Merge bk://stop.crashing.org/linux-2.5-misc

into samba.org:/home/paulus/kernel/for-linus-ppc

arch/ppc/Kconfig

@@ -470,6 +470,10 @@ config PRPMC800
 
 config SANDPOINT
 	bool "Motorola-Sandpoint"
+	help
+	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
+	  or X3(b).
+	  X3 (any flavor).
 
 config ADIR
 	bool "SBS-Adirondack"
@@ -494,6 +498,11 @@ config PPC_CHRP
 	depends on PPC_MULTIPLATFORM
 	default y
 
+config PPC_GEN550
+	bool
+	depends on SANDPOINT
+	default y
+
 config PPC_PMAC
 	bool
 	depends on PPC_MULTIPLATFORM
@@ -509,10 +518,6 @@ config PPC_OF
 	depends on PPC_PMAC || PPC_CHRP
 	default y
 
-config SANDPOINT_X3
-	bool "Sandpoint X3"
-	depends on SANDPOINT
-
 config FORCE
 	bool
 	depends on 6xx && !8260 && (PCORE || POWERPMC250)
@@ -520,7 +525,7 @@ config FORCE
 
 config EPIC_SERIAL_MODE
 	bool
-	depends on 6xx && !8260 && (LOPEC || SANDPOINT_X3)
+	depends on 6xx && !8260 && (LOPEC || SANDPOINT)
 	default y
 
 config WILLOW

arch/ppc/configs/sandpoint_defconfig

@@ -66,7 +66,7 @@ CONFIG_SANDPOINT=y
 # CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
-CONFIG_SANDPOINT_X3=y
+CONFIG_PPC_GEN550=y
 CONFIG_EPIC_SERIAL_MODE=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
 # CONFIG_SMP is not set
@@ -82,8 +82,8 @@ CONFIG_ALTIVEC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
 CONFIG_KERNEL_ELF=y
+CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
@@ -115,6 +115,11 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_BOOT_LOAD=0x00800000
 
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -145,7 +150,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_MD is not set
 
 #
-# ATA/IDE/MFM/RLL support
+# ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
 
@@ -164,6 +169,7 @@ CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASKFILE_IO=y
 
 #
 # IDE chipset support/bugfixes
@@ -171,7 +177,7 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDEPCI is not set
 
 #
-# SCSI support
+# SCSI device support
 #
 # CONFIG_SCSI is not set
 
@@ -290,6 +296,7 @@ CONFIG_NET_PCI=y
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
+# CONFIG_TC35815 is not set
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
@@ -410,11 +417,6 @@ CONFIG_FONT_8x16=y
 #
 # CONFIG_LOGO is not set
 
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
 #
 # Input device support
 #
@@ -441,6 +443,7 @@ CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
 
 #
 # Input Device Drivers
@@ -729,6 +732,7 @@ CONFIG_USB_SE401=m
 #
 # USB Network adaptors
 #
+# CONFIG_USB_AX8817X is not set
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set

arch/ppc/kernel/ppc-stub.c

@@ -851,14 +851,4 @@ kgdb_output_string (const char* s, unsigned int count)
 	putpacket(buffer);
 
 	return 1;
- }
-
-#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
-
-/* This is used on arches which don't have a serial driver that maps
- * the ports for us */
-void
-kgdb_map_scc(void)
-{
 }
-#endif

arch/ppc/kernel/ppc_ksyms.c

@@ -272,8 +272,10 @@ EXPORT_SYMBOL(kd_mksound);
 #ifdef CONFIG_NVRAM
 EXPORT_SYMBOL(nvram_read_byte);
 EXPORT_SYMBOL(nvram_write_byte);
+#ifdef CONFIG_PPC_PMAC
 EXPORT_SYMBOL(pmac_xpram_read);
 EXPORT_SYMBOL(pmac_xpram_write);
+#endif
 #endif /* CONFIG_NVRAM */
 EXPORT_SYMBOL(to_tm);
 

arch/ppc/kernel/setup.c

@@ -619,6 +619,8 @@ void __init setup_arch(char **cmdline_p)
 	if (strstr(cmd_line, "nokgdb"))
 		printk("kgdb default breakpoint deactivated on command line\n");
 	else {
+		if (ppc_md.progress)
+			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
 		printk("kgdb default breakpoint activated\n");
 		breakpoint();
 	}

arch/ppc/platforms/Makefile

@@ -43,7 +43,7 @@ obj-$(CONFIG_POWERPMC250)	+= powerpmc250.o
 obj-$(CONFIG_PPLUS)		+= pplus_pci.o pplus_setup.o
 obj-$(CONFIG_PRPMC750)		+= prpmc750_setup.o prpmc750_pci.o
 obj-$(CONFIG_PRPMC800)		+= prpmc800_setup.o prpmc800_pci.o
-obj-$(CONFIG_SANDPOINT)		+= sandpoint_setup.o sandpoint_pci.o
+obj-$(CONFIG_SANDPOINT)		+= sandpoint.o
 obj-$(CONFIG_SPRUCE)		+= spruce_setup.o spruce_pci.o
 
 ifeq ($(CONFIG_SMP),y)

arch/ppc/platforms/sandpoint.h

@@ -6,7 +6,7 @@
  * Author: Mark A. Greer
  *         mgreer@mvista.com
  *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * 2000-2003 (c) MontaVista, Software, Inc.  This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
@@ -19,8 +19,8 @@
 #ifndef __PPC_PLATFORMS_SANDPOINT_H
 #define __PPC_PLATFORMS_SANDPOINT_H
 
-#ifdef CONFIG_SANDPOINT_X3
-#define SANDPOINT_SIO_SLOT      0	/* Cascaded from EPIC IRQ 0 */
+#include <asm/ppcboot.h>
+
 #if 0
 /* The Sandpoint X3 allows the IDE interrupt to be directly connected
  * from the Windbond (PCI INTC or INTD) to the serial EPIC.  Someday
@@ -34,20 +34,6 @@
 #define SANDPOINT_IDE_INT0		14	/* 8259 Test */
 #define SANDPOINT_IDE_INT1		15	/* 8259 Test */
 #endif
-#else
- /*
-  * Define the PCI slot that the 8259 is sharing interrupts with.
-  * Valid values are 1 (PCI slot 2) and 2 (PCI slot 3).
-  */
-#define SANDPOINT_SIO_SLOT      1
-
-/* ...and for the IDE from the 8259....
-*/
-#define SANDPOINT_IDE_INT0	14
-#define SANDPOINT_IDE_INT1	15
-#endif
-
-#define	SANDPOINT_SIO_IRQ	(SANDPOINT_SIO_SLOT + NUM_8259_INTERRUPTS)
 
 /*
  * The sandpoint boards have processor modules that either have an 8240 or
@@ -62,7 +48,33 @@
  */
 #define SANDPOINT_HOST_BRIDGE_IDSEL     12
 
+/*
+ * Serial defines.
+ */
+#define SANDPOINT_SERIAL_0		0xfe0003f8
+#define SANDPOINT_SERIAL_1		0xfe0002f8
+
+#define RS_TABLE_SIZE  2
+
+/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
+#define BASE_BAUD			( 1843200 / 16 )
+#define UART_CLK			1843200
+
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+#endif
+
+#define STD_SERIAL_PORT_DFNS \
+        { 0, BASE_BAUD, SANDPOINT_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
+		iomem_base: (u8 *)SANDPOINT_SERIAL_0,			  \
+		io_type: SERIAL_IO_MEM },				  \
+        { 0, BASE_BAUD, SANDPOINT_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
+		iomem_base: (u8 *)SANDPOINT_SERIAL_1,			  \
+		io_type: SERIAL_IO_MEM },
 
-void sandpoint_find_bridges(void);
+#define SERIAL_PORT_DFNS \
+        STD_SERIAL_PORT_DFNS
 
 #endif /* __PPC_PLATFORMS_SANDPOINT_H */

arch/ppc/platforms/sandpoint_pci.c

-/*
- * arch/ppc/platforms/sandpoint_pci.c
- * 
- * PCI setup routines for the Motorola SPS Sandpoint Test Platform
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc10x.h>
-
-#include "sandpoint.h"
-
-/*
- * Motorola SPS Sandpoint interrupt routing.
- */
-static inline int
-sandpoint_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE 
-	 * 	   A   B   C   D
-	 */
-	{
-		{ SANDPOINT_SIO_IRQ,
-		       0,  0,  0 },	/* IDSEL 11 - i8259 on Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-#ifdef CONFIG_SANDPOINT_X3
-#if 0	/* This is what it _should_ look like -- Dan */
-		{ 17, 20, 19, 18 },	/* IDSEL 13 - PCI slot 1 */
-		{ 18, 17, 20, 19 },	/* IDSEL 14 - PCI slot 2 */
-		{ 19, 18, 17, 20 },	/* IDSEL 15 - PCI slot 3 */
-		{ 20, 19, 18, 17 },	/* IDSEL 16 - PCI slot 4 */
-#else
-		{ 18, 21, 20, 19 },	/* IDSEL 13 - PCI slot 1 */
-		{ 19, 18, 21, 20 },	/* IDSEL 14 - PCI slot 2 */
-		{ 20, 19, 18, 21 },	/* IDSEL 15 - PCI slot 3 */
-		{ 21, 20, 19, 18 },	/* IDSEL 16 - PCI slot 4 */
-#endif
-#else
-		{ 16, 19, 18, 17 },	/* IDSEL 13 - PCI slot 1 */
-		{ 17, 16, 19, 18 },	/* IDSEL 14 - PCI slot 2 */
-		{ 18, 17, 16, 19 },	/* IDSEL 15 - PCI slot 3 */
-		{ 19, 18, 17, 16 },	/* IDSEL 16 - PCI slot 4 */
-#endif
-	};
-
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init
-sandpoint_setup_winbond_83553(struct pci_controller *hose)
-{
-	int		devfn;
-
-	/*
-	 * Route IDE interrupts directly to the 8259's IRQ 14 & 15.
-	 * We can't route the IDE interrupt to PCI INTC# or INTD# because those
-	 * woule interfere with the PMC's INTC# and INTD# lines.
-	 */
-	/*
-	 * Winbond Fcn 0
-	 */
-	devfn = PCI_DEVFN(11,0);
-
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x43, /* IDE Interrupt Routing Control */
-				0xef);
-	early_write_config_word(hose,
-				0,
-				devfn,
-				0x44, /* PCI Interrupt Routing Control */
-				0x0000);
-
-	/* Want ISA memory cycles to be forwarded to PCI bus */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x48, /* ISA-to-PCI Addr Decoder Control */
-				0xf0);
-
-	/* Enable RTC and Keyboard address locations.  */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x4d,	/* Chip Select Control Register */
-				0x00);
-
-	/* Enable Port 92.  */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x4e,	/* AT System Control Register */
-				0x06);
-	/*
-	 * Winbond Fcn 1
-	 */
-	devfn = PCI_DEVFN(11,1);
-
-	/* Put IDE controller into native mode. */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x09,	/* Programming interface Register */
-				0x8f);
-
-	/* Init IRQ routing, enable both ports, disable fast 16 */
-	early_write_config_dword(hose,
-				0,
-				devfn,
-				0x40,	/* IDE Control/Status Register */
-				0x00ff0011);
-	return;
-}
-
-static int                     
-sandpoint_exclude_device(u_char bus, u_char devfn)
-{
-	if ((bus == 0) && (PCI_SLOT(devfn) == SANDPOINT_HOST_BRIDGE_IDSEL)) {
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	else {
-		return PCIBIOS_SUCCESSFUL;
-	}
-}
-
-void __init
-sandpoint_find_bridges(void)
-{
-	struct pci_controller	*hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		/* Do early winbond init, then scan PCI bus */
-		sandpoint_setup_winbond_83553(hose);
-		ppc_md.pci_exclude_device = sandpoint_exclude_device;
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-		ppc_md.pcibios_fixup = NULL;
-		ppc_md.pcibios_fixup_bus = NULL;
-		ppc_md.pci_swizzle = common_swizzle;
-		ppc_md.pci_map_irq = sandpoint_map_irq;
-	}
-	else {
-		if (ppc_md.progress)
-			ppc_md.progress("Bridge init failed", 0x100);
-		printk("Host bridge init failed\n");
-	}
-
-	return;
-}

arch/ppc/platforms/sandpoint_serial.h

-/*
- * include/asm-ppc/sandpoint_serial.h
- * 
- * Definitions for Motorola SPS Sandpoint Test Platform
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_SANDPOINT_SERIAL_H
-#define __ASMPPC_SANDPOINT_SERIAL_H
-
-#include <linux/config.h>
-
-#define SANDPOINT_SERIAL_0		0xfe0003f8
-#define SANDPOINT_SERIAL_1		0xfe0002f8
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  2
-#endif
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_0,			  \
-		io_type: SERIAL_IO_MEM },				  \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_1,			  \
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif /* __ASMPPC_SANDPOINT_SERIAL_H */

arch/ppc/syslib/Makefile

@@ -62,5 +62,8 @@ obj-$(CONFIG_SANDPOINT)		+= i8259.o open_pic.o mpc10x_common.o \
 obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o indirect_pci.o pci_auto.o \
 				   todc_time.o
 obj-$(CONFIG_8260)		+= m8260_setup.o ppc8260_pic.o
+ifeq ($(CONFIG_SERIAL_8250)$(CONFIG_PPC_GEN550),yy)
+obj-$(CONFIG_KGDB)		+= gen550_kgdb.o gen550_dbg.o
+obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
+endif
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-

arch/ppc/syslib/gen550_dbg.c

+/*
+ * arch/ppc/syslib/gen550_dbg.c
+ *
+ * A library of polled 16550 serial routines.  These are intended to
+ * be used to support progress messages, xmon, kgdb, etc. on a
+ * variety of platforms.
+ *
+ * Adapted from lots of code ripped from the arch/ppc/boot/ polled
+ * 16550 support.
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/tty.h>		/* For linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <asm/machdep.h>
+#include <asm/serial.h>
+#include <asm/io.h>
+
+#define SERIAL_BAUD	9600
+
+static struct serial_state rs_table[RS_TABLE_SIZE] = {
+	SERIAL_PORT_DFNS	/* defined in <asm/serial.h> */
+};
+
+static void (*serial_outb)(unsigned long, unsigned char);
+static unsigned long (*serial_inb)(unsigned long);
+
+static int shift;
+
+unsigned long direct_inb(unsigned long addr)
+{
+	return readb(addr);
+}
+
+void direct_outb(unsigned long addr, unsigned char val)
+{
+	writeb(val, addr);
+}
+
+unsigned long io_inb(unsigned long port)
+{
+	return inb(port);
+}
+
+void io_outb(unsigned long port, unsigned char val)
+{
+	outb(val, port);
+}
+
+unsigned long serial_init(int chan, void *ignored)
+{
+	unsigned long com_port;
+	unsigned char lcr, dlm;
+
+	/* We need to find out which type io we're expecting.  If it's
+	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
+	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
+	switch (rs_table[chan].io_type) {
+		case SERIAL_IO_PORT:
+			com_port = rs_table[chan].port;
+			serial_outb = io_outb;
+			serial_inb = io_inb;
+			break;
+		case SERIAL_IO_MEM:
+			com_port = (unsigned long)rs_table[chan].iomem_base;
+			serial_outb = direct_outb;
+			serial_inb = direct_inb;
+			break;
+		default:
+			/* We can't deal with it. */
+			return -1;
+	}
+
+	/* How far apart the registers are. */
+	shift = rs_table[chan].iomem_reg_shift;
+
+	/* save the LCR */
+	lcr = serial_inb(com_port + (UART_LCR << shift));
+	
+	/* Access baud rate */
+	serial_outb(com_port + (UART_LCR << shift), UART_LCR_DLAB);
+	dlm = serial_inb(com_port + (UART_DLM << shift));
+
+	/*
+	 * Test if serial port is unconfigured
+	 * We assume that no-one uses less than 110 baud or
+	 * less than 7 bits per character these days.
+	 *  -- paulus.
+	 */
+	if ((dlm <= 4) && (lcr & 2)) {
+		/* port is configured, put the old LCR back */
+		serial_outb(com_port + (UART_LCR << shift), lcr);
+	}
+	else {
+		/* Input clock. */
+		serial_outb(com_port + (UART_DLL << shift),
+			(rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
+		serial_outb(com_port + (UART_DLM << shift),
+				(rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
+		/* 8 data, 1 stop, no parity */
+		serial_outb(com_port + (UART_LCR << shift), 0x03);
+		/* RTS/DTR */
+		serial_outb(com_port + (UART_MCR << shift), 0x03);
+
+		/* Clear & enable FIFOs */
+		serial_outb(com_port + (UART_FCR << shift), 0x07);
+	}
+
+	return (com_port);
+}
+
+void
+serial_putc(unsigned long com_port, unsigned char c)
+{
+	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
+		;
+	serial_outb(com_port, c);
+}
+
+unsigned char
+serial_getc(unsigned long com_port)
+{
+	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
+		;
+	return serial_inb(com_port);
+}
+
+int
+serial_tstc(unsigned long com_port)
+{
+	return ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
+}
+
+void
+serial_close(unsigned long com_port)
+{
+}
+
+void
+gen550_init(int i, struct uart_port *serial_req)
+{
+	rs_table[i].io_type = serial_req->iotype;
+	rs_table[i].port = serial_req->line;
+	rs_table[i].iomem_base = serial_req->membase;
+	rs_table[i].iomem_reg_shift = serial_req->regshift;
+}
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+void
+gen550_progress(char *s, unsigned short hex)
+{
+	volatile unsigned int progress_debugport;
+	volatile char c;
+
+	progress_debugport = serial_init(0, NULL);
+
+	serial_putc(progress_debugport, '\r');
+
+	while ((c = *s++) != 0)
+		serial_putc(progress_debugport, c);
+
+	serial_putc(progress_debugport, '\n');
+	serial_putc(progress_debugport, '\r');
+}
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */

arch/ppc/syslib/gen550_kgdb.c

+/*
+ * arch/ppc/syslib/gen550_kgdb.c
+ *
+ * Generic 16550 kgdb support intended to be useful on a variety
+ * of platforms.  To enable this support, it is necessary to set
+ * the CONFIG_GEN550 option.  Any virtual mapping of the serial
+ * port(s) to be used can be accomplished by setting
+ * ppc_md.early_serial_map to a platform-specific mapping function.
+ *
+ * Adapted from ppc4xx_kgdb.c. 
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/machdep.h>
+
+extern unsigned long serial_init(int, void *);
+extern unsigned long serial_getc(unsigned long);
+extern unsigned long serial_putc(unsigned long, unsigned char);
+
+#if defined(CONFIG_KGDB_TTYS0)
+#define KGDB_PORT 0
+#elif defined(CONFIG_KGDB_TTYS1)
+#define KGDB_PORT 1
+#elif defined(CONFIG_KGDB_TTYS2)
+#define KGDB_PORT 2
+#elif defined(CONFIG_KGDB_TTYS3)
+#define KGDB_PORT 3
+#else
+#error "invalid kgdb_tty port"
+#endif
+
+static volatile unsigned int kgdb_debugport;
+
+void putDebugChar(unsigned char c)
+{
+	if (kgdb_debugport == 0)
+		kgdb_debugport = serial_init(KGDB_PORT, NULL);
+
+	serial_putc(kgdb_debugport, c);
+}
+
+int getDebugChar(void)
+{
+	if (kgdb_debugport == 0)
+		kgdb_debugport = serial_init(KGDB_PORT, NULL);
+
+	return(serial_getc(kgdb_debugport));
+}
+
+void kgdb_interruptible(int enable)
+{
+	return;
+}
+
+void putDebugString(char* str)
+{
+	while (*str != '\0') {
+		putDebugChar(*str);
+		str++;
+	}
+	putDebugChar('\r');
+	return;
+}
+
+/*
+ * Note: gen550_init() must be called already on the port we are going
+ * to use.
+ */
+void
+kgdb_map_scc(void)
+{
+	printk(KERN_DEBUG "kgdb init\n");
+	kgdb_debugport = serial_init(KGDB_PORT, NULL);
+}

arch/ppc/syslib/open_pic.c

@@ -33,6 +33,7 @@
 
 void* OpenPIC_Addr;
 static volatile struct OpenPIC *OpenPIC = NULL;
+
 /*
  * We define OpenPIC_InitSenses table thusly:
  * bit 0x1: sense, 0 for edge and 1 for level.
@@ -261,32 +262,32 @@ static void openpic_safe_writefield_IPI(volatile u_int *addr, u_int mask, u_int
 }
 #endif /* CONFIG_SMP */
 
-#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PMAC_PBOOK)
-static void openpic_reset(void)
+#ifdef CONFIG_EPIC_SERIAL_MODE
+static void __init openpic_eicr_set_clk(u_int clkval)
 {
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
+	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
+			OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
 }
-#endif
 
-#ifdef CONFIG_EPIC_SERIAL_MODE
-static void openpic_enable_sie(void)
+static void __init openpic_enable_sie(void)
 {
 	openpic_setfield(&OpenPIC->Global.Global_Configuration1,
 			OPENPIC_EICR_SIE);
 }
+#endif
 
-static void openpic_eicr_set_clk(u_int clkval)
+#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PMAC_PBOOK)
+static void openpic_reset(void)
 {
-	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
-			 OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
+	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
+			 OPENPIC_CONFIG_RESET);
+	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
+				 OPENPIC_CONFIG_RESET))
+		mb();
 }
 #endif
 
-void openpic_set_sources(int first_irq, int num_irqs, void *first_ISR)
+void __init openpic_set_sources(int first_irq, int num_irqs, void *first_ISR)
 {
 	volatile OpenPIC_Source *src = first_ISR;
 	int i, last_irq;
@@ -300,7 +301,14 @@ void openpic_set_sources(int first_irq, int num_irqs, void *first_ISR)
 		ISR[i] = src;
 }
 
-void __init openpic_init(int linux_irq_offset)
+/*
+ * The `offset' parameter defines where the interrupts handled by the
+ * OpenPIC start in the space of interrupt numbers that the kernel knows
+ * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
+ * kernel's interrupt numbering scheme.
+ * We assume there is only one OpenPIC.
+ */
+void __init openpic_init(int offset)
 {
 	u_int t, i;
 	u_int timerfreq;
@@ -349,13 +357,13 @@ void __init openpic_init(int linux_irq_offset)
 		printk("OpenPIC timer frequency is %d.%06d MHz\n",
 		       timerfreq / 1000000, timerfreq % 1000000);
 
-	open_pic_irq_offset = linux_irq_offset;
+	open_pic_irq_offset = offset;
 
 	/* Initialize timer interrupts */
 	if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
 	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
 		/* Disabled, Priority 0 */
-		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+linux_irq_offset);
+		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
 		/* No processor */
 		openpic_maptimer(i, 0);
 	}
@@ -365,12 +373,10 @@ void __init openpic_init(int linux_irq_offset)
 	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
 	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
 		/* Disabled, Priority 10..13 */
-		openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+linux_irq_offset);
+		openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+offset);
 		/* IPIs are per-CPU */
-		irq_desc[OPENPIC_VEC_IPI+i+linux_irq_offset].status |=
-			IRQ_PER_CPU;
-		irq_desc[OPENPIC_VEC_IPI+i+linux_irq_offset].handler =
-			&open_pic_ipi;
+		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
+		irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi;
 	}
 #endif
 
@@ -387,36 +393,32 @@ void __init openpic_init(int linux_irq_offset)
 			continue;
 
 		/* the bootloader may have left it enabled (bad !) */
-		openpic_disable_irq(i+linux_irq_offset);
+		openpic_disable_irq(i+offset);
 
-		/*
-		 * We find the value from either the InitSenses table
-		 * or assume a negative polarity level interrupt.
-		 */
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: 1;
+		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
+				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
 
-		if ((sense & IRQ_SENSE_MASK) == 1)
-			irq_desc[i+linux_irq_offset].status = IRQ_LEVEL;
+		if (sense & IRQ_SENSE_MASK)
+			irq_desc[i+offset].status = IRQ_LEVEL;
 
 		/* Enabled, Priority 8 */
-		openpic_initirq(i, 8, i + linux_irq_offset,
-				(sense & IRQ_POLARITY_MASK),
+		openpic_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
 				(sense & IRQ_SENSE_MASK));
 		/* Processor 0 */
 		openpic_mapirq(i, 1<<0, 0);
 	}
 
 	/* Init descriptors */
-	for (i = linux_irq_offset; i < NumSources + linux_irq_offset; i++)
+	for (i = offset; i < NumSources + offset; i++)
 		irq_desc[i].handler = &open_pic;
 
 	/* Initialize the spurious interrupt */
 	if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
-	openpic_set_spurious(OPENPIC_VEC_SPURIOUS+linux_irq_offset);
+	openpic_set_spurious(OPENPIC_VEC_SPURIOUS+offset);
 
 	/* Initialize the cascade */
-	if (linux_irq_offset) {
-		if (request_irq(linux_irq_offset, no_action, SA_INTERRUPT,
+	if (offset) {
+		if (request_irq(offset, no_action, SA_INTERRUPT,
 				"82c59 cascade", NULL))
 			printk("Unable to get OpenPIC IRQ 0 for cascade\n");
 	}
@@ -479,7 +481,7 @@ static u_int openpic_get_priority(void)
 }
 #endif /* notused */
 
-static void openpic_set_priority(u_int pri)
+static void __init openpic_set_priority(u_int pri)
 {
 	DECL_THIS_CPU;
 
@@ -656,29 +658,18 @@ static void __init openpic_maptimer(u_int timer, u_int cpumask)
 }
 
 /*
- * Initalize the interrupt source which will generate an NMI (and disable it).
+ * Initalize the interrupt source which will generate an NMI.
+ * This raises the interrupt's priority from 8 to 9.
  *
  * irq: The logical IRQ which generates an NMI.
  */
 void __init
 openpic_init_nmi_irq(u_int irq)
 {
-	int sense;
-
-	/* If this wasn't given, assume a level, negative polarity interrupt. */
-	sense = (irq < OpenPIC_NumInitSenses) ? OpenPIC_InitSenses[irq] :
-		(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(9 << OPENPIC_PRIORITY_SHIFT) |
-				(irq + open_pic_irq_offset) |
-				((sense & IRQ_POLARITY_MASK) ?
-				 OPENPIC_POLARITY_POSITIVE :
-				 OPENPIC_POLARITY_NEGATIVE) |
-				((sense & IRQ_SENSE_MASK) ? OPENPIC_SENSE_LEVEL
-				 : OPENPIC_SENSE_EDGE));
+	check_arg_irq(irq);
+	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
+				OPENPIC_PRIORITY_MASK,
+				9 << OPENPIC_PRIORITY_SHIFT);
 }
 
 /*
@@ -752,7 +743,8 @@ void openpic_disable_ipi(u_int irq)
  *  pol: polarity (1 for positive, 0 for negative)
  *  sense: 1 for level, 0 for edge
  */
-static void openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
+static void __init
+openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
 {
 	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
 				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |

include/asm-ppc/serial.h

@@ -25,7 +25,7 @@
 #elif defined(CONFIG_PRPMC800)
 #include <platforms/prpmc800_serial.h>
 #elif defined(CONFIG_SANDPOINT)
-#include <platforms/sandpoint_serial.h>
+#include <platforms/sandpoint.h>
 #elif defined(CONFIG_SPRUCE)
 #include <platforms/spruce_serial.h>
 #elif defined(CONFIG_40x)