ice: fix pre-shifted bit usage

While converting to FIELD_PREP() and FIELD_GET(), it was noticed that
some of the RSS defines had *included* the shift in their definitions.
This is completely outside of normal, such that a developer could easily
make a mistake and shift at the usage site (like when using
FIELD_PREP()).

Rename the defines and set them to the "pre-shifted values" so they
match the template the driver normally uses for masks and the member
bits of the mask, which also allows the driver to use FIELD_PREP
correctly with these values. Use GENMASK() for this changed MASK value.

Do the same for the VLAN EMODE defines as well.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/ice/ice_adminq_cmd.h

@@ -422,10 +422,10 @@ struct ice_aqc_vsi_props {
 #define ICE_AQ_VSI_INNER_VLAN_INSERT_PVID	BIT(2)
 #define ICE_AQ_VSI_INNER_VLAN_EMODE_S		3
 #define ICE_AQ_VSI_INNER_VLAN_EMODE_M		(0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH	(0x0 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_UP	(0x1 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR		(0x2 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
-#define ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING	(0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH	0x0U
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_UP	0x1U
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR		0x2U
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING	0x3U
 	u8 inner_vlan_reserved2[3];
 	/* ingress egress up sections */
 	__le32 ingress_table; /* bitmap, 3 bits per up */
@@ -491,7 +491,7 @@ struct ice_aqc_vsi_props {
 #define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S		2
 #define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_M		(0xF << ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S)
 #define ICE_AQ_VSI_Q_OPT_RSS_HASH_S		6
-#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M		(0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M		GENMASK(7, 6)
 #define ICE_AQ_VSI_Q_OPT_RSS_HASH_TPLZ		0x0U
 #define ICE_AQ_VSI_Q_OPT_RSS_HASH_SYM_TPLZ	0x1U
 #define ICE_AQ_VSI_Q_OPT_RSS_HASH_XOR		0x2U

drivers/net/ethernet/intel/ice/ice_lib.c

@@ -984,7 +984,8 @@ static void ice_set_dflt_vsi_ctx(struct ice_hw *hw, struct ice_vsi_ctx *ctxt)
 	 */
 	if (ice_is_dvm_ena(hw)) {
 		ctxt->info.inner_vlan_flags |=
-			ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+			FIELD_PREP(ICE_AQ_VSI_INNER_VLAN_EMODE_M,
+				   ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING);
 		ctxt->info.outer_vlan_flags =
 			FIELD_PREP(ICE_AQ_VSI_OUTER_VLAN_TX_MODE_M,
 				   ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ALL);

drivers/net/ethernet/intel/ice/ice_vsi_vlan_lib.c

@@ -131,6 +131,7 @@ static int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
 {
 	struct ice_hw *hw = &vsi->back->hw;
 	struct ice_vsi_ctx *ctxt;
+	u8 *ivf;
 	int err;
 
 	/* do not allow modifying VLAN stripping when a port VLAN is configured
@@ -143,19 +144,24 @@ static int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
 	if (!ctxt)
 		return -ENOMEM;
 
+	ivf = &ctxt->info.inner_vlan_flags;
+
 	/* Here we are configuring what the VSI should do with the VLAN tag in
 	 * the Rx packet. We can either leave the tag in the packet or put it in
 	 * the Rx descriptor.
 	 */
-	if (ena)
+	if (ena) {
 		/* Strip VLAN tag from Rx packet and put it in the desc */
-		ctxt->info.inner_vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
-	else
+		*ivf = FIELD_PREP(ICE_AQ_VSI_INNER_VLAN_EMODE_M,
+				  ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH);
+	} else {
 		/* Disable stripping. Leave tag in packet */
-		ctxt->info.inner_vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+		*ivf = FIELD_PREP(ICE_AQ_VSI_INNER_VLAN_EMODE_M,
+				  ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING);
+	}
 
 	/* Allow all packets untagged/tagged */
-	ctxt->info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
+	*ivf |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
 
 	ctxt->info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID);