video: fbdev: remove unused auo_k190xfb drivers

auo_k1900fb and auo_k1901fb drivers have been introduced six
years ago by following commits:

commit 2c8304d3 ("video: auo_k190x: add code shared by controller drivers")
commit 96b1d500 ("video: auo_k190x: add driver for AUO-K1900 variant")
commit 53027cdf ("video: auo_k190x: add driver for AUO-K1901 variant")

They never had any in-kernel user so just remove them (since
they are platform drivers they need corresponding platform
devices to be registered by kernel and it has never happened).
Reviewed-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
parent 85d108de
......@@ -2253,39 +2253,6 @@ config FB_BROADSHEET
and could also have been called by other names when coupled with
a bridge adapter.
config FB_AUO_K190X
tristate "AUO-K190X EPD controller support"
depends on FB
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
help
Provides support for epaper controllers from the K190X series
of AUO. These controllers can be used to drive epaper displays
from Sipix.
This option enables the common support, shared by the individual
controller drivers. You will also have to enable the driver
for the controller type used in your device.
config FB_AUO_K1900
tristate "AUO-K1900 EPD controller support"
depends on FB && FB_AUO_K190X
help
This driver implements support for the AUO K1900 epd-controller.
This controller can drive Sipix epaper displays but can only do
serial updates, reducing the number of possible frames per second.
config FB_AUO_K1901
tristate "AUO-K1901 EPD controller support"
depends on FB && FB_AUO_K190X
help
This driver implements support for the AUO K1901 epd-controller.
This controller can drive Sipix epaper displays and supports
concurrent updates, making higher frames per second possible.
config FB_JZ4740
tristate "JZ4740 LCD framebuffer support"
depends on FB && MACH_JZ4740
......
......@@ -100,9 +100,6 @@ obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o
obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o
obj-$(CONFIG_FB_AUO_K1900) += auo_k1900fb.o
obj-$(CONFIG_FB_AUO_K1901) += auo_k1901fb.o
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
......
/*
* auok190xfb.c -- FB driver for AUO-K1900 controllers
*
* Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
*
* based on broadsheetfb.c
*
* Copyright (C) 2008, Jaya Kumar
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
*
* This driver is written to be used with the AUO-K1900 display controller.
*
* It is intended to be architecture independent. A board specific driver
* must be used to perform all the physical IO interactions.
*
* The controller supports different update modes:
* mode0+1 16 step gray (4bit)
* mode2 4 step gray (2bit) - FIXME: add strange refresh
* mode3 2 step gray (1bit) - FIXME: add strange refresh
* mode4 handwriting mode (strange behaviour)
* mode5 automatic selection of update mode
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/firmware.h>
#include <linux/gpio.h>
#include <linux/pm_runtime.h>
#include <video/auo_k190xfb.h>
#include "auo_k190x.h"
/*
* AUO-K1900 specific commands
*/
#define AUOK1900_CMD_PARTIALDISP 0x1001
#define AUOK1900_CMD_ROTATION 0x1006
#define AUOK1900_CMD_LUT_STOP 0x1009
#define AUOK1900_INIT_TEMP_AVERAGE (1 << 13)
#define AUOK1900_INIT_ROTATE(_x) ((_x & 0x3) << 10)
#define AUOK1900_INIT_RESOLUTION(_res) ((_res & 0x7) << 2)
static void auok1900_init(struct auok190xfb_par *par)
{
struct device *dev = par->info->device;
struct auok190x_board *board = par->board;
u16 init_param = 0;
pm_runtime_get_sync(dev);
init_param |= AUOK1900_INIT_TEMP_AVERAGE;
init_param |= AUOK1900_INIT_ROTATE(par->rotation);
init_param |= AUOK190X_INIT_INVERSE_WHITE;
init_param |= AUOK190X_INIT_FORMAT0;
init_param |= AUOK1900_INIT_RESOLUTION(par->resolution);
init_param |= AUOK190X_INIT_SHIFT_RIGHT;
auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);
/* let the controller finish */
board->wait_for_rdy(par);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
static void auok1900_update_region(struct auok190xfb_par *par, int mode,
u16 y1, u16 y2)
{
struct device *dev = par->info->device;
unsigned char *buf = (unsigned char *)par->info->screen_base;
int xres = par->info->var.xres;
int line_length = par->info->fix.line_length;
u16 args[4];
pm_runtime_get_sync(dev);
mutex_lock(&(par->io_lock));
/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
y1 &= 0xfffe;
y2 &= 0xfffe;
dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
1, y1+1, xres, y2-y1, mode);
/* to FIX handle different partial update modes */
args[0] = mode | 1;
args[1] = y1 + 1;
args[2] = xres;
args[3] = y2 - y1;
buf += y1 * line_length;
auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args,
((y2 - y1) * line_length)/2, (u16 *) buf);
auok190x_send_command(par, AUOK190X_CMD_DATA_STOP);
par->update_cnt++;
mutex_unlock(&(par->io_lock));
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
static void auok1900fb_dpy_update_pages(struct auok190xfb_par *par,
u16 y1, u16 y2)
{
int mode;
if (par->update_mode < 0) {
mode = AUOK190X_UPDATE_MODE(1);
par->last_mode = -1;
} else {
mode = AUOK190X_UPDATE_MODE(par->update_mode);
par->last_mode = par->update_mode;
}
if (par->flash)
mode |= AUOK190X_UPDATE_NONFLASH;
auok1900_update_region(par, mode, y1, y2);
}
static void auok1900fb_dpy_update(struct auok190xfb_par *par)
{
int mode;
if (par->update_mode < 0) {
mode = AUOK190X_UPDATE_MODE(0);
par->last_mode = -1;
} else {
mode = AUOK190X_UPDATE_MODE(par->update_mode);
par->last_mode = par->update_mode;
}
if (par->flash)
mode |= AUOK190X_UPDATE_NONFLASH;
auok1900_update_region(par, mode, 0, par->info->var.yres);
par->update_cnt = 0;
}
static bool auok1900fb_need_refresh(struct auok190xfb_par *par)
{
return (par->update_cnt > 10);
}
static int auok1900fb_probe(struct platform_device *pdev)
{
struct auok190x_init_data init;
struct auok190x_board *board;
/* pick up board specific routines */
board = pdev->dev.platform_data;
if (!board)
return -EINVAL;
/* fill temporary init struct for common init */
init.id = "auo_k1900fb";
init.board = board;
init.update_partial = auok1900fb_dpy_update_pages;
init.update_all = auok1900fb_dpy_update;
init.need_refresh = auok1900fb_need_refresh;
init.init = auok1900_init;
return auok190x_common_probe(pdev, &init);
}
static int auok1900fb_remove(struct platform_device *pdev)
{
return auok190x_common_remove(pdev);
}
static struct platform_driver auok1900fb_driver = {
.probe = auok1900fb_probe,
.remove = auok1900fb_remove,
.driver = {
.name = "auo_k1900fb",
.pm = &auok190x_pm,
},
};
module_platform_driver(auok1900fb_driver);
MODULE_DESCRIPTION("framebuffer driver for the AUO-K1900 EPD controller");
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
MODULE_LICENSE("GPL");
/*
* auok190xfb.c -- FB driver for AUO-K1901 controllers
*
* Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
*
* based on broadsheetfb.c
*
* Copyright (C) 2008, Jaya Kumar
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
*
* This driver is written to be used with the AUO-K1901 display controller.
*
* It is intended to be architecture independent. A board specific driver
* must be used to perform all the physical IO interactions.
*
* The controller supports different update modes:
* mode0+1 16 step gray (4bit)
* mode2+3 4 step gray (2bit)
* mode4+5 2 step gray (1bit)
* - mode4 is described as "without LUT"
* mode7 automatic selection of update mode
*
* The most interesting difference to the K1900 is the ability to do screen
* updates in an asynchronous fashion. Where the K1900 needs to wait for the
* current update to complete, the K1901 can process later updates already.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/firmware.h>
#include <linux/gpio.h>
#include <linux/pm_runtime.h>
#include <video/auo_k190xfb.h>
#include "auo_k190x.h"
/*
* AUO-K1901 specific commands
*/
#define AUOK1901_CMD_LUT_INTERFACE 0x0005
#define AUOK1901_CMD_DMA_START 0x1001
#define AUOK1901_CMD_CURSOR_START 0x1007
#define AUOK1901_CMD_CURSOR_STOP AUOK190X_CMD_DATA_STOP
#define AUOK1901_CMD_DDMA_START 0x1009
#define AUOK1901_INIT_GATE_PULSE_LOW (0 << 14)
#define AUOK1901_INIT_GATE_PULSE_HIGH (1 << 14)
#define AUOK1901_INIT_SINGLE_GATE (0 << 13)
#define AUOK1901_INIT_DOUBLE_GATE (1 << 13)
/* Bits to pixels
* Mode 15-12 11-8 7-4 3-0
* format2 2 T 1 T
* format3 1 T 2 T
* format4 T 2 T 1
* format5 T 1 T 2
*
* halftone modes:
* format6 2 2 1 1
* format7 1 1 2 2
*/
#define AUOK1901_INIT_FORMAT2 (1 << 7)
#define AUOK1901_INIT_FORMAT3 ((1 << 7) | (1 << 6))
#define AUOK1901_INIT_FORMAT4 (1 << 8)
#define AUOK1901_INIT_FORMAT5 ((1 << 8) | (1 << 6))
#define AUOK1901_INIT_FORMAT6 ((1 << 8) | (1 << 7))
#define AUOK1901_INIT_FORMAT7 ((1 << 8) | (1 << 7) | (1 << 6))
/* res[4] to bit 10
* res[3-0] to bits 5-2
*/
#define AUOK1901_INIT_RESOLUTION(_res) (((_res & (1 << 4)) << 6) \
| ((_res & 0xf) << 2))
/*
* portrait / landscape orientation in AUOK1901_CMD_DMA_START
*/
#define AUOK1901_DMA_ROTATE90(_rot) ((_rot & 1) << 13)
/*
* equivalent to 1 << 11, needs the ~ to have same rotation like K1900
*/
#define AUOK1901_DDMA_ROTATE180(_rot) ((~_rot & 2) << 10)
static void auok1901_init(struct auok190xfb_par *par)
{
struct device *dev = par->info->device;
struct auok190x_board *board = par->board;
u16 init_param = 0;
pm_runtime_get_sync(dev);
init_param |= AUOK190X_INIT_INVERSE_WHITE;
init_param |= AUOK190X_INIT_FORMAT0;
init_param |= AUOK1901_INIT_RESOLUTION(par->resolution);
init_param |= AUOK190X_INIT_SHIFT_LEFT;
auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);
/* let the controller finish */
board->wait_for_rdy(par);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
static void auok1901_update_region(struct auok190xfb_par *par, int mode,
u16 y1, u16 y2)
{
struct device *dev = par->info->device;
unsigned char *buf = (unsigned char *)par->info->screen_base;
int xres = par->info->var.xres;
int line_length = par->info->fix.line_length;
u16 args[5];
pm_runtime_get_sync(dev);
mutex_lock(&(par->io_lock));
/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
y1 &= 0xfffe;
y2 &= 0xfffe;
dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
1, y1+1, xres, y2-y1, mode);
/* K1901: first transfer the region data */
args[0] = AUOK1901_DMA_ROTATE90(par->rotation) | 1;
args[1] = y1 + 1;
args[2] = xres;
args[3] = y2 - y1;
buf += y1 * line_length;
auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4,
args, ((y2 - y1) * line_length)/2,
(u16 *) buf);
auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP);
/* K1901: second tell the controller to update the region with mode */
args[0] = mode | AUOK1901_DDMA_ROTATE180(par->rotation);
args[1] = 1;
args[2] = y1 + 1;
args[3] = xres;
args[4] = y2 - y1;
auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args);
par->update_cnt++;
mutex_unlock(&(par->io_lock));
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par,
u16 y1, u16 y2)
{
int mode;
if (par->update_mode < 0) {
mode = AUOK190X_UPDATE_MODE(1);
par->last_mode = -1;
} else {
mode = AUOK190X_UPDATE_MODE(par->update_mode);
par->last_mode = par->update_mode;
}
if (par->flash)
mode |= AUOK190X_UPDATE_NONFLASH;
auok1901_update_region(par, mode, y1, y2);
}
static void auok1901fb_dpy_update(struct auok190xfb_par *par)
{
int mode;
/* When doing full updates, wait for the controller to be ready
* This will hopefully catch some hangs of the K1901
*/
par->board->wait_for_rdy(par);
if (par->update_mode < 0) {
mode = AUOK190X_UPDATE_MODE(0);
par->last_mode = -1;
} else {
mode = AUOK190X_UPDATE_MODE(par->update_mode);
par->last_mode = par->update_mode;
}
if (par->flash)
mode |= AUOK190X_UPDATE_NONFLASH;
auok1901_update_region(par, mode, 0, par->info->var.yres);
par->update_cnt = 0;
}
static bool auok1901fb_need_refresh(struct auok190xfb_par *par)
{
return (par->update_cnt > 10);
}
static int auok1901fb_probe(struct platform_device *pdev)
{
struct auok190x_init_data init;
struct auok190x_board *board;
/* pick up board specific routines */
board = pdev->dev.platform_data;
if (!board)
return -EINVAL;
/* fill temporary init struct for common init */
init.id = "auo_k1901fb";
init.board = board;
init.update_partial = auok1901fb_dpy_update_pages;
init.update_all = auok1901fb_dpy_update;
init.need_refresh = auok1901fb_need_refresh;
init.init = auok1901_init;
return auok190x_common_probe(pdev, &init);
}
static int auok1901fb_remove(struct platform_device *pdev)
{
return auok190x_common_remove(pdev);
}
static struct platform_driver auok1901fb_driver = {
.probe = auok1901fb_probe,
.remove = auok1901fb_remove,
.driver = {
.name = "auo_k1901fb",
.pm = &auok190x_pm,
},
};
module_platform_driver(auok1901fb_driver);
MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller");
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
MODULE_LICENSE("GPL");
This diff is collapsed.
/*
* Private common definitions for AUO-K190X framebuffer drivers
*
* Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* I80 interface specific defines
*/
#define AUOK190X_I80_CS 0x01
#define AUOK190X_I80_DC 0x02
#define AUOK190X_I80_WR 0x03
#define AUOK190X_I80_OE 0x04
/*
* AUOK190x commands, common to both controllers
*/
#define AUOK190X_CMD_INIT 0x0000
#define AUOK190X_CMD_STANDBY 0x0001
#define AUOK190X_CMD_WAKEUP 0x0002
#define AUOK190X_CMD_TCON_RESET 0x0003
#define AUOK190X_CMD_DATA_STOP 0x1002
#define AUOK190X_CMD_LUT_START 0x1003
#define AUOK190X_CMD_DISP_REFRESH 0x1004
#define AUOK190X_CMD_DISP_RESET 0x1005
#define AUOK190X_CMD_PRE_DISPLAY_START 0x100D
#define AUOK190X_CMD_PRE_DISPLAY_STOP 0x100F
#define AUOK190X_CMD_FLASH_W 0x2000
#define AUOK190X_CMD_FLASH_E 0x2001
#define AUOK190X_CMD_FLASH_STS 0x2002
#define AUOK190X_CMD_FRAMERATE 0x3000
#define AUOK190X_CMD_READ_VERSION 0x4000
#define AUOK190X_CMD_READ_STATUS 0x4001
#define AUOK190X_CMD_READ_LUT 0x4003
#define AUOK190X_CMD_DRIVERTIMING 0x5000
#define AUOK190X_CMD_LBALANCE 0x5001
#define AUOK190X_CMD_AGINGMODE 0x6000
#define AUOK190X_CMD_AGINGEXIT 0x6001
/*
* Common settings for AUOK190X_CMD_INIT
*/
#define AUOK190X_INIT_DATA_FILTER (0 << 12)
#define AUOK190X_INIT_DATA_BYPASS (1 << 12)
#define AUOK190X_INIT_INVERSE_WHITE (0 << 9)
#define AUOK190X_INIT_INVERSE_BLACK (1 << 9)
#define AUOK190X_INIT_SCAN_DOWN (0 << 1)
#define AUOK190X_INIT_SCAN_UP (1 << 1)
#define AUOK190X_INIT_SHIFT_LEFT (0 << 0)
#define AUOK190X_INIT_SHIFT_RIGHT (1 << 0)
/* Common bits to pixels
* Mode 15-12 11-8 7-4 3-0
* format0 4 3 2 1
* format1 3 4 1 2
*/
#define AUOK190X_INIT_FORMAT0 0
#define AUOK190X_INIT_FORMAT1 (1 << 6)
/*
* settings for AUOK190X_CMD_RESET
*/
#define AUOK190X_RESET_TCON (0 << 0)
#define AUOK190X_RESET_NORMAL (1 << 0)
#define AUOK190X_RESET_PON (1 << 1)
/*
* AUOK190X_CMD_VERSION
*/
#define AUOK190X_VERSION_TEMP_MASK (0x1ff)
#define AUOK190X_VERSION_EPD_MASK (0xff)
#define AUOK190X_VERSION_SIZE_INT(_val) ((_val & 0xfc00) >> 10)
#define AUOK190X_VERSION_SIZE_FLOAT(_val) ((_val & 0x3c0) >> 6)
#define AUOK190X_VERSION_MODEL(_val) (_val & 0x3f)
#define AUOK190X_VERSION_LUT(_val) (_val & 0xff)
#define AUOK190X_VERSION_TCON(_val) ((_val & 0xff00) >> 8)
/*
* update modes for CMD_PARTIALDISP on K1900 and CMD_DDMA on K1901
*/
#define AUOK190X_UPDATE_MODE(_res) ((_res & 0x7) << 12)
#define AUOK190X_UPDATE_NONFLASH (1 << 15)
/*
* track panel specific parameters for common init
*/
struct auok190x_init_data {
char *id;
struct auok190x_board *board;
void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2);
void (*update_all)(struct auok190xfb_par *par);
bool (*need_refresh)(struct auok190xfb_par *par);
void (*init)(struct auok190xfb_par *par);
};
extern void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data);
extern int auok190x_send_command(struct auok190xfb_par *par, u16 data);
extern void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd,
int argc, u16 *argv);
extern int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd,
int argc, u16 *argv);
extern void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par,
u16 cmd, int argc, u16 *argv,
int size, u16 *data);
extern int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd,
int argc, u16 *argv, int size,
u16 *data);
extern int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd,
int argc, u16 *argv);
extern int auok190x_common_probe(struct platform_device *pdev,
struct auok190x_init_data *init);
extern int auok190x_common_remove(struct platform_device *pdev);
extern const struct dev_pm_ops auok190x_pm;
/*
* Definitions for AUO-K190X framebuffer drivers
*
* Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _LINUX_VIDEO_AUO_K190XFB_H_
#define _LINUX_VIDEO_AUO_K190XFB_H_
/* Controller standby command needs a param */
#define AUOK190X_QUIRK_STANDBYPARAM (1 << 0)
/* Controller standby is completely broken */
#define AUOK190X_QUIRK_STANDBYBROKEN (1 << 1)
/*
* Resolutions for the displays
*/
#define AUOK190X_RESOLUTION_800_600 0
#define AUOK190X_RESOLUTION_1024_768 1
#define AUOK190X_RESOLUTION_600_800 4
#define AUOK190X_RESOLUTION_768_1024 5
/*
* struct used by auok190x. board specific stuff comes from *board
*/
struct auok190xfb_par {
struct fb_info *info;
struct auok190x_board *board;
struct regulator *regulator;
struct mutex io_lock;
struct delayed_work work;
wait_queue_head_t waitq;
int resolution;
int rotation;
int consecutive_threshold;
int update_cnt;
/* panel and controller informations */
int epd_type;
int panel_size_int;
int panel_size_float;
int panel_model;
int tcon_version;
int lut_version;
/* individual controller callbacks */
void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2);
void (*update_all)(struct auok190xfb_par *par);
bool (*need_refresh)(struct auok190xfb_par *par);
void (*init)(struct auok190xfb_par *par);
void (*recover)(struct auok190xfb_par *par);
int update_mode; /* mode to use for updates */
int last_mode; /* update mode last used */
int flash;
/* power management */
int autosuspend_delay;
bool standby;
bool manual_standby;
};
/**
* Board specific platform-data
* @init: initialize the controller interface
* @cleanup: cleanup the controller interface
* @wait_for_rdy: wait until the controller is not busy anymore
* @set_ctl: change an interface control
* @set_hdb: write a value to the data register
* @get_hdb: read a value from the data register
* @setup_irq: method to setup the irq handling on the busy gpio
* @gpio_nsleep: sleep gpio
* @gpio_nrst: reset gpio
* @gpio_nbusy: busy gpio
* @resolution: one of the AUOK190X_RESOLUTION constants
* @rotation: rotation of the framebuffer
* @quirks: controller quirks to honor
* @fps: frames per second for defio
*/
struct auok190x_board {
int (*init)(struct auok190xfb_par *);
void (*cleanup)(struct auok190xfb_par *);
int (*wait_for_rdy)(struct auok190xfb_par *);
void (*set_ctl)(struct auok190xfb_par *, unsigned char, u8);
void (*set_hdb)(struct auok190xfb_par *, u16);
u16 (*get_hdb)(struct auok190xfb_par *);
int (*setup_irq)(struct fb_info *);
int gpio_nsleep;
int gpio_nrst;
int gpio_nbusy;
int resolution;
int quirks;
int fps;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment