[media] lmedm04: correct I2C values to 7 bit addressing

The separation the lmedm04 fails on the ts2020 portion because the correct
I2C addressing.
So, it's time to correct the addressing in the remainder of lmedm04.
Tested all tuners.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/usb/dvb-usb-v2/lmedm04.c

@@ -627,8 +627,8 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 		gate = 5;
 
 	for (i = 0; i < num; i++) {
-		read_o = 1 & (msg[i].flags & I2C_M_RD);
-		read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+		read_o = msg[i].flags & I2C_M_RD;
+		read = i + 1 < num && msg[i + 1].flags & I2C_M_RD;
 		read |= read_o;
 		gate = (msg[i].addr == st->i2c_tuner_addr)
 			? (read)	? st->i2c_tuner_gate_r
@@ -641,7 +641,8 @@ static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 		else
 			obuf[1] = msg[i].len + read + 1;
 
-		obuf[2] = msg[i].addr;
+		obuf[2] = msg[i].addr << 1;
+
 		if (read) {
 			if (read_o)
 				len = 3;
@@ -895,27 +896,27 @@ static int lme2510_kill_urb(struct usb_data_stream *stream)
 }
 
 static struct tda10086_config tda10086_config = {
-	.demod_address = 0x1c,
+	.demod_address = 0x0e,
 	.invert = 0,
 	.diseqc_tone = 1,
 	.xtal_freq = TDA10086_XTAL_16M,
 };
 
 static struct stv0288_config lme_config = {
-	.demod_address = 0xd0,
+	.demod_address = 0x68,
 	.min_delay_ms = 15,
 	.inittab = s7395_inittab,
 };
 
 static struct ix2505v_config lme_tuner = {
-	.tuner_address = 0xc0,
+	.tuner_address = 0x60,
 	.min_delay_ms = 100,
 	.tuner_gain = 0x0,
 	.tuner_chargepump = 0x3,
 };
 
 static struct stv0299_config sharp_z0194_config = {
-	.demod_address = 0xd0,
+	.demod_address = 0x68,
 	.inittab = sharp_z0194a_inittab,
 	.mclk = 88000000UL,
 	.invert = 0,
@@ -944,7 +945,7 @@ static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe,
 }
 
 static struct m88rs2000_config m88rs2000_config = {
-	.demod_addr = 0xd0,
+	.demod_addr = 0x68,
 	.set_ts_params = dm04_rs2000_set_ts_param,
 };
 
@@ -1054,7 +1055,7 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 			info("TUN Found Frontend TDA10086");
 			st->i2c_tuner_gate_w = 4;
 			st->i2c_tuner_gate_r = 4;
-			st->i2c_tuner_addr = 0xc0;
+			st->i2c_tuner_addr = 0x60;
 			st->tuner_config = TUNER_LG;
 			if (st->dvb_usb_lme2510_firmware != TUNER_LG) {
 				st->dvb_usb_lme2510_firmware = TUNER_LG;
@@ -1070,7 +1071,7 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 			info("FE Found Stv0299");
 			st->i2c_tuner_gate_w = 4;
 			st->i2c_tuner_gate_r = 5;
-			st->i2c_tuner_addr = 0xc0;
+			st->i2c_tuner_addr = 0x60;
 			st->tuner_config = TUNER_S0194;
 			if (st->dvb_usb_lme2510_firmware != TUNER_S0194) {
 				st->dvb_usb_lme2510_firmware = TUNER_S0194;
@@ -1087,7 +1088,7 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 			info("FE Found Stv0288");
 			st->i2c_tuner_gate_w = 4;
 			st->i2c_tuner_gate_r = 5;
-			st->i2c_tuner_addr = 0xc0;
+			st->i2c_tuner_addr = 0x60;
 			st->tuner_config = TUNER_S7395;
 			if (st->dvb_usb_lme2510_firmware != TUNER_S7395) {
 				st->dvb_usb_lme2510_firmware = TUNER_S7395;
@@ -1106,7 +1107,7 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 					&d->i2c_adap);
 			st->i2c_tuner_gate_w = 5;
 			st->i2c_tuner_gate_r = 5;
-			st->i2c_tuner_addr = 0xc0;
+			st->i2c_tuner_addr = 0x60;
 			st->tuner_config = TUNER_RS2000;
 			st->fe_set_voltage =
 				adap->fe[0]->ops.set_voltage;
@@ -1151,7 +1152,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
 
 	switch (st->tuner_config) {
 	case TUNER_LG:
-		if (dvb_attach(tda826x_attach, adap->fe[0], 0xc0,
+		if (dvb_attach(tda826x_attach, adap->fe[0], 0x60,
 			&d->i2c_adap, 1))
 			ret = st->tuner_config;
 		break;
@@ -1161,7 +1162,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
 			ret = st->tuner_config;
 		break;
 	case TUNER_S0194:
-		if (dvb_attach(dvb_pll_attach , adap->fe[0], 0xc0,
+		if (dvb_attach(dvb_pll_attach , adap->fe[0], 0x60,
 			&d->i2c_adap, DVB_PLL_OPERA1))
 			ret = st->tuner_config;
 		break;