Commit 701f2eb6 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'mips_fixes_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Paul writes:
  "A few MIPS fixes for 4.19:

   - Avoid suboptimal placement of our VDSO when using the legacy mmap
     layout, which can prevent statically linked programs that were able
     to allocate large amounts of memory using the brk syscall prior to
     the introduction of our VDSO from functioning correctly.

   - Fix up CONFIG_CMDLINE handling for platforms which ought to ignore
     DT arguments but have incorrectly used them & lost other arguments
     since v3.16.

   - Fix a path in MAINTAINERS to use valid wildcards.

   - Fixup a regression from v4.17 in memset() for systems using
     CPU_DADDI_WORKAROUNDS."

* tag 'mips_fixes_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression
  MAINTAINERS: MIPS/LOONGSON2 ARCHITECTURE - Use the normal wildcard style
  MIPS: Fix CONFIG_CMDLINE handling
  MIPS: VDSO: Always map near top of user memory
parents 64c5e530 148b9aba
...@@ -9657,7 +9657,8 @@ MIPS/LOONGSON2 ARCHITECTURE ...@@ -9657,7 +9657,8 @@ MIPS/LOONGSON2 ARCHITECTURE
M: Jiaxun Yang <jiaxun.yang@flygoat.com> M: Jiaxun Yang <jiaxun.yang@flygoat.com>
L: linux-mips@linux-mips.org L: linux-mips@linux-mips.org
S: Maintained S: Maintained
F: arch/mips/loongson64/*{2e/2f}* F: arch/mips/loongson64/fuloong-2e/
F: arch/mips/loongson64/lemote-2f/
F: arch/mips/include/asm/mach-loongson64/ F: arch/mips/include/asm/mach-loongson64/
F: drivers/*/*loongson2* F: drivers/*/*loongson2*
F: drivers/*/*/*loongson2* F: drivers/*/*/*loongson2*
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <linux/atomic.h> #include <linux/atomic.h>
#include <linux/cpumask.h> #include <linux/cpumask.h>
#include <linux/sizes.h>
#include <linux/threads.h> #include <linux/threads.h>
#include <asm/cachectl.h> #include <asm/cachectl.h>
...@@ -80,11 +81,10 @@ extern unsigned int vced_count, vcei_count; ...@@ -80,11 +81,10 @@ extern unsigned int vced_count, vcei_count;
#endif #endif
/* #define VDSO_RANDOMIZE_SIZE (TASK_IS_32BIT_ADDR ? SZ_1M : SZ_256M)
* One page above the stack is used for branch delay slot "emulation".
* See dsemul.c for details. extern unsigned long mips_stack_top(void);
*/ #define STACK_TOP mips_stack_top()
#define STACK_TOP ((TASK_SIZE & PAGE_MASK) - PAGE_SIZE)
/* /*
* This decides where the kernel will search for a free chunk of vm * This decides where the kernel will search for a free chunk of vm
......
...@@ -32,6 +32,7 @@ ...@@ -32,6 +32,7 @@
#include <linux/nmi.h> #include <linux/nmi.h>
#include <linux/cpu.h> #include <linux/cpu.h>
#include <asm/abi.h>
#include <asm/asm.h> #include <asm/asm.h>
#include <asm/bootinfo.h> #include <asm/bootinfo.h>
#include <asm/cpu.h> #include <asm/cpu.h>
...@@ -39,6 +40,7 @@ ...@@ -39,6 +40,7 @@
#include <asm/dsp.h> #include <asm/dsp.h>
#include <asm/fpu.h> #include <asm/fpu.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mips-cps.h>
#include <asm/msa.h> #include <asm/msa.h>
#include <asm/pgtable.h> #include <asm/pgtable.h>
#include <asm/mipsregs.h> #include <asm/mipsregs.h>
...@@ -645,6 +647,29 @@ unsigned long get_wchan(struct task_struct *task) ...@@ -645,6 +647,29 @@ unsigned long get_wchan(struct task_struct *task)
return pc; return pc;
} }
unsigned long mips_stack_top(void)
{
unsigned long top = TASK_SIZE & PAGE_MASK;
/* One page for branch delay slot "emulation" */
top -= PAGE_SIZE;
/* Space for the VDSO, data page & GIC user page */
top -= PAGE_ALIGN(current->thread.abi->vdso->size);
top -= PAGE_SIZE;
top -= mips_gic_present() ? PAGE_SIZE : 0;
/* Space for cache colour alignment */
if (cpu_has_dc_aliases)
top -= shm_align_mask + 1;
/* Space to randomize the VDSO base */
if (current->flags & PF_RANDOMIZE)
top -= VDSO_RANDOMIZE_SIZE;
return top;
}
/* /*
* Don't forget that the stack pointer must be aligned on a 8 bytes * Don't forget that the stack pointer must be aligned on a 8 bytes
* boundary for 32-bits ABI and 16 bytes for 64-bits ABI. * boundary for 32-bits ABI and 16 bytes for 64-bits ABI.
......
...@@ -846,6 +846,34 @@ static void __init arch_mem_init(char **cmdline_p) ...@@ -846,6 +846,34 @@ static void __init arch_mem_init(char **cmdline_p)
struct memblock_region *reg; struct memblock_region *reg;
extern void plat_mem_setup(void); extern void plat_mem_setup(void);
/*
* Initialize boot_command_line to an innocuous but non-empty string in
* order to prevent early_init_dt_scan_chosen() from copying
* CONFIG_CMDLINE into it without our knowledge. We handle
* CONFIG_CMDLINE ourselves below & don't want to duplicate its
* content because repeating arguments can be problematic.
*/
strlcpy(boot_command_line, " ", COMMAND_LINE_SIZE);
/* call board setup routine */
plat_mem_setup();
/*
* Make sure all kernel memory is in the maps. The "UP" and
* "DOWN" are opposite for initdata since if it crosses over
* into another memory section you don't want that to be
* freed when the initdata is freed.
*/
arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
BOOT_MEM_RAM);
arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
BOOT_MEM_INIT_RAM);
pr_info("Determined physical RAM map:\n");
print_memory_map();
#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) #if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
#else #else
...@@ -873,26 +901,6 @@ static void __init arch_mem_init(char **cmdline_p) ...@@ -873,26 +901,6 @@ static void __init arch_mem_init(char **cmdline_p)
} }
#endif #endif
#endif #endif
/* call board setup routine */
plat_mem_setup();
/*
* Make sure all kernel memory is in the maps. The "UP" and
* "DOWN" are opposite for initdata since if it crosses over
* into another memory section you don't want that to be
* freed when the initdata is freed.
*/
arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
BOOT_MEM_RAM);
arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
BOOT_MEM_INIT_RAM);
pr_info("Determined physical RAM map:\n");
print_memory_map();
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line; *cmdline_p = command_line;
......
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/mm.h> #include <linux/mm.h>
#include <linux/random.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/timekeeper_internal.h> #include <linux/timekeeper_internal.h>
...@@ -97,6 +98,21 @@ void update_vsyscall_tz(void) ...@@ -97,6 +98,21 @@ void update_vsyscall_tz(void)
} }
} }
static unsigned long vdso_base(void)
{
unsigned long base;
/* Skip the delay slot emulation page */
base = STACK_TOP + PAGE_SIZE;
if (current->flags & PF_RANDOMIZE) {
base += get_random_int() & (VDSO_RANDOMIZE_SIZE - 1);
base = PAGE_ALIGN(base);
}
return base;
}
int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{ {
struct mips_vdso_image *image = current->thread.abi->vdso; struct mips_vdso_image *image = current->thread.abi->vdso;
...@@ -137,7 +153,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) ...@@ -137,7 +153,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
if (cpu_has_dc_aliases) if (cpu_has_dc_aliases)
size += shm_align_mask + 1; size += shm_align_mask + 1;
base = get_unmapped_area(NULL, 0, size, 0, 0); base = get_unmapped_area(NULL, vdso_base(), size, 0, 0);
if (IS_ERR_VALUE(base)) { if (IS_ERR_VALUE(base)) {
ret = base; ret = base;
goto out; goto out;
......
...@@ -280,9 +280,11 @@ ...@@ -280,9 +280,11 @@
* unset_bytes = end_addr - current_addr + 1 * unset_bytes = end_addr - current_addr + 1
* a2 = t1 - a0 + 1 * a2 = t1 - a0 + 1
*/ */
.set reorder
PTR_SUBU a2, t1, a0 PTR_SUBU a2, t1, a0
jr ra
PTR_ADDIU a2, 1 PTR_ADDIU a2, 1
jr ra
.set noreorder
.endm .endm
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment