK_ETHR_START, OMAP_OSK_ETHR_SIZE,MT_DEVICE },
 { OMAP_OSK_NOR_FLASH_BASE, OMAP_OSK_NOR_FLASH_START, OMAP_OSK_NOR_FLASH_SIZE,
 	MT_DEVICE },
 };
 
+static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0};
+
 static struct resource osk5912_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP_OSK_ETHR_START,		/* Physical */
@@ -76,16 +79,29 @@ void osk_init_irq(void)
 	omap_init_irq();
 }
 
+static struct omap_usb_config osk_usb_config __initdata = {
+	/* has usb host and device, but no Mini-AB port */
+	.register_host	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 2,
+};
+
+static struct omap_board_config_kernel osk_config[] = {
+	{ OMAP_TAG_USB,           &osk_usb_config },
+};
+
 static void __init osk_init(void)
 {
         platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
+	omap_board_config = osk_config;
+	omap_board_config_size = ARRAY_SIZE(osk_config);
 }
 
 static void __init osk_map_io(void)
 {
 	omap_map_io();
 	iotable_init(osk5912_io_desc, ARRAY_SIZE(osk5912_io_desc));
-
+	omap_serial_init(osk_serial_ports);
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")

arch/arm/mach-omap/board-perseus2.c

@@ -24,6 +24,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
+#include <asm/arch/serial.h>
 
 #include "common.h"
 
@@ -45,6 +46,8 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
@@ -104,6 +107,7 @@ static void __init omap_perseus2_map_io(void)
 	 * It is used as the Ethernet controller interrupt
 	 */
 	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_serial_init(p2_serial_ports);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")

arch/arm/mach-omap/clock.h

+/*
+ *  linux/arch/arm/mach-omap/clock.h
+ *
+ *  Copyright (C) 2004 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+
+struct clk {
+	struct list_head	node;
+	struct module		*owner;
+	const char		*name;
+	struct clk		*parent;
+	unsigned long		rate;
+	__s8			usecount;
+	__u8			flags;
+	__u32			enable_reg;
+	__u8			enable_bit;
+	__u8			rate_offset;
+	void			(*recalc)(struct clk *);
+	int			(*set_rate)(unsigned long);
+	long			(*round_rate)(unsigned long);
+};
+
+
+struct mpu_rate {
+	unsigned long		rate;
+	unsigned long		xtal;
+	unsigned long		pll_rate;
+	__u16			ckctl_val;
+	__u16			dpllctl_val;
+};
+
+
+/* Clock flags */
+#define RATE_CKCTL		1
+#define RATE_FIXED		2
+#define RATE_PROPAGATES		4
+#define VIRTUAL_CLOCK		8
+#define ALWAYS_ENABLED		16
+#define ENABLE_REG_32BIT	32
+#define DOES_NOT_EXIST_ON_1510	64
+#define DOES_NOT_EXIST_ON_1610	128 /* Including 1710 */
+
+/* ARM_CKCTL bit shifts */
+#define CKCTL_PERDIV_OFFSET	0
+#define CKCTL_LCDDIV_OFFSET	2
+#define CKCTL_ARMDIV_OFFSET	4
+#define CKCTL_DSPDIV_OFFSET	6
+#define CKCTL_TCDIV_OFFSET	8
+#define CKCTL_DSPMMUDIV_OFFSET	10
+/*#define ARM_TIMXO		12*/
+#define EN_DSPCK		13
+/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
+
+/* ARM_IDLECT1 bit shifts */
+/*#define IDLWDT_ARM	0*/
+/*#define IDLXORP_ARM	1*/
+/*#define IDLPER_ARM	2*/
+/*#define IDLLCD_ARM	3*/
+/*#define IDLLB_ARM	4*/
+/*#define IDLHSAB_ARM	5*/
+/*#define IDLIF_ARM	6*/
+/*#define IDLDPLL_ARM	7*/
+/*#define IDLAPI_ARM	8*/
+/*#define IDLTIM_ARM	9*/
+/*#define SETARM_IDLE	11*/
+
+/* ARM_IDLECT2 bit shifts */
+#define EN_WDTCK	0
+#define EN_XORPCK	1
+#define EN_PERCK	2
+#define EN_LCDCK	3
+#define EN_LBCK		4 /* Not on 1610/1710 */
+/*#define EN_HSABCK	5*/
+#define EN_APICK	6
+#define EN_TIMCK	7
+#define DMACK_REQ	8
+#define EN_GPIOCK	9 /* Not on 1610/1710 */
+/*#define EN_LBFREECK	10*/
+#define EN_CKOUT_ARM	11
+
+/* ARM_IDLECT3 bit shifts */
+#define EN_OCPI_CK	0
+#define EN_TC1_CK	2
+#define EN_TC2_CK	4
+
+/* Various register defines for clock controls scattered around OMAP chip */
+#define USB_MCLK_EN		4	/* In ULPD_CLKC_CTRL */
+#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
+
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+int clk_init(void);
+
+#endif

arch/arm/mach-omap/common.h

@@ -31,5 +31,6 @@ struct sys_timer;
 
 extern void omap_map_io(void);
 extern struct sys_timer omap_timer;
+extern void omap_serial_init(int ports[]);
 
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */

arch/arm/mach-omap/gpio.c

@@ -94,7 +94,7 @@ struct gpio_bank {
 #define METHOD_GPIO_1610	2
 #define METHOD_GPIO_730		3
 
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710) || defined(CONFIG_ARCH_OMAP5912)
+#if defined(CONFIG_ARCH_OMAP16XX)
 static struct gpio_bank gpio_bank_1610[5] = {
 	{ OMAP_MPUIO_BASE,     INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
 	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
@@ -135,8 +135,8 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 		return &gpio_bank[1];
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710) || defined(CONFIG_ARCH_OMAP5912)
-	if (cpu_is_omap1610() || cpu_is_omap1710() || cpu_is_omap5912()) {
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (cpu_is_omap16xx()) {
 		if (OMAP_GPIO_IS_MPUIO(gpio))
 			return &gpio_bank[0];
 		return &gpio_bank[1 + (gpio >> 4)];
@@ -172,8 +172,8 @@ static inline int gpio_valid(int gpio)
 	if (cpu_is_omap1510() && gpio < 16)
 		return 0;
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710) || defined(CONFIG_ARCH_OMAP5912)
-	if ((cpu_is_omap1610() || cpu_is_omap1710() || cpu_is_omap5912()) && gpio < 64)
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if ((cpu_is_omap16xx()) && gpio < 64)
 		return 0;
 #endif
 #ifdef CONFIG_ARCH_OMAP730
@@ -554,7 +554,7 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 	if (bank->method == METHOD_GPIO_1510)
 		isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710) || defined(CONFIG_ARCH_OMAP5912)
+#if defined(CONFIG_ARCH_OMAP16XX)
 	if (bank->method == METHOD_GPIO_1610)
 		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
 #endif
@@ -588,7 +588,7 @@ static void gpio_ack_irq(unsigned int irq)
 	if (bank->method == METHOD_GPIO_1510)
 		__raw_writew(1 << (gpio & 0x0f), bank->base + OMAP1510_GPIO_INT_STATUS);
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710) || defined(CONFIG_ARCH_OMAP5912)
+#if defined(CONFIG_ARCH_OMAP16XX)
 	if (bank->method == METHOD_GPIO_1610)
 		__raw_writew(1 << (gpio & 0x0f), bank->base + OMAP1610_GPIO_IRQSTATUS1);
 #endif
@@ -668,8 +668,8 @@ static int __init _omap_gpio_init(void)
 		gpio_bank = gpio_bank_1510;
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710) || defined(CONFIG_ARCH_OMAP5912)
-	if (cpu_is_omap1610() || cpu_is_omap1710() || cpu_is_omap5912()) {
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (cpu_is_omap16xx()) {
 		int rev;
 
 		gpio_bank_count = 5;
@@ -702,7 +702,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
 		}
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710) || defined(CONFIG_ARCH_OMAP5912)
+#if defined(CONFIG_ARCH_OMAP16XX)
 		if (bank->method == METHOD_GPIO_1610) {
 			__raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
@@ -722,7 +722,7 @@ static int __init _omap_gpio_init(void)
 				set_irq_chip(j, &mpuio_irq_chip);
 			else
 				set_irq_chip(j, &gpio_irq_chip);
-			set_irq_handler(j, do_level_IRQ);
+			set_irq_handler(j, do_edge_IRQ);
 			set_irq_flags(j, IRQF_VALID);
 		}
 		set_irq_chained_handler(bank->irq, gpio_irq_handler);

arch/arm/mach-omap/irq.c

@@ -140,12 +140,11 @@ static struct omap_irq_bank omap1510_irq_banks[] = {
 };
 #endif
 
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912) \
-				  || defined(CONFIG_ARCH_OMAP1710)
+#if defined(CONFIG_ARCH_OMAP16XX)
 
 static struct omap_irq_bank omap1610_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3fefe8f },
-	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xfffff7ff },
+	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xfdb7c1fd },
 	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0xfffff7ff },
 	{ .base_reg = OMAP_IH2_BASE + 0x200,	.trigger_map = 0xffffffff },
 };
@@ -173,9 +172,8 @@ void __init omap_init_irq(void)
 		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP5912) \
-				  || defined(CONFIG_ARCH_OMAP1710)
-	if (cpu_is_omap1610() || cpu_is_omap5912() || cpu_is_omap1710()) {
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (cpu_is_omap16xx()) {
 		irq_banks = omap1610_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
 	}

arch/arm/mach-omap/mcbsp.c

@@ -18,6 +18,7 @@
 #include <linux/wait.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
+#include <linux/err.h>
 
 #include <asm/delay.h>
 #include <asm/io.h>
@@ -28,6 +29,8 @@
 #include <asm/arch/irqs.h>
 #include <asm/arch/mcbsp.h>
 
+#include <asm/hardware/clock.h>
+
 #ifdef CONFIG_MCBSP_DEBUG
 #define DBG(x...)	printk(x)
 #else
@@ -61,6 +64,8 @@ struct omap_mcbsp {
 };
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
+static struct clk *mcbsp_dsp_ck = 0;
+static struct clk *mcbsp_api_ck = 0;
 
 
 static void omap_mcbsp_dump_reg(u8 id)
@@ -153,8 +158,8 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config
 	OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1);
 	OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2);
 	OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1);
-	OMAP_MCBSP_WRITE(io_base, SRGR2, config->mcr2);
-	OMAP_MCBSP_WRITE(io_base, SRGR1, config->mcr1);
+	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
+	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
 }
 
@@ -181,6 +186,7 @@ static int omap_mcbsp_check(unsigned int id)
 	return -1;
 }
 
+#define EN_XORPCK		1
 #define DSP_RSTCT2              0xe1008014
 
 static void omap_mcbsp_dsp_request(void)
@@ -188,10 +194,8 @@ static void omap_mcbsp_dsp_request(void)
 	if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
 		omap_writew((omap_readw(ARM_RSTCT1) | (1 << 1) | (1 << 2)),
 			    ARM_RSTCT1);
-		omap_writew((omap_readw(ARM_CKCTL) | 1 << EN_DSPCK),
-			    ARM_CKCTL);
-		omap_writew((omap_readw(ARM_IDLECT2) | (1 << EN_APICK)),
-			    ARM_IDLECT2);
+		clk_enable(mcbsp_dsp_ck);
+		clk_enable(mcbsp_api_ck);
 
 		/* enable 12MHz clock to mcbsp 1 & 3 */
 		__raw_writew(__raw_readw(DSP_IDLECT2) | (1 << EN_XORPCK),
@@ -588,7 +592,7 @@ static const struct omap_mcbsp_info mcbsp_1510[] = {
 };
 #endif
 
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710)
+#if defined(CONFIG_ARCH_OMAP16XX)
 static const struct omap_mcbsp_info mcbsp_1610[] = {
 	[0] = { .virt_base = OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
@@ -614,6 +618,18 @@ static int __init omap_mcbsp_init(void)
 	static const struct omap_mcbsp_info *mcbsp_info;
 
 	printk("Initializing OMAP McBSP system\n");
+
+	mcbsp_dsp_ck = clk_get(0, "dsp_ck");
+	if (IS_ERR(mcbsp_dsp_ck)) {
+		printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
+		return PTR_ERR(mcbsp_dsp_ck);
+	}
+	mcbsp_api_ck = clk_get(0, "api_ck");
+	if (IS_ERR(mcbsp_dsp_ck)) {
+		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
+		return PTR_ERR(mcbsp_api_ck);
+	}
+
 #ifdef CONFIG_ARCH_OMAP730
 	if (cpu_is_omap730()) {
 		mcbsp_info = mcbsp_730;
@@ -626,7 +642,7 @@ static int __init omap_mcbsp_init(void)
 		mcbsp_count = ARRAY_SIZE(mcbsp_1510);
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710)
+#if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap1610() || cpu_is_omap1710()) {
 		mcbsp_info = mcbsp_1610;
 		mcbsp_count = ARRAY_SIZE(mcbsp_1610);

arch/arm/mach-omap/mux.c

@@ -32,18 +32,26 @@
 #define __MUX_C__
 #include <asm/arch/mux.h>
 
+#ifdef CONFIG_OMAP_MUX
+
 /*
  * Sets the Omap MUX and PULL_DWN registers based on the table
  */
-int omap_cfg_reg(const reg_cfg_t reg_cfg)
+int __init_or_module
+omap_cfg_reg(const reg_cfg_t reg_cfg)
 {
-#ifdef CONFIG_OMAP_MUX
 	static spinlock_t mux_spin_lock = SPIN_LOCK_UNLOCKED;
 
 	unsigned long flags;
 	reg_cfg_set *cfg;
 	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
 		pull_orig = 0, pull = 0;
+	unsigned int mask, warn = 0;
+
+	if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) {
+		printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg);
+		return -EINVAL;
+	}
 
 	cfg = &reg_cfg_table[reg_cfg];
 
@@ -56,12 +64,20 @@ int omap_cfg_reg(const reg_cfg_t reg_cfg)
 
 	/* Check the mux register in question */
 	if (cfg->mux_reg) {
+		unsigned	tmp1, tmp2;
+
 		reg_orig = omap_readl(cfg->mux_reg);
 
 		/* The mux registers always seem to be 3 bits long */
-		reg = reg_orig & ~(0x7 << cfg->mask_offset);
+		mask = (0x7 << cfg->mask_offset);
+		tmp1 = reg_orig & mask;
+		reg = reg_orig & ~mask;
+
+		tmp2 = (cfg->mask << cfg->mask_offset);
+		reg |= tmp2;
 
-		reg |= (cfg->mask << cfg->mask_offset);
+		if (tmp1 != tmp2)
+			warn = 1;
 
 		omap_writel(reg, cfg->mux_reg);
 	}
@@ -70,12 +86,18 @@ int omap_cfg_reg(const reg_cfg_t reg_cfg)
 	if (!cpu_is_omap1510()) {
 		if (cfg->pu_pd_reg && cfg->pull_val) {
 			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+			mask = 1 << cfg->pull_bit;
+
 			if (cfg->pu_pd_val) {
+				if (!(pu_pd_orig & mask))
+					warn = 1;
 				/* Use pull up */
-				pu_pd = pu_pd_orig | (1 << cfg->pull_bit);
+				pu_pd = pu_pd_orig | mask;
 			} else {
+				if (pu_pd_orig & mask)
+					warn = 1;
 				/* Use pull down */
-				pu_pd = pu_pd_orig & ~(1 << cfg->pull_bit);
+				pu_pd = pu_pd_orig & ~mask;
 			}
 			omap_writel(pu_pd, cfg->pu_pd_reg);
 		}
@@ -84,21 +106,32 @@ int omap_cfg_reg(const reg_cfg_t reg_cfg)
 	/* Check for an associated pull down register */
 	if (cfg->pull_reg) {
 		pull_orig = omap_readl(cfg->pull_reg);
+		mask = 1 << cfg->pull_bit;
 
 		if (cfg->pull_val) {
+			if (pull_orig & mask)
+				warn = 1;
 			/* Low bit = pull enabled */
-			pull = pull_orig & ~(1 << cfg->pull_bit);
+			pull = pull_orig & ~mask;
 		} else {
+			if (!(pull_orig & mask))
+				warn = 1;
 			/* High bit = pull disabled */
-			pull = pull_orig | (1 << cfg->pull_bit);
+			pull = pull_orig | mask;
 		}
 
 		omap_writel(pull, cfg->pull_reg);
 	}
 
+	if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+	}
+
 #ifdef CONFIG_OMAP_MUX_DEBUG
-	if (cfg->debug) {
-		printk("Omap: Setting register %s\n", cfg->name);
+	if (cfg->debug || warn) {
+		printk("MUX: Setting register %s\n", cfg->name);
 		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
 
@@ -118,8 +151,13 @@ int omap_cfg_reg(const reg_cfg_t reg_cfg)
 
 	spin_unlock_irqrestore(&mux_spin_lock, flags);
 
-#endif
+#ifdef CONFIG_OMAP_MUX_ERRORS
+	return warn ? -ETXTBSY : 0;
+#else
 	return 0;
+#endif
 }
 
 EXPORT_SYMBOL(omap_cfg_reg);
+
+#endif	/* CONFIG_OMAP_MUX */

arch/arm/mach-omap/ocpi.c

@@ -59,20 +59,12 @@ int ocpi_enable(void)
 
 	/* Make sure there's clock for OCPI */
 
-#if defined(CONFIG_ARCH_OMAP1610) || defined(CONFIG_ARCH_OMAP1710)
+#if defined(CONFIG_ARCH_OMAP16XX)
         if (cpu_is_omap1610() || cpu_is_omap1710()) {
-		val = omap_readl(OMAP1610_ARM_IDLECT3);
+		val = omap_readl(OMAP16XX_ARM_IDLECT3);
 		val |= EN_OCPI_CK;
 		val &= ~IDLOCPI_ARM;
-		omap_writel(val, OMAP1610_ARM_IDLECT3);
-        }
-#endif
-#ifdef CONFIG_ARCH_OMAP5912
-        if (cpu_is_omap5912()) {
-		val = omap_readl(OMAP5912_ARM_IDLECT3);
-		val |= EN_OCPI_CK;
-		val &= ~IDLOCPI_ARM;
-		omap_writel(val, OMAP5912_ARM_IDLECT3);
+		omap_writel(val, OMAP16XX_ARM_IDLECT3);
         }
 #endif
 	/* Enable access for OHCI in OCPI */

arch/arm/mach-omap/time.c

@@ -41,7 +41,6 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/clocks.h>
 
 #ifndef __instrument
 #define __instrument

arch/arm/mach-s3c2410/Kconfig

@@ -72,4 +72,31 @@ config S3C2410_DMA_DEBUG
 	  the CPU time doing so.
 
 
+config S3C2410_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on ARCH_S3C2410 && PM
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+	  for more information.
+
+config S3C2410_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on ARCH_S3C2410 && PM && CRC32
+	help
+ 	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+config S3C2410_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
 endif

arch/arm/mach-s3c2410/Makefile

@@ -15,6 +15,10 @@ obj-			:=
 obj-$(CONFIG_CPU_S3C2410)  += s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)  += dma.o
 
+# Power Management support
+
+obj-$(CONFIG_PM)	   += pm.o sleep.o
+
 # S3C2440 support
 
 obj-$(CONFIG_CPU_S3C2440)  += s3c2440.o s3c2440-dsc.o

arch/arm/mach-s3c2410/clock.h

@@ -17,11 +17,30 @@ struct clk {
 	atomic_t              used;
 	unsigned long         rate;
 	unsigned long         ctrlbit;
+	int		    (*enable)(struct clk *, int enable);
 };
 
+/* other clocks which may be registered by board support */
+
+extern struct clk s3c24xx_dclk0;
+extern struct clk s3c24xx_dclk1;
+extern struct clk s3c24xx_clkout0;
+extern struct clk s3c24xx_clkout1;
+extern struct clk s3c24xx_uclk;
+
 /* processor clock settings, in Hz */
 
 extern unsigned long s3c24xx_xtal;
 extern unsigned long s3c24xx_pclk;
 extern unsigned long s3c24xx_hclk;
 extern unsigned long s3c24xx_fclk;
+
+/* exports for arch/arm/mach-s3c2410
+ *
+ * Please DO NOT use these outside of arch/arm/mach-s3c2410
+*/
+
+extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
+extern int s3c2410_register_clock(struct clk *clk);
+extern int s3c2410_init_clocks(void);
+

arch/arm/mach-s3c2410/cpu.h

@@ -11,6 +11,7 @@
  *
  * Modifications:
  *     24-Aug-2004 BJD  Start of generic S3C24XX support
+ *     18-Oct-2004 BJD  Moved board struct into this file
 */
 
 #define IODESC_ENT(x) { S3C2410_VA_##x, S3C2410_PA_##x, S3C2410_SZ_##x, MT_DEVICE }
@@ -38,3 +39,21 @@ extern void s3c2440_map_io(struct map_desc *mach_desc, int size);
 #endif
 
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+/* the board structure is used at first initialsation time
+ * to get info such as the devices to register for this
+ * board. This is done because platfrom_add_devices() cannot
+ * be called from the map_io entry.
+*/
+
+struct s3c24xx_board {
+	struct platform_device  **devices;
+	unsigned int              devices_count;
+
+	struct clk		**clocks;
+	unsigned int		  clocks_count;
+};
+
+extern void s3c24xx_set_board(struct s3c24xx_board *board);
+
+

include/asm-arm/arch-omap/mcbsp.h

@@ -29,7 +29,7 @@
 #define OMAP730_MCBSP1_BASE	0xfffb1000
 #define OMAP730_MCBSP2_BASE	0xfffb1800
 
-#define OMAP1510_MCBSP1_BASE	0xe1011000
+#define OMAP1510_MCBSP1_BASE	0xe1011800
 #define OMAP1510_MCBSP2_BASE	0xfffb1000
 #define OMAP1510_MCBSP3_BASE	0xe1017000