Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jussi Brar:
 "Broadcom:
   - New PDC controller driver and bindings

  Misc:
   - PL320 - Convert from 'raw' IO to 'relaxed' version
   - Test - fix dangling pointer"

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Fix format and type mismatches in Broadcom PDC driver
  mailbox: Add Broadcom PDC mailbox driver
  dt-bindings: add bindings documentation for PDC driver.
  mailbox: pl320: remove __raw IO
  mailbox: mailbox-test: set tdev->signal to NULL after freeing

Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt

+The PDC driver manages data transfer to and from various offload engines
+on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is
+one device tree entry per block.
+
+Required properties:
+- compatible : Should be "brcm,iproc-pdc-mbox".
+- reg: Should contain PDC registers location and length.
+- interrupts: Should contain the IRQ line for the PDC.
+- #mbox-cells: 1
+- brcm,rx-status-len: Length of metadata preceding received frames, in bytes.
+
+Optional properties:
+- brcm,use-bcm-hdr:  present if a BCM header precedes each frame.
+
+Example:
+	pdc0: iproc-pdc0@0x612c0000 {
+		compatible = "brcm,iproc-pdc-mbox";
+		reg = <0 0x612c0000 0 0x445>;  /* PDC FS0 regs */
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;   /* one cell per mailbox channel */
+		brcm,rx-status-len = <32>;
+		brcm,use-bcm-hdr;
+	};

drivers/mailbox/Kconfig

@@ -123,4 +123,13 @@ config XGENE_SLIMPRO_MBOX
 	  It is used to send short messages between ARM64-bit cores and
 	  the SLIMpro Management Engine, primarily for PM. Say Y here if you
 	  want to use the APM X-Gene SLIMpro IPCM support.
+
+config BCM_PDC_MBOX
+	tristate "Broadcom PDC Mailbox"
+	depends on ARM64 || COMPILE_TEST
+	default ARCH_BCM_IPROC
+	help
+	  Mailbox implementation for the Broadcom PDC ring manager,
+	  which provides access to various offload engines on Broadcom
+	  SoCs. Say Y here if you want to use the Broadcom PDC.
 endif

drivers/mailbox/Makefile

@@ -25,3 +25,5 @@ obj-$(CONFIG_TI_MESSAGE_MANAGER) += ti-msgmgr.o
 obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
 
 obj-$(CONFIG_HI6220_MBOX)	+= hi6220-mailbox.o
+
+obj-$(CONFIG_BCM_PDC_MBOX)	+= bcm-pdc-mailbox.o

drivers/mailbox/mailbox-test.c

@@ -133,6 +133,7 @@ static ssize_t mbox_test_message_write(struct file *filp,
 out:
 	kfree(tdev->signal);
 	kfree(tdev->message);
+	tdev->signal = NULL;
 
 	return ret < 0 ? ret : count;
 }

drivers/mailbox/pl320-ipc.c

@@ -58,29 +58,29 @@ static ATOMIC_NOTIFIER_HEAD(ipc_notifier);
 
 static inline void set_destination(int source, int mbox)
 {
-	__raw_writel(CHAN_MASK(source), ipc_base + IPCMxDSET(mbox));
-	__raw_writel(CHAN_MASK(source), ipc_base + IPCMxMSET(mbox));
+	writel_relaxed(CHAN_MASK(source), ipc_base + IPCMxDSET(mbox));
+	writel_relaxed(CHAN_MASK(source), ipc_base + IPCMxMSET(mbox));
 }
 
 static inline void clear_destination(int source, int mbox)
 {
-	__raw_writel(CHAN_MASK(source), ipc_base + IPCMxDCLEAR(mbox));
-	__raw_writel(CHAN_MASK(source), ipc_base + IPCMxMCLEAR(mbox));
+	writel_relaxed(CHAN_MASK(source), ipc_base + IPCMxDCLEAR(mbox));
+	writel_relaxed(CHAN_MASK(source), ipc_base + IPCMxMCLEAR(mbox));
 }
 
 static void __ipc_send(int mbox, u32 *data)
 {
 	int i;
 	for (i = 0; i < 7; i++)
-		__raw_writel(data[i], ipc_base + IPCMxDR(mbox, i));
-	__raw_writel(0x1, ipc_base + IPCMxSEND(mbox));
+		writel_relaxed(data[i], ipc_base + IPCMxDR(mbox, i));
+	writel_relaxed(0x1, ipc_base + IPCMxSEND(mbox));
 }
 
 static u32 __ipc_rcv(int mbox, u32 *data)
 {
 	int i;
 	for (i = 0; i < 7; i++)
-		data[i] = __raw_readl(ipc_base + IPCMxDR(mbox, i));
+		data[i] = readl_relaxed(ipc_base + IPCMxDR(mbox, i));
 	return data[1];
 }
 
@@ -112,15 +112,15 @@ static irqreturn_t ipc_handler(int irq, void *dev)
 	u32 irq_stat;
 	u32 data[7];
 
-	irq_stat = __raw_readl(ipc_base + IPCMMIS(1));
+	irq_stat = readl_relaxed(ipc_base + IPCMMIS(1));
 	if (irq_stat & MBOX_MASK(IPC_TX_MBOX)) {
-		__raw_writel(0, ipc_base + IPCMxSEND(IPC_TX_MBOX));
+		writel_relaxed(0, ipc_base + IPCMxSEND(IPC_TX_MBOX));
 		complete(&ipc_completion);
 	}
 	if (irq_stat & MBOX_MASK(IPC_RX_MBOX)) {
 		__ipc_rcv(IPC_RX_MBOX, data);
 		atomic_notifier_call_chain(&ipc_notifier, data[0], data + 1);
-		__raw_writel(2, ipc_base + IPCMxSEND(IPC_RX_MBOX));
+		writel_relaxed(2, ipc_base + IPCMxSEND(IPC_RX_MBOX));
 	}
 
 	return IRQ_HANDLED;
@@ -146,7 +146,7 @@ static int pl320_probe(struct amba_device *adev, const struct amba_id *id)
 	if (ipc_base == NULL)
 		return -ENOMEM;
 
-	__raw_writel(0, ipc_base + IPCMxSEND(IPC_TX_MBOX));
+	writel_relaxed(0, ipc_base + IPCMxSEND(IPC_TX_MBOX));
 
 	ipc_irq = adev->irq[0];
 	ret = request_irq(ipc_irq, ipc_handler, 0, dev_name(&adev->dev), NULL);
@@ -154,19 +154,19 @@ static int pl320_probe(struct amba_device *adev, const struct amba_id *id)
 		goto err;
 
 	/* Init slow mailbox */
-	__raw_writel(CHAN_MASK(A9_SOURCE),
+	writel_relaxed(CHAN_MASK(A9_SOURCE),
 		       ipc_base + IPCMxSOURCE(IPC_TX_MBOX));
-	__raw_writel(CHAN_MASK(M3_SOURCE),
+	writel_relaxed(CHAN_MASK(M3_SOURCE),
 		       ipc_base + IPCMxDSET(IPC_TX_MBOX));
-	__raw_writel(CHAN_MASK(M3_SOURCE) | CHAN_MASK(A9_SOURCE),
+	writel_relaxed(CHAN_MASK(M3_SOURCE) | CHAN_MASK(A9_SOURCE),
 		       ipc_base + IPCMxMSET(IPC_TX_MBOX));
 
 	/* Init receive mailbox */
-	__raw_writel(CHAN_MASK(M3_SOURCE),
+	writel_relaxed(CHAN_MASK(M3_SOURCE),
 		       ipc_base + IPCMxSOURCE(IPC_RX_MBOX));
-	__raw_writel(CHAN_MASK(A9_SOURCE),
+	writel_relaxed(CHAN_MASK(A9_SOURCE),
 		       ipc_base + IPCMxDSET(IPC_RX_MBOX));
-	__raw_writel(CHAN_MASK(M3_SOURCE) | CHAN_MASK(A9_SOURCE),
+	writel_relaxed(CHAN_MASK(M3_SOURCE) | CHAN_MASK(A9_SOURCE),
 		       ipc_base + IPCMxMSET(IPC_RX_MBOX));
 
 	return 0;

include/linux/mailbox/brcm-message.h

+/*
+ *  Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common header for Broadcom mailbox messages which is shared across
+ * Broadcom SoCs and Broadcom mailbox client drivers.
+ */
+
+#ifndef _LINUX_BRCM_MESSAGE_H_
+#define _LINUX_BRCM_MESSAGE_H_
+
+#include <linux/scatterlist.h>
+
+enum brcm_message_type {
+	BRCM_MESSAGE_UNKNOWN = 0,
+	BRCM_MESSAGE_SPU,
+	BRCM_MESSAGE_SBA,
+	BRCM_MESSAGE_MAX,
+};
+
+struct brcm_sba_command {
+	u64 cmd;
+#define BRCM_SBA_CMD_TYPE_A		BIT(0)
+#define BRCM_SBA_CMD_TYPE_B		BIT(1)
+#define BRCM_SBA_CMD_TYPE_C		BIT(2)
+#define BRCM_SBA_CMD_HAS_RESP		BIT(3)
+#define BRCM_SBA_CMD_HAS_OUTPUT		BIT(4)
+	u64 flags;
+	dma_addr_t input;
+	size_t input_len;
+	dma_addr_t resp;
+	size_t resp_len;
+	dma_addr_t output;
+	size_t output_len;
+};
+
+struct brcm_message {
+	enum brcm_message_type type;
+	union {
+		struct {
+			struct scatterlist *src;
+			struct scatterlist *dst;
+		} spu;
+		struct {
+			struct brcm_sba_command *cmds;
+			unsigned int cmds_count;
+		} sba;
+	};
+	void *ctx;
+	int error;
+};
+
+#endif /* _LINUX_BRCM_MESSAGE_H_ */