Skip to content

L
linux
Commit 744dbb74 authored by Sam Ravnborg's avatar Sam Ravnborg
Browse files
Options

Merge mars.ravnborg.org:/home/sam/bk/kbuild-mm 

into mars.ravnborg.org:/home/sam/bk/kbuild
parents 4d802161 29d28b2a
Show whitespace changes
Inline Side-by-side
Showing with 406 additions and 217 deletions
Documentation/DocBook/Makefile
View file @ 744dbb74
......@@ -185,9 +185,7 @@ clean-files := $(DOCBOOKS) \
$(patsubst %.sgml, %.9, $(DOCBOOKS)) \
$(C-procfs-example)
ifneq ($(wildcard $(patsubst %.html,%,$(HTML))),)
clean-rule := rm -rf $(wildcard $(patsubst %.html,%,$(HTML)))
endif
clean-dirs := $(patsubst %.sgml,%,$(DOCBOOKS))
#man put files in man subdir - traverse down
subdir- := man/
Documentation/kbuild/makefiles.txt
View file @ 744dbb74
......@@ -25,6 +25,7 @@ This document describes the Linux kernel Makefiles.
--- 4.4 Using C++ for host programs
--- 4.5 Controlling compiler options for host programs
--- 4.6 When host programs are actually built
--- 4.7 Using hostprogs-$(CONFIG_FOO)
=== 5 Kbuild clean infrastructure
......@@ -387,7 +388,7 @@ compilation stage.
Two steps are required in order to use a host executable.
The first step is to tell kbuild that a host program exists. This is
done utilising the variable host-prog.
done utilising the variable hostprogs-y.
The second step is to add an explicit dependency to the executable.
This can be done in two ways. Either add the dependency in a rule,
......@@ -402,7 +403,7 @@ Both possibilities are described in the following.
built on the build host.
Example:
host-progs := bin2hex
hostprogs-y := bin2hex
Kbuild assumes in the above example that bin2hex is made from a single
c-source file named bin2hex.c located in the same directory as
......@@ -418,7 +419,7 @@ Both possibilities are described in the following.
Example:
#scripts/lxdialog/Makefile
host-progs := lxdialog
hostprogs-y := lxdialog
lxdialog-objs := checklist.o lxdialog.o
Objects with extension .o are compiled from the corresponding .c
......@@ -438,7 +439,7 @@ Both possibilities are described in the following.
Example:
#scripts/kconfig/Makefile
host-progs := conf
hostprogs-y := conf
conf-objs := conf.o libkconfig.so
libkconfig-objs := expr.o type.o
......@@ -457,7 +458,7 @@ Both possibilities are described in the following.
Example:
#scripts/kconfig/Makefile
host-progs := qconf
hostprogs-y := qconf
qconf-cxxobjs := qconf.o
In the example above the executable is composed of the C++ file
......@@ -468,7 +469,7 @@ Both possibilities are described in the following.
Example:
#scripts/kconfig/Makefile
host-progs := qconf
hostprogs-y := qconf
qconf-cxxobjs := qconf.o
qconf-objs := check.o
......@@ -509,7 +510,7 @@ Both possibilities are described in the following.
Example:
#drivers/pci/Makefile
host-progs := gen-devlist
hostprogs-y := gen-devlist
$(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
( cd $(obj); ./gen-devlist ) < $<
......@@ -524,18 +525,32 @@ Both possibilities are described in the following.
Example:
#scripts/lxdialog/Makefile
host-progs := lxdialog
always := $(host-progs)
hostprogs-y := lxdialog
always := $(hostprogs-y)
This will tell kbuild to build lxdialog even if not referenced in
any rule.
--- 4.7 Using hostprogs-$(CONFIG_FOO)
A typcal pattern in a Kbuild file lok like this:
Example:
#scripts/Makefile
hostprogs-$(CONFIG_KALLSYMS) += kallsyms
Kbuild knows about both 'y' for built-in and 'm' for module.
So if a config symbol evaluate to 'm', kbuild will still build
the binary. In other words Kbuild handle hostprogs-m exactly
like hostprogs-y. But only hostprogs-y is recommend used
when no CONFIG symbol are involved.
=== 5 Kbuild clean infrastructure
"make clean" deletes most generated files in the src tree where the kernel
is compiled. This includes generated files such as host programs.
Kbuild knows targets listed in $(host-progs), $(always), $(extra-y) and
$(targets). They are all deleted during "make clean".
Kbuild knows targets listed in $(hostprogs-y), $(hostprogs-m), $(always),
$(extra-y) and $(targets). They are all deleted during "make clean".
Files matching the patterns "*.[oas]", "*.ko", plus some additional files
generated by kbuild are deleted all over the kernel src tree when
"make clean" is executed.
......@@ -547,8 +562,17 @@ Additional files can be specified in kbuild makefiles by use of $(clean-files).
clean-files := devlist.h classlist.h
When executing "make clean", the two files "devlist.h classlist.h" will
be deleted. Kbuild knows that files specified by $(clean-files) are
located in the same directory as the makefile.
be deleted. Kbuild will assume files to be in same relative directory as the
Makefile except if an absolute path is specified (path starting with '/').
To delete a directory hirachy use:
Example:
#scripts/package/Makefile
clean-dirs := $(objtree)/debian/
This will delete the directory debian, including all subdirectories.
Kbuild will assume the directories to be in the same relative path as the
Makefile if no absolute path is specified (path does not start with '/').
Usually kbuild descends down in subdirectories due to "obj-* := dir/",
but in the architecture makefiles where the kbuild infrastructure
......
Makefile
View file @ 744dbb74
......@@ -294,9 +294,13 @@ AFLAGS_KERNEL =
NOSTDINC_FLAGS = -nostdinc -iwithprefix include
CPPFLAGS := -D__KERNEL__ -Iinclude \
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
LINUXINCLUDE := -Iinclude \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common
AFLAGS := -D__ASSEMBLY__
......@@ -306,7 +310,7 @@ export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
HOSTCXX HOSTCXXFLAGS LDFLAGS_BLOB LDFLAGS_MODULE CHECK
export CPPFLAGS NOSTDINC_FLAGS OBJCOPYFLAGS LDFLAGS
export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
......@@ -538,7 +542,8 @@ define rule_vmlinux__
echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
endef
do_system_map = $(NM) $(1) | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > $(2)
quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
LDFLAGS_vmlinux += -T arch/$(ARCH)/kernel/vmlinux.lds.s
......@@ -570,8 +575,10 @@ endif
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
define rule_verify_kallsyms
@$(call do_system_map, .tmp_vmlinux$(last_kallsyms), .tmp_System.map)
@cmp -s System.map .tmp_System.map || \
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
$(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
$(Q)cmp -s System.map .tmp_System.map || \
(echo Inconsistent kallsyms data, try setting CONFIG_KALLSYMS_EXTRA_PASS ; rm .tmp_kallsyms* ; false)
endef
......@@ -581,7 +588,7 @@ cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) $(foreach x,$(CONFIG_KALLSYMS_ALL),--al
.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S)
.tmp_kallsyms%.S: .tmp_vmlinux%
.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
$(call cmd,kallsyms)
.tmp_vmlinux1: $(vmlinux-objs) arch/$(ARCH)/kernel/vmlinux.lds.s FORCE
......@@ -596,10 +603,18 @@ cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) $(foreach x,$(CONFIG_KALLSYMS_ALL),--al
endif
# Finally the vmlinux rule
# This rule is also used to generate System.map
# and to verify that the content of kallsyms are consistent
define rule_vmlinux
$(rule_vmlinux__); \
$(call do_system_map, $@, System.map)
$(rule_vmlinux__);
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) System.map' &&) \
$(cmd_sysmap) $@ System.map; \
if [ $$? -ne 0 ]; then \
rm -f $@; \
/bin/false; \
fi;
$(rule_verify_kallsyms)
endef
......
arch/alpha/boot/Makefile
View file @ 744dbb74
......@@ -8,7 +8,7 @@
# Copyright (C) 1994 by Linus Torvalds
#
host-progs := tools/mkbb tools/objstrip
hostprogs-y := tools/mkbb tools/objstrip
targets := vmlinux.gz vmlinux \
vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
tools/bootpzh bootloader bootpheader bootpzheader
......
arch/i386/boot/Makefile
View file @ 744dbb74
......@@ -29,9 +29,9 @@ targets := vmlinux.bin bootsect bootsect.o setup setup.o \
zImage bzImage
subdir- := compressed
host-progs := tools/build
hostprogs-y := tools/build
HOSTCFLAGS_build.o := -Iinclude
HOSTCFLAGS_build.o := $(LINUXINCLUDE)
# ---------------------------------------------------------------------------
......
arch/ppc/boot/Makefile
View file @ 744dbb74
......@@ -23,12 +23,12 @@ subdir-$(CONFIG_PPC_OF) += of1275
# for cleaning
subdir- += simple openfirmware
host-progs := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
.PHONY: $(BOOT_TARGETS) $(bootdir-y)
$(BOOT_TARGETS): $(bootdir-y)
$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
$(addprefix $(obj)/,$(host-progs))
$(addprefix $(obj)/,$(hostprogs-y))
$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
arch/ppc64/boot/Makefile
View file @ 744dbb74
......@@ -25,7 +25,7 @@ CROSS32_COMPILE ?=
BOOTCC := $(CROSS32_COMPILE)gcc
HOSTCC := gcc
BOOTCFLAGS := $(HOSTCFLAGS) -Iinclude -fno-builtin
BOOTCFLAGS := $(HOSTCFLAGS) $(LINUXINCLUDE) -fno-builtin
BOOTAS := $(CROSS32_COMPILE)as
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional
BOOTLD := $(CROSS32_COMPILE)ld
......@@ -58,7 +58,7 @@ obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section)))
src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section)))
gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section)))
host-progs := piggy addnote addSystemMap addRamDisk
hostprogs-y := piggy addnote addSystemMap addRamDisk
targets += zImage zImage.initrd imagesize.c \
$(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \
$(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \
......
arch/sparc/boot/Makefile
View file @ 744dbb74
......@@ -7,8 +7,8 @@
ROOT_IMG := /usr/src/root.img
ELFTOAOUT := elftoaout
host-progs := piggyback btfixupprep
targets := tftpboot.img btfix.o btfix.s image
hostprogs-y := piggyback btfixupprep
targets := tftpboot.img btfix.o btfix.S image
quiet_cmd_elftoaout = ELFTOAOUT $@
cmd_elftoaout = $(ELFTOAOUT) $(obj)/image -o $@
......@@ -16,19 +16,43 @@ quiet_cmd_piggy = PIGGY $@
cmd_piggy = $(obj)/piggyback $@ $(obj)/System.map $(ROOT_IMG)
quiet_cmd_btfix = BTFIX $@
cmd_btfix = $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
quiet_cmd_sysmap = SYSMAP $(obj)/System.map
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
quiet_cmd_image = LD $@
cmd_image = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) -o $@
define rule_image
$(if $($(quiet)cmd_image), \
echo ' $($(quiet)cmd_image)' &&) \
$(cmd_image); \
$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap)' &&) \
$(cmd_sysmap) $@ $(obj)/System.map; \
if [ $$? -ne 0 ]; then \
rm -f $@; \
/bin/false; \
fi; \
echo 'cmd_$@ := $(cmd_image)' > $(@D)/.$(@F).cmd
endef
BTOBJS := $(HEAD_Y) $(INIT_Y)
BTLIBS := $(CORE_Y) $(LIBS_Y) $(DRIVERS_Y) $(NET_Y)
LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds.s $(BTOBJS) --start-group $(BTLIBS) --end-group $(kallsyms.o)
LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds.s $(BTOBJS) \
--start-group $(BTLIBS) --end-group \
$(kallsyms.o) $(obj)/btfix.o
# Actual linking
# Link the final image including btfixup'ed symbols.
# This is a replacement for the link done in the top-level Makefile.
# Note: No dependency on the prerequisite files since that would require
# make to try check if they are updated - and due to changes
# in gcc options (path for example) this would result in
# these files being recompiled for each build.
$(obj)/image: $(obj)/btfix.o FORCE
$(call if_changed,ld)
$(NM) $@ | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > $(obj)/System.map
$(call if_changed_rule,image)
$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
$(call if_changed,elftoaout)
$(call if_changed,piggy)
$(obj)/btfix.s: $(obj)/btfixupprep vmlinux FORCE
$(obj)/btfix.S: $(obj)/btfixupprep vmlinux FORCE
$(call if_changed,btfix)
arch/sparc64/boot/Makefile
View file @ 744dbb74
......@@ -7,7 +7,7 @@
ROOT_IMG := /usr/src/root.img
ELFTOAOUT := elftoaout
host-progs := piggyback
hostprogs-y := piggyback
targets := image tftpboot.img vmlinux.aout
quiet_cmd_elftoaout = ELF2AOUT $@
......
arch/um/sys-i386/util/Makefile
View file @ 744dbb74
host-progs := mk_sc
always := $(host-progs) mk_thread
hostprogs-y := mk_sc
always := $(hostprogs-y) mk_thread
targets := mk_thread_kern.o mk_thread_user.o
mk_sc-objs := mk_sc.o
......
arch/x86_64/boot/Makefile
View file @ 744dbb74
......@@ -30,7 +30,7 @@ targets := vmlinux.bin bootsect bootsect.o \
EXTRA_CFLAGS := -m32
host-progs := tools/build
hostprogs-y := tools/build
subdir- := compressed/ #Let make clean descend in compressed/
# ---------------------------------------------------------------------------
......
drivers/atm/Makefile
View file @ 744dbb74
......@@ -3,7 +3,7 @@
#
fore_200e-objs := fore200e.o
host-progs := fore200e_mkfirm
hostprogs-y := fore200e_mkfirm
# Files generated that shall be removed upon make clean
clean-files := atmsar11.bin atmsar11.bin1 atmsar11.bin2 pca200e.bin \
......
drivers/md/Makefile
View file @ 744dbb74
......@@ -10,7 +10,7 @@ raid6-objs := raid6main.o raid6algos.o raid6recov.o raid6tables.o \
raid6int1.o raid6int2.o raid6int4.o \
raid6int8.o raid6int16.o raid6int32.o \
raid6mmx.o raid6sse1.o raid6sse2.o
host-progs := mktables
hostprogs-y := mktables
# Note: link order is important. All raid personalities
# and xor.o must come before md.o, as they each initialise
......
drivers/media/dvb/ttpci/Makefile
View file @ 744dbb74
......@@ -13,7 +13,7 @@ obj-$(CONFIG_DVB_AV7110) += dvb-ttpci.o ttpci-eeprom.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
host-progs := fdump
hostprogs-y := fdump
ifdef CONFIG_DVB_AV7110_FIRMWARE
$(obj)/av7110.o: $(obj)/fdump $(obj)/av7110_firm.h
......
drivers/pci/Makefile
View file @ 744dbb74
......@@ -35,7 +35,7 @@ ifndef CONFIG_X86
obj-y += syscall.o
endif
host-progs := gen-devlist
hostprogs-y := gen-devlist
# Dependencies on generated files need to be listed explicitly
$(obj)/names.o: $(obj)/devlist.h $(obj)/classlist.h
......
drivers/zorro/Makefile
View file @ 744dbb74
......@@ -5,7 +5,7 @@
obj-$(CONFIG_ZORRO) += zorro.o zorro-driver.o zorro-sysfs.o names.o
obj-$(CONFIG_PROC_FS) += proc.o
host-progs := gen-devlist
hostprogs-y := gen-devlist
# Files generated that shall be removed upon make clean
clean-files := devlist.h
......
lib/Makefile
View file @ 744dbb74
......@@ -25,7 +25,7 @@ obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
host-progs := gen_crc32table
hostprogs-y := gen_crc32table
clean-files := crc32table.h
$(obj)/crc32.o: $(obj)/crc32table.h
......
scripts/Makefile
View file @ 744dbb74
......@@ -2,14 +2,21 @@
# scripts contains sources for various helper programs used throughout
# the kernel for the build process.
# ---------------------------------------------------------------------------
# docproc: Preprocess .tmpl file in order to generate .sgml docs
# kallsyms: Find all symbols in vmlinux
# pnmttologo: Convert pnm files to logo files
# conmakehash: Create chartable
# conmakehash: Create arrays for initializing the kernel console tables
host-progs := conmakehash kallsyms pnmtologo bin2c
always := $(host-progs)
hostprogs-$(CONFIG_KALLSYMS) += kallsyms
hostprogs-$(CONFIG_LOGO) += pnmtologo
hostprogs-$(CONFIG_VT) += conmakehash
hostprogs-$(CONFIG_PROM_CONSOLE) += conmakehash
hostprogs-$(CONFIG_IKCONFIG) += bin2c
always := $(hostprogs-y)
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_MODULES) += mod
# Let clean descend into subdirs
subdir- += basic lxdialog kconfig package
scripts/Makefile.build
View file @ 744dbb74
......@@ -14,6 +14,16 @@ include $(obj)/Makefile
include scripts/Makefile.lib
ifdef host-progs
$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
hostprogs-y += $(host-progs)
endif
# Do not include host rules unles needed
ifneq ($(hostprogs-y)$(hostprogs-m),)
include scripts/Makefile.host
endif
ifneq ($(KBUILD_SRC),)
# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
......@@ -275,90 +285,6 @@ $(multi-used-m) : %.o: $(multi-objs-m) FORCE
targets += $(multi-used-y) $(multi-used-m)
# Compile programs on the host
# ===========================================================================
# host-progs := bin2hex
# Will compile bin2hex.c and create an executable named bin2hex
#
# host-progs := lxdialog
# lxdialog-objs := checklist.o lxdialog.o
# Will compile lxdialog.c and checklist.c, and then link the executable
# lxdialog, based on checklist.o and lxdialog.o
#
# host-progs := qconf
# qconf-cxxobjs := qconf.o
# qconf-objs := menu.o
# Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf
# host-progs := conf
# conf-objs := conf.o libkconfig.so
# libkconfig-objs := expr.o type.o
# Will create a shared library named libkconfig.so that consist of
# expr.o and type.o (they are both compiled as C code and the object file
# are made as position independent code).
# conf.c is compiled as a c program, and conf.o is linked together with
# libkconfig.so as the executable conf.
# Note: Shared libraries consisting of C++ files are not supported
#
# Create executable from a single .c file
# host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@
cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(HOST_LOADLIBES) -o $@ $<
$(host-csingle): %: %.c FORCE
$(call if_changed_dep,host-csingle)
# Link an executable based on list of .o files, all plain c
# host-cmulti -> executable
quiet_cmd_host-cmulti = HOSTLD $@
cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
$(addprefix $(obj)/,$($(@F)-objs)) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cmulti): %: $(host-cobjs) $(host-cshlib) FORCE
$(call if_changed,host-cmulti)
# Create .o file from a single .c file
# host-cobjs -> .o
quiet_cmd_host-cobjs = HOSTCC $@
cmd_host-cobjs = $(HOSTCC) $(hostc_flags) -c -o $@ $<
$(host-cobjs): %.o: %.c FORCE
$(call if_changed_dep,host-cobjs)
# Link an executable based on list of .o files, a mixture of .c and .cc
# host-cxxmulti -> executable
quiet_cmd_host-cxxmulti = HOSTLD $@
cmd_host-cxxmulti = $(HOSTCXX) $(HOSTLDFLAGS) -o $@ \
$(foreach o,objs cxxobjs,\
$(addprefix $(obj)/,$($(@F)-$(o)))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cxxmulti): %: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
$(call if_changed,host-cxxmulti)
# Create .o file from a single .cc (C++) file
quiet_cmd_host-cxxobjs = HOSTCXX $@
cmd_host-cxxobjs = $(HOSTCXX) $(hostcxx_flags) -c -o $@ $<
$(host-cxxobjs): %.o: %.cc FORCE
$(call if_changed_dep,host-cxxobjs)
# Compile .c file, create position independent .o file
# host-cshobjs -> .o
quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
$(host-cshobjs): %.o: %.c FORCE
$(call if_changed_dep,host-cshobjs)
# Link a shared library, based on position independent .o files
# *.o -> .so shared library (host-cshlib)
quiet_cmd_host-cshlib = HOSTLLD -shared $@
cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
$(addprefix $(obj)/,$($(@F:.so=-objs))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cshlib): %: $(host-cshobjs) FORCE
$(call if_changed,host-cshlib)
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
$(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
# Descending
# ---------------------------------------------------------------------------
......
scripts/Makefile.clean
View file @ 744dbb74
......@@ -29,21 +29,37 @@ subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-))
# Add subdir path
subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn))
__clean-files := $(wildcard $(addprefix $(obj)/, \
$(extra-y) $(EXTRA_TARGETS) $(always) $(host-progs) \
$(targets) $(clean-files)))
__clean-files := $(extra-y) $(EXTRA_TARGETS) $(always) \
$(targets) $(clean-files) \
$(host-progs) \
$(hostprogs-y) $(hostprogs-m) $(hostprogs-)
__clean-files := $(wildcard \
$(addprefix $(obj)/, $(filter-out /%, $(__clean-files))) \
$(filter /%, $(__clean-files)))
__clean-dirs := $(wildcard \
$(addprefix $(obj)/, $(filter-out /%, $(clean-dirs))) \
$(filter /%, $(clean-dirs)))
# ==========================================================================
quiet_cmd_clean = CLEAN $(obj)
cmd_clean = rm -f $(__clean-files); $(clean-rule)
cmd_clean = rm -f $(__clean-files)
quiet_cmd_cleandir = CLEAN $(__clean-dirs)
cmd_cleandir = rm -rf $(__clean-dirs)
__clean: $(subdir-ymn)
ifneq ($(strip $(__clean-files) $(clean-rule)),)
ifneq ($(strip $(__clean-files)),)
+$(call cmd,clean)
else
@:
endif
ifneq ($(strip $(__clean-dirs)),)
+$(call cmd,cleandir)
endif
ifneq ($(strip $(clean-rule)),)
+$(clean-rule)
endif
@:
# ===========================================================================
# Generic stuff
......
scripts/Makefile.host 0 → 100644
View file @ 744dbb74
# ==========================================================================
# Building binaries on the host system
# Binaries are used during the compilation of the kernel, for example
# to preprocess a data file.
#
# Both C and C++ is supported, but preferred language is C for such utilities.
#
# Samle syntax (see Documentation/kbuild/makefile.txt for reference)
# hostprogs-y := bin2hex
# Will compile bin2hex.c and create an executable named bin2hex
#
# hostprogs-y := lxdialog
# lxdialog-objs := checklist.o lxdialog.o
# Will compile lxdialog.c and checklist.c, and then link the executable
# lxdialog, based on checklist.o and lxdialog.o
#
# hostprogs-y := qconf
# qconf-cxxobjs := qconf.o
# qconf-objs := menu.o
# Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf
# hostprogs-y := conf
# conf-objs := conf.o libkconfig.so
# libkconfig-objs := expr.o type.o
# Will create a shared library named libkconfig.so that consist of
# expr.o and type.o (they are both compiled as C code and the object file
# are made as position independent code).
# conf.c is compiled as a c program, and conf.o is linked together with
# libkconfig.so as the executable conf.
# Note: Shared libraries consisting of C++ files are not supported
__hostprogs := $(sort $(hostprogs-y)$(hostprogs-m))
# hostprogs-y := tools/build may have been specified. Retreive directory
obj-dirs += $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
obj-dirs := $(strip $(sort $(filter-out ./,$(obj-dirs))))
# C code
# Executables compiled from a single .c file
host-csingle := $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m)))
# C executables linked based on several .o files
host-cmulti := $(foreach m,$(__hostprogs),\
$(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
# Object (.o) files compiled from .c files
host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
# C++ code
# C++ executables compiled from at least on .cc file
# and zero or more .c files
host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
# C++ Object (.o) files compiled from .cc files
host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
# Shared libaries (only .c supported)
# Shared libraries (.so) - all .so files referenced in "xxx-objs"
host-cshlib := $(sort $(filter %.so, $(host-cobjs)))
# Remove .so files from "xxx-objs"
host-cobjs := $(filter-out %.so,$(host-cobjs))
#Object (.o) files used by the shared libaries
host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
__hostprogs := $(addprefix $(obj)/,$(__hostprogs))
host-csingle := $(addprefix $(obj)/,$(host-csingle))
host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
#####
# Handle options to gcc. Support building with separate output directory
_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS_$(*F).o)
_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) $(HOSTCXXFLAGS_$(*F).o)
ifeq ($(KBUILD_SRC),)
__hostc_flags = $(_hostc_flags)
__hostcxx_flags = $(_hostcxx_flags)
else
__hostc_flags = -I$(obj) $(call flags,_hostc_flags)
__hostcxx_flags = -I$(obj) $(call flags,_hostcxx_flags)
endif
hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags)
hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
#####
# Compile programs on the host
# Create executable from a single .c file
# host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@
cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(HOST_LOADLIBES) -o $@ $<
$(host-csingle): %: %.c FORCE
$(call if_changed_dep,host-csingle)
# Link an executable based on list of .o files, all plain c
# host-cmulti -> executable
quiet_cmd_host-cmulti = HOSTLD $@
cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
$(addprefix $(obj)/,$($(@F)-objs)) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cmulti): %: $(host-cobjs) $(host-cshlib) FORCE
$(call if_changed,host-cmulti)
# Create .o file from a single .c file
# host-cobjs -> .o
quiet_cmd_host-cobjs = HOSTCC $@
cmd_host-cobjs = $(HOSTCC) $(hostc_flags) -c -o $@ $<
$(host-cobjs): %.o: %.c FORCE
$(call if_changed_dep,host-cobjs)
# Link an executable based on list of .o files, a mixture of .c and .cc
# host-cxxmulti -> executable
quiet_cmd_host-cxxmulti = HOSTLD $@
cmd_host-cxxmulti = $(HOSTCXX) $(HOSTLDFLAGS) -o $@ \
$(foreach o,objs cxxobjs,\
$(addprefix $(obj)/,$($(@F)-$(o)))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cxxmulti): %: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
$(call if_changed,host-cxxmulti)
# Create .o file from a single .cc (C++) file
quiet_cmd_host-cxxobjs = HOSTCXX $@
cmd_host-cxxobjs = $(HOSTCXX) $(hostcxx_flags) -c -o $@ $<
$(host-cxxobjs): %.o: %.cc FORCE
$(call if_changed_dep,host-cxxobjs)
# Compile .c file, create position independent .o file
# host-cshobjs -> .o
quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
$(host-cshobjs): %.o: %.c FORCE
$(call if_changed_dep,host-cshobjs)
# Link a shared library, based on position independent .o files
# *.o -> .so shared library (host-cshlib)
quiet_cmd_host-cshlib = HOSTLLD -shared $@
cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
$(addprefix $(obj)/,$($(@F:.so=-objs))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cshlib): %: $(host-cshobjs) FORCE
$(call if_changed,host-cshlib)
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
$(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
scripts/Makefile.lib
View file @ 744dbb74
......@@ -60,41 +60,11 @@ subdir-obj-y := $(foreach o,$(obj-y),$(if $(filter-out $(o),$(notdir $(o))),$(o)
# $(obj-dirs) is a list of directories that contain object files
obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))
obj-dirs += $(foreach f,$(host-progs), $(if $(dir $(f)),$(dir $(f))))
obj-dirs := $(strip $(sort $(filter-out ./,$(obj-dirs))))
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
# C code
# Executables compiled from a single .c file
host-csingle := $(foreach m,$(host-progs),$(if $($(m)-objs),,$(m)))
# C executables linked based on several .o files
host-cmulti := $(foreach m,$(host-progs),\
$(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
# Object (.o) files compiled from .c files
host-cobjs := $(sort $(foreach m,$(host-progs),$($(m)-objs)))
# C++ code
# C++ executables compiled from at least on .cc file
# and zero or more .c files
host-cxxmulti := $(foreach m,$(host-progs),$(if $($(m)-cxxobjs),$(m)))
# C++ Object (.o) files compiled from .cc files
host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
# Shared libaries (only .c supported)
# Shared libraries (.so) - all .so files referenced in "xxx-objs"
host-cshlib := $(sort $(filter %.so, $(host-cobjs)))
# Remove .so files from "xxx-objs"
host-cobjs := $(filter-out %.so,$(host-cobjs))
#Object (.o) files used by the shared libaries
host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
# Add subdir path
extra-y := $(addprefix $(obj)/,$(extra-y))
......@@ -113,14 +83,6 @@ multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
host-progs := $(addprefix $(obj)/,$(host-progs))
host-csingle := $(addprefix $(obj)/,$(host-csingle))
host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
# The temporary file to save gcc -MD generated dependencies must not
# contain a comma
......@@ -136,12 +98,8 @@ depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
basename_flags = -DKBUILD_BASENAME=$(subst $(comma),_,$(subst -,_,$(*F)))
modname_flags = $(if $(filter 1,$(words $(modname))),-DKBUILD_MODNAME=$(subst $(comma),_,$(subst -,_,$(modname))))
_c_flags = $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$(*F).o)
_a_flags = $(AFLAGS) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) $(HOSTCFLAGS_$(*F).o)
_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) $(HOSTCXXFLAGS_$(*F).o)
# If building the kernel in a separate objtree expand all occurrences
# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
......@@ -149,8 +107,6 @@ _hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) $(HOSTCXXFLAGS_$(*F).o)
ifeq ($(KBUILD_SRC),)
__c_flags = $(_c_flags)
__a_flags = $(_a_flags)
__hostc_flags = $(_hostc_flags)
__hostcxx_flags = $(_hostcxx_flags)
else
# Prefix -I with $(srctree) if it is not an absolute path
......@@ -164,8 +120,6 @@ flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
# FIXME: Replace both with specific CFLAGS* statements in the makefiles
__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
__a_flags = $(call flags,_a_flags)
__hostc_flags = -I$(obj) $(call flags,_hostc_flags)
__hostcxx_flags = -I$(obj) $(call flags,_hostcxx_flags)
endif
c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
......@@ -175,9 +129,6 @@ c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(CPPFLAGS) \
$(__a_flags) $(modkern_aflags)
hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags)
hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
ld_flags = $(LDFLAGS) $(EXTRA_LDFLAGS)
# Finds the multi-part object the current object will be linked into
......
scripts/basic/Makefile
View file @ 744dbb74
......@@ -11,8 +11,8 @@
# include/config/...
# docproc: Used in Documentation/docbook
host-progs := fixdep split-include docproc
always := $(host-progs)
hostprogs-y := fixdep split-include docproc
always := $(hostprogs-y)
# fixdep is needed to compile other host programs
$(addprefix $(obj)/,$(filter-out fixdep,$(always))): $(obj)/fixdep
scripts/basic/fixdep.c
View file @ 744dbb74
......@@ -104,7 +104,7 @@
#include <stdio.h>
#include <limits.h>
#include <ctype.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#define INT_CONF ntohl(0x434f4e46)
#define INT_ONFI ntohl(0x4f4e4649)
......
scripts/genksyms/Makefile
View file @ 744dbb74
host-progs := genksyms
always := $(host-progs)
hostprogs-y := genksyms
always := $(hostprogs-y)
genksyms-objs := genksyms.o parse.o lex.o
......
scripts/kconfig/Makefile
View file @ 744dbb74
......@@ -67,7 +67,7 @@ help:
libkconfig-objs := zconf.tab.o
host-progs := conf mconf qconf gconf
hostprogs-y := conf mconf qconf gconf
conf-objs := conf.o libkconfig.so
mconf-objs := mconf.o libkconfig.so
......
scripts/kconfig/confdata.c
View file @ 744dbb74
......@@ -8,6 +8,7 @@
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#define LKC_DIRECT_LINK
......@@ -268,6 +269,7 @@ int conf_write(const char *name)
char dirname[128], tmpname[128], newname[128];
int type, l;
const char *str;
time_t now;
dirname[0] = 0;
if (name && name[0]) {
......@@ -301,14 +303,25 @@ int conf_write(const char *name)
if (!out_h)
return 1;
}
sym = sym_lookup("KERNELRELEASE", 0);
sym_calc_value(sym);
time(&now);
fprintf(out, "#\n"
"# Automatically generated make config: don't edit\n"
"#\n");
"# Linux kernel version: %s\n"
"# %s"
"#\n",
sym_get_string_value(sym),
ctime(&now));
if (out_h)
fprintf(out_h, "/*\n"
" * Automatically generated C config: don't edit\n"
" * Linux kernel version: %s\n"
" * %s"
" */\n"
"#define AUTOCONF_INCLUDED\n");
"#define AUTOCONF_INCLUDED\n",
sym_get_string_value(sym),
ctime(&now));
if (!sym_change_count)
sym_clear_all_valid();
......
scripts/lxdialog/Makefile
View file @ 744dbb74
......@@ -15,8 +15,8 @@ endif
endif
endif
host-progs := lxdialog
always := ncurses $(host-progs)
hostprogs-y := lxdialog
always := ncurses $(hostprogs-y)
lxdialog-objs := checklist.o menubox.o textbox.o yesno.o inputbox.o \
util.o lxdialog.o msgbox.o
......
scripts/mksysmap 0 → 100644
View file @ 744dbb74
#!/bin/sh -x
# Based on the vmlinux file create the System.map file
# System.map is used by module-init tools and some debugging
# tools to retreive the actual addresses of symbols in the kernel.
#
# Before creating the System.map file as a sideeffect check for
# undefined symbols.
# At least one version of the ARM bin-utils did not error out on
# undefined symbols, so catch them here instead.
# Usage
# mksysmap vmlinux System.map
#####
# Check for undefined symbols.
# Undefined symbols with three leading underscores are ignored since
# they are used by the sparc BTFIXUP logic - and is assumed to be undefined.
if [ "`$NM -u $1 | grep -v ' ___'`" != "" ]; then
echo "$1: error: undefined symbol(s) found:"
$NM -u $1 | grep -v ' ___'
exit 1
fi
#####
# Generate System.map (actual filename passed as second argument)
# $NM produces the following output:
# f0081e80 T alloc_vfsmnt
# The second row specify the type of the symbol:
# A = Absolute
# B = Uninitialised data (.bss)
# C = Comon symbol
# D = Initialised data
# G = Initialised data for small objects
# I = Indirect reference to another symbol
# N = Debugging symbol
# R = Read only
# S = Uninitialised data for small objects
# T = Text code symbol
# U = Undefined symbol
# V = Weak symbol
# W = Weak symbol
# Corresponding small letters are local symbols
# For System.map filter away:
# a - local absolute symbols
# U - undefined global symbols
# w - local weak symbols
# readprofile starts reading symbols when _stext is found, and
# continue until it finds a symbol which is not either of 'T', 't',
# 'W' or 'w'. __crc_ are 'A' and placed in the middle
# so we just ignore them to let readprofile continue to work.
# (At least sparc64 has __crc_ in the middle).
$NM -n $1 | grep -v '\( [aUw] \)\|\(__crc_\)' > $2
scripts/mod/Makefile
View file @ 744dbb74
host-progs := modpost mk_elfconfig
always := $(host-progs) empty.o
hostprogs-y := modpost mk_elfconfig
always := $(hostprogs-y) empty.o
modpost-objs := modpost.o file2alias.o sumversion.o
......
scripts/mod/sumversion.c
View file @ 744dbb74
#include <netinet/in.h>
#include <arpa/inet.h>
#include <stdint.h>
#include <ctype.h>
#include <errno.h>
......
scripts/package/Makefile
View file @ 744dbb74
......@@ -51,7 +51,7 @@ rpm-pkg rpm: $(objtree)/kernel.spec
$(RPM) --target $(UTS_MACHINE) -ta ../$(KERNELPATH).tar.gz
rm ../$(KERNELPATH).tar.gz
clean-rule += rm -f $(objtree)/kernel.spec
clean-files := $(objtree)/kernel.spec
# binrpm-pkg
.PHONY: binrpm-pkg
......@@ -67,7 +67,7 @@ binrpm-pkg: $(objtree)/binkernel.spec
$(RPM) --define "_builddir $(srctree)" --target $(UTS_MACHINE) -bb $<
clean-rule += rm -f $(objtree)/binkernel.spec
clean-files += $(objtree)/binkernel.spec
# Deb target
# ---------------------------------------------------------------------------
......@@ -77,7 +77,7 @@ deb-pkg:
$(MAKE)
$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
clean-rule += && rm -rf $(objtree)/debian/
clean-dirs += $(objtree)/debian/
# Help text displayed when executing 'make help'
......
sound/oss/Makefile
View file @ 744dbb74
......@@ -103,7 +103,7 @@ sb_lib-objs := sb_common.o sb_audio.o sb_midi.o sb_mixer.o sb_ess.o
vidc_mod-objs := vidc.o vidc_fill.o
wavefront-objs := wavfront.o wf_midi.o yss225.o
host-progs := bin2hex hex2hex
hostprogs-y := bin2hex hex2hex
# Files generated that shall be removed upon make clean
clean-files := maui_boot.h msndperm.c msndinit.c pndsperm.c pndspini.c \
......
usr/Makefile
View file @ 744dbb74
obj-y := initramfs_data.o
host-progs := gen_init_cpio
hostprogs-y := gen_init_cpio
clean-files := initramfs_data.cpio.gz
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7