clk: meson-axg: add clock controller drivers

Add clock controller drivers for Amlogic Meson-AXG SoC.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

arch/arm64/Kconfig.platforms

@@ -105,6 +105,7 @@ config ARCH_MESON
 	select PINCTRL_MESON
 	select COMMON_CLK_AMLOGIC
 	select COMMON_CLK_GXBB
+	select COMMON_CLK_AXG
 	select MESON_IRQ_GPIO
 	help
 	  This enables support for the Amlogic S905 SoCs.

drivers/clk/meson/Kconfig

@@ -19,3 +19,11 @@ config COMMON_CLK_GXBB
 	help
 	  Support for the clock controller on AmLogic S905 devices, aka gxbb.
 	  Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+	bool
+	depends on COMMON_CLK_AMLOGIC
+	select RESET_CONTROLLER
+	help
+	  Support for the clock controller on AmLogic A113D devices, aka axg.
+	  Say Y if you want peripherals and CPU frequency scaling to work.

drivers/clk/meson/Makefile

@@ -5,3 +5,4 @@
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o

drivers/clk/meson/axg.h

+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL		0x40
+#define HHI_GP0_PLL_CNTL2		0x44
+#define HHI_GP0_PLL_CNTL3		0x48
+#define HHI_GP0_PLL_CNTL4		0x4c
+#define HHI_GP0_PLL_CNTL5		0x50
+#define HHI_GP0_PLL_STS			0x54
+#define HHI_GP0_PLL_CNTL1		0x58
+#define HHI_HIFI_PLL_CNTL		0x80
+#define HHI_HIFI_PLL_CNTL2		0x84
+#define HHI_HIFI_PLL_CNTL3		0x88
+#define HHI_HIFI_PLL_CNTL4		0x8C
+#define HHI_HIFI_PLL_CNTL5		0x90
+#define HHI_HIFI_PLL_STS		0x94
+#define HHI_HIFI_PLL_CNTL1		0x98
+
+#define HHI_XTAL_DIVN_CNTL		0xbc
+#define HHI_GCLK2_MPEG0			0xc0
+#define HHI_GCLK2_MPEG1			0xc4
+#define HHI_GCLK2_MPEG2			0xc8
+#define HHI_GCLK2_OTHER			0xd0
+#define HHI_GCLK2_AO			0xd4
+#define HHI_PCIE_PLL_CNTL		0xd8
+#define HHI_PCIE_PLL_CNTL1		0xdC
+#define HHI_PCIE_PLL_CNTL2		0xe0
+#define HHI_PCIE_PLL_CNTL3		0xe4
+#define HHI_PCIE_PLL_CNTL4		0xe8
+#define HHI_PCIE_PLL_CNTL5		0xec
+#define HHI_PCIE_PLL_CNTL6		0xf0
+#define HHI_PCIE_PLL_STS		0xf4
+
+#define HHI_MEM_PD_REG0			0x100
+#define HHI_VPU_MEM_PD_REG0		0x104
+#define HHI_VIID_CLK_DIV		0x128
+#define HHI_VIID_CLK_CNTL		0x12c
+
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_GCLK_AO			0x154
+#define HHI_SYS_CPU_CLK_CNTL1		0x15c
+#define HHI_SYS_CPU_RESET_CNTL		0x160
+#define HHI_VID_CLK_DIV			0x164
+#define HHI_SPICC_HCLK_CNTL		0x168
+
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c
+#define HHI_VID_PLL_CLK_DIV		0x1a0
+#define HHI_VPU_CLK_CNTL		0x1bC
+
+#define HHI_VAPBCLK_CNTL		0x1F4
+
+#define HHI_GEN_CLK_CNTL		0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL		0x250
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL		0x264
+
+#define HHI_MPLL_CNTL			0x280
+#define HHI_MPLL_CNTL2			0x284
+#define HHI_MPLL_CNTL3			0x288
+#define HHI_MPLL_CNTL4			0x28C
+#define HHI_MPLL_CNTL5			0x290
+#define HHI_MPLL_CNTL6			0x294
+#define HHI_MPLL_CNTL7			0x298
+#define HHI_MPLL_CNTL8			0x29C
+#define HHI_MPLL_CNTL9			0x2A0
+#define HHI_MPLL_CNTL10			0x2A4
+
+#define HHI_MPLL3_CNTL0			0x2E0
+#define HHI_MPLL3_CNTL1			0x2E4
+#define HHI_PLL_TOP_MISC		0x2E8
+
+#define HHI_SYS_PLL_CNTL1		0x2FC
+#define HHI_SYS_PLL_CNTL		0x300
+#define HHI_SYS_PLL_CNTL2		0x304
+#define HHI_SYS_PLL_CNTL3		0x308
+#define HHI_SYS_PLL_CNTL4		0x30c
+#define HHI_SYS_PLL_CNTL5		0x310
+#define HHI_SYS_PLL_STS			0x314
+#define HHI_DPLL_TOP_I			0x318
+#define HHI_DPLL_TOP2_I			0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL		61
+#define CLKID_SD_EMMC_B_CLK0_DIV		62
+#define CLKID_SD_EMMC_C_CLK0_SEL		63
+#define CLKID_SD_EMMC_C_CLK0_DIV		64
+
+#define NR_CLKS					65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */