Skip to content

L
linux
Commit 743c8fbb authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

ARM: s3c: remove most s3c64xx board support 

All traditional board files except for MACH_WLF_CRAGG_6410 were
marked as unused, so remove them now.

Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 1ea35b35
Expand all Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 3226 deletions
arch/arm/mach-s3c/Kconfig.s3c64xx
View file @ 743c8fbb
......@@ -54,17 +54,6 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
config S3C64XX_DEV_ONENAND1
bool
help
Compile in platform device definition for OneNAND1 controller
config SAMSUNG_DEV_BACKLIGHT
bool
depends on SAMSUNG_DEV_PWM
help
Compile in platform device definition LCD backlight with PWM Timer
# platform specific device setup
config S3C64XX_SETUP_I2C0
......@@ -113,201 +102,6 @@ config S3C64XX_SETUP_USB_PHY
# S36400 Macchine support
config MACH_SMDK6400
bool "SMDK6400"
depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6400
select S3C64XX_SETUP_SDHCI
select S3C_DEV_HSMMC1
help
Machine support for the Samsung SMDK6400
# S3C6410 machine support
config MACH_ANW6410
bool "A&W6410"
depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
help
Machine support for the A&W6410
config MACH_MINI6410
bool "MINI6410"
depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
help
Machine support for the FriendlyARM MINI6410
config MACH_REAL6410
bool "REAL6410"
depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
help
Machine support for the CoreWind REAL6410
config MACH_SMDK6410
bool "SMDK6410"
depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_KEYPAD
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
Machine support for the Samsung SMDK6410
# At least some of the SMDK6410s were shipped with the card detect
# for the MMC/SD slots connected to the same input. This means that
# either the boards need to be altered to have channel0 to an alternate
# configuration or that only one slot can be used.
choice
prompt "SMDK6410 MMC/SD slot setup"
depends on MACH_SMDK6410
config SMDK6410_SD_CH0
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
endchoice
config SMDK6410_WM1190_EV1
bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
depends on MACH_SMDK6410
depends on I2C=y
select MFD_WM8350_I2C
select REGULATOR
select REGULATOR_WM8350
help
The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
and audio daughtercard for the Samsung SMDK6410 reference
platform. Enabling this option will build support for this
module into the kernel. The presence of the module will be
detected at runtime so the resulting kernel can be used
with or without the 1190-EV1 fitted.
config SMDK6410_WM1192_EV1
bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
depends on MACH_SMDK6410
depends on I2C=y
select MFD_WM831X
select MFD_WM831X_I2C
select REGULATOR
select REGULATOR_WM831X
help
The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
daughtercard for the Samsung SMDK6410 reference platform.
Enabling this option will build support for this module into
the kernel. The presence of the daughtercard will be
detected at runtime so the resulting kernel can be used
with or without the 1192-EV1 fitted.
config MACH_NCP
bool "NCP"
depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_I2C1
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
help
Machine support for the Samsung NCP
config MACH_HMT
bool "Airgoo HMT"
depends on ATAGS && UNUSED_BOARD_FILES
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C_DEV_FB
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select SAMSUNG_DEV_PWM
help
Machine support for the Airgoo HMT
config MACH_SMARTQ
bool
select CPU_S3C6410
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_USB_PHY
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HWMON
select S3C_DEV_RTC
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
help
Shared machine support for SmartQ 5/7
config MACH_SMARTQ5
bool "SmartQ 5"
depends on ATAGS && UNUSED_BOARD_FILES
select MACH_SMARTQ
help
Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
depends on ATAGS && UNUSED_BOARD_FILES
select MACH_SMARTQ
help
Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
depends on ATAGS
......
arch/arm/mach-s3c/Makefile.s3c64xx
View file @ 743c8fbb
......@@ -39,20 +39,7 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi-s3c64xx.o
obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight-s3c64xx.o
# Machine support
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
endif
......
arch/arm/mach-s3c/dev-backlight-s3c64xx.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (c) 2011 Samsung Electronics Co., Ltd.
// http://www.samsung.com
//
// Common infrastructure for PWM Backlight for Samsung boards
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/pwm_backlight.h>
#include "devs.h"
#include "gpio-cfg.h"
#include "backlight-s3c64xx.h"
struct samsung_bl_drvdata {
struct platform_pwm_backlight_data plat_data;
struct samsung_bl_gpio_info *gpio_info;
};
static int samsung_bl_init(struct device *dev)
{
int ret = 0;
struct platform_pwm_backlight_data *pdata = dev->platform_data;
struct samsung_bl_drvdata *drvdata = container_of(pdata,
struct samsung_bl_drvdata, plat_data);
struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
ret = gpio_request(bl_gpio_info->no, "Backlight");
if (ret) {
printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
return ret;
}
/* Configure GPIO pin with specific GPIO function for PWM timer */
s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
return 0;
}
static void samsung_bl_exit(struct device *dev)
{
struct platform_pwm_backlight_data *pdata = dev->platform_data;
struct samsung_bl_drvdata *drvdata = container_of(pdata,
struct samsung_bl_drvdata, plat_data);
struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
gpio_free(bl_gpio_info->no);
}
/* Initialize few important fields of platform_pwm_backlight_data
* structure with default values. These fields can be overridden by
* board-specific values sent from machine file.
* For ease of operation, these fields are initialized with values
* used by most samsung boards.
* Users has the option of sending info about other parameters
* for their specific boards
*/
static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
.plat_data = {
.max_brightness = 255,
.dft_brightness = 255,
.init = samsung_bl_init,
.exit = samsung_bl_exit,
},
};
static struct platform_device samsung_dfl_bl_device __initdata = {
.name = "pwm-backlight",
};
/* samsung_bl_set - Set board specific data (if any) provided by user for
* PWM Backlight control and register specific PWM and backlight device.
* @gpio_info: structure containing GPIO info for PWM timer
* @bl_data: structure containing Backlight control data
*/
void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
struct platform_pwm_backlight_data *bl_data)
{
int ret = 0;
struct platform_device *samsung_bl_device;
struct samsung_bl_drvdata *samsung_bl_drvdata;
struct platform_pwm_backlight_data *samsung_bl_data;
samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
sizeof(struct platform_device), GFP_KERNEL);
if (!samsung_bl_device)
return;
samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
sizeof(samsung_dfl_bl_data), GFP_KERNEL);
if (!samsung_bl_drvdata)
goto err_data;
samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
samsung_bl_drvdata->gpio_info = gpio_info;
samsung_bl_data = &samsung_bl_drvdata->plat_data;
/* Copy board specific data provided by user */
samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
if (bl_data->max_brightness)
samsung_bl_data->max_brightness = bl_data->max_brightness;
if (bl_data->dft_brightness)
samsung_bl_data->dft_brightness = bl_data->dft_brightness;
if (bl_data->lth_brightness)
samsung_bl_data->lth_brightness = bl_data->lth_brightness;
if (bl_data->init)
samsung_bl_data->init = bl_data->init;
if (bl_data->notify)
samsung_bl_data->notify = bl_data->notify;
if (bl_data->notify_after)
samsung_bl_data->notify_after = bl_data->notify_after;
if (bl_data->exit)
samsung_bl_data->exit = bl_data->exit;
if (bl_data->check_fb)
samsung_bl_data->check_fb = bl_data->check_fb;
/* Register the Backlight dev */
ret = platform_device_register(samsung_bl_device);
if (ret) {
printk(KERN_ERR "failed to register backlight device: %d\n", ret);
goto err_plat_reg2;
}
return;
err_plat_reg2:
kfree(samsung_bl_data);
err_data:
kfree(samsung_bl_device);
}
arch/arm/mach-s3c/mach-anw6410.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright 2008 Openmoko, Inc.
// Copyright 2008 Simtec Electronics
// Ben Dooks <ben@simtec.co.uk>
// http://armlinux.simtec.co.uk/
// Copyright 2009 Kwangwoo Lee
// Kwangwoo Lee <kwangwoo.lee@gmail.com>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/dm9000.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include "fb.h"
#include "devs.h"
#include "cpu.h"
#include "irqs.h"
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include "s3c64xx.h"
#include "regs-modem-s3c64xx.h"
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
/* A hardware buffer to control external devices is mapped at 0x30000000.
* It can not be read. So current status must be kept in anw6410_extdev_status.
*/
#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
#define ANW6410_PA_EXTDEV (0x30000000)
#define ANW6410_EN_DM9000 (1<<11)
#define ANW6410_EN_LCD (1<<14)
static __u32 anw6410_extdev_status;
static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
};
/* framebuffer and LCD setup. */
static void __init anw6410_lcd_mode_set(void)
{
u32 tmp;
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the LCD bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
/* GPF1 = LCD panel power
* GPF4 = LCD backlight control
*/
static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
gpio_direction_output(S3C64XX_GPF(1), 1);
gpio_direction_output(S3C64XX_GPF(4), 1);
} else {
anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
gpio_direction_output(S3C64XX_GPF(1), 0);
gpio_direction_output(S3C64XX_GPF(4), 0);
}
}
static struct plat_lcd_data anw6410_lcd_power_data = {
.set_power = anw6410_lcd_power_set,
};
static struct platform_device anw6410_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &anw6410_lcd_power_data,
};
static struct s3c_fb_pd_win anw6410_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode anw6410_lcd_timing = {
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &anw6410_lcd_timing,
.win[0] = &anw6410_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
/* DM9000AEP 10/100 ethernet controller */
static void __init anw6410_dm9000_enable(void)
{
anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
}
static struct resource anw6410_dm9000_resource[] = {
[0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
[1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
[2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
| IRQF_TRIGGER_HIGH),
};
static struct dm9000_plat_data anw6410_dm9000_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
/* dev_addr can be set to provide hwaddr. */
};
static struct platform_device anw6410_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
.resource = anw6410_dm9000_resource,
.dev = {
.platform_data = &anw6410_dm9000_pdata,
},
};
static struct map_desc anw6410_iodesc[] __initdata = {
{
.virtual = (unsigned long)ANW6410_VA_EXTDEV,
.pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
.length = SZ_64K,
.type = MT_DEVICE,
},
};
static struct platform_device *anw6410_devices[] __initdata = {
&s3c_device_fb,
&anw6410_lcd_powerdev,
&anw6410_device_eth,
};
static void __init anw6410_map_io(void)
{
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
anw6410_lcd_mode_set();
}
static void __init anw6410_machine_init(void)
{
s3c_fb_set_platdata(&anw6410_lcd_pdata);
gpio_request(S3C64XX_GPF(1), "panel power");
gpio_request(S3C64XX_GPF(4), "LCD backlight");
anw6410_dm9000_enable();
platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
}
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-hmt.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// mach-hmt.c - Platform code for Airgoo HMT
//
// Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <video/samsung_fimd.h>
#include "map.h"
#include "irqs.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include "gpio-samsung.h"
#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include "devs.h"
#include "cpu.h"
#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
static struct pwm_lookup hmt_pwm_lookup[] = {
PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
};
static int hmt_bl_init(struct device *dev)
{
int ret;
ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
if (!ret)
ret = gpio_direction_output(S3C64XX_GPB(4), 0);
return ret;
}
static int hmt_bl_notify(struct device *dev, int brightness)
{
/*
* translate from CIELUV/CIELAB L*->brightness, E.G. from
* perceived luminance to light output. Assumes range 0..25600
*/
if (brightness < 0x800) {
/* Y = Yn * L / 903.3 */
brightness = (100*256 * brightness + 231245/2) / 231245;
} else {
/* Y = Yn * ((L + 16) / 116 )^3 */
int t = (brightness*4 + 16*1024 + 58)/116;
brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
}
gpio_set_value(S3C64XX_GPB(4), brightness);
return brightness;
}
static void hmt_bl_exit(struct device *dev)
{
gpio_free(S3C64XX_GPB(4));
}
static struct platform_pwm_backlight_data hmt_backlight_data = {
.max_brightness = 100 * 256,
.dft_brightness = 40 * 256,
.init = hmt_bl_init,
.notify = hmt_bl_notify,
.exit = hmt_bl_exit,
};
static struct platform_device hmt_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent = &samsung_device_pwm.dev,
.platform_data = &hmt_backlight_data,
},
};
static struct s3c_fb_pd_win hmt_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode hmt_lcd_timing = {
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &hmt_lcd_timing,
.win[0] = &hmt_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
static struct mtd_partition hmt_nand_part[] = {
[0] = {
.name = "uboot",
.size = SZ_512K,
.offset = 0,
},
[1] = {
.name = "uboot-env1",
.size = SZ_256K,
.offset = SZ_512K,
},
[2] = {
.name = "uboot-env2",
.size = SZ_256K,
.offset = SZ_512K + SZ_256K,
},
[3] = {
.name = "kernel",
.size = SZ_2M,
.offset = SZ_1M,
},
[4] = {
.name = "rootfs",
.size = MTDPART_SIZ_FULL,
.offset = SZ_1M + SZ_2M,
},
};
static struct s3c2410_nand_set hmt_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(hmt_nand_part),
.partitions = hmt_nand_part,
},
};
static struct s3c2410_platform_nand hmt_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(hmt_nand_sets),
.sets = hmt_nand_sets,
.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct gpio_led hmt_leds[] = {
{ /* left function keys */
.name = "left:blue",
.gpio = S3C64XX_GPO(12),
.default_trigger = "default-on",
},
{ /* right function keys - red */
.name = "right:red",
.gpio = S3C64XX_GPO(13),
},
{ /* right function keys - green */
.name = "right:green",
.gpio = S3C64XX_GPO(14),
},
{ /* right function keys - blue */
.name = "right:blue",
.gpio = S3C64XX_GPO(15),
.default_trigger = "default-on",
},
};
static struct gpio_led_platform_data hmt_led_data = {
.num_leds = ARRAY_SIZE(hmt_leds),
.leds = hmt_leds,
};
static struct platform_device hmt_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &hmt_led_data,
};
static struct map_desc hmt_iodesc[] = {};
static struct platform_device *hmt_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_nand,
&s3c_device_fb,
&s3c_device_ohci,
&samsung_device_pwm,
&hmt_backlight_device,
&hmt_leds_device,
};
static void __init hmt_map_io(void)
{
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static void __init hmt_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_fb_set_platdata(&hmt_lcd_pdata);
s3c_nand_set_platdata(&hmt_nand_info);
gpio_request(S3C64XX_GPC(7), "usb power");
gpio_direction_output(S3C64XX_GPC(7), 0);
gpio_request(S3C64XX_GPM(0), "usb power");
gpio_direction_output(S3C64XX_GPM(0), 1);
gpio_request(S3C64XX_GPK(7), "usb power");
gpio_direction_output(S3C64XX_GPK(7), 1);
gpio_request(S3C64XX_GPF(13), "usb power");
gpio_direction_output(S3C64XX_GPF(13), 1);
pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
}
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-mini6410.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
// Copyright 2008 Openmoko, Inc.
// Copyright 2008 Simtec Electronics
// Ben Dooks <ben@simtec.co.uk>
// http://armlinux.simtec.co.uk/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/dm9000.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/types.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "map.h"
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include <linux/soc/samsung/s3c-adc.h>
#include "cpu.h"
#include "devs.h"
#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
#include "sdhci.h"
#include <linux/platform_data/touchscreen-s3c2410.h>
#include "irqs.h"
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include "s3c64xx.h"
#include "regs-modem-s3c64xx.h"
#include "regs-srom-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource mini6410_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
static struct dm9000_plat_data mini6410_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
static struct platform_device mini6410_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(mini6410_dm9k_resource),
.resource = mini6410_dm9k_resource,
.dev = {
.platform_data = &mini6410_dm9k_pdata,
},
};
static struct mtd_partition mini6410_nand_part[] = {
[0] = {
.name = "uboot",
.size = SZ_1M,
.offset = 0,
},
[1] = {
.name = "kernel",
.size = SZ_2M,
.offset = SZ_1M,
},
[2] = {
.name = "rootfs",
.size = MTDPART_SIZ_FULL,
.offset = SZ_1M + SZ_2M,
},
};
static struct s3c2410_nand_set mini6410_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini6410_nand_part),
.partitions = mini6410_nand_part,
},
};
static struct s3c2410_platform_nand mini6410_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(mini6410_nand_sets),
.sets = mini6410_nand_sets,
.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 480,
.yres = 272,
};
static struct fb_videomode mini6410_lcd_type0_timing = {
/* 4.3" 480x272 */
.left_margin = 3,
.right_margin = 2,
.upper_margin = 1,
.lower_margin = 1,
.hsync_len = 40,
.vsync_len = 1,
.xres = 480,
.yres = 272,
};
static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode mini6410_lcd_type1_timing = {
/* 7.0" 800x480 */
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
};
static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = {
{
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &mini6410_lcd_type0_timing,
.win[0] = &mini6410_lcd_type0_fb_win,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
}, {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &mini6410_lcd_type1_timing,
.win[0] = &mini6410_lcd_type1_fb_win,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
},
{ },
};
static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power)
gpio_direction_output(S3C64XX_GPE(0), 1);
else
gpio_direction_output(S3C64XX_GPE(0), 0);
}
static struct plat_lcd_data mini6410_lcd_power_data = {
.set_power = mini6410_lcd_power_set,
};
static struct platform_device mini6410_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &mini6410_lcd_power_data,
};
static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = S3C64XX_GPN(10),
.ext_cd_gpio_invert = true,
};
static struct platform_device *mini6410_devices[] __initdata = {
&mini6410_device_eth,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_ohci,
&s3c_device_nand,
&s3c_device_fb,
&mini6410_lcd_powerdev,
&s3c_device_adc,
};
static void __init mini6410_map_io(void)
{
u32 tmp;
s3c64xx_init_io(NULL, 0);
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the LCD bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
/*
* mini6410_features string
*
* 0-9 LCD configuration
*
*/
static char mini6410_features_str[12] __initdata = "0";
static int __init mini6410_features_setup(char *str)
{
if (str)
strscpy(mini6410_features_str, str,
sizeof(mini6410_features_str));
return 1;
}
__setup("mini6410=", mini6410_features_setup);
#define FEATURE_SCREEN (1 << 0)
struct mini6410_features_t {
int done;
int lcd_index;
};
static void mini6410_parse_features(
struct mini6410_features_t *features,
const char *features_str)
{
const char *fp = features_str;
features->done = 0;
features->lcd_index = 0;
while (*fp) {
char f = *fp++;
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
printk(KERN_INFO "MINI6410: '%c' ignored, "
"screen type already set\n", f);
} else {
int li = f - '0';
if (li >= ARRAY_SIZE(mini6410_lcd_pdata))
printk(KERN_INFO "MINI6410: '%c' out "
"of range LCD mode\n", f);
else {
features->lcd_index = li;
}
}
features->done |= FEATURE_SCREEN;
break;
}
}
}
static void __init mini6410_machine_init(void)
{
u32 cs1;
struct mini6410_features_t features = { 0 };
printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
mini6410_features_str);
/* Parse the feature string */
mini6410_parse_features(&features, mini6410_features_str);
printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
mini6410_lcd_pdata[features.lcd_index].win[0]->xres,
mini6410_lcd_pdata[features.lcd_index].win[0]->yres);
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPF(15), "LCD power");
gpio_request(S3C64XX_GPE(0), "LCD power");
platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
}
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-ncp.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2008-2009 Samsung Electronics
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "irqs.h"
#include "map.h"
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include "fb.h"
#include "devs.h"
#include "cpu.h"
#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
/* REVISIT: NCP uses only serial 1, 2 */
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
static struct platform_device *ncp_devices[] __initdata = {
&s3c_device_hsmmc1,
&s3c_device_i2c0,
};
static struct map_desc ncp_iodesc[] __initdata = {};
static void __init ncp_map_io(void)
{
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static void __init ncp_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
}
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-real6410.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
// Copyright 2008 Openmoko, Inc.
// Copyright 2008 Simtec Electronics
// Ben Dooks <ben@simtec.co.uk>
// http://armlinux.simtec.co.uk/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/dm9000.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/types.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "map.h"
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include "irqs.h"
#include <linux/soc/samsung/s3c-adc.h>
#include "cpu.h"
#include "devs.h"
#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include "s3c64xx.h"
#include "regs-modem-s3c64xx.h"
#include "regs-srom-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource real6410_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
static struct dm9000_plat_data real6410_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
static struct platform_device real6410_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(real6410_dm9k_resource),
.resource = real6410_dm9k_resource,
.dev = {
.platform_data = &real6410_dm9k_pdata,
},
};
static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 480,
.yres = 272,
};
static struct fb_videomode real6410_lcd_type0_timing = {
/* 4.3" 480x272 */
.left_margin = 3,
.right_margin = 2,
.upper_margin = 1,
.lower_margin = 1,
.hsync_len = 40,
.vsync_len = 1,
};
static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode real6410_lcd_type1_timing = {
/* 7.0" 800x480 */
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
};
static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
{
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &real6410_lcd_type0_timing,
.win[0] = &real6410_lcd_type0_fb_win,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
}, {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &real6410_lcd_type1_timing,
.win[0] = &real6410_lcd_type1_fb_win,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
},
{ },
};
static struct mtd_partition real6410_nand_part[] = {
[0] = {
.name = "uboot",
.size = SZ_1M,
.offset = 0,
},
[1] = {
.name = "kernel",
.size = SZ_2M,
.offset = SZ_1M,
},
[2] = {
.name = "rootfs",
.size = MTDPART_SIZ_FULL,
.offset = SZ_1M + SZ_2M,
},
};
static struct s3c2410_nand_set real6410_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(real6410_nand_part),
.partitions = real6410_nand_part,
},
};
static struct s3c2410_platform_nand real6410_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(real6410_nand_sets),
.sets = real6410_nand_sets,
.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *real6410_devices[] __initdata = {
&real6410_device_eth,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_fb,
&s3c_device_nand,
&s3c_device_adc,
&s3c_device_ohci,
};
static void __init real6410_map_io(void)
{
u32 tmp;
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the LCD bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
/*
* real6410_features string
*
* 0-9 LCD configuration
*
*/
static char real6410_features_str[12] __initdata = "0";
static int __init real6410_features_setup(char *str)
{
if (str)
strlcpy(real6410_features_str, str,
sizeof(real6410_features_str));
return 1;
}
__setup("real6410=", real6410_features_setup);
#define FEATURE_SCREEN (1 << 0)
struct real6410_features_t {
int done;
int lcd_index;
};
static void real6410_parse_features(
struct real6410_features_t *features,
const char *features_str)
{
const char *fp = features_str;
features->done = 0;
features->lcd_index = 0;
while (*fp) {
char f = *fp++;
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
printk(KERN_INFO "REAL6410: '%c' ignored, "
"screen type already set\n", f);
} else {
int li = f - '0';
if (li >= ARRAY_SIZE(real6410_lcd_pdata))
printk(KERN_INFO "REAL6410: '%c' out "
"of range LCD mode\n", f);
else {
features->lcd_index = li;
}
}
features->done |= FEATURE_SCREEN;
break;
}
}
}
static void __init real6410_machine_init(void)
{
u32 cs1;
struct real6410_features_t features = { 0 };
printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
real6410_features_str);
/* Parse the feature string */
real6410_parse_features(&features, real6410_features_str);
printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
real6410_lcd_pdata[features.lcd_index].win[0]->xres,
real6410_lcd_pdata[features.lcd_index].win[0]->yres);
s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
s3c_nand_set_platdata(&real6410_nand_info);
s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPF(15), "LCD power");
platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
}
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-smartq.c deleted 100644 → 0
View file @ 1ea35b35
This diff is collapsed.
arch/arm/mach-s3c/mach-smartq.h deleted 100644 → 0
View file @ 1ea35b35
/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/arch/arm/mach-s3c64xx/mach-smartq.h
*
* Copyright (C) 2010 Maurus Cuelenaere
*/
#ifndef __MACH_SMARTQ_H
#define __MACH_SMARTQ_H __FILE__
#include <linux/init.h>
extern void __init smartq_map_io(void);
extern void __init smartq_machine_init(void);
#endif /* __MACH_SMARTQ_H */
arch/arm/mach-s3c/mach-smartq5.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2010 Maurus Cuelenaere
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
#include "irqs.h"
#include "map.h"
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include "cpu.h"
#include "devs.h"
#include "fb.h"
#include "gpio-cfg.h"
#include "s3c64xx.h"
#include "mach-smartq.h"
static struct gpio_led smartq5_leds[] = {
{
.name = "smartq5:green",
.active_low = 1,
.gpio = S3C64XX_GPN(8),
},
{
.name = "smartq5:red",
.active_low = 1,
.gpio = S3C64XX_GPN(9),
},
};
static struct gpio_led_platform_data smartq5_led_data = {
.num_leds = ARRAY_SIZE(smartq5_leds),
.leds = smartq5_leds,
};
static struct platform_device smartq5_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &smartq5_led_data,
};
/* Labels according to the SmartQ manual */
static struct gpio_keys_button smartq5_buttons[] = {
{
.gpio = S3C64XX_GPL(14),
.code = KEY_POWER,
.desc = "Power",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(2),
.code = KEY_KPMINUS,
.desc = "Minus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(12),
.code = KEY_KPPLUS,
.desc = "Plus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(15),
.code = KEY_ENTER,
.desc = "Move",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data smartq5_buttons_data = {
.buttons = smartq5_buttons,
.nbuttons = ARRAY_SIZE(smartq5_buttons),
};
static struct platform_device smartq5_buttons_device = {
.name = "gpio-keys",
.id = 0,
.num_resources = 0,
.dev = {
.platform_data = &smartq5_buttons_data,
}
};
static struct s3c_fb_pd_win smartq5_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode smartq5_lcd_timing = {
.left_margin = 216,
.right_margin = 40,
.upper_margin = 35,
.lower_margin = 10,
.hsync_len = 1,
.vsync_len = 1,
.xres = 800,
.yres = 480,
.refresh = 80,
};
static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &smartq5_lcd_timing,
.win[0] = &smartq5_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VDEN,
};
static struct platform_device *smartq5_devices[] __initdata = {
&smartq5_leds_device,
&smartq5_buttons_device,
};
static void __init smartq5_machine_init(void)
{
s3c_fb_set_platdata(&smartq5_lcd_pdata);
smartq_machine_init();
platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
}
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-smartq7.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2010 Maurus Cuelenaere
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/samsung_fimd.h>
#include "irqs.h"
#include "map.h"
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include "cpu.h"
#include "devs.h"
#include "fb.h"
#include "gpio-cfg.h"
#include "s3c64xx.h"
#include "mach-smartq.h"
static struct gpio_led smartq7_leds[] = {
{
.name = "smartq7:red",
.active_low = 1,
.gpio = S3C64XX_GPN(8),
},
{
.name = "smartq7:green",
.active_low = 1,
.gpio = S3C64XX_GPN(9),
},
};
static struct gpio_led_platform_data smartq7_led_data = {
.num_leds = ARRAY_SIZE(smartq7_leds),
.leds = smartq7_leds,
};
static struct platform_device smartq7_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &smartq7_led_data,
};
/* Labels according to the SmartQ manual */
static struct gpio_keys_button smartq7_buttons[] = {
{
.gpio = S3C64XX_GPL(14),
.code = KEY_POWER,
.desc = "Power",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(2),
.code = KEY_FN,
.desc = "Function",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(3),
.code = KEY_KPMINUS,
.desc = "Minus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(4),
.code = KEY_KPPLUS,
.desc = "Plus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(12),
.code = KEY_ENTER,
.desc = "Enter",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(15),
.code = KEY_ESC,
.desc = "Cancel",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data smartq7_buttons_data = {
.buttons = smartq7_buttons,
.nbuttons = ARRAY_SIZE(smartq7_buttons),
};
static struct platform_device smartq7_buttons_device = {
.name = "gpio-keys",
.id = 0,
.num_resources = 0,
.dev = {
.platform_data = &smartq7_buttons_data,
}
};
static struct s3c_fb_pd_win smartq7_fb_win0 = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode smartq7_lcd_timing = {
.left_margin = 3,
.right_margin = 5,
.upper_margin = 1,
.lower_margin = 20,
.hsync_len = 10,
.vsync_len = 3,
.xres = 800,
.yres = 480,
.refresh = 80,
};
static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &smartq7_lcd_timing,
.win[0] = &smartq7_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK,
};
static struct platform_device *smartq7_devices[] __initdata = {
&smartq7_leds_device,
&smartq7_buttons_device,
};
static void __init smartq7_machine_init(void)
{
s3c_fb_set_platdata(&smartq7_lcd_pdata);
smartq_machine_init();
platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
}
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-smdk6400.c deleted 100644 → 0
View file @ 1ea35b35
// SPDX-License-Identifier: GPL-2.0
//
// Copyright 2008 Simtec Electronics
// Ben Dooks <ben@simtec.co.uk>
// http://armlinux.simtec.co.uk/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "irqs.h"
#include "map.h"
#include "devs.h"
#include "cpu.h"
#include <linux/platform_data/i2c-s3c2410.h>
#include "gpio-samsung.h"
#include "s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
};
static struct map_desc smdk6400_iodesc[] = {};
static void __init smdk6400_map_io(void)
{
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
}
static struct platform_device *smdk6400_devices[] __initdata = {
&s3c_device_hsmmc1,
&s3c_device_i2c0,
};
static struct i2c_board_info i2c_devs[] __initdata = {
{ I2C_BOARD_INFO("wm8753", 0x1A), },
{ I2C_BOARD_INFO("24c08", 0x50), },
};
static void __init smdk6400_machine_init(void)
{
i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
}
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END
arch/arm/mach-s3c/mach-smdk6410.c deleted 100644 → 0
View file @ 1ea35b35
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7