Commit 7990b0d7 authored by Marc Dietrich's avatar Marc Dietrich Committed by Greg Kroah-Hartman

staging: nvec: add device tree support

This adds device tree support to the nvec driver. By using this method
it is no longer necessary to specify platform data through a board
file.
Signed-off-by: default avatarMarc Dietrich <marvin24@gmx.de>
Acked-by: default avatarStephen Warren <swarren@nvidia.com>
Cc: Julian Andres Klode <jak@jak-linux.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: default avatarOlof Johansson <olof@lixom.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent d9f26a66
NVIDIA compliant embedded controller
Required properties:
- compatible : should be "nvidia,nvec".
- reg : the iomem of the i2c slave controller
- interrupts : the interrupt line of the i2c slave controller
- clock-frequency : the frequency of the i2c bus
- gpios : the gpio used for ec request
- slave-addr: the i2c address of the slave controller
...@@ -27,6 +27,8 @@ ...@@ -27,6 +27,8 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/mfd/core.h> #include <linux/mfd/core.h>
#include <linux/mutex.h> #include <linux/mutex.h>
...@@ -727,8 +729,24 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev) ...@@ -727,8 +729,24 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev)
} }
platform_set_drvdata(pdev, nvec); platform_set_drvdata(pdev, nvec);
nvec->dev = &pdev->dev; nvec->dev = &pdev->dev;
if (pdata) {
nvec->gpio = pdata->gpio; nvec->gpio = pdata->gpio;
nvec->i2c_addr = pdata->i2c_addr; nvec->i2c_addr = pdata->i2c_addr;
} else if (nvec->dev->of_node) {
nvec->gpio = of_get_named_gpio(nvec->dev->of_node, "request-gpios", 0);
if (nvec->gpio < 0) {
dev_err(&pdev->dev, "no gpio specified");
goto failed;
}
if (of_property_read_u32(nvec->dev->of_node, "slave-addr", &nvec->i2c_addr)) {
dev_err(&pdev->dev, "no i2c address specified");
goto failed;
}
} else {
dev_err(&pdev->dev, "no platform data\n");
goto failed;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) { if (!res) {
...@@ -893,6 +911,13 @@ static int tegra_nvec_resume(struct platform_device *pdev) ...@@ -893,6 +911,13 @@ static int tegra_nvec_resume(struct platform_device *pdev)
#define tegra_nvec_resume NULL #define tegra_nvec_resume NULL
#endif #endif
/* Match table for of_platform binding */
static const struct of_device_id nvidia_nvec_of_match[] __devinitconst = {
{ .compatible = "nvidia,nvec", },
{},
};
MODULE_DEVICE_TABLE(of, nvidia_nvec_of_match);
static struct platform_driver nvec_device_driver = { static struct platform_driver nvec_device_driver = {
.probe = tegra_nvec_probe, .probe = tegra_nvec_probe,
.remove = __devexit_p(tegra_nvec_remove), .remove = __devexit_p(tegra_nvec_remove),
...@@ -901,6 +926,7 @@ static struct platform_driver nvec_device_driver = { ...@@ -901,6 +926,7 @@ static struct platform_driver nvec_device_driver = {
.driver = { .driver = {
.name = "nvec", .name = "nvec",
.owner = THIS_MODULE, .owner = THIS_MODULE,
.of_match_table = nvidia_nvec_of_match,
} }
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment