Merge tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Paul Burton:
 "A few MIPS fixes for 5.3:

   - Various switch fall through annotations to fixup warnings & errors
     resulting from -Wimplicit-fallthrough.

   - A fix for systems (at least jazz) using an i8253 PIT as clocksource
     when it's not suitably configured.

   - Set struct cacheinfo's cpu_map_populated field to true, indicating
     that we filled in cache info detected from cop0 registers &
     avoiding complaints about that info being (intentionally) missing
     in devicetree"

* tag 'mips_fixes_5.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: BCM63XX: Mark expected switch fall-through
  MIPS: OProfile: Mark expected switch fall-throughs
  MIPS: Annotate fall-through in Cavium Octeon code
  MIPS: Annotate fall-through in kvm/emulate.c
  mips: fix cacheinfo
  MIPS: kernel: only use i8253 clocksource with periodic clockevent

arch/mips/cavium-octeon/octeon-usb.c

@@ -398,6 +398,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
 	default:
 		dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
 			clock_rate);
+		/* fall through */
 	case 100000000:
 		mpll_mul = 0x19;
 		if (ref_clk_sel < 2)

arch/mips/kernel/cacheinfo.c

@@ -69,6 +69,8 @@ static int __populate_cache_leaves(unsigned int cpu)
 	if (c->tcache.waysize)
 		populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED);
 
+	this_cpu_ci->cpu_map_populated = true;
+
 	return 0;
 }
 

arch/mips/kernel/i8253.c

@@ -32,7 +32,8 @@ void __init setup_pit_timer(void)
 
 static int __init init_pit_clocksource(void)
 {
-	if (num_possible_cpus() > 1) /* PIT does not scale! */
+	if (num_possible_cpus() > 1 || /* PIT does not scale! */
+	    !clockevent_state_periodic(&i8253_clockevent))
 		return 0;
 
 	return clocksource_i8253_init();

arch/mips/kvm/emulate.c

@@ -140,6 +140,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc,
 		/* These are unconditional and in j_format. */
 	case jal_op:
 		arch->gprs[31] = instpc + 8;
+		/* fall through */
 	case j_op:
 		epc += 4;
 		epc >>= 28;

arch/mips/oprofile/op_model_mipsxx.c

@@ -172,12 +172,15 @@ static void mipsxx_cpu_setup(void *args)
 	case 4:
 		w_c0_perfctrl3(0);
 		w_c0_perfcntr3(reg.counter[3]);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(0);
 		w_c0_perfcntr2(reg.counter[2]);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(0);
 		w_c0_perfcntr1(reg.counter[1]);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(0);
 		w_c0_perfcntr0(reg.counter[0]);
@@ -195,10 +198,13 @@ static void mipsxx_cpu_start(void *args)
 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(WHAT | reg.control[3]);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(WHAT | reg.control[2]);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(WHAT | reg.control[1]);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(WHAT | reg.control[0]);
 	}
@@ -215,10 +221,13 @@ static void mipsxx_cpu_stop(void *args)
 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(0);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(0);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(0);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(0);
 	}
@@ -236,6 +245,7 @@ static int mipsxx_perfcount_handler(void)
 
 	switch (counters) {
 #define HANDLE_COUNTER(n)						\
+	/* fall through */						\
 	case n + 1:							\
 		control = r_c0_perfctrl ## n();				\
 		counter = r_c0_perfcntr ## n();				\
@@ -297,12 +307,15 @@ static void reset_counters(void *arg)
 	case 4:
 		w_c0_perfctrl3(0);
 		w_c0_perfcntr3(0);
+		/* fall through */
 	case 3:
 		w_c0_perfctrl2(0);
 		w_c0_perfcntr2(0);
+		/* fall through */
 	case 2:
 		w_c0_perfctrl1(0);
 		w_c0_perfcntr1(0);
+		/* fall through */
 	case 1:
 		w_c0_perfctrl0(0);
 		w_c0_perfcntr0(0);

arch/mips/pci/ops-bcm63xx.c

@@ -474,6 +474,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
 		if (PCI_SLOT(devfn) == 0)
 			return bcm_pcie_readl(PCIE_DLSTATUS_REG)
 					& DLSTATUS_PHYLINKUP;
+		/* else, fall through */
 	default:
 		return false;
 	}