Merge tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC support for Tegra platforms from Olof Johansson:
 "Here's a single-SoC topic branch that we've staged separately.  Mainly
  because it was hard to sort the branch contents in a way that fit our
  existing branches due to some refactorings.

  The code has been in -next for quite a while, but we staged it in
  arm-soc a bit late, which is why we've kept it separate from the other
  updates and are sending it separately here"

* tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support
  arm64: tegra: Add NVIDIA P2597 I/O board support
  arm64: tegra: Add NVIDIA Jetson TX1 support
  arm64: tegra: Add NVIDIA P2571 board support
  arm64: tegra: Add NVIDIA P2371 board support
  arm64: tegra: Add NVIDIA P2595 I/O board support
  arm64: tegra: Add NVIDIA P2530 main board support
  arm64: tegra: Add Tegra210 support
  arm64: tegra: Add NVIDIA Tegra132 Norrin support
  arm64: tegra: Add Tegra132 support
  ARM: tegra: select USB_ULPI from EHCI rather than platform
  ARM: tegra: Ensure entire dcache is flushed on entering LP0/1
  amba: Hide TEGRA_AHB symbol
  soc/tegra: Add Tegra210 support
  soc/tegra: Provide per-SoC Kconfig symbols

arch/arm/mach-tegra/Kconfig

@@ -13,57 +13,5 @@ menuconfig ARCH_TEGRA
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 	select SOC_BUS
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  This enables support for NVIDIA Tegra based systems.
-
-if ARCH_TEGRA
-
-config ARCH_TEGRA_2x_SOC
-	bool "Enable support for Tegra20 family"
-	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
-	select ARM_ERRATA_720789
-	select ARM_ERRATA_754327 if SMP
-	select ARM_ERRATA_764369 if SMP
-	select PINCTRL_TEGRA20
-	select PL310_ERRATA_727915 if CACHE_L2X0
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config ARCH_TEGRA_3x_SOC
-	bool "Enable support for Tegra30 family"
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
-	select PINCTRL_TEGRA30
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T30 processor family, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config ARCH_TEGRA_114_SOC
-	bool "Enable support for Tegra114 family"
-	select ARM_ERRATA_798181 if SMP
-	select ARM_L1_CACHE_SHIFT_6
-	select HAVE_ARM_ARCH_TIMER
-	select PINCTRL_TEGRA114
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T114 processor family, based on the
-	  ARM CortexA15MP CPU
-
-config ARCH_TEGRA_124_SOC
-	bool "Enable support for Tegra124 family"
-	select ARM_L1_CACHE_SHIFT_6
-	select HAVE_ARM_ARCH_TIMER
-	select PINCTRL_TEGRA124
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T124 processor family, based on the
-	  ARM CortexA15MP CPU
-
-endif

arch/arm/mach-tegra/sleep-tegra20.S

@@ -231,8 +231,11 @@ ENDPROC(tegra20_cpu_is_resettable_soon)
  * tegra20_tear_down_core in IRAM
  */
 ENTRY(tegra20_sleep_core_finish)
+	mov     r4, r0
 	/* Flush, disable the L1 data cache and exit SMP */
+	mov     r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
+	mov     r0, r4
 
 	mov32	r3, tegra_shut_off_mmu
 	add	r3, r3, r0

arch/arm/mach-tegra/sleep-tegra30.S

@@ -242,8 +242,11 @@ ENDPROC(tegra30_cpu_shutdown)
  * tegra30_tear_down_core in IRAM
  */
 ENTRY(tegra30_sleep_core_finish)
+	mov	r4, r0
 	/* Flush, disable the L1 data cache and exit SMP */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
+	mov	r0, r4
 
 	/*
 	 * Preload all the address literals that are needed for the

arch/arm64/Kconfig.platforms

@@ -105,18 +105,6 @@ config ARCH_TEGRA
 	help
 	  This enables support for the NVIDIA Tegra SoC family.
 
-config ARCH_TEGRA_132_SOC
-	bool "NVIDIA Tegra132 SoC"
-	depends on ARCH_TEGRA
-	select PINCTRL_TEGRA124
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
-	help
-	  Enable support for NVIDIA Tegra132 SoC, based on the Denver
-	  ARMv8 CPU.  The Tegra132 SoC is similar to the Tegra124 SoC,
-	  but contains an NVIDIA Denver CPU complex in place of
-	  Tegra124's "4+1" Cortex-A15 CPU complex.
-
 config ARCH_SPRD
 	bool "Spreadtrum SoC platform"
 	help

arch/arm64/boot/dts/Makefile

@@ -9,6 +9,7 @@ dts-dirs += freescale
 dts-dirs += hisilicon
 dts-dirs += marvell
 dts-dirs += mediatek
+dts-dirs += nvidia
 dts-dirs += qcom
 dts-dirs += renesas
 dts-dirs += rockchip

arch/arm64/boot/dts/nvidia/Makefile

+dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+
+always		:= $(dtb-y)
+clean-files	:= *.dtb

arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi

+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1";
+	compatible = "nvidia,p2180", "nvidia,tegra210";
+
+	aliases {
+		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	/* debug port */
+	serial@0,70006000 {
+		status = "okay";
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};

arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts

+/dts-v1/;
+
+#include "tegra210-p2530.dtsi"
+#include "tegra210-p2595.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2371 (P2530/P2595) reference design";
+	compatible = "nvidia,p2371-0000", "nvidia,tegra210";
+};

arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts

+/dts-v1/;
+
+#include "tegra210-p2180.dtsi"
+#include "tegra210-p2597.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1 Developer Kit";
+	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+};

arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi

+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2530 main board";
+	compatible = "nvidia,p2530", "nvidia,tegra210";
+
+	aliases {
+		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	/* debug port */
+	serial@0,70006000 {
+		status = "okay";
+	};
+
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};

drivers/amba/Kconfig

@@ -4,7 +4,7 @@ config ARM_AMBA
 if ARM_AMBA
 
 config TEGRA_AHB
-	bool "Enable AHB driver for NVIDIA Tegra SoCs"
+	bool
 	default y if ARCH_TEGRA
 	help
 	  Adds AHB configuration functionality for NVIDIA Tegra SoCs,

drivers/soc/Kconfig

@@ -7,6 +7,7 @@ source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/rockchip/Kconfig"
 source "drivers/soc/sunxi/Kconfig"
+source "drivers/soc/tegra/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/versatile/Kconfig"
 

drivers/usb/host/Kconfig

@@ -229,6 +229,8 @@ config USB_EHCI_TEGRA
        depends on ARCH_TEGRA
        select USB_EHCI_ROOT_HUB_TT
        select USB_PHY
+	select USB_ULPI
+	select USB_ULPI_VIEWPORT
        help
          This driver enables support for the internal USB Host Controllers
          found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.