Commit 72fadb13 authored by Victor Zhao's avatar Victor Zhao Committed by Alex Deucher

drm/amdgpu: revert context to stop engine before mode2 reset

For some hang caused by slow tests, engine cannot be stopped which
may cause resume failure after reset. In this case, force halt
engine by reverting context addresses
Signed-off-by: default avatarVictor Zhao <Victor.Zhao@amd.com>
Acked-by: default avatarAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent bfaced6e
...@@ -5039,6 +5039,7 @@ static void amdgpu_device_recheck_guilty_jobs( ...@@ -5039,6 +5039,7 @@ static void amdgpu_device_recheck_guilty_jobs(
/* set guilty */ /* set guilty */
drm_sched_increase_karma(s_job); drm_sched_increase_karma(s_job);
amdgpu_reset_prepare_hwcontext(adev, reset_context);
retry: retry:
/* do hw reset */ /* do hw reset */
if (amdgpu_sriov_vf(adev)) { if (amdgpu_sriov_vf(adev)) {
......
...@@ -37,6 +37,7 @@ struct amdgpu_gfxhub_funcs { ...@@ -37,6 +37,7 @@ struct amdgpu_gfxhub_funcs {
void (*utcl2_harvest)(struct amdgpu_device *adev); void (*utcl2_harvest)(struct amdgpu_device *adev);
void (*mode2_save_regs)(struct amdgpu_device *adev); void (*mode2_save_regs)(struct amdgpu_device *adev);
void (*mode2_restore_regs)(struct amdgpu_device *adev); void (*mode2_restore_regs)(struct amdgpu_device *adev);
void (*halt)(struct amdgpu_device *adev);
}; };
struct amdgpu_gfxhub { struct amdgpu_gfxhub {
......
...@@ -646,6 +646,41 @@ static void gfxhub_v2_1_restore_regs(struct amdgpu_device *adev) ...@@ -646,6 +646,41 @@ static void gfxhub_v2_1_restore_regs(struct amdgpu_device *adev)
WREG32_SOC15(GC, 0, mmGCMC_VM_MX_L1_TLB_CNTL, adev->gmc.MC_VM_MX_L1_TLB_CNTL); WREG32_SOC15(GC, 0, mmGCMC_VM_MX_L1_TLB_CNTL, adev->gmc.MC_VM_MX_L1_TLB_CNTL);
} }
static void gfxhub_v2_1_halt(struct amdgpu_device *adev)
{
struct amdgpu_vmhub *hub = &adev->vmhub[AMDGPU_GFXHUB_0];
int i;
uint32_t tmp;
int time = 1000;
gfxhub_v2_1_set_fault_enable_default(adev, false);
for (i = 0; i <= 14; i++) {
WREG32_SOC15_OFFSET(GC, 0, mmGCVM_CONTEXT1_PAGE_TABLE_START_ADDR_LO32,
i * hub->ctx_addr_distance, ~0);
WREG32_SOC15_OFFSET(GC, 0, mmGCVM_CONTEXT1_PAGE_TABLE_START_ADDR_HI32,
i * hub->ctx_addr_distance, ~0);
WREG32_SOC15_OFFSET(GC, 0, mmGCVM_CONTEXT1_PAGE_TABLE_END_ADDR_LO32,
i * hub->ctx_addr_distance,
0);
WREG32_SOC15_OFFSET(GC, 0, mmGCVM_CONTEXT1_PAGE_TABLE_END_ADDR_HI32,
i * hub->ctx_addr_distance,
0);
}
tmp = RREG32_SOC15(GC, 0, mmGRBM_STATUS2);
while ((tmp & (GRBM_STATUS2__EA_BUSY_MASK |
GRBM_STATUS2__EA_LINK_BUSY_MASK)) != 0 &&
time) {
udelay(100);
time--;
tmp = RREG32_SOC15(GC, 0, mmGRBM_STATUS2);
}
if (!time) {
DRM_WARN("failed to wait for GRBM(EA) idle\n");
}
}
const struct amdgpu_gfxhub_funcs gfxhub_v2_1_funcs = { const struct amdgpu_gfxhub_funcs gfxhub_v2_1_funcs = {
.get_fb_location = gfxhub_v2_1_get_fb_location, .get_fb_location = gfxhub_v2_1_get_fb_location,
.get_mc_fb_offset = gfxhub_v2_1_get_mc_fb_offset, .get_mc_fb_offset = gfxhub_v2_1_get_mc_fb_offset,
...@@ -658,4 +693,5 @@ const struct amdgpu_gfxhub_funcs gfxhub_v2_1_funcs = { ...@@ -658,4 +693,5 @@ const struct amdgpu_gfxhub_funcs gfxhub_v2_1_funcs = {
.utcl2_harvest = gfxhub_v2_1_utcl2_harvest, .utcl2_harvest = gfxhub_v2_1_utcl2_harvest,
.mode2_save_regs = gfxhub_v2_1_save_regs, .mode2_save_regs = gfxhub_v2_1_save_regs,
.mode2_restore_regs = gfxhub_v2_1_restore_regs, .mode2_restore_regs = gfxhub_v2_1_restore_regs,
.halt = gfxhub_v2_1_halt,
}; };
...@@ -97,6 +97,8 @@ sienna_cichlid_mode2_prepare_hwcontext(struct amdgpu_reset_control *reset_ctl, ...@@ -97,6 +97,8 @@ sienna_cichlid_mode2_prepare_hwcontext(struct amdgpu_reset_control *reset_ctl,
if (!amdgpu_sriov_vf(adev)) { if (!amdgpu_sriov_vf(adev)) {
if (adev->gfxhub.funcs->mode2_save_regs) if (adev->gfxhub.funcs->mode2_save_regs)
adev->gfxhub.funcs->mode2_save_regs(adev); adev->gfxhub.funcs->mode2_save_regs(adev);
if (adev->gfxhub.funcs->halt)
adev->gfxhub.funcs->halt(adev);
r = sienna_cichlid_mode2_suspend_ip(adev); r = sienna_cichlid_mode2_suspend_ip(adev);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment