Commit 705814b5 authored by Santosh Shilimkar's avatar Santosh Shilimkar Committed by Kevin Hilman

ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5

OMAP5 has backward compatible PRCM block and it's programming
model is mostly similar to OMAP4. Same is going to be maintained
for future OMAP4 based SOCs. Hence consolidate the OMAP4 power
management code so that it can be re-used on OMAP5 and later devices.

While at it, update the kernel-doc for omap4_pm_init().
Acked-by: default avatarNishanth Menon <nm@ti.com>
Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: default avatarKevin Hilman <khilman@linaro.org>
parent baf4b7d3
/*
* OMAP4 Power Management Routines
* OMAP4+ Power Management Routines
*
* Copyright (C) 2010-2011 Texas Instruments, Inc.
* Copyright (C) 2010-2013 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
......@@ -135,16 +135,16 @@ static void omap_default_idle(void)
}
/**
* omap4_pm_init - Init routine for OMAP4 PM
* omap4_init_static_deps - Add OMAP4 static dependencies
*
* Initializes all powerdomain and clockdomain target states
* and all PRCM settings.
* Add needed static clockdomain dependencies on OMAP4 devices.
* Return: 0 on success or 'err' on failures
*/
int __init omap4_pm_init(void)
static inline int omap4_init_static_deps(void)
{
int ret;
struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
struct clockdomain *ducati_clkdm, *l3_2_clkdm;
int ret = 0;
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
......@@ -163,7 +163,7 @@ int __init omap4_pm_init(void)
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains\n");
goto err2;
return ret;
}
/*
......@@ -171,6 +171,10 @@ int __init omap4_pm_init(void)
* MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
* expected. The hardware recommendation is to enable static
* dependencies for these to avoid system lock ups or random crashes.
* The L4 wakeup depedency is added to workaround the OCP sync hardware
* BUG with 32K synctimer which lead to incorrect timer value read
* from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
* are part of L4 wakeup clockdomain.
*/
mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
emif_clkdm = clkdm_lookup("l3_emif_clkdm");
......@@ -179,7 +183,7 @@ int __init omap4_pm_init(void)
ducati_clkdm = clkdm_lookup("ducati_clkdm");
if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
(!l3_2_clkdm) || (!ducati_clkdm))
goto err2;
return -EINVAL;
ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
......@@ -188,6 +192,39 @@ int __init omap4_pm_init(void)
ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
if (ret) {
pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
return -EINVAL;
}
return ret;
}
/**
* omap4_pm_init - Init routine for OMAP4+ devices
*
* Initializes all powerdomain and clockdomain target states
* and all PRCM settings.
* Return: Returns the error code returned by called functions.
*/
int __init omap4_pm_init(void)
{
int ret = 0;
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
return -ENODEV;
}
pr_info("Power Management for TI OMAP4+ devices.\n");
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains.\n");
goto err2;
}
if (cpu_is_omap44xx()) {
ret = omap4_init_static_deps();
if (ret)
goto err2;
}
......@@ -206,6 +243,7 @@ int __init omap4_pm_init(void)
/* Overwrite the default cpu_do_idle() */
arm_pm_idle = omap_default_idle;
if (cpu_is_omap44xx())
omap4_idle_init();
err2:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment