Merge tag 'asm-generic-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull alpha updates from Arnd Bergmann:
 "I had investigated dropping support for alpha EV5 and earlier a while
  ago after noticing that this is the only supported CPU family in the
  kernel without native byte access and that Debian has already dropped
  support for this generation last year [1] in order to improve
  performance for the newer machines.

  This topic came up again when Paul McKenney noticed that parts of the
  RCU code already rely on byte access and do not work on alpha EV5
  reliably, so we decided on using my series to avoid the problem
  entirely.

  Al Viro did another series for alpha to address all the known build
  issues. I rebased his patches without any further changes and included
  it as a baseline for my work here to avoid conflicts and allow
  backporting the fixes to stable kernels for the now removed hardware
  support as well"

[ I dearly loved alpha back in the days, but the lack of byte and word
  operations was a horrible mistake and made everything worse -
  including very much the crazy IO contortions that resulted from it.

  It certainly wasn't the only mistake in the architecture, but it's the
  first-order issue.

  So while it's a bit sad to see the support for my first alpha go away,
  if you want to run museum hardware, maybe you should use museum
  kernels..    - Linus ]

* tag 'asm-generic-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  alpha: drop pre-EV56 support
  alpha: cabriolet: remove EV5 CPU support
  alpha: remove LCA and APECS based machines
  alpha: sable: remove early machine support
  alpha: remove DECpc AXP150 (Jensen) support
  alpha: trim the unused stuff from asm-offsets.c
  alpha: jensen, t2 - make __EXTERN_INLINE same as for the rest
  alpha: core_lca: take the unused functions out
  alpha: missing includes
  alpha: sys_sio: fix misspelled ifdefs
  alpha: don't make functions public without a reason
  alpha: add clone3() support
  alpha: fix modversions for strcpy() et.al.
  alpha: sort scr_mem{cpy,move}w() out

Documentation/driver-api/eisa.rst

@@ -196,8 +196,8 @@ eisa_bus.disable_dev
 virtual_root.force_probe
 	Force the probing code to probe EISA slots even when it cannot find an
 	EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
-	(don't force), and set to 1 (force probing) when either
-	CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
+	(don't force), and set to 1 (force probing) when
+	CONFIG_EISA_VLB_PRIMING is set.
 
 Random notes
 ============

arch/alpha/Kconfig

@@ -10,7 +10,7 @@ config ALPHA
 	select ARCH_NO_SG_CHAIN
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select DMA_OPS if PCI
-	select FORCE_PCI if !ALPHA_JENSEN
+	select FORCE_PCI
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
 	select HAVE_ASM_MODVERSIONS
@@ -90,22 +90,11 @@ choice
 	  <http://www.alphalinux.org/>. In summary:
 
 	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
-	  Alpha-XL            XL-233, XL-266
-	  AlphaBook1          Alpha laptop
-	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-	  Cabriolet           AlphaPC64, AlphaPCI64
 	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
-	  EB164               EB164 21164 evaluation board
-	  EB64+               EB64+ 21064 evaluation board
-	  EB66                EB66 21066 evaluation board
-	  EB66+               EB66+ 21066 evaluation board
-	  Jensen              DECpc 150, DEC 2000 models 300, 500
 	  LX164               AlphaPC164-LX
-	  Lynx                AS 2100A
 	  Miata               Personal Workstation 433/500/600 a/au
 	  Marvel              AlphaServer ES47 / ES80 / GS1280
 	  Mikasa              AS 1000
-	  Noname              AXPpci33, UDB (Multia)
 	  Noritake            AS 1000A, AS 600A, AS 800
 	  PC164               AlphaPC164
 	  Rawhide             AS 1200, AS 4000, AS 4100
@@ -137,27 +126,6 @@ config ALPHA_ALCOR
 	  all the work required to support an external Bcache and to maintain
 	  memory coherence when a PCI device DMAs into (or out of) memory.
 
-config ALPHA_XL
-	bool "Alpha-XL"
-	help
-	  XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
-	bool "AlphaBook1"
-	help
-	  Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
-	bool "Avanti"
-
-config ALPHA_CABRIOLET
-	bool "Cabriolet"
-	help
-	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-	  Bcache SIMMs.  Requires power supply with 3.3V output.
-
 config ALPHA_DP264
 	bool "DP264"
 	help
@@ -165,62 +133,18 @@ config ALPHA_DP264
 	  API Networks: 264DP, UP2000(+), CS20;
 	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
 
-config ALPHA_EB164
-	bool "EB164"
-	help
-	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-	  motherboard.  Requires power supply with 3.3V output.
-
-config ALPHA_EB64P_CH
-	bool "EB64+"
-
-config ALPHA_EB66
-	bool "EB66"
-	help
-	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-	  supply.  The EB66 schematic was published as a marketing poster
-	  advertising the 21066 as "the first microprocessor in the world with
-	  embedded PCI".
-
-config ALPHA_EB66P
-	bool "EB66+"
-	help
-	  Later variant of the EB66 board.
-
 config ALPHA_EIGER
 	bool "Eiger"
 	help
 	  Apparently an obscure OEM single-board computer based on the
 	  Typhoon/Tsunami chipset family. Information on it is scanty.
 
-config ALPHA_JENSEN
-	bool "Jensen"
-	select HAVE_EISA
-	help
-	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-	  of the first-generation Alpha systems. A number of these systems
-	  seem to be available on the second- hand market. The Jensen is a
-	  floor-standing tower system which originally used a 150MHz 21064 It
-	  used programmable logic to interface a 486 EISA I/O bridge to the
-	  CPU.
-
 config ALPHA_LX164
 	bool "LX164"
 	help
 	  A technical overview of this board is available at
 	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
 
-config ALPHA_LYNX
-	bool "Lynx"
-	select HAVE_EISA
-	help
-	  AlphaServer 2100A-based systems.
-
 config ALPHA_MARVEL
 	bool "Marvel"
 	help
@@ -243,9 +167,6 @@ config ALPHA_NAUTILUS
 	help
 	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
 
-config ALPHA_NONAME_CH
-	bool "Noname"
-
 config ALPHA_NORITAKE
 	bool "Noritake"
 	select HAVE_EISA
@@ -256,9 +177,6 @@ config ALPHA_NORITAKE
 config ALPHA_PC164
 	bool "PC164"
 
-config ALPHA_P2K
-	bool "Platform2000"
-
 config ALPHA_RAWHIDE
 	bool "Rawhide"
 	select HAVE_EISA
@@ -322,84 +240,18 @@ config ISA_DMA_API
 	bool
 	default y
 
-config ALPHA_NONAME
-	bool
-	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-	default y
-	help
-	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-	  is a baby-AT size, and runs from a standard PC power supply. It has
-	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-	  2 versions, with either PS/2 or large DIN connectors for the
-	  keyboard.
-
-config ALPHA_EV4
-	bool
-	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y if !ALPHA_LYNX
-	default y if !ALPHA_EV5
-
-config ALPHA_LCA
-	bool
-	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y
-
-config ALPHA_APECS
-	bool
-	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
-	default y
-
-config ALPHA_EB64P
-	bool
-	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
-	default y
-	help
-	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-	  Runs from standard PC power supply.
-
-config ALPHA_EV5
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
-	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
 config ALPHA_CIA
 	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
 	default y
 
 config ALPHA_EV56
-	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
-	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 333MHz)?"
-	depends on ALPHA_NORITAKE || ALPHA_PRIMO
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 400MHz)?"
-	depends on ALPHA_RAWHIDE
-
-config ALPHA_PRIMO
-	bool "EV5 CPU daughtercard (model 5/xxx)?"
-	depends on ALPHA_NORITAKE || ALPHA_MIKASA
-	help
-	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-config ALPHA_GAMMA
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_SABLE
-	depends on ALPHA_SABLE || ALPHA_LYNX
-	default ALPHA_LYNX
-	help
-	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
+	bool
+	default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE
 
 config ALPHA_T2
 	bool
-	depends on ALPHA_SABLE || ALPHA_LYNX
+	depends on ALPHA_SABLE
 	default y
 
 config ALPHA_PYXIS
@@ -443,15 +295,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y if !ALPHA_EV67
 
-config ALPHA_AVANTI
-	bool
-	depends on ALPHA_XL || ALPHA_AVANTI_CH
-	default y
-	help
-	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-	  Alphas. Info at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
 config ALPHA_BROKEN_IRQ_MASK
 	bool
 	depends on ALPHA_GENERIC || ALPHA_PC164
@@ -481,9 +324,9 @@ config ALPHA_QEMU
 
 
 config ALPHA_SRM
-	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
 	depends on TTY
-	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+	default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
 	help
 	  There are two different types of booting firmware on Alphas: SRM,
 	  which is command line driven, and ARC, which uses menus and arrow
@@ -509,7 +352,7 @@ config ARCH_MAY_HAVE_PC_FDC
 
 config SMP
 	bool "Symmetric multi-processing support"
-	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
@@ -545,7 +388,7 @@ config ARCH_SPARSEMEM_ENABLE
 config ALPHA_WTINT
 	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
 	default y if ALPHA_QEMU
-	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if ALPHA_EV56
 	default n if !ALPHA_SRM && !ALPHA_GENERIC
 	default y if SMP
 	help

arch/alpha/Makefile

@@ -15,18 +15,14 @@ CHECKFLAGS	+= -D__alpha__
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
-cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5
 cpuflags-$(CONFIG_ALPHA_EV56)		:= -mcpu=ev56
 cpuflags-$(CONFIG_ALPHA_POLARIS)	:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_SX164)		:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_EV6)		:= -mcpu=ev6
 cpuflags-$(CONFIG_ALPHA_EV67)		:= -mcpu=ev67
 # If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default.  Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev5
+# the host compiler might have on by default.
+cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev56 -mtune=ev6
 
 cflags-y				+= $(cpuflags-y)
 

arch/alpha/include/asm/core_apecs.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
-   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
-   that get passed through the PCI<->ISA bridge chip. So we've gotta use
-   both windows to max out the physical memory we can DMA to. Sigh...
-
-   If we try a window at 0 for 1GB as a work-around, we run into conflicts
-   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
-   BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
-   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
-   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
-   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
-   be used for that range (via virt_to_bus()).
-
-   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
-   to keep virt_to_bus() from returning an address in the first window, for
-   a data area that goes beyond the 64Mb first DMA window.  Sigh...
-   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
-   we can't just use that here, because of header file looping... :-(
-
-   Window 1 will be used for all DMA from the ISA bus; yes, that does
-   limit what memory an ISA floppy or sound card or Ethernet can touch, but
-   it's also a known limitation on other platforms as well. We use the
-   same technique that is used on INTEL platforms with similar limitation:
-   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
-   We trust that any ISA bus device drivers will *always* ask for DMAable
-   memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
-   Note that most PCI bus devices' drivers do *not* explicitly ask for
-   DMAable memory; they count on being able to DMA to any memory they
-   get from kmalloc()/get_free_pages(). They will also use window 1 for
-   any physical memory accesses below 64Mb; the rest will be handled by
-   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
-   We hope that the area before the first window is large enough so that
-   there will be no overlap at the top end (64Mb). We *must* locate the
-   PCI cards' memory just below window 1, so that there's still the
-   possibility of being able to access it via SPARSE space. This is
-   important for cards such as the Matrox Millennium, whose Xserver
-   wants to access memory-mapped registers in byte and short lengths.
-
-   Note that the XL is treated differently from the AVANTI, even though
-   for most other things they are identical. It didn't seem reasonable to
-   make the AVANTI support pay for the limitations of the XL. It is true,
-   however, that an XL kernel will run on an AVANTI without problems.
-
-   %%% All of this should be obviated by the ability to route
-   everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- *  configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD		0xf
-#define APECS_IOC_STAT0_ERR		(1<<4)
-#define APECS_IOC_STAT0_LOST		(1<<5)
-#define APECS_IOC_STAT0_THIT		(1<<6)
-#define APECS_IOC_STAT0_TREF		(1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT	8
-#define APECS_IOC_STAT0_CODE_MASK	0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT	13
-#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_base3;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long coma_cnfg3;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-
-	unsigned long pceb_vid;
-	unsigned long pceb_did;
-	unsigned long pceb_revision;
-	unsigned long pceb_command;
-	unsigned long pceb_status;
-	unsigned long pceb_latency;
-	unsigned long pceb_control;
-	unsigned long pceb_arbcon;
-	unsigned long pceb_arbpri;
-
-	unsigned long esc_id;
-	unsigned long esc_revision;
-	unsigned long esc_int0;
-	unsigned long esc_int1;
-	unsigned long esc_elcr0;
-	unsigned long esc_elcr1;
-	unsigned long esc_last_eisa;
-	unsigned long esc_nmi_stat;
-
-	unsigned long pci_ir;
-	unsigned long pci_imr;
-	unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines.  */
-struct el_apecs_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
-	unsigned long paltemp[32];  /* PAL TEMP REGS. */
-	/* EV4-specific fields */
-	unsigned long exc_addr;     /* Address of excepting instruction. */
-	unsigned long exc_sum;      /* Summary of arithmetic traps. */
-	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
-	unsigned long iccsr;        /* IBox hardware enables. */
-	unsigned long pal_base;     /* Base address for PALcode. */
-	unsigned long hier;         /* Hardware Interrupt Enable. */
-	unsigned long hirr;         /* Hardware Interrupt Request. */
-	unsigned long csr;          /* D-stream fault info. */
-	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
-	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
-	unsigned long abox_ctl;     /* ABox Control Register. */
-	unsigned long biu_stat;     /* BIU Status. */
-	unsigned long biu_addr;     /* BUI Address. */
-	unsigned long biu_ctl;      /* BIU Control. */
-	unsigned long fill_syndrome;/* For correcting ECC errors. */
-	unsigned long fill_addr;    /* Cache block which was being read */
-	unsigned long va;           /* Effective VA of fault or miss. */
-	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define APECS_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-__EXTERN_INLINE u8 apecs_ioread8(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 apecs_ioread16(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 apecs_ioread32(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 apecs_ioread64(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	return *(vulp)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite64(u64 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	*(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
-					    unsigned long size)
-{
-	return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		apecs
-#define apecs_trivial_io_bw	0
-#define apecs_trivial_io_lq	0
-#define apecs_trivial_rw_bw	2
-#define apecs_trivial_rw_lq	1
-#define apecs_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */

arch/alpha/include/asm/core_lca.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- *	Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- *	 PCI addresses that are beyond the first 27 bits of address
- *	 space.  Updating the HAE requires an external cycle (and
- *	 a memory barrier), which tends to be slow.  Instead of updating
- *	 it on each sparse memory access, we keep the current HAE value
- *	 cached in variable cache_hae.  Only if the cached HAE differs
- *	 from the desired HAE value do we actually updated HAE register.
- *	 The HAE register is preserved by the interrupt handler entry/exit
- *	 code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE.  The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like.  You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area.  Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD		0xf
-#define LCA_IOC_STAT0_ERR		(1<<4)
-#define LCA_IOC_STAT0_LOST		(1<<5)
-#define LCA_IOC_STAT0_THIT		(1<<6)
-#define LCA_IOC_STAT0_TREF		(1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT	8
-#define LCA_IOC_STAT0_CODE_MASK		0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT	13
-#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define LCA_HAE_ADDRESS		LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
-#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
-#define LCA_PMR_INTO    0x40                    /* Interrupt override */
-#define LCA_PMR_DMAO    0x80                    /* DMA override */
-#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1   0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2   0x2
-#define LCA_PMR_DIV_4   0x3
-#define LCA_PMR_DIV_8   0x4
-#define LCA_PMR_DIV_16  0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks.  Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
-	struct el_common	h;		/* common logout header */
-	unsigned long		esr;		/* error-status register */
-	unsigned long		ear;		/* error-address register */
-	unsigned long		dc_stat;	/* dcache status register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
-	struct el_common	h;		/* common logout header */
-	unsigned long		pt[31];		/* PAL temps */
-	unsigned long		exc_addr;	/* exception address */
-	unsigned long		pad1[3];
-	unsigned long		pal_base;	/* PALcode base address */
-	unsigned long		hier;		/* hw interrupt enable */
-	unsigned long		hirr;		/* hw interrupt request */
-	unsigned long		mm_csr;		/* MMU control & status */
-	unsigned long		dc_stat;	/* data cache status */
-	unsigned long		dc_addr;	/* data cache addr register */
-	unsigned long		abox_ctl;	/* address box control register */
-	unsigned long		esr;		/* error status register */
-	unsigned long		ear;		/* error address register */
-	unsigned long		car;		/* cache control register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-	unsigned long		va;		/* virtual address register */
-};
-
-union el_lca {
-	struct el_common *		c;
-	struct el_lca_mcheck_long *	l;
-	struct el_lca_mcheck_short *	s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define LCA_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-
-__EXTERN_INLINE u8 lca_ioread8(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u16 lca_ioread16(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE u32 lca_ioread32(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE u64 lca_ioread64(const void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	return *(vulp)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite64(u64 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	*(vulp)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
-					  unsigned long size)
-{
-	return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		lca
-#define lca_trivial_rw_bw	2
-#define lca_trivial_rw_lq	1
-#define lca_trivial_io_bw	0
-#define lca_trivial_io_lq	0
-#define lca_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */

arch/alpha/include/asm/core_t2.h

@@ -25,16 +25,8 @@
 #define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 27 bits */
 
 /* GAMMA-SABLE is a SABLE with EV5-based CPUs */
-/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
 #define _GAMMA_BIAS		0x8000000000UL
-
-#if defined(CONFIG_ALPHA_GENERIC)
-#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
-#elif defined(CONFIG_ALPHA_GAMMA)
 #define GAMMA_BIAS		_GAMMA_BIAS
-#else
-#define GAMMA_BIAS		0
-#endif
 
 /*
  * Memory spaces:

arch/alpha/include/asm/dma-mapping.h

@@ -6,11 +6,7 @@ extern const struct dma_map_ops alpha_pci_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(void)
 {
-#ifdef CONFIG_ALPHA_JENSEN
-	return NULL;
-#else
 	return &alpha_pci_ops;
-#endif
 }
 
 #endif	/* _ALPHA_DMA_MAPPING_H */

arch/alpha/include/asm/dma.h

@@ -82,11 +82,6 @@
   just a wiring limit.
 */
 
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
-   hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
-
 /* The maximum address for ISA DMA transfer on RUFFIAN,
    due to an hardware SIO limitation, is 16MB.
 */
@@ -107,9 +102,7 @@
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
 #else
-# if defined(CONFIG_ALPHA_XL)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
 # elif defined(CONFIG_ALPHA_SABLE)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS

arch/alpha/include/asm/elf.h

@@ -133,9 +133,7 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 #define ELF_PLATFORM				\
 ({						\
 	enum implver_enum i_ = implver();	\
-	( i_ == IMPLVER_EV4 ? "ev4"		\
-	: i_ == IMPLVER_EV5			\
-	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
+	( i_ == IMPLVER_EV5 ? "ev56"			\
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 

arch/alpha/include/asm/io.h

@@ -203,16 +203,10 @@ static inline int generic_is_mmio(const volatile void __iomem *a)
 
 #else
 
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
+#if defined(CONFIG_ALPHA_CIA)
 # include <asm/core_cia.h>
 #elif defined(CONFIG_ALPHA_IRONGATE)
 # include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_JENSEN)
-# include <asm/jensen.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
 #elif defined(CONFIG_ALPHA_MARVEL)
 # include <asm/core_marvel.h>
 #elif defined(CONFIG_ALPHA_MCPCIA)
@@ -631,23 +625,7 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
 #define outsw outsw
 #define outsl outsl
 
-/*
- * The Alpha Jensen hardware for some rather strange reason puts
- * the RTC clock at 0x170 instead of 0x70. Probably due to some
- * misguided idea about using 0x70 for NMI stuff.
- *
- * These defines will override the defaults when doing RTC queries
- */
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define RTC_PORT(x)	((x) + alpha_mv.rtc_port)
-#else
-# ifdef CONFIG_ALPHA_JENSEN
-#  define RTC_PORT(x)	(0x170+(x))
-# else
-#  define RTC_PORT(x)	(0x70 + (x))
-# endif
-#endif
+#define RTC_PORT(x)	(0x70 + (x))
 #define RTC_ALWAYS_BCD	0
 
 /*

arch/alpha/include/asm/irq.h

@@ -31,16 +31,11 @@
 #  define NR_IRQS      (32768 + 16)    /* marvel - 32 pids */
 # endif
 
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
-      defined(CONFIG_ALPHA_EB66P)     || \
-      defined(CONFIG_ALPHA_EB164)     || \
-      defined(CONFIG_ALPHA_PC164)     || \
+#elif defined(CONFIG_ALPHA_PC164)     || \
       defined(CONFIG_ALPHA_LX164)
 # define NR_IRQS	35
 
-#elif defined(CONFIG_ALPHA_EB66)      || \
-      defined(CONFIG_ALPHA_EB64P)     || \
-      defined(CONFIG_ALPHA_MIKASA)
+#elif defined(CONFIG_ALPHA_MIKASA)
 # define NR_IRQS	32
 
 #elif defined(CONFIG_ALPHA_ALCOR)     || \
@@ -55,7 +50,6 @@
 # define NR_IRQS	40
 
 #elif defined(CONFIG_ALPHA_DP264) || \
-      defined(CONFIG_ALPHA_LYNX)  || \
       defined(CONFIG_ALPHA_SHARK)
 # define NR_IRQS	64
 

arch/alpha/include/asm/jensen.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_JENSEN_H
-#define __ALPHA_JENSEN_H
-
-#include <asm/compiler.h>
-
-/*
- * Defines for the AlphaPC EISA IO and memory address space.
- */
-
-/*
- * NOTE! The memory operations do not set any memory barriers, as it's
- * not needed for cases like a frame buffer that is essentially memory-like.
- * You need to do them by hand if the operations depend on ordering.
- *
- * Similarly, the port IO operations do a "mb" only after a write operation:
- * if an mb is needed before (as in the case of doing memory mapped IO
- * first, and then a port IO operation to the same device), it needs to be
- * done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do the
- * mb all the time, but right now I'm hoping this will work out.  Avoiding
- * mb's may potentially be a noticeable speed improvement, but I can't
- * honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to non-interrupts
- * is another fun race area.  Don't do it (because if you do, I'll have to
- * do *everything* with interrupts disabled, ugh).
- */
-
-/*
- * EISA Interrupt Acknowledge address
- */
-#define EISA_INTA		(IDENT_ADDR + 0x100000000UL)
-
-/*
- * FEPROM addresses
- */
-#define EISA_FEPROM0		(IDENT_ADDR + 0x180000000UL)
-#define EISA_FEPROM1		(IDENT_ADDR + 0x1A0000000UL)
-
-/*
- * VL82C106 base address
- */
-#define EISA_VL82C106		(IDENT_ADDR + 0x1C0000000UL)
-
-/*
- * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
- */
-#define EISA_HAE		(IDENT_ADDR + 0x1D0000000UL)
-
-/*
- * "SYSCTL" register address
- */
-#define EISA_SYSCTL		(IDENT_ADDR + 0x1E0000000UL)
-
-/*
- * "spare" register address
- */
-#define EISA_SPARE		(IDENT_ADDR + 0x1F0000000UL)
-
-/*
- * EISA memory address offset
- */
-#define EISA_MEM		(IDENT_ADDR + 0x200000000UL)
-
-/*
- * EISA IO address offset
- */
-#define EISA_IO			(IDENT_ADDR + 0x300000000UL)
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Handle the "host address register". This needs to be set
- * to the high 7 bits of the EISA address.  This is also needed
- * for EISA IO addresses, which are only 16 bits wide (the
- * hae needs to be set to 0).
- *
- * HAE isn't needed for the local IO operations, though.
- */
-
-#define JENSEN_HAE_ADDRESS	EISA_HAE
-#define JENSEN_HAE_MASK		0x1ffffff
-
-__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
-{
-	/* hae on the Jensen is bits 31:25 shifted right */
-	addr >>= 25;
-	if (addr != alpha_mv.hae_cache)
-		set_hae(addr);
-}
-
-#define vuip	volatile unsigned int *
-#define vulp	volatile unsigned long *
-
-/*
- * IO functions
- *
- * The "local" functions are those that don't go out to the EISA bus,
- * but instead act on the VL82C106 chip directly.. This is mainly the
- * keyboard, RTC,  printer and first two serial lines..
- *
- * The local stuff makes for some complications, but it seems to be
- * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
- * convinced that I need one of the newer machines.
- */
-
-__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr)
-{
-	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
-}
-
-__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr)
-{
-	*(vuip)((addr << 9) + EISA_VL82C106) = b;
-	mb();
-}
-
-__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
-	mb();
-}
-
-/*
- * It seems gcc is not very good at optimizing away logical
- * operations that result in operations across inline functions.
- * Which is why this is a macro.
- */
-
-#define jensen_is_local(addr) ( \
-/* keyboard */	(addr == 0x60 || addr == 0x64) || \
-/* RTC */	(addr == 0x170 || addr == 0x171) || \
-/* mb COM2 */	(addr >= 0x2f8 && addr <= 0x2ff) || \
-/* mb LPT1 */	(addr >= 0x3bc && addr <= 0x3be) || \
-/* mb COM2 */	(addr >= 0x3f8 && addr <= 0x3ff))
-
-__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		return jensen_local_inb(addr);
-	else
-		return jensen_bus_inb(addr);
-}
-
-__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		jensen_local_outb(b, addr);
-	else
-		jensen_bus_outb(b, addr);
-}
-
-__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
-{
-	jensen_set_hae(0);
-	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_inq(unsigned long addr)
-{
-	jensen_set_hae(0);
-	return *(vulp) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
-	mb();
-}
-
-__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
-	mb();
-}
-
-__EXTERN_INLINE void jensen_outq(u64 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vulp) ((addr << 7) + EISA_IO + 0x60) = b;
-	mb();
-}
-
-/*
- * Memory functions.
- */
-
-__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
-	result >>= (addr & 3) * 8;
-	return 0xffUL & result;
-}
-
-__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long r0, r1;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	r0 = *(vuip) (addr);
-	r1 = *(vuip) (addr + (4 << 7));
-	return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
-}
-
-__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
-}
-
-__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
-}
-
-__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	*(vuip) (addr) = b;
-	*(vuip) (addr + (4 << 7)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
-					     unsigned long size)
-{
-	return (void __iomem *)(addr + 0x100000000ul);
-}
-
-__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
-{
-	return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= 0x100000000ul;
-}
-
-/* New-style ioread interface.  All the routines are so ugly for Jensen
-   that it doesn't make sense to merge them.  */
-
-#define IOPORT(OS, NS)							\
-__EXTERN_INLINE u##NS jensen_ioread##NS(const void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		return jensen_read##OS(xaddr - 0x100000000ul);		\
-	else								\
-		return jensen_in##OS((unsigned long)xaddr);		\
-}									\
-__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		jensen_write##OS(b, xaddr - 0x100000000ul);		\
-	else								\
-		jensen_out##OS(b, (unsigned long)xaddr);		\
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-IOPORT(q, 64)
-
-#undef IOPORT
-
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		jensen
-#define jensen_trivial_rw_bw	0
-#define jensen_trivial_rw_lq	0
-#define jensen_trivial_io_bw	0
-#define jensen_trivial_io_lq	0
-#define jensen_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_JENSEN_H */

arch/alpha/include/asm/machvec.h

@@ -72,15 +72,6 @@ struct alpha_machine_vector
 	int (*mv_is_ioaddr)(unsigned long);
 	int (*mv_is_mmio)(const volatile void __iomem *);
 
-	void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
-			     struct task_struct *);
-	void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
-
-	void (*mv_flush_tlb_current)(struct mm_struct *);
-	void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
-					  struct vm_area_struct *vma,
-					  unsigned long addr);
-
 	void (*update_irq_hw)(unsigned long, unsigned long, int);
 	void (*ack_irq)(unsigned long);
 	void (*device_interrupt)(unsigned long vector);

arch/alpha/include/asm/mmu_context.h

@@ -71,9 +71,7 @@ __reload_thread(struct pcb_struct *pcb)
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ASN	(alpha_mv.max_asn)
 #else
-# ifdef CONFIG_ALPHA_EV4
-#  define MAX_ASN	EV4_MAX_ASN
-# elif defined(CONFIG_ALPHA_EV5)
+# if defined(CONFIG_ALPHA_EV56)
 #  define MAX_ASN	EV5_MAX_ASN
 # else
 #  define MAX_ASN	EV6_MAX_ASN
@@ -162,26 +160,6 @@ ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
 	task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
 }
 
-__EXTERN_INLINE void
-ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-	      struct task_struct *next)
-{
-	/* As described, ASN's are broken for TLB usage.  But we can
-	   optimize for switching between threads -- if the mm is
-	   unchanged from current we needn't flush.  */
-	/* ??? May not be needed because EV4 PALcode recognizes that
-	   ASN's are broken and does a tbiap itself on swpctx, under
-	   the "Must set ASN or flush" rule.  At least this is true
-	   for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
-	   I'm going to leave this here anyway, just to Be Sure.  -- r~  */
-	if (prev_mm != next_mm)
-		tbiap();
-
-	/* Do continue to allocate ASNs, because we can still use them
-	   to avoid flushing the icache.  */
-	ev5_switch_mm(prev_mm, next_mm, next);
-}
-
 extern void __load_new_mm_context(struct mm_struct *);
 asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
 			      long cause, struct pt_regs *regs);
@@ -209,25 +187,8 @@ ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
 	__load_new_mm_context(next_mm);
 }
 
-__EXTERN_INLINE void
-ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-	__load_new_mm_context(next_mm);
-	tbiap();
-}
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define switch_mm(a,b,c)	alpha_mv.mv_switch_mm((a),(b),(c))
-# define activate_mm(x,y)	alpha_mv.mv_activate_mm((x),(y))
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define switch_mm(a,b,c)	ev4_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev4_activate_mm((x),(y))
-# else
-#  define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev5_activate_mm((x),(y))
-# endif
-#endif
+#define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
+#define activate_mm(x,y)	ev5_activate_mm((x),(y))
 
 #define init_new_context init_new_context
 static inline int

arch/alpha/include/asm/special_insns.h

@@ -15,10 +15,7 @@ enum implver_enum {
    (enum implver_enum) __implver; })
 #else
 /* Try to eliminate some dead code.  */
-#ifdef CONFIG_ALPHA_EV4
-#define implver() IMPLVER_EV4
-#endif
-#ifdef CONFIG_ALPHA_EV5
+#ifdef CONFIG_ALPHA_EV56
 #define implver() IMPLVER_EV5
 #endif
 #if defined(CONFIG_ALPHA_EV6)

arch/alpha/include/asm/tlbflush.h

@@ -14,16 +14,6 @@
 extern void __load_new_mm_context(struct mm_struct *);
 
 
-/* Use a few helper functions to hide the ugly broken ASN
-   numbers on early Alphas (ev4 and ev45).  */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current(struct mm_struct *mm)
-{
-	__load_new_mm_context(mm);
-	tbiap();
-}
-
 __EXTERN_INLINE void
 ev5_flush_tlb_current(struct mm_struct *mm)
 {
@@ -34,19 +24,6 @@ ev5_flush_tlb_current(struct mm_struct *mm)
    careful about the icache here, there is no way to invalidate a
    specific icache page.  */
 
-__EXTERN_INLINE void
-ev4_flush_tlb_current_page(struct mm_struct * mm,
-			   struct vm_area_struct *vma,
-			   unsigned long addr)
-{
-	int tbi_flag = 2;
-	if (vma->vm_flags & VM_EXEC) {
-		__load_new_mm_context(mm);
-		tbi_flag = 3;
-	}
-	tbi(tbi_flag, addr);
-}
-
 __EXTERN_INLINE void
 ev5_flush_tlb_current_page(struct mm_struct * mm,
 			   struct vm_area_struct *vma,
@@ -59,18 +36,8 @@ ev5_flush_tlb_current_page(struct mm_struct * mm,
 }
 
 
-#ifdef CONFIG_ALPHA_GENERIC
-# define flush_tlb_current		alpha_mv.mv_flush_tlb_current
-# define flush_tlb_current_page		alpha_mv.mv_flush_tlb_current_page
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define flush_tlb_current		ev4_flush_tlb_current
-#  define flush_tlb_current_page	ev4_flush_tlb_current_page
-# else
-#  define flush_tlb_current		ev5_flush_tlb_current
-#  define flush_tlb_current_page	ev5_flush_tlb_current_page
-# endif
-#endif
+#define flush_tlb_current	ev5_flush_tlb_current
+#define flush_tlb_current_page	ev5_flush_tlb_current_page
 
 #ifdef __MMU_EXTERN_INLINE
 #undef __EXTERN_INLINE

arch/alpha/include/asm/uaccess.h

@@ -96,9 +96,6 @@ struct __large_struct { unsigned long buf[100]; };
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __get_user_16(addr)				\
 	__asm__("1: ldwu %0,%2\n"			\
 	"2:\n"						\
@@ -112,33 +109,6 @@ struct __large_struct { unsigned long buf[100]; };
 	EXC(1b,2b,%0,%1)				\
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   load, so we have to do a general unaligned operation.  */
-
-#define __get_user_16(addr)						\
-{									\
-	long __gu_tmp;							\
-	__asm__("1: ldq_u %0,0(%3)\n"					\
-	"2:	ldq_u %1,1(%3)\n"					\
-	"	extwl %0,%3,%0\n"					\
-	"	extwh %1,%3,%1\n"					\
-	"	or %0,%1,%0\n"						\
-	"3:\n"								\
-	EXC(1b,3b,%0,%2)						\
-	EXC(2b,3b,%0,%2)						\
-		: "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err)	\
-		: "r"(addr), "2"(__gu_err));				\
-}
-
-#define __get_user_8(addr)						\
-	__asm__("1: ldq_u %0,0(%2)\n"					\
-	"	extbl %0,%2,%0\n"					\
-	"2:\n"								\
-	EXC(1b,2b,%0,%1)						\
-		: "=&r"(__gu_val), "=r"(__gu_err)			\
-		: "r"(addr), "1"(__gu_err))
-#endif
 
 extern void __put_user_unknown(void);
 
@@ -192,9 +162,6 @@ __asm__ __volatile__("1: stl %r2,%1\n"				\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __put_user_16(x, addr)					\
 __asm__ __volatile__("1: stw %r2,%1\n"				\
 	"2:\n"							\
@@ -208,53 +175,6 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
 	EXC(1b,2b,$31,%0)					\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   write, so we have to do a general unaligned operation.  */
-
-#define __put_user_16(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %2,1(%5)\n"				\
-	"2:	ldq_u %1,0(%5)\n"				\
-	"	inswh %6,%5,%4\n"				\
-	"	inswl %6,%5,%3\n"				\
-	"	mskwh %2,%5,%2\n"				\
-	"	mskwl %1,%5,%1\n"				\
-	"	or %2,%4,%2\n"					\
-	"	or %1,%3,%1\n"					\
-	"3:	stq_u %2,1(%5)\n"				\
-	"4:	stq_u %1,0(%5)\n"				\
-	"5:\n"							\
-	EXC(1b,5b,$31,%0)					\
-	EXC(2b,5b,$31,%0)					\
-	EXC(3b,5b,$31,%0)					\
-	EXC(4b,5b,$31,%0)					\
-		: "=r"(__pu_err), "=&r"(__pu_tmp1), 		\
-		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), 		\
-		  "=&r"(__pu_tmp4)				\
-		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
-}
-
-#define __put_user_8(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2;				\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %1,0(%4)\n"				\
-	"	insbl %3,%4,%2\n"				\
-	"	mskbl %1,%4,%1\n"				\
-	"	or %1,%2,%1\n"					\
-	"2:	stq_u %1,0(%4)\n"				\
-	"3:\n"							\
-	EXC(1b,3b,$31,%0)					\
-	EXC(2b,3b,$31,%0)					\
-		: "=r"(__pu_err), 				\
-	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
-		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
-}
-#endif
-
 
 /*
  * Complex access routines

arch/alpha/include/asm/vga.h

@@ -13,6 +13,7 @@
 #define VT_BUF_HAVE_RW
 #define VT_BUF_HAVE_MEMSETW
 #define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
 
 static inline void scr_writew(u16 val, volatile u16 *addr)
 {
@@ -40,6 +41,7 @@ static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
 
 /* Do not trust that the usage will be correct; analyze the arguments.  */
 extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
+extern void scr_memmovew(u16 *d, const u16 *s, unsigned int count);
 
 /* ??? These are currently only used for downloading character sets.  As
    such, they don't need memory barriers.  Is this all they are intended

arch/alpha/include/uapi/asm/compiler.h

@@ -95,24 +95,6 @@
 #define __kernel_ldwu(mem)	(mem)
 #define __kernel_stb(val,mem)	((mem) = (val))
 #define __kernel_stw(val,mem)	((mem) = (val))
-#else
-#define __kernel_ldbu(mem)				\
-  ({ unsigned char __kir;				\
-     __asm__(".arch ev56;				\
-	      ldbu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_ldwu(mem)				\
-  ({ unsigned short __kir;				\
-     __asm__(".arch ev56;				\
-	      ldwu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_stb(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stw %1,%0" : "=m"(mem) : "r"(val))
 #endif
 
-
 #endif /* _UAPI__ALPHA_COMPILER_H */

arch/alpha/kernel/Makefile

@@ -22,14 +22,14 @@ obj-$(CONFIG_AUDIT)	+= audit.o
 
 ifdef CONFIG_ALPHA_GENERIC
 
-obj-y 	 += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+obj-y 	 += core_cia.o core_irongate.o \
 	    core_mcpcia.o core_polaris.o core_t2.o \
 	    core_tsunami.o
 
-obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
-	    sys_jensen.o sys_miata.o sys_mikasa.o sys_nautilus.o \
+obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eiger.o \
+	    sys_miata.o sys_mikasa.o sys_nautilus.o \
 	    sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
-	    sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+	    sys_sable.o sys_sx164.o sys_takara.o
 
 ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
 obj-y	 += core_marvel.o core_titan.o core_wildfire.o
@@ -48,10 +48,8 @@ else
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
 # Core logic support
-obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
 obj-$(CONFIG_ALPHA_IRONGATE)	+= core_irongate.o
-obj-$(CONFIG_ALPHA_LCA)		+= core_lca.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= core_marvel.o gct.o
 obj-$(CONFIG_ALPHA_MCPCIA)	+= core_mcpcia.o
 obj-$(CONFIG_ALPHA_POLARIS)	+= core_polaris.o
@@ -62,12 +60,6 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -75,10 +67,7 @@ obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 obj-$(CONFIG_ALPHA_DP264)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_SHARK)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_TITAN)	+= sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P)	+= sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66)	+= sys_eb64p.o irq_i8259.o
 obj-$(CONFIG_ALPHA_EIGER)	+= sys_eiger.o irq_i8259.o
-obj-$(CONFIG_ALPHA_JENSEN)	+= sys_jensen.o pci-noop.o irq_i8259.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= sys_marvel.o 
 obj-$(CONFIG_ALPHA_MIATA)	+= sys_miata.o irq_pyxis.o irq_i8259.o \
 				   es1888.o smc37c669.o
@@ -89,12 +78,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE)	+= sys_rawhide.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
 obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o

arch/alpha/kernel/asm-offsets.c

@@ -10,35 +10,16 @@
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/kbuild.h>
-#include <asm/io.h>
+#include <asm/machvec.h>
 
 static void __used foo(void)
 {
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 	DEFINE(TI_FP, offsetof(struct thread_info, fp));
 	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
-        DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-        DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
-        DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
-        DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
-        DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
-        BLANK();
-
-        DEFINE(CRED_UID,  offsetof(struct cred, uid));
-        DEFINE(CRED_EUID, offsetof(struct cred, euid));
-        DEFINE(CRED_GID,  offsetof(struct cred, gid));
-        DEFINE(CRED_EGID, offsetof(struct cred, egid));
-        BLANK();
-
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(SIGCHLD, SIGCHLD);
 	BLANK();
 
 	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));

arch/alpha/kernel/bugs.c

 
 #include <asm/hwrpb.h>
 #include <linux/device.h>
+#include <linux/cpu.h>
 
 
 #ifdef CONFIG_SYSFS

arch/alpha/kernel/console.c

@@ -15,6 +15,7 @@
 #include <asm/machvec.h>
 
 #include "pci_impl.h"
+#include "proto.h"
 
 #ifdef CONFIG_VGA_HOSE
 

arch/alpha/kernel/core_apecs.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args)	printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip	volatile unsigned int  *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
-	      " pci_addr=0x%p, type1=0x%p)\n",
-	      bus, device_fn, where, pci_addr, type1));
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-
-		/* type 0 configuration cycle: */
-
-		if (device > 20) {
-			DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
-			      device));
-			return -1;
-		}
-
-		*type1 = 0;
-		addr = (device_fn << 8) | (where);
-	} else {
-		/* type 1 configuration cycle: */
-		*type1 = 1;
-		addr = (bus << 16) | (device_fn << 8) | (where);
-	}
-	*pci_addr = addr;
-	DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0, value;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-	DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-		DBGC(("conf_read: TYPE1 access\n"));
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-
-	/* Access configuration space.  */
-
-	/* Some SRMs step on these registers during a machine check.  */
-	asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
-		     : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
-	if (mcheck_taken(0)) {
-		mcheck_taken(0) = 0;
-		value = 0xffffffffU;
-		mb();
-	}
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_read: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-		value = 0xffffffff;
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	mb();
-	mb();  /* magic */
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_write: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		  int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	shift = (where & 3) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	*value = conf_read(addr, type1) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	conf_write(addr, value << ((where & 3) * 8), type1);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops = 
-{
-	.read =		apecs_read_config,
-	.write =	apecs_write_config,
-};
-
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vip)APECS_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-apecs_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = APECS_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Window 1 is direct access 1GB at 1GB
-	 * Window 2 is scatter-gather 8MB at 8MB (for isa)
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
-	*(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
-	*(vuip)APECS_IOC_TB1R = 0;
-
-	*(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
-	*(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
-	apecs_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Finally, clear the HAXR2 register, which gets used
-	 * for PCI Config Space accesses. That is the way
-	 * we want to use it, and we do not want to depend on
-	 * what ARC or SRM might have left behind...
-	 */
-	*(vuip)APECS_IOC_HAXR2 = 0;
-	mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
-	unsigned int jd;
-
-	jd = *(vuip)APECS_IOC_DCSR;
-	if (jd & 0xffe0L) {
-		*(vuip)APECS_IOC_SEAR;
-		*(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
-		mb();
-		*(vuip)APECS_IOC_DCSR;
-	}
-	*(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
-	mb();
-	*(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header;
-	struct el_apecs_procdata *mchk_procdata;
-	struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	mchk_procdata = (struct el_apecs_procdata *)
-		(la_ptr + mchk_header->proc_offset
-		 - sizeof(mchk_procdata->paltemp));
-
-	mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
-		(la_ptr + mchk_header->sys_offset);
-
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);		/* reset machine check pending flag */
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "APECS",
-			    (mcheck_expected(0)
-			     && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}

arch/alpha/kernel/core_cia.c

@@ -280,7 +280,7 @@ cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
 #define CIA_BROKEN_TBIA_SIZE	1024
 
 /* Always called with interrupts disabled */
-void
+static void
 cia_pci_tbi_try2(struct pci_controller *hose,
 		 dma_addr_t start, dma_addr_t end)
 {
@@ -576,7 +576,7 @@ struct
     } window[4];
 } saved_config __attribute((common));
 
-void
+static void
 cia_save_srm_settings(int is_pyxis)
 {
 	int i;
@@ -602,7 +602,7 @@ cia_save_srm_settings(int is_pyxis)
 	mb();
 }
 
-void
+static void
 cia_restore_srm_settings(void)
 {
 	int i;

arch/alpha/kernel/core_irongate.c

@@ -226,7 +226,6 @@ albacore_init_arch(void)
 	if (memtop > pci_mem) {
 #ifdef CONFIG_BLK_DEV_INITRD
 		extern unsigned long initrd_start, initrd_end;
-		extern void *move_initrd(unsigned long);
 
 		/* Move the initrd out of the way. */
 		if (initrd_end && __pa(initrd_end) > pci_mem) {

arch/alpha/kernel/core_lca.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons.  Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR		0x0080
-#define MCHK_K_TCPERR		0x0082
-#define MCHK_K_HERR		0x0084
-#define MCHK_K_ECC_C		0x0086
-#define MCHK_K_ECC_NC		0x0088
-#define MCHK_K_UNKNOWN		0x008A
-#define MCHK_K_CACKSOFT		0x008C
-#define MCHK_K_BUGCHECK		0x008E
-#define MCHK_K_OS_BUGCHECK	0x0090
-#define MCHK_K_DCPERR		0x0092
-#define MCHK_K_ICPERR		0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR		0x204	/* all platforms so far */
-#define MCHK_K_SIO_IOCHK	0x206	/* all platforms so far */
-#define MCHK_K_DCSR		0x208	/* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-		int func = device_fn & 0x7;
-
-		/* Type 0 configuration cycle.  */
-
-		if (device > 12) {
-			return -1;
-		}
-
-		*(vulp)LCA_IOC_CONF = 0;
-		addr = (1 << (11 + device)) | (func << 8) | where;
-	} else {
-		/* Type 1 configuration cycle.  */
-		*(vulp)LCA_IOC_CONF = 1;
-		addr = (bus << 16) | (device_fn << 8) | where;
-	}
-	*pci_addr = addr;
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
-	unsigned long flags, code, stat0;
-	unsigned int value;
-
-	local_irq_save(flags);
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	value = *(vuip)addr;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_read: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check.  */
-		wrmces(0x7);
-
-		value = 0xffffffff;
-	}
-	local_irq_restore(flags);
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
-	unsigned long flags, code, stat0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_write: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check. */
-		wrmces(0x7);
-	}
-	local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = (where & 3) * 8;
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	*value = conf_read(addr) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		 u32 value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	conf_write(addr, value << ((where & 3) * 8));
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops = 
-{
-	.read =		lca_read_config,
-	.write =	lca_write_config,
-};
-
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vulp)LCA_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-lca_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = LCA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Mimic the SRM settings for the direct-map window.
-	 *   Window 0 is scatter-gather 8MB at 8MB (for isa).
-	 *   Window 1 is direct access 1GB at 1GB.
-	 *
-	 * Note that we do not try to save any of the DMA window CSRs
-	 * before setting them, since we cannot read those CSRs on LCA.
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
-	*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
-	*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
-	*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE1 = 0;
-
-	*(vulp)LCA_IOC_TB_ENA = 0x80;
-
-	lca_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Disable PCI parity for now.  The NCR53c810 chip has
-	 * troubles meeting the PCI spec which results in
-	 * data parity errors.
-	 */
-	*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
-	/*
-	 * Finally, set up for restoring the correct HAE if using SRM.
-	 * Again, since we cannot read many of the CSRs on the LCA,
-	 * one of which happens to be the HAE, we save the value that
-	 * the SRM will expect...
-	 */
-	if (alpha_using_srm)
-		srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling.  I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV		(1UL<< 0)	/* error address valid */
-#define ESR_CEE		(1UL<< 1)	/* correctable error */
-#define ESR_UEE		(1UL<< 2)	/* uncorrectable error */
-#define ESR_WRE		(1UL<< 3)	/* write-error */
-#define ESR_SOR		(1UL<< 4)	/* error source */
-#define ESR_CTE		(1UL<< 7)	/* cache-tag error */
-#define ESR_MSE		(1UL<< 9)	/* multiple soft errors */
-#define ESR_MHE		(1UL<<10)	/* multiple hard errors */
-#define ESR_NXM		(1UL<<12)	/* non-existent memory */
-
-#define IOC_ERR		(  1<<4)	/* ioc logs an error */
-#define IOC_CMD_SHIFT	0
-#define IOC_CMD		(0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT	8
-#define IOC_CODE	(0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST	(  1<<5)
-#define IOC_P_NBR	((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
-	printk("    %s %s error to %s occurred at address %x\n",
-	       ((esr & ESR_CEE) ? "Correctable" :
-		(esr & ESR_UEE) ? "Uncorrectable" : "A"),
-	       (esr & ESR_WRE) ? "write" : "read",
-	       (esr & ESR_SOR) ? "memory" : "b-cache",
-	       (unsigned) (ear & 0x1ffffff8));
-	if (esr & ESR_CTE) {
-		printk("    A b-cache tag parity error was detected.\n");
-	}
-	if (esr & ESR_MSE) {
-		printk("    Several other correctable errors occurred.\n");
-	}
-	if (esr & ESR_MHE) {
-		printk("    Several other uncorrectable errors occurred.\n");
-	}
-	if (esr & ESR_NXM) {
-		printk("    Attempted to access non-existent memory.\n");
-	}
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
-	static const char * const pci_cmd[] = {
-		"Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
-		"Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
-		"Rsvd4", "Configuration Read", "Configuration Write",
-		"Memory Read Multiple", "Dual Address", "Memory Read Line",
-		"Memory Write and Invalidate"
-	};
-	static const char * const err_name[] = {
-		"exceeded retry limit", "no device", "bad data parity",
-		"target abort", "bad address parity", "page table read error",
-		"invalid page", "data error"
-	};
-	unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
-	unsigned cmd  = (stat0 & IOC_CMD)  >> IOC_CMD_SHIFT;
-
-	printk("    %s initiated PCI %s cycle to address %x"
-	       " failed due to %s.\n",
-	       code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
-	if (code == 5 || code == 6) {
-		printk("    (Error occurred at PCI memory address %x.)\n",
-		       (stat0 & ~IOC_P_NBR));
-	}
-	if (stat0 & IOC_LOST) {
-		printk("    Other PCI errors occurred simultaneously.\n");
-	}
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	const char * reason;
-	union el_lca el;
-
-	el.c = (struct el_common *) la_ptr;
-
-	wrmces(rdmces());	/* reset machine check pending flag */
-
-	printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
-	       vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
-	/*
-	 * The first quadword after the common header always seems to
-	 * be the machine check reason---don't know why this isn't
-	 * part of the common header instead.  In the case of a long
-	 * logout frame, the upper 32 bits is the machine check
-	 * revision level, which we ignore for now.
-	 */
-	switch ((unsigned int) el.c->code) {
-	case MCHK_K_TPERR:	reason = "tag parity error"; break;
-	case MCHK_K_TCPERR:	reason = "tag control parity error"; break;
-	case MCHK_K_HERR:	reason = "access to non-existent memory"; break;
-	case MCHK_K_ECC_C:	reason = "correctable ECC error"; break;
-	case MCHK_K_ECC_NC:	reason = "non-correctable ECC error"; break;
-	case MCHK_K_CACKSOFT:	reason = "MCHK_K_CACKSOFT"; break;
-	case MCHK_K_BUGCHECK:	reason = "illegal exception in PAL mode"; break;
-	case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
-	case MCHK_K_DCPERR:	reason = "d-cache parity error"; break;
-	case MCHK_K_ICPERR:	reason = "i-cache parity error"; break;
-	case MCHK_K_SIO_SERR:	reason = "SIO SERR occurred on PCI bus"; break;
-	case MCHK_K_SIO_IOCHK:	reason = "SIO IOCHK occurred on ISA bus"; break;
-	case MCHK_K_DCSR:	reason = "MCHK_K_DCSR"; break;
-	case MCHK_K_UNKNOWN:
-	default:		reason = "unknown"; break;
-	}
-
-	switch (el.c->size) {
-	case sizeof(struct el_lca_mcheck_short):
-		printk(KERN_CRIT
-		       "  Reason: %s (short frame%s, dc_stat=%#lx):\n",
-		       reason, el.c->retry ? ", retryable" : "",
-		       el.s->dc_stat);
-		if (el.s->esr & ESR_EAV) {
-			mem_error(el.s->esr, el.s->ear);
-		}
-		if (el.s->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
-		}
-		break;
-
-	case sizeof(struct el_lca_mcheck_long):
-		printk(KERN_CRIT "  Reason: %s (long frame%s):\n",
-		       reason, el.c->retry ? ", retryable" : "");
-		printk(KERN_CRIT
-		       "    reason: %#lx  exc_addr: %#lx  dc_stat: %#lx\n", 
-		       el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
-		printk(KERN_CRIT "    car: %#lx\n", el.l->car);
-		if (el.l->esr & ESR_EAV) {
-			mem_error(el.l->esr, el.l->ear);
-		}
-		if (el.l->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
-		}
-		break;
-
-	default:
-		printk(KERN_CRIT "  Unknown errorlog size %d\n", el.c->size);
-	}
-
-	/* Dump the logout area to give all info.  */
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		unsigned long * ptr = (unsigned long *) la_ptr;
-		long i;
-		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
-			printk(KERN_CRIT " +%8lx %016lx %016lx\n",
-			       i*sizeof(long), ptr[i], ptr[i+1]);
-		}
-	}
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
-
-/*
- * The following routines are needed to support the SPEED changing
- * necessary to successfully manage the thermal problem on the AlphaBook1.
- */
-
-void
-lca_clock_print(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-
-        printk("Status of clock control:\n");
-        printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
-        printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
-        printk("\tInterrupt override is %s\n",
-	       (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); 
-        printk("\tDMA override is %s\n",
-	       (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); 
-
-}
-
-int
-lca_get_clock(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        return(LCA_GET_PRIMARY(pmr_reg));
-
-}
-
-void
-lca_clock_fiddle(int divisor)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
-	/* lca_norm_clock = divisor; */
-        LCA_WRITE_PMR(pmr_reg);
-        mb();
-}

arch/alpha/kernel/core_marvel.c

@@ -355,7 +355,7 @@ marvel_init_io7(struct io7 *io7)
 	}
 }
 
-void __init
+static void __init
 marvel_io7_present(gct6_node *node)
 {
 	int pe;

arch/alpha/kernel/core_t2.c

@@ -10,7 +10,7 @@
  * Code common to all T2 core logic chips.
  */
 
-#define __EXTERN_INLINE
+#define __EXTERN_INLINE inline
 #include <asm/io.h>
 #include <asm/core_t2.h>
 #undef __EXTERN_INLINE

arch/alpha/kernel/core_wildfire.c

@@ -59,7 +59,7 @@ unsigned long wildfire_pca_mask;
 unsigned long wildfire_cpu_mask;
 unsigned long wildfire_mem_mask;
 
-void __init
+static void __init
 wildfire_init_hose(int qbbno, int hoseno)
 {
 	struct pci_controller *hose;
@@ -137,7 +137,7 @@ wildfire_init_hose(int qbbno, int hoseno)
 	wildfire_pci_tbi(hose, 0, 0); /* Flush TLB at the end. */
 }
 
-void __init
+static void __init
 wildfire_init_pca(int qbbno, int pcano)
 {
 
@@ -154,7 +154,7 @@ wildfire_init_pca(int qbbno, int pcano)
 	wildfire_init_hose(qbbno, (pcano << 1) + 1);
 }
 
-void __init
+static void __init
 wildfire_init_qbb(int qbbno)
 {
 	int pcano;
@@ -176,7 +176,7 @@ wildfire_init_qbb(int qbbno)
 	}
 }
 
-void __init
+static void __init
 wildfire_hardware_probe(void)
 {
 	unsigned long temp;

arch/alpha/kernel/entry.S

@@ -811,6 +811,7 @@ alpha_\name:
 fork_like fork
 fork_like vfork
 fork_like clone
+fork_like clone3
 
 .macro	sigreturn_like name
 	.align	4

arch/alpha/kernel/io.c

@@ -647,6 +647,10 @@ void _memset_c_io(volatile void __iomem *to, unsigned long c, long count)
 
 EXPORT_SYMBOL(_memset_c_io);
 
+#if IS_ENABLED(CONFIG_VGA_CONSOLE) || IS_ENABLED(CONFIG_MDA_CONSOLE)
+
+#include <asm/vga.h>
+
 /* A version of memcpy used by the vga console routines to move data around
    arbitrarily between screen and main memory.  */
 
@@ -681,6 +685,21 @@ scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
 
 EXPORT_SYMBOL(scr_memcpyw);
 
+void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
+{
+	if (d < s)
+		scr_memcpyw(d, s, count);
+	else {
+		count /= 2;
+		d += count;
+		s += count;
+		while (count--)
+			scr_writew(scr_readw(--s), --d);
+	}
+}
+EXPORT_SYMBOL(scr_memmovew);
+#endif
+
 void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);

arch/alpha/kernel/irq.c

@@ -28,6 +28,7 @@
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
+#include "irq_impl.h"
 
 volatile unsigned long irq_err_count;
 DEFINE_PER_CPU(unsigned long, irq_pmi_count);

arch/alpha/kernel/irq_i8259.c

@@ -98,10 +98,6 @@ init_i8259a_irqs(void)
 
 #if defined(CONFIG_ALPHA_GENERIC)
 # define IACK_SC	alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC	APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC	LCA_IACK_SC
 #elif defined(CONFIG_ALPHA_CIA)
 # define IACK_SC	CIA_IACK_SC
 #elif defined(CONFIG_ALPHA_PYXIS)

arch/alpha/kernel/machvec_impl.h

@@ -44,33 +44,14 @@
 
 #define DO_DEFAULT_RTC			.rtc_port = 0x70
 
-#define DO_EV4_MMU							\
-	.max_asn =			EV4_MAX_ASN,			\
-	.mv_switch_mm =			ev4_switch_mm,			\
-	.mv_activate_mm =		ev4_activate_mm,		\
-	.mv_flush_tlb_current =		ev4_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev4_flush_tlb_current_page
-
 #define DO_EV5_MMU							\
-	.max_asn =			EV5_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV5_MAX_ASN			\
 
 #define DO_EV6_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define DO_EV7_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define IO_LITE(UP,low)							\
 	.hae_register =		(unsigned long *) CAT(UP,_HAE_ADDRESS),	\

arch/alpha/kernel/pci-noop.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/pci-noop.c
- *
- * Stub PCI interfaces for Jensen-specific kernels.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/gfp.h>
-#include <linux/capability.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/syscalls.h>
-
-#include "proto.h"
-
-
-/*
- * The PCI controller list.
- */
-
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
-
-
-struct pci_controller * __init
-alloc_pci_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	return hose;
-}
-
-struct resource * __init
-alloc_resource(void)
-{
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
-}
-
-SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
-		unsigned long, dfn)
-{
-	struct pci_controller *hose;
-
-	/* from hose or from bus.devfn */
-	if (which & IOBASE_FROM_HOSE) {
-		for (hose = hose_head; hose; hose = hose->next)
-			if (hose->index == bus)
-				break;
-		if (!hose)
-			return -ENODEV;
-	} else {
-		/* Special hook for ISA access.  */
-		if (bus == 0 && dfn == 0)
-			hose = pci_isa_hose;
-		else
-			return -ENODEV;
-	}
-
-	switch (which & ~IOBASE_FROM_HOSE) {
-	case IOBASE_HOSE:
-		return hose->index;
-	case IOBASE_SPARSE_MEM:
-		return hose->sparse_mem_base;
-	case IOBASE_DENSE_MEM:
-		return hose->dense_mem_base;
-	case IOBASE_SPARSE_IO:
-		return hose->sparse_io_base;
-	case IOBASE_DENSE_IO:
-		return hose->dense_io_base;
-	case IOBASE_ROOT_BUS:
-		return hose->bus->number;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
-
-SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}

arch/alpha/kernel/pci_impl.h

@@ -143,9 +143,7 @@ struct pci_iommu_arena
 	unsigned int align_entry;
 };
 
-#if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
-     defined(CONFIG_ALPHA_AVANTI))
+#if defined(CONFIG_ALPHA_SRM) && defined(CONFIG_ALPHA_CIA)
 # define NEED_SRM_SAVE_RESTORE
 #else
 # undef NEED_SRM_SAVE_RESTORE

arch/alpha/kernel/perf_event.c

@@ -870,7 +870,7 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 /*
  * Init call to initialise performance events at kernel startup.
  */
-int __init init_hw_perf_events(void)
+static int __init init_hw_perf_events(void)
 {
 	pr_info("Performance events: ");
 

arch/alpha/kernel/proto.h

@@ -15,13 +15,7 @@ struct pt_regs;
 struct task_struct;
 struct pci_dev;
 struct pci_controller;
-
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+struct pci_bus;
 
 /* core_cia.c */
 extern struct pci_ops cia_pci_ops;
@@ -38,12 +32,6 @@ extern int irongate_pci_clr_err(void);
 extern void irongate_init_arch(void);
 #define irongate_pci_tbi ((void *)0)
 
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
 /* core_marvel.c */
 extern struct pci_ops marvel_pci_ops;
 extern void marvel_init_arch(void);
@@ -114,6 +102,9 @@ extern int boot_cpuid;
 #ifdef CONFIG_VERBOSE_MCHECK
 extern unsigned long alpha_verbose_mcheck;
 #endif
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void * __init move_initrd(unsigned long);
+#endif
 extern struct screen_info vgacon_screen_info;
 
 /* srmcons.c */
@@ -128,6 +119,7 @@ extern void unregister_srm_console(void);
 /* smp.c */
 extern void setup_smp(void);
 extern void handle_ipi(struct pt_regs *);
+extern void __init smp_callin(void);
 
 /* bios32.c */
 /* extern void reset_for_srm(void); */
@@ -139,13 +131,13 @@ extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
 
 /* smc37c93x.c */
-extern void SMC93x_Init(void);
+extern int __init SMC93x_Init(void);
 
 /* smc37c669.c */
-extern void SMC669_Init(int);
+extern void __init SMC669_Init(int);
 
 /* es1888.c */
-extern void es1888_init(void);
+extern void __init es1888_init(void);
 
 /* ../lib/fpreg.c */
 extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
@@ -166,19 +158,37 @@ extern void entSys(void);
 extern void entUna(void);
 extern void entDbg(void);
 
+/* pci.c */
+extern void pcibios_claim_one_bus(struct pci_bus *);
+
 /* ptrace.c */
 extern int ptrace_set_bpt (struct task_struct *child);
 extern int ptrace_cancel_bpt (struct task_struct *child);
+extern void syscall_trace_leave(void);
+extern unsigned long syscall_trace_enter(void);
+
+/* signal.c */
+struct sigcontext;
+extern void do_sigreturn(struct sigcontext __user *);
+struct rt_sigframe;
+extern void do_rt_sigreturn(struct rt_sigframe __user *);
+extern void do_work_pending(struct pt_regs *, unsigned long, unsigned long, unsigned long);
 
 /* traps.c */
 extern void dik_show_regs(struct pt_regs *regs, unsigned long *r9_15);
 extern void die_if_kernel(char *, struct pt_regs *, long, unsigned long *);
+extern void do_entInt(unsigned long, unsigned long, unsigned long, struct pt_regs *);
+extern void do_entArith(unsigned long, unsigned long, struct pt_regs *);
+extern void do_entIF(unsigned long, struct pt_regs *);
+extern void do_entDbg(struct pt_regs *);
+struct allregs;
+extern void do_entUna(void *, unsigned long, unsigned long, struct allregs *);
+extern void do_entUnaUser(void __user *, unsigned long, unsigned long, struct pt_regs *);
 
 /* sys_titan.c */
 extern void titan_dispatch_irqs(u64);
 
 /* ../mm/init.c */
-extern void switch_to_system_map(void);
 extern void srm_paging_stop(void);
 
 static inline int

arch/alpha/kernel/setup.c

@@ -171,35 +171,22 @@ EXPORT_SYMBOL(__direct_map_size);
 	asm(".weak "#X)
 
 WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
 WEAK(clipper_mv);
 WEAK(dp264_mv);
 WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
 WEAK(eiger_mv);
-WEAK(jensen_mv);
 WEAK(lx164_mv);
-WEAK(lynx_mv);
 WEAK(marvel_ev7_mv);
 WEAK(miata_mv);
-WEAK(mikasa_mv);
 WEAK(mikasa_primo_mv);
 WEAK(monet_mv);
 WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
 WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
 WEAK(pc164_mv);
 WEAK(privateer_mv);
 WEAK(rawhide_mv);
 WEAK(ruffian_mv);
 WEAK(rx164_mv);
-WEAK(sable_mv);
 WEAK(sable_gamma_mv);
 WEAK(shark_mv);
 WEAK(sx164_mv);
@@ -207,7 +194,6 @@ WEAK(takara_mv);
 WEAK(titan_mv);
 WEAK(webbrick_mv);
 WEAK(wildfire_mv);
-WEAK(xl_mv);
 WEAK(xlt_mv);
 
 #undef WEAK
@@ -224,7 +210,7 @@ static void __init
 reserve_std_resources(void)
 {
 	static struct resource standard_io_resources[] = {
-		{ .name = "rtc", .start = -1, .end = -1 },
+		{ .name = "rtc", .start = 0x70, .end =  0x7f},
         	{ .name = "dma1", .start = 0x00, .end = 0x1f },
         	{ .name = "pic1", .start = 0x20, .end = 0x3f },
         	{ .name = "timer", .start = 0x40, .end = 0x5f },
@@ -246,10 +232,6 @@ reserve_std_resources(void)
 			}
 	}
 
-	/* Fix up for the Jensen's queer RTC placement.  */
-	standard_io_resources[0].start = RTC_PORT(0);
-	standard_io_resources[0].end = RTC_PORT(0) + 0x0f;
-
 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
 		request_resource(io, standard_io_resources+i);
 }
@@ -486,14 +468,7 @@ setup_arch(char **cmdline_p)
 	/* 
 	 * Locate the command line.
 	 */
-	/* Hack for Jensen... since we're restricted to 8 or 16 chars for
-	   boot flags depending on the boot mode, we need some shorthand.
-	   This should do for installation.  */
-	if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
-		strscpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof(command_line));
-	} else {
-		strscpy(command_line, COMMAND_LINE, sizeof(command_line));
-	}
+	strscpy(command_line, COMMAND_LINE, sizeof(command_line));
 	strcpy(boot_command_line, command_line);
 	*cmdline_p = command_line;
 
@@ -706,12 +681,6 @@ static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
 static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
 static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
 
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
 static char marvel_names[][16] = {
 	"Marvel/EV7"
 };
@@ -745,26 +714,26 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		NULL,		/* Ruby */
 		NULL,		/* Flamingo */
 		NULL,		/* Mannequin */
-		&jensen_mv,
+		NULL,		/* Jensens */
 		NULL, 		/* Pelican */
 		NULL,		/* Morgan */
 		NULL,		/* Sable -- see below.  */
 		NULL,		/* Medulla */
-		&noname_mv,
+		NULL,		/* Noname */
 		NULL,		/* Turbolaser */
-		&avanti_mv,
+		NULL,		/* Avanti */
 		NULL,		/* Mustang */
 		NULL,		/* Alcor, Bret, Maverick. HWRPB inaccurate? */
 		NULL,		/* Tradewind */
 		NULL,		/* Mikasa -- see below.  */
 		NULL,		/* EB64 */
-		NULL,		/* EB66 -- see variation.  */
-		NULL,		/* EB64+ -- see variation.  */
-		&alphabook1_mv,
+		NULL,		/* EB66 */
+		NULL,		/* EB64+ */
+		NULL,		/* Alphabook1 */
 		&rawhide_mv,
 		NULL,		/* K2 */
-		&lynx_mv,	/* Lynx */
-		&xl_mv,
+		NULL,		/* Lynx */
+		NULL,		/* XL */
 		NULL,		/* EB164 -- see variation.  */
 		NULL,		/* Noritake -- see below.  */
 		NULL,		/* Cortex */
@@ -803,19 +772,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
 	};
 
-	static struct alpha_machine_vector *eb64p_vecs[] __initdata =
-	{
-		&eb64p_mv,
-		&cabriolet_mv,
-		&cabriolet_mv		/* AlphaPCI64 */
-	};
-
-	static struct alpha_machine_vector *eb66_vecs[] __initdata =
-	{
-		&eb66_mv,
-		&eb66p_mv
-	};
-
 	static struct alpha_machine_vector *marvel_vecs[] __initdata =
 	{
 		&marvel_ev7_mv,
@@ -883,14 +839,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 			if (vec == &eb164_mv && cpu == EV56_CPU)
 				vec = &pc164_mv;
 			break;
-		case ST_DEC_EB64P:
-			if (member < ARRAY_SIZE(eb64p_indices))
-				vec = eb64p_vecs[eb64p_indices[member]];
-			break;
-		case ST_DEC_EB66:
-			if (member < ARRAY_SIZE(eb66_indices))
-				vec = eb66_vecs[eb66_indices[member]];
-			break;
 		case ST_DEC_MARVEL:
 			if (member < ARRAY_SIZE(marvel_indices))
 				vec = marvel_vecs[marvel_indices[member]];
@@ -905,22 +853,13 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 				vec = tsunami_vecs[tsunami_indices[member]];
 			break;
 		case ST_DEC_1000:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &mikasa_primo_mv;
-			else
-				vec = &mikasa_mv;
+			vec = &mikasa_primo_mv;
 			break;
 		case ST_DEC_NORITAKE:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &noritake_primo_mv;
-			else
-				vec = &noritake_mv;
+			vec = &noritake_primo_mv;
 			break;
 		case ST_DEC_2100_A500:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &sable_gamma_mv;
-			else
-				vec = &sable_mv;
+			vec = &sable_gamma_mv;
 			break;
 		}
 	}
@@ -933,41 +872,27 @@ get_sysvec_byname(const char *name)
 	static struct alpha_machine_vector *all_vecs[] __initdata =
 	{
 		&alcor_mv,
-		&alphabook1_mv,
-		&avanti_mv,
-		&cabriolet_mv,
 		&clipper_mv,
 		&dp264_mv,
 		&eb164_mv,
-		&eb64p_mv,
-		&eb66_mv,
-		&eb66p_mv,
 		&eiger_mv,
-		&jensen_mv,
 		&lx164_mv,
-		&lynx_mv,
 		&miata_mv,
-		&mikasa_mv,
 		&mikasa_primo_mv,
 		&monet_mv,
 		&nautilus_mv,
-		&noname_mv,
-		&noritake_mv,
 		&noritake_primo_mv,
-		&p2k_mv,
 		&pc164_mv,
 		&privateer_mv,
 		&rawhide_mv,
 		&ruffian_mv,
 		&rx164_mv,
-		&sable_mv,
 		&sable_gamma_mv,
 		&shark_mv,
 		&sx164_mv,
 		&takara_mv,
 		&webbrick_mv,
 		&wildfire_mv,
-		&xl_mv,
 		&xlt_mv
 	};
 
@@ -1029,14 +954,6 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
 		if (member < ARRAY_SIZE(alcor_indices))
 			*variation_name = alcor_names[alcor_indices[member]];
 		break;
-	case ST_DEC_EB64P:
-		if (member < ARRAY_SIZE(eb64p_indices))
-			*variation_name = eb64p_names[eb64p_indices[member]];
-		break;
-	case ST_DEC_EB66:
-		if (member < ARRAY_SIZE(eb66_indices))
-			*variation_name = eb66_names[eb66_indices[member]];
-		break;
 	case ST_DEC_MARVEL:
 		if (member < ARRAY_SIZE(marvel_indices))
 			*variation_name = marvel_names[marvel_indices[member]];

arch/alpha/kernel/smc37c669.c

@@ -11,6 +11,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #if 0
 # define DBG_DEVS(args)         printk args
 #else
@@ -2430,13 +2432,15 @@ int __init smcc669_write( struct FILE *fp, int size, int number, unsigned char *
 }
 #endif
 
-void __init
+#if SMC_DEBUG
+static void __init
 SMC37c669_dump_registers(void)
 {
   int i;
   for (i = 0; i <= 0x29; i++)
     printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
 }
+#endif
 /*+
  * ============================================================================
  * = SMC_init - SMC37c669 Super I/O controller initialization                 =

arch/alpha/kernel/smc37c93x.c

@@ -12,6 +12,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #define SMC_DEBUG 0
 
 #if SMC_DEBUG

arch/alpha/kernel/smp.c

@@ -38,6 +38,7 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
 
 #include "proto.h"
 #include "irq_impl.h"

arch/alpha/kernel/srmcons.c

@@ -21,6 +21,8 @@
 #include <asm/console.h>
 #include <linux/uaccess.h>
 
+#include "proto.h"
+
 
 static DEFINE_SPINLOCK(srmcons_callback_lock);
 static int srm_is_registered_console = 0;

arch/alpha/kernel/sys_cabriolet.c

@@ -6,8 +6,7 @@
  *	Copyright (C) 1996 Jay A Estabrook
  *	Copyright (C) 1998, 1999, 2000 Richard Henderson
  *
- * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
- * PC164 and LX164.
+ * Code supporting the PC164 and LX164.
  */
 
 #include <linux/kernel.h>
@@ -23,9 +22,7 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
-#include <asm/core_lca.h>
 #include <asm/tlbflush.h>
 
 #include "proto.h"
@@ -232,13 +229,6 @@ cabriolet_enable_ide(void)
 	}
 }
 
-static inline void __init
-cabriolet_init_pci(void)
-{
-	common_init_pci();
-	cabriolet_enable_ide();
-}
-
 static inline void __init
 cia_cab_init_pci(void)
 {
@@ -317,81 +307,6 @@ alphapc164_init_pci(void)
  * The System Vector
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
-	.vector_name		= "Cabriolet",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
-struct alpha_machine_vector eb164_mv __initmv = {
-	.vector_name		= "EB164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_cab_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb164)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
-	.vector_name		= "EB66+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= eb66p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
 struct alpha_machine_vector lx164_mv __initmv = {
 	.vector_name		= "LX164",

arch/alpha/kernel/sys_eb64p.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_eb64p.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
-	outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
-	.name		= "EB64P",
-	.irq_unmask	= eb64p_enable_irq,
-	.irq_mask	= eb64p_disable_irq,
-	.irq_mask_ack	= eb64p_disable_irq,
-};
-
-static void 
-eb64p_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers */
-	pld = inb(0x26) | (inb(0x27) << 8);
-
-	/*
-	 * Now, for every possible bit set, work through
-	 * them and call the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1;	/* clear least bit set */
-
-		if (i == 5) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(16 + i);
-		}
-	}
-}
-
-static void __init
-eb64p_init_irq(void)
-{
-	long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-	/*
-	 * CABRIO SRM may not set variation correctly, so here we test
-	 * the high word of the interrupt summary register for the RAZ
-	 * bits, and hope that a true EB64+ would read all ones...
-	 */
-	if (inw(0x806) != 0xffff) {
-		extern struct alpha_machine_vector cabriolet_mv;
-
-		printk("Detected Cabriolet: correcting HWRPB.\n");
-
-		hwrpb->sys_variation |= 2L << 10;
-		hwrpb_update_checksum(hwrpb);
-
-		alpha_mv = cabriolet_mv;
-		alpha_mv.init_irq();
-		return;
-	}
-#endif /* GENERIC */
-
-	outb(0xff, 0x26);
-	outb(0xff, 0x27);
-
-	init_i8259a_irqs();
-
-	for (i = 16; i < 32; ++i) {
-		irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	common_init_isa_dma();
-	if (request_irq(16 + 5, no_action, 0, "isa-cascade", NULL))
-		pr_err("Failed to register isa-cascade interrupt\n");
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 0
- * 1        Interrupt Line A from slot 1
- * 2        Interrupt Line B from slot 0
- * 3        Interrupt Line B from slot 1
- * 4        Interrupt Line C from slot 0
- * 5        Interrupt line from the two ISA PICs
- * 6        Tulip
- * 7        NCR SCSI
- *
- * Summary @ 0x27
- * Bit      Meaning
- * 0        Interrupt Line C from slot 1
- * 1        Interrupt Line D from slot 0
- * 2        Interrupt Line D from slot 1
- * 3        RAZ
- * 4        RAZ
- * 5        RAZ
- * 6        RAZ
- * 7        RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  5       NCR SCSI controller
- *  6       PCI on board slot 0
- *  7       PCI on board slot 1
- *  8       Intel SIO PCI-ISA bridge chip
- *  9       Tulip - DECchip 21040 Ethernet controller
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] = {
-		/*INT  INTA  INTB  INTC   INTD */
-		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
-		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */
-		{16+1, 16+1, 16+3, 16+8, 16+10},  /* IdSel 7,  slot ?, ?? */
-		{  -1,   -1,   -1,   -1,    -1},  /* IdSel 8,  SIO */
-		{16+6, 16+6, 16+6, 16+6,  16+6},  /* IdSel 9,  TULIP */
-	};
-	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
-	.vector_name		= "EB64+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= NULL,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
-	.vector_name		= "EB66",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif

arch/alpha/kernel/sys_jensen.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_jensen.c
- *
- *	Copyright (C) 1995 Linus Torvalds
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the Jensen.
- */
-#define __EXTERN_INLINE
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef  __EXTERN_INLINE
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/*
- * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
- * 0x9X0 for the local motherboard interrupts.
- *
- * Note especially that those local interrupts CANNOT be masked,
- * which causes much of the pain below...
- *
- *	0x660 - NMI
- *
- *	0x800 - IRQ0  interval timer (not used, as we use the RTC timer)
- *	0x810 - IRQ1  line printer (duh..)
- *	0x860 - IRQ6  floppy disk
- *
- *	0x900 - COM1
- *	0x920 - COM2
- *	0x980 - keyboard
- *	0x990 - mouse
- *
- * PCI-based systems are more sane: they don't have the local
- * interrupts at all, and have only normal PCI interrupts from
- * devices.  Happily it's easy enough to do a sane mapping from the
- * Jensen.
- * 
- * Note that this means that we may have to do a hardware
- * "local_op" to a different interrupt than we report to the rest of the
- * world.
- */
-
-static void
-jensen_local_enable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_enable_irq(d);
-}
-
-static void
-jensen_local_disable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_disable_irq(d);
-}
-
-static void
-jensen_local_mask_ack(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_mask_and_ack_irq(d);
-}
-
-static struct irq_chip jensen_local_irq_type = {
-	.name		= "LOCAL",
-	.irq_unmask	= jensen_local_enable,
-	.irq_mask	= jensen_local_disable,
-	.irq_mask_ack	= jensen_local_mask_ack,
-};
-
-static void 
-jensen_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	switch (vector) {
-	case 0x660:
-		printk("Whee.. NMI received. Probable hardware error\n");
-		printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
-		return;
-
-	/* local device interrupts: */
-	case 0x900: irq = 4; break;		/* com1 -> irq 4 */
-	case 0x920: irq = 3; break;		/* com2 -> irq 3 */
-	case 0x980: irq = 1; break;		/* kbd -> irq 1 */
-	case 0x990: irq = 9; break;		/* mouse -> irq 9 */
-
-	default:
-		if (vector > 0x900) {
-			printk("Unknown local interrupt %lx\n", vector);
-			return;
-		}
-
-		irq = (vector - 0x800) >> 4;
-		if (irq == 1)
-			irq = 7;
-		break;
-	}
-
-	/* If there is no handler yet... */
-	if (!irq_has_action(irq)) {
-	    /* If it is a local interrupt that cannot be masked... */
-	    if (vector >= 0x900)
-	    {
-	        /* Clear keyboard/mouse state */
-	    	inb(0x64);
-		inb(0x60);
-		/* Reset serial ports */
-		inb(0x3fa);
-		inb(0x2fa);
-		outb(0x0c, 0x3fc);
-		outb(0x0c, 0x2fc);
-		/* Clear NMI */
-		outb(0,0x61);
-		outb(0,0x461);
-	    }
-	}
-
-#if 0
-        /* A useful bit of code to find out if an interrupt is going wild.  */
-        {
-          static unsigned int last_msg = 0, last_cc = 0;
-          static int last_irq = -1, count = 0;
-          unsigned int cc;
-
-          __asm __volatile("rpcc %0" : "=r"(cc));
-          ++count;
-#define JENSEN_CYCLES_PER_SEC	(150000000)
-          if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
-	      irq != last_irq) {
-                printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
-                       irq, count, cc-last_cc, get_irq_regs()->pc);
-                count = 0;
-                last_msg = cc;
-                last_irq = irq;
-          }
-          last_cc = cc;
-        }
-#endif
-
-	handle_irq(irq);
-}
-
-static void __init
-jensen_init_irq(void)
-{
-	init_i8259a_irqs();
-
-	irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
-
-	common_init_isa_dma();
-}
-
-static void __init
-jensen_init_arch(void)
-{
-	struct pci_controller *hose;
-#ifdef CONFIG_PCI
-	static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
-
-	isa_bridge = &fake_isa_bridge;
-#endif
-
-	/* Create a hose so that we can report i/o base addresses to
-	   userland.  */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
-	hose->dense_mem_base = 0;
-	hose->sparse_io_base = EISA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	hose->sg_isa = hose->sg_pci = NULL;
-	__direct_map_base = 0;
-	__direct_map_size = 0xffffffff;
-}
-
-static void
-jensen_machine_check(unsigned long vector, unsigned long la)
-{
-	printk(KERN_CRIT "Machine check\n");
-}
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector jensen_mv __initmv = {
-	.vector_name		= "Jensen",
-	DO_EV4_MMU,
-	IO_LITE(JENSEN,jensen),
-	.machine_check		= jensen_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.rtc_port		= 0x170,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= jensen_device_interrupt,
-
-	.init_arch		= jensen_init_arch,
-	.init_irq		= jensen_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= NULL,
-	.kill_arch		= NULL,
-};
-ALIAS_MV(jensen)

arch/alpha/kernel/sys_mikasa.c

@@ -23,7 +23,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -164,64 +163,9 @@ mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-	struct el_common *mchk_header;
-	unsigned int code;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);
-	mb();
-
-	code = mchk_header->code;
-	process_mcheck_info(vector, la_ptr, "MIKASA APECS",
-			    (mcheck_expected(0)
-			     && (code == MCHK_NO_DEVSEL
-			         || code == MCHK_NO_TABT)));
-}
-#endif
-
-
 /*
  * The System Vector
  */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
-	.vector_name		= "Mikasa",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= mikasa_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= mikasa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= mikasa_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= mikasa_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.vector_name		= "Mikasa-Primo",
 	DO_EV5_MMU,
@@ -244,4 +188,3 @@ struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.pci_swizzle		= common_swizzle,
 };
 ALIAS_MV(mikasa_primo)
-#endif

arch/alpha/kernel/sys_nautilus.c

@@ -78,7 +78,7 @@ nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-void
+static void
 nautilus_kill_arch(int mode)
 {
 	struct pci_bus *bus = pci_isa_hose->bus;
@@ -127,7 +127,7 @@ naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
 /* Machine checks can come from two sources - those on the CPU and those
    in the system.  They are analysed separately but all starts here.  */
 
-void
+static void
 nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	char *mchk_class;
@@ -184,8 +184,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 	mb();
 }
 
-extern void pcibios_claim_one_bus(struct pci_bus *);
-
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -197,7 +195,7 @@ static struct resource busn_resource = {
 	.flags	= IORESOURCE_BUS,
 };
 
-void __init
+static void __init
 nautilus_init_pci(void)
 {
 	struct pci_controller *hose = hose_head;

arch/alpha/kernel/sys_noritake.c

@@ -24,7 +24,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -253,64 +252,6 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp)
 	return slot;
 }
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-        struct el_common *mchk_header;
-        unsigned int code;
-
-        mchk_header = (struct el_common *)la_ptr;
-
-        /* Clear the error before any reporting.  */
-        mb();
-        mb(); /* magic */
-        draina();
-        apecs_pci_clr_err();
-        wrmces(0x7);
-        mb();
-
-        code = mchk_header->code;
-        process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
-                            (mcheck_expected(0)
-                             && (code == MCHK_NO_DEVSEL
-                                 || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
-	.vector_name		= "Noritake",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= noritake_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= noritake_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= noritake_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= noritake_map_irq,
-	.pci_swizzle		= noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.vector_name		= "Noritake-Primo",
 	DO_EV5_MMU,
@@ -333,4 +274,3 @@ struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.pci_swizzle		= noritake_swizzle,
 };
 ALIAS_MV(noritake_primo)
-#endif

arch/alpha/kernel/sys_sable.c

@@ -212,232 +212,6 @@ sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 #endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-
-/***********************************************************************/
-/* LYNX hardware specifics
- */
-/*
- *   For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
- *
- * Bit      Meaning               Kernel IRQ
- *------------------------------------------
- * 0        
- * 1        
- * 2        
- * 3        mouse			12
- * 4        
- * 5        
- * 6        keyboard			1
- * 7        floppy			6
- * 8        COM2			3
- * 9        parallel port		7
- *10        EISA irq 3			-
- *11        EISA irq 4			-
- *12        EISA irq 5			5
- *13        EISA irq 6			-
- *14        EISA irq 7			-
- *15        COM1			4
- *16        EISA irq 9			9
- *17        EISA irq 10			10
- *18        EISA irq 11			11
- *19        EISA irq 12			-
- *20        
- *21        EISA irq 14			14
- *22        EISA irq 15			15
- *23        IIC				-
- *24        VGA (builtin)               -
- *25
- *26
- *27
- *28        NCR810 (builtin)		28
- *29
- *30
- *31
- *32        PCI 0 slot 4 A primary bus  32
- *33        PCI 0 slot 4 B primary bus  33
- *34        PCI 0 slot 4 C primary bus  34
- *35        PCI 0 slot 4 D primary bus
- *36        PCI 0 slot 5 A primary bus
- *37        PCI 0 slot 5 B primary bus
- *38        PCI 0 slot 5 C primary bus
- *39        PCI 0 slot 5 D primary bus
- *40        PCI 0 slot 6 A primary bus
- *41        PCI 0 slot 6 B primary bus
- *42        PCI 0 slot 6 C primary bus
- *43        PCI 0 slot 6 D primary bus
- *44        PCI 0 slot 7 A primary bus
- *45        PCI 0 slot 7 B primary bus
- *46        PCI 0 slot 7 C primary bus
- *47        PCI 0 slot 7 D primary bus
- *48        PCI 0 slot 0 A secondary bus
- *49        PCI 0 slot 0 B secondary bus
- *50        PCI 0 slot 0 C secondary bus
- *51        PCI 0 slot 0 D secondary bus
- *52        PCI 0 slot 1 A secondary bus
- *53        PCI 0 slot 1 B secondary bus
- *54        PCI 0 slot 1 C secondary bus
- *55        PCI 0 slot 1 D secondary bus
- *56        PCI 0 slot 2 A secondary bus
- *57        PCI 0 slot 2 B secondary bus
- *58        PCI 0 slot 2 C secondary bus
- *59        PCI 0 slot 2 D secondary bus
- *60        PCI 0 slot 3 A secondary bus
- *61        PCI 0 slot 3 B secondary bus
- *62        PCI 0 slot 3 C secondary bus
- *63        PCI 0 slot 3 D secondary bus
- */
-
-static void
-lynx_update_irq_hw(unsigned long bit, unsigned long mask)
-{
-	/*
-	 * Write the AIR register on the T3/T4 with the
-	 * address of the IC mask register (offset 0x40)
-	 */
-	*(vulp)T2_AIR = 0x40;
-	mb();
-	*(vulp)T2_AIR; /* re-read to force write */
-	mb();
-	*(vulp)T2_DIR = mask;    
-	mb();
-	mb();
-}
-
-static void
-lynx_ack_irq_hw(unsigned long bit)
-{
-	*(vulp)T2_VAR = (u_long) bit;
-	mb();
-	mb();
-}
-
-static irq_swizzle_t lynx_irq_swizzle = {
-	{ /* irq_to_mask */
-		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
-		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* pseudo */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	{ /* mask_to_irq */
-		-1, -1, -1, 12, -1, -1,  1,  6,	/* mask 0-7   */
-		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
-		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23 */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* mask 24-31 */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	-1,
-	lynx_update_irq_hw,
-	lynx_ack_irq_hw
-};
-
-static void __init
-lynx_init_irq(void)
-{
-	sable_lynx_irq_swizzle = &lynx_irq_swizzle;
-	sable_lynx_init_irq(64);
-}
-
-/*
- * PCI Fixup configuration for ALPHA LYNX (2100A)
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  0       none
- *  1       none
- *  2       PCI-EISA bridge
- *  3       PCI-PCI bridge
- *  4       NCR 810 (Demi-Lynx only)
- *  5       none
- *  6       PCI on board slot 4
- *  7       PCI on board slot 5
- *  8       PCI on board slot 6
- *  9       PCI on board slot 7
- *
- * And behind the PPB we have:
- *
- * 11       PCI on board slot 0
- * 12       PCI on board slot 1
- * 13       PCI on board slot 2
- * 14       PCI on board slot 3
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int
-lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[19][5] = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 13,  PCEB   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 14,  PPB    */
-		{   28,    28,    28,    28,    28},  /* IdSel 15,  NCR demi */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none   */
-		{   32,    32,    33,    34,    35},  /* IdSel 17,  slot 4 */
-		{   36,    36,    37,    38,    39},  /* IdSel 18,  slot 5 */
-		{   40,    40,    41,    42,    43},  /* IdSel 19,  slot 6 */
-		{   44,    44,    45,    46,    47},  /* IdSel 20,  slot 7 */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 22,  none   */
-		/* The following are actually behind the PPB. */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16   none */
-		{   28,    28,    28,    28,    28},  /* IdSel 17   NCR lynx */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21   none */
-		{   48,    48,    49,    50,    51},  /* IdSel 22   slot 0 */
-		{   52,    52,    53,    54,    55},  /* IdSel 23   slot 1 */
-		{   56,    56,    57,    58,    59},  /* IdSel 24   slot 2 */
-		{   60,    60,    61,    62,    63}   /* IdSel 25   slot 3 */
-	};
-	const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8
-lynx_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}
-	/* Check for the built-in bridge */
-	else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-		slot = PCI_SLOT(dev->devfn) + 11;
-	}
-	else
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-				slot = PCI_SLOT(dev->devfn) + 11;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
-
 /***********************************************************************/
 /* GENERIC irq routines */
 
@@ -539,40 +313,7 @@ sable_lynx_init_pci(void)
  * these games with GAMMA_BIAS.
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS 0
-struct alpha_machine_vector sable_mv __initmv = {
-	.vector_name		= "Sable",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 40,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= sable_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= sable_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= 0
-	} }
-};
-ALIAS_MV(sable)
-#endif /* GENERIC || (SABLE && !GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
 #undef GAMMA_BIAS
 #define GAMMA_BIAS _GAMMA_BIAS
 struct alpha_machine_vector sable_gamma_mv __initmv = {
@@ -601,35 +342,4 @@ struct alpha_machine_vector sable_gamma_mv __initmv = {
 	} }
 };
 ALIAS_MV(sable_gamma)
-#endif /* GENERIC || (SABLE && GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector lynx_mv __initmv = {
-	.vector_name		= "Lynx",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= lynx_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= lynx_map_irq,
-	.pci_swizzle		= lynx_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= _GAMMA_BIAS
-	} }
-};
-ALIAS_MV(lynx)
-#endif /* GENERIC || LYNX */
+#endif /* GENERIC || SABLE */

arch/alpha/kernel/sys_sio.c

-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_sio.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge.  This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up.  */
-struct 
-{
-	unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-#ifdef CONFIG_VGA_CONSOLE
-	/* The AlphaBook1 has LCD video fixed at 800x600,
-	   37 rows and 100 cols. */
-	vgacon_screen_info.orig_y = 37;
-	vgacon_screen_info.orig_video_cols = 100;
-	vgacon_screen_info.orig_video_lines = 37;
-#endif
-
-	lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- *		PIRQ0 -> irq 15
- *		PIRQ1 -> irq  9
- *		PIRQ2 -> irq 10
- *		PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO.  For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
-	unsigned int orig_route_tab;
-
-	/* First, ALWAYS read and print the original setting. */
-	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				  &orig_route_tab);
-	printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
-	       orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	saved_config.orig_route_tab = orig_route_tab;
-#endif
-
-	/* Now override with desired setting. */
-	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   alpha_mv.sys.sio.route_tab);
-}
-
-static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
-{
-	if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
-	    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
-		return false;
-
-	return true;
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
-	unsigned int level_bits = 0;
-	struct pci_dev *dev = NULL;
-
-	/* Iterate through the devices, collecting IRQ levels.  */
-	for_each_pci_dev(dev) {
-		if (!sio_pci_dev_irq_needs_level(dev))
-			continue;
-
-		if (dev->irq)
-			level_bits |= (1 << dev->irq);
-	}
-	return level_bits;
-}
-
-static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
-{
-	unsigned int old_level_bits;
-
-	/*
-	 * Now, make all PCI interrupts level sensitive.  Notice:
-	 * these registers must be accessed byte-wise.  inw()/outw()
-	 * don't work.
-	 *
-	 * Make sure to turn off any level bits set for IRQs 9,10,11,15,
-	 *  so that the only bits getting set are for devices actually found.
-	 * Note that we do preserve the remainder of the bits, which we hope
-	 *  will be set correctly by ARC/SRM.
-	 *
-	 * Note: we at least preserve any level-set bits on AlphaBook1
-	 */
-	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
-	if (reset)
-		old_level_bits &= 0x71ff;
-
-	level_bits |= old_level_bits;
-
-	outb((level_bits >> 0) & 0xff, 0x4d0);
-	outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline void
-sio_fixup_irq_levels(unsigned int level_bits)
-{
-	__sio_fixup_irq_levels(level_bits, true);
-}
-
-static inline int
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * The Noname board has 5 PCI slots with each of the 4
-	 * interrupt pins routed to different pins on the PCI/ISA
-	 * bridge (PIRQ0-PIRQ3).  The table below is based on
-	 * information available at:
-	 *
-	 *   http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
-	 *
-	 * I have no information on the Avanti interrupt routing, but
-	 * the routing seems to be identical to the Noname except
-	 * that the Avanti has an additional slot whose routing I'm
-	 * unsure of.
-	 *
-	 * pirq_tab[0] is a fake entry to deal with old PCI boards
-	 * that have the interrupt pin number hardwired to 0 (meaning
-	 * that they use the default INTA line, if they are interrupt
-	 * driven at all).
-	 */
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 2,  2, -1, -1, -1}, /* idsel  8 (Hack: slot closest ISA) */
-		{-1, -1, -1, -1, -1}, /* idsel  9 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{ 0,  0,  2,  1,  0}, /* idsel 11 KN25_PCI_SLOT0 */
-		{ 1,  1,  0,  2,  1}, /* idsel 12 KN25_PCI_SLOT1 */
-		{ 2,  2,  1,  0,  2}, /* idsel 13 KN25_PCI_SLOT2 */
-		{ 0,  0,  0,  0,  0}, /* idsel 14 AS255 TULIP */
-	};
-	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-
-	irq = irq >= 0 ? tmp : -1;
-
-	/* Fixup IRQ level if an actual IRQ mapping is detected */
-	if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
-		__sio_fixup_irq_levels(1 << irq, false);
-
-	return irq;
-}
-
-static inline int
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 1,  1,  2,  3,  0}, /* idsel  8 (slot A) */
-		{ 2,  2,  3,  0,  1}, /* idsel  9 (slot B) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
-		{ 3,  3, -1, -1, -1}, /* idsel 12 (CMD0646) */
-	};
-	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-	return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
-	common_init_pci();
-	sio_pci_route();
-	sio_fixup_irq_levels(sio_collect_irq_levels());
-
-	if (pc873xx_probe() == -1) {
-		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
-	} else {
-		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
-			pc873xx_get_model(), pc873xx_get_base());
-
-		/* Enabling things in the Super IO chip doesn't actually
-		 * configure and enable things, the legacy drivers still
-		 * need to do the actual configuration and enabling.
-		 * This only unblocks them.
-		 */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
-		/* Don't bother on the Avanti family.
-		 * None of them had on-board IDE.
-		 */
-		pc873xx_enable_ide();
-#endif
-		pc873xx_enable_epp19();
-	}
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
-	struct pci_dev *dev;
-	unsigned char orig, config;
-
-	common_init_pci();
-	sio_pci_route();
-
-	/*
-	 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
-	 * is sensitive to PCI bus bursts, so we must DISABLE
-	 * burst mode for the NCR 8xx SCSI... :-(
-	 *
-	 * Note that the NCR810 SCSI driver must preserve the
-	 * setting of the bit in order for this to work.  At the
-	 * moment (2.0.29), ncr53c8xx.c does NOT do this, but
-	 * 53c7,8xx.c DOES.
-	 */
-
-	dev = NULL;
-	while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
-		if (dev->device == PCI_DEVICE_ID_NCR_53C810
-		    || dev->device == PCI_DEVICE_ID_NCR_53C815
-		    || dev->device == PCI_DEVICE_ID_NCR_53C820
-		    || dev->device == PCI_DEVICE_ID_NCR_53C825) {
-			unsigned long io_port;
-			unsigned char ctest4;
-
-			io_port = dev->resource[0].start;
-			ctest4 = inb(io_port+0x21);
-			if (!(ctest4 & 0x80)) {
-				printk("AlphaBook1 NCR init: setting"
-				       " burst disable\n");
-				outb(ctest4 | 0x80, io_port+0x21);
-			}
-                }
-	}
-
-	/* Do not set *ANY* level triggers for AlphaBook1. */
-	sio_fixup_irq_levels(0);
-
-	/* Make sure that register PR1 indicates 1Mb mem */
-	outb(0x0f, 0x3ce); orig = inb(0x3cf);   /* read PR5  */
-	outb(0x0f, 0x3ce); outb(0x05, 0x3cf);   /* unlock PR0-4 */
-	outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
-	if ((config & 0xc0) != 0xc0) {
-		printk("AlphaBook1 VGA init: setting 1Mb memory\n");
-		config |= 0xc0;
-		outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
-	}
-	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	/* Since we cannot read the PCI DMA Window CSRs, we
-	 * cannot restore them here.
-	 *
-	 * However, we CAN read the PIRQ route register, so restore it
-	 * now...
-	 */
- 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
-	.vector_name		= "AlphaBook1",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= alphabook1_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alphabook1_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* NCR810 SCSI is 14, PCMCIA controller is 15.  */
-		.route_tab	= 0x0e0f0a0a,
-	}}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
-struct alpha_machine_vector avanti_mv __initmv = {
-	.vector_name		= "Avanti",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
-	}}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
-struct alpha_machine_vector noname_mv __initmv = {
-	.vector_name		= "Noname",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* For UDB, the only available PCI slot must not map to IRQ 9,
-		   since that's the builtin MSS sound chip. That PCI slot
-		   will map to PIRQ1 (for INTA at least), so we give it IRQ 15
-		   instead.
-
-		   Unfortunately we have to do this for NONAME as well, since
-		   they are co-indicated when the platform type "Noname" is
-		   selected... :-(  */
-
-		.route_tab	= 0x0b0a0f0d,
-	}}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
-	.vector_name		= "Platform2000",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= p2k_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
-	.vector_name		= "XL",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_XL_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= XL_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(xl)
-#endif

arch/alpha/kernel/syscalls/syscall.tbl

@@ -474,7 +474,7 @@
 542	common	fsmount				sys_fsmount
 543	common	fspick				sys_fspick
 544	common	pidfd_open			sys_pidfd_open
-# 545 reserved for clone3
+545	common	clone3				alpha_clone3
 546	common	close_range			sys_close_range
 547	common	openat2				sys_openat2
 548	common	pidfd_getfd			sys_pidfd_getfd

arch/alpha/kernel/traps.c

@@ -30,39 +30,6 @@
 
 #include "proto.h"
 
-/* Work-around for some SRMs which mishandle opDEC faults.  */
-
-static int opDEC_fix;
-
-static void
-opDEC_check(void)
-{
-	__asm__ __volatile__ (
-	/* Load the address of... */
-	"	br	$16, 1f\n"
-	/* A stub instruction fault handler.  Just add 4 to the
-	   pc and continue.  */
-	"	ldq	$16, 8($sp)\n"
-	"	addq	$16, 4, $16\n"
-	"	stq	$16, 8($sp)\n"
-	"	call_pal %[rti]\n"
-	/* Install the instruction fault handler.  */
-	"1:	lda	$17, 3\n"
-	"	call_pal %[wrent]\n"
-	/* With that in place, the fault from the round-to-minf fp
-	   insn will arrive either at the "lda 4" insn (bad) or one
-	   past that (good).  This places the correct fixup in %0.  */
-	"	lda %[fix], 0\n"
-	"	cvttq/svm $f31,$f31\n"
-	"	lda %[fix], 4"
-	: [fix] "=r" (opDEC_fix)
-	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
-	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
-
-	if (opDEC_fix)
-		printk("opDEC fixup enabled.\n");
-}
-
 void
 dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
 {
@@ -353,32 +320,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 		return;
 
 	      case 4: /* opDEC */
-		if (implver() == IMPLVER_EV4) {
-			long si_code;
-
-			/* The some versions of SRM do not handle
-			   the opDEC properly - they return the PC of the
-			   opDEC fault, not the instruction after as the
-			   Alpha architecture requires.  Here we fix it up.
-			   We do this by intentionally causing an opDEC
-			   fault during the boot sequence and testing if
-			   we get the correct PC.  If not, we set a flag
-			   to correct it every time through.  */
-			regs->pc += opDEC_fix; 
-			
-			/* EV4 does not implement anything except normal
-			   rounding.  Everything else will come here as
-			   an illegal instruction.  Emulate them.  */
-			si_code = alpha_fp_emul(regs->pc - 4);
-			if (si_code == 0)
-				return;
-			if (si_code > 0) {
-				send_sig_fault_trapno(SIGFPE, si_code,
-						      (void __user *) regs->pc,
-						      0, current);
-				return;
-			}
-		}
 		break;
 
 	      case 5: /* illoc */
@@ -979,11 +920,6 @@ trap_init(void)
 	register unsigned long gptr __asm__("$29");
 	wrkgp(gptr);
 
-	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
-	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
-	if (implver() == IMPLVER_EV4)
-		opDEC_check();
-
 	wrent(entArith, 1);
 	wrent(entMM, 2);
 	wrent(entIF, 3);

arch/alpha/lib/Makefile

@@ -44,17 +44,3 @@ AFLAGS___remlu.o =       -DREM -DINTSIZE
 $(addprefix $(obj)/,__divqu.o __remqu.o __divlu.o __remlu.o): \
 						$(src)/$(ev6-y)divide.S FORCE
 	$(call if_changed_rule,as_o_S)
-
-# There are direct branches between {str*cpy,str*cat} and stx*cpy.
-# Ensure the branches are within range by merging these objects.
-
-LDFLAGS_stycpy.o := -r
-LDFLAGS_styncpy.o := -r
-
-$(obj)/stycpy.o: $(obj)/strcpy.o $(obj)/$(ev67-y)strcat.o \
-		 $(obj)/$(ev6-y)stxcpy.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/styncpy.o: $(obj)/strncpy.o $(obj)/$(ev67-y)strncat.o \
-		 $(obj)/$(ev6-y)stxncpy.o FORCE
-	$(call if_changed,ld)

arch/alpha/lib/checksum.c

@@ -12,6 +12,7 @@
  
 #include <linux/module.h>
 #include <linux/string.h>
+#include <net/checksum.h>
 
 #include <asm/byteorder.h>
 

arch/alpha/lib/fpreg.c

@@ -9,6 +9,7 @@
 #include <linux/export.h>
 #include <linux/preempt.h>
 #include <asm/thread_info.h>
+#include <asm/fpu.h>
 
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));

arch/alpha/lib/memcpy.c

@@ -18,6 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/export.h>
+#include <linux/string.h>
 
 /*
  * This should be done in one go with ldq_u*2/mask/stq_u. Do it
@@ -150,6 +151,8 @@ static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
 	DO_REST_ALIGNED_DN(d,s,n);
 }
 
+#undef memcpy
+
 void * memcpy(void * dest, const void *src, size_t n)
 {
 	if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {

arch/alpha/lib/stycpy.S

+#include "strcpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strcat.S"
+#else
+#include "strcat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxcpy.S"
+#else
+#include "stxcpy.S"
+#endif

arch/alpha/lib/styncpy.S

+#include "strncpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strncat.S"
+#else
+#include "strncat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxncpy.S"
+#else
+#include "stxncpy.S"
+#endif

arch/alpha/math-emu/math.c

@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <asm/ptrace.h>
+#include <asm/fpu.h>
 
 #include <linux/uaccess.h>
 
@@ -45,12 +46,6 @@
 #define MISC_TRAPB	0x0000
 #define MISC_EXCB	0x0400
 
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
-extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
-
-
 #ifdef MODULE
 
 MODULE_DESCRIPTION("FP Software completion module");

arch/alpha/mm/init.c

@@ -33,7 +33,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
+#include "../kernel/proto.h"
 
 static struct pcb_struct original_pcb;
 

drivers/char/agp/alpha-agp.c

@@ -149,7 +149,7 @@ struct agp_bridge_driver alpha_core_agp_driver = {
 
 struct agp_bridge_data *alpha_bridge;
 
-int __init
+static int __init
 alpha_core_agp_setup(void)
 {
 	alpha_agp_info *agp = alpha_mv.agp_info();

drivers/eisa/Kconfig

@@ -44,17 +44,16 @@ config EISA_PCI_EISA
 
 	  When in doubt, say Y.
 
-# Using EISA_VIRTUAL_ROOT on something other than an Alpha or
-# an X86 may lead to crashes...
+# Using EISA_VIRTUAL_ROOT on something other than an X86 may lead
+# to crashes...
 
 config EISA_VIRTUAL_ROOT
 	bool "EISA virtual root device"
-	depends on EISA && (ALPHA || X86)
+	depends on EISA && X86
 	default y
 	help
 	  Activate this option if your system only have EISA bus
-	  (no PCI slots). The Alpha Jensen is an example of such
-	  a system.
+	  (no PCI slots).
 
 	  When in doubt, say Y.
 

drivers/eisa/virtual_root.c

@@ -13,7 +13,7 @@
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 
-#if defined(CONFIG_ALPHA_JENSEN) || defined(CONFIG_EISA_VLB_PRIMING)
+#if defined(CONFIG_EISA_VLB_PRIMING)
 #define EISA_FORCE_PROBE_DEFAULT 1
 #else
 #define EISA_FORCE_PROBE_DEFAULT 0

drivers/input/serio/i8042-io.h

@@ -15,10 +15,7 @@
  * IRQs.
  */
 
-#ifdef __alpha__
-# define I8042_KBD_IRQ	1
-# define I8042_AUX_IRQ	(RTC_PORT(0) == 0x170 ? 9 : 12)	/* Jensen is special */
-#elif defined(__arm__)
+#if defined(__arm__)
 /* defined in include/asm-arm/arch-xxx/irqs.h */
 #include <asm/irq.h>
 #elif defined(CONFIG_PPC)

drivers/tty/serial/8250/8250.h

@@ -293,9 +293,6 @@ static inline int serial8250_in_MCR(struct uart_8250_port *up)
 	return mctrl;
 }
 
-bool alpha_jensen(void);
-void alpha_jensen_set_mctrl(struct uart_port *port, unsigned int mctrl);
-
 #ifdef CONFIG_SERIAL_8250_PNP
 int serial8250_pnp_init(void);
 void serial8250_pnp_exit(void);

drivers/tty/serial/8250/8250_alpha.c

-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/machvec.h>
-#include "8250.h"
-
-bool alpha_jensen(void)
-{
-	return !strcmp(alpha_mv.vector_name, "Jensen");
-}
-
-void alpha_jensen_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	/*
-	 * Digital did something really horribly wrong with the OUT1 and OUT2
-	 * lines on Alpha Jensen.  The failure mode is that if either is
-	 * cleared, the machine locks up with endless interrupts.
-	 */
-	mctrl |= TIOCM_OUT1 | TIOCM_OUT2;
-
-	serial8250_do_set_mctrl(port, mctrl);
-}

drivers/tty/serial/8250/8250_core.c

@@ -508,10 +508,6 @@ static struct uart_8250_port *serial8250_setup_port(int index)
 
 	up->ops = &univ8250_driver_ops;
 
-	if (IS_ENABLED(CONFIG_ALPHA_JENSEN) ||
-	    (IS_ENABLED(CONFIG_ALPHA_GENERIC) && alpha_jensen()))
-		up->port.set_mctrl = alpha_jensen_set_mctrl;
-
 	serial8250_set_defaults(up);
 
 	return up;

drivers/tty/serial/8250/Makefile

@@ -5,8 +5,6 @@
 
 obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250-y					:= 8250_core.o
-8250-$(CONFIG_ALPHA_GENERIC)		+= 8250_alpha.o
-8250-$(CONFIG_ALPHA_JENSEN)		+= 8250_alpha.o
 8250-$(CONFIG_SERIAL_8250_PNP)		+= 8250_pnp.o
 8250_base-y				:= 8250_port.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o

include/linux/blk_types.h

@@ -88,15 +88,9 @@ struct block_device {
 
 /*
  * Block error status values.  See block/blk-core:blk_errors for the details.
- * Alpha cannot write a byte atomically, so we need to use 32-bit value.
  */
-#if defined(CONFIG_ALPHA) && !defined(__alpha_bwx__)
-typedef u32 __bitwise blk_status_t;
-typedef u32 blk_short_t;
-#else
 typedef u8 __bitwise blk_status_t;
 typedef u16 blk_short_t;
-#endif
 #define	BLK_STS_OK 0
 #define BLK_STS_NOTSUPP		((__force blk_status_t)1)
 #define BLK_STS_TIMEOUT		((__force blk_status_t)2)

include/linux/tty.h

@@ -145,15 +145,12 @@ struct tty_operations;
  * @count: count of open processes, reaching zero cancels all the work for
  *	   this tty and drops a @kref too (but does not free this tty)
  * @winsize: size of the terminal "window" (cf. @winsize_mutex)
- * @flow: flow settings grouped together, see also @flow.unused
+ * @flow: flow settings grouped together
  * @flow.lock: lock for @flow members
  * @flow.stopped: tty stopped/started by stop_tty()/start_tty()
  * @flow.tco_stopped: tty stopped/started by %TCOOFF/%TCOON ioctls (it has
  *		      precedence over @flow.stopped)
- * @flow.unused: alignment for Alpha, so that no members other than @flow.* are
- *		 modified by the same 64b word store. The @flow's __aligned is
- *		 there for the very same reason.
- * @ctrl: control settings grouped together, see also @ctrl.unused
+ * @ctrl: control settings grouped together
  * @ctrl.lock: lock for @ctrl members
  * @ctrl.pgrp: process group of this tty (setpgrp(2))
  * @ctrl.session: session of this tty (setsid(2)). Writes are protected by both
@@ -161,7 +158,6 @@ struct tty_operations;
  *		  them.
  * @ctrl.pktstatus: packet mode status (bitwise OR of %TIOCPKT_ constants)
  * @ctrl.packet: packet mode enabled
- * @ctrl.unused: alignment for Alpha, see @flow.unused for explanation
  * @hw_stopped: not controlled by the tty layer, under @driver's control for CTS
  *		handling
  * @receive_room: bytes permitted to feed to @ldisc without any being lost
@@ -216,8 +212,7 @@ struct tty_struct {
 		spinlock_t lock;
 		bool stopped;
 		bool tco_stopped;
-		unsigned long unused[0];
-	} __aligned(sizeof(unsigned long)) flow;
+	} flow;
 
 	struct {
 		struct pid *pgrp;
@@ -225,8 +220,7 @@ struct tty_struct {
 		spinlock_t lock;
 		unsigned char pktstatus;
 		bool packet;
-		unsigned long unused[0];
-	} __aligned(sizeof(unsigned long)) ctrl;
+	} ctrl;
 
 	bool hw_stopped;
 	bool closing;