net: mdio: aspeed: move reg accessing part into separate functions

Add aspeed_mdio_op() and aseed_mdio_get_data() for register accessing.

aspeed_mdio_op() handles operations, write command to control register,
then check and wait operations is finished (bit 31 is cleared).

aseed_mdio_get_data() fetchs the result value of operation from data
register.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/mdio/mdio-aspeed.c

@@ -39,34 +39,35 @@ struct aspeed_mdio {
 	void __iomem *base;
 };
 
-static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
+static int aspeed_mdio_op(struct mii_bus *bus, u8 st, u8 op, u8 phyad, u8 regad,
+			  u16 data)
 {
 	struct aspeed_mdio *ctx = bus->priv;
 	u32 ctrl;
-	u32 data;
-	int rc;
-
-	dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d\n", __func__, addr,
-		regnum);
 
-	/* Just clause 22 for the moment */
-	if (regnum & MII_ADDR_C45)
-		return -EOPNOTSUPP;
+	dev_dbg(&bus->dev, "%s: st: %u op: %u, phyad: %u, regad: %u, data: %u\n",
+		__func__, st, op, phyad, regad, data);
 
 	ctrl = ASPEED_MDIO_CTRL_FIRE
-		| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
-		| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ)
-		| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
-		| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum);
+		| FIELD_PREP(ASPEED_MDIO_CTRL_ST, st)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_OP, op)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, phyad)
+		| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regad)
+		| FIELD_PREP(ASPEED_MDIO_DATA_MIIRDATA, data);
 
 	iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
 
-	rc = readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl,
+	return readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl,
 				!(ctrl & ASPEED_MDIO_CTRL_FIRE),
 				ASPEED_MDIO_INTERVAL_US,
 				ASPEED_MDIO_TIMEOUT_US);
-	if (rc < 0)
-		return rc;
+}
+
+static int aspeed_mdio_get_data(struct mii_bus *bus)
+{
+	struct aspeed_mdio *ctx = bus->priv;
+	int rc;
+	u32 data;
 
 	rc = readl_poll_timeout(ctx->base + ASPEED_MDIO_DATA, data,
 				data & ASPEED_MDIO_DATA_IDLE,
@@ -78,31 +79,36 @@ static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
 	return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data);
 }
 
-static int aspeed_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
+static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum)
 {
-	struct aspeed_mdio *ctx = bus->priv;
-	u32 ctrl;
+	int rc;
 
-	dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d, val: 0x%x\n",
-		__func__, addr, regnum, val);
+	dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d\n", __func__, addr,
+		regnum);
 
 	/* Just clause 22 for the moment */
 	if (regnum & MII_ADDR_C45)
 		return -EOPNOTSUPP;
 
-	ctrl = ASPEED_MDIO_CTRL_FIRE
-		| FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22)
-		| FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE)
-		| FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
-		| FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum)
-		| FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val);
+	rc = aspeed_mdio_op(bus, ASPEED_MDIO_CTRL_ST_C22, MDIO_C22_OP_READ,
+			    addr, regnum, 0);
+	if (rc < 0)
+		return rc;
 
-	iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
+	return aspeed_mdio_get_data(bus);
+}
 
-	return readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl,
-				  !(ctrl & ASPEED_MDIO_CTRL_FIRE),
-				  ASPEED_MDIO_INTERVAL_US,
-				  ASPEED_MDIO_TIMEOUT_US);
+static int aspeed_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
+{
+	dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d, val: 0x%x\n",
+		__func__, addr, regnum, val);
+
+	/* Just clause 22 for the moment */
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	return aspeed_mdio_op(bus, ASPEED_MDIO_CTRL_ST_C22, MDIO_C22_OP_WRITE,
+			      addr, regnum, val);
 }
 
 static int aspeed_mdio_probe(struct platform_device *pdev)