Commit 6fe62a8c authored by Manikanta Pubbisetty's avatar Manikanta Pubbisetty Committed by Kalle Valo

wifi: ath11k: Add cold boot calibration support on WCN6750

Add cold boot calibration support on WCN6750. Unlike other
chipsets where firmware(FW)  is restarted after cold boot
calibration is completed, it is recommended not to restart
the firmware for WCN6750.

For WCN6750, FW sends both CAL_DONE & FW_READY QMI indication
to the driver after cold boot calibration is completed.

QMI message flow for WCN6750 with cold boot support:
FW_INIT_DONE to HOST -> CALIBRATION Mode to FW -> CAL_DONE to Host ->
FW_READY to Host -> MODE_ON to FW

QMI message flow for other chipsets with cold boot support:
FW_INIT_DONE to Host -> CALIBRATION Mode to FW -> FW_READY to Host ->
Trigger FW restart -> FW_INIT_DONE to HOST -> MODE_ON to FW

QMI message flow for chipsets without cold boot support:
FW_INIT_DONE to Host -> MODE_ON to FW

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: default avatarManikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: default avatarKalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220720134909.15626-3-quic_mpubbise@quicinc.com
parent b3ca3230
......@@ -406,7 +406,8 @@ static int ath11k_ahb_fwreset_from_cold_boot(struct ath11k_base *ab)
int timeout;
if (ath11k_cold_boot_cal == 0 || ab->qmi.cal_done ||
ab->hw_params.cold_boot_calib == 0)
ab->hw_params.cold_boot_calib == 0 ||
ab->hw_params.cbcal_restart_fw == 0)
return 0;
ath11k_dbg(ab, ATH11K_DBG_AHB, "wait for cold boot done\n");
......
......@@ -81,6 +81,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.idle_ps = false,
.supports_sta_ps = false,
.cold_boot_calib = true,
.cbcal_restart_fw = true,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
......@@ -152,6 +153,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.idle_ps = false,
.supports_sta_ps = false,
.cold_boot_calib = true,
.cbcal_restart_fw = true,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
......@@ -222,6 +224,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.cbcal_restart_fw = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
......@@ -292,6 +295,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.idle_ps = false,
.supports_sta_ps = false,
.cold_boot_calib = false,
.cbcal_restart_fw = false,
.fw_mem_mode = 2,
.num_vdevs = 8,
.num_peers = 128,
......@@ -362,6 +366,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.cbcal_restart_fw = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
......@@ -431,6 +436,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.cbcal_restart_fw = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
......@@ -499,7 +505,8 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.supports_shadow_regs = true,
.idle_ps = true,
.supports_sta_ps = true,
.cold_boot_calib = false,
.cold_boot_calib = true,
.cbcal_restart_fw = false,
.fw_mem_mode = 0,
.num_vdevs = 16 + 1,
.num_peers = 512,
......
......@@ -175,6 +175,7 @@ struct ath11k_hw_params {
bool idle_ps;
bool supports_sta_ps;
bool cold_boot_calib;
bool cbcal_restart_fw;
int fw_mem_mode;
u32 num_vdevs;
u32 num_peers;
......
......@@ -3014,8 +3014,10 @@ static void ath11k_qmi_msg_fw_ready_cb(struct qmi_handle *qmi_hdl,
ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi firmware ready\n");
if (!ab->qmi.cal_done) {
ab->qmi.cal_done = 1;
wake_up(&ab->qmi.cold_boot_waitq);
}
ath11k_qmi_driver_event_post(qmi, ATH11K_QMI_EVENT_FW_READY, NULL);
}
......@@ -3029,6 +3031,8 @@ static void ath11k_qmi_msg_cold_boot_cal_done_cb(struct qmi_handle *qmi_hdl,
struct ath11k_qmi, handle);
struct ath11k_base *ab = qmi->ab;
ab->qmi.cal_done = 1;
wake_up(&ab->qmi.cold_boot_waitq);
ath11k_dbg(ab, ATH11K_DBG_QMI, "qmi cold boot calibration done\n");
}
......@@ -3200,6 +3204,20 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work)
break;
case ATH11K_QMI_EVENT_FW_READY:
/* For targets requiring a FW restart upon cold
* boot completion, there is no need to process
* FW ready; such targets will receive FW init
* done message after FW restart.
*/
if (ab->hw_params.cbcal_restart_fw)
break;
clear_bit(ATH11K_FLAG_CRASH_FLUSH,
&ab->dev_flags);
clear_bit(ATH11K_FLAG_RECOVERY, &ab->dev_flags);
ath11k_core_qmi_firmware_ready(ab);
set_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags);
break;
case ATH11K_QMI_EVENT_COLD_BOOT_CAL_DONE:
break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment