Commit 70a1c9e0 authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman

USB: remove dev->power.power_state

power.power_state is scheduled for removal.  This patch (as1053)
removes all uses of that field from drivers/usb.  Almost all of them
were write-only, the most significant exceptions being sl811-hcd.c and
u132-hcd.c.

Part of this patch was written by Pavel Machek.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: default avatarPavel Machek <pavel@ucw.cz>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent e1879b19
......@@ -794,8 +794,6 @@ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
done:
dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
udev->dev.power.power_state.event = msg.event;
return status;
}
......@@ -824,10 +822,8 @@ static int usb_resume_device(struct usb_device *udev)
done:
dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0) {
if (status == 0)
udev->autoresume_disabled = 0;
udev->dev.power.power_state.event = PM_EVENT_ON;
}
return status;
}
......@@ -1180,8 +1176,7 @@ static int usb_resume_both(struct usb_device *udev)
}
} else {
/* Needed for setting udev->dev.power.power_state.event,
* for possible debugging message, and for reset_resume. */
/* Needed for reset-resume */
status = usb_resume_device(udev);
}
......@@ -1194,6 +1189,7 @@ static int usb_resume_both(struct usb_device *udev)
done:
dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
if (!status)
udev->reset_resume = 0;
return status;
}
......
......@@ -73,7 +73,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (pci_enable_device(dev) < 0)
return -ENODEV;
dev->current_state = PCI_D0;
dev->dev.power.power_state = PMSG_ON;
if (!dev->irq) {
dev_err(&dev->dev,
......@@ -302,8 +301,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
done:
if (retval == 0) {
dev->dev.power.power_state = PMSG_SUSPEND;
#ifdef CONFIG_PPC_PMAC
/* Disable ASIC clocks for USB */
if (machine_is(powermac)) {
......@@ -406,8 +403,6 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
pci_set_master(dev);
pci_restore_state(dev);
dev->dev.power.power_state = PMSG_ON;
clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
if (hcd->driver->resume) {
......
......@@ -114,13 +114,11 @@ static inline int is_usb_device_driver(struct device_driver *drv)
static inline void mark_active(struct usb_interface *f)
{
f->is_active = 1;
f->dev.power.power_state.event = PM_EVENT_ON;
}
static inline void mark_quiesced(struct usb_interface *f)
{
f->is_active = 0;
f->dev.power.power_state.event = PM_EVENT_SUSPEND;
}
static inline int is_active(const struct usb_interface *f)
......
......@@ -900,7 +900,6 @@ static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state)
set_link_state (dum);
spin_unlock_irq (&dum->lock);
pdev->dev.power.power_state = state;
usb_hcd_poll_rh_status (dummy_to_hcd (dum));
return 0;
}
......@@ -915,7 +914,6 @@ static int dummy_udc_resume (struct platform_device *pdev)
set_link_state (dum);
spin_unlock_irq (&dum->lock);
pdev->dev.power.power_state = PMSG_ON;
usb_hcd_poll_rh_status (dummy_to_hcd (dum));
return 0;
}
......
......@@ -1265,8 +1265,6 @@ static int can_pullup(struct omap_udc *udc)
static void pullup_enable(struct omap_udc *udc)
{
udc->gadget.dev.parent->power.power_state = PMSG_ON;
udc->gadget.dev.power.power_state = PMSG_ON;
UDC_SYSCON1_REG |= UDC_PULLUP_EN;
if (!gadget_is_otg(&udc->gadget) && !cpu_is_omap15xx())
OTG_CTRL_REG |= OTG_BSESSVLD;
......@@ -3061,8 +3059,6 @@ static int omap_udc_suspend(struct platform_device *dev, pm_message_t message)
omap_pullup(&udc->gadget, 0);
}
udc->gadget.dev.power.power_state = PMSG_SUSPEND;
udc->gadget.dev.parent->power.power_state = PMSG_SUSPEND;
return 0;
}
......
......@@ -670,7 +670,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
spin_lock_irqsave (&ehci->lock, flags);
if (buf->bus->controller->power.power_state.event) {
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
size = scnprintf (next, size,
"bus %s, device %s (driver " DRIVER_VERSION ")\n"
"%s\n"
......
......@@ -125,7 +125,6 @@ static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
goto fail_irq;
}
dev->core.power.power_state = PMSG_ON;
dev->core.dma_mask = &dummy_mask; /* FIXME: for improper usb code */
hcd = usb_create_hcd(&ps3_ehci_hc_driver, &dev->core, dev->core.bus_id);
......
......@@ -1442,11 +1442,6 @@ static int isp116x_bus_resume(struct usb_hcd *hcd)
break;
case HCCONTROL_USB_OPER:
spin_unlock_irq(&isp116x->lock);
/* Without setting power_state here the
SUSPENDED state won't be removed from
sysfs/usbN/power.state as a response to remote
wakeup. Maybe in the future. */
hcd->self.root_hub->dev.power.power_state = PMSG_ON;
return 0;
default:
/* HCCONTROL_USB_RESET: this may happen, when during
......@@ -1460,7 +1455,6 @@ static int isp116x_bus_resume(struct usb_hcd *hcd)
if ((isp116x->rhdesca & RH_A_NDP) == 2)
isp116x_hub_control(hcd, SetPortFeature,
USB_PORT_FEAT_POWER, 2, NULL, 0);
hcd->self.root_hub->dev.power.power_state = PMSG_ON;
return 0;
}
......@@ -1486,8 +1480,6 @@ static int isp116x_bus_resume(struct usb_hcd *hcd)
isp116x_write_reg32(isp116x, HCCONTROL,
(val & ~HCCONTROL_HCFS) | HCCONTROL_USB_OPER);
spin_unlock_irq(&isp116x->lock);
/* see analogous comment above */
hcd->self.root_hub->dev.power.power_state = PMSG_ON;
hcd->state = HC_STATE_RUNNING;
return 0;
......@@ -1663,7 +1655,6 @@ static int __devinit isp116x_probe(struct platform_device *pdev)
static int isp116x_suspend(struct platform_device *dev, pm_message_t state)
{
VDBG("%s: state %x\n", __func__, state.event);
dev->dev.power.power_state = state;
return 0;
}
......@@ -1672,8 +1663,7 @@ static int isp116x_suspend(struct platform_device *dev, pm_message_t state)
*/
static int isp116x_resume(struct platform_device *dev)
{
VDBG("%s: state %x\n", __func__, dev->power.power_state.event);
dev->dev.power.power_state = PMSG_ON;
VDBG("%s\n", __func__);
return 0;
}
......
......@@ -655,7 +655,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
hcd->product_desc,
hcd_name);
if (bus->controller->power.power_state.event) {
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
size -= scnprintf (next, size,
"SUSPENDED (no register access)\n");
goto done;
......
......@@ -177,7 +177,6 @@ static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_
ep93xx_stop_hc(&pdev->dev);
hcd->state = HC_STATE_SUSPENDED;
pdev->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
......@@ -193,7 +192,6 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
ohci->next_statechange = jiffies;
ep93xx_start_hc(&pdev->dev);
pdev->dev.power.power_state = PMSG_ON;
usb_hcd_resume_root_hub(hcd);
return 0;
......
......@@ -505,7 +505,6 @@ static int ohci_omap_suspend(struct platform_device *dev, pm_message_t message)
omap_ohci_clock_power(0);
ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
dev->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
......@@ -518,7 +517,6 @@ static int ohci_omap_resume(struct platform_device *dev)
ohci->next_statechange = jiffies;
omap_ohci_clock_power(1);
dev->dev.power.power_state = PMSG_ON;
usb_hcd_resume_root_hub(platform_get_drvdata(dev));
return 0;
}
......
......@@ -127,7 +127,6 @@ static int ps3_ohci_probe(struct ps3_system_bus_device *dev)
goto fail_irq;
}
dev->core.power.power_state = PMSG_ON;
dev->core.dma_mask = &dummy_mask; /* FIXME: for improper usb code */
hcd = usb_create_hcd(&ps3_ohci_hc_driver, &dev->core, dev->core.bus_id);
......
......@@ -339,7 +339,6 @@ static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_
pxa27x_stop_hc(&pdev->dev);
hcd->state = HC_STATE_SUSPENDED;
pdev->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
......@@ -357,7 +356,6 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
if ((status = pxa27x_start_hc(&pdev->dev)) < 0)
return status;
pdev->dev.power.power_state = PMSG_ON;
usb_hcd_resume_root_hub(hcd);
return 0;
......
......@@ -224,7 +224,6 @@ static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
dev->power.power_state = PMSG_SUSPEND;
return 0;
}
......@@ -238,7 +237,6 @@ static int ohci_sm501_resume(struct platform_device *pdev)
ohci->next_statechange = jiffies;
sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
dev->power.power_state = PMSG_ON;
usb_hcd_resume_root_hub(platform_get_drvdata(pdev));
return 0;
}
......
......@@ -2107,13 +2107,11 @@ static struct hc_driver r8a66597_hc_driver = {
#if defined(CONFIG_PM)
static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state)
{
pdev->dev.power.power_state = state;
return 0;
}
static int r8a66597_resume(struct platform_device *pdev)
{
pdev->dev.power.power_state = PMSG_ON;
return 0;
}
#else /* if defined(CONFIG_PM) */
......
......@@ -94,12 +94,10 @@ static void port_power(struct sl811 *sl811, int is_on)
sl811->port1 = (1 << USB_PORT_FEAT_POWER);
sl811->irq_enable = SL11H_INTMASK_INSRMV;
hcd->self.controller->power.power_state = PMSG_ON;
} else {
sl811->port1 = 0;
sl811->irq_enable = 0;
hcd->state = HC_STATE_HALT;
hcd->self.controller->power.power_state = PMSG_SUSPEND;
}
sl811->ctrl1 = 0;
sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
......@@ -1772,8 +1770,6 @@ sl811h_suspend(struct platform_device *dev, pm_message_t state)
port_power(sl811, 0);
break;
}
if (retval == 0)
dev->dev.power.power_state = state;
return retval;
}
......@@ -1786,15 +1782,13 @@ sl811h_resume(struct platform_device *dev)
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
if (dev->dev.power.power_state.event == PM_EVENT_SUSPEND
|| !device_can_wakeup(&hcd->self.root_hub->dev)) {
if (!sl811->port1 || !device_can_wakeup(&hcd->self.root_hub->dev)) {
sl811->port1 = 0;
port_power(sl811, 1);
usb_root_hub_lost_power(hcd->self.root_hub);
return 0;
}
dev->dev.power.power_state = PMSG_ON;
return sl811h_bus_resume(hcd);
}
......
......@@ -1534,11 +1534,9 @@ static void u132_power(struct u132 *u132, int is_on)
if (u132->power)
return;
u132->power = 1;
hcd->self.controller->power.power_state = PMSG_ON;
} else {
u132->power = 0;
hcd->state = HC_STATE_HALT;
hcd->self.controller->power.power_state = PMSG_SUSPEND;
}
}
......@@ -3227,8 +3225,6 @@ static int u132_suspend(struct platform_device *pdev, pm_message_t state)
}
break;
}
if (retval == 0)
pdev->dev.power.power_state = state;
return retval;
}
}
......@@ -3246,14 +3242,13 @@ static int u132_resume(struct platform_device *pdev)
return -ESHUTDOWN;
} else {
int retval = 0;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
if (!u132->port[0].power) {
int ports = MAX_U132_PORTS;
while (ports-- > 0) {
port_power(u132, ports, 1);
}
retval = 0;
} else {
pdev->dev.power.power_state = PMSG_ON;
retval = u132_bus_resume(hcd);
}
return retval;
......
......@@ -1564,7 +1564,8 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf)
if (mutex_lock_interruptible(&dev->lock))
return -ERESTARTSYS;
if (intf->dev.power.power_state.event != PM_EVENT_ON) {
/* FIXME: What if a system sleep starts while a test is running? */
if (!intf->is_active) {
mutex_unlock(&dev->lock);
return -EHOSTUNREACH;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment