net: dsa: realtek: convert to phylink_generic_validate()

Populate the supported interfaces and MAC capabilities for the Realtek
rtl8365 DSA switch and remove the old validate implementation to allow
DSA to use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/realtek/rtl8365mb.c

@@ -952,39 +952,17 @@ static bool rtl8365mb_phy_mode_supported(struct dsa_switch *ds, int port,
 	return false;
 }
 
-static void rtl8365mb_phylink_validate(struct dsa_switch *ds, int port,
-				       unsigned long *supported,
-				       struct phylink_link_state *state)
+static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port,
+				       struct phylink_config *config)
 {
-	struct realtek_priv *priv = ds->priv;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0 };
-
-	/* include/linux/phylink.h says:
-	 *     When @state->interface is %PHY_INTERFACE_MODE_NA, phylink
-	 *     expects the MAC driver to return all supported link modes.
-	 */
-	if (state->interface != PHY_INTERFACE_MODE_NA &&
-	    !rtl8365mb_phy_mode_supported(ds, port, state->interface)) {
-		dev_err(priv->dev, "phy mode %s is unsupported on port %d\n",
-			phy_modes(state->interface), port);
-		linkmode_zero(supported);
-		return;
-	}
-
-	phylink_set_port_modes(mask);
-
-	phylink_set(mask, Autoneg);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
-
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-	phylink_set(mask, 1000baseT_Full);
-
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
+	if (dsa_is_user_port(ds, port))
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+	else if (dsa_is_cpu_port(ds, port))
+		phy_interface_set_rgmii(config->supported_interfaces);
+
+	config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
+				   MAC_10 | MAC_100 | MAC_1000FD;
 }
 
 static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
@@ -2020,7 +1998,7 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
 	.get_tag_protocol = rtl8365mb_get_tag_protocol,
 	.setup = rtl8365mb_setup,
 	.teardown = rtl8365mb_teardown,
-	.phylink_validate = rtl8365mb_phylink_validate,
+	.phylink_get_caps = rtl8365mb_phylink_get_caps,
 	.phylink_mac_config = rtl8365mb_phylink_mac_config,
 	.phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
 	.phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
@@ -2038,7 +2016,7 @@ static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = {
 	.get_tag_protocol = rtl8365mb_get_tag_protocol,
 	.setup = rtl8365mb_setup,
 	.teardown = rtl8365mb_teardown,
-	.phylink_validate = rtl8365mb_phylink_validate,
+	.phylink_get_caps = rtl8365mb_phylink_get_caps,
 	.phylink_mac_config = rtl8365mb_phylink_mac_config,
 	.phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
 	.phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,