Skip to content

L
linux
Commit 72345923 authored by Roland Vossen's avatar Roland Vossen Committed by Greg Kroah-Hartman
Browse files
Options

staging: brcm80211: removal of inactive d11 code 

Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.
Signed-off-by: default avatarRoland Vossen <rvossen@broadcom.com>
Reviewed-by: default avatarArend van Spriel <arend@broadcom.com>
Reviewed-by: default avatarBrett Rudley <brudley@broadcom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent aba0586c
Hide whitespace changes
Inline Side-by-side
Showing with 54 additions and 266 deletions
drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
View file @ 72345923
......@@ -254,9 +254,6 @@ static u32 WLBANDINITFN(wlc_setband_inact) (struct wlc_info *wlc, uint bandunit)
ASSERT(wlc_hw->clk);
if (D11REV_LT(wlc_hw->corerev, 17))
tmp = R_REG(wlc_hw->osh, &wlc_hw->regs->maccontrol);
wlc_bmac_core_phy_clk(wlc_hw, OFF);
wlc_setxband(wlc_hw, bandunit);
......@@ -467,9 +464,6 @@ void wlc_bmac_watchdog(void *arg)
/* make sure RX dma has buffers */
dma_rxfill(wlc->hw->di[RX_FIFO]);
if (D11REV_IS(wlc_hw->corerev, 4)) {
dma_rxfill(wlc->hw->di[RX_TXSTATUS_FIFO]);
}
wlc_phy_watchdog(wlc_hw->band->pi);
}
......@@ -606,23 +600,11 @@ static bool wlc_bmac_attach_dmapio(struct wlc_info *wlc, uint j, bool wme)
*/
ASSERT(TX_AC_VO_FIFO == 3);
ASSERT(TX_CTL_FIFO == 3);
if (D11REV_IS(wlc_hw->corerev, 4)) {
ASSERT(RX_TXSTATUS_FIFO == 3);
wlc_hw->di[3] = dma_attach(osh, name, wlc_hw->sih,
DMAREG(wlc_hw, DMA_TX, 3),
DMAREG(wlc_hw, DMA_RX, 3),
tune->ntxd, tune->nrxd,
sizeof(tx_status_t), -1,
tune->nrxbufpost, 0,
&wl_msg_level);
dma_attach_err |= (NULL == wlc_hw->di[3]);
} else {
wlc_hw->di[3] = dma_attach(osh, name, wlc_hw->sih,
DMAREG(wlc_hw, DMA_TX, 3),
NULL, tune->ntxd, 0, 0, -1,
0, 0, &wl_msg_level);
dma_attach_err |= (NULL == wlc_hw->di[3]);
}
wlc_hw->di[3] = dma_attach(osh, name, wlc_hw->sih,
DMAREG(wlc_hw, DMA_TX, 3),
NULL, tune->ntxd, 0, 0, -1,
0, 0, &wl_msg_level);
dma_attach_err |= (NULL == wlc_hw->di[3]);
/* Cleaner to leave this as if with AP defined */
if (dma_attach_err) {
......@@ -792,8 +774,7 @@ int wlc_bmac_attach(struct wlc_info *wlc, u16 vendor, u16 device, uint unit,
wlc_hw->boardflags = (u32) getintvar(vars, "boardflags");
wlc_hw->boardflags2 = (u32) getintvar(vars, "boardflags2");
if (D11REV_LE(wlc_hw->corerev, 4)
|| (wlc_hw->boardflags & BFL_NOPLLDOWN))
if (wlc_hw->boardflags & BFL_NOPLLDOWN)
wlc_bmac_pllreq(wlc_hw, true, WLC_PLLREQ_SHARED);
if ((wlc_hw->sih->bustype == PCI_BUS)
......@@ -879,10 +860,8 @@ int wlc_bmac_attach(struct wlc_info *wlc, u16 vendor, u16 device, uint unit,
wlc->band->bandtype = j ? WLC_BAND_5G : WLC_BAND_2G;
wlc->core->coreidx = si_coreidx(wlc_hw->sih);
if (D11REV_GE(wlc_hw->corerev, 13)) {
wlc_hw->machwcap = R_REG(wlc_hw->osh, &regs->machwcap);
wlc_hw->machwcap_backup = wlc_hw->machwcap;
}
wlc_hw->machwcap = R_REG(wlc_hw->osh, &regs->machwcap);
wlc_hw->machwcap_backup = wlc_hw->machwcap;
/* init tx fifo size */
ASSERT((wlc_hw->corerev - XMTFIFOTBL_STARTREV) <
......@@ -1288,16 +1267,12 @@ int wlc_bmac_down_finish(struct wlc_hw_info *wlc_hw)
void wlc_bmac_wait_for_wake(struct wlc_hw_info *wlc_hw)
{
if (D11REV_IS(wlc_hw->corerev, 4)) /* no slowclock */
udelay(5);
else {
/* delay before first read of ucode state */
udelay(40);
/* delay before first read of ucode state */
udelay(40);
/* wait until ucode is no longer asleep */
SPINWAIT((wlc_bmac_read_shm(wlc_hw, M_UCODE_DBGST) ==
DBGST_ASLEEP), wlc_hw->wlc->fastpwrup_dly);
}
/* wait until ucode is no longer asleep */
SPINWAIT((wlc_bmac_read_shm(wlc_hw, M_UCODE_DBGST) ==
DBGST_ASLEEP), wlc_hw->wlc->fastpwrup_dly);
ASSERT(wlc_bmac_read_shm(wlc_hw, M_UCODE_DBGST) != DBGST_ASLEEP);
}
......@@ -1362,7 +1337,7 @@ static void wlc_clkctl_clk(struct wlc_hw_info *wlc_hw, uint mode)
* then use FCA to verify mac is running fast clock
*/
wakeup_ucode = D11REV_LT(wlc_hw->corerev, 9);
wakeup_ucode = false;
if (wlc_hw->up && wakeup_ucode)
wlc_ucode_wake_override_set(wlc_hw,
......@@ -1370,19 +1345,8 @@ static void wlc_clkctl_clk(struct wlc_hw_info *wlc_hw, uint mode)
wlc_hw->forcefastclk = si_clkctl_cc(wlc_hw->sih, mode);
if (D11REV_LT(wlc_hw->corerev, 11)) {
/* ucode WAR for old chips */
if (wlc_hw->forcefastclk)
wlc_bmac_mhf(wlc_hw, MHF1, MHF1_FORCEFASTCLK,
MHF1_FORCEFASTCLK, WLC_BAND_ALL);
else
wlc_bmac_mhf(wlc_hw, MHF1, MHF1_FORCEFASTCLK, 0,
WLC_BAND_ALL);
}
/* check fast clock is available (if core is not in reset) */
if (D11REV_GT(wlc_hw->corerev, 4) && wlc_hw->forcefastclk
&& wlc_hw->clk)
if (wlc_hw->forcefastclk && wlc_hw->clk)
ASSERT(si_core_sflags(wlc_hw->sih, 0, 0) & SISF_FCLKA);
/* keep the ucode wake bit on if forcefastclk is on
......@@ -1803,8 +1767,6 @@ void wlc_bmac_bw_set(struct wlc_hw_info *wlc_hw, u16 bw)
wlc_phy_bw_state_set(wlc_hw->band->pi, bw);
ASSERT(wlc_hw->clk);
if (D11REV_LT(wlc_hw->corerev, 17))
tmp = R_REG(wlc_hw->osh, &wlc_hw->regs->maccontrol);
wlc_bmac_phy_reset(wlc_hw);
wlc_phy_init(wlc_hw->band->pi, wlc_phy_chanspec_get(wlc_hw->band->pi));
......@@ -2170,15 +2132,11 @@ bool wlc_bmac_radio_read_hwdisabled(struct wlc_hw_info *wlc_hw)
/* may need to take core out of reset first */
clk = wlc_hw->clk;
if (!clk) {
if (D11REV_LE(wlc_hw->corerev, 11))
resetbits |= SICF_PCLKE;
/*
* corerev >= 18, mac no longer enables phyclk automatically when driver accesses
* phyreg throughput mac. This can be skipped since only mac reg is accessed below
*/
if (D11REV_GE(wlc_hw->corerev, 18))
flags |= SICF_PCLKE;
flags |= SICF_PCLKE;
/* AI chip doesn't restore bar0win2 on hibernation/resume, need sw fixup */
if ((wlc_hw->sih->chip == BCM43224_CHIP_ID) ||
......@@ -2249,26 +2207,6 @@ void wlc_bmac_hw_up(struct wlc_hw_info *wlc_hw)
static bool wlc_dma_rxreset(struct wlc_hw_info *wlc_hw, uint fifo)
{
struct hnddma_pub *di = wlc_hw->di[fifo];
struct osl_info *osh;
if (D11REV_LT(wlc_hw->corerev, 12)) {
bool rxidle = true;
u16 rcv_frm_cnt = 0;
osh = wlc_hw->osh;
W_REG(osh, &wlc_hw->regs->rcv_fifo_ctl, fifo << 8);
SPINWAIT((!(rxidle = dma_rxidle(di))) &&
((rcv_frm_cnt =
R_REG(osh, &wlc_hw->regs->rcv_frm_cnt)) != 0),
50000);
if (!rxidle && (rcv_frm_cnt != 0))
WL_ERROR("wl%d: %s: rxdma[%d] not idle && rcv_frm_cnt(%d) not zero\n",
wlc_hw->unit, __func__, fifo, rcv_frm_cnt);
mdelay(2);
}
return dma_rxreset(di);
}
......@@ -2312,12 +2250,6 @@ void wlc_bmac_corereset(struct wlc_hw_info *wlc_hw, u32 flags)
WL_ERROR("wl%d: %s: dma_rxreset[%d]: cannot stop dma\n",
wlc_hw->unit, __func__, RX_FIFO);
}
if (D11REV_IS(wlc_hw->corerev, 4)
&& wlc_hw->di[RX_TXSTATUS_FIFO]
&& (!wlc_dma_rxreset(wlc_hw, RX_TXSTATUS_FIFO))) {
WL_ERROR("wl%d: %s: dma_rxreset[%d]: cannot stop dma\n",
wlc_hw->unit, __func__, RX_TXSTATUS_FIFO);
}
}
/* if noreset, just stop the psm and return */
if (wlc_hw->noreset) {
......@@ -2326,16 +2258,12 @@ void wlc_bmac_corereset(struct wlc_hw_info *wlc_hw, u32 flags)
return;
}
if (D11REV_LE(wlc_hw->corerev, 11))
resetbits |= SICF_PCLKE;
/*
* corerev >= 18, mac no longer enables phyclk automatically when driver accesses phyreg
* throughput mac, AND phy_reset is skipped at early stage when band->pi is invalid
* need to enable PHY CLK
* mac no longer enables phyclk automatically when driver accesses
* phyreg throughput mac, AND phy_reset is skipped at early stage when
* band->pi is invalid. need to enable PHY CLK
*/
if (D11REV_GE(wlc_hw->corerev, 18))
flags |= SICF_PCLKE;
flags |= SICF_PCLKE;
/* reset the core
* In chips with PMU, the fastclk request goes through d11 core reg 0x1e0, which
......@@ -2381,9 +2309,6 @@ static void wlc_corerev_fifofixup(struct wlc_hw_info *wlc_hw)
u16 txfifo_cmd;
struct osl_info *osh;
if (D11REV_LT(wlc_hw->corerev, 9))
goto exit;
/* tx fifos start at TXFIFO_START_BLK from the Base address */
txfifo_startblk = TXFIFO_START_BLK;
......@@ -2403,8 +2328,7 @@ static void wlc_corerev_fifofixup(struct wlc_hw_info *wlc_hw)
W_REG(osh, &regs->xmtfifocmd, txfifo_cmd);
W_REG(osh, &regs->xmtfifodef, txfifo_def);
if (D11REV_GE(wlc_hw->corerev, 16))
W_REG(osh, &regs->xmtfifodef1, txfifo_def1);
W_REG(osh, &regs->xmtfifodef1, txfifo_def1);
W_REG(osh, &regs->xmtfifocmd, txfifo_cmd);
......@@ -2454,12 +2378,9 @@ static void wlc_coreinit(struct wlc_info *wlc)
wlc_ucode_download(wlc_hw);
/*
* FIFOSZ fixup
* 1) core5-9 use ucode 5 to save space since the PSM is the same
* 2) newer chips, driver wants to controls the fifo allocation
* FIFOSZ fixup. driver wants to controls the fifo allocation.
*/
if (D11REV_GE(wlc_hw->corerev, 4))
fifosz_fixup = true;
fifosz_fixup = true;
/* let the PSM run to the suspended state, set mode to BSS STA */
W_REG(osh, &regs->macintstatus, -1);
......@@ -2536,12 +2457,7 @@ static void wlc_coreinit(struct wlc_info *wlc)
if (err != 0) {
WL_ERROR("wlc_coreinit: txfifo mismatch: ucode size %d driver size %d index %d\n",
buf[i], wlc_hw->xmtfifo_sz[i], i);
/* DO NOT ASSERT corerev < 4 even there is a mismatch
* shmem, since driver don't overwrite those chip and
* ucode initialize data will be used.
*/
if (D11REV_GE(wlc_hw->corerev, 4))
ASSERT(0);
ASSERT(0);
}
/* make sure we can still talk to the mac */
......@@ -2555,8 +2471,6 @@ static void wlc_coreinit(struct wlc_info *wlc)
/* enable one rx interrupt per received frame */
W_REG(osh, &regs->intrcvlazy[0], (1 << IRL_FC_SHIFT));
if (D11REV_IS(wlc_hw->corerev, 4))
W_REG(osh, &regs->intrcvlazy[3], (1 << IRL_FC_SHIFT));
/* set the station mode (BSS STA) */
wlc_bmac_mctrl(wlc_hw,
......@@ -2571,30 +2485,23 @@ static void wlc_coreinit(struct wlc_info *wlc)
/* write interrupt mask */
W_REG(osh, &regs->intctrlregs[RX_FIFO].intmask, DEF_RXINTMASK);
if (D11REV_IS(wlc_hw->corerev, 4))
W_REG(osh, &regs->intctrlregs[RX_TXSTATUS_FIFO].intmask,
DEF_RXINTMASK);
/* allow the MAC to control the PHY clock (dynamic on/off) */
wlc_bmac_macphyclk_set(wlc_hw, ON);
/* program dynamic clock control fast powerup delay register */
if (D11REV_GT(wlc_hw->corerev, 4)) {
wlc->fastpwrup_dly = si_clkctl_fast_pwrup_delay(wlc_hw->sih);
W_REG(osh, &regs->scc_fastpwrup_dly, wlc->fastpwrup_dly);
}
wlc->fastpwrup_dly = si_clkctl_fast_pwrup_delay(wlc_hw->sih);
W_REG(osh, &regs->scc_fastpwrup_dly, wlc->fastpwrup_dly);
/* tell the ucode the corerev */
wlc_bmac_write_shm(wlc_hw, M_MACHW_VER, (u16) wlc_hw->corerev);
/* tell the ucode MAC capabilities */
if (D11REV_GE(wlc_hw->corerev, 13)) {
wlc_bmac_write_shm(wlc_hw, M_MACHW_CAP_L,
(u16) (wlc_hw->machwcap & 0xffff));
wlc_bmac_write_shm(wlc_hw, M_MACHW_CAP_H,
(u16) ((wlc_hw->
machwcap >> 16) & 0xffff));
}
wlc_bmac_write_shm(wlc_hw, M_MACHW_CAP_L,
(u16) (wlc_hw->machwcap & 0xffff));
wlc_bmac_write_shm(wlc_hw, M_MACHW_CAP_H,
(u16) ((wlc_hw->
machwcap >> 16) & 0xffff));
/* write retry limits to SCR, this done after PSM init */
W_REG(osh, &regs->objaddr, OBJADDR_SCR_SEL | S_DOT11_SRC_LMT);
......@@ -2608,10 +2515,8 @@ static void wlc_coreinit(struct wlc_info *wlc)
wlc_bmac_write_shm(wlc_hw, M_SFRMTXCNTFBRTHSD, wlc_hw->SFBL);
wlc_bmac_write_shm(wlc_hw, M_LFRMTXCNTFBRTHSD, wlc_hw->LFBL);
if (D11REV_GE(wlc_hw->corerev, 16)) {
AND_REG(osh, &regs->ifs_ctl, 0x0FFF);
W_REG(osh, &regs->ifs_aifsn, EDCF_AIFSN_MIN);
}
AND_REG(osh, &regs->ifs_ctl, 0x0FFF);
W_REG(osh, &regs->ifs_aifsn, EDCF_AIFSN_MIN);
/* dma initializations */
wlc->txpend16165war = 0;
......@@ -2625,10 +2530,6 @@ static void wlc_coreinit(struct wlc_info *wlc)
/* init the rx dma engine(s) and post receive buffers */
dma_rxinit(wlc_hw->di[RX_FIFO]);
dma_rxfill(wlc_hw->di[RX_FIFO]);
if (D11REV_IS(wlc_hw->corerev, 4)) {
dma_rxinit(wlc_hw->di[RX_TXSTATUS_FIFO]);
dma_rxfill(wlc_hw->di[RX_TXSTATUS_FIFO]);
}
}
/* This function is used for changing the tsf frac register
......@@ -3160,45 +3061,12 @@ static inline u32 wlc_intstatus(struct wlc_info *wlc, bool in_isr)
/* MI_DMAINT is indication of non-zero intstatus */
if (macintstatus & MI_DMAINT) {
if (D11REV_IS(wlc_hw->corerev, 4)) {
intstatus_rxfifo =
R_REG(osh, &regs->intctrlregs[RX_FIFO].intstatus);
intstatus_txsfifo =
R_REG(osh,
&regs->intctrlregs[RX_TXSTATUS_FIFO].
intstatus);
WL_TRACE("wl%d: intstatus_rxfifo 0x%x, intstatus_txsfifo 0x%x\n",
wlc_hw->unit,
intstatus_rxfifo, intstatus_txsfifo);
/* defer unsolicited interrupt hints */
intstatus_rxfifo &= DEF_RXINTMASK;
intstatus_txsfifo &= DEF_RXINTMASK;
/* MI_DMAINT bit in macintstatus is indication of RX_FIFO interrupt */
/* clear interrupt hints */
if (intstatus_rxfifo)
W_REG(osh,
&regs->intctrlregs[RX_FIFO].intstatus,
intstatus_rxfifo);
else
macintstatus &= ~MI_DMAINT;
/* MI_TFS bit in macintstatus is encoding of RX_TXSTATUS_FIFO interrupt */
if (intstatus_txsfifo) {
W_REG(osh,
&regs->intctrlregs[RX_TXSTATUS_FIFO].
intstatus, intstatus_txsfifo);
macintstatus |= MI_TFS;
}
} else {
/*
* For corerevs >= 5, only fifo interrupt enabled is I_RI in RX_FIFO.
* If MI_DMAINT is set, assume it is set and clear the interrupt.
*/
W_REG(osh, &regs->intctrlregs[RX_FIFO].intstatus,
DEF_RXINTMASK);
}
/*
* only fifo interrupt enabled is I_RI in RX_FIFO. If
* MI_DMAINT is set, assume it is set and clear the interrupt.
*/
W_REG(osh, &regs->intctrlregs[RX_FIFO].intstatus,
DEF_RXINTMASK);
}
return macintstatus;
......@@ -3324,14 +3192,7 @@ wlc_bmac_txstatus(struct wlc_hw_info *wlc_hw, bool bound, bool *fatal)
WL_TRACE("wl%d: wlc_bmac_txstatus\n", wlc_hw->unit);
if (D11REV_IS(wlc_hw->corerev, 4)) {
/* to retire soon */
*fatal = wlc_bmac_txstatus_corerev4(wlc->hw);
if (*fatal)
return 0;
} else {
/* corerev >= 5 */
{
d11regs_t *regs;
struct osl_info *osh;
tx_status_t txstatus, *txs;
......@@ -3624,41 +3485,6 @@ bool wlc_bmac_validate_chip_access(struct wlc_hw_info *wlc_hw)
(void)R_REG(osh, &regs->objaddr);
W_REG(osh, &regs->objdata, w);
if (D11REV_LT(wlc_hw->corerev, 11)) {
/* if 32 bit writes are split into 16 bit writes, are they in the correct order
* for our interface, low to high
*/
reg16 = (volatile u16 *)&regs->tsf_cfpstart;
/* write the CFPStart register low half explicitly, starting a buffered write */
W_REG(osh, reg16, 0xAAAA);
/* Write a 32 bit value to CFPStart to test the 16 bit split order.
* If the low 16 bits are written first, followed by the high 16 bits then the
* 32 bit value 0xCCCCBBBB should end up in the register.
* If the order is reversed, then the write to the high half will trigger a buffered
* write of 0xCCCCAAAA.
* If the bus is 32 bits, then this is not much of a test, and the reg should
* have the correct value 0xCCCCBBBB.
*/
W_REG(osh, &regs->tsf_cfpstart, 0xCCCCBBBB);
/* verify with the 16 bit registers that have no side effects */
val = R_REG(osh, &regs->tsf_cfpstrt_l);
if (val != (uint) 0xBBBB) {
WL_ERROR("wl%d: validate_chip_access: tsf_cfpstrt_l = 0x%x, expected 0x%x\n",
wlc_hw->unit, val, 0xBBBB);
return false;
}
val = R_REG(osh, &regs->tsf_cfpstrt_h);
if (val != (uint) 0xCCCC) {
WL_ERROR("wl%d: validate_chip_access: tsf_cfpstrt_h = 0x%x, expected 0x%x\n",
wlc_hw->unit, val, 0xCCCC);
return false;
}
}
/* clear CFPStart */
W_REG(osh, &regs->tsf_cfpstart, 0);
......@@ -3689,9 +3515,6 @@ void wlc_bmac_core_phypll_ctl(struct wlc_hw_info *wlc_hw, bool on)
regs = wlc_hw->regs;
osh = wlc_hw->osh;
if (D11REV_LE(wlc_hw->corerev, 16) || D11REV_IS(wlc_hw->corerev, 20))
return;
if (on) {
if ((wlc_hw->sih->chip == BCM4313_CHIP_ID)) {
OR_REG(osh, &regs->clk_ctl_st,
......@@ -3813,8 +3636,6 @@ static void wlc_flushqueues(struct wlc_info *wlc)
/* free any posted rx packets */
dma_rxreclaim(wlc_hw->di[RX_FIFO]);
if (D11REV_IS(wlc_hw->corerev, 4))
dma_rxreclaim(wlc_hw->di[RX_TXSTATUS_FIFO]);
}
u16 wlc_bmac_read_shm(struct wlc_hw_info *wlc_hw, uint offset)
......
drivers/staging/brcm80211/brcmsmac/wlc_key.h
View file @ 72345923
......@@ -45,11 +45,10 @@ struct wlc_bsscfg;
#define WLC_MAX_WSEC_HW_KEYS(wlc) WSEC_MAX_RCMTA_KEYS
/* Max # of hardware TKIP MIC keys supported */
#define WLC_MAX_TKMIC_HW_KEYS(wlc) ((D11REV_GE((wlc)->pub->corerev, 13)) ? \
WSEC_MAX_TKMIC_ENGINE_KEYS : 0)
#define WLC_MAX_TKMIC_HW_KEYS(wlc) (WSEC_MAX_TKMIC_ENGINE_KEYS)
#define WSEC_HW_TKMIC_KEY(wlc, key, bsscfg) \
(((D11REV_GE((wlc)->pub->corerev, 13)) && ((wlc)->machwcap & MCAP_TKIPMIC)) && \
((((wlc)->machwcap & MCAP_TKIPMIC)) && \
(key) && ((key)->algo == CRYPTO_ALGO_TKIP) && \
!WSEC_SOFTKEY(wlc, key, bsscfg) && \
WSEC_KEY_INDEX(wlc, key) >= WLC_DEFAULT_KEYS && \
......
drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c
View file @ 72345923
......@@ -457,7 +457,7 @@ void wlc_init(struct wlc_info *wlc)
wlc_bmac_init(wlc->hw, chanspec, mute);
wlc->seckeys = wlc_bmac_read_shm(wlc->hw, M_SECRXKEYS_PTR) * 2;
if (D11REV_GE(wlc->pub->corerev, 15) && (wlc->machwcap & MCAP_TKIPMIC))
if (wlc->machwcap & MCAP_TKIPMIC)
wlc->tkmickeys =
wlc_bmac_read_shm(wlc->hw, M_TKMICKEYS_PTR) * 2;
......@@ -547,8 +547,7 @@ void wlc_init(struct wlc_info *wlc)
wlc->tx_suspended = false;
/* enable the RF Disable Delay timer */
if (D11REV_GE(wlc->pub->corerev, 10))
W_REG(wlc->osh, &wlc->regs->rfdisabledly, RFDISABLE_DEFAULT);
W_REG(wlc->osh, &wlc->regs->rfdisabledly, RFDISABLE_DEFAULT);
/* initialize mpc delay */
wlc->mpc_delay_off = wlc->mpc_dlycnt = WLC_MPC_MIN_DELAYCNT;
......@@ -3486,15 +3485,8 @@ _wlc_ioctl(struct wlc_info *wlc, int cmd, void *arg, int len,
break;
}
/* 4322 supports antdiv in phy, no need to set it to ucode */
if (WLCISNPHY(wlc->band)
&& D11REV_IS(wlc->pub->corerev, 16)) {
WL_ERROR("wl%d: can't set ucantdiv for 4322\n",
wlc->pub->unit);
bcmerror = BCME_UNSUPPORTED;
} else
wlc_mhf(wlc, MHF1, MHF1_ANTDIV,
(val ? MHF1_ANTDIV : 0), WLC_BAND_AUTO);
wlc_mhf(wlc, MHF1, MHF1_ANTDIV,
(val ? MHF1_ANTDIV : 0), WLC_BAND_AUTO);
break;
}
#endif /* defined(BCMDBG) */
......@@ -6162,16 +6154,13 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
*/
txh->TxStatus = htol16(status);
if (D11REV_GE(wlc->pub->corerev, 16)) {
/* extra fields for ucode AMPDU aggregation, the new fields are added to
* the END of previous structure so that it's compatible in driver.
* In old rev ucode, these fields should be ignored
*/
txh->MaxNMpdus = htol16(0);
txh->MaxABytes_MRT = htol16(0);
txh->MaxABytes_FBR = htol16(0);
txh->MinMBytes = htol16(0);
}
/* extra fields for ucode AMPDU aggregation, the new fields are added to
* the END of previous structure so that it's compatible in driver.
*/
txh->MaxNMpdus = htol16(0);
txh->MaxABytes_MRT = htol16(0);
txh->MaxABytes_FBR = htol16(0);
txh->MinMBytes = htol16(0);
/* (5) RTS/CTS: determine RTS/CTS PLCP header and MAC duration, furnish d11txh_t */
/* RTS PLCP header and RTS frame */
......@@ -6597,28 +6586,7 @@ static void *wlc_15420war(struct wlc_info *wlc, uint queue)
ASSERT(queue < NFIFO);
if ((D11REV_IS(wlc->pub->corerev, 4))
|| (D11REV_GT(wlc->pub->corerev, 6)))
return NULL;
di = wlc->hw->di[queue];
ASSERT(di != NULL);
/* get next packet, ignoring XmtStatus.Curr */
p = dma_getnexttxp(di, HNDDMA_RANGE_ALL);
/* sw block tx dma */
dma_txblock(di);
/* if tx ring is now empty, reset and re-init the tx dma channel */
if (dma_txactive(wlc->hw->di[queue]) == 0) {
wlc->pub->_cnt->txdmawar++;
if (!dma_txreset(di))
WL_ERROR("wl%d: %s: dma_txreset[%d]: cannot stop dma\n",
wlc->pub->unit, __func__, queue);
dma_txinit(di);
}
return p;
return NULL;
}
static void wlc_war16165(struct wlc_info *wlc, bool tx)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7