dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAML

Convert Xilinx CAN binding documentation to YAML.

Link: https://lore.kernel.org/all/20220316171105.17654-1-amit.kumar-mahapatra@xilinx.comSigned-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Documentation/devicetree/bindings/net/can/xilinx,can.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Xilinx Axi CAN/Zynq CANPS controller
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynq-can-1.0
+      - xlnx,axi-can-1.00.a
+      - xlnx,canfd-1.0
+      - xlnx,canfd-2.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  tx-fifo-depth:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Tx fifo depth (Zynq, Axi CAN).
+
+  rx-fifo-depth:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode)
+
+  tx-mailbox-count:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Tx mailbox buffer count (CAN FD)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynq-can-1.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: pclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,axi-can-1.00.a
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,canfd-1.0
+              - xlnx,canfd-2.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-mailbox-count
+        - rx-fifo-depth
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    can@e0008000 {
+        compatible = "xlnx,zynq-can-1.0";
+        reg = <0xe0008000 0x1000>;
+        clocks = <&clkc 19>, <&clkc 36>;
+        clock-names = "can_clk", "pclk";
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&intc>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,axi-can-1.00.a";
+        reg = <0x40000000 0x10000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,canfd-1.0";
+        reg = <0x40000000 0x2000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x20>;
+    };
+
+  - |
+    can@ff060000 {
+        compatible = "xlnx,canfd-2.0";
+        reg = <0xff060000 0x6000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x40>;
+    };

Documentation/devicetree/bindings/net/can/xilinx_can.txt

-Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Should be:
-			  - "xlnx,zynq-can-1.0" for Zynq CAN controllers
-			  - "xlnx,axi-can-1.00.a" for Axi CAN controllers
-			  - "xlnx,canfd-1.0" for CAN FD controllers
-			  - "xlnx,canfd-2.0" for CAN FD 2.0 controllers
-- reg			: Physical base address and size of the controller
-			  registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names
-			  - "can_clk", "pclk" (For CANPS),
-			  - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-- tx-fifo-depth		: Can Tx fifo depth (Zynq, Axi CAN).
-- rx-fifo-depth		: Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
-                          sequential Rx mode).
-- tx-mailbox-count	: Can Tx mailbox buffer count (CAN FD).
-- rx-mailbox-count	: Can Rx mailbox buffer count (CAN FD in mailbox Rx
-			  mode).
-
-
-Example:
-
-For Zynq CANPS Dts file:
-	zynq_can_0: can@e0008000 {
-			compatible = "xlnx,zynq-can-1.0";
-			clocks = <&clkc 19>, <&clkc 36>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0008000 0x1000>;
-			interrupts = <0 28 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For Axi CAN Dts file:
-	axi_can_0: axi-can@40000000 {
-			compatible = "xlnx,axi-can-1.00.a";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk","s_axi_aclk" ;
-			reg = <0x40000000 0x10000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For CAN FD Dts file:
-	canfd_0: canfd@40000000 {
-			compatible = "xlnx,canfd-1.0";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk", "s_axi_aclk";
-			reg = <0x40000000 0x2000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-mailbox-count = <0x20>;
-			rx-fifo-depth = <0x20>;
-		};