Commit 7c7d64b8 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by David S. Miller

tg3: convert to net_device_ops

Convert this driver to network device ops.
Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0edc3527
......@@ -13343,6 +13343,24 @@ static void __devinit tg3_init_coal(struct tg3 *tp)
}
}
static const struct net_device_ops tg3_netdev_ops = {
.ndo_open = tg3_open,
.ndo_stop = tg3_close,
.ndo_get_stats = tg3_get_stats,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = tg3_set_rx_mode,
.ndo_set_mac_address = tg3_set_mac_addr,
.ndo_do_ioctl = tg3_ioctl,
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
#if TG3_VLAN_TAG_USED
.ndo_vlan_rx_register = tg3_vlan_rx_register,
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
};
static int __devinit tg3_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
......@@ -13400,7 +13418,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
#if TG3_VLAN_TAG_USED
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->vlan_rx_register = tg3_vlan_rx_register;
#endif
tp = netdev_priv(dev);
......@@ -13458,21 +13475,11 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
tp->tx_pending = TG3_DEF_TX_RING_PENDING;
dev->open = tg3_open;
dev->stop = tg3_close;
dev->get_stats = tg3_get_stats;
dev->set_multicast_list = tg3_set_rx_mode;
dev->set_mac_address = tg3_set_mac_addr;
dev->do_ioctl = tg3_ioctl;
dev->tx_timeout = tg3_tx_timeout;
dev->netdev_ops = &tg3_netdev_ops;
netif_napi_add(dev, &tp->napi, tg3_poll, 64);
dev->ethtool_ops = &tg3_ethtool_ops;
dev->watchdog_timeo = TG3_TX_TIMEOUT;
dev->change_mtu = tg3_change_mtu;
dev->irq = pdev->irq;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = tg3_poll_controller;
#endif
err = tg3_get_invariants(tp);
if (err) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment