Skip to content

L
linux
Commit 7b472ac7 authored by Joe Perches's avatar Joe Perches Committed by Robert Jarzmik
Browse files
Options

arm: mach-pxa: Convert pr_warning to pr_warn 

Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments
Signed-off-by: default avatarJoe Perches <joe@perches.com>
Signed-off-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
parent f114040e
Show whitespace changes
Inline Side-by-side
Showing with 25 additions and 28 deletions
arch/arm/mach-pxa/em-x270.c
View file @ 7b472ac7
......@@ -378,7 +378,7 @@ static void __init em_x270_init_nand(void)
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
if (err) {
pr_warning("EM-X270: failed to request NAND CS gpio\n");
pr_warn("EM-X270: failed to request NAND CS gpio\n");
return;
}
......@@ -386,7 +386,7 @@ static void __init em_x270_init_nand(void)
err = gpio_request(nand_rb, "NAND R/B");
if (err) {
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
pr_warn("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
......
arch/arm/mach-pxa/gumstix.c
View file @ 7b472ac7
......@@ -140,8 +140,7 @@ static void gumstix_setup_bt_clock(void)
int timeout = 500;
if (!(OSCC & OSCC_OOK))
pr_warning("32kHz clock was not on. Bootloader may need to "
"be updated\n");
pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
else
return;
......
arch/arm/mach-pxa/mfp-pxa2xx.c
View file @ 7b472ac7
......@@ -93,7 +93,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
break;
default:
/* warning and fall through, treat as MFP_LPM_DEFAULT */
pr_warning("%s: GPIO%d: unsupported low power mode\n",
pr_warn("%s: GPIO%d: unsupported low power mode\n",
__func__, gpio);
break;
}
......@@ -107,14 +107,12 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
* configurations of those pins not able to wakeup
*/
if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
pr_warning("%s: GPIO%d unable to wakeup\n",
__func__, gpio);
pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio);
return -EINVAL;
}
if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
pr_warning("%s: output GPIO%d unable to wakeup\n",
__func__, gpio);
pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio);
return -EINVAL;
}
......@@ -126,7 +124,7 @@ static inline int __mfp_validate(int mfp)
int gpio = mfp_to_gpio(mfp);
if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio);
return -1;
}
......
arch/arm/mach-pxa/poodle.c
View file @ 7b472ac7
......@@ -446,7 +446,7 @@ static void __init poodle_init(void)
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
pr_warning("poodle: Unable to register LoCoMo device\n");
pr_warn("poodle: Unable to register LoCoMo device\n");
pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
......
arch/arm/mach-pxa/pxa3xx-ulpi.c
View file @ 7b472ac7
......@@ -74,7 +74,7 @@ static int pxa310_ulpi_poll(void)
cpu_relax();
}
pr_warning("%s: ULPI access timed out!\n", __func__);
pr_warn("%s: ULPI access timed out!\n", __func__);
return -ETIMEDOUT;
}
......@@ -84,7 +84,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
int err;
if (pxa310_ulpi_get_phymode() != SYNCH) {
pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
return -EBUSY;
}
......@@ -101,7 +101,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
{
if (pxa310_ulpi_get_phymode() != SYNCH) {
pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
return -EBUSY;
}
......
arch/arm/mach-pxa/raumfeld.c
View file @ 7b472ac7
......@@ -521,7 +521,7 @@ static void __init raumfeld_w1_init(void)
"W1 external pullup enable");
if (ret < 0)
pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
else
gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
......@@ -600,7 +600,7 @@ static void __init raumfeld_lcd_init(void)
ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
if (ret < 0)
pr_warning("Unable to request GPIO_TFT_VA_EN\n");
pr_warn("Unable to request GPIO_TFT_VA_EN\n");
else
gpio_direction_output(GPIO_TFT_VA_EN, 1);
......@@ -608,7 +608,7 @@ static void __init raumfeld_lcd_init(void)
ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
if (ret < 0)
pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
else
gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
......@@ -814,17 +814,17 @@ static void __init raumfeld_power_init(void)
/* Set PEN2 high to enable maximum charge current */
ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
if (ret < 0)
pr_warning("Unable to request GPIO_CHRG_PEN2\n");
pr_warn("Unable to request GPIO_CHRG_PEN2\n");
else
gpio_direction_output(GPIO_CHRG_PEN2, 1);
ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
if (ret < 0)
pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
if (ret < 0)
pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
else
gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
......@@ -976,19 +976,19 @@ static void __init raumfeld_audio_init(void)
ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
if (ret < 0)
pr_warning("unable to request GPIO_CODEC_RESET\n");
pr_warn("unable to request GPIO_CODEC_RESET\n");
else
gpio_direction_output(GPIO_CODEC_RESET, 1);
ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
if (ret < 0)
pr_warning("unable to request GPIO_SPDIF_RESET\n");
pr_warn("unable to request GPIO_SPDIF_RESET\n");
else
gpio_direction_output(GPIO_SPDIF_RESET, 1);
ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
if (ret < 0)
pr_warning("unable to request GPIO_MCLK_RESET\n");
pr_warn("unable to request GPIO_MCLK_RESET\n");
else
gpio_direction_output(GPIO_MCLK_RESET, 1);
......@@ -1019,20 +1019,20 @@ static void __init raumfeld_common_init(void)
ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
if (ret < 0)
pr_warning("Unable to request GPIO_W2W_RESET\n");
pr_warn("Unable to request GPIO_W2W_RESET\n");
else
gpio_direction_output(GPIO_W2W_RESET, 0);
ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
if (ret < 0)
pr_warning("Unable to request GPIO_W2W_PDN\n");
pr_warn("Unable to request GPIO_W2W_PDN\n");
else
gpio_direction_output(GPIO_W2W_PDN, 0);
/* this can be used to switch off the device */
ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
if (ret < 0)
pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
else
gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
......@@ -1051,7 +1051,7 @@ static void __init raumfeld_controller_init(void)
ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
if (ret < 0)
pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
else
gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7