Merge tag 'phy-for-5.5' of...

Merge tag 'phy-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next

Kishon writes:

phy: for 5.5

  *) Add a new PHY driver for USB3 PHY on Allwinner H6 SoC
  *) Add a new PHY driver for Innosilicon Video Combo PHY(MIPI/LVDS/TTL)
  *) Add support in xusb-tegra210 PHY driver to get USB device mode functional
     in Tegra 210
  *) Add support for SM8150 QMP UFS PHY in phy-qcom-qmp PHY driver
  *) Fix smatch warning (array off by one) in phy-rcar-gen2 PHY driver
  *) Enable mac tx internal delay for rgmii-rxid in phy-gmii-sel driver
  *) Fix phy-qcom-usb-hs from registering multiple extcon notifiers during PHY
     power cycle
  *) Use devm_platform_ioremap_resource() in phy-mvebu-a3700-utmi,
     phy-hisi-inno-usb2, phy-histb-combphy and regulator_bulk_set_supply_names()
     in xusb to simplify code
  *) Remove unused variable in xusb-tegra210 and phy-dm816x-usb
  *) Fix sparse warnings in phy-brcm-usb-init
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (28 commits)
  phy: phy-rockchip-inno-usb2: add phy description for px30
  phy: qcom-usb-hs: Fix extcon double register after power cycle
  phy: renesas: phy-rcar-gen2: Fix the array off by one warning
  phy: lantiq: vrx200-pcie: fix error return code in ltq_vrx200_pcie_phy_power_on()
  dt-bindings: phy: add yaml binding for rockchip,px30-dsi-dphy
  phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY
  phy: add PHY_MODE_LVDS
  phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
  dt-bindings: Add bindings for USB3 phy on Allwinner H6
  phy: qcom-qmp: Add SM8150 QMP UFS PHY support
  dt-bindings: phy-qcom-qmp: Add sm8150 UFS phy compatible string
  phy: ti: gmii-sel: fix mac tx internal delay for rgmii-rxid
  phy: tegra: use regulator_bulk_set_supply_names()
  phy: ti: dm816x: remove set but not used variable 'phy_data'
  phy: renesas: rcar-gen3-usb2: Fix sysfs interface of "role"
  phy: tegra: xusb: Add vbus override support on Tegra186
  phy: tegra: xusb: Add vbus override support on Tegra210
  phy: tegra: xusb: Add usb3 port fake support on Tegra210
  phy: tegra: xusb: Add XUSB dual mode support on Tegra210
  dt-bindings: rcar-gen3-phy-usb3: Add r8a774b1 support
  ...

Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Ondrej Jirman <megous@megous.com>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb3-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Allwinner H6 USB3 PHY
+
+maintainers:
+  - Ondrej Jirman <megous@megous.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun50i-h6-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#phy-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+    phy@5210000 {
+          compatible = "allwinner,sun50i-h6-usb3-phy";
+          reg = <0x5210000 0x10000>;
+          clocks = <&ccu CLK_USB_PHY1>;
+          resets = <&ccu RST_USB_PHY1>;
+          #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

@@ -2,6 +2,7 @@ ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
 
 Required properties (phy (parent) node):
  - compatible : should be one of the listed compatibles:
+	* "rockchip,px30-usb2phy"
 	* "rockchip,rk3228-usb2phy"
 	* "rockchip,rk3328-usb2phy"
 	* "rockchip,rk3366-usb2phy"

Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt

@@ -14,7 +14,8 @@ Required properties:
 	       "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
 	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
 	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
-	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845.
+	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
+	       "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
 
 - reg:
   - index 0: address and length of register set for PHY's common
@@ -57,6 +58,8 @@ Required properties:
 			"aux", "cfg_ahb", "ref", "com_aux".
 		For "qcom,sdm845-qmp-ufs-phy" must contain:
 			"ref", "ref_aux".
+		For "qcom,sm8150-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -83,6 +86,8 @@ Required properties:
 			"phy", "common".
 		For "qcom,sdm845-qmp-ufs-phy": must contain:
 			"ufsphy".
+		For "qcom,sm8150-qmp-ufs-phy": must contain:
+			"ufsphy".
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.

Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt

@@ -10,6 +10,8 @@ Required properties:
 	      SoC.
 	      "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
 	      SoC.
+	      "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1
+	      SoC.
 	      "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
 	      SoC.
 	      "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795

Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt

@@ -8,6 +8,8 @@ need this driver.
 
 Required properties:
 - compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
+	      SoC.
+	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
 	      SoC.
 	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
 	      SoC.

Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,px30-dsi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip MIPI DPHY with additional LVDS/TTL modes
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - rockchip,px30-dsi-dphy
+      - rockchip,rk3128-dsi-dphy
+      - rockchip,rk3368-dsi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+      - description: Module clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+
+  reset-names:
+    items:
+      - const: apb
+
+required:
+  - "#phy-cells"
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi_dphy: phy@ff2e0000 {
+        compatible = "rockchip,px30-video-phy";
+        reg = <0x0 0xff2e0000 0x0 0x10000>;
+        clocks = <&pmucru 13>, <&cru 12>;
+        clock-names = "ref", "pclk";
+        #clock-cells = <0>;
+        resets = <&cru 12>;
+        reset-names = "apb";
+        #phy-cells = <0>;
+    };
+
+...

drivers/phy/allwinner/Kconfig

@@ -45,3 +45,14 @@ config PHY_SUN9I_USB
 	  sun9i SoCs.
 
 	  This driver controls each individual USB 2 host PHY.
+
+config PHY_SUN50I_USB3
+	tristate "Allwinner H6 SoC USB3 PHY driver"
+	depends on ARCH_SUNXI && HAS_IOMEM && OF
+	depends on RESET_CONTROLLER
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB3.0-capable transceiver that is
+	  part of Allwinner H6 SoC.
+
+	  This driver controls each individual USB 2+3 host PHY combo.

drivers/phy/allwinner/Makefile

@@ -2,3 +2,4 @@
 obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
 obj-$(CONFIG_PHY_SUN6I_MIPI_DPHY)	+= phy-sun6i-mipi-dphy.o
 obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
+obj-$(CONFIG_PHY_SUN50I_USB3)		+= phy-sun50i-usb3.o

drivers/phy/allwinner/phy-sun50i-usb3.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Allwinner sun50i(H6) USB 3.0 phy driver
+ *
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on phy-sun9i-usb.c, which is:
+ *
+ * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on code from Allwinner BSP, which is:
+ *
+ * Copyright (c) 2010-2015 Allwinner Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+/* Interface Status and Control Registers */
+#define SUNXI_ISCR			0x00
+#define SUNXI_PIPE_CLOCK_CONTROL	0x14
+#define SUNXI_PHY_TUNE_LOW		0x18
+#define SUNXI_PHY_TUNE_HIGH		0x1c
+#define SUNXI_PHY_EXTERNAL_CONTROL	0x20
+
+/* USB2.0 Interface Status and Control Register */
+#define SUNXI_ISCR_FORCE_VBUS		(3 << 12)
+
+/* PIPE Clock Control Register */
+#define SUNXI_PCC_PIPE_CLK_OPEN		(1 << 6)
+
+/* PHY External Control Register */
+#define SUNXI_PEC_EXTERN_VBUS		(3 << 1)
+#define SUNXI_PEC_SSC_EN		(1 << 24)
+#define SUNXI_PEC_REF_SSP_EN		(1 << 26)
+
+/* PHY Tune High Register */
+#define SUNXI_TX_DEEMPH_3P5DB(n)	((n) << 19)
+#define SUNXI_TX_DEEMPH_3P5DB_MASK	GENMASK(24, 19)
+#define SUNXI_TX_DEEMPH_6DB(n)		((n) << 13)
+#define SUNXI_TX_DEEMPH_6GB_MASK	GENMASK(18, 13)
+#define SUNXI_TX_SWING_FULL(n)		((n) << 6)
+#define SUNXI_TX_SWING_FULL_MASK	GENMASK(12, 6)
+#define SUNXI_LOS_BIAS(n)		((n) << 3)
+#define SUNXI_LOS_BIAS_MASK		GENMASK(5, 3)
+#define SUNXI_TXVBOOSTLVL(n)		((n) << 0)
+#define SUNXI_TXVBOOSTLVL_MASK		GENMASK(0, 2)
+
+struct sun50i_usb3_phy {
+	struct phy *phy;
+	void __iomem *regs;
+	struct reset_control *reset;
+	struct clk *clk;
+};
+
+static void sun50i_usb3_phy_open(struct sun50i_usb3_phy *phy)
+{
+	u32 val;
+
+	val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
+	val |= SUNXI_PEC_EXTERN_VBUS;
+	val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN;
+	writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
+
+	val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
+	val |= SUNXI_PCC_PIPE_CLK_OPEN;
+	writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
+
+	val = readl(phy->regs + SUNXI_ISCR);
+	val |= SUNXI_ISCR_FORCE_VBUS;
+	writel(val, phy->regs + SUNXI_ISCR);
+
+	/*
+	 * All the magic numbers written to the PHY_TUNE_{LOW_HIGH}
+	 * registers are directly taken from the BSP USB3 driver from
+	 * Allwiner.
+	 */
+	writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW);
+
+	val = readl(phy->regs + SUNXI_PHY_TUNE_HIGH);
+	val &= ~(SUNXI_TXVBOOSTLVL_MASK | SUNXI_LOS_BIAS_MASK |
+		 SUNXI_TX_SWING_FULL_MASK | SUNXI_TX_DEEMPH_6GB_MASK |
+		 SUNXI_TX_DEEMPH_3P5DB_MASK);
+	val |= SUNXI_TXVBOOSTLVL(0x7);
+	val |= SUNXI_LOS_BIAS(0x7);
+	val |= SUNXI_TX_SWING_FULL(0x55);
+	val |= SUNXI_TX_DEEMPH_6DB(0x20);
+	val |= SUNXI_TX_DEEMPH_3P5DB(0x15);
+	writel(val, phy->regs + SUNXI_PHY_TUNE_HIGH);
+}
+
+static int sun50i_usb3_phy_init(struct phy *_phy)
+{
+	struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
+	int ret;
+
+	ret = clk_prepare_enable(phy->clk);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(phy->reset);
+	if (ret) {
+		clk_disable_unprepare(phy->clk);
+		return ret;
+	}
+
+	sun50i_usb3_phy_open(phy);
+	return 0;
+}
+
+static int sun50i_usb3_phy_exit(struct phy *_phy)
+{
+	struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
+
+	reset_control_assert(phy->reset);
+	clk_disable_unprepare(phy->clk);
+
+	return 0;
+}
+
+static const struct phy_ops sun50i_usb3_phy_ops = {
+	.init		= sun50i_usb3_phy_init,
+	.exit		= sun50i_usb3_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int sun50i_usb3_phy_probe(struct platform_device *pdev)
+{
+	struct sun50i_usb3_phy *phy;
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(phy->clk)) {
+		if (PTR_ERR(phy->clk) != -EPROBE_DEFER)
+			dev_err(dev, "failed to get phy clock\n");
+		return PTR_ERR(phy->clk);
+	}
+
+	phy->reset = devm_reset_control_get(dev, NULL);
+	if (IS_ERR(phy->reset)) {
+		dev_err(dev, "failed to get reset control\n");
+		return PTR_ERR(phy->reset);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->regs))
+		return PTR_ERR(phy->regs);
+
+	phy->phy = devm_phy_create(dev, NULL, &sun50i_usb3_phy_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(phy->phy);
+	}
+
+	phy_set_drvdata(phy->phy, phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id sun50i_usb3_phy_of_match[] = {
+	{ .compatible = "allwinner,sun50i-h6-usb3-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sun50i_usb3_phy_of_match);
+
+static struct platform_driver sun50i_usb3_phy_driver = {
+	.probe	= sun50i_usb3_phy_probe,
+	.driver = {
+		.of_match_table	= sun50i_usb3_phy_of_match,
+		.name  = "sun50i-usb3-phy",
+	}
+};
+module_platform_driver(sun50i_usb3_phy_driver);
+
+MODULE_DESCRIPTION("Allwinner H6 USB 3.0 phy driver");
+MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
+MODULE_LICENSE("GPL");

drivers/phy/broadcom/phy-brcm-usb-init.c

@@ -126,8 +126,8 @@ enum {
 	USB_CTRL_SELECTOR_COUNT,
 };
 
-#define USB_CTRL_REG(base, reg)	((void *)base + USB_CTRL_##reg)
-#define USB_XHCI_EC_REG(base, reg) ((void *)base + USB_XHCI_EC_##reg)
+#define USB_CTRL_REG(base, reg)	((void __iomem *)base + USB_CTRL_##reg)
+#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
 #define USB_CTRL_MASK(reg, field) \
 	USB_CTRL_##reg##_##field##_MASK
 #define USB_CTRL_MASK_FAMILY(params, reg, field)			\
@@ -416,7 +416,7 @@ void usb_ctrl_unset_family(struct brcm_usb_init_params *params,
 			   u32 reg_offset, u32 field)
 {
 	u32 mask;
-	void *reg;
+	void __iomem *reg;
 
 	mask = params->usb_reg_bits_map[field];
 	reg = params->ctrl_regs + reg_offset;
@@ -428,7 +428,7 @@ void usb_ctrl_set_family(struct brcm_usb_init_params *params,
 			 u32 reg_offset, u32 field)
 {
 	u32 mask;
-	void *reg;
+	void __iomem *reg;
 
 	mask = params->usb_reg_bits_map[field];
 	reg = params->ctrl_regs + reg_offset;
@@ -707,7 +707,7 @@ static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params)
 	void __iomem *xhci_ec_base = params->xhci_ec_regs;
 	u32 val;
 
-	if (params->family_id != 0x74371000 || xhci_ec_base == 0)
+	if (params->family_id != 0x74371000 || !xhci_ec_base)
 		return;
 	brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
 	val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));

drivers/phy/hisilicon/phy-hisi-inno-usb2.c

@@ -114,7 +114,6 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 	struct hisi_inno_phy_priv *priv;
 	struct phy_provider *provider;
 	struct device_node *child;
-	struct resource *res;
 	int i = 0;
 	int ret;
 
@@ -122,8 +121,7 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->mmio = devm_ioremap_resource(dev, res);
+	priv->mmio = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->mmio)) {
 		ret = PTR_ERR(priv->mmio);
 		return ret;

drivers/phy/hisilicon/phy-histb-combphy.c

@@ -195,7 +195,6 @@ static int histb_combphy_probe(struct platform_device *pdev)
 	struct histb_combphy_priv *priv;
 	struct device_node *np = dev->of_node;
 	struct histb_combphy_mode *mode;
-	struct resource *res;
 	u32 vals[3];
 	int ret;
 
@@ -203,8 +202,7 @@ static int histb_combphy_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->mmio = devm_ioremap_resource(dev, res);
+	priv->mmio = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->mmio)) {
 		ret = PTR_ERR(priv->mmio);
 		return ret;

drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c

@@ -323,7 +323,8 @@ static int ltq_vrx200_pcie_phy_power_on(struct phy *phy)
 		goto err_disable_pdi_clk;
 
 	/* Check if we are in "startup ready" status */
-	if (ltq_vrx200_pcie_phy_wait_for_pll(phy) != 0)
+	ret = ltq_vrx200_pcie_phy_wait_for_pll(phy);
+	if (ret)
 		goto err_disable_phy_clk;
 
 	ltq_vrx200_pcie_phy_apply_workarounds(phy);

drivers/phy/marvell/phy-mvebu-a3700-utmi.c

@@ -216,20 +216,13 @@ static int mvebu_a3700_utmi_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mvebu_a3700_utmi *utmi;
 	struct phy_provider *provider;
-	struct resource *res;
 
 	utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
 	if (!utmi)
 		return -ENOMEM;
 
 	/* Get UTMI memory region */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "Missing UTMI PHY memory resource\n");
-		return -ENODEV;
-	}
-
-	utmi->regs = devm_ioremap_resource(dev, res);
+	utmi->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(utmi->regs))
 		return PTR_ERR(utmi->regs);
 

drivers/phy/phy-xgene.c

@@ -1342,7 +1342,7 @@ static int xgene_phy_hw_initialize(struct xgene_phy_ctx *ctx,
 static void xgene_phy_force_lat_summer_cal(struct xgene_phy_ctx *ctx, int lane)
 {
 	int i;
-	struct {
+	static const struct {
 		u32 reg;
 		u32 val;
 	} serdes_reg[] = {

drivers/phy/qualcomm/phy-qcom-qmp.c

@@ -165,6 +165,11 @@ static const unsigned int sdm845_ufsphy_regs_layout[] = {
 	[QPHY_PCS_READY_STATUS]		= 0x160,
 };
 
+static const unsigned int sm8150_ufsphy_regs_layout[] = {
+	[QPHY_START_CTRL]		= 0x00,
+	[QPHY_PCS_READY_STATUS]		= 0x180,
+};
+
 static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -879,6 +884,93 @@ static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
 };
 
+static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xac),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd),
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
+
+	/* Rate B */
+	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_BAND, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0xf1),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x1b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xf6),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x3d),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xe0),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb1),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_LOW, 0xe0),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b),
+	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1),
+
+};
+
+static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_RX_SIGDET_CTRL2, 0x6d),
+	QMP_PHY_INIT_CFG(QPHY_V4_TX_LARGE_AMP_DRV_LVL, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V4_TX_SMALL_AMP_DRV_LVL, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V4_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V4_DEBUG_BUS_CLKSEL, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V4_RX_MIN_HIBERN8_TIME, 0xff),
+	QMP_PHY_INIT_CFG(QPHY_V4_MULTI_LANE_CTRL1, 0x02),
+};
 
 /* struct qmp_phy_cfg - per-PHY initialization config */
 struct qmp_phy_cfg {
@@ -1276,6 +1368,31 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
 	.is_dual_lane_phy       = true,
 };
 
+static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
+	.type			= PHY_TYPE_UFS,
+	.nlanes			= 2,
+
+	.serdes_tbl		= sm8150_ufsphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8150_ufsphy_serdes_tbl),
+	.tx_tbl			= sm8150_ufsphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8150_ufsphy_tx_tbl),
+	.rx_tbl			= sm8150_ufsphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8150_ufsphy_rx_tbl),
+	.pcs_tbl		= sm8150_ufsphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8150_ufsphy_pcs_tbl),
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= sm8150_ufsphy_regs_layout,
+
+	.start_ctrl		= SERDES_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+
+	.is_dual_lane_phy	= true,
+	.no_pcs_sw_reset	= true,
+};
+
 static void qcom_qmp_phy_configure(void __iomem *base,
 				   const unsigned int *regs,
 				   const struct qmp_phy_init_tbl tbl[],
@@ -1998,6 +2115,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,msm8998-qmp-usb3-phy",
 		.data = &msm8998_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,sm8150-qmp-ufs-phy",
+		.data = &sm8150_ufsphy_cfg,
 	},
 	{ },
 };

drivers/phy/qualcomm/phy-qcom-qmp.h

@@ -313,4 +313,100 @@
 #define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4		0x5c
 #define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5		0x60
 
+/* Only for QMP V4 PHY - QSERDES COM registers */
+#define QSERDES_V4_COM_PLL_IVCO				0x058
+#define QSERDES_V4_COM_CMN_IPTRIM			0x060
+#define QSERDES_V4_COM_CP_CTRL_MODE0			0x074
+#define QSERDES_V4_COM_CP_CTRL_MODE1			0x078
+#define QSERDES_V4_COM_PLL_RCTRL_MODE0			0x07c
+#define QSERDES_V4_COM_PLL_RCTRL_MODE1			0x080
+#define QSERDES_V4_COM_PLL_CCTRL_MODE0			0x084
+#define QSERDES_V4_COM_PLL_CCTRL_MODE1			0x088
+#define QSERDES_V4_COM_SYSCLK_EN_SEL			0x094
+#define QSERDES_V4_COM_LOCK_CMP_EN			0x0a4
+#define QSERDES_V4_COM_LOCK_CMP1_MODE0			0x0ac
+#define QSERDES_V4_COM_LOCK_CMP2_MODE0			0x0b0
+#define QSERDES_V4_COM_LOCK_CMP1_MODE1			0x0b4
+#define QSERDES_V4_COM_DEC_START_MODE0			0x0bc
+#define QSERDES_V4_COM_LOCK_CMP2_MODE1			0x0b8
+#define QSERDES_V4_COM_DEC_START_MODE1			0x0c4
+#define QSERDES_V4_COM_VCO_TUNE_MAP			0x10c
+#define QSERDES_V4_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V4_COM_HSCLK_SEL			0x158
+#define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL		0x15c
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x1ac
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x1b0
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1	0x1b4
+#define QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL		0x1bc
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1	0x1b8
+
+/* Only for QMP V4 PHY - TX registers */
+#define QSERDES_V4_TX_LANE_MODE_1			0x84
+#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0xd8
+#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0xdC
+#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0xe0
+#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0xe4
+#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN			0xb8
+
+/* Only for QMP V4 PHY - RX registers */
+#define QSERDES_V4_RX_UCDR_FO_GAIN			0x008
+#define QSERDES_V4_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN		0x030
+#define QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V4_RX_UCDR_PI_CONTROLS			0x044
+#define QSERDES_V4_RX_UCDR_PI_CTRL2			0x048
+#define QSERDES_V4_RX_AC_JTAG_ENABLE			0x068
+#define QSERDES_V4_RX_AC_JTAG_MODE			0x078
+#define QSERDES_V4_RX_RX_TERM_BW			0x080
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2		0x0ec
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3		0x0f0
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4		0x0f4
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW		0x0f8
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH		0x0fc
+#define QSERDES_V4_RX_RX_IDAC_MEASURE_TIME		0x100
+#define QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x114
+#define QSERDES_V4_RX_SIGDET_CNTRL			0x11c
+#define QSERDES_V4_RX_SIGDET_LVL			0x120
+#define QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL		0x124
+#define QSERDES_V4_RX_RX_BAND				0x128
+#define QSERDES_V4_RX_RX_MODE_00_LOW			0x170
+#define QSERDES_V4_RX_RX_MODE_00_HIGH			0x174
+#define QSERDES_V4_RX_RX_MODE_00_HIGH2			0x178
+#define QSERDES_V4_RX_RX_MODE_00_HIGH3			0x17c
+#define QSERDES_V4_RX_RX_MODE_00_HIGH4			0x180
+#define QSERDES_V4_RX_RX_MODE_01_LOW			0x184
+#define QSERDES_V4_RX_RX_MODE_01_HIGH			0x188
+#define QSERDES_V4_RX_RX_MODE_01_HIGH2			0x18c
+#define QSERDES_V4_RX_RX_MODE_01_HIGH3			0x190
+#define QSERDES_V4_RX_RX_MODE_01_HIGH4			0x194
+#define QSERDES_V4_RX_RX_MODE_10_LOW			0x198
+#define QSERDES_V4_RX_RX_MODE_10_HIGH			0x19c
+#define QSERDES_V4_RX_RX_MODE_10_HIGH2			0x1a0
+#define QSERDES_V4_RX_RX_MODE_10_HIGH3			0x1a4
+#define QSERDES_V4_RX_RX_MODE_10_HIGH4			0x1a8
+#define QSERDES_V4_RX_DCC_CTRL1				0x1bc
+
+/* Only for QMP V4 PHY - PCS registers */
+#define QPHY_V4_PHY_START				0x000
+#define QPHY_V4_POWER_DOWN_CONTROL			0x004
+#define QPHY_V4_SW_RESET				0x008
+#define QPHY_V4_TIMER_20US_CORECLK_STEPS_MSB		0x00c
+#define QPHY_V4_TIMER_20US_CORECLK_STEPS_LSB		0x010
+#define QPHY_V4_PLL_CNTL				0x02c
+#define QPHY_V4_TX_LARGE_AMP_DRV_LVL			0x030
+#define QPHY_V4_TX_SMALL_AMP_DRV_LVL			0x038
+#define QPHY_V4_BIST_FIXED_PAT_CTRL			0x060
+#define QPHY_V4_TX_HSGEAR_CAPABILITY			0x074
+#define QPHY_V4_RX_HSGEAR_CAPABILITY			0x0b4
+#define QPHY_V4_DEBUG_BUS_CLKSEL			0x124
+#define QPHY_V4_LINECFG_DISABLE				0x148
+#define QPHY_V4_RX_MIN_HIBERN8_TIME			0x150
+#define QPHY_V4_RX_SIGDET_CTRL2				0x158
+#define QPHY_V4_TX_PWM_GEAR_BAND			0x160
+#define QPHY_V4_TX_HS_GEAR_BAND				0x168
+#define QPHY_V4_PCS_READY_STATUS			0x180
+#define QPHY_V4_TX_MID_TERM_CTRL1			0x1d8
+#define QPHY_V4_MULTI_LANE_CTRL1			0x1e0
+
 #endif

drivers/phy/qualcomm/phy-qcom-usb-hs.c

@@ -158,8 +158,8 @@ static int qcom_usb_hs_phy_power_on(struct phy *phy)
 		/* setup initial state */
 		qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
 					      uphy->vbus_edev);
-		ret = devm_extcon_register_notifier(&ulpi->dev, uphy->vbus_edev,
-				EXTCON_USB, &uphy->vbus_notify);
+		ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+					       &uphy->vbus_notify);
 		if (ret)
 			goto err_ulpi;
 	}
@@ -180,6 +180,9 @@ static int qcom_usb_hs_phy_power_off(struct phy *phy)
 {
 	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
 
+	if (uphy->vbus_edev)
+		extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+					   &uphy->vbus_notify);
 	regulator_disable(uphy->v3p3);
 	regulator_disable(uphy->v1p8);
 	clk_disable_unprepare(uphy->sleep_clk);

drivers/phy/renesas/phy-rcar-gen2.c

@@ -71,6 +71,7 @@ struct rcar_gen2_phy_driver {
 struct rcar_gen2_phy_data {
 	const struct phy_ops *gen2_phy_ops;
 	const u32 (*select_value)[PHYS_PER_CHANNEL];
+	const u32 num_channels;
 };
 
 static int rcar_gen2_phy_init(struct phy *p)
@@ -271,11 +272,13 @@ static const u32 usb20_select_value[][PHYS_PER_CHANNEL] = {
 static const struct rcar_gen2_phy_data rcar_gen2_usb_phy_data = {
 	.gen2_phy_ops = &rcar_gen2_phy_ops,
 	.select_value = pci_select_value,
+	.num_channels = ARRAY_SIZE(pci_select_value),
 };
 
 static const struct rcar_gen2_phy_data rz_g1c_usb_phy_data = {
 	.gen2_phy_ops = &rz_g1c_phy_ops,
 	.select_value = usb20_select_value,
+	.num_channels = ARRAY_SIZE(usb20_select_value),
 };
 
 static const struct of_device_id rcar_gen2_phy_match_table[] = {
@@ -389,7 +392,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
 		channel->selected_phy = -1;
 
 		error = of_property_read_u32(np, "reg", &channel_num);
-		if (error || channel_num > 2) {
+		if (error || channel_num >= data->num_channels) {
 			dev_err(dev, "Invalid \"reg\" property\n");
 			of_node_put(np);
 			return error;

drivers/phy/renesas/phy-rcar-gen3-usb2.c

@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/string.h>
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
@@ -320,9 +321,9 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr,
 	if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
 		return -EIO;
 
-	if (!strncmp(buf, "host", strlen("host")))
+	if (sysfs_streq(buf, "host"))
 		new_mode = PHY_MODE_USB_HOST;
-	else if (!strncmp(buf, "peripheral", strlen("peripheral")))
+	else if (sysfs_streq(buf, "peripheral"))
 		new_mode = PHY_MODE_USB_DEVICE;
 	else
 		return -EINVAL;
@@ -614,7 +615,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 		return PTR_ERR(channel->base);
 
 	/* call request_irq for OTG */
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq >= 0) {
 		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
 		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,

drivers/phy/rockchip/Kconfig

@@ -35,6 +35,14 @@ config PHY_ROCKCHIP_INNO_USB2
 	help
 	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
 
+config PHY_ROCKCHIP_INNO_DSIDPHY
+	tristate "Rockchip Innosilicon MIPI/LVDS/TTL PHY driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip MIPI/LVDS/TTL PHY with
+	  Innosilicon IP block.
+
 config PHY_ROCKCHIP_PCIE
 	tristate "Rockchip PCIe PHY Driver"
 	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST

drivers/phy/rockchip/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC)		+= phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY)	+= phy-rockchip-inno-dsidphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o

drivers/phy/rockchip/phy-rockchip-inno-usb2.c

@@ -1423,6 +1423,7 @@ static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 };
 
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+	{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },

drivers/phy/tegra/xusb-tegra186.c

@@ -857,9 +857,32 @@ static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
 {
 }
 
+static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
+					       bool status)
+{
+	u32 value;
+
+	dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
+
+	value = padctl_readl(padctl, USB2_VBUS_ID);
+
+	if (status) {
+		value |= VBUS_OVERRIDE;
+		value &= ~ID_OVERRIDE(~0);
+		value |= ID_OVERRIDE_FLOATING;
+	} else {
+		value &= ~VBUS_OVERRIDE;
+	}
+
+	padctl_writel(padctl, value, USB2_VBUS_ID);
+
+	return 0;
+}
+
 static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
 	.probe = tegra186_xusb_padctl_probe,
 	.remove = tegra186_xusb_padctl_remove,
+	.vbus_override = tegra186_xusb_padctl_vbus_override,
 };
 
 static const char * const tegra186_xusb_padctl_supply_names[] = {

drivers/phy/tegra/xusb-tegra210.c

@@ -39,7 +39,10 @@
 #define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB 0x1
 
 #define XUSB_PADCTL_USB2_PORT_CAP 0x008
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(x) (0x0 << ((x) * 4))
 #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(x) (0x1 << ((x) * 4))
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(x) (0x2 << ((x) * 4))
+#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(x) (0x3 << ((x) * 4))
 #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(x) (0x3 << ((x) * 4))
 
 #define XUSB_PADCTL_SS_PORT_MAP 0x014
@@ -47,6 +50,7 @@
 #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_SHIFT(x) ((x) * 5)
 #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(x) (0x7 << ((x) * 5))
 #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5))
+#define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7
 
 #define XUSB_PADCTL_ELPG_PROGRAM1 0x024
 #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31)
@@ -61,9 +65,14 @@
 #define XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(x) (1 << (1 + (x)))
 #define XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(x) (1 << (8 + (x)))
 
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(x) (0x080 + (x) * 0x40)
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP (1 << 18)
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN (1 << 22)
+
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
+#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
 #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
 
 #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
@@ -222,6 +231,12 @@
 #define XUSB_PADCTL_UPHY_USB3_PADX_ECTL6(x) (0xa74 + (x) * 0x40)
 #define XUSB_PADCTL_UPHY_USB3_PAD_ECTL6_RX_EQ_CTRL_H_VAL 0xfcf01368
 
+#define XUSB_PADCTL_USB2_VBUS_ID 0xc60
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON (1 << 14)
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT 18
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK 0xf
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8
+
 struct tegra210_xusb_fuse_calibration {
 	u32 hs_curr_level[4];
 	u32 hs_term_range_adj;
@@ -940,6 +955,34 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	priv = to_tegra210_xusb_padctl(padctl);
 
+	if (port->usb3_port_fake != -1) {
+		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
+		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
+					port->usb3_port_fake);
+		value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(
+					port->usb3_port_fake, index);
+		padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(100, 200);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(100, 200);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+	}
+
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
 	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_MASK <<
 		    XUSB_PADCTL_USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL_SHIFT) |
@@ -957,7 +1000,14 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
 	value &= ~XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(index);
+	if (port->mode == USB_DR_MODE_UNKNOWN)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(index);
+	else if (port->mode == USB_DR_MODE_PERIPHERAL)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(index);
+	else if (port->mode == USB_DR_MODE_HOST)
 		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
+	else if (port->mode == USB_DR_MODE_OTG)
+		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(index);
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
@@ -989,7 +1039,12 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 	value &= ~(XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK <<
 		   XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT);
+	if (port->mode == USB_DR_MODE_HOST)
 		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
+	else
+		value |=
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL <<
+		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT;
 	padctl_writel(padctl, value,
 		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 
@@ -1062,6 +1117,32 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 
 	mutex_lock(&padctl->lock);
 
+	if (port->usb3_port_fake != -1) {
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(100, 200);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		usleep_range(250, 350);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_VCORE_DOWN(
+					port->usb3_port_fake);
+		padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
+		value |= XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(port->usb3_port_fake,
+					XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED);
+		padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
+	}
+
 	if (WARN_ON(pad->enable == 0))
 		goto out;
 
@@ -1225,13 +1306,10 @@ static int tegra210_hsic_phy_power_on(struct phy *phy)
 	struct tegra_xusb_hsic_lane *hsic = to_hsic_lane(lane);
 	struct tegra_xusb_hsic_pad *pad = to_hsic_pad(lane->pad);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	struct tegra210_xusb_padctl *priv;
 	unsigned int index = lane->index;
 	u32 value;
 	int err;
 
-	priv = to_tegra210_xusb_padctl(padctl);
-
 	err = regulator_enable(pad->supply);
 	if (err)
 		return err;
@@ -1945,6 +2023,52 @@ static const struct tegra_xusb_port_ops tegra210_usb3_port_ops = {
 	.map = tegra210_usb3_port_map,
 };
 
+static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
+					      bool status)
+{
+	u32 value;
+
+	dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
+
+	if (status) {
+		value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
+		value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
+			   XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
+		value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
+			 XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
+	} else {
+		value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
+	}
+
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
+
+	return 0;
+}
+
+static int tegra210_utmi_port_reset(struct phy *phy)
+{
+	struct tegra_xusb_padctl *padctl;
+	struct tegra_xusb_lane *lane;
+	u32 value;
+
+	lane = phy_get_drvdata(phy);
+	padctl = lane->pad->padctl;
+
+	value = padctl_readl(padctl,
+		     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL0(lane->index));
+
+	if ((value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIP) ||
+	    (value & XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL0_ZIN)) {
+		tegra210_xusb_padctl_vbus_override(padctl, false);
+		tegra210_xusb_padctl_vbus_override(padctl, true);
+		return 1;
+	}
+
+	return 0;
+}
+
 static int
 tegra210_xusb_read_fuse_calibration(struct tegra210_xusb_fuse_calibration *fuse)
 {
@@ -2007,6 +2131,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.remove = tegra210_xusb_padctl_remove,
 	.usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect,
 	.hsic_set_idle = tegra210_hsic_set_idle,
+	.vbus_override = tegra210_xusb_padctl_vbus_override,
+	.utmi_port_reset = tegra210_utmi_port_reset,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
@@ -2036,6 +2162,7 @@ const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = {
 	.ops = &tegra210_xusb_padctl_ops,
 	.supply_names = tegra210_xusb_padctl_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra210_xusb_padctl_supply_names),
+	.need_fake_usb3_port = true,
 };
 EXPORT_SYMBOL_GPL(tegra210_xusb_padctl_soc);
 

drivers/phy/tegra/xusb.c

@@ -800,9 +800,62 @@ static void __tegra_xusb_remove_ports(struct tegra_xusb_padctl *padctl)
 	}
 }
 
+static int tegra_xusb_find_unused_usb3_port(struct tegra_xusb_padctl *padctl)
+{
+	struct device_node *np;
+	unsigned int i;
+
+	for (i = 0; i < padctl->soc->ports.usb3.count; i++) {
+		np = tegra_xusb_find_port_node(padctl, "usb3", i);
+		if (!np || !of_device_is_available(np))
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+static bool tegra_xusb_port_is_companion(struct tegra_xusb_usb2_port *usb2)
+{
+	unsigned int i;
+	struct tegra_xusb_usb3_port *usb3;
+	struct tegra_xusb_padctl *padctl = usb2->base.padctl;
+
+	for (i = 0; i < padctl->soc->ports.usb3.count; i++) {
+		usb3 = tegra_xusb_find_usb3_port(padctl, i);
+		if (usb3 && usb3->port == usb2->base.index)
+			return true;
+	}
+
+	return false;
+}
+
+static int tegra_xusb_update_usb3_fake_port(struct tegra_xusb_usb2_port *usb2)
+{
+	int fake;
+
+	/* Disable usb3_port_fake usage by default and assign if needed */
+	usb2->usb3_port_fake = -1;
+
+	if ((usb2->mode == USB_DR_MODE_OTG ||
+	     usb2->mode == USB_DR_MODE_PERIPHERAL) &&
+		!tegra_xusb_port_is_companion(usb2)) {
+		fake = tegra_xusb_find_unused_usb3_port(usb2->base.padctl);
+		if (fake < 0) {
+			dev_err(&usb2->base.dev, "no unused USB3 ports available\n");
+			return -ENODEV;
+		}
+
+		dev_dbg(&usb2->base.dev, "Found unused usb3 port: %d\n", fake);
+		usb2->usb3_port_fake = fake;
+	}
+
+	return 0;
+}
+
 static int tegra_xusb_setup_ports(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_port *port;
+	struct tegra_xusb_usb2_port *usb2;
 	unsigned int i;
 	int err = 0;
 
@@ -832,6 +885,18 @@ static int tegra_xusb_setup_ports(struct tegra_xusb_padctl *padctl)
 			goto remove_ports;
 	}
 
+	if (padctl->soc->need_fake_usb3_port) {
+		for (i = 0; i < padctl->soc->ports.usb2.count; i++) {
+			usb2 = tegra_xusb_find_usb2_port(padctl, i);
+			if (!usb2)
+				continue;
+
+			err = tegra_xusb_update_usb3_fake_port(usb2);
+			if (err < 0)
+				goto remove_ports;
+		}
+	}
+
 	list_for_each_entry(port, &padctl->ports, list) {
 		err = port->ops->enable(port);
 		if (err < 0)
@@ -862,7 +927,6 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 	struct tegra_xusb_padctl *padctl;
 	const struct of_device_id *match;
 	struct resource *res;
-	unsigned int i;
 	int err;
 
 	/* for backwards compatibility with old device trees */
@@ -907,8 +971,9 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
 		goto remove;
 	}
 
-	for (i = 0; i < padctl->soc->num_supplies; i++)
-		padctl->supplies[i].supply = padctl->soc->supply_names[i];
+	regulator_bulk_set_supply_names(padctl->supplies,
+					padctl->soc->supply_names,
+					padctl->soc->num_supplies);
 
 	err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
 				      padctl->supplies);
@@ -1056,6 +1121,28 @@ int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
 }
 EXPORT_SYMBOL_GPL(tegra_xusb_padctl_usb3_set_lfps_detect);
 
+int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
+							bool val)
+{
+	if (padctl->soc->ops->vbus_override)
+		return padctl->soc->ops->vbus_override(padctl, val);
+
+	return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_xusb_padctl_set_vbus_override);
+
+int tegra_phy_xusb_utmi_port_reset(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+
+	if (padctl->soc->ops->utmi_port_reset)
+		return padctl->soc->ops->utmi_port_reset(phy);
+
+	return -ENOTSUPP;
+}
+EXPORT_SYMBOL_GPL(tegra_phy_xusb_utmi_port_reset);
+
 MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
 MODULE_DESCRIPTION("Tegra XUSB Pad Controller driver");
 MODULE_LICENSE("GPL v2");

drivers/phy/tegra/xusb.h

@@ -291,6 +291,7 @@ struct tegra_xusb_usb2_port {
 	struct regulator *supply;
 	enum usb_dr_mode mode;
 	bool internal;
+	int usb3_port_fake;
 };
 
 static inline struct tegra_xusb_usb2_port *
@@ -372,6 +373,8 @@ struct tegra_xusb_padctl_ops {
 			     unsigned int index, bool idle);
 	int (*usb3_set_lfps_detect)(struct tegra_xusb_padctl *padctl,
 				    unsigned int index, bool enable);
+	int (*vbus_override)(struct tegra_xusb_padctl *padctl, bool set);
+	int (*utmi_port_reset)(struct phy *phy);
 };
 
 struct tegra_xusb_padctl_soc {
@@ -389,6 +392,7 @@ struct tegra_xusb_padctl_soc {
 
 	const char * const *supply_names;
 	unsigned int num_supplies;
+	bool need_fake_usb3_port;
 };
 
 struct tegra_xusb_padctl {

drivers/phy/ti/phy-dm816x-usb.c

@@ -189,7 +189,6 @@ static int dm816x_usb_phy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct usb_otg *otg;
 	const struct of_device_id *of_id;
-	const struct usb_phy_data *phy_data;
 	int error;
 
 	of_id = of_match_device(of_match_ptr(dm816x_usb_phy_id_table),
@@ -220,8 +219,6 @@ static int dm816x_usb_phy_probe(struct platform_device *pdev)
 	if (phy->usbphy_ctrl == 0x2c)
 		phy->instance = 1;
 
-	phy_data = of_id->data;
-
 	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
 	if (!otg)
 		return -ENOMEM;

drivers/phy/ti/phy-gmii-sel.c

@@ -69,11 +69,11 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
 		break;
 
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 		gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
 		break;
 
 	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
 		rgmii_id = 1;

include/linux/phy/phy.h

@@ -38,7 +38,8 @@ enum phy_mode {
 	PHY_MODE_PCIE,
 	PHY_MODE_ETHERNET,
 	PHY_MODE_MIPI_DPHY,
-	PHY_MODE_SATA
+	PHY_MODE_SATA,
+	PHY_MODE_LVDS,
 };
 
 /**

include/linux/phy/tegra/xusb.h

@@ -18,5 +18,7 @@ int tegra_xusb_padctl_hsic_set_idle(struct tegra_xusb_padctl *padctl,
 				    unsigned int port, bool idle);
 int tegra_xusb_padctl_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
 					   unsigned int port, bool enable);
-
+int tegra_xusb_padctl_set_vbus_override(struct tegra_xusb_padctl *padctl,
+					bool val);
+int tegra_phy_xusb_utmi_port_reset(struct phy *phy);
 #endif /* PHY_TEGRA_XUSB_H */