Commit 6f72c3f9 authored by Gwendal Grignou's avatar Gwendal Grignou Committed by Lee Jones

mfd: cros_ec: add ec_align macros

To reduce code and improve performance of the embedded controller
firmware, pragma __aligned(2) or __aligned(4) are used when alignment to
16 or 32 bit boundary is expected.

Define all ec_align to packed when compiling kernel.
Signed-off-by: default avatarGwendal Grignou <gwendal@chromium.org>
Acked-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: default avatarBenson Leung <bleung@chromium.org>
Reviewed-by: default avatarFabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent df95a3bd
......@@ -188,12 +188,46 @@
#ifndef __ACPI__
/*
* Define __packed if someone hasn't beat us to it. Linux kernel style
* checking prefers __packed over __attribute__((packed)).
* Attributes for EC request and response packets. Just defining __packed
* results in inefficient assembly code on ARM, if the structure is actually
* 32-bit aligned, as it should be for all buffers.
*
* Be very careful when adding these to existing structures. They will round
* up the structure size to the specified boundary.
*
* Also be very careful to make that if a structure is included in some other
* parent structure that the alignment will still be true given the packing of
* the parent structure. This is particularly important if the sub-structure
* will be passed as a pointer to another function, since that function will
* not know about the misaligment caused by the parent structure's packing.
*
* Also be very careful using __packed - particularly when nesting non-packed
* structures inside packed ones. In fact, DO NOT use __packed directly;
* always use one of these attributes.
*
* Once everything is annotated properly, the following search strings should
* not return ANY matches in this file other than right here:
*
* "__packed" - generates inefficient code; all sub-structs must also be packed
*
* "struct [^_]" - all structs should be annotated, except for structs that are
* members of other structs/unions (and their original declarations should be
* annotated).
*/
/*
* Packed structures make no assumption about alignment, so they do inefficient
* byte-wise reads.
*/
#ifndef __packed
#define __packed __attribute__((packed))
#endif
#define __ec_align1 __packed
#define __ec_align2 __packed
#define __ec_align4 __packed
#define __ec_align_size1 __packed
#define __ec_align_offset1 __packed
#define __ec_align_offset2 __packed
#define __ec_todo_packed __packed
#define __ec_todo_unpacked
/* LPC command status byte masks */
/* EC has written a byte in the data register and host hasn't read it yet */
......@@ -317,7 +351,7 @@ struct ec_lpc_host_args {
uint8_t command_version;
uint8_t data_size;
uint8_t checksum;
} __packed;
} __ec_align4;
/* Flags for ec_lpc_host_args.flags */
/*
......@@ -488,7 +522,7 @@ struct ec_host_request {
uint8_t command_version;
uint8_t reserved;
uint16_t data_len;
} __packed;
} __ec_align4;
#define EC_HOST_RESPONSE_VERSION 3
......@@ -507,7 +541,7 @@ struct ec_host_response {
uint16_t result;
uint16_t data_len;
uint16_t reserved;
} __packed;
} __ec_align4;
/*****************************************************************************/
/*
......@@ -536,7 +570,7 @@ struct ec_host_response {
*/
struct ec_response_proto_version {
uint32_t version;
} __packed;
} __ec_align4;
/*
* Hello. This is a simple command to test the EC is responsive to
......@@ -550,7 +584,7 @@ struct ec_response_proto_version {
*/
struct ec_params_hello {
uint32_t in_data;
} __packed;
} __ec_align4;
/**
* struct ec_response_hello - Response to the hello command.
......@@ -558,7 +592,7 @@ struct ec_params_hello {
*/
struct ec_response_hello {
uint32_t out_data;
} __packed;
} __ec_align4;
/* Get version number */
#define EC_CMD_GET_VERSION 0x02
......@@ -581,7 +615,7 @@ struct ec_response_get_version {
char version_string_rw[32];
char reserved[32];
uint32_t current_image;
} __packed;
} __ec_align4;
/* Read test */
#define EC_CMD_READ_TEST 0x03
......@@ -594,7 +628,7 @@ struct ec_response_get_version {
struct ec_params_read_test {
uint32_t offset;
uint32_t size;
} __packed;
} __ec_align4;
/**
* struct ec_response_read_test - Response to the read test command.
......@@ -602,7 +636,7 @@ struct ec_params_read_test {
*/
struct ec_response_read_test {
uint32_t data[32];
} __packed;
} __ec_align4;
/*
* Get build information
......@@ -624,7 +658,7 @@ struct ec_response_get_chip_info {
char vendor[32];
char name[32];
char revision[32];
} __packed;
} __ec_align4;
/* Get board HW version */
#define EC_CMD_GET_BOARD_VERSION 0x06
......@@ -635,7 +669,7 @@ struct ec_response_get_chip_info {
*/
struct ec_response_board_version {
uint16_t board_version;
} __packed;
} __ec_align2;
/*
* Read memory-mapped data.
......@@ -655,7 +689,7 @@ struct ec_response_board_version {
struct ec_params_read_memmap {
uint8_t offset;
uint8_t size;
} __packed;
} __ec_align1;
/* Read versions supported for a command */
#define EC_CMD_GET_CMD_VERSIONS 0x08
......@@ -666,7 +700,7 @@ struct ec_params_read_memmap {
*/
struct ec_params_get_cmd_versions {
uint8_t cmd;
} __packed;
} __ec_align1;
/**
* struct ec_params_get_cmd_versions_v1 - Parameters for the get command
......@@ -675,7 +709,7 @@ struct ec_params_get_cmd_versions {
*/
struct ec_params_get_cmd_versions_v1 {
uint16_t cmd;
} __packed;
} __ec_align2;
/**
* struct ec_response_get_cmd_version - Response to the get command versions.
......@@ -684,7 +718,7 @@ struct ec_params_get_cmd_versions_v1 {
*/
struct ec_response_get_cmd_versions {
uint32_t version_mask;
} __packed;
} __ec_align4;
/*
* Check EC communications status (busy). This is needed on i2c/spi but not
......@@ -707,7 +741,7 @@ enum ec_comms_status {
*/
struct ec_response_get_comms_status {
uint32_t flags; /* Mask of enum ec_comms_status */
} __packed;
} __ec_align4;
/* Fake a variety of responses, purely for testing purposes. */
#define EC_CMD_TEST_PROTOCOL 0x0a
......@@ -717,12 +751,12 @@ struct ec_params_test_protocol {
uint32_t ec_result;
uint32_t ret_len;
uint8_t buf[32];
} __packed;
} __ec_align4;
/* Here it comes... */
struct ec_response_test_protocol {
uint8_t buf[32];
} __packed;
} __ec_align4;
/* Get protocol information */
#define EC_CMD_GET_PROTOCOL_INFO 0x0b
......@@ -745,7 +779,7 @@ struct ec_response_get_protocol_info {
uint16_t max_request_packet_size;
uint16_t max_response_packet_size;
uint32_t flags;
} __packed;
} __ec_align4;
/*****************************************************************************/
......@@ -763,12 +797,12 @@ struct ec_response_get_protocol_info {
struct ec_params_get_set_value {
uint32_t flags;
uint32_t value;
} __packed;
} __ec_align4;
struct ec_response_get_set_value {
uint32_t flags;
uint32_t value;
} __packed;
} __ec_align4;
/* More than one command can use these structs to get/set parameters. */
#define EC_CMD_GSV_PAUSE_IN_S5 0x0c
......@@ -893,7 +927,7 @@ enum ec_feature_code {
struct ec_response_get_features {
uint32_t flags[2];
} __packed;
} __ec_align4;
/*****************************************************************************/
/* Flash commands */
......@@ -918,7 +952,7 @@ struct ec_response_flash_info {
uint32_t write_block_size;
uint32_t erase_block_size;
uint32_t protect_block_size;
} __packed;
} __ec_align4;
/*
* Flags for version 1+ flash info command
......@@ -959,7 +993,7 @@ struct ec_response_flash_info_1 {
/* Version 1 adds these fields: */
uint32_t write_ideal_size;
uint32_t flags;
} __packed;
} __ec_align4;
/*
* Read flash
......@@ -976,7 +1010,7 @@ struct ec_response_flash_info_1 {
struct ec_params_flash_read {
uint32_t offset;
uint32_t size;
} __packed;
} __ec_align4;
/* Write flash */
#define EC_CMD_FLASH_WRITE 0x12
......@@ -994,7 +1028,7 @@ struct ec_params_flash_write {
uint32_t offset;
uint32_t size;
/* Followed by data to write */
} __packed;
} __ec_align4;
/* Erase flash */
#define EC_CMD_FLASH_ERASE 0x13
......@@ -1007,7 +1041,7 @@ struct ec_params_flash_write {
struct ec_params_flash_erase {
uint32_t offset;
uint32_t size;
} __packed;
} __ec_align4;
/*
* Get/set flash protection.
......@@ -1053,7 +1087,7 @@ struct ec_params_flash_erase {
struct ec_params_flash_protect {
uint32_t mask;
uint32_t flags;
} __packed;
} __ec_align4;
/**
* struct ec_response_flash_protect - Response to the flash protect command.
......@@ -1068,7 +1102,7 @@ struct ec_response_flash_protect {
uint32_t flags;
uint32_t valid_flags;
uint32_t writable_flags;
} __packed;
} __ec_align4;
/*
* Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash
......@@ -1100,12 +1134,12 @@ enum ec_flash_region {
*/
struct ec_params_flash_region_info {
uint32_t region;
} __packed;
} __ec_align4;
struct ec_response_flash_region_info {
uint32_t offset;
uint32_t size;
} __packed;
} __ec_align4;
/* Read/write VbNvContext */
#define EC_CMD_VBNV_CONTEXT 0x17
......@@ -1120,11 +1154,11 @@ enum ec_vbnvcontext_op {
struct ec_params_vbnvcontext {
uint32_t op;
uint8_t block[EC_VBNV_BLOCK_SIZE];
} __packed;
} __ec_align4;
struct ec_response_vbnvcontext {
uint8_t block[EC_VBNV_BLOCK_SIZE];
} __packed;
} __ec_align4;
/*****************************************************************************/
/* PWM commands */
......@@ -1134,14 +1168,14 @@ struct ec_response_vbnvcontext {
struct ec_response_pwm_get_fan_rpm {
uint32_t rpm;
} __packed;
} __ec_align4;
/* Set target fan RPM */
#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x21
#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021
struct ec_params_pwm_set_fan_target_rpm {
uint32_t rpm;
} __packed;
} __ec_align_size1;
/* Get keyboard backlight */
#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
......@@ -1149,21 +1183,21 @@ struct ec_params_pwm_set_fan_target_rpm {
struct ec_response_pwm_get_keyboard_backlight {
uint8_t percent;
uint8_t enabled;
} __packed;
} __ec_align1;
/* Set keyboard backlight */
#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
struct ec_params_pwm_set_keyboard_backlight {
uint8_t percent;
} __packed;
} __ec_align1;
/* Set target fan PWM duty cycle */
#define EC_CMD_PWM_SET_FAN_DUTY 0x24
struct ec_params_pwm_set_fan_duty {
uint32_t percent;
} __packed;
} __ec_align4;
#define EC_CMD_PWM_SET_DUTY 0x25
/* 16 bit duty cycle, 0xffff = 100% */
......@@ -1183,18 +1217,18 @@ struct ec_params_pwm_set_duty {
uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
uint8_t pwm_type; /* ec_pwm_type */
uint8_t index; /* Type-specific index, or 0 if unique */
} __packed;
} __ec_align4;
#define EC_CMD_PWM_GET_DUTY 0x26
struct ec_params_pwm_get_duty {
uint8_t pwm_type; /* ec_pwm_type */
uint8_t index; /* Type-specific index, or 0 if unique */
} __packed;
} __ec_align1;
struct ec_response_pwm_get_duty {
uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
} __packed;
} __ec_align2;
/*****************************************************************************/
/*
......@@ -1207,7 +1241,7 @@ struct ec_response_pwm_get_duty {
struct rgb_s {
uint8_t r, g, b;
};
} __ec_todo_unpacked;
#define LB_BATTERY_LEVELS 4
......@@ -1247,7 +1281,7 @@ struct lightbar_params_v0 {
/* Color palette */
struct rgb_s color[8]; /* 0-3 are Google colors */
} __packed;
} __ec_todo_packed;
struct lightbar_params_v1 {
/* Timing */
......@@ -1290,14 +1324,14 @@ struct lightbar_params_v1 {
/* Color palette */
struct rgb_s color[8]; /* 0-3 are Google colors */
} __packed;
} __ec_todo_packed;
/* Lightbar program */
#define EC_LB_PROG_LEN 192
struct lightbar_program {
uint8_t size;
uint8_t data[EC_LB_PROG_LEN];
};
} __ec_todo_unpacked;
struct ec_params_lightbar {
uint8_t cmd; /* Command (see enum lightbar_command) */
......@@ -1307,23 +1341,23 @@ struct ec_params_lightbar {
} dump, off, on, init, get_seq, get_params_v0, get_params_v1,
version, get_brightness, get_demo, suspend, resume;
struct {
struct __ec_todo_unpacked {
uint8_t num;
} set_brightness, seq, demo;
struct {
struct __ec_todo_unpacked {
uint8_t ctrl, reg, value;
} reg;
struct {
struct __ec_todo_unpacked {
uint8_t led, red, green, blue;
} set_rgb;
struct {
struct __ec_todo_unpacked {
uint8_t led;
} get_rgb;
struct {
struct __ec_todo_unpacked {
uint8_t enable;
} manual_suspend_ctrl;
......@@ -1331,31 +1365,31 @@ struct ec_params_lightbar {
struct lightbar_params_v1 set_params_v1;
struct lightbar_program set_program;
};
} __packed;
} __ec_todo_packed;
struct ec_response_lightbar {
union {
struct {
struct {
struct __ec_todo_unpacked {
struct __ec_todo_unpacked {
uint8_t reg;
uint8_t ic0;
uint8_t ic1;
} vals[23];
} dump;
struct {
struct __ec_todo_unpacked {
uint8_t num;
} get_seq, get_brightness, get_demo;
struct lightbar_params_v0 get_params_v0;
struct lightbar_params_v1 get_params_v1;
struct {
struct __ec_todo_unpacked {
uint32_t num;
uint32_t flags;
} version;
struct {
struct __ec_todo_unpacked {
uint8_t red, green, blue;
} get_rgb;
......@@ -1365,7 +1399,7 @@ struct ec_response_lightbar {
demo, set_params_v0, set_params_v1,
set_program, manual_suspend_ctrl, suspend, resume;
};
} __packed;
} __ec_todo_packed;
/* Lightbar commands */
enum lightbar_command {
......@@ -1432,7 +1466,7 @@ struct ec_params_led_control {
uint8_t flags; /* Control flags */
uint8_t brightness[EC_LED_COLOR_COUNT];
} __packed;
} __ec_align1;
struct ec_response_led_control {
/*
......@@ -1443,7 +1477,7 @@ struct ec_response_led_control {
* Other values means the LED is control by PWM.
*/
uint8_t brightness_range[EC_LED_COLOR_COUNT];
} __packed;
} __ec_align1;
/*****************************************************************************/
/* Verified boot commands */
......@@ -1464,7 +1498,7 @@ struct ec_params_vboot_hash {
uint32_t offset; /* Offset in flash to hash */
uint32_t size; /* Number of bytes to hash */
uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */
} __packed;
} __ec_align4;
struct ec_response_vboot_hash {
uint8_t status; /* enum ec_vboot_hash_status */
......@@ -1474,7 +1508,7 @@ struct ec_response_vboot_hash {
uint32_t offset; /* Offset in flash which was hashed */
uint32_t size; /* Number of bytes hashed */
uint8_t hash_digest[64]; /* Hash digest data */
} __packed;
} __ec_align4;
enum ec_vboot_hash_cmd {
EC_VBOOT_HASH_GET = 0, /* Get current hash status */
......@@ -1634,23 +1668,23 @@ struct ec_response_motion_sensor_data {
/* Each sensor is up to 3-axis. */
union {
int16_t data[3];
struct {
struct __ec_todo_packed {
uint16_t reserved;
uint32_t timestamp;
} __packed;
struct {
};
struct __ec_todo_unpacked {
uint8_t activity; /* motionsensor_activity */
uint8_t state;
int16_t add_info[2];
};
};
} __packed;
} __ec_todo_packed;
struct ec_params_motion_sense {
uint8_t cmd;
union {
/* Used for MOTIONSENSE_CMD_DUMP. */
struct {
struct __ec_todo_unpacked {
/* no args */
} dump;
......@@ -1658,13 +1692,13 @@ struct ec_params_motion_sense {
* Used for MOTIONSENSE_CMD_EC_RATE and
* MOTIONSENSE_CMD_KB_WAKE_ANGLE.
*/
struct {
struct __ec_todo_unpacked {
/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
int16_t data;
} ec_rate, kb_wake_angle;
/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
struct {
struct __ec_todo_packed {
uint8_t sensor_num;
/*
......@@ -1690,10 +1724,10 @@ struct ec_params_motion_sense {
* Compass: 1/16 uT
*/
int16_t offset[3];
} __packed sensor_offset;
} sensor_offset;
/* Used for MOTIONSENSE_CMD_INFO. */
struct {
struct __ec_todo_packed {
uint8_t sensor_num;
} info;
......@@ -1714,12 +1748,12 @@ struct ec_params_motion_sense {
int32_t data;
} sensor_odr, sensor_range;
};
} __packed;
} __ec_todo_packed;
struct ec_response_motion_sense {
union {
/* Used for MOTIONSENSE_CMD_DUMP. */
struct {
struct __ec_todo_unpacked {
/* Flags representing the motion sensor module. */
uint8_t module_flags;
......@@ -1734,7 +1768,7 @@ struct ec_response_motion_sense {
} dump;
/* Used for MOTIONSENSE_CMD_INFO. */
struct {
struct __ec_todo_unpacked {
/* Should be element of enum motionsensor_type. */
uint8_t type;
......@@ -1753,18 +1787,18 @@ struct ec_response_motion_sense {
* MOTIONSENSE_CMD_SENSOR_RANGE, and
* MOTIONSENSE_CMD_KB_WAKE_ANGLE.
*/
struct {
struct __ec_todo_unpacked {
/* Current value of the parameter queried. */
int32_t ret;
} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
/* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */
struct {
struct __ec_todo_unpacked {
int16_t temp;
int16_t offset[3];
} sensor_offset, perform_calib;
};
} __packed;
} __ec_todo_packed;
/*****************************************************************************/
/* USB charging control commands */
......@@ -1775,7 +1809,7 @@ struct ec_response_motion_sense {
struct ec_params_usb_charge_set_mode {
uint8_t usb_port_id;
uint8_t mode;
} __packed;
} __ec_align1;
/*****************************************************************************/
/* Persistent storage for host */
......@@ -1791,7 +1825,7 @@ struct ec_response_pstore_info {
uint32_t pstore_size;
/* Access size; read/write offset and size must be a multiple of this */
uint32_t access_size;
} __packed;
} __ec_align4;
/*
* Read persistent storage
......@@ -1803,7 +1837,7 @@ struct ec_response_pstore_info {
struct ec_params_pstore_read {
uint32_t offset; /* Byte offset to read */
uint32_t size; /* Size to read in bytes */
} __packed;
} __ec_align4;
/* Write persistent storage */
#define EC_CMD_PSTORE_WRITE 0x42
......@@ -1812,7 +1846,7 @@ struct ec_params_pstore_write {
uint32_t offset; /* Byte offset to write */
uint32_t size; /* Size to write in bytes */
uint8_t data[EC_PSTORE_SIZE_MAX];
} __packed;
} __ec_align4;
/*****************************************************************************/
/* Real-time clock */
......@@ -1820,11 +1854,11 @@ struct ec_params_pstore_write {
/* RTC params and response structures */
struct ec_params_rtc {
uint32_t time;
} __packed;
} __ec_align4;
struct ec_response_rtc {
uint32_t time;
} __packed;
} __ec_align4;
/* These use ec_response_rtc */
#define EC_CMD_RTC_GET_VALUE 0x44
......@@ -1855,29 +1889,29 @@ enum ec_port80_subcmd {
struct ec_params_port80_read {
uint16_t subcmd;
union {
struct {
struct __ec_todo_unpacked {
uint32_t offset;
uint32_t num_entries;
} read_buffer;
};
} __packed;
} __ec_todo_packed;
struct ec_response_port80_read {
union {
struct {
struct __ec_todo_unpacked {
uint32_t writes;
uint32_t history_size;
uint32_t last_boot;
} get_info;
struct {
struct __ec_todo_unpacked {
uint16_t codes[EC_PORT80_SIZE_MAX];
} data;
};
} __packed;
} __ec_todo_packed;
struct ec_response_port80_last_boot {
uint16_t code;
} __packed;
} __ec_align2;
/*****************************************************************************/
/* Thermal engine commands. Note that there are two implementations. We'll
......@@ -1898,17 +1932,17 @@ struct ec_params_thermal_set_threshold {
uint8_t sensor_type;
uint8_t threshold_id;
uint16_t value;
} __packed;
} __ec_align2;
/* Version 0 - get */
struct ec_params_thermal_get_threshold {
uint8_t sensor_type;
uint8_t threshold_id;
} __packed;
} __ec_align1;
struct ec_response_thermal_get_threshold {
uint16_t value;
} __packed;
} __ec_align2;
/* The version 1 structs are visible. */
......@@ -1928,12 +1962,12 @@ struct ec_thermal_config {
uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
uint32_t temp_fan_off; /* no active cooling needed */
uint32_t temp_fan_max; /* max active cooling needed */
} __packed;
} __ec_align4;
/* Version 1 - get config for one sensor. */
struct ec_params_thermal_get_threshold_v1 {
uint32_t sensor_num;
} __packed;
} __ec_align4;
/* This returns a struct ec_thermal_config */
/*
......@@ -1943,7 +1977,7 @@ struct ec_params_thermal_get_threshold_v1 {
struct ec_params_thermal_set_threshold_v1 {
uint32_t sensor_num;
struct ec_thermal_config cfg;
} __packed;
} __ec_align4;
/* This returns no data */
/****************************************************************************/
......@@ -1956,14 +1990,14 @@ struct ec_params_thermal_set_threshold_v1 {
struct ec_params_tmp006_get_calibration {
uint8_t index;
} __packed;
} __ec_align1;
struct ec_response_tmp006_get_calibration {
float s0;
float b0;
float b1;
float b2;
} __packed;
} __ec_align4;
/* Set TMP006 calibration data */
#define EC_CMD_TMP006_SET_CALIBRATION 0x54
......@@ -1975,19 +2009,19 @@ struct ec_params_tmp006_set_calibration {
float b0;
float b1;
float b2;
} __packed;
} __ec_align4;
/* Read raw TMP006 data */
#define EC_CMD_TMP006_GET_RAW 0x55
struct ec_params_tmp006_get_raw {
uint8_t index;
} __packed;
} __ec_align1;
struct ec_response_tmp006_get_raw {
int32_t t; /* In 1/100 K */
int32_t v; /* In nV */
};
} __ec_align4;
/*****************************************************************************/
/* MKBP - Matrix KeyBoard Protocol */
......@@ -2014,12 +2048,12 @@ struct ec_response_mkbp_info {
uint32_t cols;
/* Formerly "switches", which was 0. */
uint8_t reserved;
} __packed;
} __ec_align_size1;
struct ec_params_mkbp_info {
uint8_t info_type;
uint8_t event_type;
} __packed;
} __ec_align1;
enum ec_mkbp_info_type {
/*
......@@ -2067,7 +2101,7 @@ struct ec_params_mkbp_simulate_key {
uint8_t col;
uint8_t row;
uint8_t pressed;
} __packed;
} __ec_align1;
/* Configure keyboard scanning */
#define EC_CMD_MKBP_SET_CONFIG 0x64
......@@ -2113,15 +2147,15 @@ struct ec_mkbp_config {
uint16_t debounce_up_us; /* time for debounce on key up */
/* maximum depth to allow for fifo (0 = no keyscan output) */
uint8_t fifo_max_depth;
} __packed;
} __ec_align_size1;
struct ec_params_mkbp_set_config {
struct ec_mkbp_config config;
} __packed;
} __ec_align_size1;
struct ec_response_mkbp_get_config {
struct ec_mkbp_config config;
} __packed;
} __ec_align_size1;
/* Run the key scan emulation */
#define EC_CMD_KEYSCAN_SEQ_CTRL 0x66
......@@ -2144,18 +2178,18 @@ enum ec_collect_flags {
struct ec_collect_item {
uint8_t flags; /* some flags (enum ec_collect_flags) */
};
} __ec_align1;
struct ec_params_keyscan_seq_ctrl {
uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */
union {
struct {
struct __ec_align1 {
uint8_t active; /* still active */
uint8_t num_items; /* number of items */
/* Current item being presented */
uint8_t cur_item;
} status;
struct {
struct __ec_todo_unpacked {
/*
* Absolute time for this scan, measured from the
* start of the sequence.
......@@ -2163,22 +2197,22 @@ struct ec_params_keyscan_seq_ctrl {
uint32_t time_us;
uint8_t scan[0]; /* keyscan data */
} add;
struct {
struct __ec_align1 {
uint8_t start_item; /* First item to return */
uint8_t num_items; /* Number of items to return */
} collect;
};
} __packed;
} __ec_todo_packed;
struct ec_result_keyscan_seq_ctrl {
union {
struct {
struct __ec_todo_unpacked {
uint8_t num_items; /* Number of items */
/* Data for each item */
struct ec_collect_item item[0];
} collect;
};
} __packed;
} __ec_todo_packed;
/*
* Command for retrieving the next pending MKBP event from the EC device
......@@ -2216,7 +2250,7 @@ enum ec_mkbp_event {
EC_MKBP_EVENT_COUNT,
};
union ec_response_get_next_data {
union __ec_align_offset1 ec_response_get_next_data {
uint8_t key_matrix[13];
/* Unaligned */
......@@ -2225,9 +2259,9 @@ union ec_response_get_next_data {
uint32_t buttons;
uint32_t switches;
uint32_t sysrq;
} __packed;
};
union ec_response_get_next_data_v1 {
union __ec_align_offset1 ec_response_get_next_data_v1 {
uint8_t key_matrix[16];
uint32_t host_event;
uint32_t buttons;
......@@ -2235,19 +2269,19 @@ union ec_response_get_next_data_v1 {
uint32_t sysrq;
uint32_t cec_events;
uint8_t cec_message[16];
} __packed;
};
struct ec_response_get_next_event {
uint8_t event_type;
/* Followed by event data if any */
union ec_response_get_next_data data;
} __packed;
} __ec_align1;
struct ec_response_get_next_event_v1 {
uint8_t event_type;
/* Followed by event data if any */
union ec_response_get_next_data_v1 data;
} __packed;
} __ec_align1;
/* Bit indices for buttons and switches.*/
/* Buttons */
......@@ -2268,12 +2302,12 @@ struct ec_response_get_next_event_v1 {
struct ec_params_temp_sensor_get_info {
uint8_t id;
} __packed;
} __ec_align1;
struct ec_response_temp_sensor_get_info {
char sensor_name[32];
uint8_t sensor_type;
} __packed;
} __ec_align1;
/*****************************************************************************/
......@@ -2292,11 +2326,11 @@ struct ec_response_temp_sensor_get_info {
*/
struct ec_params_host_event_mask {
uint32_t mask;
} __packed;
} __ec_align4;
struct ec_response_host_event_mask {
uint32_t mask;
} __packed;
} __ec_align4;
/* These all use ec_response_host_event_mask */
#define EC_CMD_HOST_EVENT_GET_B 0x87
......@@ -2319,7 +2353,7 @@ struct ec_response_host_event_mask {
struct ec_params_switch_enable_backlight {
uint8_t enabled;
} __packed;
} __ec_align1;
/* Enable/disable WLAN/Bluetooth */
#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
......@@ -2328,7 +2362,7 @@ struct ec_params_switch_enable_backlight {
/* Version 0 params; no response */
struct ec_params_switch_enable_wireless_v0 {
uint8_t enabled;
} __packed;
} __ec_align1;
/* Version 1 params */
struct ec_params_switch_enable_wireless_v1 {
......@@ -2347,7 +2381,7 @@ struct ec_params_switch_enable_wireless_v1 {
/* Which flags to copy from suspend_flags */
uint8_t suspend_mask;
} __packed;
} __ec_align1;
/* Version 1 response */
struct ec_response_switch_enable_wireless_v1 {
......@@ -2356,7 +2390,7 @@ struct ec_response_switch_enable_wireless_v1 {
/* Flags to leave enabled in S3 */
uint8_t suspend_flags;
} __packed;
} __ec_align1;
/*****************************************************************************/
/* GPIO commands. Only available on EC if write protect has been disabled. */
......@@ -2367,7 +2401,7 @@ struct ec_response_switch_enable_wireless_v1 {
struct ec_params_gpio_set {
char name[32];
uint8_t val;
} __packed;
} __ec_align1;
/* Get GPIO value */
#define EC_CMD_GPIO_GET 0x93
......@@ -2375,37 +2409,37 @@ struct ec_params_gpio_set {
/* Version 0 of input params and response */
struct ec_params_gpio_get {
char name[32];
} __packed;
} __ec_align1;
struct ec_response_gpio_get {
uint8_t val;
} __packed;
} __ec_align1;
/* Version 1 of input params and response */
struct ec_params_gpio_get_v1 {
uint8_t subcmd;
union {
struct {
struct __ec_align1 {
char name[32];
} get_value_by_name;
struct {
struct __ec_align1 {
uint8_t index;
} get_info;
};
} __packed;
} __ec_align1;
struct ec_response_gpio_get_v1 {
union {
struct {
struct __ec_align1 {
uint8_t val;
} get_value_by_name, get_count;
struct {
struct __ec_todo_unpacked {
uint8_t val;
char name[32];
uint32_t flags;
} get_info;
};
} __packed;
} __ec_todo_packed;
enum gpio_get_subcmd {
EC_GPIO_GET_BY_NAME = 0,
......@@ -2431,11 +2465,11 @@ struct ec_params_i2c_read {
uint8_t read_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
} __packed;
} __ec_align_size1;
struct ec_response_i2c_read {
uint16_t data;
} __packed;
} __ec_align2;
/* Write I2C bus */
#define EC_CMD_I2C_WRITE 0x95
......@@ -2446,7 +2480,7 @@ struct ec_params_i2c_write {
uint8_t write_size; /* Either 8 or 16. */
uint8_t port;
uint8_t offset;
} __packed;
} __ec_align_size1;
/*****************************************************************************/
/* Charge state commands. Only available when flash write protect unlocked. */
......@@ -2465,7 +2499,7 @@ enum ec_charge_control_mode {
struct ec_params_charge_control {
uint32_t mode; /* enum charge_control_mode */
} __packed;
} __ec_align4;
/*****************************************************************************/
......@@ -2493,7 +2527,7 @@ enum ec_console_read_subcmd {
struct ec_params_console_read_v1 {
uint8_t subcmd; /* enum ec_console_read_subcmd */
} __packed;
} __ec_align1;
/*****************************************************************************/
......@@ -2511,7 +2545,7 @@ struct ec_params_console_read_v1 {
struct ec_params_battery_cutoff {
uint8_t flags;
} __packed;
} __ec_align1;
/*****************************************************************************/
/* USB port mux control. */
......@@ -2523,7 +2557,7 @@ struct ec_params_battery_cutoff {
struct ec_params_usb_mux {
uint8_t mux;
} __packed;
} __ec_align1;
/*****************************************************************************/
/* LDOs / FETs control. */
......@@ -2541,7 +2575,7 @@ enum ec_ldo_state {
struct ec_params_ldo_set {
uint8_t index;
uint8_t state;
} __packed;
} __ec_align1;
/*
* Get LDO state.
......@@ -2550,11 +2584,11 @@ struct ec_params_ldo_set {
struct ec_params_ldo_get {
uint8_t index;
} __packed;
} __ec_align1;
struct ec_response_ldo_get {
uint8_t state;
} __packed;
} __ec_align1;
/*****************************************************************************/
/* Power info. */
......@@ -2570,7 +2604,7 @@ struct ec_response_power_info {
uint16_t voltage_system;
uint16_t current_system;
uint16_t usb_current_limit;
} __packed;
} __ec_align4;
/*****************************************************************************/
/* I2C passthru command */
......@@ -2592,20 +2626,20 @@ struct ec_response_power_info {
struct ec_params_i2c_passthru_msg {
uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
uint16_t len; /* Number of bytes to read or write */
} __packed;
} __ec_align2;
struct ec_params_i2c_passthru {
uint8_t port; /* I2C port number */
uint8_t num_msgs; /* Number of messages */
struct ec_params_i2c_passthru_msg msg[];
/* Data to write for all messages is concatenated here */
} __packed;
} __ec_align2;
struct ec_response_i2c_passthru {
uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */
uint8_t num_msgs; /* Number of messages processed */
uint8_t data[]; /* Data read by messages concatenated here */
} __packed;
} __ec_align1;
/*****************************************************************************/
/* Power button hang detect */
......@@ -2660,7 +2694,7 @@ struct ec_params_hang_detect {
/* Timeout in msec before generating warm reboot, if enabled */
uint16_t warm_reboot_timeout_msec;
} __packed;
} __ec_align4;
/*****************************************************************************/
/* Commands for battery charging */
......@@ -2706,20 +2740,20 @@ struct ec_params_charge_state {
/* no args */
} get_state;
struct {
struct __ec_todo_unpacked {
uint32_t param; /* enum charge_state_param */
} get_param;
struct {
struct __ec_todo_unpacked {
uint32_t param; /* param to set */
uint32_t value; /* value to set */
} set_param;
};
} __packed;
} __ec_todo_packed;
struct ec_response_charge_state {
union {
struct {
struct __ec_align4 {
int ac;
int chg_voltage;
int chg_current;
......@@ -2727,14 +2761,14 @@ struct ec_response_charge_state {
int batt_state_of_charge;
} get_state;
struct {
struct __ec_align4 {
uint32_t value;
} get_param;
struct {
/* no return values */
} set_param;
};
} __packed;
} __ec_align4;
/*
......@@ -2744,7 +2778,7 @@ struct ec_response_charge_state {
struct ec_params_current_limit {
uint32_t limit; /* in mA */
} __packed;
} __ec_align4;
/*
* Set maximum external voltage / current.
......@@ -2755,7 +2789,7 @@ struct ec_params_current_limit {
struct ec_params_external_power_limit_v1 {
uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */
uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */
} __packed;
} __ec_align2;
#define EC_POWER_LIMIT_NONE 0xffff
......@@ -2771,7 +2805,7 @@ enum host_sleep_event {
struct ec_params_host_sleep_event {
uint8_t sleep_event;
} __packed;
} __ec_align1;
/*
* Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep
......@@ -2802,7 +2836,7 @@ struct ec_params_host_sleep_event_v1 {
/* No parameters for non-suspend messages. */
};
} __packed;
} __ec_align2;
/* A timeout occurred when this bit is set */
#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000
......@@ -2828,7 +2862,7 @@ struct ec_response_host_sleep_event_v1 {
/* No response fields for non-resume messages. */
};
} __packed;
} __ec_align4;
/*****************************************************************************/
/* Smart battery pass-through */
......@@ -2845,25 +2879,25 @@ struct ec_response_host_sleep_event_v1 {
struct ec_params_sb_rd {
uint8_t reg;
} __packed;
} __ec_align1;
struct ec_response_sb_rd_word {
uint16_t value;
} __packed;
} __ec_align2;
struct ec_params_sb_wr_word {
uint8_t reg;
uint16_t value;
} __packed;
} __ec_align1;
struct ec_response_sb_rd_block {
uint8_t data[32];
} __packed;
} __ec_align1;
struct ec_params_sb_wr_block {
uint8_t reg;
uint16_t data[32];
} __packed;
} __ec_align1;
/*****************************************************************************/
/* Battery vendor parameters
......@@ -2885,11 +2919,11 @@ struct ec_params_battery_vendor_param {
uint32_t param;
uint32_t value;
uint8_t mode;
} __packed;
} __ec_align_size1;
struct ec_response_battery_vendor_param {
uint32_t value;
} __packed;
} __ec_align4;
/*****************************************************************************/
/* Commands for I2S recording on audio codec. */
......@@ -2920,7 +2954,7 @@ enum ec_i2s_config {
EC_DAI_FMT_PCM_TDM = 5,
};
struct ec_param_codec_i2s {
struct __ec_todo_packed ec_param_codec_i2s {
/* enum ec_codec_i2s_subcmd */
uint8_t cmd;
union {
......@@ -2934,10 +2968,10 @@ struct ec_param_codec_i2s {
* EC_CODEC_SET_GAIN
* Value should be 0~43 for both channels.
*/
struct ec_param_codec_i2s_set_gain {
struct __ec_align1 ec_param_codec_i2s_set_gain {
uint8_t left;
uint8_t right;
} __packed gain;
} gain;
/*
* EC_CODEC_I2S_ENABLE
......@@ -2955,7 +2989,7 @@ struct ec_param_codec_i2s {
* EC_CODEC_I2S_SET_TDM_CONFIG
* Value should be one of ec_i2s_config.
*/
struct ec_param_codec_i2s_tdm {
struct __ec_todo_unpacked ec_param_codec_i2s_tdm {
/*
* 0 to 496
*/
......@@ -2966,14 +3000,14 @@ struct ec_param_codec_i2s {
int16_t ch1_delay;
uint8_t adjacent_to_ch0;
uint8_t adjacent_to_ch1;
} __packed tdm_param;
} tdm_param;
/*
* EC_CODEC_I2S_SET_BCLK
*/
uint32_t bclk;
};
} __packed;
};
/*
* For subcommand EC_CODEC_GET_GAIN.
......@@ -2981,7 +3015,7 @@ struct ec_param_codec_i2s {
struct ec_response_codec_gain {
uint8_t left;
uint8_t right;
} __packed;
} __ec_align1;
/*****************************************************************************/
/* System commands */
......@@ -3010,7 +3044,7 @@ enum ec_reboot_cmd {
struct ec_params_reboot_ec {
uint8_t cmd; /* enum ec_reboot_cmd */
uint8_t flags; /* See EC_REBOOT_FLAG_* */
} __packed;
} __ec_align1;
/*
* Get information on last EC panic.
......@@ -3153,7 +3187,7 @@ struct ec_params_reboot_ec {
*/
struct ec_params_cec_write {
uint8_t msg[EC_MAX_CEC_MSG_LEN];
} __packed;
} __ec_align1;
/* Set various CEC parameters */
#define EC_CMD_CEC_SET 0x00BA
......@@ -3169,7 +3203,7 @@ struct ec_params_cec_write {
struct ec_params_cec_set {
uint8_t cmd; /* enum cec_command */
uint8_t val;
} __packed;
} __ec_align1;
/* Read various CEC parameters */
#define EC_CMD_CEC_GET 0x00BB
......@@ -3180,7 +3214,7 @@ struct ec_params_cec_set {
*/
struct ec_params_cec_get {
uint8_t cmd; /* enum cec_command */
} __packed;
} __ec_align1;
/**
* struct ec_response_cec_get - CEC parameters get response
......@@ -3191,7 +3225,7 @@ struct ec_params_cec_get {
*/
struct ec_response_cec_get {
uint8_t val;
} __packed;
} __ec_align1;
/* CEC parameters command */
enum ec_cec_command {
......@@ -3264,13 +3298,13 @@ enum mkbp_cec_event {
/* Status of EC being sent to PD */
struct ec_params_pd_status {
int8_t batt_soc; /* battery state of charge */
} __packed;
} __ec_align1;
/* Status of PD being sent back to EC */
struct ec_response_pd_status {
int8_t status; /* PD MCU status */
uint32_t curr_lim_ma; /* input current limit */
} __packed;
} __ec_align_size1;
/* Set USB type-C port role and muxes */
#define EC_CMD_USB_PD_CONTROL 0x101
......@@ -3305,7 +3339,7 @@ struct ec_params_usb_pd_control {
uint8_t role;
uint8_t mux;
uint8_t swap;
} __packed;
} __ec_align1;
#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */
#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */
......@@ -3324,7 +3358,7 @@ struct ec_response_usb_pd_control_v1 {
uint8_t role;
uint8_t polarity;
char state[32];
} __packed;
} __ec_align1;
#define EC_CMD_USB_PD_PORTS 0x102
......@@ -3333,14 +3367,14 @@ struct ec_response_usb_pd_control_v1 {
struct ec_response_usb_pd_ports {
uint8_t num_ports;
} __packed;
} __ec_align1;
#define EC_CMD_USB_PD_POWER_INFO 0x103
#define PD_POWER_CHARGING_PORT 0xff
struct ec_params_usb_pd_power_info {
uint8_t port;
} __packed;
} __ec_align1;
enum usb_chg_type {
USB_CHG_TYPE_NONE,
......@@ -3366,7 +3400,7 @@ struct usb_chg_measures {
uint16_t voltage_now;
uint16_t current_max;
uint16_t current_lim;
} __packed;
} __ec_align2;
struct ec_response_usb_pd_power_info {
uint8_t role;
......@@ -3375,11 +3409,11 @@ struct ec_response_usb_pd_power_info {
uint8_t reserved1;
struct usb_chg_measures meas;
uint32_t max_power;
} __packed;
} __ec_align4;
struct ec_params_usb_pd_info_request {
uint8_t port;
} __packed;
} __ec_align1;
/*
* This command will return the number of USB PD charge port + the number
......@@ -3389,7 +3423,7 @@ struct ec_params_usb_pd_info_request {
#define EC_CMD_CHARGE_PORT_COUNT 0x0105
struct ec_response_charge_port_count {
uint8_t port_count;
} __packed;
} __ec_align1;
/* Read USB-PD Device discovery info */
#define EC_CMD_USB_PD_DISCOVERY 0x0113
......@@ -3397,7 +3431,7 @@ struct ec_params_usb_pd_discovery_entry {
uint16_t vid; /* USB-IF VID */
uint16_t pid; /* USB-IF PID */
uint8_t ptype; /* product type (hub,periph,cable,ama) */
} __packed;
} __ec_align_size1;
/* Override default charge behavior */
#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114
......@@ -3411,7 +3445,7 @@ enum usb_pd_override_ports {
struct ec_params_charge_port_override {
int16_t override_port; /* Override port# */
} __packed;
} __ec_align2;
/* Read (and delete) one entry of PD event log */
#define EC_CMD_PD_GET_LOG_ENTRY 0x0115
......@@ -3422,7 +3456,7 @@ struct ec_response_pd_log {
uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */
uint16_t data; /* type-defined data payload */
uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */
} __packed;
} __ec_align4;
/* The timestamp is the microsecond counter shifted to get about a ms. */
#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */
......@@ -3488,14 +3522,14 @@ struct mcdp_version {
uint8_t major;
uint8_t minor;
uint16_t build;
} __packed;
} __ec_align4;
struct mcdp_info {
uint8_t family[2];
uint8_t chipid[2];
struct mcdp_version irom;
struct mcdp_version fw;
} __packed;
} __ec_align4;
/* struct mcdp_info field decoding */
#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1])
......@@ -3506,7 +3540,7 @@ struct mcdp_info {
struct ec_params_usb_pd_mux_info {
uint8_t port; /* USB-C port number */
} __packed;
} __ec_align1;
/* Flags representing mux state */
#define USB_PD_MUX_USB_ENABLED (1 << 0)
......@@ -3516,7 +3550,7 @@ struct ec_params_usb_pd_mux_info {
struct ec_response_usb_pd_mux_info {
uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
} __packed;
} __ec_align1;
/*****************************************************************************/
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment