Skip to content

L
linux
Commit 77215b89 authored by Rusty Russell's avatar Rusty Russell Committed by Linus Torvalds
Browse files
Options

[PATCH] Kconfig fixes for modules.txt 

Kconfig cleanup megapatch from Nicolas Kaiser <nikai@nikai.net>.

modules.txt no longer exists, and the common wording used to refer to
it sucks.  This is all by Nicolas Kaiser's: at Randy and Matthew's
request, "say M" changed to "choose M" (more sense for graphical front
ends, too).
parent 7bc26fad
Hide whitespace changes
Inline Side-by-side
Showing with 1537 additions and 2905 deletions
arch/arm/Kconfig
View file @ 77215b89
......@@ -723,10 +723,8 @@ config APM
11) exchange RAM chips
12) exchange the motherboard.
To compile this driver as a module ( = code which can be inserted in
and removed from the running kernel whenever you want), say M here
and read <file:Documentation/modules.txt>. The module will be called
apm.
To compile this driver as a module, choose M here: the
module will be called apm.
config ARTHUR
tristate "RISC OS personality"
......
arch/arm/mach-integrator/Kconfig
View file @ 77215b89
......@@ -8,9 +8,7 @@ config INTEGRATOR_IMPD1
allows ARM(R) Ltd PrimeCells to be developed and evaluated.
The IM-PD1 can be found on the Integrator/PP2 platform.
If you want to compile this as a module (=code which can be
inserted into and removed from the running kernel), say M
here and read <file:Documentation/modules.txt>. The module
will be called impd1.
To compile this driver as a module, choose M here: the
module will be called impd1.
endmenu
arch/i386/Kconfig
View file @ 77215b89
......@@ -606,11 +606,9 @@ config MICROCODE
ingredients for this driver, check:
<http://www.urbanmyth.org/microcode/>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called microcode. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>. If
you use modprobe or kmod you may also want to add the line
To compile this driver as a module, choose M here: the
module will be called microcode.
If you use modprobe or kmod you may also want to add the line
'alias char-major-10-184 microcode' to your /etc/modules.conf file.
config X86_MSR
......@@ -920,10 +918,8 @@ config APM
11) exchange RAM chips
12) exchange the motherboard.
To compile this driver as a module ( = code which can be inserted in
and removed from the running kernel whenever you want), say M here
and read <file:Documentation/modules.txt>. The module will be called
apm.
To compile this driver as a module, choose M here: the
module will be called apm.
config APM_IGNORE_USER_SUSPEND
bool "Ignore USER SUSPEND"
......
arch/m68k/Kconfig
View file @ 77215b89
......@@ -67,11 +67,8 @@ config PCMCIA
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
When compiled this way, there will be modules called pcmcia_core
and ds. If you want to compile it as a module, say M here and
read <file:Documentation/modules.txt>.
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
config AMIGA
bool "Amiga support"
......@@ -425,13 +422,11 @@ config PARPORT
It is possible to share a single parallel port among several devices
and it is safe to compile all the corresponding drivers into the
kernel. If you want to compile parallel port support as a module
( = code which can be inserted in and removed from the running
kernel whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called
parport. If you have more than one parallel port and want to
specify which port and IRQ to be used by this driver at module load
time, take a look at <file:Documentation/parport.txt>.
kernel. To compile parallel port support as a module, choose M here:
the module will be called parport.
If you have more than one parallel port and want to specify which
port and IRQ to be used by this driver at module load time, take a
look at <file:Documentation/parport.txt>.
If unsure, say Y.
......@@ -460,11 +455,8 @@ config PARPORT_PC
PC compatible computers and some Alphas have PC-style parallel
ports.
This code is also available as a module. If you want to compile it
as a module ( = code which can be inserted in and removed from the
running kernel whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called
parport_pc.
To compile this driver as a module, choose M here: the
module will be called parport_pc.
If unsure, say Y.
......@@ -488,10 +480,8 @@ config PRINTER
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
corresponding drivers into the kernel. If you want to compile this
driver as a module however ( = code which can be inserted in and
removed from the running kernel whenever you want), say M here and
read <file:Documentation/modules.txt> and
corresponding drivers into the kernel.
To compile this driver as a module, choose M here and read
<file:Documentation/parport.txt>. The module will be called lp.
If you have several parallel ports, you can specify which ports to
......@@ -571,9 +561,8 @@ config SERIAL
serial port drivers do not need this driver built in for them to
work.)
If you want to compile this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
serial.
To compile this driver as a module, choose M here: the
module will be called serial.
[WARNING: Do not compile this driver as a module if you are using
non-standard serial ports, since the configuration information will
be lost when the driver is unloaded. This limitation may be lifted
......@@ -717,10 +706,8 @@ config NVRAM
On Atari machines, /dev/nvram is always configured and does not need
to be selected.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called nvram. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called nvram.
config ATARI_MFPSER
tristate "Atari MFP serial support"
......@@ -730,10 +717,7 @@ config ATARI_MFPSER
Linux, say Y. The driver equally supports all kinds of MFP serial
ports and automatically detects whether Serial1 is available.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
Note for Falcon users: You also have an MFP port, it's just not
wired to the outside... But you could use the port under Linux.
......@@ -748,10 +732,7 @@ config ATARI_SCC
two connectors for channel A (Serial2 and LAN), they are visible as
two separate devices.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config ATARI_SCC_DMA
bool "Atari SCC serial DMA support"
......@@ -769,10 +750,7 @@ config ATARI_MIDI
help
If you want to use your Atari's MIDI port in Linux, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config ATARI_DSP56K
tristate "Atari DSP56k support (EXPERIMENTAL)"
......@@ -782,10 +760,7 @@ config ATARI_DSP56K
driver is still experimental, and if you don't know what it is, or
if you don't have this processor, just say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config AMIGA_BUILTIN_SERIAL
tristate "Amiga builtin serial support"
......@@ -794,10 +769,7 @@ config AMIGA_BUILTIN_SERIAL
If you want to use your Amiga's built-in serial port in Linux,
answer Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config WHIPPET_SERIAL
tristate "Hisoft Whippet PCMCIA serial support"
......@@ -813,10 +785,7 @@ config MULTIFACE_III_TTY
If you want to use a Multiface III card's serial port in Linux,
answer Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
......@@ -832,8 +801,7 @@ config A2232
This driver can be built as a module; but then "generic_serial"
will also be built as a module. This has to be loaded before
"ser_a2232". If you want to do this, answer M here and read
"<file:Documentation/modules.txt>".
"ser_a2232". If you want to do this, answer M here.
config GVPIOEXT
tristate "GVP IO-Extender support"
......@@ -1086,11 +1054,8 @@ config SOFT_WATCHDOG
from some situations that the hardware watchdog will recover
from. Equally it's a lot cheaper to install.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
softdog.
To compile this driver as a module, choose M here: the
module will be called softdog.
config GEN_RTC
tristate "Generic /dev/rtc emulation" if !SUN3
......@@ -1107,12 +1072,9 @@ config GEN_RTC
for RTC_UIE which is required by some programs and may improve
precision in some cases.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called genrtc. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. To load the
module automatically add 'alias char-major-10-135 genrtc' to your
/etc/modules.conf
To compile this driver as a module, choose M here: the
module will be called genrtc. To load the module automatically
add 'alias char-major-10-135 genrtc' to your /etc/modules.conf
config GEN_RTC_X
bool "Extended RTC operation"
......
arch/mips/Kconfig
View file @ 77215b89
......@@ -1272,12 +1272,10 @@ config SOUND
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.
compile the sound card support as a module and load that module
after the PnP configuration is finished. To do this, choose M here
and read <file:Documentation/sound/README.modules>; the module
will be called soundcore.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
......
arch/ppc/Kconfig
View file @ 77215b89
......@@ -969,10 +969,7 @@ config AMIGA_BUILTIN_SERIAL
If you want to use your Amiga's built-in serial port in Linux,
answer Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config GVPIOEXT
tristate "GVP IO-Extender support"
......@@ -1002,10 +999,7 @@ config MULTIFACE_III_TTY
If you want to use a Multiface III card's serial port in Linux,
answer Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
......@@ -1021,8 +1015,7 @@ config A2232
This driver can be built as a module; but then "generic_serial"
will also be built as a module. This has to be loaded before
"ser_a2232". If you want to do this, answer M here and read
"<file:Documentation/modules.txt>".
"ser_a2232". If you want to do this, answer M here.
config WHIPPET_SERIAL
tristate "Hisoft Whippet PCMCIA serial support"
......@@ -1038,10 +1031,8 @@ config APNE
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called apne. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called apne.
config SERIAL_CONSOLE
bool "Support for serial port console"
......
arch/s390/Kconfig
View file @ 77215b89
......@@ -166,10 +166,8 @@ config QDIO
For details please refer to the documentation provided by IBM at
<http://www10.software.ibm.com/developerworks/opensource/linux390>
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called qdio. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called qdio.
If unsure, say Y.
......
arch/sh/Kconfig
View file @ 77215b89
......@@ -839,9 +839,8 @@ config SERIAL
serial port drivers do not need this driver built in for them to
work.)
If you want to compile this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
serial.
To compile this driver as a module, choose M here: the
module will be called serial.
[WARNING: Do not compile this driver as a module if you are using
non-standard serial ports, since the configuration information will
be lost when the driver is unloaded. This limitation may be lifted
......@@ -973,10 +972,8 @@ config PRINTER
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
corresponding drivers into the kernel. If you want to compile this
driver as a module however ( = code which can be inserted in and
removed from the running kernel whenever you want), say M here and
read <file:Documentation/modules.txt> and
corresponding drivers into the kernel.
To compile this driver as a module, choose M here and read
<file:Documentation/parport.txt>. The module will be called lp.
If you have several parallel ports, you can specify which ports to
......@@ -1018,10 +1015,8 @@ config PPDEV
It is safe to say N to this -- it is not needed for normal printing
or parallel port CD-ROM/disk support.
This support is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
ppdev.
To compile this support as a module, choose M here: the
module will be called ppdev.
If unsure, say N.
......@@ -1097,10 +1092,8 @@ config SH_WDT
some performance issues. As such, the WDT should be avoided here
unless it is absolutely necessary.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called shwdt. If you want to compile it as a module,
say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called shwdt.
endmenu
......@@ -1126,10 +1119,8 @@ config RTC
sampling), then say Y here, and read <file:Documentation/rtc.txt>
for details.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called rtc. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rtc.
source "drivers/char/pcmcia/Kconfig"
......
arch/sparc/Kconfig
View file @ 77215b89
......@@ -162,11 +162,8 @@ config PCMCIA
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
When compiled this way, there will be modules called pcmcia_core
and ds. If you want to compile it as a module, say M here and
read <file:Documentation/modules.txt>.
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
config SBUS
bool
......@@ -248,11 +245,8 @@ config SUN_OPENPROMFS
virtual file system, which you can mount to /proc/openprom by "mount
-t openpromfs none /proc/openprom".
If you want to compile the /proc/openprom support as a module ( =
code which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>.
The module will be called openpromfs. If unsure, say M.
To compile the /proc/openprom support as a module, choose M here: the
module will be called openpromfs. If unsure, choose M.
source "fs/Kconfig.binfmt"
......@@ -280,9 +274,7 @@ config PRINTER
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
corresponding drivers into the kernel. If you want to compile this
driver as a module however ( = code which can be inserted in and
removed from the running kernel whenever you want), say M here and
read <file:Documentation/modules.txt> and
driver as a module however, choose M here and read
<file:Documentation/parport.txt>. The module will be called lp.
If you have several parallel ports, you can specify which ports to
......@@ -321,10 +313,8 @@ config BLK_DEV_FD
well as location of the fdutils package used to configure additional
parameters of the driver at run time.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called floppy. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called floppy.
config BLK_DEV_LOOP
tristate "Loopback device support"
......@@ -370,10 +360,8 @@ config BLK_DEV_LOOP
Note that this loop device has nothing to do with the loopback
device used for network connections from the machine to itself.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called loop.
To compile this driver as a module, choose M here: the
module will be called loop.
Most users will answer N here.
......@@ -399,10 +387,8 @@ config BLK_DEV_NBD
Note that this has nothing to do with the network file systems NFS
or Coda; you can say N here even if you intend to use NFS or Coda.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called nbd.
To compile this driver as a module, choose M here: the
module will be called nbd.
If unsure, say N.
......@@ -421,10 +407,8 @@ config BLK_DEV_RAM
Note that the kernel command line option "ramdisk=XX" is now
obsolete. For details, read <file:Documentation/ramdisk.txt>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M and read <file:Documentation/modules.txt>. The module will be
called rd.
To compile this driver as a module, choose M here: the
module will be called rd.
Most normal users won't need the RAM disk functionality, and can
thus say N here.
......@@ -534,11 +518,8 @@ config SOFT_WATCHDOG
from some situations that the hardware watchdog will recover
from. Equally it's a lot cheaper to install.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
softdog.
To compile this driver as a module, choose M here: the
module will be called softdog.
endmenu
......
arch/sparc64/Kconfig
View file @ 77215b89
......@@ -238,10 +238,8 @@ config ISAPNP
Say Y here if you would like support for ISA Plug and Play devices.
Some information is in <file:Documentation/isapnp.txt>.
This support is also available as a module called isapnp ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called isapnp.
If unsure, say Y.
......@@ -283,11 +281,8 @@ config PCMCIA
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
When compiled this way, there will be modules called pcmcia_core
and ds. If you want to compile it as a module, say M here and
read <file:Documentation/modules.txt>.
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
config SBUS
bool
......@@ -346,10 +341,8 @@ config RTC
sampling), then say Y here, and read <file:Documentation/rtc.txt>
for details.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called rtc. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rtc.
source "drivers/pci/Kconfig"
......@@ -360,11 +353,8 @@ config SUN_OPENPROMFS
virtual file system, which you can mount to /proc/openprom by "mount
-t openpromfs none /proc/openprom".
If you want to compile the /proc/openprom support as a module ( =
code which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>.
The module will be called openpromfs. If unsure, say M.
To compile the /proc/openprom support as a module, choose M here: the
module will be called openpromfs. If unsure, choose M.
config SPARC32_COMPAT
bool "Kernel support for Linux/Sparc 32bit binary compatibility"
......@@ -410,10 +400,8 @@ config SOLARIS_EMUL
This is experimental code which will enable you to run (many)
Solaris binaries on your SPARC Linux machine.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called solaris. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called solaris.
source "drivers/parport/Kconfig"
......@@ -429,10 +417,8 @@ config PRINTER
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
corresponding drivers into the kernel. If you want to compile this
driver as a module however ( = code which can be inserted in and
removed from the running kernel whenever you want), say M here and
read <file:Documentation/modules.txt> and
corresponding drivers into the kernel.
To compile this driver as a module, choose M here and read
<file:Documentation/parport.txt>. The module will be called lp.
If you have several parallel ports, you can specify which ports to
......@@ -451,10 +437,8 @@ config ENVCTRL
Kernel support for temperature and fan monitoring on Sun SME
machines.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called envctrl. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called envctrl.
config DISPLAY7SEG
tristate "7-Segment Display support"
......@@ -463,10 +447,8 @@ config DISPLAY7SEG
This is the driver for the 7-segment display and LED present on
Sun Microsystems CompactPCI models CP1400 and CP1500.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called display7seg. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called display7seg.
If you do not have a CompactPCI model CP1400 or CP1500, or
another UltraSPARC-IIi-cEngine boardset with a 7-segment display,
......@@ -479,10 +461,8 @@ config WATCHDOG_CP1XXX
This is the driver for the hardware watchdog timers present on
Sun Microsystems CompactPCI models CP1400 and CP1500.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cpwatchdog. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cpwatchdog.
If you do not have a CompactPCI model CP1400 or CP1500, or
another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
......@@ -521,10 +501,8 @@ config BLK_DEV_FD
well as location of the fdutils package used to configure additional
parameters of the driver at run time.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called floppy. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called floppy.
config BLK_DEV_LOOP
tristate "Loopback device support"
......@@ -570,10 +548,8 @@ config BLK_DEV_LOOP
Note that this loop device has nothing to do with the loopback
device used for network connections from the machine to itself.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called loop.
To compile this driver as a module, choose M here: the
module will be called loop.
Most users will answer N here.
......@@ -599,10 +575,8 @@ config BLK_DEV_NBD
Note that this has nothing to do with the network file systems NFS
or Coda; you can say N here even if you intend to use NFS or Coda.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called nbd.
To compile this driver as a module, choose M here: the
module will be called nbd.
If unsure, say N.
......@@ -621,10 +595,8 @@ config BLK_DEV_RAM
Note that the kernel command line option "ramdisk=XX" is now
obsolete. For details, read <file:Documentation/ramdisk.txt>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M and read <file:Documentation/modules.txt>. The module will be
called rd.
To compile this driver as a module, choose M here: the
module will be called rd.
Most normal users won't need the RAM disk functionality, and can
thus say N here.
......@@ -783,11 +755,8 @@ config SOFT_WATCHDOG
from some situations that the hardware watchdog will recover
from. Equally it's a lot cheaper to install.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
softdog.
To compile this driver as a module, choose M here: the
module will be called softdog.
endmenu
......
drivers/block/Kconfig
View file @ 77215b89
......@@ -15,10 +15,8 @@ config BLK_DEV_FD
well as location of the fdutils package used to configure additional
parameters of the driver at run time.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called floppy. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called floppy.
config AMIGA_FLOPPY
tristate "Amiga floppy support"
......@@ -49,10 +47,8 @@ config BLK_DEV_PS2
Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
hard disk.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ps2esdi.
To compile this driver as a module, choose M here: the
module will be called ps2esdi.
config AMIGA_Z2RAM
tristate "Amiga Zorro II ramdisk support"
......@@ -60,11 +56,10 @@ config AMIGA_Z2RAM
help
This enables support for using Chip RAM and Zorro II RAM as a
ramdisk or as a swap partition. Say Y if you want to include this
driver in the kernel. This driver is also available as a module
( = code which can be inserted in and removed from the running
kernel whenever you want). The module is called z2ram. If you want
to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
driver in the kernel.
To compile this driver as a module, choose M here: the
module will be called z2ram.
config ATARI_ACSI
tristate "Atari ACSI support"
......@@ -80,9 +75,8 @@ config ATARI_ACSI
Ethernet, and PAMsNet Ethernet. If you want to use one of these
devices, you need ACSI support, too.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called acsi.
To compile this driver as a module, choose M here: the
module will be called acsi.
comment "Some devices (e.g. CD jukebox) support multiple LUNs"
depends on ATARI && ATARI_ACSI
......@@ -116,10 +110,8 @@ config BLK_DEV_XD
Very old 8 bit hard disk controllers used in the IBM XT computer
will be supported if you say Y here.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called xd.
To compile this driver as a module, choose M here: the
module will be called xd.
It's pretty unlikely that you have one of these: say N.
......@@ -195,10 +187,8 @@ config BLK_DEV_DAC960
<file:Documentation/README.DAC960> for further information about
this driver.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called DAC960.
To compile this driver as a module, choose M here: the
module will be called DAC960.
config BLK_DEV_UMEM
tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)"
......@@ -211,10 +201,8 @@ config BLK_DEV_UMEM
The cards appear as block devices that can be partitioned into
as many as 15 partitions.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read Documentation/modules.txt. The module will be
called umem.
To compile this driver as a module, choose M here: the
module will be called umem.
The umem driver has not yet been allocated a MAJOR number, so
one is chosen dynamically. Use "devfs" or look in /proc/devices
......@@ -255,10 +243,8 @@ config BLK_DEV_LOOP
Note that this loop device has nothing to do with the loopback
device used for network connections from the machine to itself.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called loop.
To compile this driver as a module, choose M here: the
module will be called loop.
Most users will answer N here.
......@@ -293,10 +279,8 @@ config BLK_DEV_NBD
Note that this has nothing to do with the network file systems NFS
or Coda; you can say N here even if you intend to use NFS or Coda.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called nbd.
To compile this driver as a module, choose M here: the
module will be called nbd.
If unsure, say N.
......@@ -313,10 +297,8 @@ config BLK_DEV_RAM
Note that the kernel command line option "ramdisk=XX" is now
obsolete. For details, read <file:Documentation/ramdisk.txt>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M and read <file:Documentation/modules.txt>. The module will be
called rd.
To compile this driver as a module, choose M here: the
module will be called rd.
Most normal users won't need the RAM disk functionality, and can
thus say N here.
......
drivers/cdrom/Kconfig
View file @ 77215b89
......@@ -24,10 +24,7 @@ config CD_NO_IDESCSI
file drivers/cdrom/{driver_name}.h where you can define your
interface parameters and switch some internal goodies.
All these CD-ROM drivers are also usable as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want). If you want to compile them as module, say M instead of Y and
read <file:Documentation/modules.txt>.
To compile these CD-ROM drivers as a module, choose M instead of Y.
If you want to use any of these CD-ROM drivers, you also have to
answer Y or M to "ISO 9660 CD-ROM file system support" below (this
......@@ -49,10 +46,8 @@ config AZTCD
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called aztcd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called aztcd.
config GSCD
tristate "Goldstar R420 CDROM support"
......@@ -67,10 +62,8 @@ config GSCD
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called gscd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called gscd.
config SBPCD
tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
......@@ -107,10 +100,8 @@ config SBPCD
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sbpcd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called sbpcd.
config MCD
tristate "Mitsumi (standard) [no XA/Multisession] CDROM support"
......@@ -132,10 +123,8 @@ config MCD
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mcd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mcd.
config MCD_IRQ
int "MCD IRQ"
......@@ -173,10 +162,8 @@ config MCDX
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mcdx. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mcdx.
config OPTCD
tristate "Optics Storage DOLPHIN 8000AT CDROM support"
......@@ -192,10 +179,8 @@ config OPTCD
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called optcd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called optcd.
config CM206
tristate "Philips/LMS CM206 CDROM support"
......@@ -209,10 +194,8 @@ config CM206
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cm206. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cm206.
config SJCD
tristate "Sanyo CDR-H94A CDROM support"
......@@ -223,10 +206,8 @@ config SJCD
"ISO 9660 CD-ROM file system support" below, because that's the
file system used on CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sjcd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called sjcd.
config ISP16_CDI
tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
......@@ -238,10 +219,8 @@ config ISP16_CDI
to a driver for the particular cdrom drive you have attached to the
card. Read <file:Documentation/cdrom/isp16> for details.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called isp16. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called isp16.
config CDU31A
tristate "Sony CDU31A/CDU33A CDROM support"
......@@ -260,10 +239,8 @@ config CDU31A
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cdu31a. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cdu31a.
config CDU535
tristate "Sony CDU535 CDROM support"
......@@ -276,9 +253,7 @@ config CDU535
file system support" below, because that's the file system used on
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sonycd535. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called sonycd535.
endmenu
drivers/char/Kconfig
View file @ 77215b89
......@@ -90,10 +90,8 @@ config COMPUTONE
order to become a dial-in server. If you have a card like that, say
Y here and read <file:Documentation/computone.txt>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. You will get
two modules called ip2 and ip2main.
To compile this driver as modules, choose M here: the
modules will be called ip2 and ip2main.
config ROCKETPORT
tristate "Comtrol RocketPort support"
......@@ -104,9 +102,8 @@ config ROCKETPORT
modems. For information about the RocketPort/RocketModem boards
and this driver read <file:Documentation/rocket.txt>.
If you want to compile this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
rocket.
To compile this driver as a module, choose M here: the
module will be called rocket.
If you want to compile this driver into the kernel, say Y here. If
you don't have a Comtrol RocketPort/RocketModem card installed, say N.
......@@ -124,10 +121,8 @@ config CYCLADES
As of 1.3.9x kernels, this driver's minor numbers start at 0 instead
of 32.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called cyclades.
To compile this driver as a module, choose M here: the
module will be called cyclades.
If you haven't heard about it, it's safe to say N.
......@@ -159,8 +154,8 @@ config DIGIEPCA
"Digiboard PC/Xx Support" below. You should (and can) only select
one of the two drivers.
If you want to compile this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called epca.
To compile this driver as a module, choose M here: the
module will be called epca.
config DIGI
tristate "Digiboard PC/Xx Support"
......@@ -172,8 +167,8 @@ config DIGI
order to become a dial-in server. If you have a card like that, say
Y here and read the file <file:Documentation/digiboard.txt>.
If you want to compile this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called pcxx.
To compile this driver as a module, choose M here: the
module will be called pcxx.
config ESPSERIAL
tristate "Hayes ESP serial port support"
......@@ -183,10 +178,10 @@ config ESPSERIAL
port cards and multiport cards are supported. Make sure to read
<file:Documentation/hayes-esp.txt>.
To compile this driver as a module ( = code which can be inserted in
and removed from the running kernel whenever you want), say M here
and read <file:Documentation/modules.txt>. The module will be
called esp. If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called esp.
If unsure, say N.
config MOXA_INTELLIO
tristate "Moxa Intellio support"
......@@ -194,10 +189,8 @@ config MOXA_INTELLIO
help
Say Y here if you have a Moxa Intellio multiport serial card.
This driver can also be built as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called moxa. If you want to do that, say M
here.
To compile this driver as a module, choose M here: the
module will be called moxa.
config MOXA_SMARTIO
tristate "Moxa SmartIO support"
......@@ -216,10 +209,8 @@ config ISI
help
This is a driver for the Multi-Tech cards which provide several
serial ports. The driver is experimental and can currently only be
built as a module ( = code which can be inserted in and removed from
the running kernel whenever you want). Please read
<file:Documentation/modules.txt>. The module will be called
isicom.
built as a module. The module will be called isicom.
If you want to do that, choose M here.
config SYNCLINK
tristate "Microgate SyncLink card support"
......@@ -345,10 +336,8 @@ config STALLION
card, then this is for you; say Y. Make sure to read
<file:Documentation/stallion.txt>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called stallion.
To compile this driver as a module, choose M here: the
module will be called stallion.
config ISTALLION
tristate "Stallion EC8/64, ONboard, Brumby support"
......@@ -358,10 +347,8 @@ config ISTALLION
serial multiport card, say Y here. Make sure to read
<file:Documentation/stallion.txt>.
To compile it as a module ( = code which can be inserted in and
removed from the running kernel whenever you want), say M here and
read <file:Documentation/modules.txt>. The module will be called
istallion.
To compile this driver as a module, choose M here: the
module will be called istallion.
config SERIAL_TX3912
bool "TMPTX3912/PR31700 serial port support"
......@@ -437,8 +424,7 @@ config A2232
This driver can be built as a module; but then "generic_serial"
will also be built as a module. This has to be loaded before
"ser_a2232". If you want to do this, answer M here and read
"<file:Documentation/modules.txt>".
"ser_a2232". If you want to do this, answer M here.
source "drivers/serial/Kconfig"
......@@ -496,10 +482,9 @@ config PRINTER
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
corresponding drivers into the kernel. If you want to compile this
driver as a module however ( = code which can be inserted in and
removed from the running kernel whenever you want), say M here and
read <file:Documentation/modules.txt> and
corresponding drivers into the kernel.
To compile this driver as a module, choose M here and read
<file:Documentation/parport.txt>. The module will be called lp.
If you have several parallel ports, you can specify which ports to
......@@ -541,10 +526,8 @@ config PPDEV
It is safe to say N to this -- it is not needed for normal printing
or parallel port CD-ROM/disk support.
This support is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
ppdev.
To compile this driver as a module, choose M here: the
module will be called ppdev.
If unsure, say N.
......@@ -561,10 +544,8 @@ config TIPAR
to use this precise link cable (depending on the permissions on
the device nodes, though).
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tipar. If you want to compile it as a
module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called tipar.
If you don't know what a parallel link cable is or what a Texas
Instruments graphing calculator is, then you probably don't need this
......@@ -612,21 +593,18 @@ config BUSMOUSE
you will have to say Y here and also to the specific driver for your
mouse below.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called busmouse. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called busmouse.
endmenu
config QIC02_TAPE
tristate "QIC-02 tape support"
help
If you have a non-SCSI tape drive like that, say Y. Or, if you want
to compile this driver as a module ( = code which can be inserted in
and removed from the running kernel whenever you want), say M here
and read <file:Documentation/modules.txt>. The module will be called
tpqic02.
If you have a non-SCSI tape drive like that, say Y.
To compile this driver as a module, choose M here: the
module will be called tpqic02.
config QIC02_DYNCONF
bool "Do you want runtime configuration for QIC-02"
......@@ -687,11 +665,8 @@ config NWBUTTON
button; it will still execute a hard reset if the button is held
down for longer than approximately five seconds.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
nwbutton.
To compile this driver as a module, choose M here: the
module will be called nwbutton.
Most people will answer Y to this question and "Reboot Using Button"
below to be able to initiate a system shutdown from the button.
......@@ -718,10 +693,8 @@ config NWFLASH
flash contents can render your computer unbootable. On no account
allow random users access to this device. :-)
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called nwflash. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called nwflash.
If you're not sure, say N.
......@@ -735,10 +708,8 @@ config HW_RANDOM
Provides a character driver, used to read() entropy data.
To compile this driver as a module ( = code which can be inserted in
and removed from the running kernel whenever you want), say M here
and read <file:Documentation/modules.txt>. The module will be called
hw_random.
To compile this driver as a module, choose M here: the
module will be called hw_random.
If unsure, say N.
......@@ -764,10 +735,8 @@ config NVRAM
On Atari machines, /dev/nvram is always configured and does not need
to be selected.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called nvram. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called nvram.
config RTC
tristate "Enhanced Real Time Clock Support"
......@@ -792,10 +761,8 @@ config RTC
sampling), then say Y here, and read <file:Documentation/rtc.txt>
for details.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called rtc. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rtc.
config GEN_RTC
tristate "Generic /dev/rtc emulation"
......@@ -812,12 +779,9 @@ config GEN_RTC
for RTC_UIE which is required by some programs and may improve
precision in some cases.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called genrtc. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. To load the
module automatically add 'alias char-major-10-135 genrtc' to your
/etc/modules.conf
To compile this driver as a module, choose M here: the
module will be called genrtc. To load the module automatically
add 'alias char-major-10-135 genrtc' to your /etc/modules.conf
config GEN_RTC_X
bool "Extended RTC operation"
......@@ -854,10 +818,10 @@ config DTLK
help
This driver is for the DoubleTalk PC, a speech synthesizer
manufactured by RC Systems (<http://www.rcsys.com/>). It is also
called the `internal DoubleTalk'. If you want to compile this as a
module ( = code which can be inserted in and removed from the
running kernel whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called dtlk.
called the `internal DoubleTalk'.
To compile this driver as a module, choose M here: the
module will be called dtlk.
config R3964
tristate "Siemens R3964 line discipline"
......@@ -866,10 +830,8 @@ config R3964
Siemens R3964 packet protocol. Unless you are dealing with special
hardware like PLCs, you are unlikely to need this.
To compile this driver as a module ( = code which can be inserted in
and removed from the running kernel whenever you want), say M here
and read <file:Documentation/modules.txt>. The module will be called
n_r3964.
To compile this driver as a module, choose M here: the
module will be called n_r3964.
If unsure, say N.
......@@ -882,10 +844,8 @@ config APPLICOM
<http://www.applicom-int.com/>, or by email from David Woodhouse
<dwmw2@infradead.org>.
To compile this driver as a module ( = code which can be inserted in
and removed from the running kernel whenever you want), say M here
and read <file:Documentation/modules.txt>. The module will be called
applicom.
To compile this driver as a module, choose M here: the
module will be called applicom.
If unsure, say N.
......@@ -899,10 +859,8 @@ config SONYPI
If you have one of those laptops, read
<file:Documentation/sonypi.txt>, and say Y or M here.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called sonypi.
To compile this driver as a module, choose M here: the
module will be called sonypi.
menu "Ftape, the floppy tape device driver"
......@@ -931,9 +889,7 @@ config FTAPE
please read the file <file:drivers/char/ftape/README.PCI>.
The ftape kernel driver is also available as a runtime loadable
module ( = code which can be inserted in and removed from the
running kernel whenever you want). If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. The
module. To compile this driver as a module, choose M here: the
module will be called ftape.
Note that the Ftape-HOWTO is out of date (sorry) and documents the
......@@ -978,10 +934,8 @@ config MWAVE
If you own one of the above IBM Thinkpads which has the Mwave chipset
in it, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mwave. If you want to compile it as
a module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called mwave.
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
......
drivers/char/agp/Kconfig
View file @ 77215b89
......@@ -21,8 +21,7 @@ config AGP
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say N.
This driver is available as a module. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>. The
To compile this driver as a module, choose M here: the
module will be called agpgart.
config AGP_ALI
......
drivers/char/ftape/Kconfig
View file @ 77215b89
......@@ -14,11 +14,8 @@ config ZFTAPE
interface (i.e. the hardware independent part of the driver) has
been moved to a separate module.
If you say M zftape will be compiled as a runtime loadable
module ( = code which can be inserted in and removed from the
running kernel whenever you want). In this case you should read
<file:Documentation/modules.txt>. The module will be called
zftape.
To compile this driver as a module, choose M here: the
module will be called zftape.
Regardless of whether you say Y or M here, an additional runtime
loadable module called `zft-compressor' which contains code to
......
drivers/char/watchdog/Kconfig
View file @ 77215b89
......@@ -46,11 +46,8 @@ config SOFT_WATCHDOG
from some situations that the hardware watchdog will recover
from. Equally it's a lot cheaper to install.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
softdog.
To compile this driver as a module, choose M here: the
module will be called softdog.
config WDT
tristate "WDT Watchdog timer"
......@@ -63,10 +60,8 @@ config WDT
documentation of your boot loader (lilo or loadlin) about how to
pass options to the kernel at boot time).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called wdt.
To compile this driver as a module, choose M here: the
module will be called wdt.
config WDT_501
bool "WDT501 features"
......@@ -97,10 +92,8 @@ config WDTPCI
boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called wdt_pci.
To compile this driver as a module, choose M here: the
module will be called wdt_pci.
config WDT_501_PCI
bool "WDT501-PCI features"
......@@ -124,10 +117,8 @@ config PCWATCHDOG
hardware. Please read <file:Documentation/pcwd-watchdog.txt>. The PC
watchdog cards can be ordered from <http://www.berkprod.com/>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called pcwd. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pcwd.
Most people will say N.
......@@ -139,13 +130,12 @@ config ACQUIRE_WDT
Board Computer produced by Acquire Inc (and others). This watchdog
simply watches your kernel to make sure it doesn't freeze, and if
it does, it reboots your computer after a certain amount of time.
This driver is like the WDT501 driver but for different hardware.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called acquirewdt. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
To compile this driver as a module, choose M here: the
module will be called acquirewdt.
Most people will say N.
config ADVANTECH_WDT
tristate "Advantech SBC Watchdog Timer"
......@@ -187,10 +177,8 @@ config SA1100_WATCHDOG
system when timeout is reached.
NOTE, that once enabled, this timer cannot be disabled.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called sa1100_wdt.
To compile this driver as a module, choose M here: the
module will be called sa1100_wdt.
config EUROTECH_WDT
tristate "Eurotech CPU-1220/1410 Watchdog Timer"
......@@ -211,11 +199,10 @@ config IB700_WDT
This driver is like the WDT501 driver but for slightly different hardware.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called ib700wdt. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. Most people
will say N.
To compile this driver as a module, choose M here: the
module will be called ib700wdt.
Most people will say N.
config I810_TCO
tristate "Intel i8xx TCO timer / Watchdog"
......@@ -234,9 +221,8 @@ config I810_TCO
machine. If this is the case you will get a kernel message like
"i810tco init: failed to reset NO_REBOOT flag".
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
i810-tco.
To compile this driver as a module, choose M here: the
module will be called i810-tco.
config MIXCOMWD
tristate "Mixcom Watchdog"
......@@ -247,11 +233,10 @@ config MIXCOMWD
and if it does, it reboots your computer after a certain amount of
time.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called mixcomwd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
To compile this driver as a module, choose M here: the
module will be called mixcomwd.
Most people will say N.
config SCx200_WDT
tristate "NatSemi SCx200 Watchdog"
......@@ -286,11 +271,10 @@ config W83877F_WDT
and if it does, it reboots your computer after a certain amount of
time.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called w83877f_wdt. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
To compile this driver as a module, choose M here: the
module will be called w83877f_wdt.
Most people will say N.
config MACHZ_WDT
tristate "ZF MachZ Watchdog"
......@@ -302,10 +286,8 @@ config MACHZ_WDT
your kernel to make sure it doesn't freeze, and if it does, it
reboots your computer after a certain amount of time.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called machzwd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called machzwd.
config SC520_WDT
tristate "AMD Elan SC520 processor Watchdog"
......@@ -340,11 +322,10 @@ config ALIM7101_WDT
This is the driver for the hardware watchdog on the ALi M7101 PMU
as used in the x86 Cobalt servers.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called alim7101_wdt. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
To compile this driver as a module, choose M here: the
module will be called alim7101_wdt.
Most people will say N.
config ALIM1535_WDT
tristate "ALi M1535 PMU Watchdog Timer"
......@@ -352,11 +333,10 @@ config ALIM1535_WDT
---help---
This is the driver for the hardware watchdog on the ALi M1535 PMU.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called alim1535_wdt. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
To compile this driver as a module, choose M here: the
module will be called alim1535_wdt.
Most people will say N.
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
......@@ -367,11 +347,10 @@ config SC1200_WDT
for power management purposes and can be used to power down the device
during inactivity periods (includes interrupt activity monitoring).
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called sc1200wdt. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
To compile this driver as a module, choose M here: the
module will be called sc1200wdt.
Most people will say N.
config WAFER_WDT
tristate "ICP Wafer 5823 Single Board Computer Watchdog"
......@@ -380,20 +359,15 @@ config WAFER_WDT
This is a driver for the hardware watchdog on the ICP Wafer 5823
Single Board Computer (and probably other similar models).
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
wafer5823wdt.
To compile this driver as a module, choose M here: the
module will be called wafer5823wdt.
config CPU5_WDT
tristate "SMA CPU5 Watchdog"
depends on WATCHDOG
---help---
TBD.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called cpu5wdt. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cpu5wdt.
endmenu
drivers/fc4/Kconfig
View file @ 77215b89
......@@ -33,10 +33,8 @@ config FC4_SOC
that if you have older firmware in the card, you'll need the
microcode from the Solaris driver to make it work.
This support is also available as a module called soc ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this support as a module, choose M here: the module will
be called soc.
config FC4_SOCAL
tristate "Sun SOC+ (aka SOCAL)"
......@@ -48,10 +46,8 @@ config FC4_SOCAL
Interface Board). You'll probably need the microcode from the
Solaris driver to make it work.
This support is also available as a module called socal ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this support as a module, choose M here: the module will
be called socal.
comment "FC4 targets"
depends on FC4
......@@ -62,10 +58,8 @@ config SCSI_PLUTO
help
If you never bought a disk array made by Sun, go with N.
This support is also available as a module called pluto ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this support as a module, choose M here: the module will
be called pluto.
config SCSI_FCAL
tristate "Sun Enterprise Network Array (A5000 and EX500)" if SPARC32 || SPARC64
......@@ -76,10 +70,8 @@ config SCSI_FCAL
common is either A5000 array or internal disks in E[3-6]000
machines.
This support is also available as a module called fcal ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>. If unsure, say N.
To compile this support as a module, choose M here: the module will
be called fcal.
config SCSI_FCAL
prompt "Generic FC-AL disk driver"
......
drivers/ide/Kconfig
View file @ 77215b89
......@@ -43,10 +43,8 @@ config IDE
number of user programs such as smart that can query the status of
SMART parameters from disk drives.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ide.
To compile this driver as a module, choose M here: the
module will be called ide.
For further information, please read <file:Documentation/ide.txt>.
......@@ -83,9 +81,7 @@ config BLK_DEV_IDE
performance, look for the hdparm package at
<ftp://ibiblio.org/pub/Linux/system/hardware/>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> and
To compile this driver as a module, choose M here and read
<file:Documentation/ide.txt>. The module will be called ide-mod.
Do not compile this driver as a module if your root file system (the
one containing the directory /) is located on an IDE device.
......@@ -143,12 +139,12 @@ config BLK_DEV_IDEDISK
the old hard disk driver instead, say Y. If you have an SCSI-only
system, you can say N here.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ide-disk. Do not compile this driver as a module
if your root file system (the one containing the directory /) is
located on the IDE disk. If unsure, say Y.
To compile this driver as a module, choose M here: the
module will be called ide-disk.
Do not compile this driver as a module if your root file system
(the one containing the directory /) is located on the IDE disk.
If unsure, say Y.
config IDEDISK_MULTI_MODE
bool "Use multi-mode by default"
......@@ -201,10 +197,8 @@ config BLK_DEV_IDECD
with IDE/ATAPI CD-ROMs, so install LILO 16 or higher, available from
<ftp://brun.dyndns.org/pub/linux/lilo/>.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ide-cd.
To compile this driver as a module, choose M here: the
module will be called ide-cd.
config BLK_DEV_IDETAPE
tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
......@@ -226,10 +220,8 @@ config BLK_DEV_IDETAPE
<file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
for usage information.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ide-tape.o.
To compile this driver as a module, choose M here: the
module will be called ide-tape.
config BLK_DEV_IDEFLOPPY
tristate "Include IDE/ATAPI FLOPPY support"
......@@ -250,10 +242,8 @@ config BLK_DEV_IDEFLOPPY
other IDE devices, as "hdb" or "hdc", or something similar (check
the boot messages with dmesg).
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ide-floppy.
To compile this driver as a module, choose M here: the
module will be called ide-floppy.
config BLK_DEV_IDESCSI
tristate "SCSI emulation support"
......
drivers/ieee1394/Kconfig
View file @ 77215b89
......@@ -15,10 +15,8 @@ config IEEE1394
is the core support only, you will also need to select a driver for
your IEEE 1394 adapter.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ieee1394.
To compile this driver as a module, choose M here: the
module will be called ieee1394.
comment "Subsystem Options"
depends on IEEE1394
......@@ -64,10 +62,8 @@ config IEEE1394_PCILYNX
Instruments PCILynx chip. Note: this driver is written for revision
2 of this chip and may not work with revision 0.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called pcilynx.
To compile this driver as a module, choose M here: the
module will be called pcilynx.
# Non-maintained pcilynx options
# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then
......@@ -84,10 +80,8 @@ config IEEE1394_OHCI1394
use one of these chipsets. It should work with any OHCI-1394
compliant card, however.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ohci1394.
To compile this driver as a module, choose M here: the
module will be called ohci1394.
comment "Protocol Drivers"
depends on IEEE1394
......@@ -128,10 +122,8 @@ config IEEE1394_DV1394
The user-space API for dv1394 is documented in dv1394.h.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called dv1394.
To compile this driver as a module, choose M here: the
module will be called dv1394.
config IEEE1394_RAWIO
tristate "Raw IEEE1394 I/O support"
......@@ -142,10 +134,8 @@ config IEEE1394_RAWIO
direct communication of user programs with the IEEE 1394 bus and
thus with the attached peripherals.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called raw1394.
To compile this driver as a module, choose M here: the
module will be called raw1394.
config IEEE1394_CMP
tristate "IEC61883-1 Plug support"
......@@ -154,10 +144,8 @@ config IEEE1394_CMP
This option enables the Connection Management Procedures
(IEC61883-1) driver, which implements input and output plugs.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called amdtp.
To compile this driver as a module, choose M here: the
module will be called cmp.
config IEEE1394_AMDTP
tristate "IEC61883-6 (Audio transmission) support"
......@@ -169,9 +157,7 @@ config IEEE1394_AMDTP
The userspace interface is documented in amdtp.h.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called amdtp.
To compile this driver as a module, choose M here: the
module will be called amdtp.
endmenu
drivers/input/Kconfig
View file @ 77215b89
......@@ -19,10 +19,8 @@ config INPUT
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called input. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called input.
comment "Userland interfaces"
......@@ -39,10 +37,8 @@ config INPUT_MOUSEDEV
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mousedev. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mousedev.
config INPUT_MOUSEDEV_PSAUX
bool "Provide legacy /dev/psaux device" if EMBEDDED
......@@ -80,10 +76,8 @@ config INPUT_JOYDEV
More information is available: <file:Documentation/input/joystick.txt>
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called joydev. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called joydev.
config INPUT_TSDEV
tristate "Touchscreen interface"
......@@ -95,10 +89,8 @@ config INPUT_TSDEV
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tsdev. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called tsdev.
config INPUT_TSDEV_SCREEN_X
int "Horizontal screen resolution"
......@@ -117,10 +109,8 @@ config INPUT_EVDEV
Say Y here if you want your input device events be accessible
under char device 13:64+ - /dev/input/eventX in a generic way.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called evdev. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called evdev.
config INPUT_EVBUG
tristate "Event debugging"
......@@ -134,10 +124,8 @@ config INPUT_EVBUG
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called joydev. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called evbug.
comment "Input I/O drivers"
......
drivers/input/gameport/Kconfig
View file @ 77215b89
......@@ -16,10 +16,8 @@ config GAMEPORT
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called gameport. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called gameport.
config SOUND_GAMEPORT
tristate
......@@ -34,10 +32,8 @@ config GAMEPORT_NS558
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ns558. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ns558.
config GAMEPORT_L4
tristate "PDPI Lightning 4 gamecard support"
......@@ -45,10 +41,8 @@ config GAMEPORT_L4
help
Say Y here if you have a PDPI Lightning 4 gamecard.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called lightning. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called lightning.
config GAMEPORT_EMU10K1
tristate "SB Live and Audigy gameport support"
......@@ -57,10 +51,8 @@ config GAMEPORT_EMU10K1
Say Y here if you have a SoundBlaster Live! or SoundBlaster
Audigy card and want to use its gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called emu10k1-gp. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called emu10k1-gp.
config GAMEPORT_VORTEX
tristate "Aureal Vortex, Vortex 2 gameport support"
......@@ -69,10 +61,8 @@ config GAMEPORT_VORTEX
Say Y here if you have an Aureal Vortex 1 or 2 card and want
to use its gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called vortex. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called vortex.
config GAMEPORT_FM801
tristate "ForteMedia FM801 gameport support"
......
drivers/input/joystick/Kconfig
View file @ 77215b89
......@@ -27,10 +27,8 @@ config JOYSTICK_ANALOG
Please read the file <file:Documentation/input/joystick.txt> which
contains more information.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called analog. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called analog.
config JOYSTICK_A3D
tristate "Assasin 3D and MadCatz Panther devices"
......@@ -39,10 +37,8 @@ config JOYSTICK_A3D
Say Y here if you have an FPGaming or MadCatz controller using the
A3D protocol over the PC gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called a3d. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called a3d.
config JOYSTICK_ADI
tristate "Logitech ADI digital joysticks and gamepads"
......@@ -51,10 +47,8 @@ config JOYSTICK_ADI
Say Y here if you have a Logitech controller using the ADI
protocol over the PC gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called adi. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called adi.
config JOYSTICK_COBRA
tristate "Creative Labs Blaster Cobra gamepad"
......@@ -62,10 +56,8 @@ config JOYSTICK_COBRA
help
Say Y here if you have a Creative Labs Blaster Cobra gamepad.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cobra. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cobra.
config JOYSTICK_GF2K
tristate "Genius Flight2000 Digital joysticks and gamepads"
......@@ -74,10 +66,8 @@ config JOYSTICK_GF2K
Say Y here if you have a Genius Flight2000 or MaxFighter digitally
communicating joystick or gamepad.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called gf2k. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called gf2k.
config JOYSTICK_GRIP
tristate "Gravis GrIP joysticks and gamepads"
......@@ -86,10 +76,8 @@ config JOYSTICK_GRIP
Say Y here if you have a Gravis controller using the GrIP protocol
over the PC gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called grip. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called grip.
config JOYSTICK_GRIP_MP
tristate "Gravis GrIP MultiPort"
......@@ -98,10 +86,8 @@ config JOYSTICK_GRIP_MP
Say Y here if you have the original Gravis GrIP MultiPort, a hub
that connects to the gameport and you connect gamepads to it.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called grip_mp. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called grip_mp.
config JOYSTICK_GUILLEMOT
tristate "Guillemot joysticks and gamepads"
......@@ -110,10 +96,8 @@ config JOYSTICK_GUILLEMOT
Say Y here if you have a Guillemot joystick using a digital
protocol over the PC gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called guillemot. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called guillemot.
config JOYSTICK_INTERACT
tristate "InterAct digital joysticks and gamepads"
......@@ -122,10 +106,8 @@ config JOYSTICK_INTERACT
Say Y here if you have an InterAct gameport or joystick
communicating digitally over the gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called interact. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called interact.
config JOYSTICK_SIDEWINDER
tristate "Microsoft SideWinder digital joysticks and gamepads"
......@@ -134,10 +116,8 @@ config JOYSTICK_SIDEWINDER
Say Y here if you have a Microsoft controller using the Digital
Overdrive protocol over PC gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sidewinder. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called sidewinder.
config JOYSTICK_TMDC
tristate "ThrustMaster DirectConnect joysticks and gamepads"
......@@ -146,10 +126,8 @@ config JOYSTICK_TMDC
Say Y here if you have a ThrustMaster controller using the
DirectConnect (BSP) protocol over the PC gameport.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tmdc. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called tmdc.
source "drivers/input/joystick/iforce/Kconfig"
......@@ -160,10 +138,8 @@ config JOYSTICK_WARRIOR
Say Y here if you have a Logitech WingMan Warrior joystick connected
to your computer's serial port.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called warrior. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called warrior.
config JOYSTICK_MAGELLAN
tristate "LogiCad3d Magellan/SpaceMouse 6dof controllers"
......@@ -172,10 +148,8 @@ config JOYSTICK_MAGELLAN
Say Y here if you have a Magellan or Space Mouse 6DOF controller
connected to your computer's serial port.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called magellan. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called magellan.
config JOYSTICK_SPACEORB
tristate "SpaceTec SpaceOrb/Avenger 6dof controllers"
......@@ -184,10 +158,8 @@ config JOYSTICK_SPACEORB
Say Y here if you have a SpaceOrb 360 or SpaceBall Avenger 6DOF
controller connected to your computer's serial port.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called spaceorb. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called spaceorb.
config JOYSTICK_SPACEBALL
tristate "SpaceTec SpaceBall 6dof controllers"
......@@ -197,10 +169,8 @@ config JOYSTICK_SPACEBALL
controller connected to your computer's serial port. For the
SpaceBall 4000 USB model, use the USB HID driver.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called spaceball. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called spaceball.
config JOYSTICK_STINGER
tristate "Gravis Stinger gamepad"
......@@ -209,10 +179,8 @@ config JOYSTICK_STINGER
Say Y here if you have a Gravis Stinger connected to one of your
serial ports.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called stinger. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called stinger.
config JOYSTICK_TWIDDLER
tristate "Twiddler as a joystick"
......@@ -221,10 +189,8 @@ config JOYSTICK_TWIDDLER
Say Y here if you have a Handykey Twiddler connected to your
computer's serial port and want to use it as a joystick.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called twidjoy. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called twidjoy.
config JOYSTICK_DB9
tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
......@@ -236,10 +202,8 @@ config JOYSTICK_DB9
For more information on how to use the driver please read
<file:Documentation/input/joystick-parport.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called db9. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called db9.
config JOYSTICK_GAMECON
tristate "Multisystem, NES, SNES, N64, PSX joysticks and gamepads"
......@@ -252,10 +216,8 @@ config JOYSTICK_GAMECON
For more information on how to use the driver please read
<file:Documentation/input/joystick-parport.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called gamecon. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called gamecon.
config JOYSTICK_TURBOGRAFX
tristate "Multisystem joysticks via TurboGraFX device"
......@@ -266,10 +228,8 @@ config JOYSTICK_TURBOGRAFX
Amstrad CPC joystick. For more information on how to use the driver
please read <file:Documentation/input/joystick-parport.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called turbografx. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called turbografx.
config JOYSTICK_AMIGA
tristate "Amiga joysticks"
......@@ -278,10 +238,8 @@ config JOYSTICK_AMIGA
Say Y here if you have an Amiga with a digital joystick connected
to it.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called amijoy. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called amijoy.
config INPUT_JOYDUMP
tristate "Gameport data dumper"
......@@ -291,8 +249,6 @@ config INPUT_JOYDUMP
log for debugging purposes. Say N if you are making a production
configuration or aren't sure.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called joydump. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called joydump.
drivers/input/joystick/iforce/Kconfig
View file @ 77215b89
......@@ -9,10 +9,8 @@ config JOYSTICK_IFORCE
You also must choose at least one of the two options below.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called iforce. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called iforce.
config JOYSTICK_IFORCE_USB
bool "I-Force USB joysticks and wheels"
......
drivers/input/keyboard/Kconfig
View file @ 77215b89
......@@ -23,10 +23,8 @@ config KEYBOARD_ATKBD
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called atkbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called atkbd.
config KEYBOARD_SUNKBD
tristate "Sun Type 4 and Type 5 keyboard support"
......@@ -36,10 +34,8 @@ config KEYBOARD_SUNKBD
connected either to the Sun keyboard connector or to an serial
(RS-232) port via a simple adapter.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sunkbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called sunkbd.
config KEYBOARD_XTKBD
tristate "XT Keyboard support"
......@@ -50,10 +46,8 @@ config KEYBOARD_XTKBD
parallel port keyboard adapter, you cannot connect it to the
keyboard port on a PC that runs Linux.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called xtkbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called xtkbd.
config KEYBOARD_NEWTON
tristate "Newton keyboard"
......@@ -61,10 +55,8 @@ config KEYBOARD_NEWTON
help
Say Y here if you have a Newton keyboard on a serial port.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called maple_keyb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called newtonkbd.
config KEYBOARD_MAPLE
tristate "Maple bus keyboard support"
......@@ -73,10 +65,8 @@ config KEYBOARD_MAPLE
Say Y here if you have a DreamCast console running Linux and have
a keyboard attached to its Maple bus.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called maple_keyb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called maple_keyb.
config KEYBOARD_AMIGA
tristate "Amiga keyboard"
......@@ -85,10 +75,8 @@ config KEYBOARD_AMIGA
Say Y here if you are running Linux on any AMIGA and have a keyboard
attached.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called amikbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called amikbd.
config KEYBOARD_98KBD
tristate "NEC PC-9800 Keyboard support"
......@@ -97,8 +85,6 @@ config KEYBOARD_98KBD
Say Y here if you want to use the NEC PC-9801/PC-9821 keyboard (or
compatible) on your system.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called xtkbd.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called 98kbd.
drivers/input/misc/Kconfig
View file @ 77215b89
......@@ -21,10 +21,8 @@ config INPUT_PCSPKR
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pcspkr. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pcspkr.
config INPUT_SPARCSPKR
tristate "SPARC Speaker support"
......@@ -35,10 +33,8 @@ config INPUT_SPARCSPKR
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pcspkr. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called sparcspkr.
config INPUT_M68K_BEEP
tristate "M68k Beeper support"
......@@ -55,10 +51,8 @@ config INPUT_UINPUT
Say Y here if you want to support user level drivers for input
subsystem accessible under char device 10:223 - /dev/input/uinput.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called uinput. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called uinput.
config INPUT_GSC
tristate "PA-RISC GSC PS/2 keyboard/mouse support"
......
drivers/input/mouse/Kconfig
View file @ 77215b89
......@@ -25,10 +25,8 @@ config MOUSE_PS2
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called psmouse. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called psmouse.
config MOUSE_SERIAL
tristate "Serial mouse"
......@@ -40,10 +38,8 @@ config MOUSE_SERIAL
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sermouse. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called sermouse.
config MOUSE_INPORT
tristate "InPort/MS/ATIXL busmouse"
......@@ -52,10 +48,8 @@ config MOUSE_INPORT
Say Y here if you have an InPort, Microsoft or ATI XL busmouse.
They are rather rare these days.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called inport. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called inport.
config MOUSE_ATIXL
bool "ATI XL variant"
......@@ -70,10 +64,8 @@ config MOUSE_LOGIBM
Say Y here if you have a Logitech busmouse.
They are rather rare these days.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called logibm. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called logibm.
config MOUSE_PC110PAD
tristate "IBM PC110 touchpad"
......@@ -82,10 +74,8 @@ config MOUSE_PC110PAD
Say Y if you have the IBM PC-110 micro-notebook and want its
touchpad supported.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pc110pad. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pc110pad.
config MOUSE_MAPLE
tristate "Maple bus mouse"
......@@ -94,10 +84,8 @@ config MOUSE_MAPLE
Say Y if you have a DreamCast console and a mouse attached to
its Maple bus.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called maplemouse. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called maplemouse.
config MOUSE_AMIGA
tristate "Amiga mouse"
......@@ -106,10 +94,8 @@ config MOUSE_AMIGA
Say Y here if you have an Amiga and want its native mouse
supported by the kernel.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called amimouse. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called amimouse.
config MOUSE_RISCPC
tristate "Acorn RiscPC mouse"
......@@ -118,10 +104,8 @@ config MOUSE_RISCPC
Say Y here if you have the Acorn RiscPC computer and want its
native mouse supported.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rpcmouse. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rpcmouse.
config MOUSE_PC9800
tristate "NEC PC-9800 busmouse"
......@@ -130,8 +114,6 @@ config MOUSE_PC9800
Say Y here if you have NEC PC-9801/PC-9821 computer and want its
native mouse supported.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called logibm.o. If you want to compile it as a
module, say M here and read <file.:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called 98busmouse.
drivers/input/serio/Kconfig
View file @ 77215b89
......@@ -13,10 +13,8 @@ config SERIO
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called serio. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called serio.
config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
......@@ -29,10 +27,8 @@ config SERIO_I8042
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called i8042. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called i8042.
config SERIO_SERPORT
tristate "Serial port line discipline"
......@@ -46,10 +42,8 @@ config SERIO_SERPORT
If unsure, say Y.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called serport. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called serport.
config SERIO_CT82C710
tristate "ct82c710 Aux port controller"
......@@ -61,10 +55,8 @@ config SERIO_CT82C710
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ct82c710. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ct82c710.
config SERIO_Q40KBD
tristate "Q40 keyboard controller"
......@@ -81,10 +73,8 @@ config SERIO_PARKBD
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called parkbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called parkbd.
config SERIO_RPCKBD
tristate "Acorn RiscPC keyboard controller"
......@@ -94,10 +84,8 @@ config SERIO_RPCKBD
Say Y here if you have the Acorn RiscPC and want to use an AT
keyboard connected to its keyboard controller.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rpckbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rpckbd.
config SERIO_AMBAKMI
tristate "AMBA KMI keyboard controller"
......@@ -114,10 +102,8 @@ config SERIO_98KBD
Say Y here if you have the NEC PC-9801/PC-9821 and want to use its
standard keyboard connected to its keyboard controller.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rpckbd.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called 98kbd-io.
config SERIO_PCIPS2
tristate "PCI PS/2 keyboard and PS/2 mouse controller"
......@@ -126,7 +112,5 @@ config SERIO_PCIPS2
Say Y here if you have a Mobility Docking station with PS/2
keyboard and mice ports.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rpckbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pcips2.
drivers/input/touchscreen/Kconfig
View file @ 77215b89
......@@ -18,10 +18,8 @@ config TOUCHSCREEN_BITSY
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called gunze. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called h3600_ts_input.
config TOUCHSCREEN_GUNZE
tristate "Gunze AHL-51S touchscreen"
......@@ -32,8 +30,6 @@ config TOUCHSCREEN_GUNZE
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called gunze. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called gunze.
drivers/isdn/sc/Kconfig
View file @ 77215b89
......@@ -6,9 +6,8 @@ config ISDN_DRV_SC
depends on ISDN && ISA
help
This enables support for the Spellcaster BRI ISDN boards. This
driver currently builds only in a modularized version ( = code which
can be inserted in and removed from the running kernel whenever you
want, details in <file:Documentation/modules.txt>); the module will
be called sc. See <file:Documentation/isdn/README.sc> and
driver currently builds only in a modularized version.
To build it, choose M here: the module will be called sc.
See <file:Documentation/isdn/README.sc> and
<http://www.spellcast.com/> for more information.
drivers/media/Kconfig
View file @ 77215b89
......@@ -21,10 +21,8 @@ config VIDEO_DEV
Documentation/video4linux/API.html. Documentation for V4L2 is
available on the web at http://bytesex.org/v4l/
This driver is also available as a module called videodev ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called videodev.
source "drivers/media/video/Kconfig"
......
drivers/media/dvb/ttpci/Kconfig
View file @ 77215b89
......@@ -33,11 +33,8 @@ config DVB_BUDGET
Say Y if you own such a card and want to use it.
This driver is available as a module called
dvb-ttpci-budget.o ( = code which can be inserted in
and removed from the running kernel whenever you want).
If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called budget.
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
......@@ -49,11 +46,8 @@ config DVB_BUDGET_CI
Say Y if you own such a card and want to use it.
This driver is available as a module called
dvb-ttpci-budget-av.o ( = code which can be inserted in
and removed from the running kernel whenever you want).
If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called budget-ci.
config DVB_BUDGET_AV
tristate "Budget cards with analog video inputs"
......@@ -65,10 +59,8 @@ config DVB_BUDGET_AV
Say Y if you own such a card and want to use it.
This driver is available as a module called
dvb-ttpci-budget-av.o ( = code which can be inserted in
and removed from the running kernel whenever you want).
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called budget-av.
config DVB_BUDGET_PATCH
tristate "AV7110 cards with Budget Patch"
......@@ -85,8 +77,5 @@ config DVB_BUDGET_PATCH
Say Y if you own such a card and want to use it.
This driver is available as a module called
dvb-ttpci-budget-patch.o ( = code which can be inserted in
and removed from the running kernel whenever you want).
If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called budget-patch.
drivers/media/radio/Kconfig
View file @ 77215b89
......@@ -20,10 +20,8 @@ config RADIO_CADET
Further documentation on this driver can be found on the WWW at
<http://linux.blackhawke.net/cadet.html>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-cadet.
To compile this driver as a module, choose M here: the
module will be called radio-cadet.
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
......@@ -48,10 +46,8 @@ config RADIO_RTRACK
information is contained in the file
<file:Documentation/video4linux/radiotrack.txt>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-aimslab.
To compile this driver as a module, choose M here: the
module will be called radio-aimslab.
config RADIO_RTRACK_PORT
hex "RadioTrack i/o port (0x20f or 0x30f)"
......@@ -73,10 +69,8 @@ config RADIO_RTRACK2
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-rtrack2.
To compile this driver as a module, choose M here: the
module will be called radio-rtrack2.
config RADIO_RTRACK2_PORT
hex "RadioTrack II i/o port (0x20c or 0x30c)"
......@@ -98,10 +92,8 @@ config RADIO_AZTECH
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-aztech.
To compile this driver as a module, choose M here: the
module will be called radio-aztech.
config RADIO_AZTECH_PORT
hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
......@@ -124,10 +116,8 @@ config RADIO_GEMTEK
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-gemtek.
To compile this driver as a module, choose M here: the
module will be called radio-gemtek.
config RADIO_GEMTEK_PORT
hex "GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)"
......@@ -150,10 +140,8 @@ config RADIO_GEMTEK_PCI
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-gemtek-pci.
To compile this driver as a module, choose M here: the
module will be called radio-gemtek-pci.
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
......@@ -167,10 +155,8 @@ config RADIO_MAXIRADIO
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-maxiradio.
To compile this driver as a module, choose M here: the
module will be called radio-maxiradio.
config RADIO_MAESTRO
tristate "Maestro on board radio"
......@@ -184,10 +170,8 @@ config RADIO_MAESTRO
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-maestro.
To compile this driver as a module, choose M here: the
module will be called radio-maestro.
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
......@@ -202,10 +186,8 @@ config RADIO_MIROPCM20
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called miropcm20.
To compile this driver as a module, choose M here: the
module will be called miropcm20.
config RADIO_MIROPCM20_RDS
tristate "miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)"
......@@ -221,7 +203,8 @@ config RADIO_MIROPCM20_RDS
availability of RDS is reported over V4L by the basic driver
already. Here RDS can be read from files in /dev/v4l/rds.
As module the driver will be called miropcm20-rds.
To compile this driver as a module, choose M here: the
module will be called miropcm20-rds.
config RADIO_SF16FMI
tristate "SF16FMI Radio"
......@@ -237,10 +220,8 @@ config RADIO_SF16FMI
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-sf16fmi.
To compile this driver as a module, choose M here: the
module will be called radio-sf16fmi.
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
......@@ -260,10 +241,8 @@ config RADIO_TERRATEC
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-terratec.
To compile this driver as a module, choose M here: the
module will be called radio-terratec.
config RADIO_TERRATEC_PORT
hex "Terratec i/o port (normally 0x590)"
......@@ -280,10 +259,8 @@ config RADIO_TRUST
This is a driver for the Trust FM radio cards. Say Y if you have
such a card and want to use it under Linux.
This driver is also available as a module called radio-trust ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called radio-trust.
config RADIO_TRUST_PORT
hex "Trust i/o port (usually 0x350 or 0x358)"
......@@ -305,10 +282,8 @@ config RADIO_TYPHOON
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-typhoon.
To compile this driver as a module, choose M here: the
module will be called radio-typhoon.
config RADIO_TYPHOON_PROC_FS
bool "Support for /proc/radio-typhoon"
......@@ -351,10 +326,8 @@ config RADIO_ZOLTRIX
this API and pointers to "v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called radio-zoltrix.
To compile this driver as a module, choose M here: the
module will be called radio-zoltrix.
config RADIO_ZOLTRIX_PORT
hex "ZOLTRIX I/O port (0x20c or 0x30c)"
......
drivers/media/video/Kconfig
View file @ 77215b89
......@@ -18,20 +18,17 @@ config VIDEO_BT848
If you say Y or M here, you need to say Y or M to "I2C support" and
"I2C bit-banging interfaces" in the character device section.
This driver is available as a module called bttv ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called bttv.
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
depends on VIDEO_DEV && ISA
help
Say Y if you have such a thing. This driver is also available as a
module called pms ( = code which can be inserted in and removed
from the running kernel whenever you want). If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
Say Y if you have such a thing.
To compile this driver as a module, choose M here: the
module will be called pms.
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
......@@ -51,10 +48,8 @@ config VIDEO_BWQCAM
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
This driver is also available as a module called bw-qcam ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called bw-qcam.
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
......@@ -122,10 +117,8 @@ config VIDEO_SAA5249
Support for I2C bus based teletext using the SAA5249 chip. At the
moment this is only useful on some European WinTV cards.
This driver is also available as a module called saa5249 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called saa5249.
config TUNER_3036
tristate "SAB3036 tuner"
......@@ -159,10 +152,8 @@ config VIDEO_ZORAN
a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
more information, check <file:Documentation/video4linux/Zoran>.
This driver is available as a module called zr36067 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called zr36067.
config VIDEO_ZORAN_BUZ
tristate "Iomega Buz support"
......@@ -208,10 +199,8 @@ config VIDEO_ZR36120
and Buster boards. Please read the material in
<file:Documentation/video4linux/zr36120.txt> for more information.
This driver is also available as a module called zr36120 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called zr36120.
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux (EXPERIMENTAL)"
......@@ -224,10 +213,8 @@ config VIDEO_MEYE
If you say Y or M here, you need to say Y or M to "Sony Programmable
I/O Control Device" in the character device section.
This driver is available as a module called meye ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called meye.
config VIDEO_SAA7134
tristate "Philips SAA7134 support"
......@@ -236,10 +223,8 @@ config VIDEO_SAA7134
This is a video4linux driver for Philips SAA7130/7134 based
TV cards.
This driver is available as a module called saa7134 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called saa7134.
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
......@@ -248,10 +233,8 @@ config VIDEO_MXB
This is a video4linux driver for the 'Multimedia eXtension Board'
TV card by Siemens-Nixdorf.
This driver is available as a module called mxb ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mxb.
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
......@@ -263,10 +246,8 @@ config VIDEO_DPC
saa7146 based, analog video card, chances are good that it
will work with this skeleton driver.
This driver is available as a module called dpc7146 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called dpc7146.
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
......@@ -275,10 +256,8 @@ config VIDEO_HEXIUM_ORION
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
This driver is available as a module called hexium_orion
( = code which can be inserted in and removed from the
running kernel whenever you want). If you want to compile
it as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called hexium_orion.
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
......@@ -288,10 +267,8 @@ config VIDEO_HEXIUM_GEMINI
grabber card by Hexium. Please note that the Gemini Dual
card is *not* fully supported.
This driver is available as a module called hexium_gemini
( = code which can be inserted in and removed from the
running kernel whenever you want). If you want to compile
it as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called hexium_gemini.
endmenu
drivers/message/fusion/Kconfig
View file @ 77215b89
......@@ -29,11 +29,7 @@ config FUSION
[2] In order enable capability to boot the linux kernel
natively from a Fusion MPT target device, you MUST
answer Y here! (currently requires CONFIG_BLK_DEV_SD)
[3] This support is also available as a module ( = code
which can be inserted in and removed from the running
kernel whenever you want). If you want to compile as
modules, say M here and read
<file:Documentation/modules.txt>.
[3] To compile this support as modules, choose M here.
If unsure, say N.
......
drivers/message/i2o/Kconfig
View file @ 77215b89
......@@ -19,11 +19,8 @@ config I2O
If you say Y here, you will get a choice of interface adapter
drivers and OSM's with the following questions.
This support is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. You will get modules called
i2o_core and i2o_config.
To compile this support as a module, choose M here: the
modules will be called i2o_core and i2o_config.
If unsure, say N.
......@@ -34,10 +31,8 @@ config I2O_PCI
Say Y for support of PCI bus I2O interface adapters. Currently this
is the only variety supported, so you should say Y.
This support is also available as a module called i2o_pci ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this support as a module, choose M here: the
module will be called i2o_pci.
config I2O_BLOCK
tristate "I2O Block OSM"
......@@ -46,10 +41,8 @@ config I2O_BLOCK
Include support for the I2O Block OSM. The Block OSM presents disk
and other structured block devices to the operating system.
This support is also available as a module called i2o_block ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this support as a module, choose M here: the
module will be called i2o_block.
config I2O_SCSI
tristate "I2O SCSI OSM"
......@@ -59,10 +52,8 @@ config I2O_SCSI
I2O controller. You can use both the SCSI and Block OSM together if
you wish.
This support is also available as a module called i2o_scsi ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this support as a module, choose M here: the
module will be called i2o_scsi.
config I2O_PROC
tristate "I2O /proc support"
......@@ -72,10 +63,8 @@ config I2O_PROC
able to read I2O related information from the virtual directory
/proc/i2o.
This support is also available as a module called i2o_proc ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this support as a module, choose M here: the
module will be called i2o_proc.
endmenu
drivers/net/Kconfig
View file @ 77215b89
......@@ -53,9 +53,7 @@ config DUMMY
Administrator's Guide, available from
<http://www.tldp.org/docs.html#guide>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called dummy. If you want to use more than one dummy
device at a time, you need to compile this driver as a module.
Instead of 'dummy', the devices will then be called 'dummy0',
......@@ -78,9 +76,7 @@ config BONDING
This is similar to the EQL driver, but it merges Ethernet segments
instead of serial lines.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called bonding.
config EQUALIZER
......@@ -100,11 +96,8 @@ config EQUALIZER
section 6.2 of the NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called eql. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module
will be called eql. If unsure, say N.
config TUN
tristate "Universal TUN/TAP device driver support"
......@@ -124,10 +117,8 @@ config TUN
Please read <file:Documentation/networking/tuntap.txt> for more
information.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tun. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called tun.
If you don't know what to use this for, you don't need it.
......@@ -149,10 +140,8 @@ config ETHERTAP
Ethernet device. Please read the file
<file:Documentation/networking/ethertap.txt> for more information.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ethertap. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called ethertap.
If you don't know what to use this for, you don't need it.
......@@ -231,10 +220,8 @@ config MACE
motherboard will usually use a MACE (Medium Access Control for
Ethernet) interface. Say Y to include support for the MACE chip.
This driver is also available as a module called mace ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called mace.
config MACE_AAUI_PORT
bool "Use AAUI port instead of TP by default"
......@@ -254,10 +241,8 @@ config BMAC
Say Y for support of BMAC Ethernet interfaces. These are used on G3
computers.
This driver is also available as a module called bmac ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called bmac.
config OAKNET
tristate "National DP83902AV (Oak ethernet) support"
......@@ -265,10 +250,8 @@ config OAKNET
help
Say Y if your machine has this type of Ethernet network card.
This driver is also available as a module called oaknet ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called oaknet.
config ARIADNE
tristate "Ariadne support"
......@@ -277,10 +260,8 @@ config ARIADNE
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called ariadne. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called ariadne.
config A2065
tristate "A2065 support"
......@@ -289,10 +270,8 @@ config A2065
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called a2065. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called a2065.
config HYDRA
tristate "Hydra support"
......@@ -300,10 +279,8 @@ config HYDRA
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called hydra. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called hydra.
config ZORRO8390
tristate "Zorro NS8390-based Ethernet support"
......@@ -314,10 +291,8 @@ config ZORRO8390
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called zorro8390. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called zorro8390.
config APNE
tristate "PCMCIA NE2000 support"
......@@ -326,10 +301,8 @@ config APNE
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called apne. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called apne.
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
......@@ -358,9 +331,7 @@ config MAC89x0
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. This module will
be called mac89x0.
......@@ -374,9 +345,7 @@ config MACSONIC
one of these say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. This module will
be called macsonic.
......@@ -395,8 +364,8 @@ config MVME147_NET
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config MVME16x_NET
tristate "MVME16x Ethernet support"
......@@ -404,8 +373,8 @@ config MVME16x_NET
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
driver for this chip in your kernel.
To compile this driver as a module, choose M here.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
......@@ -413,8 +382,8 @@ config BVME6000_NET
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>.
in your kernel.
To compile this driver as a module, choose M here.
config ATARILANCE
tristate "Atari Lance support"
......@@ -532,10 +501,8 @@ config SUNLANCE
cards are based on the AMD Lance chipset, which is better known
via the NE2100 cards.
This support is also available as a module called sunlance ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called sunlance.
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
......@@ -546,10 +513,8 @@ config HAPPYMEAL
both PCI and Sbus devices. This driver also supports the "qfe" quad
100baseT device available in both PCI and Sbus configurations.
This support is also available as a module called sunhme ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called sunhme.
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
......@@ -558,10 +523,8 @@ config SUNBMAC
This driver supports the "be" interface available as an Sbus option.
This is Sun's older 100baseT Ethernet device.
This support is also available as a module called sunbmac ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called sunbmac.
config SUNQE
tristate "Sun QuadEthernet support"
......@@ -571,10 +534,8 @@ config SUNQE
an Sbus option. Note that this is not the same as Quad FastEthernet
"qfe" which is supported by the Happy Meal driver instead.
This support is also available as a module called sunqe ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called sunqe.
config SUNGEM
tristate "Sun GEM support"
......@@ -607,11 +568,9 @@ config EL1
have problems. Some people suggest to ping ("man ping") a nearby
machine every minute ("man cron") when using this card.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 3c501. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c501.
config EL2
tristate "3c503 \"EtherLink II\" support"
......@@ -621,11 +580,9 @@ config EL2
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 3c503. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c503.
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
......@@ -636,11 +593,9 @@ config ELPLUS
this type, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called 3c505.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c505.
config EL16
tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
......@@ -650,11 +605,9 @@ config EL16
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 3c507. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c507.
config EL3
tristate "3c509/3c529 (MCA)/3c569B (98)/3c579 \"EtherLink III\" support"
......@@ -668,11 +621,9 @@ config EL3
setup disk to disable Plug & Play mode, and to select the default
media type.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called 3c509.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c509.
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
......@@ -682,11 +633,9 @@ config 3C515
network card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called 3c515.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c515.
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
......@@ -696,11 +645,9 @@ config ELMC
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 3c523. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c523.
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
......@@ -710,11 +657,9 @@ config ELMC_II
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 3c527. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called 3c527.
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
......@@ -735,9 +680,7 @@ config VORTEX
<file:Documentation/networking/vortex.txt> and in the comments at
the beginning of <file:drivers/net/3c59x.c>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this support as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>.
config TYPHOON
......@@ -754,11 +697,9 @@ config TYPHOON
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called typhoon.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called typhoon.
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
......@@ -769,10 +710,8 @@ config LANCE
<http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
of this type.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called lance.
To compile this driver as a module, choose M here: the module
will be called lance. This is recommended.
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
......@@ -795,11 +734,9 @@ config WD80x3
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called wd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called wd.
config ULTRAMCA
tristate "SMC Ultra MCA support"
......@@ -809,11 +746,9 @@ config ULTRAMCA
an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc-mca. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smc-mca.
config ULTRA
tristate "SMC Ultra support"
......@@ -830,11 +765,9 @@ config ULTRA
this but keep it in mind if you have such a SCSI card and have
problems.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc-ultra. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> as
well as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smc-ultra.
config ULTRA32
tristate "SMC Ultra32 EISA support"
......@@ -844,11 +777,9 @@ config ULTRA32
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc-ultra32. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt> as
well as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smc-ultra32.
config SMC9194
tristate "SMC 9194 support"
......@@ -861,11 +792,9 @@ config SMC9194
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc9194. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called smc9194.
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
......@@ -889,11 +818,9 @@ config NI5010
<http://www.tldp.org/docs.html#howto>. Note that this is still
experimental code.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ni5010. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ni5010.
config NI52
tristate "NI5210 support"
......@@ -903,11 +830,9 @@ config NI52
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ni52. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ni52.
config NI65
tristate "NI6510 support"
......@@ -917,11 +842,9 @@ config NI65
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ni65. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ni65.
source "drivers/net/tulip/Kconfig"
......@@ -933,12 +856,9 @@ config AT1700
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called at1700.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called at1700.
config DEPCA
tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
......@@ -949,12 +869,9 @@ config DEPCA
<http://www.tldp.org/docs.html#howto> as well as
<file:drivers/net/depca.c>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called
depca.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called depca.
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
......@@ -964,11 +881,9 @@ config HP100
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called hp100.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called hp100.
config NET_ISA
bool "Other ISA cards"
......@@ -995,11 +910,9 @@ config E2100
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called e2100. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called e2100.
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
......@@ -1011,11 +924,9 @@ config EWRK3
well as the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called ewrk3.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ewrk3.
config EEXPRESS
tristate "EtherExpress 16 support"
......@@ -1028,11 +939,9 @@ config EEXPRESS
because the driver was very unreliable. We now have a new driver
that should do better.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called eexpress.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called eexpress.
config EEXPRESS_PRO
tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
......@@ -1044,11 +953,9 @@ config EEXPRESS_PRO
driver. Please read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called eepro. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called eepro.
config FMV18X
tristate "FMV-181/182/183/184 support (OBSOLETE)"
......@@ -1061,11 +968,9 @@ config FMV18X
If you use an FMV-183 or FMV-184 and it is not working, you may need
to disable Plug & Play mode of the card.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called fmv18x. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called fmv18x.
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
......@@ -1075,11 +980,9 @@ config HPLAN_PLUS
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called hp-plus. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called hp-plus.
config HPLAN
tristate "HP PCLAN (27245 and other 27xxx series) support"
......@@ -1089,11 +992,9 @@ config HPLAN
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called hp. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called hp.
config LP486E
tristate "LP486E on board Ethernet"
......@@ -1111,11 +1012,9 @@ config ETH16I
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called eth16i. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called eth16i.
config NE2000
tristate "NE2000/NE1000 support"
......@@ -1132,11 +1031,9 @@ config NE2000
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ne. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ne.
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
......@@ -1156,11 +1053,9 @@ config SEEQ8005
is for you, read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called seeq8005.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called seeq8005.
config SK_G16
tristate "SK_G16 support (OBSOLETE)"
......@@ -1230,11 +1125,9 @@ config SKMC
of different type hasn't been tested with this driver. Say Y if you
have one of these Ethernet adapters.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called sk_mca. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called sk_mca.
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
......@@ -1244,11 +1137,9 @@ config NE2_MCA
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ne2. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ne2.
config IBMLANA
tristate "IBM LAN Adapter/A support"
......@@ -1256,10 +1147,10 @@ config IBMLANA
---help---
This is a Micro Channel Ethernet adapter. You need to set
CONFIG_MCA to use this driver. It is both available as an in-kernel
driver and as a module ( = code which can be inserted in and removed
from the running kernel whenever you want). If you want to compile
it as a module, say M here and read <file:Documentation/modules.txt>
as well as <file:Documentation/networking/net-modules.txt>. The only
driver and as a module.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The only
currently supported card is the IBM LAN Adapter/A for Ethernet. It
will both support 16K and 32K memory windows, however a 32K window
gives a better security against packet losses. Usage of multiple
......@@ -1288,11 +1179,9 @@ config PCNET32
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pcnet32. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called pcnet32.
config AMD8111_ETH
tristate "AMD 8111 (new PCI lance) support"
......@@ -1302,11 +1191,9 @@ config AMD8111_ETH
answer Y here and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called amd8111e. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called amd8111e.
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
......@@ -1317,10 +1204,8 @@ config ADAPTEC_STARFIRE
Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
driver.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called starfire.
To compile this driver as a module, choose M here: the module
will be called starfire. This is recommended.
config ADAPTEC_STARFIRE_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
......@@ -1342,11 +1227,9 @@ config AC3200
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ac3200. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ac3200.
config APRICOT
tristate "Apricot Xen-II on board Ethernet"
......@@ -1356,9 +1239,7 @@ config APRICOT
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will be
called apricot.
......@@ -1370,9 +1251,7 @@ config B44
read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will be
called b44.
......@@ -1386,9 +1265,7 @@ config CS89x0
<http://www.tldp.org/docs.html#howto> as well as
<file:Documentation/networking/cs89x0.txt>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will be
called cs89x.
......@@ -1407,11 +1284,9 @@ config DGRS
<http://www.tldp.org/docs.html#howto>. More specific
information is contained in <file:Documentation/networking/dgrs.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dgrs. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called dgrs.
config EEPRO100
tristate "EtherExpressPro/100 support (eepro100, original Becker driver)"
......@@ -1421,11 +1296,9 @@ config EEPRO100
card, say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called eepro100. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> as
well as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called eepro100.
config EEPRO100_PIO
......@@ -1509,11 +1382,9 @@ config E100
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called e100. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called e100.
config LNE390
tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
......@@ -1523,11 +1394,9 @@ config LNE390
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called lne390. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called lne390.
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
......@@ -1562,11 +1431,9 @@ config NE2K_PCI
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ne2k-pci. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> as
well as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ne2k-pci.
config NE3210
tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
......@@ -1577,11 +1444,9 @@ config NE3210
<http://www.tldp.org/docs.html#howto>. Note that this driver
will NOT WORK for NE3200 cards as they are completely different.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ne3210. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ne3210.
config ES3210
tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
......@@ -1591,11 +1456,9 @@ config ES3210
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called es3210. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called es3210.
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
......@@ -1606,10 +1469,8 @@ config 8139CP
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read Documentation/modules.txt. This is recommended.
The module will be called 8139cp.
To compile this driver as a module, choose M here: the module
will be called 8139cp. This is recommended.
config 8139TOO
tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
......@@ -1621,10 +1482,8 @@ config 8139TOO
Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called 8139too.
To compile this driver as a module, choose M here: the module
will be called 8139too. This is recommended.
config 8139TOO_PIO
bool "Use PIO instead of MMIO"
......@@ -1680,10 +1539,8 @@ config SIS900
This driver also supports AMD 79C901 HomePNA so that you can use
your phone line as a network cable.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called sis900.
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
config EPIC100
tristate "SMC EtherPower II"
......@@ -1725,11 +1582,9 @@ config TLAN
Compaq NetFlex and Olicom cards. Please read the file
<file:Documentation/networking/tlan.txt> for more details.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tlan. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called tlan.
Please email feedback to torben.mathiasen@compaq.com.
......@@ -1740,11 +1595,9 @@ config VIA_RHINE
If you have a VIA "rhine" based network card (Rhine-I (3043) or
Rhine-2 (VT86c100A)), say Y here.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called via-rhine. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> as
well as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called via-rhine.
config VIA_RHINE_MMIO
bool "Use MMIO instead of PIO (EXPERIMENTAL)"
......@@ -1802,10 +1655,8 @@ config ATP
said N to the "Parallel printer support", because the two drivers
don't like each other.
If you want to compile this driver as a module however ( = code
which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called atp.
To compile this driver as a module, choose M here: the module
will be called atp.
config DE600
tristate "D-Link DE600 pocket adapter support"
......@@ -1819,11 +1670,8 @@ config DE600
port and it is safe to compile the corresponding drivers into the
kernel.
If you want to compile this driver as a module however ( = code
which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>.
The module will be called de600.
To compile this driver as a module, choose M here: the module
will be called de600.
config DE620
tristate "D-Link DE620 pocket adapter support"
......@@ -1837,11 +1685,8 @@ config DE620
port and it is safe to compile the corresponding drivers into the
kernel.
If you want to compile this driver as a module however ( = code
which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>.
The module will be called de620.
To compile this driver as a module, choose M here: the module
will be called de620.
config SGISEEQ
tristate "SGI Seeq ethernet controller support"
......@@ -1900,10 +1745,8 @@ config ACENIC
as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
line.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called acenic.
To compile this driver as a module, choose M here: the
module will be called acenic.
config ACENIC_OMIT_TIGON_I
bool "Omit support for old Tigon I based AceNICs"
......@@ -1927,10 +1770,8 @@ config DL2K
D-Link DGE-550T Gigabit Ethernet Adapter.
D-Link DL2000-based Gigabit Ethernet Adapter.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called dl2k.
To compile this driver as a module, choose M here: the
module will be called dl2k.
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
......@@ -1971,11 +1812,9 @@ config E1000
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called e1000. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called e1000.
config E1000_NAPI
bool "Use Rx Polling (NAPI)"
......@@ -1987,10 +1826,8 @@ config MYRI_SBUS
help
This driver supports MyriCOM Sbus gigabit Ethernet cards.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called myri_sbus.
To compile this driver as a module, choose M here: the module
will be called myri_sbus. This is recommended.
config NS83820
tristate "National Semiconduct DP83820 support"
......@@ -2010,9 +1847,7 @@ config HAMACHI
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will be
called hamachi.
......@@ -2026,10 +1861,8 @@ config YELLOWFIN
<http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
information about this driver in particular and Beowulf in general.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called yellowfin.
To compile this driver as a module, choose M here: the module
will be called yellowfin. This is recommended.
config R8169
tristate "Realtek 8169 gigabit ethernet support"
......@@ -2037,10 +1870,8 @@ config R8169
---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called r8169.
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
config SIS190
tristate "SiS190 gigabit ethernet support (EXPERIMENTAL)"
......@@ -2048,10 +1879,8 @@ config SIS190
---help---
Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called sis190.
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.
config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
......@@ -2112,12 +1941,10 @@ config SK98LIN
optional driver parameters.
Questions concerning this driver may be addressed to:
linux@syskonnect.de
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read Documentation/modules.txt. This is recommended.
The module will be called sk98lin.o.
To compile this driver as a module, choose M here: the module
will be called sk98lin. This is recommended.
config CONFIG_SK98LIN_T1
bool "3Com 3C940/3C941 Gigabit Ethernet Adapter"
depends on SK98LIN
......@@ -2259,10 +2086,8 @@ config TIGON3
help
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called tg3.
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
endmenu
......@@ -2297,11 +2122,9 @@ config IXGB
More specific information on configuring the driver is in
<file:Documentation/networking/ixgb.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ixgb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
will be called ixgb.
config IXGB_NAPI
bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
......@@ -2360,10 +2183,8 @@ config SKFP
Questions concerning this driver can be addressed to:
linux@syskonnect.de
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called skfp.
To compile this driver as a module, choose M here: the module
will be called skfp. This is recommended.
config HIPPI
bool "HIPPI driver support (EXPERIMENTAL)"
......@@ -2384,11 +2205,8 @@ config ROADRUNNER
help
Say Y here if this is your PCI HIPPI network card.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rrunner. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module
will be called rrunner. If unsure, say N.
config ROADRUNNER_LARGE_RINGS
bool "Use large TX/RX rings (EXPERIMENTAL)"
......@@ -2431,9 +2249,7 @@ config PLIP
with the PLIP support in Linux versions 1.0.x. This option enlarges
your kernel by about 8 KB.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will be
called plip. If unsure, say Y or M, in case you buy a laptop
later.
......@@ -2463,14 +2279,11 @@ config PPP
synchronous lines, you should say Y (or M) here and to "Support
synchronous PPP", below.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you said Y to "Version information on all symbols" above, then
you cannot compile the PPP driver into the kernel; you can then only
compile it as a module. The module will be called ppp_generic.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>.
compile it as a module. To compile this driver as a module, choose M
here and read <file:Documentation/networking/net-modules.txt>.
The module will be called ppp_generic.
config PPP_MULTILINK
bool "PPP multilink support (EXPERIMENTAL)"
......@@ -2507,9 +2320,7 @@ config PPP_ASYNC
a modem (not a synchronous or ISDN modem) to contact your ISP, you
need this option.
This code is also available as a module (code which can be inserted
into and removed from the running kernel). If you want to compile
it as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
If unsure, say Y.
......@@ -2521,10 +2332,7 @@ config PPP_SYNC_TTY
(HDLC) tty devices, such as the SyncLink adapter. These devices
are often used for high-speed leased lines like T1/E1.
This code is also available as a module (code which can be inserted
into and removed from the running kernel). If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config PPP_DEFLATE
tristate "PPP Deflate compression"
......@@ -2537,10 +2345,7 @@ config PPP_DEFLATE
Deflate compression method as well for this to be useful. Even if
they don't support it, it is safe to say Y here.
This code is also available as a module (code which can be inserted
into and removed from the running kernel). If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here.
config PPP_BSDCOMP
tristate "PPP BSD-Compress compression"
......@@ -2610,9 +2415,7 @@ config SLIP
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
support will enlarge your kernel by about 4 KB. If unsure, say N.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will be
called slip.
......@@ -2674,10 +2477,8 @@ config IPHASE5526
help
Say Y here if you have a Fibre Channel adaptor of this kind.
The driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called iph5526. For general information about
modules read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called iph5526.
config RCPCI
tristate "Red Creek Hardware VPN (EXPERIMENTAL)"
......@@ -2686,10 +2487,8 @@ config RCPCI
This is a driver for hardware which provides a Virtual Private
Network (VPN). Say Y if you have it.
This code is also available as a module called rcpci ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called rcpci.
config SHAPER
tristate "Traffic Shaper (EXPERIMENTAL)"
......@@ -2709,11 +2508,8 @@ config SHAPER
program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
shaper package.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called shaper. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module
will be called shaper. If unsure, say N.
source "drivers/net/wan/Kconfig"
......
drivers/net/appletalk/Kconfig
View file @ 77215b89
......@@ -65,10 +65,8 @@ config IPDDP
decapsulation, but not both. With the following two questions, you
decide which one you want.
If you say M here, the AppleTalk-IP support will be compiled as a
module ( = code which can be inserted in and removed from the
running kernel whenever you want, read
<file:Documentation/modules.txt>). The module is called ipddp.
To compile the AppleTalk-IP support as a module, choose M here: the
module will be called ipddp.
In this case, you will be able to use both encapsulation and
decapsulation simultaneously, by loading two copies of the module
and specifying different values for the module option ipddp_mode.
......
drivers/net/hamradio/Kconfig
View file @ 77215b89
......@@ -12,9 +12,7 @@ config MKISS
the advantage that it is already supported by most modern TNCs
without the need for a firmware upgrade.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called mkiss.
config 6PACK
......@@ -32,9 +30,7 @@ config 6PACK
problems. For details about the features and the usage of the
driver, read <file:Documentation/networking/6pack.txt>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called 6pack.
config BPQETHER
......@@ -91,9 +87,7 @@ config SCC
<http://www.tldp.org/docs.html#howto>. Also make sure to say Y
to "Amateur Radio AX.25 Level 2" support.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called scc.
config SCC_DELAY
......@@ -129,10 +123,8 @@ config BAYCOM_SER_FDX
information on the modems, see <http://www.baycom.de/> and
<file:Documentation/networking/baycom.txt>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called baycom_ser_fdx.
To compile this driver as a module, choose M here: the module
will be called baycom_ser_fdx. This is recommended.
config BAYCOM_SER_HDX
tristate "BAYCOM ser12 halfduplex driver for AX.25"
......@@ -148,10 +140,8 @@ config BAYCOM_SER_HDX
<http://www.baycom.de/> and
<file:Documentation/networking/baycom.txt>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called baycom_ser_hdx.
To compile this driver as a module, choose M here: the module
will be called baycom_ser_hdx. This is recommended.
config BAYCOM_PAR
tristate "BAYCOM picpar and par96 driver for AX.25"
......@@ -164,10 +154,8 @@ config BAYCOM_PAR
the modems, see <http://www.baycom.de/> and the file
<file:Documentation/networking/baycom.txt>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called baycom_par.
To compile this driver as a module, choose M here: the module
will be called baycom_par. This is recommended.
config BAYCOM_EPP
tristate "BAYCOM epp driver for AX.25"
......@@ -180,10 +168,8 @@ config BAYCOM_EPP
modems, see <http://www.baycom.de/> and the file
<file:Documentation/networking/baycom.txt>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called baycom_par.
To compile this driver as a module, choose M here: the module
will be called baycom_epp. This is recommended.
config YAM
tristate "YAM driver for AX.25"
......@@ -193,7 +179,6 @@ config YAM
port and includes some of the functions of a Terminal Node
Controller. If you have one of those, say Y here.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called yam.
drivers/net/irda/Kconfig
View file @ 77215b89
......@@ -9,12 +9,12 @@ config IRTTY_SIR
depends on IRDA
help
Say Y here if you want to build support for the IrTTY line
discipline. If you want to compile it as a module (irtty-sir), say M
here and read <file:Documentation/modules.txt>. IrTTY makes it
possible to use Linux's own serial driver for all IrDA ports that
are 16550 compatible. Most IrDA chips are 16550 compatible so you
should probably say Y to this option. Using IrTTY will however
limit the speed of the connection to 115200 bps (IrDA SIR mode).
discipline. To compile it as a module, choose M here: the module
will be called irtty-sir. IrTTY makes it possible to use Linux's
own serial driver for all IrDA ports that are 16550 compatible.
Most IrDA chips are 16550 compatible so you should probably say Y
to this option. Using IrTTY will however limit the speed of the
connection to 115200 bps (IrDA SIR mode).
If unsure, say Y.
......@@ -37,22 +37,21 @@ config ESI_DONGLE
depends on DONGLE && IRDA
help
Say Y here if you want to build support for the Extended Systems
JetEye PC dongle. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>. The ESI dongle attaches
to the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for ESI dongles you will have to
start irattach like this: "irattach -d esi".
JetEye PC dongle. To compile it as a module, choose M here. The ESI
dongle attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for ESI
dongles you will have to start irattach like this:
"irattach -d esi".
config ACTISYS_DONGLE
tristate "ACTiSYS IR-220L and IR220L+ dongle"
depends on DONGLE && IRDA
help
Say Y here if you want to build support for the ACTiSYS IR-220L and
IR220L+ dongles. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>. The ACTiSYS dongles
attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for ACTiSYS
dongles you will have to start irattach like this:
IR220L+ dongles. To compile it as a module, choose M here. The
ACTiSYS dongles attaches to the normal 9-pin serial port connector,
and can currently only be used by IrTTY. To activate support for
ACTiSYS dongles you will have to start irattach like this:
"irattach -d actisys" or "irattach -d actisys+".
config TEKRAM_DONGLE
......@@ -60,11 +59,11 @@ config TEKRAM_DONGLE
depends on DONGLE && IRDA
help
Say Y here if you want to build support for the Tekram IrMate 210B
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The Tekram dongle attaches to the
normal 9-pin serial port connector, and can currently only be used
by IrTTY. To activate support for Tekram dongles you will have to
start irattach like this: "irattach -d tekram".
dongle. To compile it as a module, choose M here. The Tekram dongle
attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for Tekram
dongles you will have to start irattach like this:
"irattach -d tekram".
comment "Old SIR device drivers"
......@@ -73,15 +72,14 @@ config IRPORT_SIR
depends on IRDA
---help---
Say Y here if you want to build support for the IrPORT IrDA device
driver. If you want to compile it as a module (irport), say M here
and read <file:Documentation/modules.txt>. IrPORT can be used
instead of IrTTY and sometimes this can be better. One example is
if your IrDA port does not have echo-canceling, which will work OK
with IrPORT since this driver is working in half-duplex mode only.
You don't need to use irattach with IrPORT, but you just insert it
the same way as FIR drivers (insmod irport io=0x3e8 irq=11). Notice
that IrPORT is a SIR device driver which means that speed is limited
to 115200 bps.
driver. To compile it as a module, choose M here: the module will be
called irport. IrPORT can be used instead of IrTTY and sometimes
this can be better. One example is if your IrDA port does not
have echo-canceling, which will work OK with IrPORT since this
driver is working in half-duplex mode only. You don't need to use
irattach with IrPORT, but you just insert it the same way as FIR
drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a
SIR device driver which means that speed is limited to 115200 bps.
If unsure, say Y.
......@@ -104,22 +102,21 @@ config ESI_DONGLE_OLD
depends on DONGLE_OLD && IRDA
help
Say Y here if you want to build support for the Extended Systems
JetEye PC dongle. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>. The ESI dongle attaches
to the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for ESI dongles you will have to
start irattach like this: "irattach -d esi".
JetEye PC dongle. To compile it as a module, choose M here. The ESI
dongle attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for ESI
dongles you will have to start irattach like this:
"irattach -d esi".
config ACTISYS_DONGLE_OLD
tristate "ACTiSYS IR-220L and IR220L+ dongle"
depends on DONGLE_OLD && IRDA
help
Say Y here if you want to build support for the ACTiSYS IR-220L and
IR220L+ dongles. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>. The ACTiSYS dongles
attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for ACTiSYS
dongles you will have to start irattach like this:
IR220L+ dongles. To compile it as a module, choose M here. The
ACTiSYS dongles attaches to the normal 9-pin serial port connector,
and can currently only be used by IrTTY. To activate support for
ACTiSYS dongles you will have to start irattach like this:
"irattach -d actisys" or "irattach -d actisys+".
config TEKRAM_DONGLE_OLD
......@@ -127,44 +124,44 @@ config TEKRAM_DONGLE_OLD
depends on DONGLE_OLD && IRDA
help
Say Y here if you want to build support for the Tekram IrMate 210B
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The Tekram dongle attaches to the
normal 9-pin serial port connector, and can currently only be used
by IrTTY. To activate support for Tekram dongles you will have to
start irattach like this: "irattach -d tekram".
dongle. To compile it as a module, choose M here. The Tekram dongle
attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for Tekram
dongles you will have to start irattach like this:
"irattach -d tekram".
config GIRBIL_DONGLE
tristate "Greenwich GIrBIL dongle"
depends on DONGLE_OLD && IRDA
help
Say Y here if you want to build support for the Greenwich GIrBIL
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The Greenwich dongle attaches to
the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for Greenwich dongles you will
have to insert "irattach -d girbil" in the /etc/irda/drivers script.
dongle. To compile it as a module, choose M here. The Greenwich
dongle attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for Greenwich
dongles you will have to insert "irattach -d girbil" in the
/etc/irda/drivers script.
config LITELINK_DONGLE
tristate "Parallax LiteLink dongle"
depends on DONGLE_OLD && IRDA
help
Say Y here if you want to build support for the Parallax Litelink
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The Parallax dongle attaches to
the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for Parallax dongles you will
have to start irattach like this "irattach -d litelink".
dongle. To compile it as a module, choose M here. The Parallax
dongle attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for Parallax
dongles you will have to start irattach like this:
"irattach -d litelink".
config MCP2120_DONGLE
tristate "Microchip MCP2120"
depends on DONGLE_OLD && IRDA
help
Say Y here if you want to build support for the Microchip MCP2120
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The MCP2120 dongle attaches to
the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for MCP2120 dongles you will
have to insert "irattach -d mcp2120" in the /etc/irda/drivers script.
dongle. To compile it as a module, choose M here. The MCP2120 dongle
attaches to the normal 9-pin serial port connector, and can
currently only be used by IrTTY. To activate support for MCP2120
dongles you will have to insert "irattach -d mcp2120" in the
/etc/irda/drivers script.
You must build this dongle yourself. For more information see:
<http://www.eyetap.org/~tangf/irda_sir_linux.html>
......@@ -174,10 +171,9 @@ config OLD_BELKIN_DONGLE
depends on DONGLE_OLD && IRDA
help
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>. The module will be
called old_belkin. Some information is contained in the comments
at the top of <file:drivers/net/irda/old_belkin.c>.
and 2000 dongles. To compile it as a module, choose M here: the module
will be called old_belkin. Some information is contained in the
comments at the top of <file:drivers/net/irda/old_belkin.c>.
config EP7211_IR
tristate "EP7211 I/R support"
......@@ -188,25 +184,24 @@ config ACT200L_DONGLE
depends on DONGLE_OLD && EXPERIMENTAL && IRDA
help
Say Y here if you want to build support for the ACTiSYS IR-200L
dongle. If you want to compile it as a module, say M here and read
Documentation/modules.txt. The ACTiSYS IR-200L dongle attaches to
the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for ACTiSYS IR-200L dongles
you will have to start irattach like this: "irattach -d act200l".
dongle. To compile it as a module, choose M here. The ACTiSYS
IR-200L dongle attaches to the normal 9-pin serial port connector,
and can currently only be used by IrTTY. To activate support for
ACTiSYS IR-200L dongles you will have to start irattach like this:
"irattach -d act200l".
config MA600_DONGLE
tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
depends on DONGLE_OLD && EXPERIMENTAL && IRDA
---help---
Say Y here if you want to build support for the Mobile Action MA600
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The MA600 dongle attaches to
the normal 9-pin serial port connector, and can currently only be
tested on IrCOMM. To activate support for MA600 dongles you will
have to insert "irattach -d ma600" in the /etc/irda/drivers script.
Note: irutils 0.9.15 requires no modification. irutils 0.9.9 needs
modification. For more information, download the following tar gzip
file.
dongle. To compile it as a module, choose M here. The MA600 dongle
attaches to the normal 9-pin serial port connector, and can
currently only be tested on IrCOMM. To activate support for MA600
dongles you will have to insert "irattach -d ma600" in the
/etc/irda/drivers script. Note: irutils 0.9.15 requires no
modification. irutils 0.9.9 needs modification. For more
information, download the following tar gzip file.
There is a pre-compiled module on
<http://engsvr.ust.hk/~eetwl95/download/ma600-2.4.x.tar.gz>
......@@ -218,13 +213,12 @@ config USB_IRDA
depends on IRDA && USB
---help---
Say Y here if you want to build support for the USB IrDA FIR Dongle
device driver. If you want to compile it as a module (irda-usb),
say M here and read <file:Documentation/modules.txt>. IrDA-USB
support the various IrDA USB dongles available and most of their
pecularities. Those dongles plug in the USB port of your computer,
are plug and play, and support SIR and FIR (4Mbps) speeds. On the
other hand, those dongles tend to be less efficient than a FIR
chipset.
device driver. To compile it as a module, choose M here: the module
will be called irda-usb. IrDA-USB support the various IrDA USB
dongles available and most of their pecularities. Those dongles
plug in the USB port of your computer, are plug and play, and
support SIR and FIR (4Mbps) speeds. On the other hand, those
dongles tend to be less efficient than a FIR chipset.
Please note that the driver is still experimental. And of course,
you will need both USB and IrDA support in your kernel...
......@@ -237,8 +231,7 @@ config NSC_FIR
PC87338 IrDA chipsets. This driver supports SIR,
MIR and FIR (4Mbps) speeds.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
To compile it as a module, choose M here: the module will be called
nsc-ircc.
config WINBOND_FIR
......@@ -250,8 +243,7 @@ config WINBOND_FIR
chipset in the Corel NetWinder. The driver supports SIR, MIR and
FIR (4Mbps) speeds.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
To compile it as a module, choose M here: the module will be called
w83977af_ir.
config TOSHIBA_OLD
......@@ -262,9 +254,8 @@ config TOSHIBA_OLD
chipset. This chipset is used by the Toshiba Libretto 100CT, and
many more laptops. This driver is obsolete, will no more be
maintained and will be removed in favor of the new driver.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called toshoboe.
To compile it as a module, choose M here: the module will be called
toshoboe.
config TOSHIBA_FIR
tristate "Toshiba Type-O IR Port"
......@@ -273,9 +264,8 @@ config TOSHIBA_FIR
Say Y here if you want to build support for the Toshiba Type-O IR
and Donau oboe chipsets. These chipsets are used by the Toshiba
Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called donauboe.
To compile it as a module, choose M here: the module will be called
donauboe.
config AU1000_FIR
tristate "Alchemy Au1000 SIR/FIR"
......@@ -289,9 +279,8 @@ config SMC_IRCC_OLD
Communications Controller. It is used in the Fujitsu Lifebook 635t
and Sony PCG-505TX. This driver is obsolete, will no more be
maintained and will be removed in favor of the new driver.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be
called smc-ircc.
To compile it as a module, choose M here: the module will be called
smc-ircc.
config SMC_IRCC_FIR
tristate "SMSC IrCC (EXPERIMENTAL)"
......@@ -300,9 +289,8 @@ config SMC_IRCC_FIR
Say Y here if you want to build support for the SMC Infrared
Communications Controller. It is used in a wide variety of
laptops (Fujitsu, Sony, Compaq and some Toshiba).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be
called smsc-ircc2.o.
To compile it as a module, choose M here: the module will be called
smsc-ircc2.o.
config ALI_FIR
tristate "ALi M5123 FIR (EXPERIMENTAL)"
......@@ -313,8 +301,7 @@ config ALI_FIR
M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
SIR, MIR and FIR (4Mbps) speeds.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
To compile it as a module, choose M here: the module will be called
ali-ircc.
config VLSI_FIR
......@@ -326,8 +313,7 @@ config VLSI_FIR
and 5500 notebooks. The driver provides support for SIR, MIR and
FIR (4Mbps) speeds.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
To compile it as a module, choose M here: the module will be called
vlsi_ir.
config SA1100_FIR
......@@ -348,8 +334,7 @@ config VIA_FIR
You will need to specify the 'dongle_id' module parameter to
indicate the FIR dongle attached to the controller.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
To compile it as a module, choose M here: the module will be called
via-ircc.
endmenu
......
drivers/net/pcmcia/Kconfig
View file @ 77215b89
......@@ -28,11 +28,8 @@ config PCMCIA_3C589
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 3c589_cs. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module will be
called 3c589_cs. If unsure, say N.
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
......@@ -41,11 +38,8 @@ config PCMCIA_3C574
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called 3c574_cs. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module will be
called 3c574_cs. If unsure, say N.
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
......@@ -54,11 +48,8 @@ config PCMCIA_FMVJ18X
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
PCMCIA (PC-card) Ethernet card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called fmvj18x_cs. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called fmvj18x_cs. If unsure, say N.
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
......@@ -67,11 +58,8 @@ config PCMCIA_PCNET
Say Y here if you intend to attach an NE2000 compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pcnet_cs. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
......@@ -80,11 +68,8 @@ config PCMCIA_NMCLAN
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called nmclan_cs. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module will be
called nmclan_cs. If unsure, say N.
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
......@@ -93,11 +78,8 @@ config PCMCIA_SMC91C92
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
(PC-card) Ethernet or Fast Ethernet card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91c92_cs. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called smc91c92_cs. If unsure, say N.
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
......@@ -106,11 +88,8 @@ config PCMCIA_XIRC2PS
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called xirc2ps_cs. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called xirc2ps_cs. If unsure, say N.
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
......@@ -121,11 +100,8 @@ config PCMCIA_AXNET
nearly NE2000 compatible but need a separate driver due to a few
misfeatures.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called axnet_cs. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module will be
called axnet_cs. If unsure, say N.
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
......@@ -134,11 +110,8 @@ config ARCNET_COM20020_CS
Say Y here if you intend to attach this type of ARCnet PCMCIA card
to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called com20020_cs. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called com20020_cs. If unsure, say N.
config PCMCIA_IBMTR
tristate "IBM PCMCIA tokenring adapter support"
......@@ -148,10 +121,8 @@ config PCMCIA_IBMTR
card to your computer. You then also need to say Y to "Token Ring
driver support".
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ibmtr_cs. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called ibmtr_cs.
endmenu
drivers/net/tokenring/Kconfig
View file @ 77215b89
......@@ -30,10 +30,8 @@ config IBMTR
Warning: this driver will almost definitely fail if more than one
active Token Ring card is present.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ibmtr. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called ibmtr.
config IBMOL
tristate "IBM Olympic chipset PCI adapter support"
......@@ -46,10 +44,8 @@ config IBMOL
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called olympic. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called olympic.
Also read <file:Documentation/networking/olympic.txt> or check the
Linux Token Ring Project site for the latest information at
......@@ -64,10 +60,8 @@ config IBMLS
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a modules ( = code which can be
inserted in and removed from the running kernel whenever you want).
The modules will be called lanstreamer. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called lanstreamer.
config 3C359
tristate "3Com 3C359 Token Link Velocity XL adapter support"
......@@ -80,10 +74,8 @@ config 3C359
If you have such an adapter, say Y and read the Token-Ring
mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will will be called 3c359. If you want to compile it
as a module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the module will be
called 3c359.
Also read the file <file:Documentation/networking/3c359.txt> or check the
Linux Token Ring Project site for the latest information at
......@@ -109,10 +101,8 @@ config TMS380TR
Also read the file <file:Documentation/networking/tms380tr.txt> or
check <http://www.auk.cx/tms380tr/>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tms380tr. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called tms380tr.
config TMSPCI
tristate "Generic TMS380 PCI support"
......@@ -126,10 +116,8 @@ config TMSPCI
- Thomas-Conrad TC4048 PCI 4/16
- 3Com Token Link Velocity
This driver is available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tmspci. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called tmspci.
config SKISA
tristate "SysKonnect TR4/16 ISA support"
......@@ -140,10 +128,8 @@ config SKISA
These cards are known to work:
- SysKonnect TR4/16 ISA (SK-4190)
This driver is available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called skisa. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called skisa.
config PROTEON
tristate "Proteon ISA support"
......@@ -155,10 +141,8 @@ config PROTEON
- Proteon 1392
- Proteon 1392 plus
This driver is available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called proteon. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called proteon.
config ABYSS
tristate "Madge Smart 16/4 PCI Mk2 support"
......@@ -167,10 +151,8 @@ config ABYSS
This tms380 module supports the Madge Smart 16/4 PCI Mk2
cards (51-02).
This driver is available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called abyss. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called abyss.
config MADGEMC
tristate "Madge Smart 16/4 Ringnode MicroChannel"
......@@ -179,10 +161,8 @@ config MADGEMC
This tms380 module supports the Madge Smart 16/4 MC16 and MC32
MicroChannel adapters.
This driver is available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called madgemc. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called madgemc.
config SMCTR
tristate "SMC ISA/MCA adapter support"
......@@ -197,10 +177,8 @@ config SMCTR
<http://www.tldp.org/docs.html#howto> and the file
<file:Documentation/networking/smctr.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smctr. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called smctr.
endmenu
drivers/net/wan/Kconfig
View file @ 77215b89
......@@ -52,10 +52,7 @@ config COSA
<file:drivers/net/wan/cosa.c> for details about the cards and the driver
itself.
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cosa. For general information about
modules read <file:Documentation/modules.txt>.
The driver will be compiled as a module: the module will be called cosa.
#
# COMX drivers
......@@ -76,8 +73,8 @@ config COMX
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this driver.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called comx.
To compile this driver as a module, choose M here: the
module will be called comx.
config COMX_HW_COMX
tristate "Support for COMX/CMX/HiCOMX boards"
......@@ -89,9 +86,8 @@ config COMX_HW_COMX
You will need additional firmware to use these cards, which are
downloadable from <ftp://ftp.itc.hu/>.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
comx-hw-comx.
To compile this driver as a module, choose M here: the
module will be called comx-hw-comx.
config COMX_HW_LOCOMX
tristate "Support for LoCOMX board"
......@@ -100,9 +96,8 @@ config COMX_HW_LOCOMX
Hardware driver for the 'LoCOMX' board from the MultiGate family.
Say Y if you have a board like this.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
comx-hw-locomx.
To compile this driver as a module, choose M here: the
module will be called comx-hw-locomx.
config COMX_HW_MIXCOM
tristate "Support for MixCOM board"
......@@ -118,9 +113,8 @@ config COMX_HW_MIXCOM
driver for the flash ROM of this card is available separately on
<ftp://ftp.itc.hu/>.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
comx-hw-mixcom.
To compile this driver as a module, choose M here: the
module will be called comx-hw-mixcom.
config COMX_HW_MUNICH
tristate "Support for MUNICH based boards: SliceCOM, PCICOM (WelCOM)"
......@@ -129,10 +123,8 @@ config COMX_HW_MUNICH
Hardware driver for the 'SliceCOM' (channelized E1) and 'PciCOM'
boards (X21) from the MultiGate family.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called comx-hw-munich. If you want to compile it
as a module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called comx-hw-munich.
Read linux/Documentation/networking/slicecom.txt for help on
configuring and using SliceCOM interfaces. Further info on these cards
......@@ -146,8 +138,7 @@ config COMX_PROTO_PPP
boards. Say Y if you want to use either protocol on your MultiGate
boards.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
To compile this as a module, choose M here: the module will be called
comx-proto-ppp.
config COMX_PROTO_LAPB
......@@ -157,8 +148,7 @@ config COMX_PROTO_LAPB
LAPB protocol driver for all MultiGate boards. Say Y if you
want to use this protocol on your MultiGate boards.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
To compile this as a module, choose M here: the module will be called
comx-proto-lapb.
config COMX_PROTO_FR
......@@ -168,8 +158,7 @@ config COMX_PROTO_FR
Frame Relay protocol driver for all MultiGate boards. Say Y if you
want to use this protocol on your MultiGate boards.
If you want to compile this as a module, say M and read
<file:Documentation/modules.txt>. The module will be called
To compile this as a module, choose M here: the module will be called
comx-proto-fr.
config DSCC4
......@@ -181,10 +170,8 @@ config DSCC4
ports card. Take a look at <http://www.cogenit.fr/dscc4/>
for further informations about the driver and his configuration.
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dscc4. For general information about
modules read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called dscc4.
config DSCC4_PCISYNC
bool "Etinc PCISYNC features"
......@@ -237,10 +224,8 @@ config LANMEDIA
To change setting such as syncPPP vs cisco HDLC or clock source you
will need lmcctl. It is available at <ftp://ftp.lanmedia.com/>.
This code is also available as a module called lmc ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called lmc.
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
......@@ -276,9 +261,7 @@ config HDLC
Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called hdlc.
If unsure, say N here.
......@@ -353,9 +336,7 @@ config PC300
option below this one and read the file README.mlppp provided by PC300
package.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read Documentation/modules.txt. The module will be
To compile this as a module, choose M here: the module will be
called pc300.
If you haven't heard about it, it's safe to say N.
......@@ -383,9 +364,7 @@ config N2
Note that N2csu and N2dds cards are not supported by this driver.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called n2.
If unsure, say N here.
......@@ -398,9 +377,7 @@ config C101
Technologies Co., Ltd. If you have such a card,
say Y here and see <http://hq.pm.waw.pl/pub/hdlc/>
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called c101.
If unsure, say N here.
......@@ -415,13 +392,11 @@ config FARSYNC
8Mb/s (128K on V.24) using synchronous PPP, Cisco HDLC, raw HDLC,
Frame Relay or X.25/LAPB.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
say M here and read <file:Documentation/modules.txt>.
The module will be called farsync and if you want the module to be
automatically loaded when the interface is referenced then you
should add "alias hdlcX farsync" to /etc/modules.conf for each
interface, where X is 0, 1, 2, ...
To compile this driver as a module, choose M here: the module will be
called farsync. If you want the module to be automatically loaded
when the interface is referenced then you should add
"alias hdlcX farsync" to /etc/modules.conf for each interface, where
X is 0, 1, 2, ...
config DLCI
tristate "Frame relay DLCI support"
......@@ -439,10 +414,8 @@ config DLCI
net-tools package as explained in
<file:Documentation/networking/framerelay.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dlci. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called dlci.
config DLCI_COUNT
int "Max open DLCI"
......@@ -472,10 +445,8 @@ config SDLA
only frame relay is supported by the driver at this time. Please
read <file:Documentation/framerelay.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sdla. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called sdla.
# Wan router core.
config WAN_ROUTER_DRIVERS
......@@ -522,10 +493,8 @@ config VENDOR_SANGOMA
<file:Documentation/networking/wanpipe.txt>. The next questions
will ask you about the protocols you want the driver to support.
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called wanpipe. For general information about
modules read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will
be called wanpipe.
config WANPIPE_CHDLC
bool "WANPIPE Cisco HDLC support"
......@@ -614,10 +583,8 @@ config CYCLADES_SYNC
additional details, I hope to have documentation available as soon
as possible. (Cyclades Brazil is writing the Documentation).
The driver will be compiled as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cyclomx. For general information about
modules read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module will be
called cyclomx.
config CYCLOMX_X25
bool "Cyclom 2X X.25 support (EXPERIMENTAL)"
......@@ -640,9 +607,7 @@ config LAPBETHER
need to say Y or M to the driver for your Ethernet card as well as
to "LAPB Data Link Driver".
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called lapbether. If unsure, say N.
config X25_ASY
......@@ -655,9 +620,7 @@ config X25_ASY
currently comply with the asynchronous HDLS framing protocols in
CCITT recommendation X.25.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called x25_asy. If unsure, say N.
config SBNI
......
drivers/net/wireless/Kconfig
View file @ 77215b89
......@@ -53,9 +53,7 @@ config STRIP
in saying Y to STRIP now, except that it makes the kernel a bit
bigger.
You can also compile this as a module ( = code which can be inserted
in and removed from the running kernel whenever you want), say M
here and read <file:Documentation/modules.txt>. The module will be
To compile this as a module, choose M here: the module will be
called strip.
config ARLAN
......@@ -97,11 +95,8 @@ config WAVELAN
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
Please read the man pages contained therein.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called wavelan. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
To compile this driver as a module, choose M here: the module will be
called wavelan.
config PCMCIA_WAVELAN
tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
......@@ -111,11 +106,8 @@ config PCMCIA_WAVELAN
(PC-card) wireless Ethernet networking card to your computer. This
driver is for the non-IEEE-802.11 Wavelan cards.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called wavelan_cs. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called wavelan_cs. If unsure, say N.
config PCMCIA_NETWAVE
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
......@@ -124,11 +116,8 @@ config PCMCIA_NETWAVE
Say Y here if you intend to attach this type of PCMCIA (PC-card)
wireless Ethernet networking card to your computer.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called netwave_cs. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
To compile this driver as a module, choose M here: the module will be
called netwave_cs. If unsure, say N.
comment "Wireless 802.11 Frequency Hopping cards support"
depends on NET_RADIO && PCMCIA
......@@ -142,11 +131,8 @@ config PCMCIA_RAYCS
Please read the file <file:Documentation/networking/ray_cs.txt> for
details.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ray_cs. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
comment "Wireless 802.11b ISA/PCI cards support"
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
......
drivers/parport/Kconfig
View file @ 77215b89
......@@ -24,13 +24,11 @@ config PARPORT
It is possible to share a single parallel port among several devices
and it is safe to compile all the corresponding drivers into the
kernel. If you want to compile parallel port support as a module
( = code which can be inserted in and removed from the running
kernel whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called
parport. If you have more than one parallel port and want to
specify which port and IRQ to be used by this driver at module load
time, take a look at <file:Documentation/parport.txt>.
kernel. To compile parallel port support as a module, choose M here:
the module will be called parport.
If you have more than one parallel port and want to specify which
port and IRQ to be used by this driver at module load time, take a
look at <file:Documentation/parport.txt>.
If unsure, say Y.
......@@ -43,11 +41,8 @@ config PARPORT_PC
parallel ports. PA-RISC owners should only say Y here if they
have a SuperIO parallel port.
This code is also available as a module. If you want to compile it
as a module ( = code which can be inserted in and removed from the
running kernel whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called
parport_pc.
To compile this driver as a module, choose M here: the
module will be called parport_pc.
If unsure, say Y.
......
drivers/pci/hotplug/Kconfig
View file @ 77215b89
......@@ -14,10 +14,8 @@ config HOTPLUG_PCI
powered up and running. The file system pcihpfs must be mounted
in order to interact with any PCI Hotplug controllers.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pci_hotplug. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pci_hotplug.
When in doubt, say N.
......@@ -39,10 +37,8 @@ config HOTPLUG_PCI_FAKE
Use this module at your own risk. You have been warned!
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called fakephp. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called fakephp.
When in doubt, say N.
......@@ -53,10 +49,8 @@ config HOTPLUG_PCI_COMPAQ
Say Y here if you have a motherboard with a Compaq PCI Hotplug
controller.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cpqphp. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cpqphp.
When in doubt, say N.
......@@ -77,10 +71,8 @@ config HOTPLUG_PCI_IBM
Say Y here if you have a motherboard with a IBM PCI Hotplug
controller.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cpqphp. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ibmphp.
When in doubt, say N.
......@@ -91,10 +83,8 @@ config HOTPLUG_PCI_ACPI
Say Y here if you have a system that supports PCI Hotplug using
ACPI.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called acpiphp. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called acpiphp.
When in doubt, say N.
......@@ -114,10 +104,8 @@ config HOTPLUG_PCI_CPCI_ZT5550
Say Y here if you have an Performance Technologies (formerly Intel,
formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cpcihp_zt5550. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cpcihp_zt5550.
When in doubt, say N.
......@@ -129,10 +117,8 @@ config HOTPLUG_PCI_CPCI_GENERIC
hotswap signal as a bit in a system register that can be read through
standard port I/O.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cpcihp_generic. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cpcihp_generic.
When in doubt, say N.
......
drivers/pcmcia/Kconfig
View file @ 77215b89
......@@ -23,11 +23,8 @@ config PCMCIA
for location). Please also read the PCMCIA-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
When compiled this way, there will be modules called pcmcia_core
and ds. If you want to compile it as a module, say M here and
read <file:Documentation/modules.txt>.
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
config YENTA
tristate "CardBus yenta-compatible bridge support"
......
drivers/s390/Kconfig
View file @ 77215b89
......@@ -49,10 +49,8 @@ config BLK_DEV_LOOP
Note that this loop device has nothing to do with the loopback
device used for network connections from the machine to itself.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called loop.
To compile this driver as a module, choose M here: the
module will be called loop.
Most users will answer N here.
......@@ -78,10 +76,8 @@ config BLK_DEV_NBD
Note that this has nothing to do with the network file systems NFS
or Coda; you can say N here even if you intend to use NFS or Coda.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called nbd.
To compile this driver as a module, choose M here: the
module will be called nbd.
If unsure, say N.
......@@ -98,10 +94,8 @@ config BLK_DEV_RAM
Note that the kernel command line option "ramdisk=XX" is now
obsolete. For details, read <file:Documentation/ramdisk.txt>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M and read <file:Documentation/modules.txt>. The module will be
called rd.
To compile this driver as a module, choose M here: the
module will be called rd.
Most normal users won't need the RAM disk functionality, and can
thus say N here.
......
drivers/s390/net/Kconfig
View file @ 77215b89
......@@ -42,10 +42,8 @@ config QETH
For details please refer to the documentation provided by IBM at
<http://www10.software.ibm.com/developerworks/opensource/linux390>
This driver is also available as a module (code which can be
inserted in and removed from the running kernel whenever you
want). If you want to compile it as a module, say 'M' here and
read file Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called qeth.
comment "Gigabit Ethernet default settings"
......
drivers/sbus/char/Kconfig
View file @ 77215b89
......@@ -8,9 +8,10 @@ config SUN_OPENPROMIO
PROM device tree. The driver implements a SunOS-compatible
interface and a NetBSD-compatible interface.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M and read <file:Documentation/modules.txt>. If unsure, say Y.
To compile this driver as a module, choose M here: the
module will be called openprom.
If unsure, say Y.
config SUN_MOSTEK_RTC
tristate "Mostek real time clock support"
......
drivers/scsi/Kconfig
View file @ 77215b89
......@@ -14,13 +14,12 @@ config SCSI
version of the IOMEGA ZIP drive, USB storage devices, Fibre
Channel, FireWire storage and the IDE-SCSI emulation driver.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scsi_mod. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. However, do not compile this as a
module if your root file system (the one containing the directory /)
is located on a SCSI device.
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
The module will be called scsi_mod.
However, do not compile this as a module if your root file system
(the one containing the directory /) is located on a SCSI device.
config SCSI_PROC_FS
bool "legacy /proc/scsi/ support"
......@@ -47,14 +46,14 @@ config BLK_DEV_SD
<http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sd_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>. Do not compile this driver as a
module if your root file system (the one containing the directory /)
is located on a SCSI disk. In this case, do not compile the driver
for your SCSI host adapter (below) as a module either.
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
The module will be called sd_mod.
Do not compile this driver as a module if your root file system
(the one containing the directory /) is located on a SCSI disk.
In this case, do not compile the driver for your SCSI host adapter
(below) as a module either.
config CHR_DEV_ST
tristate "SCSI tape support"
......@@ -66,11 +65,8 @@ config CHR_DEV_ST
<file:Documentation/scsi/st.txt> in the kernel source. This is NOT
for SCSI CD-ROMs.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called st. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>. The module will be called st.
config CHR_DEV_OSST
tristate "SCSI OnStream SC-x0 tape support"
......@@ -91,11 +87,8 @@ config CHR_DEV_OSST
Please also have a look at the standard st docu, as most of it
applies to osst as well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called osst. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
<file:Documentation/scsi/scsi.txt>.
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>. The module will be called osst.
config BLK_DEV_SR
tristate "SCSI CDROM support"
......@@ -106,11 +99,9 @@ config BLK_DEV_SR
<http://www.tldp.org/docs.html#howto>. Also make sure to say
Y or M to "ISO 9660 CD-ROM file system support" later.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sr_mod. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> and
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>.
The module will be called sr_mod.
config BLK_DEV_SR_VENDOR
bool "Enable vendor-specific extensions (for SCSI CDROM)"
......@@ -141,10 +132,9 @@ config CHR_DEV_SG
driver software yourself. Please read the file
<file:Documentation/scsi/scsi-generic.txt> for more information.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> and
To compile this driver as a module, choose M here and read
<file:Documentation/scsi/scsi.txt>. The module will be called sg.
If unsure, say N.
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
......@@ -249,10 +239,8 @@ config SCSI_7000FASST
family. Some information is in the source:
<file:drivers/scsi/wd7000.c>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called wd7000. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called wd7000.
config SCSI_ACARD
tristate "ACARD SCSI support"
......@@ -260,10 +248,8 @@ config SCSI_ACARD
help
This driver supports the ACARD 870U/W SCSI host adapter.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called atp870u. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called atp870u.
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
......@@ -277,10 +263,8 @@ config SCSI_AHA152X
<http://www.tldp.org/docs.html#howto>. You might also want to
read the file <file:Documentation/scsi/aha152x.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called aha152x. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called aha152x.
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
......@@ -293,10 +277,8 @@ config SCSI_AHA1542
sold under the Adaptec name. If it doesn't work out of the box, you
may have to change some settings in <file:drivers/scsi/aha1542.h>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called aha1542.
To compile this driver as a module, choose M here: the
module will be called aha1542.
config SCSI_AHA1740
tristate "Adaptec AHA1740 support"
......@@ -308,10 +290,8 @@ config SCSI_AHA1740
of the box, you may have to change some settings in
<file:drivers/scsi/aha1740.h>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called aha1740. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called aha1740.
config SCSI_AACRAID
tristate "Adaptec AACRAID support (EXPERIMENTAL)"
......@@ -356,10 +336,8 @@ config SCSI_AIC7XXX_OLD
available from <http://www.tldp.org/docs.html#howto>, can also
be of great help.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called aic7xxx_old.
To compile this driver as a module, choose M here: the
module will be called aic7xxx_old.
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
......@@ -372,11 +350,8 @@ config SCSI_DPT_I2O
well as the DPT SmartRaid V cards. This is an Adaptec maintained
driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
dpt_i2o.
To compile this driver as a module, choose M here: the
module will be called dpt_i2o.
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
......@@ -386,11 +361,8 @@ config SCSI_ADVANSYS
AdvanSys. It is documented in the kernel source in
<file:drivers/scsi/advansys.c>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
advansys.
To compile this driver as a module, choose M here: the
module will be called advansys.
config SCSI_IN2000
tristate "Always IN2000 SCSI support"
......@@ -401,10 +373,8 @@ config SCSI_IN2000
out of the box, you may have to change the jumpers for IRQ or
address selection.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called in2000.
To compile this driver as a module, choose M here: the
module will be called in2000.
# does not use pci dma and seems to be onboard only for old machines
config SCSI_AM53C974
......@@ -420,10 +390,8 @@ config SCSI_AM53C974
"Tekram DC390(T) and Am53/79C974 (PCscsi) SCSI support", above. You
can pick either one.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called AM53C974.
To compile this driver as a module, choose M here: the
module will be called AM53C974.
config SCSI_MEGARAID
tristate "AMI MegaRAID support"
......@@ -432,10 +400,8 @@ config SCSI_MEGARAID
This driver supports the AMI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called megaraid.
To compile this driver as a module, choose M here: the
module will be called megaraid.
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
......@@ -449,11 +415,8 @@ config SCSI_BUSLOGIC
driver does not work correctly without modification, please contact
the author, Leonard N. Zubkoff, by email to lnz@dandelion.com.
You can also build this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
but only a single instance may be loaded. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called BusLogic.
To compile this driver as a module, choose M here: the
module will be called BusLogic.
config SCSI_OMIT_FLASHPOINT
bool "Omit FlashPoint support"
......@@ -477,10 +440,8 @@ config SCSI_DMX3191D
help
This is support for Domex DMX3191D SCSI Host Adapters.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dmx3191d. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called dmx3191d.
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
......@@ -491,10 +452,8 @@ config SCSI_DTC3280
<http://www.tldp.org/docs.html#howto>, and the file
<file:Documentation/scsi/dtc3x80.txt>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dtc. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called dtc.
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
......@@ -509,10 +468,8 @@ config SCSI_EATA
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called eata.
To compile this driver as a module, choose M here: the
module will be called eata.
config SCSI_EATA_TAGGED_QUEUE
bool "enable tagged command queueing"
......@@ -557,10 +514,8 @@ config SCSI_EATA_PIO
numerous features. You might want to have a look at the SCSI-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called eata_pio.
To compile this driver as a module, choose M here: the
module will be called eata_pio.
config SCSI_FUTURE_DOMAIN
tristate "Future Domain 16xx SCSI/AHA-2920A support"
......@@ -578,10 +533,8 @@ config SCSI_FUTURE_DOMAIN
controller support"). This Future Domain driver works with the older
Adaptec AHA-2920A boards with a Future Domain chip on them.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called fdomain. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called fdomain.
config SCSI_FD_MCS
tristate "Future Domain MCS-600/700 SCSI support"
......@@ -593,10 +546,8 @@ config SCSI_FD_MCS
This driver also supports the Reply SB16/SCSI card (the SCSI part).
It supports multiple adapters in the same system.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called fd_mcs. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called fd_mcs.
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
......@@ -609,10 +560,8 @@ config SCSI_GDTH
in the kernel source in <file:drivers/scsi/gdth.c> and
<file:drivers/scsi/gdth.h.>
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called gdth.
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
......@@ -630,10 +579,8 @@ config SCSI_GENERIC_NCR5380
of the box, you may have to change some settings in
<file:drivers/scsi/g_NCR5380.h>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called g_NCR5380. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called g_NCR5380.
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
......@@ -646,11 +593,8 @@ config SCSI_GENERIC_NCR5380_MMIO
of the box, you may have to change some settings in
<file:drivers/scsi/g_NCR5380.h>.
This driver is also available as a module ( = code which can
be inserted in and removed from the running kernel whenever
you want). The module will be called g_NCR5380_mmio.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called g_NCR5380_mmio.
config SCSI_GENERIC_NCR53C400
bool "Enable NCR53c400 extensions"
......@@ -682,10 +626,8 @@ config SCSI_IBMMCA
bootparam" or see the documentation of your boot loader about how to
pass options to the kernel.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ibmmca.
To compile this driver as a module, choose M here: the
module will be called ibmmca.
config IBMMCA_SCSI_ORDER_STANDARD
bool "Standard SCSI-order"
......@@ -745,11 +687,8 @@ config SCSI_IPS
without modification please contact the author by email at
ipslinux@adaptec.com.
You can build this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
but only a single instance may be loaded. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
The module will be called ips.
To compile this driver as a module, choose M here: the
module will be called ips.
config SCSI_INITIO
tristate "Initio 9100U(W) support"
......@@ -759,10 +698,8 @@ config SCSI_INITIO
read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called initio.
To compile this driver as a module, choose M here: the
module will be called initio.
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
......@@ -772,10 +709,8 @@ config SCSI_INIA100
Please read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called a100u2w.
To compile this driver as a module, choose M here: the
module will be called a100u2w.
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
......@@ -801,10 +736,8 @@ config SCSI_PPA
such as a printer; it is safe to compile both drivers into the
kernel.
This driver is also available as a module which can be inserted in
and removed from the running kernel whenever you want. To compile
this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called ppa.
To compile this driver as a module, choose M here: the
module will be called ppa.
config SCSI_IMM
tristate "IOMEGA parallel port (imm - newer drives)"
......@@ -830,10 +763,8 @@ config SCSI_IMM
such as a printer; it is safe to compile both drivers into the
kernel.
This driver is also available as a module which can be inserted in
and removed from the running kernel whenever you want. To compile
this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called imm.
To compile this driver as a module, choose M here: the
module will be called imm.
config SCSI_IZIP_EPP16
bool "ppa/imm option - Use slow (but safe) EPP-16"
......@@ -873,10 +804,8 @@ config SCSI_NCR53C406A
in the kernel source. Also read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called NCR53c406.
To compile this driver as a module, choose M here: the
module will be called NCR53c406.
config SCSI_NCR_D700
tristate "NCR Dual 700 MCA SCSI support"
......@@ -1106,10 +1035,8 @@ config SCSI_MCA_53C9X
controller based on the NCR 53C94. This driver will allow use of
the controller on the 3550, and very possibly others.
If you want to compile this as a module (= code which can be
inserted and removed from the running kernel whenever you want), say
M here and read <file:Documentation/modules.txt>. The module will
be called mca_53c9x.
To compile this driver as a module, choose M here: the
module will be called mca_53c9x.
config SCSI_PAS16
tristate "PAS16 SCSI support"
......@@ -1121,10 +1048,8 @@ config SCSI_PAS16
of the box, you may have to change some settings in
<file:drivers/scsi/pas16.h>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pas16. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pas16.
config SCSI_PCI2000
tristate "PCI2000 support"
......@@ -1134,10 +1059,8 @@ config SCSI_PCI2000
SCSI host adapter. Please read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module called pci2000 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pci2000.
config SCSI_PCI2220I
tristate "PCI2220i support"
......@@ -1147,10 +1070,8 @@ config SCSI_PCI2220I
SCSI host adapter. Please read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module called pci2220i ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pci2220i.
config SCSI_PSI240I
tristate "PSI240i support"
......@@ -1160,10 +1081,8 @@ config SCSI_PSI240I
SCSI host adapter. Please read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module called psi240i ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called psi240i.
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
......@@ -1182,10 +1101,8 @@ config SCSI_QLOGIC_FAS
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called qlogicfas. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called qlogicfas.
config SCSI_QLOGIC_ISP
tristate "Qlogic ISP SCSI support"
......@@ -1202,10 +1119,8 @@ config SCSI_QLOGIC_ISP
should also read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called qlogicisp. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called qlogicisp.
config SCSI_QLOGIC_FC
tristate "Qlogic ISP FC SCSI support"
......@@ -1213,10 +1128,8 @@ config SCSI_QLOGIC_FC
help
This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called qlogicfc. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called qlogicfc.
config SCSI_QLOGIC_FC_FIRMWARE
bool "Include loadable firmware in driver"
......@@ -1232,10 +1145,8 @@ config SCSI_QLOGIC_1280
help
Say Y if you have a QLogic ISP1x80/1x160 SCSI host adapter.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called qla1280. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called qla1280.
config SCSI_QLOGIC_1280_PIO
bool "Use PIO instead of MMIO" if !X86_VISWS
......@@ -1256,10 +1167,8 @@ config SCSI_QLOGICPTI
PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
driven by a different driver.
This support is also available as a module called qlogicpti ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called qlogicpti.
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
......@@ -1271,10 +1180,8 @@ config SCSI_SEAGATE
doesn't work out of the box, you may have to change some settings in
<file:drivers/scsi/seagate.h>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called seagate. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called seagate.
# definitely looks not 64bit safe:
config SCSI_SIM710
......@@ -1305,11 +1212,8 @@ config SCSI_SYM53C416
insmod sym53c416 sym53c416=<base>,<irq> [sym53c416_1=<base>,<irq>]
There is support for up to four adapters. If you want to compile
this driver as a module ( = code which can be inserted in and
removed from the running kernel whenever you want), say M here and
read <file:Documentation/modules.txt>. The module will be called
sym53c416.
To compile this driver as a module, choose M here: the
module will be called sym53c416.
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support (EXPERIMENTAL)"
......@@ -1323,10 +1227,8 @@ config SCSI_DC395x
Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called dc395x.
To compile this driver as a module, choose M here: the
module will be called dc395x.
config SCSI_DC390T
tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
......@@ -1343,10 +1245,8 @@ config SCSI_DC390T
Also note that there is another generic Am53C974 driver,
"AM53/79C974 PCI SCSI support" below. You can pick either one.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called tmscsim.
To compile this driver as a module, choose M here: the
module will be called tmscsim.
config SCSI_DC390T_NOGENSUPP
bool "_omit_ support for non-DC390 adapters"
......@@ -1377,10 +1277,8 @@ config SCSI_T128
Adaptec, and some former Trantor products are being sold under the
Adaptec name.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called t128. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called t128.
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
......@@ -1396,10 +1294,8 @@ config SCSI_U14_34F
below. You should say Y to both only if you want 24F support as
well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called u14-34f. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called u14-34f.
config SCSI_U14_34F_TAGGED_QUEUE
bool "enable tagged command queueing"
......@@ -1447,10 +1343,8 @@ config SCSI_ULTRASTOR
Note that there is also another driver for the same hardware:
"UltraStor 14F/34F support", above.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ultrastor.
To compile this driver as a module, choose M here: the
module will be called ultrastor.
config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
......@@ -1460,10 +1354,8 @@ config SCSI_NSP32
SCSI host adapter. Please read the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called nsp32.
To compile this driver as a module, choose M here: the
module will be called nsp32.
config SCSI_DEBUG
tristate "SCSI debugging host simulator"
......@@ -1485,10 +1377,10 @@ config SCSI_MESH
Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
other Power Macintoshes do). Say Y to include support for this SCSI
adaptor. This driver is also available as a module called mesh
( = code which can be inserted in and removed from the running
kernel whenever you want). If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
adaptor.
To compile this driver as a module, choose M here: the
module will be called mesh.
config SCSI_MESH_SYNC_RATE
int "maximum synchronous transfer rate (MB/s) (0 = async)"
......@@ -1518,10 +1410,8 @@ config SCSI_MAC53C94
machines which only have one SCSI bus, such as the 7200, also use
the 53C94. Say Y to include support for the 53C94.
This driver is also available as a module called mac53c94 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mac53c94.
source "drivers/scsi/arm/Kconfig"
......@@ -1538,11 +1428,10 @@ config A3000_SCSI
depends on AMIGA && SCSI
help
If you have an Amiga 3000 and have SCSI devices connected to the
built-in SCSI controller, say Y. Otherwise, say N. This driver is
also available as a module ( = code which can be inserted in and
removed from the running kernel whenever you want). The module is
called wd33c93. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>.
built-in SCSI controller, say Y. Otherwise, say N.
To compile this driver as a module, choose M here: the
module will be called wd33c93.
config A4000T_SCSI
bool "A4000T SCSI support (EXPERIMENTAL)"
......@@ -1555,10 +1444,10 @@ config A2091_SCSI
depends on ZORRO && SCSI
help
If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
say N. This driver is also available as a module ( = code which can
be inserted in and removed from the running kernel whenever you
want). The module is called wd33c93. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
say N.
To compile this driver as a module, choose M here: the
module will be called wd33c93.
config GVP11_SCSI
tristate "GVP Series II WD33C93A support"
......@@ -1570,10 +1459,8 @@ config GVP11_SCSI
answer N. This driver does NOT work for the T-Rex series of
accelerators from TekMagic and GVP-M.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module will be called gvp11. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called gvp11.
config CYBERSTORM_SCSI
tristate "CyberStorm SCSI support"
......@@ -1652,14 +1539,15 @@ config ATARI_SCSI
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
a compatible SCSI controller (e.g. for Medusa). This driver is also
available as a module ( = code which can be inserted in and removed
from the running kernel whenever you want). The module is called
atari_scsi. If you want to compile it as a module, say M here and
read <file:Documentation/modules.txt>. This driver supports both
styles of NCR integration into the system: the TT style (separate
DMA), and the Falcon style (via ST-DMA, replacing ACSI). It does
NOT support other schemes, like in the Hades (without DMA).
a compatible SCSI controller (e.g. for Medusa).
To compile this driver as a module, choose M here: the
module will be called atari_scsi.
This driver supports both styles of NCR integration into the
system: the TT style (separate DMA), and the Falcon style (via
ST-DMA, replacing ACSI). It does NOT support other schemes, like
in the Hades (without DMA).
config ATARI_SCSI_TOSHIBA_DELAY
bool "Long delays for Toshiba CD-ROMs"
......@@ -1704,10 +1592,8 @@ config SCSI_MAC_ESP
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mac_esp. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mac_esp.
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
......@@ -1764,10 +1650,8 @@ config SCSI_SUNESP
This is the driver for the Sun ESP SCSI host adapter. The ESP
chipset is present in most SPARC SBUS-based computers.
This support is also available as a module called esp ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called esp.
config SCSI_PC980155
tristate "NEC PC-9801-55 SCSI support"
......
drivers/scsi/aic7xxx/Kconfig.aic7xxx
View file @ 77215b89
......@@ -10,10 +10,8 @@ config SCSI_AIC7XXX
SCSI controllers (the 274x and 284x series). For AAA and ARO based
configurations, only SCSI functionality is provided.
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called aic7xxx.
To compile this driver as a module, choose M here: the
module will be called aic7xxx.
config AIC7XXX_CMDS_PER_DEVICE
int "Maximum number of TCQ commands per device"
......
drivers/scsi/pcmcia/Kconfig
View file @ 77215b89
......@@ -12,10 +12,8 @@ config PCMCIA_AHA152X
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
This driver is also available as a module called aha152x_cs ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called aha152x_cs.
config PCMCIA_FDOMAIN
tristate "Future Domain PCMCIA support"
......@@ -24,10 +22,8 @@ config PCMCIA_FDOMAIN
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
This driver is also available as a module called fdomain_cs ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called fdomain_cs.
config PCMCIA_NINJA_SCSI
tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
......@@ -60,10 +56,8 @@ config PCMCIA_NINJA_SCSI
HP M820e CDRW's card
etc.
This driver is also available as a module called nsp_cs ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called nsp_cs.
config PCMCIA_QLOGIC
tristate "Qlogic PCMCIA support"
......@@ -72,9 +66,7 @@ config PCMCIA_QLOGIC
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
This driver is also available as a module called qlogic_cs ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called qlogic_cs.
endmenu
drivers/serial/Kconfig
View file @ 77215b89
......@@ -21,9 +21,8 @@ config SERIAL_8250
serial port drivers do not need this driver built in for them to
work.)
If you want to compile this driver as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
serial.
To compile this driver as a module, choose M here: the
module will be called serial.
[WARNING: Do not compile this driver as a module if you are using
non-standard serial ports, since the configuration information will
be lost when the driver is unloaded. This limitation may be lifted
......@@ -72,10 +71,9 @@ config SERIAL_8250_CS
multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
credit-card size devices often used with laptops.)
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called serial_cs. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called serial_cs.
If unsure, say N.
config SERIAL_8250_ACPI
......
drivers/telephony/Kconfig
View file @ 77215b89
......@@ -13,10 +13,8 @@ config PHONE
Note: this has nothing to do with modems. You do not need to say Y
here in order to be able to use a modem under Linux.
This support is also available as a module. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>. The module will be called
phonedev.
To compile this driver as a module, choose M here: the
module will be called phonedev.
config PHONE_IXJ
tristate "QuickNet Internet LineJack/PhoneJack support"
......
drivers/usb/Kconfig
View file @ 77215b89
......@@ -33,10 +33,8 @@ config USB
It doesn't normally hurt to select them all if you are not certain.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usbcore. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usbcore.
source "drivers/usb/core/Kconfig"
......@@ -82,10 +80,8 @@ config USB_USS720
Say Y here if you own an USS-720 USB->Parport cable and intend to
connect anything other than a printer to it.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called uss720. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called uss720.
source "drivers/usb/serial/Kconfig"
......
drivers/usb/class/Kconfig
View file @ 77215b89
......@@ -11,10 +11,8 @@ config USB_AUDIO
Say Y here if you want to connect USB audio equipment such as
speakers to your computer's USB port.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called audio. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called audio.
comment "USB Bluetooth TTY can only be used with disabled Bluetooth subsystem"
depends on USB && BT
......@@ -36,10 +34,8 @@ config USB_BLUETOOTH_TTY
If in doubt, say N here.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called bluetty. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called bluetty.
config USB_MIDI
tristate "USB MIDI support"
......@@ -59,10 +55,8 @@ config USB_MIDI
* Roland UA-100
* Yamaha MU1000
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-midi. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usb-midi.
config USB_ACM
tristate "USB Modem (CDC ACM) support"
......@@ -76,10 +70,8 @@ config USB_ACM
/proc/bus/usb/devices, then your modem will not work with this
driver.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called acm. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called acm.
config USB_PRINTER
tristate "USB Printer support"
......@@ -88,8 +80,6 @@ config USB_PRINTER
Say Y here if you want to connect a USB printer to your computer's
USB port.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usblp. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usblp.
drivers/usb/host/Kconfig
View file @ 77215b89
......@@ -26,10 +26,8 @@ config USB_EHCI_HCD
You may want to read <file:Documentation/usb/ehci.txt>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ehci-hcd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ehci-hcd.
config USB_OHCI_HCD
tristate "OHCI HCD support"
......@@ -44,10 +42,8 @@ config USB_OHCI_HCD
based system where you're not sure, the "lspci -v" entry will list the
right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ohci-hcd. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ohci-hcd.
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
......@@ -62,10 +58,8 @@ config USB_UHCI_HCD
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
133). If unsure, say Y.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called uhci-hcd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called uhci-hcd.
config USB_SL811HS
tristate "SL811HS support"
......@@ -75,8 +69,6 @@ config USB_SL811HS
If you do not know what this is, please say N.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called hc_sl811. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called hc_sl811.
drivers/usb/image/Kconfig
View file @ 77215b89
......@@ -14,10 +14,8 @@ config USB_MDC800
To use it create a device node with "mknod /dev/mustek c 180 32" and
configure it in your software.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mdc800. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mdc800.
config USB_SCANNER
tristate "USB Scanner support"
......@@ -27,10 +25,8 @@ config USB_SCANNER
USB port. Please read <file:Documentation/usb/scanner.txt> for more
information.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called scanner. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called scanner.
config USB_MICROTEK
tristate "Microtek X6USB scanner support"
......
drivers/usb/input/Kconfig
View file @ 77215b89
......@@ -20,10 +20,8 @@ config USB_HID
If unsure, say Y.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called hid. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called hid.
comment "Input core support is needed for USB HID input layer or HIDBP support"
depends on USB && INPUT=n
......@@ -104,10 +102,8 @@ config USB_KBD
This is almost certainly not what you want. This is mostly
useful for embedded applications or simple keyboards.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usbkbd. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usbkbd.
If even remotely unsure, say N.
......@@ -122,10 +118,8 @@ config USB_MOUSE
This is almost certainly not what you want. This is mostly
useful for embedded applications or simple mice.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usbmouse. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usbmouse.
If even remotely unsure, say N.
......@@ -140,10 +134,8 @@ config USB_AIPTEK
(CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
(CONFIG_INPUT_EVDEV) as well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called aiptek. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called aiptek.
config USB_WACOM
tristate "Wacom Intuos/Graphire tablet support"
......@@ -154,10 +146,8 @@ config USB_WACOM
(CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
(CONFIG_INPUT_EVDEV) as well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called wacom. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called wacom.
config USB_KBTAB
tristate "KB Gear JamStudio tablet support"
......@@ -168,10 +158,8 @@ config USB_KBTAB
(CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
(CONFIG_INPUT_EVDEV) as well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called kbtab.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called kbtab.
config USB_POWERMATE
tristate "Griffin PowerMate and Contour Jog support"
......@@ -184,10 +172,8 @@ config USB_POWERMATE
You can download userspace tools from http://sowerbutts.com/powermate/
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called powermate. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called powermate.
config USB_XPAD
tristate "X-Box gamepad support"
......@@ -200,8 +186,6 @@ config USB_XPAD
For information about how to connect the X-Box pad to USB, see
Documentation/input/xpad.txt.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called xpad. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called xpad.
drivers/usb/media/Kconfig
View file @ 77215b89
......@@ -14,10 +14,8 @@ config USB_DABUSB
isochronous transactions. URB's are explained in
<file:Documentation/usb/URB.txt>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dabusb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called dabusb.
comment "Video4Linux support is needed for USB Multimedia device support"
depends on USB && VIDEO_DEV=n
......@@ -33,10 +31,8 @@ config USB_VICAM
Information on this API and pointers to "v4l" programs may be found
on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called vicam. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called vicam.
config USB_DSBR
tristate "D-Link USB FM radio support (EXPERIMENTAL)"
......@@ -53,10 +49,8 @@ config USB_DSBR
"v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called dsbr100. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called dsbr100.
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
......@@ -72,13 +66,12 @@ config USB_IBMCAM
"v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ibmcam. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. This
camera has several configuration options which can be specified when
you load the module. Read <file:Documentation/usb/ibmcam.txt> to
learn more.
To compile this driver as a module, choose M here: the
module will be called ibmcam.
This camera has several configuration options which
can be specified when you load the module. Read
<file:Documentation/usb/ibmcam.txt> to learn more.
config USB_KONICAWC
tristate "USB Konica Webcam support"
......@@ -93,10 +86,8 @@ config USB_KONICAWC
"v4l" programs may be found on the WWW at
<http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called konicawc. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called konicawc.
config USB_OV511
tristate "USB OV511 Camera support"
......@@ -111,10 +102,8 @@ config USB_OV511
Information on this API and pointers to "v4l" programs may be found
on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ov511. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ov511.
config USB_PWC
tristate "USB Philips Cameras"
......@@ -152,10 +141,8 @@ config USB_PWC
Information on this API and pointers to "v4l" programs may be found
on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pwc. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pwc.
config USB_SE401
tristate "USB SE401 Camera support"
......@@ -170,10 +157,8 @@ config USB_SE401
Information on this API and pointers to "v4l" programs may be found
on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called se401. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called se401.
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
......@@ -189,8 +174,6 @@ config USB_STV680
Information on this API and pointers to "v4l" programs may be found
on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called stv680. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called stv680.
drivers/usb/misc/Kconfig
View file @ 77215b89
......@@ -14,10 +14,8 @@ config USB_EMI26
After firmware load the device is handled with standard linux
USB Audio driver.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called audio. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called audio.
config USB_TIGL
tristate "Texas Instruments Graph Link USB (aka SilverLink) cable support"
......@@ -30,10 +28,8 @@ config USB_TIGL
If you enable this driver, you will be able to communicate with
your calculator through a set of device nodes under /dev.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tiglusb. If you want to compile it as a
module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called tiglusb.
If you don't know what the SilverLink cable is or what a Texas
Instruments graphing calculator is, then you probably don't need this
......@@ -48,10 +44,8 @@ config USB_AUERSWALD
Say Y here if you want to connect an Auerswald USB ISDN Device
to your computer's USB port.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called auerswald. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called auerswald.
config USB_RIO500
tristate "USB Diamond Rio500 support (EXPERIMENTAL)"
......@@ -61,10 +55,8 @@ config USB_RIO500
computer's USB port. Please read <file:Documentation/usb/rio.txt>
for more information.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rio500. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rio500.
config USB_BRLVGER
tristate "Tieman Voyager USB Braille display support (EXPERIMENTAL)"
......@@ -74,10 +66,8 @@ config USB_BRLVGER
Tieman. See <file:Documentation/usb/brlvger.txt> for more
information.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called brlvger. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called brlvger.
config USB_LCD
tristate "USB LCD driver support"
......@@ -88,10 +78,8 @@ config USB_LCD
alphanumeric LCD modules. See <http://www.usblcd.de> for more
information.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usblcd. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usblcd.
config USB_SPEEDTOUCH
tristate "Alcatel Speedtouch USB support"
......@@ -101,10 +89,8 @@ config USB_SPEEDTOUCH
modem. In order to use your modem you will need to install some user
space tools, see <http://www.linux-usb.org/SpeedTouch/> for details.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called speedtch. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called speedtch.
config USB_TEST
tristate "USB testing driver (DEVELOPMENT)"
......
drivers/usb/net/Kconfig
View file @ 77215b89
......@@ -23,10 +23,8 @@ config USB_AX8817X_STANDALONE
typically on eth0, if it is the only ethernet device, or perhaps on
eth1, if you have a PCI or ISA ethernet card installed.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ax8817x.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ax8817x.
config USB_CATC
tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
......@@ -44,10 +42,8 @@ config USB_CATC
typically on eth0, if it is the only ethernet device, or perhaps on
eth1, if you have a PCI or ISA ethernet card installed.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called catc. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called catc.
config USB_KAWETH
tristate "USB KLSI KL5USB101-based ethernet device support"
......@@ -86,10 +82,8 @@ config USB_KAWETH
typically on eth0, if it is the only ethernet device, or perhaps on
eth1, if you have a PCI or ISA ethernet card installed.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called kaweth. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called kaweth.
config USB_PEGASUS
tristate "USB Pegasus/Pegasus-II based ethernet device support"
......@@ -102,10 +96,8 @@ config USB_PEGASUS
is Pegasus or Pegasus II based then send me (petkan@users.sourceforge.net)
vendor and device IDs.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pegasus. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pegasus.
config USB_RTL8150
tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
......@@ -115,10 +107,8 @@ config USB_RTL8150
Send me (petkan@users.sourceforge.net) any comments you may have.
You can also check for updates at http://pegasus2.sourceforge.net/
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rtl8150. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rtl8150.
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
......@@ -151,10 +141,8 @@ config USB_USBNET
For more information see <http://www.linux-usb.org/usbnet/>.
This code is also available as a kernel module (code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usbnet. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usbnet.
comment "USB Host-to-Host Cables"
depends on USB_USBNET
......
drivers/usb/serial/Kconfig
View file @ 77215b89
......@@ -17,10 +17,8 @@ config USB_SERIAL
information on the specifics of the different devices that are
supported, and on how to use them.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usbserial. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usbserial.
config USB_SERIAL_DEBUG
bool "USB Serial Converter verbose debug"
......@@ -70,10 +68,8 @@ config USB_SERIAL_BELKIN
adaptor (F5U103 is one of the model numbers) or the Peracom single
port USB to serial adapter.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called belkin_sa. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called belkin_sa.
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
......@@ -82,10 +78,8 @@ config USB_SERIAL_WHITEHEAT
Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
USB to serial converter device.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called whiteheat. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called whiteheat.
config USB_SERIAL_DIGI_ACCELEPORT
tristate "USB Digi International AccelePort USB Serial Driver"
......@@ -99,11 +93,8 @@ config USB_SERIAL_DIGI_ACCELEPORT
This driver works under SMP with the usb-uhci driver. It does not
work under SMP with the uhci driver.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called digi_acceleport. If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called digi_acceleport.
config USB_SERIAL_EMPEG
tristate "USB Empeg empeg-car Mark I/II Driver"
......@@ -114,10 +105,8 @@ config USB_SERIAL_EMPEG
device node. See <file:Documentation/usb/usb-serial.txt> for more
tidbits of information.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called empeg. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called empeg.
config USB_SERIAL_FTDI_SIO
tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
......@@ -130,10 +119,8 @@ config USB_SERIAL_FTDI_SIO
See <http://ftdi-usb-sio.sourceforge.net/> for more
information on this driver and the device.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ftdi_sio. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ftdi_sio.
config USB_SERIAL_VISOR
tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
......@@ -144,10 +131,8 @@ config USB_SERIAL_VISOR
<http://usbvisor.sourceforge.net/> for more information on using this
driver.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called visor. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called visor.
config USB_SERIAL_IPAQ
tristate "USB PocketPC PDA Driver"
......@@ -158,10 +143,8 @@ config USB_SERIAL_IPAQ
using a USB cradle/cable. For information on using the driver,
read <file:Documentation/usb/usb-serial.txt>.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ipaq. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ipaq.
config USB_SERIAL_IR
tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
......@@ -171,10 +154,8 @@ config USB_SERIAL_IR
devices. This is useful if you do not want to use the full IrDA
stack.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ir-usb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ir-usb.
config USB_SERIAL_EDGEPORT
tristate "USB Inside Out Edgeport Serial Driver"
......@@ -199,10 +180,8 @@ config USB_SERIAL_EDGEPORT
Edgeport/4 DIN
Edgeport/16 Dual
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called io_edgeport. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called io_edgeport.
config USB_SERIAL_EDGEPORT_TI
tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
......@@ -212,10 +191,8 @@ config USB_SERIAL_EDGEPORT_TI
Networks (Digi) that are not supported by the io_edgeport driver.
This includes the Edgeport/1 device.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called io_ti. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called io_ti.
config USB_SERIAL_KEYSPAN_PDA
tristate "USB Keyspan PDA Single Port Serial Driver"
......@@ -225,10 +202,8 @@ config USB_SERIAL_KEYSPAN_PDA
serial converter device. This driver makes use of firmware
developed from scratch by Brian Warner.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called keyspan_pda. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
config USB_SERIAL_KEYSPAN
tristate "USB Keyspan USA-xxx Serial Driver"
......@@ -241,10 +216,8 @@ config USB_SERIAL_KEYSPAN
See <http://misc.nu/hugh/keyspan.html> for more information.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called keyspan. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called keyspan.
config USB_SERIAL_KEYSPAN_MPR
bool "USB Keyspan MPR Firmware"
......@@ -337,10 +310,8 @@ config USB_SERIAL_KLSI
Please read <file:Documentation/usb/usb-serial.txt> for more
information.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called kl5kusb105. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called kl5kusb105.
config USB_SERIAL_KOBIL_SCT
tristate "USB KOBIL chipcard reader (EXPERIMENTAL)"
......@@ -357,10 +328,8 @@ config USB_SERIAL_KOBIL_SCT
- KAAN Professional
Note that you need a current CT-API.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called kobil_sct. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called kobil_sct.
config USB_SERIAL_MCT_U232
tristate "USB MCT Single Port Serial Driver"
......@@ -372,10 +341,8 @@ config USB_SERIAL_MCT_U232
This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
BAY devices.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called mct_u232. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mct_u232.
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
......@@ -384,10 +351,8 @@ config USB_SERIAL_PL2303
Say Y here if you want to use the PL2303 USB Serial single port
adapter from Prolific.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called pl2303. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pl2303.
config USB_SERIAL_SAFE
tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
......@@ -405,10 +370,8 @@ config USB_SERIAL_CYBERJACK
reader. This is an interface to ISO 7816 compatible contactbased
chipcards, e.g. GSM SIMs.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called cyberjack. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called cyberjack.
If unsure, say N.
......@@ -420,10 +383,8 @@ config USB_SERIAL_XIRCOM
serial converter device. This driver makes use of firmware
developed from scratch by Brian Warner.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called keyspan_pda. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
......@@ -431,10 +392,8 @@ config USB_SERIAL_OMNINET
help
Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called omninet. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called omninet.
config USB_EZUSB
bool
......
drivers/usb/storage/Kconfig
View file @ 77215b89
......@@ -15,10 +15,8 @@ config USB_STORAGE
similar devices. This driver may also be used for some cameras and
card readers.
This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usb-storage. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called usb-storage.
config USB_STORAGE_DEBUG
bool "USB Mass Storage verbose debug"
......
drivers/video/Kconfig
View file @ 77215b89
......@@ -158,10 +158,8 @@ config FB_AMIGA
This is the frame buffer device driver for the builtin graphics
chipset found in Amigas.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called amifb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called amifb.
config FB_AMIGA_OCS
bool "Amiga OCS chipset support"
......@@ -288,11 +286,8 @@ config FB_VGA16
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
This code is also available as a module. If you want to compile it
as a module ( = code which can be inserted in and removed from the
running kernel whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called
vga16fb.
To compile this driver as a module, choose M here: the
module will be called vga16fb.
config FB_STI
tristate "HP STI frame buffer device support"
......@@ -348,10 +343,8 @@ config FB_HGA
help
Say Y here if you have a Hercules mono graphics card.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want).
The module will be called hgafb. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called hgafb.
As this card technology is 15 years old, most people will answer N
here.
......@@ -404,10 +397,8 @@ config FB_PVR2
This driver may or may not work on other PowerVR 2 cards, but is
totally untested. Use at your own risk. If unsure, say N.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want).
The module will be called pvr2fb. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called pvr2fb.
You can pass several parameters to the driver at boot time or at
module load time. The parameters look like "video=pvr2:XXX", where
......@@ -460,10 +451,8 @@ config FB_RIVA
chips.
Say Y if you have such a graphics board.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called rivafb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rivafb.
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
......@@ -472,10 +461,8 @@ config FB_I810
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want).
The module will be called i810fb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called i810fb.
For more information, please read
<file:Documentation/fb/intel810.txt>
......@@ -512,10 +499,8 @@ config FB_MATROX
Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
Matrox G400, G450 or G550 card in your box.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want).
The module will be called matroxfb. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called matroxfb.
You can pass several parameters to the driver at boot time or at
module load time. The parameters look like "video=matrox:XXX", and
......@@ -677,10 +662,8 @@ config FB_ATY128
Say Y if you have such a graphics board and read
<file:Documentation/fb/aty128fb.txt>.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called aty128fb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called aty128fb.
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
......@@ -689,10 +672,8 @@ config FB_ATY
This driver supports graphics boards with the ATI Mach64 chips.
Say Y if you have such a graphics board.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called atyfb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called atyfb.
config FB_ATY_CT
bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
......@@ -750,10 +731,8 @@ config FB_NEOMAGIC
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called neofb. If you want to compile it as a
module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called neofb.
config FB_3DFX
tristate "3Dfx Banshee/Voodoo3 display support"
......@@ -762,10 +741,8 @@ config FB_3DFX
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called tdfxfb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called tdfxfb.
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
......@@ -774,10 +751,8 @@ config FB_VOODOO1
Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
Voodoo2 (cvg) based graphics card.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want).
The module will be called sstfb. If you want to compile it as
a module, say M here and read Documentation/modules.txt.
To compile this driver as a module, choose M here: the
module will be called sstfb.
WARNING: Do not use any application that uses the 3D engine
(namely glide) while using this driver.
......@@ -795,10 +770,8 @@ config FB_TRIDENT
Say Y if you have such a graphics board.
The driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called tridentfb. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called tridentfb.
config FB_PM3
tristate "Permedia3 support"
......@@ -921,10 +894,8 @@ config FB_VIRTUAL
the innocent, it has to be enabled explicitly at boot time using the
kernel option `video=vfb:'.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called vfb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called vfb.
If unsure, say N.
if VT
......
drivers/video/console/Kconfig
View file @ 77215b89
......@@ -51,10 +51,8 @@ config MDA_CONSOLE
say Y here if your MDA card is the primary card in your system; the
normal VGA driver will handle it.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want).
The module will be called mdacon. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called mdacon.
If unsure, say N.
......
fs/Kconfig
View file @ 77215b89
......@@ -43,9 +43,7 @@ config EXT2_FS
available from
<http://jnewbigin-pc.it.swin.edu.au/Linux/Explore2fs.htm>.
If you want to compile this file system as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want), say M here and read <file:Documentation/modules.txt>. The
To compile this file system support as a module, choose M here: the
module will be called ext2. Be aware however that the file system
of your root partition (the one containing the directory /) cannot
be compiled as a module, and so this could be dangerous. Most
......@@ -111,9 +109,7 @@ config EXT3_FS
e2fsprogs version 1.20 or later in order to create ext3 journals
(available at <http://sourceforge.net/projects/e2fsprogs/>).
If you want to compile this file system as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want), say M here and read <file:Documentation/modules.txt>. The
To compile this file system support as a module, choose M here: the
module will be called ext3. Be aware however that the file system
of your root partition (the one containing the directory /) cannot
be compiled as a module, and so this may be dangerous.
......@@ -170,11 +166,9 @@ config JBD
If you are using the ext3 file system, you need to say Y here. If
you are not using ext3 then you will probably want to say N.
If you want to compile this device as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called jbd. If you are compiling ext3 into the kernel,
you cannot compile this code as a module.
To compile this device as a module, choose M here: the module will be
called jbd. If you are compiling ext3 into the kernel, you cannot
compile this code as a module.
config JBD_DEBUG
bool "JBD (ext3) debugging support"
......@@ -310,9 +304,7 @@ config XFS_FS
for complete details. This implementation is on-disk compatible
with the IRIX version of XFS.
If you want to compile this file system as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want), say M here and read <file:Documentation/modules.txt>. The
To compile this file system support as a module, choose M here: the
module will be called xfs. Be aware, however, that if the file
system of your root partition is compiled as a module, you'll need
to use an initial ramdisk (initrd) to boot.
......@@ -375,10 +367,8 @@ config MINIX_FS
on older Linux floppy disks. This option will enlarge your kernel
by about 28 KB. If unsure, say N.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called minix. Note that the file system of your root
To compile this file system support as a module, choose M here: the
module will be called minix. Note that the file system of your root
partition (the one containing the directory /) cannot be compiled as
a module.
......@@ -390,11 +380,8 @@ config ROMFS_FS
other read-only media as well. Read
<file:Documentation/filesystems/romfs.txt> for details.
This file system support is also available as a module ( = code
which can be inserted in and removed from the running kernel
whenever you want). The module is called romfs. If you want to
compile it as a module, say M here and read
<file:Documentation/modules.txt>. Note that the file system of your
To compile this file system support as a module, choose M here: the
module will be called romfs. Note that the file system of your
root partition (the one containing the directory /) cannot be a
module.
......@@ -450,10 +437,8 @@ config AUTOFS_FS
features, say N here and say Y to "Kernel automounter v4 support",
below.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called autofs.
To compile this support as a module, choose M here: the module will be
called autofs.
If you are not a part of a fairly large, distributed network, you
probably do not need an automounter, and can say N here.
......@@ -470,11 +455,9 @@ config AUTOFS4_FS
<ftp://ftp.kernel.org/pub/linux/daemons/autofs/testing-v4/>; you also
want to answer Y to "NFS file system support", below.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called autofs4. You will need to add "alias autofs
autofs4" to your modules configuration file.
To compile this support as a module, choose M here: the module will be
called autofs4. You will need to add "alias autofs autofs4" to your
modules configuration file.
If you are not a part of a fairly large, distributed network or
don't have a laptop which needs to dynamically reconfigure to the
......@@ -496,10 +479,8 @@ config ISO9660_FS
available from <http://www.tldp.org/docs.html#howto>), thereby
enlarging your kernel by about 27 KB; otherwise say N.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called isofs.
To compile this file system support as a module, choose M here: the
module will be called isofs.
config JOLIET
bool "Microsoft Joliet CDROM extensions"
......@@ -537,11 +518,8 @@ config UDF_FS
if written to by other UDF utilities, such as DirectCD.
Please read <file:Documentation/filesystems/udf.txt>.
This file system support is also available as a module ( = code
which can be inserted in and removed from the running kernel
whenever you want). The module is called udf. If you want to
compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this file system support as a module, choose M here: the
module will be called udf.
If unsure, say N.
......@@ -582,12 +560,10 @@ config FAT_FS
The FAT support will enlarge your kernel by about 37 KB. If unsure,
say Y.
If you want to compile this as a module however ( = code which can
be inserted in and removed from the running kernel whenever you
want), say M here and read <file:Documentation/modules.txt>. The
module will be called fat. Note that if you compile the FAT
support as a module, you cannot compile any of the FAT-based file
systems into the kernel -- they will have to be modules as well.
To compile this as a module, choose M here: the module will be called
fat. Note that if you compile the FAT support as a module, you
cannot compile any of the FAT-based file systems into the kernel
-- they will have to be modules as well.
The file system of your root partition (the one containing the
directory /) cannot be a module, so don't say M here if you intend
to use UMSDOS as your root file system.
......@@ -618,11 +594,8 @@ config MSDOS_FS
This option will enlarge your kernel by about 7 KB. If unsure,
answer Y. This will only work if you said Y to "DOS FAT fs support"
as well. If you want to compile this as a module however ( = code
which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>.
The module will be called msdos.
as well. To compile this as a module, choose M here: the module will
be called msdos.
config VFAT_FS
tristate "VFAT (Windows-95) fs support"
......@@ -643,10 +616,8 @@ config VFAT_FS
the file <file:Documentation/filesystems/vfat.txt> for details. If
unsure, say Y.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called vfat.
To compile this as a module, choose M here: the module will be called
vfat.
config UMSDOS_FS
#dep_tristate ' UMSDOS: Unix-like file system on top of standard MSDOS fs' CONFIG_UMSDOS_FS $CONFIG_MSDOS_FS
......@@ -672,12 +643,10 @@ config UMSDOS_FS
This option enlarges your kernel by about 28 KB and it only works if
you said Y to both "DOS FAT fs support" and "MSDOS fs support"
above. If you want to compile this as a module ( = code which can
be inserted in and removed from the running kernel whenever you
want), say M here and read <file:Documentation/modules.txt>. The
module will be called umsdos. Note that the file system of your
root partition (the one containing the directory /) cannot be a
module, so saying M could be dangerous. If unsure, say N.
above. To compile this as a module, choose M here: the module will be
called umsdos. Note that the file system of your root partition
(the one containing the directory /) cannot be a module, so saying M
could be dangerous. If unsure, say N.
config NTFS_FS
tristate "NTFS file system support (read only)"
......@@ -686,10 +655,8 @@ config NTFS_FS
information see <file:Documentation/filesystems/ntfs.txt>. Saying Y
here would allow you to read from NTFS partitions.
This file system is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ntfs. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this file system support as a module, choose M here: the
module will be called ntfs.
If you are not using Windows NT/2000/XP in addition to Linux on your
computer it is safe to say N.
......@@ -877,10 +844,8 @@ config RAMFS
you need a file system which lives in RAM with limit checking use
tmpfs.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ramfs.
To compile this as a module, choose M here: the module will be called
ramfs.
endmenu
......@@ -901,10 +866,8 @@ config ADFS_FS
/dev/[hs]d?1) on each of your drives. Please read the file
<file:Documentation/filesystems/adfs.txt> for further details.
This code is also available as a module called adfs ( = code which
can be inserted in and removed from the running kernel whenever you
want). If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the module will be
called adfs.
If unsure, say N.
......@@ -935,11 +898,8 @@ config AFFS_FS
If you want to do this, you will also need to say Y or M to "Loop
device support", above.
This file system is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called affs. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. If unsure,
say N.
To compile this file system support as a module, choose M here: the
module will be called affs. If unsure, say N.
config HFS_FS
tristate "Apple Macintosh file system support (EXPERIMENTAL)"
......@@ -950,11 +910,8 @@ config HFS_FS
Please read <file:fs/hfs/HFS.txt> to learn about the available mount
options.
This file system support is also available as a module ( = code
which can be inserted in and removed from the running kernel
whenever you want). The module is called hfs. If you want to
compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this file system support as a module, choose M here: the
module will be called hfs.
config BEFS_FS
tristate "BeOS file systemv(BeFS) support (read only) (EXPERIMENTAL)"
......@@ -972,9 +929,7 @@ config BEFS_FS
If you don't know what this is about, say N.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read Documentation/modules.txt. The module will be
To compile this as a module, choose M here: the module will be
called befs.
config BEFS_DEBUG
......@@ -1000,12 +955,9 @@ config BFS_FS
If you don't know what this is about, say N.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called bfs. Note that the file system of your root
partition (the one containing the directory /) cannot be compiled as
a module.
To compile this as a module, choose M here: the module will be called
bfs. Note that the file system of your root partition (the one
containing the directory /) cannot be compiled as a module.
......@@ -1021,10 +973,8 @@ config EFS_FS
what all this is about, it's safe to say N. For more information
about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
If you want to compile the EFS file system support as a module ( =
code which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called efs.
To compile the EFS file system support as a module, choose M here: the
module will be called efs.
config JFFS_FS
tristate "Journalling Flash File System (JFFS) support"
......@@ -1107,11 +1057,9 @@ config CRAMFS
See <file:Documentation/filesystems/cramfs.txt> and
<file:fs/cramfs/README> for further information.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called cramfs. Note that the root file system (the one
containing the directory /) cannot be compiled as a module.
To compile this as a module, choose M here: the module will be called
cramfs. Note that the root file system (the one containing the
directory /) cannot be compiled as a module.
If unsure, say N.
......@@ -1128,11 +1076,8 @@ config VXFS_FS
fstab(5) is 'vxfs' as it describes the file system format, not
the actual driver.
This file system is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called freevxfs. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
To compile this as a module, choose M here: the module will be
called freevxfs. If unsure, say N.
config HPFS_FS
......@@ -1146,11 +1091,8 @@ config HPFS_FS
option in order to be able to read them. Read
<file:Documentation/filesystems/hpfs.txt>.
This file system is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called hpfs. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. If unsure,
say N.
To compile this file system support as a module, choose M here: the
module will be called hpfs. If unsure, say N.
......@@ -1164,11 +1106,8 @@ config QNX4FS_FS
Unless you say Y to "QNX4FS read-write support" below, you will
only be able to read these file systems.
This file system support is also available as a module ( = code
which can be inserted in and removed from the running kernel
whenever you want). The module is called qnx4. If you want to
compile it as a module, say M here and read
<file:Documentation/modules.txt>.
To compile this file system support as a module, choose M here: the
module will be called qnx4.
If you don't know whether you need it, then you don't need it:
answer N.
......@@ -1215,10 +1154,8 @@ config SYSV_FS
<file:Documentation/filesystems/sysv-fs.txt>.
Saying Y here will enlarge your kernel by about 27 KB.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called sysv.
To compile this as a module, choose M here: the module will be called
sysv.
If you haven't heard about all of this before, it's safe to say N.
......@@ -1248,10 +1185,8 @@ config UFS_FS
NeXT character set to the Latin1 character set; use the program
recode ("info recode") for this purpose.
If you want to compile the UFS file system support as a module ( =
code which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called ufs.
To compile the UFS file system support as a module, choose M here: the
module will be called ufs.
If you haven't heard about all of this before, it's safe to say N.
......@@ -1289,10 +1224,8 @@ config NFS_FS
If you say Y here, you should have said Y to TCP/IP networking also.
This option would enlarge your kernel by about 27 KB.
This file system is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called nfs. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this file system support as a module, choose M here: the
module will be called nfs.
If you are configuring a diskless machine which will mount its root
file system over NFS at boot time, say Y here and to "Kernel
......@@ -1347,11 +1280,8 @@ config NFSD
Please read the NFS-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
The NFS server is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called nfsd. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>. If unsure,
say N.
To compile the NFS server support as a module, choose M here: the
module will be called nfsd. If unsure, say N.
config NFSD_V3
bool "Provide NFSv3 server support"
......@@ -1456,10 +1386,8 @@ config SMB_FS
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
If you want to compile the SMB support as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want), say M here and read <file:Documentation/modules.txt>. The
module will be called smbfs. Most people say N, however.
To compile the SMB support as a module, choose M here: the module will
be called smbfs. Most people say N, however.
config SMB_NLS_DEFAULT
bool "Use a default NLS"
......@@ -1530,11 +1458,8 @@ config NCP_FS
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called ncpfs. Say N unless you are connected to a Novell
network.
To compile this as a module, choose M here: the module will be called
ncpfs. Say N unless you are connected to a Novell network.
source "fs/ncpfs/Kconfig"
......@@ -1557,10 +1482,8 @@ config CODA_FS
<file:Documentation/filesystems/coda.txt> and check out the Coda
home page <http://www.coda.cs.cmu.edu/>.
If you want to compile the coda client support as a module ( = code
which can be inserted in and removed from the running kernel
whenever you want), say M here and read
<file:Documentation/modules.txt>. The module will be called coda.
To compile the coda client support as a module, choose M here: the
module will be called coda.
config INTERMEZZO_FS
tristate "InterMezzo file system support (replicating fs) (EXPERIMENTAL)"
......
fs/Kconfig.binfmt
View file @ 77215b89
......@@ -23,11 +23,9 @@ config BINFMT_ELF
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
To compile this as a module, choose M here: the module will be called
binfmt_elf. Saying M or N here is dangerous because some crucial
programs on your system might be in ELF format.
config BINFMT_FLAT
tristate "Kernel support for flat binaries"
......
net/Kconfig
View file @ 77215b89
......@@ -31,12 +31,9 @@ config PACKET
protocol implemented in the kernel, e.g. tcpdump. If you want them
to work, choose Y.
This driver is also available as a module called af_packet ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>; if you use modprobe
or kmod, you may also want to add "alias net-pf-17 af_packet" to
/etc/modules.conf.
To compile this driver as a module, choose M here: the module will
be called af_packet. If you use modprobe or kmod, you may also
want to add "alias net-pf-17 af_packet" to /etc/modules.conf.
If unsure, say Y.
......@@ -69,10 +66,7 @@ config UNIX
an embedded system or something similar, you therefore definitely
want to say Y here.
However, the socket support is also available as a module ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>. The module will be
To compile this driver as a module, choose M here: the module will be
called unix. If you try building this as a module and you have
said Y to "Kernel module loader support" above, be sure to add
'alias net-pf-1 unix' to your /etc/modules.conf file. Note that
......@@ -140,10 +134,8 @@ config IPV6
given in <file:Documentation/Changes>. You will still be able to do
regular IPv4 networking as well.
This protocol support is also available as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want). The module will be called ipv6. If you want to compile it
as a module, say M here and read <file:Documentation/modules.txt>.
To compile this protocol support as a module, choose M here: the
module will be called ipv6.
It is safe to say N here for now.
......@@ -197,9 +189,7 @@ config BRIDGE
Enabling arptables support when bridging will let arptables see
bridged ARP traffic in the arptables FORWARD chain.
If you want to compile this code as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this code as a module, choose M here: the module
will be called bridge.
If unsure, say N.
......@@ -413,12 +403,10 @@ config IPX
General information about how to connect Linux, Windows machines and
Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
The IPX driver would enlarge your kernel by about 16 KB. This driver
is also available as a module ( = code which can be inserted in and
removed from the running kernel whenever you want). The module will
be called ipx. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>. Unless you want to
integrate your Linux box with a local Novell network, say N.
The IPX driver would enlarge your kernel by about 16 KB. To compile
this driver as a module, choose M here: the module will be called ipx.
Unless you want to integrate your Linux box with a local Novell
network, say N.
source "net/ipx/Kconfig"
......@@ -443,14 +431,11 @@ config ATALK
<http://www.tldp.org/docs.html#howto>, contains valuable
information as well.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module is called appletalk. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. You
almost certainly want to compile it as a module so you can restart
your AppleTalk stack without rebooting your machine. I hear that
the GNU boycott of Apple is over, so even politically correct people
are allowed to say Y here.
To compile this driver as a module, choose M here: the module will be
called appletalk. You almost certainly want to compile it as a
module so you can restart your AppleTalk stack without rebooting
your machine. I hear that the GNU boycott of Apple is over, so
even politically correct people are allowed to say Y here.
source "drivers/net/appletalk/Kconfig"
......@@ -483,9 +468,7 @@ config X25
LLC" below) or LAPB over Ethernet (say Y to "LAPB Data Link Driver"
and "LAPB over Ethernet driver" below).
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
To compile this driver as a module, choose M here: the module
will be called x25. If unsure, say N.
config LAPB
......@@ -504,9 +487,7 @@ config LAPB
<file:Documentation/networking/lapb-module.txt> for technical
details.
If you want to compile this driver as a module though ( = code which
can be inserted in and removed from the running kernel whenever you
want), say M here and read <file:Documentation/modules.txt>. The
To compile this driver as a module, choose M here: the
module will be called lapb. If unsure, say N.
config NET_DIVERT
......@@ -550,10 +531,8 @@ config ECONET
to send Econet/AUN traffic over a UDP Ethernet connection or over
a native Econet network card.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called econet. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the module
will be called econet.
config ECONET_AUNUDP
bool "AUN over UDP"
......@@ -591,10 +570,8 @@ config WAN_ROUTER
Read <file:Documentation/networking/wan-router.txt> for more
information.
The WAN routing support is also available as a module called
wanrouter ( = code which can be inserted in and removed from the
running kernel whenever you want). If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile WAN routing support as a module, choose M here: the
module will be called wanrouter.
If unsure, say N.
......@@ -692,10 +669,8 @@ config NET_PKTGEN
Documentation on how to use the packet generaor can be found
at <file:Documentation/networking/pktgen.txt>.
This code is also available as a module called pktgen ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called pktgen.
endmenu
......
net/ax25/Kconfig
View file @ 77215b89
......@@ -48,10 +48,8 @@ config AX25
general is on the WWW at
<http://www.tapr.org/tapr/html/pkthome.html>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ax25. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called ax25.
config AX25_DAMA_SLAVE
bool "AX.25 DAMA Slave support"
......@@ -81,10 +79,8 @@ config NETROM
information about digital amateur radio in general is on the WWW at
<http://www.tapr.org/tapr/html/pkthome.html>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called netrom. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called netrom.
config ROSE
tristate "Amateur Radio X.25 PLP (Rose)"
......@@ -102,10 +98,8 @@ config ROSE
information about digital amateur radio in general is on the WWW at
<http://www.tapr.org/tapr/html/pkthome.html>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called rose. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
To compile this driver as a module, choose M here: the
module will be called rose.
menu "AX.25 network device drivers"
......
net/bridge/netfilter/Kconfig
View file @ 77215b89
......@@ -23,8 +23,7 @@ config BRIDGE_EBT_BROUTE
brouter. See the man page for ebtables(8) and examples on the ebtables
website.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_T_FILTER
tristate "ebt: filter table support"
......@@ -34,8 +33,7 @@ config BRIDGE_EBT_T_FILTER
local input, forwarding and local output. See the man page for
ebtables(8).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_T_NAT
tristate "ebt: nat table support"
......@@ -45,8 +43,7 @@ config BRIDGE_EBT_T_NAT
source address (MAC SNAT) or the MAC destination address (MAC DNAT).
See the man page for ebtables(8).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
#
# matches
#
......@@ -56,8 +53,7 @@ config BRIDGE_EBT_802_3
help
This option adds matching support for 802.3 Ethernet frames.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_ARP
tristate "ebt: ARP filter support"
......@@ -66,8 +62,7 @@ config BRIDGE_EBT_ARP
This option adds the ARP match, which allows ARP and RARP header field
filtering.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_IP
tristate "ebt: IP filter support"
......@@ -76,8 +71,7 @@ config BRIDGE_EBT_IP
This option adds the IP match, which allows basic IP header field
filtering.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_MARK
tristate "ebt: mark filter support"
......@@ -88,8 +82,7 @@ config BRIDGE_EBT_MARK
This value is the same as the one used in the iptables mark match and
target.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_PKTTYPE
tristate "ebt: packet type filter support"
......@@ -100,8 +93,7 @@ config BRIDGE_EBT_PKTTYPE
the generic networking code): broadcast, multicast,
for this host alone or for another host.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_STP
tristate "ebt: STP filter support"
......@@ -110,8 +102,7 @@ config BRIDGE_EBT_STP
This option adds the Spanning Tree Protocol match, which
allows STP header field filtering.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_VLAN
tristate "ebt: 802.1Q VLAN filter support"
......@@ -120,8 +111,7 @@ config BRIDGE_EBT_VLAN
This option adds the 802.1Q vlan match, which allows the filtering of
802.1Q vlan fields.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
#
# targets
#
......@@ -132,8 +122,7 @@ config BRIDGE_EBT_ARPREPLY
This option adds the arp reply target, which allows
automatically sending arp replies to arp requests.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_DNAT
tristate "ebt: dnat target support"
......@@ -142,8 +131,7 @@ config BRIDGE_EBT_DNAT
This option adds the MAC DNAT target, which allows altering the MAC
destination address of frames.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_MARK_T
tristate "ebt: mark target support"
......@@ -154,8 +142,7 @@ config BRIDGE_EBT_MARK_T
This value is the same as the one used in the iptables mark match and
target.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_REDIRECT
tristate "ebt: redirect target support"
......@@ -164,8 +151,7 @@ config BRIDGE_EBT_REDIRECT
This option adds the MAC redirect target, which allows altering the MAC
destination address of a frame to that of the device it arrived on.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config BRIDGE_EBT_SNAT
tristate "ebt: snat target support"
......@@ -174,8 +160,7 @@ config BRIDGE_EBT_SNAT
This option adds the MAC SNAT target, which allows altering the MAC
source address of frames.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
#
# watchers
#
......@@ -186,7 +171,6 @@ config BRIDGE_EBT_LOG
This option adds the log target, that you can use in any rule in
any ebtables table. It records the frame header to the syslog.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
endmenu
net/ipv4/ipvs/Kconfig
View file @ 77215b89
......@@ -23,9 +23,8 @@ config IP_VS
following URL:
http://www.linuxvirtualserver.org/
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_DEBUG
bool "IP virtual server debugging"
......@@ -103,9 +102,8 @@ config IP_VS_RR
The robin-robin scheduling algorithm simply directs network
connections to different real servers in a round-robin manner.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_WRR
tristate "weighted round-robin scheduling"
......@@ -118,9 +116,8 @@ config IP_VS_WRR
with higher weights get more connections than those with less
weights and servers with equal weights get equal connections.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_LC
tristate "least-connection scheduling scheduling"
......@@ -130,9 +127,8 @@ config IP_VS_LC
connections to the server with the least number of active
connections.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_WLC
tristate "weighted least-connection scheduling"
......@@ -142,9 +138,8 @@ config IP_VS_WLC
connections to the server with the least active connections
normalized by the server weight.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_LBLC
tristate "locality-based least-connection scheduling"
......@@ -158,9 +153,8 @@ config IP_VS_LBLC
and there is a server in its half load, then allocate the weighted
least-connection server to this IP address.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_LBLCR
tristate "locality-based least-connection with replication scheduling"
......@@ -178,9 +172,8 @@ config IP_VS_LBLCR
modified for the specified time, the most loaded node is removed
from the server set, in order to avoid high degree of replication.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_DH
tristate "destination hashing scheduling"
......@@ -190,9 +183,8 @@ config IP_VS_DH
connections to the servers through looking up a statically assigned
hash table by their destination IP addresses.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_SH
tristate "source hashing scheduling"
......@@ -202,9 +194,8 @@ config IP_VS_SH
connections to the servers through looking up a statically assigned
hash table by their source IP addresses.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_SED
tristate "shortest expected delay scheduling"
......@@ -217,9 +208,8 @@ config IP_VS_SED
on the the ith server and Ui is the fixed service rate (weight)
of the ith server.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
config IP_VS_NQ
tristate "never queue scheduling"
......@@ -232,9 +222,8 @@ config IP_VS_NQ
that minimize its expected delay (The Shortest Expected Delay
scheduling algorithm).
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
comment 'IPVS application helper'
depends on IP_VS
......@@ -250,8 +239,7 @@ config IP_VS_FTP
required for tracking the connection and mangling it back to that of
virtual service.
If you want to compile it in kernel, say Y. If you want to compile
it as a module, say M here and read Documentation/modules.txt. If
unsure, say N.
If you want to compile it in kernel, say Y. To compile it as a
module, choose M here. If unsure, say N.
endmenu
net/ipv4/netfilter/Kconfig
View file @ 77215b89
......@@ -17,8 +17,7 @@ config IP_NF_CONNTRACK
enhance packet filtering (see `Connection state match support'
below).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_FTP
tristate "FTP protocol support"
......@@ -28,8 +27,7 @@ config IP_NF_FTP
required for tracking them, and doing masquerading and other forms
of Network Address Translation on them.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `Y'.
To compile it as a module, choose M here. If unsure, say Y.
config IP_NF_IRC
tristate "IRC protocol support"
......@@ -44,8 +42,7 @@ config IP_NF_IRC
chats. Note that you do NOT need this extension to get files or
have others initiate chats, or everything else in IRC.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `Y'.
To compile it as a module, choose M here. If unsure, say Y.
config IP_NF_TFTP
tristate "TFTP protocol support"
......@@ -56,8 +53,7 @@ config IP_NF_TFTP
If you are using a tftp client behind -j SNAT or -j MASQUERADING
you will need this.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `Y'.
To compile it as a module, choose M here. If unsure, say Y.
config IP_NF_AMANDA
tristate "Amanda backup protocol support"
......@@ -70,8 +66,7 @@ config IP_NF_AMANDA
Amanda requires for communication of the backup data, messages and
index.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `Y'.
To compile it as a module, choose M here. If unsure, say Y.
config IP_NF_QUEUE
tristate "Userspace queueing via NETLINK"
......@@ -79,8 +74,7 @@ config IP_NF_QUEUE
Netfilter has the ability to queue packets to user space: the
netlink device can be used to access them using this driver.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_IPTABLES
tristate "IP tables support (required for filtering/masq/NAT)"
......@@ -90,8 +84,7 @@ config IP_NF_IPTABLES
etc) subsystems now use this: say `Y' or `M' here if you want to use
either of those.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# The simple matches.
config IP_NF_MATCH_LIMIT
......@@ -102,8 +95,7 @@ config IP_NF_MATCH_LIMIT
matched: mainly useful in combination with the LOG target ("LOG
target support", below) and to avoid some Denial of Service attacks.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_IPRANGE
tristate "IP range match support"
......@@ -112,8 +104,7 @@ config IP_NF_MATCH_IPRANGE
This option makes possible to match IP addresses against IP address
ranges.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_MAC
tristate "MAC address match support"
......@@ -122,8 +113,7 @@ config IP_NF_MATCH_MAC
MAC matching allows you to match packets based on the source
Ethernet address of the packet.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_PKTTYPE
tristate "Packet type match support"
......@@ -135,8 +125,7 @@ config IP_NF_MATCH_PKTTYPE
Typical usage:
iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_MARK
tristate "netfilter MARK match support"
......@@ -146,8 +135,7 @@ config IP_NF_MATCH_MARK
`nfmark' value in the packet. This can be set by the MARK target
(see below).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_MULTIPORT
tristate "Multiple port match support"
......@@ -157,8 +145,7 @@ config IP_NF_MATCH_MULTIPORT
a series of source or destination ports: normally a rule can only
match a single range of ports.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_TOS
tristate "TOS match support"
......@@ -167,8 +154,7 @@ config IP_NF_MATCH_TOS
TOS matching allows you to match packets based on the Type Of
Service fields of the IP packet.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_RECENT
tristate "recent match support"
......@@ -180,8 +166,7 @@ config IP_NF_MATCH_RECENT
Short options are available by using 'iptables -m recent -h'
Official Website: <http://snowman.net/projects/ipt_recent/>
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_ECN
tristate "ECN match support"
......@@ -190,8 +175,7 @@ config IP_NF_MATCH_ECN
This option adds a `ECN' match, which allows you to match against
the IPv4 and TCP header ECN fields.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_DSCP
tristate "DSCP match support"
......@@ -202,8 +186,7 @@ config IP_NF_MATCH_DSCP
The DSCP codepoint can have any value between 0x0 and 0x4f.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_AH_ESP
tristate "AH/ESP match support"
......@@ -212,8 +195,7 @@ config IP_NF_MATCH_AH_ESP
These two match extensions (`ah' and `esp') allow you to match a
range of SPIs inside AH or ESP headers of IPSec packets.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_LENGTH
tristate "LENGTH match support"
......@@ -222,8 +204,7 @@ config IP_NF_MATCH_LENGTH
This option allows you to match the length of a packet against a
specific value or range of values.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_TTL
tristate "TTL match support"
......@@ -232,8 +213,7 @@ config IP_NF_MATCH_TTL
This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
to match packets by their TTL value.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_TCPMSS
tristate "tcpmss match support"
......@@ -243,8 +223,7 @@ config IP_NF_MATCH_TCPMSS
MSS value of TCP SYN packets, which control the maximum packet size
for that connection.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_HELPER
tristate "Helper match support"
......@@ -253,8 +232,7 @@ config IP_NF_MATCH_HELPER
Helper matching allows you to match packets in dynamic connections
tracked by a conntrack-helper, ie. ip_conntrack_ftp
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `Y'.
To compile it as a module, choose M here. If unsure, say Y.
config IP_NF_MATCH_STATE
tristate "Connection state match support"
......@@ -264,8 +242,7 @@ config IP_NF_MATCH_STATE
relationship to a tracked connection (ie. previous packets). This
is a powerful tool for packet classification.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_CONNTRACK
tristate "Connection tracking match support"
......@@ -277,8 +254,7 @@ config IP_NF_MATCH_CONNTRACK
useful in complex configurations, such as NAT gateways with multiple
internet links or tunnels.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_OWNER
tristate "Owner match support"
......@@ -287,8 +263,7 @@ config IP_NF_MATCH_OWNER
Packet owner matching allows you to match locally-generated packets
based on who created them: the user, group, process or session.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_PHYSDEV
tristate "Physdev match support"
......@@ -297,8 +272,7 @@ config IP_NF_MATCH_PHYSDEV
Physdev packet matching matches against the physical bridge ports
the IP packet arrived on or will leave by.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# The targets
config IP_NF_FILTER
......@@ -309,8 +283,7 @@ config IP_NF_FILTER
rules for simple packet filtering at local input, forwarding and
local output. See the man page for iptables(8).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_REJECT
tristate "REJECT target support"
......@@ -320,8 +293,7 @@ config IP_NF_TARGET_REJECT
error should be issued in response to an incoming packet, rather
than silently being dropped.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_NAT
tristate "Full NAT"
......@@ -331,8 +303,7 @@ config IP_NF_NAT
forms of full Network Address Port Translation. It is controlled by
the `nat' table in iptables: see the man page for iptables(8).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_NAT_NEEDED
bool
......@@ -349,8 +320,7 @@ config IP_NF_TARGET_MASQUERADE
only useful for dialup accounts with dynamic IP address (ie. your IP
address will be different on next dialup).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_REDIRECT
tristate "REDIRECT target support"
......@@ -361,8 +331,7 @@ config IP_NF_TARGET_REDIRECT
come to the local machine instead of passing through. This is
useful for transparent proxies.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_NETMAP
tristate "NETMAP target support"
......@@ -373,8 +342,7 @@ config IP_NF_TARGET_NETMAP
address part intact. It is similar to Fast NAT, except that
Netfilter's connection tracking doesn't work well with Fast NAT.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_SAME
tristate "SAME target support"
......@@ -383,8 +351,7 @@ config IP_NF_TARGET_SAME
This option adds a `SAME' target, which works like the standard SNAT
target, but attempts to give clients the same IP for all connections.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_NAT_LOCAL
bool "NAT of local connections (READ HELP)"
......@@ -413,8 +380,7 @@ config IP_NF_NAT_SNMP_BASIC
This is the "basic" form of SNMP-ALG, as described in RFC 2962
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_NAT_IRC
tristate
......@@ -450,8 +416,7 @@ config IP_NF_MANGLE
iptables(8). This table is used for various packet alterations
which can effect how the packet is routed.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_TOS
tristate "TOS target support"
......@@ -461,8 +426,7 @@ config IP_NF_TARGET_TOS
the `mangle' table which alter the Type Of Service field of an IP
packet prior to routing.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_ECN
tristate "ECN target support"
......@@ -476,8 +440,7 @@ config IP_NF_TARGET_ECN
existing ECN blackholes on the internet, but don't want to disable
ECN support in general.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_DSCP
tristate "DSCP target support"
......@@ -488,8 +451,7 @@ config IP_NF_TARGET_DSCP
The DSCP codepoint can have any value between 0x0 and 0x4f.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_MARK
tristate "MARK target support"
......@@ -502,8 +464,7 @@ config IP_NF_TARGET_MARK
key') and can also be used by other subsystems to change their
behavior.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_CLASSIFY
tristate "CLASSIFY target support"
......@@ -515,8 +476,7 @@ config IP_NF_TARGET_CLASSIFY
atm, cbq, dsmark, pfifo_fast, htb, prio
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_LOG
tristate "LOG target support"
......@@ -525,8 +485,7 @@ config IP_NF_TARGET_LOG
This option adds a `LOG' target, which allows you to create rules in
any iptables table which records the packet header to the syslog.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_ULOG
tristate "ULOG target support"
......@@ -540,8 +499,7 @@ config IP_NF_TARGET_ULOG
The apropriate userspace logging daemon (ulogd) may be obtained from
http://www.gnumonks.org/projects/ulogd
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_TCPMSS
tristate "TCPMSS target support"
......@@ -567,8 +525,7 @@ config IP_NF_TARGET_TCPMSS
iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
-j TCPMSS --clamp-mss-to-pmtu
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_ARPTABLES
tristate "ARP tables support"
......@@ -595,8 +552,7 @@ config IP_NF_COMPAT_IPCHAINS
`Packet filtering'). With this enabled, you should be able to use
the ipchains tool exactly as in 2.2 kernels.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_COMPAT_IPFWADM
tristate "ipfwadm (2.0-style) support"
......@@ -608,8 +564,7 @@ config IP_NF_COMPAT_IPFWADM
`Packet filtering'). With this enabled, you should be able to use
the ipfwadm tool exactly as in 2.0 kernels.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
endmenu
net/ipv6/netfilter/Kconfig
View file @ 77215b89
......@@ -24,8 +24,7 @@ config IP6_NF_QUEUE
Universidad Politecnica de Alcala de Henares
email: fanton@it.uc3m.es
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_IPTABLES
tristate "IP6 tables support (required for filtering/masq/NAT)"
......@@ -35,8 +34,7 @@ config IP6_NF_IPTABLES
for IPv6 use this, but connection tracking is going to follow.
Say 'Y' or 'M' here if you want to use either of those.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# The simple matches.
config IP6_NF_MATCH_LIMIT
......@@ -47,8 +45,7 @@ config IP6_NF_MATCH_LIMIT
matched: mainly useful in combination with the LOG target ("LOG
target support", below) and to avoid some Denial of Service attacks.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_MAC
tristate "MAC address match support"
......@@ -57,8 +54,7 @@ config IP6_NF_MATCH_MAC
mac matching allows you to match packets based on the source
Ethernet address of the packet.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_RT
tristate "Routing header match support"
......@@ -67,8 +63,7 @@ config IP6_NF_MATCH_RT
rt matching allows you to match packets based on the routing
header of the packet.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_OPTS
tristate "Hop-by-hop and Dst opts header match support"
......@@ -77,8 +72,7 @@ config IP6_NF_MATCH_OPTS
This allows one to match packets based on the hop-by-hop
and destination options headers of a packet.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_FRAG
tristate "Fragmentation header match support"
......@@ -87,8 +81,7 @@ config IP6_NF_MATCH_FRAG
frag matching allows you to match packets based on the fragmentation
header of the packet.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_HL
tristate "HL match support"
......@@ -97,8 +90,7 @@ config IP6_NF_MATCH_HL
HL matching allows you to match packets based on the hop
limit of the packet.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_MULTIPORT
tristate "Multiple port match support"
......@@ -108,8 +100,7 @@ config IP6_NF_MATCH_MULTIPORT
a series of source or destination ports: normally a rule can only
match a single range of ports.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_OWNER
tristate "Owner match support"
......@@ -118,8 +109,7 @@ config IP6_NF_MATCH_OWNER
Packet owner matching allows you to match locally-generated packets
based on who created them: the user, group, process or session.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# dep_tristate ' MAC address match support' CONFIG_IP6_NF_MATCH_MAC $CONFIG_IP6_NF_IPTABLES
config IP6_NF_MATCH_MARK
......@@ -130,8 +120,7 @@ config IP6_NF_MATCH_MARK
`nfmark' value in the packet. This can be set by the MARK target
(see below).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_IPV6HEADER
tristate "IPv6 Extension Headers Match"
......@@ -140,8 +129,7 @@ config IP6_NF_MATCH_IPV6HEADER
This module allows one to match packets based upon
the ipv6 extension headers.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_AHESP
tristate "AH/ESP match support"
......@@ -149,8 +137,7 @@ config IP6_NF_MATCH_AHESP
help
This module allows one to match AH and ESP packets.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_LENGTH
tristate "Packet Length match support"
......@@ -159,8 +146,7 @@ config IP6_NF_MATCH_LENGTH
This option allows you to match the length of a packet against a
specific value or range of values.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_EUI64
tristate "EUI64 address check"
......@@ -170,8 +156,7 @@ config IP6_NF_MATCH_EUI64
Compares the last 64 bits with the EUI64 (delivered
from the MAC address) address
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# dep_tristate ' Multiple port match support' CONFIG_IP6_NF_MATCH_MULTIPORT $CONFIG_IP6_NF_IPTABLES
# dep_tristate ' TOS match support' CONFIG_IP6_NF_MATCH_TOS $CONFIG_IP6_NF_IPTABLES
......@@ -191,8 +176,7 @@ config IP6_NF_FILTER
rules for simple packet filtering at local input, forwarding and
local output. See the man page for iptables(8).
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_TARGET_LOG
tristate "LOG target support"
......@@ -201,8 +185,7 @@ config IP6_NF_TARGET_LOG
This option adds a `LOG' target, which allows you to create rules in
any iptables table which records the packet header to the syslog.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# if [ "$CONFIG_IP6_NF_FILTER" != "n" ]; then
# dep_tristate ' REJECT target support' CONFIG_IP6_NF_TARGET_REJECT $CONFIG_IP6_NF_FILTER
......@@ -218,8 +201,7 @@ config IP6_NF_MANGLE
iptables(8). This table is used for various packet alterations
which can effect how the packet is routed.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# dep_tristate ' TOS target support' CONFIG_IP6_NF_TARGET_TOS $CONFIG_IP_NF_MANGLE
config IP6_NF_TARGET_MARK
......@@ -233,8 +215,7 @@ config IP6_NF_TARGET_MARK
key') and can also be used by other subsystems to change their
behavior.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
#dep_tristate ' LOG target support' CONFIG_IP6_NF_TARGET_LOG $CONFIG_IP6_NF_IPTABLES
endmenu
......
net/irda/irlan/Kconfig
View file @ 77215b89
......@@ -2,10 +2,10 @@ config IRLAN
tristate "IrLAN protocol"
depends on IRDA
help
Say Y here if you want to build support for the IrLAN protocol. If
you want to compile it as a module (irlan), say M here and read
<file:Documentation/modules.txt>. IrLAN emulates an Ethernet and
makes it possible to put up a wireless LAN using infrared beams.
Say Y here if you want to build support for the IrLAN protocol.
To compile it as a module, choose M here: the module will be called
irlan. IrLAN emulates an Ethernet and makes it possible to put up
a wireless LAN using infrared beams.
The IrLAN protocol can be used to talk with infrared access points
like the HP NetbeamIR, or the ESI JetEye NET. You can also connect
......
net/sched/Kconfig
View file @ 77215b89
......@@ -21,10 +21,8 @@ config NET_SCH_CBQ
is a routine that allows you to sort your outgoing traffic into
classes based on a certain criterion.
This code is also available as a module called sch_cbq ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_cbq.
config NET_SCH_HTB
tristate "HTB packet scheduler"
......@@ -38,10 +36,8 @@ config NET_SCH_HTB
HTB is very similar to the CBQ regarding its goals however is has
different properties and different algorithm.
This code is also available as a module called sch_htb ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_htb.
config NET_SCH_CSZ
tristate "CSZ packet scheduler"
......@@ -55,10 +51,8 @@ config NET_SCH_CSZ
Note: this scheduler is currently broken.
This code is also available as a module called sch_csz ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_csz.
#tristate ' H-PFQ packet scheduler' CONFIG_NET_SCH_HPFQ
#tristate ' H-FSC packet scheduler' CONFIG_NET_SCH_HFCS
......@@ -72,10 +66,8 @@ config NET_SCH_ATM
the flow(s) it is handling to a given virtual circuit (see the top of
<file:net/sched/sch_atm.c>).
This code is also available as a module called sch_atm ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_atm.
config NET_SCH_PRIO
tristate "The simplest PRIO pseudoscheduler"
......@@ -85,10 +77,8 @@ config NET_SCH_PRIO
"scheduler" for some of your network devices or as a leaf discipline
for the CBQ scheduling algorithm. If unsure, say Y.
This code is also available as a module called sch_prio ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_prio.
config NET_SCH_RED
tristate "RED queue"
......@@ -99,10 +89,8 @@ config NET_SCH_RED
the top of <file:net/sched/sch_red.c> for details and references
about the algorithm).
This code is also available as a module called sch_red ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_red.
config NET_SCH_SFQ
tristate "SFQ queue"
......@@ -114,10 +102,8 @@ config NET_SCH_SFQ
<file:net/sched/sch_sfq.c> for details and references about the SFQ
algorithm).
This code is also available as a module called sch_sfq ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_sfq.
config NET_SCH_TEQL
tristate "TEQL queue"
......@@ -130,10 +116,8 @@ config NET_SCH_TEQL
one virtual device. (see the top of <file:net/sched/sch_teql.c> for
details).
This code is also available as a module called sch_teql ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_teql.
config NET_SCH_TBF
tristate "TBF queue"
......@@ -144,10 +128,8 @@ config NET_SCH_TBF
leaf discipline for the CBQ scheduling algorithm (see the top of
<file:net/sched/sch_tbf.c> for a description of the TBF algorithm).
This code is also available as a module called sch_tbf ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_tbf.
config NET_SCH_GRED
tristate "GRED queue"
......@@ -158,10 +140,8 @@ config NET_SCH_GRED
(see the top of <file:net/sched/sch_red.c> for details and
references about the algorithm).
This code is also available as a module called sch_gred ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_gred.
config NET_SCH_DSMARK
tristate "Diffserv field marker"
......@@ -172,10 +152,8 @@ config NET_SCH_DSMARK
Technical information on this method, with pointers to associated
RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.
This code is also available as a module called sch_dsmark ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called sch_dsmark.
config NET_SCH_INGRESS
tristate "Ingress Qdisc"
......@@ -185,10 +163,8 @@ config NET_SCH_INGRESS
and drop packets when this bandwidth exceeds your desired rate.
If unsure, say Y.
This code is also available as a module called cls_ingress
( = code which can be inserted in and removed from the running
kernel whenever you want). If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called cls_ingress.
config NET_QOS
bool "QoS support"
......@@ -240,10 +216,8 @@ config NET_CLS_TCINDEX
feature if you want to implement Differentiated Services using
sch_dsmark. If unsure, say Y.
This code is also available as a module called cls_tcindex
( = code which can be inserted in and removed from the running
kernel whenever you want). If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called cls_tcindex.
config NET_CLS_ROUTE4
tristate "Routing table based classifier"
......@@ -252,10 +226,8 @@ config NET_CLS_ROUTE4
If you say Y here, you will be able to classify outgoing packets
according to the route table entry they matched. If unsure, say Y.
This code is also available as a module called cls_route ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called cls_route.
config NET_CLS_ROUTE
bool
......@@ -269,10 +241,8 @@ config NET_CLS_FW
If you say Y here, you will be able to classify outgoing packets
according to firewall criteria you specified.
This code is also available as a module called cls_fw ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called cls_fw.
config NET_CLS_U32
tristate "U32 classifier"
......@@ -281,10 +251,8 @@ config NET_CLS_U32
If you say Y here, you will be able to classify outgoing packets
according to their destination address. If unsure, say Y.
This code is also available as a module called cls_u32 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called cls_u32.
config NET_CLS_RSVP
tristate "Special RSVP classifier"
......@@ -297,10 +265,8 @@ config NET_CLS_RSVP
Say Y here if you want to be able to classify outgoing packets based
on their RSVP requests.
This code is also available as a module called cls_rsvp ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called cls_rsvp.
config NET_CLS_RSVP6
tristate "Special RSVP classifier for IPv6"
......@@ -314,10 +280,8 @@ config NET_CLS_RSVP6
on their RSVP requests and you are using the new Internet Protocol
IPv6 as opposed to the older and more common IPv4.
This code is also available as a module called cls_rsvp6 ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
To compile this code as a module, choose M here: the
module will be called cls_rsvp6.
config NET_CLS_POLICE
bool "Traffic policing (needed for in/egress)"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7