Commit 7a888e14 authored by Yang Xiwen's avatar Yang Xiwen Committed by Bjorn Andersson

arm64: dts: qcom: msm8916-yiming-uz801v3: Add initial device tree

This commit adds support for the uz801 v3.0 WiFi/LTE dongle made by
Henan Yiming Technology Co., Ltd. based on MSM8916.

Note: The original firmware does not support 64-bit OS. It is necessary
to flash 64-bit TZ firmware to boot arm64.

Currently supported:
- All CPU cores
- Buttons
- LEDs
- Modem
- SDHC
- USB Device Mode
- UART
Signed-off-by: default avatarYang Xiwen <forbidden405@foxmail.com>
Reviewed-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/tencent_62395CA0D608DD0078DD3D889F6E4E22BA05@qq.com
parent 32444424
......@@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
......
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8916-ufi.dtsi"
/ {
model = "uz801 v3.0 4G Modem Stick";
compatible = "yiming,uz801-v3", "qcom,msm8916";
};
&button_restart {
gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>;
};
&led_r {
gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>;
};
&led_g {
gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
};
&led_b {
gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>;
};
&button_default {
pins = "gpio23";
bias-pull-up;
};
&gpio_leds_default {
pins = "gpio6", "gpio7", "gpio8";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment