mfd: da9052: Fix register access via SPI

The range of registers used by this driver exceeds that available
via SPI with no paging (127), so we have to override the values
from the default config which is set-up for I2C access.
Also change SPI settings to match device's recommended OTP values.
Signed-off-by: Adam Ward <adam.ward.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/da9052-spi.c

@@ -32,7 +32,7 @@ static int da9052_spi_probe(struct spi_device *spi)
 	if (!da9052)
 		return -ENOMEM;
 
-	spi->mode = SPI_MODE_0 | SPI_CPOL;
+	spi->mode = SPI_MODE_0;
 	spi->bits_per_word = 8;
 	spi_setup(spi);
 
@@ -43,6 +43,10 @@ static int da9052_spi_probe(struct spi_device *spi)
 
 	config = da9052_regmap_config;
 	config.read_flag_mask = 1;
+	config.reg_bits = 7;
+	config.pad_bits = 1;
+	config.val_bits = 8;
+	config.use_single_rw = 1;
 
 	da9052->regmap = devm_regmap_init_spi(spi, &config);
 	if (IS_ERR(da9052->regmap)) {