Commit 73629bbc authored by Jesse Brandeburg's avatar Jesse Brandeburg Committed by Jeff Garzik

[PATCH] e1000: Added driver comments

Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent 96838a40
......@@ -29,11 +29,73 @@
#include "e1000.h"
/* Change Log
* 6.0.58 4/20/05
* o Accepted ethtool cleanup patch from Stephen Hemminger
* 6.0.44+ 2/15/05
* o applied Anton's patch to resolve tx hang in hardware
* o Applied Andrew Mortons patch - e1000 stops working after resume
* 6.3.9 12/16/2005
* o incorporate fix for recycled skbs from IBM LTC
* 6.3.7 11/18/2005
* o Honor eeprom setting for enabling/disabling Wake On Lan
* 6.3.5 11/17/2005
* o Fix memory leak in rx ring handling for PCI Express adapters
* 6.3.4 11/8/05
* o Patch from Jesper Juhl to remove redundant NULL checks for kfree
* 6.3.2 9/20/05
* o Render logic that sets/resets DRV_LOAD as inline functions to
* avoid code replication. If f/w is AMT then set DRV_LOAD only when
* network interface is open.
* o Handle DRV_LOAD set/reset in cases where AMT uses VLANs.
* o Adjust PBA partioning for Jumbo frames using MTU size and not
* rx_buffer_len
* 6.3.1 9/19/05
* o Use adapter->tx_timeout_factor in Tx Hung Detect logic
(e1000_clean_tx_irq)
* o Support for 8086:10B5 device (Quad Port)
* 6.2.14 9/15/05
* o In AMT enabled configurations, set/reset DRV_LOAD bit on interface
* open/close
* 6.2.13 9/14/05
* o Invoke e1000_check_mng_mode only for 8257x controllers since it
* accesses the FWSM that is not supported in other controllers
* 6.2.12 9/9/05
* o Add support for device id E1000_DEV_ID_82546GB_QUAD_COPPER
* o set RCTL:SECRC only for controllers newer than 82543.
* o When the n/w interface comes down reset DRV_LOAD bit to notify f/w.
* This code was moved from e1000_remove to e1000_close
* 6.2.10 9/6/05
* o Fix error in updating RDT in el1000_alloc_rx_buffers[_ps] -- one off.
* o Enable fc by default on 82573 controllers (do not read eeprom)
* o Fix rx_errors statistic not to include missed_packet_count
* o Fix rx_dropped statistic not to include missed_packet_count
(Padraig Brady)
* 6.2.9 8/30/05
* o Remove call to update statistics from the controller ib e1000_get_stats
* 6.2.8 8/30/05
* o Improved algorithm for rx buffer allocation/rdt update
* o Flow control watermarks relative to rx PBA size
* o Simplified 'Tx Hung' detect logic
* 6.2.7 8/17/05
* o Report rx buffer allocation failures and tx timeout counts in stats
* 6.2.6 8/16/05
* o Implement workaround for controller erratum -- linear non-tso packet
* following a TSO gets written back prematurely
* 6.2.5 8/15/05
* o Set netdev->tx_queue_len based on link speed/duplex settings.
* o Fix net_stats.rx_fifo_errors <p@draigBrady.com>
* o Do not power off PHY if SoL/IDER session is active
* 6.2.4 8/10/05
* o Fix loopback test setup/cleanup for 82571/3 controllers
* o Fix parsing of outgoing packets (e1000_transfer_dhcp_info) to treat
* all packets as raw
* o Prevent operations that will cause the PHY to be reset if SoL/IDER
* sessions are active and log a message
* 6.2.2 7/21/05
* o used fixed size descriptors for all MTU sizes, reduces memory load
* 6.2.1 7/21/05
* o Performance tweaks, including copybreak and prefetch
* 6.1.2 4/13/05
* o Fixed ethtool diagnostics
* o Enabled flow control to take default eeprom settings
* o Added stats_lock around e1000_read_phy_reg commands to avoid concurrent
* calls, one from mii_ioctl and other from within update_stats while
* processing MIIREG ioctl.
*/
char e1000_driver_name[] = "e1000";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment