qtnfmac: convert channel width from bitfiled to simple enum

This will allow to use qlink channel width values to specify BW setting
corresponding to enum nl80211_chan_width.
Current user is converted to apply BIT() macro manually to each individual
qlink_channel_width enumeration value.
Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/quantenna/qtnfmac/qlink.h

@@ -108,14 +108,14 @@ enum qlink_sta_flags {
 };
 
 enum qlink_channel_width {
-	QLINK_CHAN_WIDTH_5		= BIT(0),
-	QLINK_CHAN_WIDTH_10		= BIT(1),
-	QLINK_CHAN_WIDTH_20_NOHT	= BIT(2),
-	QLINK_CHAN_WIDTH_20		= BIT(3),
-	QLINK_CHAN_WIDTH_40		= BIT(4),
-	QLINK_CHAN_WIDTH_80		= BIT(5),
-	QLINK_CHAN_WIDTH_80P80		= BIT(6),
-	QLINK_CHAN_WIDTH_160		= BIT(7),
+	QLINK_CHAN_WIDTH_5 = 0,
+	QLINK_CHAN_WIDTH_10,
+	QLINK_CHAN_WIDTH_20_NOHT,
+	QLINK_CHAN_WIDTH_20,
+	QLINK_CHAN_WIDTH_40,
+	QLINK_CHAN_WIDTH_80,
+	QLINK_CHAN_WIDTH_80P80,
+	QLINK_CHAN_WIDTH_160,
 };
 
 /* QLINK Command messages related definitions

drivers/net/wireless/quantenna/qtnfmac/qlink_util.c

@@ -49,28 +49,28 @@ u8 qlink_chan_width_mask_to_nl(u16 qlink_mask)
 {
 	u8 result = 0;
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_5)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_5))
 		result |= BIT(NL80211_CHAN_WIDTH_5);
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_10)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_10))
 		result |= BIT(NL80211_CHAN_WIDTH_10);
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_20_NOHT)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_20_NOHT))
 		result |= BIT(NL80211_CHAN_WIDTH_20_NOHT);
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_20)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_20))
 		result |= BIT(NL80211_CHAN_WIDTH_20);
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_40)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_40))
 		result |= BIT(NL80211_CHAN_WIDTH_40);
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_80)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_80))
 		result |= BIT(NL80211_CHAN_WIDTH_80);
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_80P80)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_80P80))
 		result |= BIT(NL80211_CHAN_WIDTH_80P80);
 
-	if (qlink_mask & QLINK_CHAN_WIDTH_160)
+	if (qlink_mask & BIT(QLINK_CHAN_WIDTH_160))
 		result |= BIT(NL80211_CHAN_WIDTH_160);
 
 	return result;