Merge flatcap.org:/home/flatcap/backup/bk/ntfs-2.6

into flatcap.org:/home/flatcap/backup/bk/ntfs-2.6-devel

Documentation/kbuild/makefiles.txt

@@ -6,7 +6,7 @@ This document describes the Linux kernel Makefiles.
 
 	=== 1 Overview
 	=== 2 Who does what
-	=== 3 The kbuild Makefiles
+	=== 3 The kbuild files
 	   --- 3.1 Goal definitions
 	   --- 3.2 Built-in object goals - obj-y
 	   --- 3.3 Loadable module goals - obj-m
@@ -101,11 +101,14 @@ These people need to know about all aspects of the kernel Makefiles.
 This document is aimed towards normal developers and arch developers.
 
 
-=== 3 The kbuild Makefiles
+=== 3 The kbuild files
 
 Most Makefiles within the kernel are kbuild Makefiles that use the
 kbuild infrastructure. This chapter introduce the syntax used in the
 kbuild makefiles.
+The preferred name for the kbuild files is 'Kbuild' but 'Makefile' will
+continue to be supported. All new developmen is expected to use the
+Kbuild filename.
 
 Section 3.1 "Goal definitions" is a quick intro, further chapters provide
 more details, with real examples.
@@ -707,15 +710,17 @@ When kbuild executes the following steps are followed (roughly):
 	probe supported options:
 
 		#arch/i386/Makefile
-		check_gcc = $(shell if $(CC) $(1) -S -o /dev/null -xc \
-		            /dev/null\ > /dev/null 2>&1; then echo "$(1)"; \
-		            else echo "$(2)"; fi)
-		cflags-$(CONFIG_MCYRIXIII) += $(call check_gcc,\
-		                                     -march=c3,-march=i486)
 
-		CFLAGS += $(cflags-y)
+		...
+		cflags-$(CONFIG_MPENTIUMII)     += $(call cc-option,\
+						-march=pentium2,-march=i686)
+		...
+		# Disable unit-at-a-time mode ...
+		CFLAGS += $(call cc-option,-fno-unit-at-a-time)
+		...
+
 
-	The above examples both utilise the trick that a config option expands
+	The first examples utilises the trick that a config option expands
 	to 'y' when selected.
 
     CFLAGS_KERNEL	$(CC) options specific for built-in

Makefile

@@ -156,7 +156,7 @@ localversion-files := $(wildcard $(objtree)/localversion* $(srctree)/localversio
 endif
 
 LOCALVERSION = $(subst $(space),, \
-	       $(shell cat /dev/null $(localversion-files)) \
+	       $(shell cat /dev/null $(localversion-files:%~=)) \
 	       $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
 
 KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
@@ -440,6 +440,12 @@ ifeq ($(config-targets),1)
 # *config targets only - make sure prerequisites are updated, and descend
 # in scripts/kconfig to make the *config target
 
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'
+include $(srctree)/arch/$(ARCH)/Makefile
+export KBUILD_DEFCONFIG
+
 config: scripts_basic outputmakefile FORCE
 	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 %config: scripts_basic outputmakefile FORCE

arch/arm/Makefile

@@ -13,6 +13,10 @@ OBJCOPYFLAGS	:=-O binary -R .note -R .comment -S
 GZFLAGS		:=-9
 #CFLAGS		+=-pipe
 
+# Do not use arch/arm/defconfig - it's always outdated.
+# Select a platform tht is kept up-to-date
+KBUILD_DEFCONFIG := versatile_defconfig
+
 ifeq ($(CONFIG_FRAME_POINTER),y)
 CFLAGS		+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
 endif

arch/i386/kernel/process.c

@@ -28,7 +28,7 @@
 #include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/config.h>
-#include <linux/version.h>
+#include <linux/utsname.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
@@ -230,7 +230,8 @@ void show_regs(struct pt_regs * regs)
 
 	if (regs->xcs & 3)
 		printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp);
-	printk(" EFLAGS: %08lx    %s  (%s)\n",regs->eflags, print_tainted(),UTS_RELEASE);
+	printk(" EFLAGS: %08lx    %s  (%s)\n",
+	       regs->eflags, print_tainted(), system_utsname.release);
 	printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
 		regs->eax,regs->ebx,regs->ecx,regs->edx);
 	printk("ESI: %08lx EDI: %08lx EBP: %08lx",

arch/i386/kernel/traps.c

@@ -25,7 +25,7 @@
 #include <linux/highmem.h>
 #include <linux/kallsyms.h>
 #include <linux/ptrace.h>
-#include <linux/version.h>
+#include <linux/utsname.h>
 #include <linux/kprobes.h>
 
 #ifdef CONFIG_EISA
@@ -218,7 +218,7 @@ void show_registers(struct pt_regs *regs)
 	printk("CPU:    %d\nEIP:    %04x:[<%08lx>]    %s VLI\nEFLAGS: %08lx"
 			"   (%s) \n",
 		smp_processor_id(), 0xffff & regs->xcs, regs->eip,
-		print_tainted(), regs->eflags, UTS_RELEASE);
+		print_tainted(), regs->eflags, system_utsname.release);
 	print_symbol("EIP is at %s\n", regs->eip);
 	printk("eax: %08lx   ebx: %08lx   ecx: %08lx   edx: %08lx\n",
 		regs->eax, regs->ebx, regs->ecx, regs->edx);

arch/m32r/Makefile

@@ -5,7 +5,6 @@
 LDFLAGS		:=
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux	:= -e startup_32
-LDFLAGS_BLOB	:= --format binary --oformat elf32-m32r
 
 CFLAGS += -pipe -fno-schedule-insns
 CFLAGS_KERNEL += -mmodel=medium

arch/m32r/boot/compressed/Makefile

@@ -28,9 +28,6 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.S FORCE
-	$(CPP) $(EXTRA_AFLAGS) -C -P -I include $< >$@
-
 LDFLAGS_piggy.o := -r --format binary --oformat elf32-m32r-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 

arch/ppc/8xx_io/Kconfig

@@ -74,37 +74,6 @@ config ENET_BIG_BUFFERS
 	  Allocate large buffers for MPC8xx Etherenet.  Increases throughput
 	  and decreases the likelihood of dropped packets, but costs memory.
 
-config SMC2_UART
-	bool "Use SMC2 for UART"
-	help
-	  If you would like to use SMC2 as a serial port, say Y here.
-
-	  If in doubt, say Y here.
-
-config ALTSMC2
-	bool "Use Alternate SMC2 I/O (823/850)"
-	depends on SMC2_UART
-	help
-	  If you have an MPC823 or MPC850 and would like to use the alternate
-	  SMC2 for I/O, say Y here.
-
-	  If in doubt, say N here.
-
-config CONS_SMC2
-	bool "Use SMC2 for Console"
-	depends on SMC2_UART
-	help
-	  If you are going to have a serial console on your device and are
-	  using SMC2 for your serial port, say Y here, else say N.
-
-config USE_SCC_IO
-	bool "Enable SCC2 and SCC3 for UART"
-	help
-	  If your MPC8xx board has other SCC ports that you would like to use
-	  for for a serial port, say Y here.
-
-	  If in doubt, say N here.
-
 config HTDMSOUND
 	bool "Embedded Planet HIOX Audio"
 	depends on SOUND=y
@@ -134,13 +103,36 @@ config 8xx_CPU6
 
 	  If in doubt, say N here.
 
-config UCODE_PATCH
-	bool "I2C/SPI Microcode Patch"
+choice
+	prompt "Microcode patch selection"
+	default NO_UCODE_PATCH
+	help
+	  Help not implemented yet, coming soon.
+
+config NO_UCODE_PATCH
+	bool "None"
+
+config USB_SOF_UCODE_PATCH
+	bool "USB SOF patch"
+	help
+	  Help not implemented yet, coming soon.
+
+config I2C_SPI_UCODE_PATCH
+	bool "I2C/SPI relocation patch"
 	help
-	  Motorola releases microcode updates for their 8xx CPM modules.  The
-	  microcode update file has updates for IIC, SMC and USB.  Currently only
-	  the USB update is available by default, if the MPC8xx USB option is
-	  enabled.  If in doubt, say 'N' here.
+	  Help not implemented yet, coming soon.
+
+config I2C_SPI_SMC1_UCODE_PATCH
+	bool "I2C/SPI/SMC1 relocation patch"
+	help
+	  Help not implemented yet, coming soon.
+
+endchoice
+
+config UCODE_PATCH
+	bool
+	default y
+	depends on !NO_UCODE_PATCH
 
 endmenu
 

arch/ppc/8xx_io/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux MPC8xx ppc-specific parts of comm processor
 #
 
-obj-y			:= commproc.o uart.o
+obj-y			:= commproc.o
 
 obj-$(CONFIG_FEC_ENET)	+= fec.o
 obj-$(CONFIG_SCC_ENET)	+= enet.o

arch/ppc/8xx_io/enet.c

@@ -38,6 +38,7 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
 #include <linux/bitops.h>
 
 #include <asm/8xx_immap.h>
@@ -581,10 +582,10 @@ static void set_multicast_list(struct net_device *dev)
 	
 		/* Log any net taps. */
 		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->sccp->scc_pmsr |= SCC_PMSR_PRO;
+		cep->sccp->scc_psmr |= SCC_PSMR_PRO;
 	} else {
 
-		cep->sccp->scc_pmsr &= ~SCC_PMSR_PRO;
+		cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
 
 		if (dev->flags & IFF_ALLMULTI) {
 			/* Catch all multicast addresses, so set the
@@ -835,7 +836,8 @@ static int __init scc_enet_init(void)
 
 		/* Allocate a page.
 		*/
-		ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr);
+		ba = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE,
+				&mem_addr, GFP_KERNEL);
 		/* BUG: no check for failure */
 
 		/* Initialize the BD for every fragment in the page.
@@ -889,7 +891,7 @@ static int __init scc_enet_init(void)
 	/* Set processing mode.  Use Ethernet CRC, catch broadcast, and
 	 * start frame search 22 bit times after RENA.
 	 */
-	sccp->scc_pmsr = (SCC_PMSR_ENCRC | SCC_PMSR_NIB22);
+	sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
 
 	/* It is now OK to enable the Ethernet transmitter.
 	 * Unfortunately, there are board implementation differences here.

arch/ppc/8xx_io/fec.c

@@ -1684,7 +1684,7 @@ static int __init fec_enet_init(void)
 
 	/* Install our interrupt handler.
 	*/
-	if (request_8xxirq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
+	if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
 		panic("Could not allocate FEC IRQ!");
 
 #ifdef CONFIG_RPXCLASSIC
@@ -1705,7 +1705,7 @@ static int __init fec_enet_init(void)
 	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
 		(0x80000000 >> PHY_INTERRUPT);
 
-	if (request_8xxirq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0)
+	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0)
 		panic("Could not allocate MII IRQ!");
 #endif
 

arch/ppc/8xx_io/micropatch.c

@@ -19,18 +19,12 @@
 #include <asm/8xx_immap.h>
 #include <asm/commproc.h>
 
-/* Define this to get SMC patches as well.  You need to modify the uart
- * driver as well......
-#define USE_SMC_PATCH 1
+/*
+ * I2C/SPI relocation patch arrays.
  */
 
-#ifdef CONFIG_USB_MPC8xx
-#define USE_USB_SOF_PATCH
-#endif
+#ifdef CONFIG_I2C_SPI_UCODE_PATCH
 
-#ifdef USE_IIC_PATCH
-#define PATCH_DEFINED
-	/* IIC/SPI */
 uint patch_2000[] = {
 	0x7FFFEFD9,
 	0x3FFD0000,
@@ -183,11 +177,12 @@ uint patch_2f00[] = {
 };
 #endif
 
-#ifdef USE_SMC_PATCH
-#define PATCH_DEFINED
-/* SMC2/IIC/SPI Patch */
-/* This is the area from 0x2000 to 0x23ff.
-*/
+/*
+ * I2C/SPI/SMC1 relocation patch arrays.
+ */
+
+#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
+
 uint patch_2000[] = {
 	0x3fff0000,
 	0x3ffd0000,
@@ -511,8 +506,6 @@ uint patch_2000[] = {
 	0x6079e2bb
 };
 
-	/* This is from 0x2f00 to 0x2fff
-	*/
 uint patch_2f00[] = {
 	0x30303030,
 	0x3e3e3434,
@@ -581,8 +574,6 @@ uint patch_2f00[] = {
 };
 
 uint patch_2e00[] = {
-	/* This is from 0x2e00 to 0x2e3c
-	*/
 	0x27eeeeee,
 	0xeeeeeeee,
 	0xeeeeeeee,
@@ -602,8 +593,12 @@ uint patch_2e00[] = {
 };
 #endif
 
-#ifdef USE_USB_SOF_PATCH
-#define PATCH_DEFINED
+/*
+ *  USB SOF patch arrays.
+ */
+
+#ifdef CONFIG_USB_SOF_UCODE_PATCH
+
 uint patch_2000[] = {
 	0x7fff0000,
 	0x7ffd0000,
@@ -626,33 +621,21 @@ uint patch_2f00[] = {
 };
 #endif
 
-/* Load the microcode patch.  This is called early in the CPM initialization
- * with the controller in the reset state.  We enable the processor after
- * we load the patch.
- */
 void
 cpm_load_patch(volatile immap_t *immr)
 {
-#ifdef PATCH_DEFINED
-	volatile uint		*dp;
+	volatile uint		*dp;		/* Dual-ported RAM. */
 	volatile cpm8xx_t	*commproc;
 	volatile iic_t		*iip;
 	volatile spi_t		*spp;
+	volatile smc_uart_t	*smp;
 	int	i;
 
 	commproc = (cpm8xx_t *)&immr->im_cpm;
 
-	/* We work closely with commproc.c.  We know it only allocates
-	 * from data only space.
-	 * For this particular patch, we only use the bottom 512 bytes
-	 * and the upper 256 byte extension.  We will use the space
-	 * starting at 1K for the relocated parameters, as the general
-	 * CPM allocation won't come from that area.
-	 */
+#ifdef CONFIG_USB_SOF_UCODE_PATCH
 	commproc->cp_rccr = 0;
 
-	/* Copy the patch into DPRAM.
-	*/
 	dp = (uint *)(commproc->cp_dpmem);
 	for (i=0; i<(sizeof(patch_2000)/4); i++)
 		*dp++ = patch_2000[i];
@@ -661,29 +644,26 @@ cpm_load_patch(volatile immap_t *immr)
 	for (i=0; i<(sizeof(patch_2f00)/4); i++)
 		*dp++ = patch_2f00[i];
 
-#ifdef USE_USB_SOF_PATCH
-#if 0 /* usb patch should not relocate iic */
-	iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
-#define RPBASE 0x0030
-	iip->iic_rpbase = RPBASE;
+	commproc->cp_rccr = 0x0009;
 
-	/* Put SPI above the IIC, also 32-byte aligned.
-	*/
-	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
-#endif
+	printk("USB SOF microcode patch installed\n");
+#endif /* CONFIG_USB_SOF_UCODE_PATCH */
 
-	/* Enable uCode fetches from DPRAM. */
-	commproc->cp_rccr = 0x0009;
+#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
+    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
+
+	commproc->cp_rccr = 0;
 
-	printk("USB uCode patch installed\n");
-#endif /* USE_USB_SOF_PATCH */
+	dp = (uint *)(commproc->cp_dpmem);
+	for (i=0; i<(sizeof(patch_2000)/4); i++)
+		*dp++ = patch_2000[i];
 
-#if defined(USE_SMC_PATCH) || defined(USE_IIC_PATCH)
+	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
+	for (i=0; i<(sizeof(patch_2f00)/4); i++)
+		*dp++ = patch_2f00[i];
 
 	iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
-#define RPBASE 0x0400
+# define RPBASE 0x0500
 	iip->iic_rpbase = RPBASE;
 
 	/* Put SPI above the IIC, also 32-byte aligned.
@@ -692,58 +672,46 @@ cpm_load_patch(volatile immap_t *immr)
 	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
 	spp->spi_rpbase = i;
 
-#ifdef USE_SMC_PATCH
+# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
+	commproc->cp_cpmcr1 = 0x802a;
+	commproc->cp_cpmcr2 = 0x8028;
+	commproc->cp_cpmcr3 = 0x802e;
+	commproc->cp_cpmcr4 = 0x802c;
+	commproc->cp_rccr = 1;
+
+	printk("I2C/SPI microcode patch installed.\n");
+# endif /* CONFIG_I2C_SPI_UCODE_PATCH */
+
+# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
+
 	dp = (uint *)&(commproc->cp_dpmem[0x0e00]);
 	for (i=0; i<(sizeof(patch_2e00)/4); i++)
 		*dp++ = patch_2e00[i];
 
-	/* Enable the traps to get to it.
-	*/
 	commproc->cp_cpmcr1 = 0x8080;
 	commproc->cp_cpmcr2 = 0x808a;
 	commproc->cp_cpmcr3 = 0x8028;
 	commproc->cp_cpmcr4 = 0x802a;
-
-	/* Enable uCode fetches from DPRAM.
-	*/
 	commproc->cp_rccr = 3;
-#endif
-
-#ifdef USE_IIC_PATCH
-	/* Enable the traps to get to it.
-	*/
-	commproc->cp_cpmcr1 = 0x802a;
-	commproc->cp_cpmcr2 = 0x8028;
-	commproc->cp_cpmcr3 = 0x802e;
-	commproc->cp_cpmcr4 = 0x802c;
 
-	/* Enable uCode fetches from DPRAM.
-	*/
-	commproc->cp_rccr = 1;
+	smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
+	smp->smc_rpbase = 0x1FC0;
 
-	printk("I2C uCode patch installed\n");
-#endif
+	printk("I2C/SPI/SMC1 microcode patch installed.\n");
+# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */
 
-	/* Relocate the IIC and SPI parameter areas.  These have to
-	 * aligned on 32-byte boundaries.
-	 */
-	iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
-	iip->iic_rpbase = RPBASE;
+#endif /* some variation of the I2C/SPI patch was selected */
+}
 
-	/* Put SPI above the IIC, also 32-byte aligned.
+/*
+ *  Take this entire routine out, since no one calls it and its 
+ * logic is suspect.
  */
-	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
-
-#endif /* USE_SMC_PATCH || USE_IIC_PATCH */
-#endif /* PATCH_DEFINED */
-}
 
+#if 0
 void
 verify_patch(volatile immap_t *immr)
 {
-#ifdef PATCH_DEFINED
 	volatile uint		*dp;
 	volatile cpm8xx_t	*commproc;
 	int i;
@@ -772,6 +740,5 @@ verify_patch(volatile immap_t *immr)
 		}
 
 	commproc->cp_rccr = 0x0009;
-#endif /* PATCH_DEFINED */
 }
-
+#endif

arch/ppc/Kconfig

@@ -74,6 +74,7 @@ config POWER4
 	bool "POWER4 and 970 (G5)"
 
 config 8xx
+	depends on BROKEN
 	bool "8xx"
 
 config E500
@@ -756,11 +757,6 @@ config PC_KEYBOARD
 	bool "PC PS/2 style Keyboard"
 	depends on 4xx || CPM2
 
-config SERIAL_CONSOLE
-	bool
-	depends on 8xx
-	default y
-
 config SERIAL_CONSOLE_BAUD
 	int
 	depends on EV64260

arch/ppc/boot/lib/Makefile

@@ -2,9 +2,22 @@
 # Makefile for some libs needed by zImage.
 #
 
-CFLAGS_kbd.o	+= -Idrivers/char
+CFLAGS_kbd.o	:= -Idrivers/char
+CFLAGS_vreset.o := -I$(srctree)/arch/ppc/boot/include
 
-lib-y := $(addprefix ../../../../lib/zlib_inflate/, \
-           infblock.o infcodes.o inffast.o inflate.o inftrees.o infutil.o)
-lib-y += div64.o
+zlib  := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c
+	 
+lib-y += $(zlib:.c=.o) div64.o
 lib-$(CONFIG_VGA_CONSOLE) += vreset.o kbd.o
+
+
+# zlib files needs header from their original place
+EXTRA_CFLAGS += -Ilib/zlib_inflate
+
+quiet_cmd_copy_zlib = COPY    $@
+      cmd_copy_zlib = cat $< > $@
+
+$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+	$(call cmd,copy_zlib)
+
+clean-files := $(zlib)

arch/ppc/configs/FADS_defconfig

@@ -295,25 +295,27 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+# CONFIG_SERIAL_CPM_ALT_SMC2 is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -478,10 +480,6 @@ CONFIG_SCC1_ENET=y
 # CONFIG_SCC3_ENET is not set
 # CONFIG_FEC_ENET is not set
 CONFIG_ENET_BIG_BUFFERS=y
-CONFIG_SMC2_UART=y
-# CONFIG_ALTSMC2 is not set
-# CONFIG_CONS_SMC2 is not set
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/IVMS8_defconfig

@@ -319,25 +319,26 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+# CONFIG_SERIAL_CPM_SMC2 is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -507,8 +508,6 @@ CONFIG_FEC_LXT970=y
 CONFIG_FEC_LXT971=y
 CONFIG_FEC_QS6612=y
 CONFIG_ENET_BIG_BUFFERS=y
-# CONFIG_SMC2_UART is not set
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/SM850_defconfig

@@ -92,7 +92,8 @@ CONFIG_KERNEL_ELF=y
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyCPM1"
 
 #
 # Advanced setup
@@ -296,25 +297,27 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_SERIAL_CPM_ALT_SMC2=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -479,10 +482,6 @@ CONFIG_SCC_ENET=y
 CONFIG_SCC3_ENET=y
 # CONFIG_FEC_ENET is not set
 CONFIG_ENET_BIG_BUFFERS=y
-CONFIG_SMC2_UART=y
-CONFIG_ALTSMC2=y
-CONFIG_CONS_SMC2=y
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/SPD823TS_defconfig

@@ -295,25 +295,27 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_SERIAL_CPM_ALT_SMC2=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -478,10 +480,6 @@ CONFIG_SCC2_ENET=y
 # CONFIG_SCC3_ENET is not set
 # CONFIG_FEC_ENET is not set
 CONFIG_ENET_BIG_BUFFERS=y
-CONFIG_SMC2_UART=y
-CONFIG_ALTSMC2=y
-# CONFIG_CONS_SMC2 is not set
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/TQM823L_defconfig

@@ -296,25 +296,27 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_SERIAL_CPM_ALT_SMC2=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -479,10 +481,6 @@ CONFIG_SCC2_ENET=y
 # CONFIG_SCC3_ENET is not set
 # CONFIG_FEC_ENET is not set
 CONFIG_ENET_BIG_BUFFERS=y
-CONFIG_SMC2_UART=y
-CONFIG_ALTSMC2=y
-# CONFIG_CONS_SMC2 is not set
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/TQM850L_defconfig

@@ -296,25 +296,27 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_SERIAL_CPM_ALT_SMC2=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -479,10 +481,6 @@ CONFIG_SCC2_ENET=y
 # CONFIG_SCC3_ENET is not set
 # CONFIG_FEC_ENET is not set
 CONFIG_ENET_BIG_BUFFERS=y
-CONFIG_SMC2_UART=y
-CONFIG_ALTSMC2=y
-# CONFIG_CONS_SMC2 is not set
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/TQM860L_defconfig

@@ -320,25 +320,26 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -508,10 +509,6 @@ CONFIG_SCC1_ENET=y
 # CONFIG_SCC3_ENET is not set
 # CONFIG_FEC_ENET is not set
 CONFIG_ENET_BIG_BUFFERS=y
-CONFIG_SMC2_UART=y
-# CONFIG_ALTSMC2 is not set
-# CONFIG_CONS_SMC2 is not set
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/bseip_defconfig

@@ -292,25 +292,26 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -476,10 +477,6 @@ CONFIG_SCC2_ENET=y
 # CONFIG_SCC3_ENET is not set
 # CONFIG_FEC_ENET is not set
 # CONFIG_ENET_BIG_BUFFERS is not set
-CONFIG_SMC2_UART=y
-# CONFIG_ALTSMC2 is not set
-# CONFIG_CONS_SMC2 is not set
-# CONFIG_USE_SCC_IO is not set
 
 #
 # Generic MPC8xx Options

arch/ppc/configs/mbx_defconfig

@@ -289,24 +289,26 @@ CONFIG_SOUND_GAMEPORT=y
 # Macintosh device drivers
 #
 
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_CPM_SCC1 is not set
+CONFIG_SERIAL_CPM_SCC2=y
+CONFIG_SERIAL_CPM_SCC3=y
+# CONFIG_SERIAL_CPM_SCC4 is not set
+CONFIG_SERIAL_CPM_SMC1=y
+CONFIG_SERIAL_CPM_SMC2=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # I2C support
@@ -470,10 +472,6 @@ CONFIG_SCC1_ENET=y
 # CONFIG_SCC3_ENET is not set
 # CONFIG_FEC_ENET is not set
 CONFIG_ENET_BIG_BUFFERS=y
-CONFIG_SMC2_UART=y
-# CONFIG_ALTSMC2 is not set
-# CONFIG_CONS_SMC2 is not set
-CONFIG_USE_SCC_IO=y
 
 #
 # Generic MPC8xx Options

arch/ppc/kernel/Makefile

@@ -25,7 +25,7 @@ obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
 obj-$(CONFIG_TAU)		+= temp.o
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 
-ifdef CONFIG_MATH_EMULATION
+ifndef CONFIG_MATH_EMULATION
 obj-$(CONFIG_8xx)		+= softemu8xx.o
 endif
 

arch/ppc/kernel/ppc_ksyms.c

@@ -321,9 +321,6 @@ EXPORT_SYMBOL(cpm_free_handler);
 #if defined(CONFIG_8xx) || defined(CONFIG_40x) || defined(CONFIG_85xx)
 EXPORT_SYMBOL(__res);
 #endif
-#if defined(CONFIG_8xx)
-EXPORT_SYMBOL(request_8xxirq);
-#endif
 
 EXPORT_SYMBOL(next_mmu_context);
 EXPORT_SYMBOL(set_context);

arch/ppc/kernel/softemu8xx.c

@@ -133,7 +133,7 @@ Soft_emulate_8xx(struct pt_regs *regs)
 			print_8xx_pte(current->mm,regs->nip);
 			pa = get_8xx_pte(current->mm,regs->nip) & PAGE_MASK;
 			pa |= (regs->nip & ~PAGE_MASK);
-			pa = __va(pa);
+			pa = (unsigned long)__va(pa);
 			printk("Kernel VA for NIP %x ", pa);
 			print_8xx_pte(current->mm,pa);
 		}

arch/ppc/platforms/rpxclassic.h

@@ -82,7 +82,6 @@ extern bd_t m8xx_board_info;
 /* for pcmcia sandisk */
 #ifdef CONFIG_IDE
 # define MAX_HWIFS 1
-# define request_irq(irq,hand,flg,dev,id)    request_8xxirq((irq),(hand),(flg),(dev),(id))
 #endif
 #endif
 

arch/ppc/platforms/rpxlite.h

@@ -68,7 +68,6 @@ extern bd_t m8xx_board_info;
 
 #ifdef CONFIG_IDE
 # define MAX_HWIFS 1
-# define request_irq(irq,hand,flg,dev,id)    request_8xxirq((irq),(hand),(flg),(dev),(id))
 #endif
 
 /* CPM Ethernet through SCCx.

arch/ppc/platforms/tqm8xx.h

@@ -72,8 +72,6 @@ static __inline__ void ide_led(int on)
 #define	IDE0_INTERRUPT		13
 
 #ifdef CONFIG_IDE
-#define ide_request_irq(irq,hand,flg,dev,id)    \
-        request_8xxirq((irq),(hand),(flg),(dev),(id))
 #endif
 
 /*-----------------------------------------------------------------------

arch/ppc64/boot/Makefile

@@ -118,6 +118,6 @@ $(obj)/imagesize.c: vmlinux.strip
 		>> $(obj)/imagesize.c
 
 install: $(CONFIGURE) $(obj)/$(BOOTIMAGE)
-	sh -x $(src)/install.sh "$(KERNELRELEASE)" "$(obj)/$(BOOTIMAGE)" "$(INSTALL_PATH)"
+	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" "$(obj)/$(BOOTIMAGE)" "$(INSTALL_PATH)"
 
 clean-files := $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip)

arch/sparc/Kconfig

@@ -86,8 +86,8 @@ config SMP
 	depends on BROKEN
 	---help---
 	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, like most personal computers, say N. If
-	  you have a system with more than one CPU, say Y.
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.
 
 	  If you say N here, the kernel will run on single and multiprocessor
 	  machines, but will use only one CPU of a multiprocessor machine. If
@@ -95,17 +95,11 @@ config SMP
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  Note that if you say Y here and choose architecture "586" or
-	  "Pentium" under "Processor family", the kernel will not work on 486
-	  architectures. Similarly, multiprocessor kernels for the "PPro"
-	  architecture may not work on all Pentium based boards.
-
 	  People using multiprocessor machines who say Y here should also say
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.
 
 	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/i386/IO-APIC.txt>,
 	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.
 
@@ -189,10 +183,10 @@ config SERIAL_CONSOLE
 	  (/dev/tty0) will still be used as the system console by default, but
 	  you can alter that using a kernel command line option such as
 	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (lilo or loadlin) about how to pass options to the
-	  kernel at boot time.)
+	  your boot loader (silo) about how to pass options to the kernel at
+	  boot time.)
 
-	  If you don't have a VGA card installed and you say Y here, the
+	  If you don't have a graphics card installed and you say Y here, the
 	  kernel will automatically use the first serial line, /dev/ttyS0, as
 	  system console.
 
@@ -223,6 +217,7 @@ config SUN_PM
 config SUN4
 	bool "Support for SUN4 machines (disables SUN4[CDM] support)"
 	depends on !SMP
+	default n
 	help
 	  Say Y here if, and only if, your machine is a sun4. Note that
 	  a kernel compiled with this option will run only on sun4.
@@ -249,7 +244,10 @@ config SUN_OPENPROMFS
 	  -t openpromfs none /proc/openprom".
 
 	  To compile the /proc/openprom support as a module, choose M here: the
-	  module will be called openpromfs.  If unsure, choose M.
+	  module will be called openpromfs.
+
+	  Only choose N if you know in advance that you will not need to modify
+	  OpenPROM settings on the running system.
 
 source "fs/Kconfig.binfmt"
 
@@ -282,9 +280,9 @@ config PRINTER
 
 	  If you have several parallel ports, you can specify which ports to
 	  use with the "lp" kernel command line option.  (Try "man bootparam"
-	  or see the documentation of your boot loader (lilo or loadlin) about
-	  how to pass options to the kernel at boot time.)  The syntax of the
-	  "lp" command line option can be found in <file:drivers/char/lp.c>.
+	  or see the documentation of your boot loader (silo) about how to pass
+	  options to the kernel at boot time.)  The syntax of the "lp" command
+	  line option can be found in <file:drivers/char/lp.c>.
 
 	  If you have more than 8 printers, you need to increase the LP_NO
 	  macro in lp.c and the PARPORT_MAX macro in parport.h.

drivers/md/dm-io.c

@@ -267,7 +267,7 @@ static int resize_pool(unsigned int new_ios)
 		/* create new pool */
 		_io_pool = mempool_create(new_ios, alloc_io, free_io, NULL);
 		if (!_io_pool)
-			r = -ENOMEM;
+			return -ENOMEM;
 
 		r = bio_set_init(&_bios, "dm-io", 512, 1);
 		if (r) {

drivers/serial/cpm_uart/cpm_uart.h

@@ -70,6 +70,8 @@ struct uart_cpm_port {
 	/* helpers */
 	int			 baud;
 	int			 bits;
+	/* Keep track of 'odd' SMC2 wirings */
+	int			is_portb;
 };
 
 extern int cpm_uart_port_map[UART_NR];

include/asm-ppc/mpc8xx.h

@@ -96,11 +96,7 @@
 extern unsigned char __res[];
 
 struct pt_regs;
-extern int request_8xxirq(unsigned int irq,
-		       void (*handler)(int, void *, struct pt_regs *),
-		       unsigned long flags,
-		       const char *device,
-		       void *dev_id);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* CONFIG_8xx */
 #endif /* __CONFIG_8xx_DEFS */