Skip to content

L
linux
Commit 76c224bc authored by Auke Kok's avatar Auke Kok Committed by Auke Kok
Browse files
Options

e1000: remove leading and trailing whitespace. 

Some leading and trailing whitespace made it into the driver code here.
Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
parent a42a507c
Hide whitespace changes
Inline Side-by-side
Showing with 81 additions and 81 deletions
drivers/net/e1000/e1000_ethtool.c
View file @ 76c224bc
...@@ -865,15 +865,15 @@ static int ...@@ -865,15 +865,15 @@ static int
e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
{ {
struct net_device *netdev = adapter->netdev; struct net_device *netdev = adapter->netdev;
uint32_t mask, i=0, shared_int = TRUE; uint32_t mask, i=0, shared_int = TRUE;
uint32_t irq = adapter->pdev->irq; uint32_t irq = adapter->pdev->irq;
*data = 0; *data = 0;
/* Hook up test interrupt handler just for this test */ /* Hook up test interrupt handler just for this test */
if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
shared_int = FALSE; shared_int = FALSE;
} else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ, } else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
netdev->name, netdev)){ netdev->name, netdev)){
*data = 1; *data = 1;
return -1; return -1;
...@@ -889,22 +889,22 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) ...@@ -889,22 +889,22 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
/* Interrupt to test */ /* Interrupt to test */
mask = 1 << i; mask = 1 << i;
if (!shared_int) { if (!shared_int) {
/* Disable the interrupt to be reported in /* Disable the interrupt to be reported in
* the cause register and then force the same * the cause register and then force the same
* interrupt and see if one gets posted. If * interrupt and see if one gets posted. If
* an interrupt was posted to the bus, the * an interrupt was posted to the bus, the
* test failed. * test failed.
*/ */
adapter->test_icr = 0; adapter->test_icr = 0;
E1000_WRITE_REG(&adapter->hw, IMC, mask); E1000_WRITE_REG(&adapter->hw, IMC, mask);
E1000_WRITE_REG(&adapter->hw, ICS, mask); E1000_WRITE_REG(&adapter->hw, ICS, mask);
msec_delay(10); msec_delay(10);
if (adapter->test_icr & mask) { if (adapter->test_icr & mask) {
*data = 3; *data = 3;
break; break;
} }
} }
/* Enable the interrupt to be reported in /* Enable the interrupt to be reported in
...@@ -923,7 +923,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) ...@@ -923,7 +923,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
break; break;
} }
if (!shared_int) { if (!shared_int) {
/* Disable the other interrupts to be reported in /* Disable the other interrupts to be reported in
* the cause register and then force the other * the cause register and then force the other
* interrupts and see if any get posted. If * interrupts and see if any get posted. If
......
drivers/net/e1000/e1000_hw.c
View file @ 76c224bc
...@@ -765,7 +765,7 @@ e1000_init_hw(struct e1000_hw *hw) ...@@ -765,7 +765,7 @@ e1000_init_hw(struct e1000_hw *hw)
} }
if (hw->mac_type == e1000_82573) { if (hw->mac_type == e1000_82573) {
e1000_enable_tx_pkt_filtering(hw); e1000_enable_tx_pkt_filtering(hw);
} }
switch (hw->mac_type) { switch (hw->mac_type) {
...@@ -861,7 +861,7 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw) ...@@ -861,7 +861,7 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
if(eeprom_data != EEPROM_RESERVED_WORD) { if(eeprom_data != EEPROM_RESERVED_WORD) {
/* Adjust SERDES output amplitude only. */ /* Adjust SERDES output amplitude only. */
eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK; eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data); ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
if(ret_val) if(ret_val)
return ret_val; return ret_val;
...@@ -1228,7 +1228,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) ...@@ -1228,7 +1228,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw)
if (hw->phy_reset_disable) if (hw->phy_reset_disable)
return E1000_SUCCESS; return E1000_SUCCESS;
ret_val = e1000_phy_reset(hw); ret_val = e1000_phy_reset(hw);
if (ret_val) { if (ret_val) {
DEBUGOUT("Error Resetting the PHY\n"); DEBUGOUT("Error Resetting the PHY\n");
...@@ -1370,7 +1370,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) ...@@ -1370,7 +1370,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw)
DEBUGFUNC("e1000_copper_link_ggp_setup"); DEBUGFUNC("e1000_copper_link_ggp_setup");
if(!hw->phy_reset_disable) { if(!hw->phy_reset_disable) {
/* Enable CRS on TX for half-duplex operation. */ /* Enable CRS on TX for half-duplex operation. */
ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
&phy_data); &phy_data);
...@@ -1519,7 +1519,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw) ...@@ -1519,7 +1519,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw)
if(hw->phy_reset_disable) if(hw->phy_reset_disable)
return E1000_SUCCESS; return E1000_SUCCESS;
/* Enable CRS on TX. This must be set for half-duplex operation. */ /* Enable CRS on TX. This must be set for half-duplex operation. */
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
if(ret_val) if(ret_val)
...@@ -1665,7 +1665,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) ...@@ -1665,7 +1665,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw)
* collision distance in the Transmit Control Register. * collision distance in the Transmit Control Register.
* 2) Set up flow control on the MAC to that established with * 2) Set up flow control on the MAC to that established with
* the link partner. * the link partner.
* 3) Config DSP to improve Gigabit link quality for some PHY revisions. * 3) Config DSP to improve Gigabit link quality for some PHY revisions.
* *
* hw - Struct containing variables accessed by shared code * hw - Struct containing variables accessed by shared code
******************************************************************************/ ******************************************************************************/
...@@ -1674,7 +1674,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw) ...@@ -1674,7 +1674,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
{ {
int32_t ret_val; int32_t ret_val;
DEBUGFUNC("e1000_copper_link_postconfig"); DEBUGFUNC("e1000_copper_link_postconfig");
if(hw->mac_type >= e1000_82544) { if(hw->mac_type >= e1000_82544) {
e1000_config_collision_dist(hw); e1000_config_collision_dist(hw);
} else { } else {
...@@ -1698,7 +1698,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw) ...@@ -1698,7 +1698,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw)
return ret_val; return ret_val;
} }
} }
return E1000_SUCCESS; return E1000_SUCCESS;
} }
...@@ -1754,11 +1754,11 @@ e1000_setup_copper_link(struct e1000_hw *hw) ...@@ -1754,11 +1754,11 @@ e1000_setup_copper_link(struct e1000_hw *hw)
} }
if(hw->autoneg) { if(hw->autoneg) {
/* Setup autoneg and flow control advertisement /* Setup autoneg and flow control advertisement
* and perform autonegotiation */ * and perform autonegotiation */
ret_val = e1000_copper_link_autoneg(hw); ret_val = e1000_copper_link_autoneg(hw);
if(ret_val) if(ret_val)
return ret_val; return ret_val;
} else { } else {
/* PHY will be set to 10H, 10F, 100H,or 100F /* PHY will be set to 10H, 10F, 100H,or 100F
* depending on value from forced_speed_duplex. */ * depending on value from forced_speed_duplex. */
...@@ -1786,7 +1786,7 @@ e1000_setup_copper_link(struct e1000_hw *hw) ...@@ -1786,7 +1786,7 @@ e1000_setup_copper_link(struct e1000_hw *hw)
ret_val = e1000_copper_link_postconfig(hw); ret_val = e1000_copper_link_postconfig(hw);
if(ret_val) if(ret_val)
return ret_val; return ret_val;
DEBUGOUT("Valid link established!!!\n"); DEBUGOUT("Valid link established!!!\n");
return E1000_SUCCESS; return E1000_SUCCESS;
} }
...@@ -1984,7 +1984,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) ...@@ -1984,7 +1984,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw)
DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
if(ret_val) if(ret_val)
return ret_val; return ret_val;
...@@ -2273,7 +2273,7 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) ...@@ -2273,7 +2273,7 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
DEBUGFUNC("e1000_config_mac_to_phy"); DEBUGFUNC("e1000_config_mac_to_phy");
/* 82544 or newer MAC, Auto Speed Detection takes care of /* 82544 or newer MAC, Auto Speed Detection takes care of
* MAC speed/duplex configuration.*/ * MAC speed/duplex configuration.*/
if (hw->mac_type >= e1000_82544) if (hw->mac_type >= e1000_82544)
return E1000_SUCCESS; return E1000_SUCCESS;
...@@ -2292,9 +2292,9 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) ...@@ -2292,9 +2292,9 @@ e1000_config_mac_to_phy(struct e1000_hw *hw)
if(ret_val) if(ret_val)
return ret_val; return ret_val;
if(phy_data & M88E1000_PSSR_DPLX) if(phy_data & M88E1000_PSSR_DPLX)
ctrl |= E1000_CTRL_FD; ctrl |= E1000_CTRL_FD;
else else
ctrl &= ~E1000_CTRL_FD; ctrl &= ~E1000_CTRL_FD;
e1000_config_collision_dist(hw); e1000_config_collision_dist(hw);
...@@ -2884,7 +2884,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, ...@@ -2884,7 +2884,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw,
} }
} }
if ((hw->mac_type == e1000_80003es2lan) && if ((hw->mac_type == e1000_80003es2lan) &&
(hw->media_type == e1000_media_type_copper)) { (hw->media_type == e1000_media_type_copper)) {
if (*speed == SPEED_1000) if (*speed == SPEED_1000)
ret_val = e1000_configure_kmrn_for_1000(hw); ret_val = e1000_configure_kmrn_for_1000(hw);
...@@ -3160,7 +3160,7 @@ e1000_read_phy_reg(struct e1000_hw *hw, ...@@ -3160,7 +3160,7 @@ e1000_read_phy_reg(struct e1000_hw *hw,
if (e1000_swfw_sync_acquire(hw, swfw)) if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC; return -E1000_ERR_SWFW_SYNC;
if((hw->phy_type == e1000_phy_igp || if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) && hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) { (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
...@@ -3299,7 +3299,7 @@ e1000_write_phy_reg(struct e1000_hw *hw, ...@@ -3299,7 +3299,7 @@ e1000_write_phy_reg(struct e1000_hw *hw,
if (e1000_swfw_sync_acquire(hw, swfw)) if (e1000_swfw_sync_acquire(hw, swfw))
return -E1000_ERR_SWFW_SYNC; return -E1000_ERR_SWFW_SYNC;
if((hw->phy_type == e1000_phy_igp || if((hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) && hw->phy_type == e1000_phy_igp_2) &&
(reg_addr > MAX_PHY_MULTI_PAGE_REG)) { (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
...@@ -3497,22 +3497,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw) ...@@ -3497,22 +3497,22 @@ e1000_phy_hw_reset(struct e1000_hw *hw)
} }
/* Read the device control register and assert the E1000_CTRL_PHY_RST /* Read the device control register and assert the E1000_CTRL_PHY_RST
* bit. Then, take it out of reset. * bit. Then, take it out of reset.
* For pre-e1000_82571 hardware, we delay for 10ms between the assert * For pre-e1000_82571 hardware, we delay for 10ms between the assert
* and deassert. For e1000_82571 hardware and later, we instead delay * and deassert. For e1000_82571 hardware and later, we instead delay
* for 50us between and 10ms after the deassertion. * for 50us between and 10ms after the deassertion.
*/ */
ctrl = E1000_READ_REG(hw, CTRL); ctrl = E1000_READ_REG(hw, CTRL);
E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST);
E1000_WRITE_FLUSH(hw); E1000_WRITE_FLUSH(hw);
if (hw->mac_type < e1000_82571) if (hw->mac_type < e1000_82571)
msec_delay(10); msec_delay(10);
else else
udelay(100); udelay(100);
E1000_WRITE_REG(hw, CTRL, ctrl); E1000_WRITE_REG(hw, CTRL, ctrl);
E1000_WRITE_FLUSH(hw); E1000_WRITE_FLUSH(hw);
if (hw->mac_type >= e1000_82571) if (hw->mac_type >= e1000_82571)
msec_delay(10); msec_delay(10);
e1000_swfw_sync_release(hw, swfw); e1000_swfw_sync_release(hw, swfw);
...@@ -3816,7 +3816,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, ...@@ -3816,7 +3816,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw,
/* Check polarity status */ /* Check polarity status */
ret_val = e1000_check_polarity(hw, &polarity); ret_val = e1000_check_polarity(hw, &polarity);
if(ret_val) if(ret_val)
return ret_val; return ret_val;
phy_info->cable_polarity = polarity; phy_info->cable_polarity = polarity;
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
...@@ -4541,14 +4541,14 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw, ...@@ -4541,14 +4541,14 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw,
E1000_WRITE_REG(hw, EERD, eerd); E1000_WRITE_REG(hw, EERD, eerd);
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
if(error) { if(error) {
break; break;
} }
data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA); data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA);
} }
return error; return error;
} }
...@@ -4574,24 +4574,24 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw, ...@@ -4574,24 +4574,24 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw,
return -E1000_ERR_SWFW_SYNC; return -E1000_ERR_SWFW_SYNC;
for (i = 0; i < words; i++) { for (i = 0; i < words; i++) {
register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) | register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) | ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
E1000_EEPROM_RW_REG_START; E1000_EEPROM_RW_REG_START;
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
if(error) { if(error) {
break; break;
} }
E1000_WRITE_REG(hw, EEWR, register_value); E1000_WRITE_REG(hw, EEWR, register_value);
error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
if(error) { if(error) {
break; break;
} }
} }
e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
return error; return error;
} }
...@@ -4611,7 +4611,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) ...@@ -4611,7 +4611,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
for(i = 0; i < attempts; i++) { for(i = 0; i < attempts; i++) {
if(eerd == E1000_EEPROM_POLL_READ) if(eerd == E1000_EEPROM_POLL_READ)
reg = E1000_READ_REG(hw, EERD); reg = E1000_READ_REG(hw, EERD);
else else
reg = E1000_READ_REG(hw, EEWR); reg = E1000_READ_REG(hw, EEWR);
if(reg & E1000_EEPROM_RW_REG_DONE) { if(reg & E1000_EEPROM_RW_REG_DONE) {
...@@ -5136,7 +5136,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, ...@@ -5136,7 +5136,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw,
uint32_t i; uint32_t i;
uint32_t num_rar_entry; uint32_t num_rar_entry;
uint32_t num_mta_entry; uint32_t num_mta_entry;
DEBUGFUNC("e1000_mc_addr_list_update"); DEBUGFUNC("e1000_mc_addr_list_update");
/* Set the new number of MC addresses that we are being requested to use. */ /* Set the new number of MC addresses that we are being requested to use. */
...@@ -6241,7 +6241,7 @@ e1000_check_polarity(struct e1000_hw *hw, ...@@ -6241,7 +6241,7 @@ e1000_check_polarity(struct e1000_hw *hw,
* 1 - Downshift ocured. * 1 - Downshift ocured.
* *
* returns: - E1000_ERR_XXX * returns: - E1000_ERR_XXX
* E1000_SUCCESS * E1000_SUCCESS
* *
* For phy's older then IGP, this function reads the Downshift bit in the Phy * For phy's older then IGP, this function reads the Downshift bit in the Phy
* Specific Status register. For IGP phy's, it reads the Downgrade bit in the * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
...@@ -6256,7 +6256,7 @@ e1000_check_downshift(struct e1000_hw *hw) ...@@ -6256,7 +6256,7 @@ e1000_check_downshift(struct e1000_hw *hw)
DEBUGFUNC("e1000_check_downshift"); DEBUGFUNC("e1000_check_downshift");
if(hw->phy_type == e1000_phy_igp || if(hw->phy_type == e1000_phy_igp ||
hw->phy_type == e1000_phy_igp_2) { hw->phy_type == e1000_phy_igp_2) {
ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
&phy_data); &phy_data);
...@@ -6685,8 +6685,8 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, ...@@ -6685,8 +6685,8 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw,
} else { } else {
phy_data |= IGP02E1000_PM_D0_LPLU; phy_data |= IGP02E1000_PM_D0_LPLU;
ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
if (ret_val) if (ret_val)
return ret_val; return ret_val;
...@@ -6778,7 +6778,7 @@ int32_t ...@@ -6778,7 +6778,7 @@ int32_t
e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
{ {
uint8_t i; uint8_t i;
uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET; uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET;
uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH; uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH;
length = (length >> 2); length = (length >> 2);
...@@ -6797,7 +6797,7 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) ...@@ -6797,7 +6797,7 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer)
* and also checks whether the previous command is completed. * and also checks whether the previous command is completed.
* It busy waits in case of previous command is not completed. * It busy waits in case of previous command is not completed.
* *
* returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
* timeout * timeout
* - E1000_SUCCESS for success. * - E1000_SUCCESS for success.
****************************************************************************/ ****************************************************************************/
...@@ -6821,7 +6821,7 @@ e1000_mng_enable_host_if(struct e1000_hw * hw) ...@@ -6821,7 +6821,7 @@ e1000_mng_enable_host_if(struct e1000_hw * hw)
msec_delay_irq(1); msec_delay_irq(1);
} }
if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
DEBUGOUT("Previous command timeout failed .\n"); DEBUGOUT("Previous command timeout failed .\n");
return -E1000_ERR_HOST_INTERFACE_COMMAND; return -E1000_ERR_HOST_INTERFACE_COMMAND;
} }
......
drivers/net/e1000/e1000_hw.h
View file @ 76c224bc
...@@ -375,7 +375,7 @@ struct e1000_host_mng_dhcp_cookie{ ...@@ -375,7 +375,7 @@ struct e1000_host_mng_dhcp_cookie{
}; };
#endif #endif
int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
uint16_t length); uint16_t length);
boolean_t e1000_check_mng_mode(struct e1000_hw *hw); boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
...@@ -1802,7 +1802,7 @@ struct e1000_hw { ...@@ -1802,7 +1802,7 @@ struct e1000_hw {
* value2 = [0..64512], default=4096 * value2 = [0..64512], default=4096
* value3 = [0..64512], default=0 * value3 = [0..64512], default=0
*/ */
#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F #define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 #define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 #define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
......
drivers/net/e1000/e1000_main.c
View file @ 76c224bc
...@@ -349,7 +349,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter) ...@@ -349,7 +349,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter)
* For ASF and Pass Through versions of f/w this means that the * For ASF and Pass Through versions of f/w this means that the
* driver is no longer loaded. For AMT version (only with 82573) i * driver is no longer loaded. For AMT version (only with 82573) i
* of the f/w this means that the netowrk i/f is closed. * of the f/w this means that the netowrk i/f is closed.
* *
**/ **/
static void static void
...@@ -381,10 +381,10 @@ e1000_release_hw_control(struct e1000_adapter *adapter) ...@@ -381,10 +381,10 @@ e1000_release_hw_control(struct e1000_adapter *adapter)
* @adapter: address of board private structure * @adapter: address of board private structure
* *
* e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that * For ASF and Pass Through versions of f/w this means that
* the driver is loaded. For AMT version (only with 82573) * the driver is loaded. For AMT version (only with 82573)
* of the f/w this means that the netowrk i/f is open. * of the f/w this means that the netowrk i/f is open.
* *
**/ **/
static void static void
...@@ -714,8 +714,8 @@ e1000_probe(struct pci_dev *pdev, ...@@ -714,8 +714,8 @@ e1000_probe(struct pci_dev *pdev,
DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
/* if ksp3, indicate if it's port a being setup */ /* if ksp3, indicate if it's port a being setup */
if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 && if (pdev->device == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 &&
e1000_ksp3_port_a == 0) e1000_ksp3_port_a == 0)
adapter->ksp3_port_a = 1; adapter->ksp3_port_a = 1;
e1000_ksp3_port_a++; e1000_ksp3_port_a++;
/* Reset for multiple KP3 adapters */ /* Reset for multiple KP3 adapters */
...@@ -743,9 +743,9 @@ e1000_probe(struct pci_dev *pdev, ...@@ -743,9 +743,9 @@ e1000_probe(struct pci_dev *pdev,
if (pci_using_dac) if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA; netdev->features |= NETIF_F_HIGHDMA;
/* hard_start_xmit is safe against parallel locking */ /* hard_start_xmit is safe against parallel locking */
netdev->features |= NETIF_F_LLTX; netdev->features |= NETIF_F_LLTX;
adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw); adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
/* before reading the EEPROM, reset the controller to /* before reading the EEPROM, reset the controller to
...@@ -2773,7 +2773,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) ...@@ -2773,7 +2773,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int nr_frags = 0; unsigned int nr_frags = 0;
unsigned int mss = 0; unsigned int mss = 0;
int count = 0; int count = 0;
int tso; int tso;
unsigned int f; unsigned int f;
len -= skb->data_len; len -= skb->data_len;
...@@ -2786,7 +2786,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) ...@@ -2786,7 +2786,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
#ifdef NETIF_F_TSO #ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->tso_size; mss = skb_shinfo(skb)->tso_size;
/* The controller does a simple calculation to /* The controller does a simple calculation to
* make sure there is enough room in the FIFO before * make sure there is enough room in the FIFO before
* initiating the DMA for each buffer. The calc is: * initiating the DMA for each buffer. The calc is:
* 4 = ceil(buffer len/mss). To make sure we don't * 4 = ceil(buffer len/mss). To make sure we don't
...@@ -2809,7 +2809,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) ...@@ -2809,7 +2809,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
case e1000_82573: case e1000_82573:
pull_size = min((unsigned int)4, skb->data_len); pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) { if (!__pskb_pull_tail(skb, pull_size)) {
printk(KERN_ERR printk(KERN_ERR
"__pskb_pull_tail failed.\n"); "__pskb_pull_tail failed.\n");
dev_kfree_skb_any(skb); dev_kfree_skb_any(skb);
return NETDEV_TX_OK; return NETDEV_TX_OK;
...@@ -3755,7 +3755,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, ...@@ -3755,7 +3755,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
* throughput, so unsplit small packets and save the alloc/put*/ * throughput, so unsplit small packets and save the alloc/put*/
if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) { if (l1 && ((length + l1) <= adapter->rx_ps_bsize0)) {
u8 *vaddr; u8 *vaddr;
/* there is no documentation about how to call /* there is no documentation about how to call
* kmap_atomic, so we can't hold the mapping * kmap_atomic, so we can't hold the mapping
* very long */ * very long */
pci_dma_sync_single_for_cpu(pdev, pci_dma_sync_single_for_cpu(pdev,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7