Skip to content

L
linux
Commit 7e285bef authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge home.transmeta.com:/home/torvalds/v2.5/hotplug 

into home.transmeta.com:/home/torvalds/v2.5/linux
parents c198a0a4 bcca07c1
Hide whitespace changes
Inline Side-by-side
Showing with 8379 additions and 2453 deletions
Documentation/00-INDEX
View file @ 7e285bef
......@@ -56,6 +56,8 @@ computone.txt
- info on Computone Intelliport II/Plus Multiport Serial Driver
cpqarray.txt
- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
cpufreq/
- info on CPU frequency and voltage scaling
cris/
- directory with info about Linux on CRIS architecture.
devices.txt
......
Documentation/cpu-freq/core.txt 0 → 100644
View file @ 7e285bef
CPU frequency and voltage scaling code in the Linux(TM) kernel
L i n u x C P U F r e q
C P U F r e q C o r e
Dominik Brodowski <linux@brodo.de>
David Kimdon <dwhedon@debian.org>
Clock scaling allows you to change the clock speed of the CPUs on the
fly. This is a nice method to save battery power, because the lower
the clock speed, the less power the CPU consumes.
Contents:
---------
1. CPUFreq core and interfaces
2. CPUFreq notifiers
1. General Information
=======================
The CPUFreq core code is located in linux/kernel/cpufreq.c. This
cpufreq code offers a standardized interface for the CPUFreq
architecture drivers (those pieces of code that do actual
frequency transitions), as well as to "notifiers". These are device
drivers or other part of the kernel that need to be informed of
policy changes (ex. thermal modules like ACPI) or of all
frequency changes (ex. timing code) or even need to force certain
speed limits (like LCD drivers on ARM architecture). Additionally, the
kernel "constant" loops_per_jiffy is updated on frequency changes
here.
2. CPUFreq notifiers
====================
CPUFreq notifiers conform to the standard kernel notifier interface.
See linux/include/linux/notifier.h for details on notifiers.
There are two different CPUFreq notifiers - policy notifiers and
transition notifiers.
2.1 CPUFreq policy notifiers
----------------------------
These are notified when a new policy is intended to be set. Each
CPUFreq policy notifier is called three times for a policy transition:
1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
they see a need for this - may it be thermal considerations or
hardware limitations.
2.) During CPUFREQ_INCOMPATIBLE only changes may be done in order to avoid
hardware failure.
3.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
- if two hardware drivers failed to agree on a new policy before this
stage, the incompatible hardware shall be shut down, and the user
informed of this.
The phase is specified in the second argument to the notifier.
The third argument, a void *pointer, points to a struct cpufreq_policy
consisting of five values: cpu, min, max, policy and max_cpu_freq. min
and max are the lower and upper frequencies (in kHz) of the new
policy, policy the new policy, cpu the number of the affected CPU or
CPUFREQ_ALL_CPUS for all CPUs; and max_cpu_freq the maximum supported
CPU frequency. This value is given for informational purposes only.
2.2 CPUFreq transition notifiers
--------------------------------
These are notified twice when the CPUfreq driver switches the CPU core
frequency and this change has any external implications.
The second argument specifies the phase - CPUFREQ_PRECHANGE or
CPUFREQ_POSTCHANGE.
The third argument is a struct cpufreq_freqs with the following
values:
cpu - number of the affected CPU or CPUFREQ_ALL_CPUS
old - old frequency
new - new frequency
Documentation/cpu-freq/cpu-drivers.txt 0 → 100644
View file @ 7e285bef
CPU frequency and voltage scaling code in the Linux(TM) kernel
L i n u x C P U F r e q
C P U D r i v e r s
- information for developers -
Dominik Brodowski <linux@brodo.de>
Clock scaling allows you to change the clock speed of the CPUs on the
fly. This is a nice method to save battery power, because the lower
the clock speed, the less power the CPU consumes.
Contents:
---------
1. What To Do?
1.1 Initialization
1.2 Per-CPU Initialization
1.3 verify
1.4 target or setpolicy?
1.5 target
1.6 setpolicy
2. Frequency Table Helpers
1. What To Do?
==============
So, you just got a brand-new CPU / chipset with datasheets and want to
add cpufreq support for this CPU / chipset? Great. Here are some hints
on what is neccessary:
1.1 Initialization
------------------
First of all, in an __initcall level 7 or later (preferrably
module_init() so that your driver is modularized) function check
whether this kernel runs on the right CPU and the right chipset. If
so, register a struct cpufreq_driver with the CPUfreq core using
cpufreq_register_driver()
What shall this struct cpufreq_driver contain?
cpufreq_driver.name - The name of this driver.
cpufreq_driver.init - A pointer to the per-CPU initialization
function.
cpufreq_driver.verify - A pointer to a "verfication" funciton.
cpufreq_driver.setpolicy _or_
cpufreq_driver.target - See below on the differences.
And optionally
cpufreq_driver.exit - A pointer to a per-CPU cleanup function.
1.2 Per-CPU Initialization
--------------------------
Whenever a new CPU is registered with the device model, or after the
cpufreq driver registers itself, the per-CPU initialization fucntion
cpufreq_driver.init is called. It takes a struct cpufreq_policy
*policy as argument. What to do now?
If necessary, activate the CPUfreq support on your CPU (unlock that
register etc.).
Then, the driver must fill in the following values:
policy->cpuinfo.min_freq _and_
policy->cpuinfo.max_freq - the minimum and maximum frequency
(in kHz) which is supported by
this CPU
policy->cpuinfo.transition_latency the time it takes on this CPU to
switch between two frequencies (if
appropriate, else specify
CPUFREQ_ETERNAL)
policy->cur The current operating frequency of
this CPU (if appropriate)
policy->min,
policy->max,
policy->policy and, if neccessary,
policy->governor must contain the "default policy" for
this CPU. A few moments later,
cpufreq_driver.verify and either
cpufreq_driver.setpolicy or
cpufreq_driver.target is called with
these values.
For setting some of these values, the frequency table helpers might be
helpful. See the section 2 for more information on them.
1.3 verify
------------
When the user decides a new policy (consisting of
"policy,governor,min,max") shall be set, this policy must be validated
so that incompatible values can be corrected. For verifying these
values, a frequency table helper and/or the
cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned
int min_freq, unsigned int max_freq) function might be helpful. See
section 2 for details on frequency table helpers.
You need to make sure that at least one valid frequency (or operating
range) is within policy->min and policy->max. If necessary, increase
policy->max fist, and only if this is no solution, decreas policy->min.
1.4 target or setpolicy?
----------------------------
Most cpufreq drivers or even most cpu frequency scaling algorithms
only allow the CPU to be set to one frequency. For these, you use the
->target call.
Some cpufreq-capable processors switch the frequency between certain
limits on their own. These shall use the ->setpolicy call
1.4. target
-------------
The target call has three arguments: struct cpufreq_policy *policy,
unsigned int target_frequency, unsigned int relation.
The CPUfreq driver must set the new frequency when called here. The
actual frequency must be determined using the following rules:
- keep close to "target_freq"
- policy->min <= new_freq <= policy->max (THIS MUST BE VALID!!!)
- if relation==CPUFREQ_REL_L, try to select a new_freq higher than or equal
target_freq. ("L for lowest, but no lower than")
- if relation==CPUFREQ_REL_H, try to select a new_freq lower than or equal
target_freq. ("H for highest, but no higher than")
Here again the frequency table helper might assist you - see section 3
for details.
1.5 setpolicy
---------------
The setpolicy call only takes a struct cpufreq_policy *policy as
argument. You need to set the lower limit of the in-processor or
in-chipset dynamic frequency switching to policy->min, the upper limit
to policy->max, and -if supported- select a performance-oriented
setting when policy->policy is CPUFREQ_POLICY_PERFORMANCE, and a
powersaving-oriented setting when CPUFREQ_POLICY_POWERSAVE. Also check
the reference implementation in arch/i386/kernel/cpu/cpufreq/longrun.c
2. Frequency Table Helpers
==========================
As most cpufreq processors only allow for being set to a few specific
frequencies, a "frequency table" with some functions might assist in
some work of the processor driver. Such a "frequency table" consists
of an array of struct cpufreq_freq_table entries, with any value in
"index" you want to use, and the corresponding frequency in
"frequency". At the end of the table, you need to add a
cpufreq_freq_table entry with frequency set to CPUFREQ_TABLE_END. And
if you want to skip one entry in the table, set the frequency to
CPUFREQ_ENTRY_INVALID. The entries don't need to be in ascending
order.
By calling cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table);
the cpuinfo.min_freq and cpuinfo.max_freq values are detected, and
policy->min and policy->max are set to the same values. This is
helpful for the per-CPU initialization stage.
int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table);
assures that at least one valid frequency is within policy->min and
policy->max, and all other criteria are met. This is helpful for the
->verify call.
int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table,
unsigned int target_freq,
unsigned int relation,
unsigned int *index);
is the corresponding frequency table helper for the ->target
stage. Just pass the values to this function, and the unsigned int
index returns the number of the frequency table entry which contains
the frequency the CPU shall be set to. PLEASE NOTE: This is not the
"index" which is in this cpufreq_table_entry.index, but instead
cpufreq_table[index]. So, the new frequency is
cpufreq_table[index].frequency, and the value you stored into the
frequency table "index" field is
cpufreq_table[index].index.
Documentation/cpu-freq/governors.txt 0 → 100644
View file @ 7e285bef
CPU frequency and voltage scaling code in the Linux(TM) kernel
L i n u x C P U F r e q
C P U F r e q G o v e r n o r s
- information for users and developers -
Dominik Brodowski <linux@brodo.de>
Clock scaling allows you to change the clock speed of the CPUs on the
fly. This is a nice method to save battery power, because the lower
the clock speed, the less power the CPU consumes.
Contents:
---------
1. What is a CPUFreq Governor?
2. Governors In the Linux Kernel
2.1 Performance
2.2 Powersave
2.3 Userspace
3. The Governor Interface in the CPUfreq Core
1. What Is A CPUFreq Governor?
==============================
Most cpufreq drivers (in fact, all except one, longrun) or even most
cpu frequency scaling algorithms only offer the CPU to be set to one
frequency. In order to offer dynamic frequency scaling, the cpufreq
core must be able to tell these drivers of a "target frequency". So
these specific drivers will be transformed to offer a "->target"
call instead of the existing "->setpolicy" call. For "longrun", all
stays the same, though.
How to decide what frequency within the CPUfreq policy should be used?
That's done using "cpufreq governors". Two are already in this patch
-- they're the already existing "powersave" and "performance" which
set the frequency statically to the lowest or highest frequency,
respectively. At least two more such governors will be ready for
addition in the near future, but likely many more as there are various
different theories and models about dynamic frequency scaling
around. Using such a generic interface as cpufreq offers to scaling
governors, these can be tested extensively, and the best one can be
selected for each specific use.
Basically, it's the following flow graph:
CPU can be set to switch independetly | CPU can only be set
within specific "limits" | to specific frequencies
"CPUfreq policy"
consists of frequency limits (policy->{min,max})
and CPUfreq governor to be used
/ \
/ \
/ the cpufreq governor decides
/ (dynamically or statically)
/ what target_freq to set within
/ the limits of policy->{min,max}
/ \
/ \
Using the ->setpolicy call, Using the ->target call,
the limits and the the frequency closest
"policy" is set. to target_freq is set.
It is assured that it
is within policy->{min,max}
2. Governors In the Linux Kernel
================================
2.1 Performance
---------------
The CPUfreq governor "performance" sets the CPU statically to the
highest frequency within the borders of scaling_min_freq and
scaling_max_freq.
2.1 Powersave
-------------
The CPUfreq governor "powersave" sets the CPU statically to the
lowest frequency within the borders of scaling_min_freq and
scaling_max_freq.
2.2 Userspace
-------------
The CPUfreq governor "userspace" allows the user, or any userspace
program running with UID "root", to set the CPU to a specifc frequency
by making a sysfs file "scaling_setspeed" available in the CPU-device
directory.
3. The Governor Interface in the CPUfreq Core
=============================================
A new governor must register itself with the CPUfreq core using
"cpufreq_register_governor". The struct cpufreq_governor, which has to
be passed to that function, must contain the following values:
governor->name - A unique name for this governor
governor->governor - The governor callback function
governor->owner - .THIS_MODULE for the governor module (if
appropriate)
The governor->governor callback is called with the current (or to-be-set)
cpufreq_policy struct for that CPU, and an unsigned int event. The
following events are currently defined:
CPUFREQ_GOV_START: This governor shall start its duty for the CPU
policy->cpu
CPUFREQ_GOV_STOP: This governor shall end its duty for the CPU
policy->cpu
CPUFREQ_GOV_LIMITS: The limits for CPU policy->cpu have changed to
policy->min and policy->max.
If you need other "events" externally of your driver, _only_ use the
cpufreq_governor_l(unsigned int cpu, unsigned int event) call to the
CPUfreq core to ensure proper locking.
The CPUfreq governor may call the CPU processor driver using one of
these two functions:
inline int cpufreq_driver_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation);
inline int cpufreq_driver_target_l(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation);
target_freq must be within policy->min and policy->max, of course.
What's the difference between these two functions? When your governor
still is in a direct code path of a call to governor->governor, the
cpufreq_driver_sem lock is still held in the cpufreq core, and there's
no need to lock it again (in fact, this would cause a deadlock). So
use cpufreq_driver_target only in these cases. In all other cases (for
example, when there's a "daemonized" function that wakes up every
second), use cpufreq_driver_target_l to lock the cpufreq_driver_sem
before the command is passed to the cpufreq processor driver.
Documentation/cpu-freq/index.txt 0 → 100644
View file @ 7e285bef
CPU frequency and voltage scaling code in the Linux(TM) kernel
L i n u x C P U F r e q
Dominik Brodowski <linux@brodo.de>
Clock scaling allows you to change the clock speed of the CPUs on the
fly. This is a nice method to save battery power, because the lower
the clock speed, the less power the CPU consumes.
Documents in this directory:
----------------------------
core.txt - General description of the CPUFreq core and
of CPUFreq notifiers
cpu-drivers.txt - How to implement a new cpufreq processor driver
governors.txt - What are cpufreq governors and how to
implement them?
index.txt - File index, Mailing list and Links (this document)
user-guide.txt - User Guide to CPUFreq
Mailing List
------------
There is a CPU frequency changing CVS commit and general list where
you can report bugs, problems or submit patches. To post a message,
send an email to cpufreq@www.linux.org.uk, to subscribe go to
http://www.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the
mailing list are available to subscribers at
http://www.linux.org.uk/mailman/private/cpufreq/.
Links
-----
the FTP archives:
* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
how to access the CVS repository:
* http://cvs.arm.linux.org.uk/
the CPUFreq Mailing list:
* http://www.linux.org.uk/mailman/listinfo/cpufreq
Clock and voltage scaling for the SA-1100:
* http://www.lart.tudelft.nl/projects/scaling
Documentation/cpu-freq/user-guide.txt 0 → 100644
View file @ 7e285bef
CPU frequency and voltage scaling code in the Linux(TM) kernel
L i n u x C P U F r e q
U S E R G U I D E
Dominik Brodowski <linux@brodo.de>
Clock scaling allows you to change the clock speed of the CPUs on the
fly. This is a nice method to save battery power, because the lower
the clock speed, the less power the CPU consumes.
Contents:
---------
1. Supported Architectures and Processors
1.1 ARM
1.2 x86
1.3 sparc64
2. "Policy" / "Governor"?
2.1 Policy
2.2 Governor
3. How to change the CPU cpufreq policy and/or speed
3.1 Preferred interface: sysfs
3.2 Deprecated interfaces
1. Supported Architectures and Processors
=========================================
1.1 ARM
-------
The following ARM processors are supported by cpufreq:
ARM Integrator
ARM-SA1100
ARM-SA1110
1.2 x86
-------
The following processors for the x86 architecture are supported by cpufreq:
AMD Elan - SC400, SC410
AMD mobile K6-2+
AMD mobile K6-3+
Cyrix Media GXm
Intel mobile PIII [*] and Intel mobile PIII-M on certain chipsets
Intel Pentium 4, Intel Xeon
National Semiconductors Geode GX
Transmeta Crusoe
varios processors on some ACPI 2.0-compatible systems [**]
[*] only certain Intel mobile PIII processors are supported. If you
know that you own a speedstep-capable processor, pass the option
"speedstep_coppermine=1" to the module speedstep.o
[**] Only if "ACPI Processor Performance States" are available
to the ACPI<->BIOS interface.
1.3 sparc64
-----------
The following processors for the sparc64 architecture are supported by
cpufreq:
UltraSPARC-III
2. "Policy" / "Governor" ?
==========================
Some CPU frequency scaling-capable processor switch between varios
frequencies and operating voltages "on the fly" without any kernel or
user involvement. This guarantuees very fast switching to a frequency
which is high enough to serve the user's needs, but low enough to save
power.
2.1 Policy
----------
On these systems, all you can do is select the lower and upper
frequency limit as well as whether you want more aggressive
power-saving or more instantly avaialble processing power.
2.2 Governor
------------
On all other cpufreq implementations, these boundaries still need to
be set. Then, a "governor" must be selected. Such a "governor" decides
what speed the processor shall run within the boundaries. One such
"governor" is the "userspace" governor. This one allows the user - or
a yet-to-implement userspace program - to decide what specific speed
the processor shall run at.
3. How to change the CPU cpufreq policy and/or speed
====================================================
3.1 Preferred Interface: sysfs
------------------------------
The preferred interface is located in the sysfs filesystem. If you
mounted it at /sys, the cpufreq interface is located in the
cpu-device directory (e.g. /sys/devices/sys/cpu0/ for the first
CPU).
cpuinfo_min_freq : this file shows the minimum operating
frequency the processor can run at(in kHz)
cpuinfo_max_freq : this file shows the maximum operating
frequency the processor can run at(in kHz)
scaling_driver : this file shows what cpufreq driver is
used to set the frequency on this CPU
available_scaling_governors : this file shows the CPUfreq governors
available in this kernel. You can see the
currently activated governor in
scaling_governor, and by "echoing" the name of another
governor you can change it. Please note
that some governors won't load - they only
work on some specific architectures or
processors.
scaling_min_freq and
scaling_max_freq show the current "policy limits" (in
kHz). By echoing new values into these
files, you can change these limits.
If you have selected the "userspace" governor which allows you to
set the CPU operating frequency to a specific value, you can read out
the current frequency in
scaling_setspeed. By "echoing" a new frequency into this
you can change the speed of the CPU,
but only within the limits of
scaling_min_freq and scaling_max_freq.
3.2 Deprecated Interfaces
-------------------------
Depending on your kernel configuration, you might find the following
cpufreq-related files:
/proc/cpufreq
/proc/sys/cpu/*/speed
/proc/sys/cpu/*/speed-min
/proc/sys/cpu/*/speed-max
These are files for deprecated interfaces to cpufreq, which offer far
less functionality. Because of this, these interfaces aren't described
here.
Documentation/cpufreq deleted 100644 → 0
View file @ c198a0a4
CPU frequency and voltage scaling code in the Linux(TM) kernel
L i n u x C P U F r e q
Dominik Brodowski <linux@brodo.de>
David Kimdon <dwhedon@debian.org>
Clock scaling allows you to change the clock speed of the CPUs on the
fly. This is a nice method to save battery power, because the lower
the clock speed, the less power the CPU consumes.
Contents:
---------
1. Supported architectures
2. User interface
2.1 /proc/cpufreq interface [2.6]
2.2. /proc/sys/cpu/ interface [2.4]
3. CPUFreq core and interfaces
3.1 General information
3.2 CPUFreq notifiers
3.3 CPUFreq architecture drivers
4. Mailing list and Links
1. Supported architectures
==========================
ARM:
ARM Integrator, SA 1100, SA1110
--------------------------------
This driver will be ported to new CPUFreq core soon, so
far it will not work.
AMD Elan:
SC400, SC410
--------------------------------
You need to specify the highest allowed CPU frequency as
a module parameter ("max_freq") or as boot parameter
("elanfreq="). Else the available speed range will be
limited to the speed at which the CPU runs while this
module is loaded.
VIA Cyrix Longhaul:
VIA Samuel/CyrixIII, VIA Cyrix Samuel/C3,
VIA Cyrix Ezra, VIA Cyrix Ezra-T
--------------------------------
If you do not want to scale the Front Side Bus or voltage,
pass the module parameter "dont_scale_fsb 1" or
"dont_scale_voltage 1". Additionally, it is advised that
you pass the current Front Side Bus speed (in MHz) to
this module as module parameter "current_fsb", e.g.
"current_fsb 133" for a Front Side Bus speed of 133 MHz.
Intel SpeedStep:
certain mobile Intel Pentium III (Coppermine), and all mobile
Intel Pentium III-M (Tualatin) and mobile Intel Pentium 4 P4-Ms.
--------------------------------
Unfortunately only modern Intel ICH2-M and ICH3-M chipsets are
supported.
P4 CPU Clock Modulation:
Intel Pentium 4 Xeon processors
---------------------------------
Note that you can only switch the speed of two logical CPUs at
once - but each phyiscal CPU may have different throttling levels.
PowerNow! K6:
mobile AMD K6-2+ / mobile K6-3+:
--------------------------------
No known issues.
Transmeta Crusoe Longrun:
Transmeta Crusoe processors:
--------------------------------
It is recommended to use the 2.6. /proc/cpufreq interface when
using this driver
2. User Interface
=================
2.1 /proc/cpufreq interface [2.6]
***********************************
Starting in the patches for kernel 2.5.33, CPUFreq uses a "policy"
interface /proc/cpufreq.
When you "cat" this file, you'll find something like:
--
minimum CPU frequency - maximum CPU frequency - policy
CPU 0 1200000 ( 75%) - 1600000 (100%) - performance
--
This means the current policy allows this CPU to be run anywhere
between 1.2 GHz (the value is in kHz) and 1.6 GHz with an eye towards
performance.
To change the policy, "echo" the desired new policy into
/proc/cpufreq. Use one of the following formats:
cpu_nr:min_freq:max_freq:policy
cpu_nr%min_freq%max_freq%policy
min_freq:max_freq:policy
min_freq%max_freq%policy
with cpu_nr being the CPU which shall be affected, min_freq and
max_freq the lower and upper limit of the CPU core frequency in kHz,
and policy either "performance" or "powersave".
A few examples:
root@notebook:#echo -n "0:0:0:powersave" > /proc/cpufreq
sets the CPU #0 to the lowest supported frequency.
root@notebook:#echo -n "1%100%100%performance" > /proc/cpufreq
sets the CPU #1 to the highest supported frequency.
root@notebook:#echo -n "1000000:2000000:performance" > /proc/cpufreq
to set the frequency of all CPUs between 1 GHz and 2 GHz and to
the policy "performance".
Please note that the values you "echo" into /proc/cpufreq are
validated first, and may be limited by hardware or thermal
considerations. Because of this, a read from /proc/cpufreq might
differ from what was written into it.
When you read /proc/cpufreq for the first time after a CPUFreq driver
has been initialized, you'll see the "default policy" for this
driver. If this does not suit your needs, you can pass a boot
parameter to the cpufreq core. Use the following syntax for this:
"cpufreq=min_freq:max_freq:policy", i.e. you may not chose a
specific CPU and you need to specify the limits in kHz and not in
per cent.
2.2 /proc/cpufreq interface [2.4]
***********************************
Previsiously (and still available as a config option), CPUFreq used
a "sysctl" interface which is located in
/proc/sys/cpu/0/
/proc/sys/cpu/1/ ... (SMP only)
In these directories, you will find three files of importance for
CPUFreq: speed-max, speed-min and speed:
speed shows the current CPU frequency in kHz,
speed-min the minimum supported CPU frequency, and
speed-max the maximum supported CPU frequency.
To change the CPU frequency, "echo" the desired CPU frequency (in kHz)
to speed. For example, to set the CPU speed to the lowest/highest
allowed frequency do:
root@notebook:# cat /proc/sys/cpu/0/speed-min > /proc/sys/cpu/0/speed
root@notebook:# cat /proc/sys/cpu/0/speed-max > /proc/sys/cpu/0/speed
3. CPUFreq core and interfaces
===============================
3.1 General information
*************************
The CPUFreq core code is located in linux/kernel/cpufreq.c. This
cpufreq code offers a standardized interface for the CPUFreq
architecture drivers (those pieces of code that do actual
frequency transitions), as well as to "notifiers". These are device
drivers or other part of the kernel that need to be informed of
policy changes (like thermal modules like ACPI) or of all
frequency changes (like timing code) or even need to force certain
speed limits (like LCD drivers on ARM architecture). Additionally, the
kernel "constant" loops_per_jiffy is updated on frequency changes
here.
3.2 CPUFreq notifiers
***********************
CPUFreq notifiers conform to the standard kernel notifier interface.
See linux/include/linux/notifier.h for details on notifiers.
There are two different CPUFreq notifiers - policy notifiers and
transition notifiers.
3.2.1 CPUFreq policy notifiers
******************************
These are notified when a new policy is intended to be set. Each
CPUFreq policy notifier is called three times for a policy transition:
1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
they see a need for this - may it be thermal considerations or
hardware limitations.
2.) During CPUFREQ_INCOMPATIBLE only changes may be done in order to avoid
hardware failure.
3.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
- if two hardware drivers failed to agree on a new policy before this
stage, the incompatible hardware shall be shut down, and the user
informed of this.
The phase is specified in the second argument to the notifier.
The third argument, a void *pointer, points to a struct cpufreq_policy
consisting of five values: cpu, min, max, policy and max_cpu_freq. Min
and max are the lower and upper frequencies (in kHz) of the new
policy, policy the new policy, cpu the number of the affected CPU or
CPUFREQ_ALL_CPUS for all CPUs; and max_cpu_freq the maximum supported
CPU frequency. This value is given for informational purposes only.
3.2.2 CPUFreq transition notifiers
**********************************
These are notified twice when the CPUfreq driver switches the CPU core
frequency and this change has any external implications.
The second argument specifies the phase - CPUFREQ_PRECHANGE or
CPUFREQ_POSTCHANGE.
The third argument is a struct cpufreq_freqs with the following
values:
cpu - number of the affected CPU or CPUFREQ_ALL_CPUS
old - old frequency
new - new frequency
3.3 CPUFreq architecture drivers
**********************************
CPUFreq architecture drivers are the pieces of kernel code that
actually perform CPU frequency transitions. These need to be
initialized separately (separate initcalls), and may be
modularized. They interact with the CPUFreq core in the following way:
cpufreq_register()
------------------
cpufreq_register registers an arch driver to the CPUFreq core. Please
note that only one arch driver may be registered at any time. -EBUSY
is returned when an arch driver is already registered. The argument to
cpufreq_register, struct cpufreq_driver *driver, is described later.
cpufreq_unregister()
--------------------
cpufreq_unregister unregisters an arch driver, e.g. on module
unloading. Please note that there is no check done that this is called
from the driver which actually registered itself to the core, so
please only call this function when you are sure the arch driver got
registered correctly before.
cpufreq_notify_transition()
---------------------------
On "dumb" hardware where only fixed frequency can be set, the driver
must call cpufreq_notify_transition() once before, and once after the
actual transition.
struct cpufreq_driver
---------------------
On initialization, the arch driver is supposed to pass a pointer
to a struct cpufreq_driver *cpufreq_driver consisting of the following
entries:
cpufreq_verify_t verify: This is a pointer to a function with the
following definition:
int verify_function (struct cpufreq_policy *policy).
This function must verify the new policy is within the limits
supported by the CPU, and at least one supported CPU is within
this range. It may be useful to use cpufreq.h /
cpufreq_verify_within_limits for this. If this is called with
CPUFREQ_ALL_CPUS, and there is no common subset of frequencies
for all CPUs, exit with an error.
cpufreq_setpolicy_t setpolicy: This is a pointer to a function with
the following definition:
int setpolicy_function (struct cpufreq_policy *policy).
This function must set the CPU to the new policy. If it is a
"dumb" CPU which only allows fixed frequencies to be set, it
shall set it to the lowest within the limit for
CPUFREQ_POLICY_POWERSAVE, and to the highest for
CPUFREQ_POLICY_PERFORMANCE. Once CONFIG_CPU_FREQ_DYNAMIC is
implemented, it can use a dynamic method to adjust the speed
between the lower and upper limit.
struct cpufreq_policy *policy: This is an array of NR_CPUS struct
cpufreq_policies, containing the current policies set for these
CPUs. Note that policy[cpu].max_cpu_freq must contain the
absolute maximum CPU frequency supported by the specified cpu.
In case the driver is expected to run with the 2.4.-style API
(/proc/sys/cpu/.../), two more values must be passed
#ifdef CONFIG_CPU_FREQ_24_API
unsigned int cpu_min_freq[NR_CPUS];
unsigned int cpu_cur_freq[NR_CPUS];
#endif
with cpu_min_freq[cpu] being the minimum CPU frequency
supported by the CPU; and the entries in cpu_cur_freq
reflecting the current speed of the appropriate CPU.
Some Requirements to CPUFreq architecture drivers
-------------------------------------------------
* Only call cpufreq_register() when the ability to switch CPU
frequencies is _verified_ or can't be missing. Also, all
other initialization must be done beofre this call, as
cpfureq_register calls the driver's verify and setpolicy code for
each CPU.
* cpufreq_unregister() may only be called if cpufreq_register() has
been successfully(!) called before.
* kfree() the struct cpufreq_driver only after the call to
cpufreq_unregister(), unless cpufreq_register() failed.
4. Mailing list and Links
*************************
Mailing List
------------
There is a CPU frequency changing CVS commit and general list where
you can report bugs, problems or submit patches. To post a message,
send an email to cpufreq@www.linux.org.uk, to subscribe go to
http://www.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the
mailing list are available to subscribers at
http://www.linux.org.uk/mailman/private/cpufreq/.
Links
-----
the FTP archives:
* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
how to access the CVS repository:
* http://cvs.arm.linux.org.uk/
the CPUFreq Mailing list:
* http://www.linux.org.uk/mailman/listinfo/cpufreq
Clock and voltage scaling for the SA-1100:
* http://www.lart.tudelft.nl/projects/scaling
CPUFreq project homepage
* http://www.brodo.de/cpufreq/
Makefile
View file @ 7e285bef
......@@ -159,7 +159,7 @@ STRIP = $(CROSS_COMPILE)strip
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
GENKSYMS = /sbin/genksyms
GENKSYMS = scripts/genksyms/genksyms
DEPMOD = /sbin/depmod
KALLSYMS = scripts/kallsyms
PERL = perl
......@@ -190,6 +190,7 @@ export MODVERDIR := .tmp_versions
# The temporary file to save gcc -MD generated dependencies must not
# contain a comma
comma := ,
depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
noconfig_targets := xconfig menuconfig config oldconfig randconfig \
......@@ -319,36 +320,31 @@ define cmd_vmlinux__
endef
# set -e makes the rule exit immediately on error
# Final awk script makes sure per-cpu vars are in per-cpu section, as
# old gcc (eg egcs 2.92.11) ignores section attribute if uninitialized.
define rule_vmlinux__
set -e
$(if $(filter .tmp_kallsyms%,$^),,
echo ' Generating build number'
. $(src)/scripts/mkversion > .tmp_version
mv -f .tmp_version .version
$(Q)$(MAKE) $(build)=init
set -e; \
$(if $(filter .tmp_kallsyms%,$^),, \
echo ' GEN .version'; \
. $(srctree)/scripts/mkversion > .tmp_version; \
mv -f .tmp_version .version; \
$(MAKE) $(build)=init; \
)
$(call cmd,vmlinux__)
$(call cmd,vmlinux__); \
echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
endef
define rule_vmlinux_no_percpu
$(rule_vmlinux__)
$(NM) $@ | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > System.map
endef
ifdef CONFIG_SMP
# Final awk script makes sure per-cpu vars are in per-cpu section, as
# old gcc (eg egcs 2.92.11) ignores section attribute if uninitialized.
check_per_cpu = $(AWK) -f $(srctree)/scripts/per-cpu-check.awk < System.map
endif
define rule_vmlinux
$(rule_vmlinux_no_percpu)
$(AWK) -f $(srctree)/scripts/per-cpu-check.awk < System.map
endef
else
define rule_vmlinux
$(rule_vmlinux_no_percpu)
$(rule_vmlinux__)
$(NM) $@ | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > System.map
$(check_per_cpu)
endef
endif
LDFLAGS_vmlinux += -T arch/$(ARCH)/vmlinux.lds.s
......@@ -377,7 +373,7 @@ cmd_kallsyms = $(NM) -n $< | scripts/kallsyms > $@
$(call cmd,kallsyms)
.tmp_vmlinux1: $(vmlinux-objs) arch/$(ARCH)/vmlinux.lds.s FORCE
$(call if_changed_rule,vmlinux__)
+$(call if_changed_rule,vmlinux__)
.tmp_vmlinux2: $(vmlinux-objs) .tmp_kallsyms1.o arch/$(ARCH)/vmlinux.lds.s FORCE
$(call if_changed_rule,vmlinux__)
......@@ -457,14 +453,14 @@ include/asm:
# Split autoconf.h into include/linux/config/*
include/config/MARKER: scripts/split-include include/linux/autoconf.h
@echo ' SPLIT include/linux/autoconf.h -> include/config/*'
@echo ' SPLIT include/linux/autoconf.h -> include/config/*'
@scripts/split-include include/linux/autoconf.h include/config
@touch $@
# if .config is newer than include/linux/autoconf.h, someone tinkered
# with it and forgot to run make oldconfig
include/linux/autoconf.h: .config
include/linux/autoconf.h: .config scripts
$(Q)$(MAKE) $(build)=scripts/kconfig scripts/kconfig/conf
./scripts/kconfig/conf -s arch/$(ARCH)/Kconfig
......@@ -505,8 +501,11 @@ all: modules
# Build modules
include/linux/compile.h: FORCE
$(Q)$(MAKE) $(build)=init include/linux/compile.h
.PHONY: modules
modules: $(SUBDIRS) $(if $(CONFIG_MODVERSIONS),vmlinux)
modules: $(SUBDIRS) $(if $(KBUILD_BUILTIN),vmlinux) include/linux/compile.h
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f scripts/Makefile.modpost
......@@ -571,6 +570,7 @@ define generate-asm-offsets.h
echo "#endif" )
endef
else # ifdef include_config
ifeq ($(filter-out $(noconfig_targets),$(MAKECMDGOALS)),)
......@@ -741,10 +741,10 @@ tags: FORCE
# If you do a make spec before packing the tarball you can rpm -ta it
spec:
. scripts/mkspec >kernel.spec
. $(srctree)/scripts/mkspec >kernel.spec
# Build a tar ball, generate an rpm from it and pack the result
# There arw two bits of magic here
# There are two bits of magic here
# 1) The use of /. to avoid tar packing just the symlink
# 2) Removing the .dep files as they have source paths in them that
# will become invalid
......@@ -815,11 +815,6 @@ checkconfig:
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkconfig.pl
checkhelp:
find * $(RCS_FIND_IGNORE) \
-name [cC]onfig.in -print | sort \
| xargs $(PERL) -w scripts/checkhelp.pl
checkincludes:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
......
arch/i386/kernel/cpu/cpufreq/Kconfig
View file @ 7e285bef
......@@ -18,20 +18,6 @@ config CPU_FREQ
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_24_API
bool "/proc/sys/cpu/ interface (2.4. / OLD)"
depends on CPU_FREQ
help
This enables the /proc/sys/cpu/ sysctl interface for controlling
CPUFreq, as known from the 2.4.-kernel patches for CPUFreq. 2.5
uses a sysfs interface instead. Please note that some drivers do
not work well with the 2.4. /proc/sys/cpu sysctl interface,
so if in doubt, say N here.
For details, take a look at linux/Documentation/cpufreq.
If in doubt, say N.
config CPU_FREQ_TABLE
tristate "CPU frequency table helpers"
depends on CPU_FREQ
......@@ -56,6 +42,16 @@ config X86_ACPI_CPUFREQ
If in doubt, say N.
config X86_ACPI_CPUFREQ_PROC_INTF
bool "/proc/acpi/processor/../performance interface (deprecated)"
depends on X86_ACPI_CPUFREQ && PROC_FS
help
This enables the deprecated /proc/acpi/processor/../performance
interface. While it is helpful for debugging, the generic,
cross-architecture cpufreq interfaces should be used.
If in doubt, say N.
config ELAN_CPUFREQ
tristate "AMD Elan"
depends on CPU_FREQ_TABLE && MELAN
......@@ -139,7 +135,7 @@ config X86_LONGRUN
config X86_LONGHAUL
tristate "VIA Cyrix III Longhaul"
depends on CPU_FREQ
depends on CPU_FREQ_TABLE
help
This adds the CPUFreq driver for VIA Samuel/CyrixIII,
VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
......
arch/i386/kernel/cpu/cpufreq/acpi.c
View file @ 7e285bef
/*
* acpi_processor_perf.c - ACPI Processor P-States Driver ($Revision: 71 $)
* acpi_processor_perf.c - ACPI Processor P-States Driver ($Revision: 1.3 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
......@@ -50,23 +50,12 @@ MODULE_DESCRIPTION(ACPI_PROCESSOR_DRIVER_NAME);
MODULE_LICENSE("GPL");
/* Performance Management */
static struct acpi_processor_performance *performance;
static struct cpufreq_driver acpi_cpufreq_driver;
static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file);
static struct file_operations acpi_processor_perf_fops = {
.open = acpi_processor_perf_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int
acpi_processor_get_performance_control (
struct acpi_processor *pr)
struct acpi_processor_performance *perf)
{
int result = 0;
acpi_status status = 0;
......@@ -77,7 +66,7 @@ acpi_processor_get_performance_control (
ACPI_FUNCTION_TRACE("acpi_processor_get_performance_control");
status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
status = acpi_evaluate_object(perf->pr->handle, "_PCT", NULL, &buffer);
if(ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PCT\n"));
return_VALUE(-ENODEV);
......@@ -116,7 +105,7 @@ acpi_processor_get_performance_control (
goto end;
}
pr->performance->control_register = (u16) reg->address;
perf->control_register = (u16) reg->address;
/*
* status_register
......@@ -143,12 +132,12 @@ acpi_processor_get_performance_control (
goto end;
}
pr->performance->status_register = (u16) reg->address;
perf->status_register = (u16) reg->address;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"control_register[0x%04x] status_register[0x%04x]\n",
pr->performance->control_register,
pr->performance->status_register));
perf->control_register,
perf->status_register));
end:
acpi_os_free(buffer.pointer);
......@@ -159,7 +148,7 @@ acpi_processor_get_performance_control (
static int
acpi_processor_get_performance_states (
struct acpi_processor* pr)
struct acpi_processor_performance * perf)
{
int result = 0;
acpi_status status = AE_OK;
......@@ -171,7 +160,7 @@ acpi_processor_get_performance_states (
ACPI_FUNCTION_TRACE("acpi_processor_get_performance_states");
status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
status = acpi_evaluate_object(perf->pr->handle, "_PSS", NULL, &buffer);
if(ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PSS\n"));
return_VALUE(-ENODEV);
......@@ -188,20 +177,20 @@ acpi_processor_get_performance_states (
pss->package.count));
if (pss->package.count > ACPI_PROCESSOR_MAX_PERFORMANCE) {
pr->performance->state_count = ACPI_PROCESSOR_MAX_PERFORMANCE;
perf->state_count = ACPI_PROCESSOR_MAX_PERFORMANCE;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Limiting number of states to max (%d)\n",
ACPI_PROCESSOR_MAX_PERFORMANCE));
}
else
pr->performance->state_count = pss->package.count;
perf->state_count = pss->package.count;
if (pr->performance->state_count > 1)
pr->flags.performance = 1;
if (perf->state_count > 1)
perf->pr->flags.performance = 1;
for (i = 0; i < pr->performance->state_count; i++) {
for (i = 0; i < perf->state_count; i++) {
struct acpi_processor_px *px = &(pr->performance->states[i]);
struct acpi_processor_px *px = &(perf->states[i]);
state.length = sizeof(struct acpi_processor_px);
state.pointer = px;
......@@ -236,7 +225,7 @@ acpi_processor_get_performance_states (
static int
acpi_processor_set_performance (
struct acpi_processor *pr,
struct acpi_processor_performance *perf,
int state)
{
u16 port = 0;
......@@ -246,38 +235,38 @@ acpi_processor_set_performance (
ACPI_FUNCTION_TRACE("acpi_processor_set_performance");
if (!pr)
if (!perf || !perf->pr)
return_VALUE(-EINVAL);
if (!pr->flags.performance)
if (!perf->pr->flags.performance)
return_VALUE(-ENODEV);
if (state >= pr->performance->state_count) {
if (state >= perf->state_count) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Invalid target state (P%d)\n", state));
return_VALUE(-ENODEV);
}
if (state < pr->performance_platform_limit) {
if (state < perf->pr->performance_platform_limit) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN,
"Platform limit (P%d) overrides target state (P%d)\n",
pr->performance->platform_limit, state));
perf->pr->performance_platform_limit, state));
return_VALUE(-ENODEV);
}
if (state == pr->performance->state) {
if (state == perf->state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Already at target state (P%d)\n", state));
return_VALUE(0);
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Transitioning from P%d to P%d\n",
pr->performance->state, state));
perf->state, state));
/* cpufreq frequency struct */
cpufreq_freqs.cpu = pr->id;
cpufreq_freqs.old = pr->performance->states[pr->performance->state].core_frequency;
cpufreq_freqs.new = pr->performance->states[state].core_frequency;
cpufreq_freqs.cpu = perf->pr->id;
cpufreq_freqs.old = perf->states[perf->state].core_frequency;
cpufreq_freqs.new = perf->states[state].core_frequency;
/* notify cpufreq */
cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
......@@ -287,8 +276,8 @@ acpi_processor_set_performance (
* control_register.
*/
port = pr->performance->control_register;
value = (u16) pr->performance->states[state].control;
port = perf->control_register;
value = (u16) perf->states[state].control;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Writing 0x%02x to port 0x%04x\n", value, port));
......@@ -302,15 +291,15 @@ acpi_processor_set_performance (
* giving up.
*/
port = pr->performance->status_register;
port = perf->status_register;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Looking for 0x%02x from port 0x%04x\n",
(u8) pr->performance->states[state].status, port));
(u8) perf->states[state].status, port));
for (i=0; i<100; i++) {
value = inb(port);
if (value == (u8) pr->performance->states[state].status)
if (value == (u8) perf->states[state].status)
break;
udelay(10);
}
......@@ -318,7 +307,7 @@ acpi_processor_set_performance (
/* notify cpufreq */
cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
if (value != pr->performance->states[state].status) {
if (value != perf->states[state].status) {
unsigned int tmp = cpufreq_freqs.new;
cpufreq_freqs.new = cpufreq_freqs.old;
cpufreq_freqs.old = tmp;
......@@ -332,11 +321,23 @@ acpi_processor_set_performance (
"Transition successful after %d microseconds\n",
i * 10));
pr->performance->state = state;
perf->state = state;
return_VALUE(0);
}
#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
/* /proc/acpi/processor/../performance interface (DEPRECATED) */
static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file);
static struct file_operations acpi_processor_perf_fops = {
.open = acpi_processor_perf_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_processor *pr = (struct acpi_processor *)seq->private;
......@@ -347,7 +348,7 @@ static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
if (!pr)
goto end;
if (!pr->flags.performance) {
if (!pr->flags.performance || !pr->performance) {
seq_puts(seq, "<not supported>\n");
goto end;
}
......@@ -379,8 +380,8 @@ static int
acpi_processor_write_performance (
struct file *file,
const char *buffer,
unsigned long count,
void *data)
size_t count,
loff_t *data)
{
int result = 0;
struct acpi_processor *pr = (struct acpi_processor *) data;
......@@ -411,24 +412,78 @@ acpi_processor_write_performance (
return_VALUE(count);
}
static void
acpi_cpufreq_add_file (
struct acpi_processor *pr)
{
struct proc_dir_entry *entry = NULL;
struct acpi_device *device = NULL;
ACPI_FUNCTION_TRACE("acpi_cpufreq_addfile");
if (acpi_bus_get_device(pr->handle, &device))
return_VOID;
/* add file 'performance' [R/W] */
entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
S_IFREG|S_IRUGO|S_IWUSR, acpi_device_dir(device));
if (!entry)
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unable to create '%s' fs entry\n",
ACPI_PROCESSOR_FILE_PERFORMANCE));
else {
entry->proc_fops = &acpi_processor_perf_fops;
entry->proc_fops->write = acpi_processor_write_performance;
entry->data = acpi_driver_data(device);
}
return_VOID;
}
static void
acpi_cpufreq_remove_file (
struct acpi_processor *pr)
{
struct acpi_device *device = NULL;
ACPI_FUNCTION_TRACE("acpi_cpufreq_addfile");
if (acpi_bus_get_device(pr->handle, &device))
return_VOID;
/* remove file 'performance' */
remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
acpi_device_dir(device));
return_VOID;
}
#else
static void acpi_cpufreq_add_file (struct acpi_processor *pr) { return; }
static void acpi_cpufreq_remove_file (struct acpi_processor *pr) { return; }
#endif /* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */
static int
acpi_cpufreq_setpolicy (
struct cpufreq_policy *policy)
acpi_cpufreq_target (
struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
struct acpi_processor *pr = performance[policy->cpu].pr;
struct acpi_processor_performance *perf = &performance[policy->cpu];
unsigned int next_state = 0;
unsigned int result = 0;
ACPI_FUNCTION_TRACE("acpi_cpufreq_setpolicy");
result = cpufreq_frequency_table_setpolicy(policy,
&performance[policy->cpu].freq_table[pr->limit.state.px],
result = cpufreq_frequency_table_target(policy,
&perf->freq_table[perf->pr->limit.state.px],
target_freq,
relation,
&next_state);
if (result)
return_VALUE(result);
result = acpi_processor_set_performance (pr, next_state);
result = acpi_processor_set_performance (perf, next_state);
return_VALUE(result);
}
......@@ -439,18 +494,17 @@ acpi_cpufreq_verify (
struct cpufreq_policy *policy)
{
unsigned int result = 0;
unsigned int cpu = policy->cpu;
struct acpi_processor *pr = performance[policy->cpu].pr;
struct acpi_processor_performance *perf = &performance[policy->cpu];
ACPI_FUNCTION_TRACE("acpi_cpufreq_verify");
result = cpufreq_frequency_table_verify(policy,
&performance[cpu].freq_table[pr->limit.state.px]);
&perf->freq_table[perf->pr->limit.state.px]);
cpufreq_verify_within_limits(
policy,
performance[cpu].states[performance[cpu].state_count - 1].core_frequency * 1000,
performance[cpu].states[pr->limit.state.px].core_frequency * 1000);
perf->states[perf->state_count - 1].core_frequency * 1000,
perf->states[perf->pr->limit.state.px].core_frequency * 1000);
return_VALUE(result);
}
......@@ -458,7 +512,7 @@ acpi_cpufreq_verify (
static int
acpi_processor_get_performance_info (
struct acpi_processor *pr)
struct acpi_processor_performance *perf)
{
int result = 0;
acpi_status status = AE_OK;
......@@ -466,31 +520,32 @@ acpi_processor_get_performance_info (
ACPI_FUNCTION_TRACE("acpi_processor_get_performance_info");
if (!pr)
if (!perf || !perf->pr || !perf->pr->handle)
return_VALUE(-EINVAL);
status = acpi_get_handle(pr->handle, "_PCT", &handle);
status = acpi_get_handle(perf->pr->handle, "_PCT", &handle);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"ACPI-based processor performance control unavailable\n"));
return_VALUE(-ENODEV);
}
result = acpi_processor_get_performance_control(pr);
result = acpi_processor_get_performance_control(perf);
if (result)
return_VALUE(result);
result = acpi_processor_get_performance_states(pr);
result = acpi_processor_get_performance_states(perf);
if (result)
return_VALUE(result);
result = acpi_processor_get_platform_limit(pr);
result = acpi_processor_get_platform_limit(perf->pr);
if (result)
return_VALUE(result);
return_VALUE(0);
}
static int
acpi_cpufreq_cpu_init (
struct cpufreq_policy *policy)
......@@ -498,22 +553,18 @@ acpi_cpufreq_cpu_init (
unsigned int i;
unsigned int cpu = policy->cpu;
struct acpi_processor *pr = NULL;
struct acpi_processor_performance *perf = &performance[policy->cpu];
unsigned int result = 0;
struct proc_dir_entry *entry = NULL;
struct acpi_device *device = NULL;
ACPI_FUNCTION_TRACE("acpi_cpufreq_cpu_init");
acpi_processor_register_performance(&performance[cpu], &pr, cpu);
acpi_processor_register_performance(perf, &pr, cpu);
pr = performance[cpu].pr;
if (!pr)
return_VALUE(-ENODEV);
if (acpi_bus_get_device(pr->handle, &device))
return_VALUE(-ENODEV);
result = acpi_processor_get_performance_info(performance[cpu].pr);
result = acpi_processor_get_performance_info(perf);
if (result)
return_VALUE(-ENODEV);
......@@ -523,52 +574,62 @@ acpi_cpufreq_cpu_init (
/* detect transition latency */
policy->cpuinfo.transition_latency = 0;
for (i=0;i<performance[cpu].state_count;i++) {
if (performance[cpu].states[i].transition_latency > policy->cpuinfo.transition_latency)
policy->cpuinfo.transition_latency = performance[cpu].states[i].transition_latency;
for (i=0;i<perf->state_count;i++) {
if (perf->states[i].transition_latency > policy->cpuinfo.transition_latency)
policy->cpuinfo.transition_latency = perf->states[i].transition_latency;
}
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cur = perf->states[pr->limit.state.px].core_frequency * 1000;
/* table init */
for (i=0; i<=performance[cpu].state_count; i++)
for (i=0; i<=perf->state_count; i++)
{
performance[cpu].freq_table[i].index = i;
if (i<performance[cpu].state_count)
performance[cpu].freq_table[i].frequency = performance[cpu].states[i].core_frequency * 1000;
perf->freq_table[i].index = i;
if (i<perf->state_count)
perf->freq_table[i].frequency = perf->states[i].core_frequency * 1000;
else
performance[cpu].freq_table[i].frequency = CPUFREQ_TABLE_END;
perf->freq_table[i].frequency = CPUFREQ_TABLE_END;
}
#ifdef CONFIG_CPU_FREQ_24_API
acpi_cpufreq_driver.cpu_cur_freq[policy->cpu] = performance[cpu].states[pr->limit.state.px].core_frequency * 1000;
#endif
result = cpufreq_frequency_table_cpuinfo(policy, &perf->freq_table[0]);
result = cpufreq_frequency_table_cpuinfo(policy, &performance[cpu].freq_table[0]);
/* add file 'performance' [R/W] */
entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
S_IFREG|S_IRUGO|S_IWUSR, acpi_device_dir(device));
if (!entry)
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"Unable to create '%s' fs entry\n",
ACPI_PROCESSOR_FILE_PERFORMANCE));
else {
entry->proc_fops = &acpi_processor_perf_fops;
entry->write_proc = acpi_processor_write_performance;
entry->data = acpi_driver_data(device);
}
acpi_cpufreq_add_file(pr);
return_VALUE(result);
}
static int
acpi_cpufreq_cpu_exit (
struct cpufreq_policy *policy)
{
struct acpi_processor *pr = performance[policy->cpu].pr;
ACPI_FUNCTION_TRACE("acpi_cpufreq_cpu_exit");
acpi_cpufreq_remove_file(pr);
return_VALUE(0);
}
static struct cpufreq_driver acpi_cpufreq_driver = {
.verify = acpi_cpufreq_verify,
.target = acpi_cpufreq_target,
.init = acpi_cpufreq_cpu_init,
.exit = acpi_cpufreq_cpu_exit,
.name = "acpi-cpufreq",
};
static int __init
acpi_cpufreq_init (void)
{
int result = 0;
int current_state = 0;
int i = 0;
struct acpi_processor *pr;
struct acpi_processor *pr = NULL;
struct acpi_processor_performance *perf = NULL;
ACPI_FUNCTION_TRACE("acpi_cpufreq_init");
......@@ -579,10 +640,9 @@ acpi_cpufreq_init (void)
performance = kmalloc(NR_CPUS * sizeof(struct acpi_processor_performance), GFP_KERNEL);
if (!performance)
return_VALUE(-ENOMEM);
memset(performance, 0, NR_CPUS * sizeof(struct acpi_processor_performance));
/* register struct acpi_performance performance */
/* register struct acpi_processor_performance performance */
for (i=0; i<NR_CPUS; i++) {
if (cpu_online(i))
acpi_processor_register_performance(&performance[i], &pr, i);
......@@ -591,11 +651,13 @@ acpi_cpufreq_init (void)
/* initialize */
for (i=0; i<NR_CPUS; i++) {
if (cpu_online(i) && performance[i].pr)
result = acpi_processor_get_performance_info(performance[i].pr);
result = acpi_processor_get_performance_info(&performance[i]);
}
/* test it on one CPU */
for (i=0; i<NR_CPUS; i++) {
if (cpu_online(i))
continue;
pr = performance[i].pr;
if (pr && pr->flags.performance)
goto found_capable_cpu;
......@@ -604,10 +666,11 @@ acpi_cpufreq_init (void)
goto err;
found_capable_cpu:
current_state = pr->performance->state;
perf = pr->performance;
current_state = perf->state;
if (current_state == pr->limit.state.px) {
result = acpi_processor_set_performance(pr, (pr->performance->state_count - 1));
result = acpi_processor_set_performance(perf, (perf->state_count - 1));
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Disabled P-States due to failure while switching.\n"));
result = -ENODEV;
......@@ -615,7 +678,7 @@ acpi_cpufreq_init (void)
}
}
result = acpi_processor_set_performance(pr, pr->limit.state.px);
result = acpi_processor_set_performance(perf, pr->limit.state.px);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Disabled P-States due to failure while switching.\n"));
result = -ENODEV;
......@@ -623,7 +686,7 @@ acpi_cpufreq_init (void)
}
if (current_state != 0) {
result = acpi_processor_set_performance(pr, current_state);
result = acpi_processor_set_performance(perf, current_state);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Disabled P-States due to failure while switching.\n"));
result = -ENODEV;
......@@ -639,7 +702,7 @@ acpi_cpufreq_init (void)
/* error handling */
err:
/* unregister struct acpi_performance performance */
/* unregister struct acpi_processor_performance performance */
for (i=0; i<NR_CPUS; i++) {
if (performance[i].pr) {
performance[i].pr->flags.performance = 0;
......@@ -647,9 +710,7 @@ acpi_cpufreq_init (void)
performance[i].pr = NULL;
}
}
kfree(performance);
return_VALUE(result);
}
......@@ -668,7 +729,7 @@ acpi_cpufreq_exit (void)
cpufreq_unregister_driver(&acpi_cpufreq_driver);
/* unregister struct acpi_performance performance */
/* unregister struct acpi_processor_performance performance */
for (i=0; i<NR_CPUS; i++) {
if (performance[i].pr) {
performance[i].pr->flags.performance = 0;
......@@ -682,15 +743,6 @@ acpi_cpufreq_exit (void)
return_VOID;
}
static struct cpufreq_driver acpi_cpufreq_driver = {
.verify = acpi_cpufreq_verify,
.setpolicy = acpi_cpufreq_setpolicy,
.init = acpi_cpufreq_cpu_init,
.exit = NULL,
.policy = NULL,
.name = "acpi-cpufreq",
};
late_initcall(acpi_cpufreq_init);
module_exit(acpi_cpufreq_exit);
arch/i386/kernel/cpu/cpufreq/elanfreq.c
View file @ 7e285bef
......@@ -31,15 +31,9 @@
#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
static struct cpufreq_driver *elanfreq_driver;
/* Module parameter */
static int max_freq;
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
struct s_elan_multiplier {
int clock; /* frequency in kHz */
int val40h; /* PMU Force Mode register */
......@@ -127,11 +121,6 @@ static void elanfreq_set_cpu_state (unsigned int state) {
struct cpufreq_freqs freqs;
if (!elanfreq_driver) {
printk(KERN_ERR "cpufreq: initialization problem or invalid target frequency\n");
return;
}
freqs.old = elanfreq_get_cpu_frequency();
freqs.new = elan_multiplier[state].clock;
freqs.cpu = 0; /* elanfreq.c is UP only driver */
......@@ -187,11 +176,13 @@ static int elanfreq_verify (struct cpufreq_policy *policy)
return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
}
static int elanfreq_setpolicy (struct cpufreq_policy *policy)
static int elanfreq_target (struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int newstate = 0;
if (cpufreq_frequency_table_setpolicy(policy, &elanfreq_table[0], &newstate))
if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
return -EINVAL;
elanfreq_set_cpu_state(newstate);
......@@ -204,6 +195,35 @@ static int elanfreq_setpolicy (struct cpufreq_policy *policy)
* Module init and exit code
*/
static int elanfreq_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
unsigned int i;
/* capability check */
if ((c->x86_vendor != X86_VENDOR_AMD) ||
(c->x86 != 4) || (c->x86_model!=10))
return -ENODEV;
/* max freq */
if (!max_freq)
max_freq = elanfreq_get_cpu_frequency();
/* table init */
for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if (elanfreq_table[i].frequency > max_freq)
elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
}
/* cpuinfo and default policy values */
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = elanfreq_get_cpu_frequency();
return cpufreq_frequency_table_cpuinfo(policy, &elanfreq_table[0]);;
}
#ifndef MODULE
/**
* elanfreq_setup - elanfreq command line parameter parsing
......@@ -224,11 +244,18 @@ static int __init elanfreq_setup(char *str)
__setup("elanfreq=", elanfreq_setup);
#endif
static struct cpufreq_driver elanfreq_driver = {
.verify = elanfreq_verify,
.target = elanfreq_target,
.init = elanfreq_cpu_init,
.name = "elanfreq",
};
static int __init elanfreq_init(void)
{
struct cpuinfo_x86 *c = cpu_data;
struct cpufreq_driver *driver;
int ret, i;
/* Test if we have the right hardware */
if ((c->x86_vendor != X86_VENDOR_AMD) ||
......@@ -238,63 +265,22 @@ static int __init elanfreq_init(void)
return -ENODEV;
}
driver = kmalloc(sizeof(struct cpufreq_driver) +
NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
if (!driver)
return -ENOMEM;
memset(driver, 0, sizeof(struct cpufreq_driver) +
NR_CPUS * sizeof(struct cpufreq_policy));
driver->policy = (struct cpufreq_policy *) (driver + 1);
if (!max_freq)
max_freq = elanfreq_get_cpu_frequency();
/* table init */
for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
if (elanfreq_table[i].frequency > max_freq)
elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
}
#ifdef CONFIG_CPU_FREQ_24_API
driver->cpu_cur_freq[0] = elanfreq_get_cpu_frequency();
#endif
driver->verify = &elanfreq_verify;
driver->setpolicy = &elanfreq_setpolicy;
strncpy(driver->name, "elanfreq", CPUFREQ_NAME_LEN);
driver->policy[0].cpu = 0;
ret = cpufreq_frequency_table_cpuinfo(&driver->policy[0], &elanfreq_table[0]);
if (ret) {
kfree(driver);
return ret;
}
driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
elanfreq_driver = driver;
ret = cpufreq_register(driver);
if (ret) {
elanfreq_driver = NULL;
kfree(driver);
}
return ret;
return cpufreq_register_driver(&elanfreq_driver);
}
static void __exit elanfreq_exit(void)
{
if (elanfreq_driver) {
cpufreq_unregister();
kfree(elanfreq_driver);
}
cpufreq_unregister_driver(&elanfreq_driver);
}
module_init(elanfreq_init);
module_exit(elanfreq_exit);
MODULE_PARM (max_freq, "i");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
module_init(elanfreq_init);
module_exit(elanfreq_exit);
arch/i386/kernel/cpu/cpufreq/gx-suspmod.c
View file @ 7e285bef
......@@ -116,7 +116,6 @@ struct gxfreq_params {
struct pci_dev *cs55x0;
};
static struct cpufreq_driver *gx_driver;
static struct gxfreq_params *gx_params;
static int stock_freq;
......@@ -345,7 +344,7 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
unsigned int tmp_freq = 0;
u8 tmp1, tmp2;
if (!gx_driver || !stock_freq || !policy)
if (!stock_freq || !policy)
return -EINVAL;
policy->cpu = 0;
......@@ -375,33 +374,71 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
}
/*
* cpufreq_gx_setpolicy:
* cpufreq_gx_target:
*
*/
static int cpufreq_gx_setpolicy(struct cpufreq_policy *policy)
static int cpufreq_gx_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
u8 tmp1, tmp2;
unsigned int tmp_freq;
if (!gx_driver || !stock_freq || !policy)
if (!stock_freq || !policy)
return -EINVAL;
policy->cpu = 0;
if (policy->policy == CPUFREQ_POLICY_POWERSAVE) {
/* here we need to make sure that we don't set the
* frequency below policy->min (see comment in
* cpufreq_gx_verify() - guarantee of processing
* capacity.
*/
u8 tmp1, tmp2;
unsigned int tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2);
while (tmp_freq < policy->min) {
tmp_freq += stock_freq / max_duration;
tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
}
gx_set_cpuspeed(tmp_freq);
tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2);
while (tmp_freq < policy->min) {
tmp_freq += stock_freq / max_duration;
tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
}
while (tmp_freq > policy->max) {
tmp_freq -= stock_freq / max_duration;
tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2);
}
gx_set_cpuspeed(tmp_freq);
return 0;
}
static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
{
int maxfreq, curfreq;
if (!policy || policy->cpu != 0)
return -ENODEV;
/* determine maximum frequency */
if (pci_busclk) {
maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
} else if (cpu_khz) {
maxfreq = cpu_khz;
} else {
gx_set_cpuspeed(policy->max);
maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
}
stock_freq = maxfreq;
curfreq = gx_get_cpuspeed();
dprintk("cpu max frequency is %d.\n", maxfreq);
dprintk("cpu current frequency is %dkHz.\n",curfreq);
/* setup basic struct for cpufreq API */
policy->cpu = 0;
if (max_duration < POLICY_MIN_DIV)
policy->min = maxfreq / max_duration;
else
policy->min = maxfreq / POLICY_MIN_DIV;
policy->max = maxfreq;
policy->cur = curfreq;
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.min_freq = maxfreq / max_duration;
policy->cpuinfo.max_freq = maxfreq;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
return 0;
}
......@@ -409,11 +446,16 @@ static int cpufreq_gx_setpolicy(struct cpufreq_policy *policy)
* cpufreq_gx_init:
* MediaGX/Geode GX initilize cpufreq driver
*/
static struct cpufreq_driver gx_suspmod_driver = {
.verify = cpufreq_gx_verify,
.target = cpufreq_gx_target,
.init = cpufreq_gx_cpu_init,
.name = "gx-suspmod",
};
static int __init cpufreq_gx_init(void)
{
int maxfreq,ret,curfreq;
struct cpufreq_driver *driver;
int ret;
struct gxfreq_params *params;
struct pci_dev *gx_pci;
u32 class_rev;
......@@ -428,21 +470,13 @@ static int __init cpufreq_gx_init(void)
dprintk("geode suspend modulation available.\n");
driver = kmalloc(sizeof(struct cpufreq_driver) + NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
if (driver == NULL)
return -ENOMEM;
memset(driver, 0, sizeof(struct cpufreq_driver) +
NR_CPUS * sizeof(struct cpufreq_policy));
params = kmalloc(sizeof(struct gxfreq_params), GFP_KERNEL);
if (params == NULL) {
kfree(driver);
if (params == NULL)
return -ENOMEM;
}
memset(params, 0, sizeof(struct gxfreq_params));
driver->policy = (struct cpufreq_policy *)(driver + 1);
params->cs55x0 = gx_pci;
gx_params = params;
/* keep cs55x0 configurations */
pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg));
......@@ -453,45 +487,7 @@ static int __init cpufreq_gx_init(void)
pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev);
params->pci_rev = class_rev && 0xff;
gx_params = params;
/* determine maximum frequency */
if (pci_busclk) {
maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
} else if (cpu_khz) {
maxfreq = cpu_khz;
} else {
maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
}
stock_freq = maxfreq;
curfreq = gx_get_cpuspeed();
dprintk("cpu max frequency is %d.\n", maxfreq);
dprintk("cpu current frequency is %dkHz.\n",curfreq);
/* setup basic struct for cpufreq API */
#ifdef CONFIG_CPU_FREQ_24_API
driver->cpu_cur_freq[0] = curfreq;
#endif
driver->policy[0].cpu = 0;
if (max_duration < POLICY_MIN_DIV)
driver->policy[0].min = maxfreq / max_duration;
else
driver->policy[0].min = maxfreq / POLICY_MIN_DIV;
driver->policy[0].max = maxfreq;
driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
driver->policy[0].cpuinfo.min_freq = maxfreq / max_duration;
driver->policy[0].cpuinfo.max_freq = maxfreq;
driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
driver->verify = &cpufreq_gx_verify;
driver->setpolicy = &cpufreq_gx_setpolicy;
strncpy(driver->name, "gx-suspmod", CPUFREQ_NAME_LEN);
gx_driver = driver;
if ((ret = cpufreq_register(driver))) {
kfree(driver);
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);
return ret; /* register error! */
}
......@@ -501,13 +497,8 @@ static int __init cpufreq_gx_init(void)
static void __exit cpufreq_gx_exit(void)
{
if (gx_driver) {
/* disable throttling */
gx_set_cpuspeed(stock_freq);
cpufreq_unregister();
kfree(gx_driver);
kfree(gx_params);
}
cpufreq_unregister_driver(&gx_suspmod_driver);
kfree(gx_params);
}
MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
......
arch/i386/kernel/cpu/cpufreq/longhaul.c
View file @ 7e285bef
/*
* $Id: longhaul.c,v 1.77 2002/10/31 21:17:40 db Exp $
* $Id: longhaul.c,v 1.87 2003/02/22 10:23:46 db Exp $
*
* (C) 2001 Dave Jones. <davej@suse.de>
* (C) 2002 Padraig Brady. <padraig@antefacto.com>
......@@ -48,6 +48,7 @@ static int vrmrev;
/* Module parameters */
static int prefer_slow_fsb;
static int dont_scale_voltage;
static int dont_scale_fsb;
static int current_fsb;
......@@ -237,7 +238,6 @@ static unsigned int power_fsb_table[] = { 66, 100, 133, -1 };
/* fsb values to favour high fsb speed (for e.g. if lowering CPU
freq because of heat, but want to maintain highest performance possible) */
static unsigned int perf_fsb_table[] = { 133, 100, 66, -1 };
static unsigned int *fsb_search_table;
/* Voltage scales. Div by 1000 to get actual voltage. */
static int __initdata vrm85scales[32] = {
......@@ -260,7 +260,7 @@ static int eblcr_table[32];
static int voltage_table[32];
static int highest_speed, lowest_speed; /* kHz */
static int longhaul; /* version. */
static struct cpufreq_driver *longhaul_driver;
static struct cpufreq_frequency_table *longhaul_table;
static int longhaul_get_cpu_fsb (void)
......@@ -428,7 +428,7 @@ static void longhaul_setstate (unsigned int clock_ratio_index, unsigned int newf
}
static void __init longhaul_get_ranges (void)
static int __init longhaul_get_ranges (void)
{
unsigned long lo, hi, invalue;
unsigned int minmult=0, maxmult=0, minfsb=0, maxfsb=0;
......@@ -436,6 +436,9 @@ static void __init longhaul_get_ranges (void)
50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
-1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
unsigned int fsb_table[4] = { 133, 100, -1, 66 };
unsigned int fsbcount = 1;
unsigned int i, j, k = 0;
static unsigned int *fsb_search_table;
switch (longhaul) {
case 1:
......@@ -472,6 +475,11 @@ static void __init longhaul_get_ranges (void)
dprintk (KERN_INFO "longhaul: Min FSB=%d Max FSB=%d\n",
minfsb, maxfsb);
fsbcount = 0;
for (i=0;i<4;i++) {
if((fsb_table[i] >= minfsb) && (fsb_table[i] <= maxfsb))
fsbcount++;
}
} else {
minfsb = maxfsb = current_fsb;
}
......@@ -480,11 +488,37 @@ static void __init longhaul_get_ranges (void)
highest_speed = maxmult * maxfsb * 100;
lowest_speed = minmult * minfsb * 100;
dprintk (KERN_INFO "longhaul: MinMult(x10)=%d MaxMult(x10)=%d\n",
minmult, maxmult);
minmult, maxmult);
dprintk (KERN_INFO "longhaul: Lowestspeed=%d Highestspeed=%d\n",
lowest_speed, highest_speed);
lowest_speed, highest_speed);
longhaul_table = kmalloc((numscales * fsbcount + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
if(!longhaul_table)
return -ENOMEM;
if (prefer_slow_fsb)
fsb_search_table = perf_fsb_table; // yep, this is right: the last entry is preferred by cpufreq_frequency_table_* ...
else
fsb_search_table = power_fsb_table;
for (i=0; (i<4); i++) {
if ((fsb_search_table[i] > maxfsb) || (fsb_search_table[i] < minfsb) || (fsb_search_table[i] == -1))
continue;
for (j=0; (j<numscales); j++) {
if ((clock_ratio[j] > maxmult) || (clock_ratio[j] < minmult) || (clock_ratio[j] == -1))
continue;
longhaul_table[k].frequency= clock_ratio[j] * fsb_search_table[i] * 100;
longhaul_table[k].index = (j << 8) | (i);
k++;
}
}
longhaul_table[k].frequency = CPUFREQ_TABLE_END;
if (!k)
return -EINVAL;
return 0;
}
......@@ -523,182 +557,34 @@ static void __init longhaul_setup_voltagescaling (unsigned long lo, unsigned lon
}
static inline unsigned int longhaul_statecount_fsb(struct cpufreq_policy *policy, unsigned int fsb) {
unsigned int i, count = 0;
for(i=0; i<numscales; i++) {
if ((clock_ratio[i] != -1) &&
((clock_ratio[i] * fsb * 100) <= policy->max) &&
((clock_ratio[i] * fsb * 100) >= policy->min))
count++;
}
return count;
}
static int longhaul_verify(struct cpufreq_policy *policy)
{
unsigned int number_states = 0;
unsigned int i;
unsigned int fsb_index = 0;
unsigned int tmpfreq = 0;
unsigned int newmax = -1;
if (!policy || !longhaul_driver)
return -EINVAL;
policy->cpu = 0;
cpufreq_verify_within_limits(policy, lowest_speed, highest_speed);
if (can_scale_fsb==1) {
for (fsb_index=0; fsb_search_table[fsb_index]!=-1; fsb_index++)
number_states += longhaul_statecount_fsb(policy, fsb_search_table[fsb_index]);
} else
number_states = longhaul_statecount_fsb(policy, current_fsb);
if (number_states)
return 0;
/* get frequency closest above current policy->max */
if (can_scale_fsb==1) {
for (fsb_index=0; fsb_search_table[fsb_index] != -1; fsb_index++)
for(i=0; i<numscales; i++) {
if (clock_ratio[i] == -1)
continue;
tmpfreq = clock_ratio[i] * fsb_search_table[fsb_index];
if ((tmpfreq > policy->max) &&
(tmpfreq < newmax))
newmax = tmpfreq;
}
} else {
for(i=0; i<numscales; i++) {
if (clock_ratio[i] == -1)
continue;
tmpfreq = clock_ratio[i] * current_fsb;
if ((tmpfreq > policy->max) &&
(tmpfreq < newmax))
newmax = tmpfreq;
}
}
policy->max = newmax;
cpufreq_verify_within_limits(policy, lowest_speed, highest_speed);
return 0;
}
static int longhaul_get_best_freq_for_fsb(struct cpufreq_policy *policy,
unsigned int min_mult,
unsigned int max_mult,
unsigned int fsb,
unsigned int *new_mult)
{
unsigned int optimal = 0;
unsigned int found_optimal = 0;
unsigned int i;
switch(policy->policy) {
case CPUFREQ_POLICY_POWERSAVE:
optimal = max_mult;
break;
case CPUFREQ_POLICY_PERFORMANCE:
optimal = min_mult;
}
for(i=0; i<numscales; i++) {
unsigned int freq = fsb * clock_ratio[i] * 100;
if ((freq > policy->max) ||
(freq < policy->min))
continue;
switch(policy->policy) {
case CPUFREQ_POLICY_POWERSAVE:
if (clock_ratio[i] < clock_ratio[optimal]) {
found_optimal = 1;
optimal = i;
}
break;
case CPUFREQ_POLICY_PERFORMANCE:
if (clock_ratio[i] > clock_ratio[optimal]) {
found_optimal = 1;
optimal = i;
}
break;
}
}
if (found_optimal) {
*new_mult = optimal;
return 1;
}
return 0;
return cpufreq_frequency_table_verify(policy, longhaul_table);
}
static int longhaul_setpolicy (struct cpufreq_policy *policy)
static int longhaul_target (struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int i;
unsigned int fsb_index = 0;
unsigned int new_fsb = 0;
unsigned int new_clock_ratio = 0;
unsigned int min_mult = 0;
unsigned int max_mult = 0;
unsigned int table_index = 0;
unsigned int new_fsb = 0;
unsigned int new_clock_ratio = 0;
if (!longhaul_driver)
if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
return -EINVAL;
if (policy->policy==CPUFREQ_POLICY_PERFORMANCE)
fsb_search_table = perf_fsb_table;
else
fsb_search_table = power_fsb_table;
for(i=0;i<numscales;i++) {
if (clock_ratio[max_mult] < clock_ratio[i])
max_mult = i;
else if (clock_ratio[min_mult] > clock_ratio[i])
min_mult = i;
}
if (can_scale_fsb==1) {
unsigned int found = 0;
for (fsb_index=0; fsb_search_table[fsb_index]!=-1; fsb_index++)
{
if (longhaul_get_best_freq_for_fsb(policy,
min_mult, max_mult,
fsb_search_table[fsb_index],
&new_clock_ratio)) {
new_fsb = fsb_search_table[fsb_index];
break;
}
}
if (!found)
return -EINVAL;
} else {
new_fsb = current_fsb;
if (!longhaul_get_best_freq_for_fsb(policy, min_mult,
max_mult, new_fsb, &new_clock_ratio))
return -EINVAL;
}
new_clock_ratio = longhaul_table[table_index].index & 0xFF;
new_fsb = power_fsb_table[(longhaul_table[table_index].index & 0xFF00) >> 8];
longhaul_setstate(new_clock_ratio, new_fsb);
return 0;
}
static int __init longhaul_init (void)
static int longhaul_cpu_init (struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
unsigned int currentspeed;
static int currentmult;
unsigned long lo, hi;
int ret;
struct cpufreq_driver *driver;
if ((c->x86_vendor != X86_VENDOR_CENTAUR) || (c->x86 !=6) )
return -ENODEV;
......@@ -733,21 +619,12 @@ static int __init longhaul_init (void)
memcpy (eblcr_table, c5m_eblcr, sizeof(c5m_eblcr));
break;
default:
printk (KERN_INFO "longhaul: Unknown VIA CPU. Contact davej@suse.de\n");
return -ENODEV;
}
printk (KERN_INFO "longhaul: VIA CPU detected. Longhaul version %d supported\n", longhaul);
current_fsb = longhaul_get_cpu_fsb();
currentmult = longhaul_get_cpu_mult();
currentspeed = currentmult * current_fsb * 100;
dprintk (KERN_INFO "longhaul: CPU currently at %dMHz (%d x %d.%d)\n",
(currentspeed/1000), current_fsb, currentmult/10, currentmult%10);
if (longhaul==2 || longhaul==3) {
unsigned long lo, hi;
rdmsr (MSR_VIA_LONGHAUL, lo, hi);
if ((lo & (1<<0)) && (dont_scale_voltage==0))
longhaul_setup_voltagescaling (lo, hi);
......@@ -756,57 +633,53 @@ static int __init longhaul_init (void)
can_scale_fsb = 1;
}
longhaul_get_ranges();
driver = kmalloc(sizeof(struct cpufreq_driver) +
NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
if (!driver)
if (longhaul_get_ranges())
return -ENOMEM;
memset(driver, 0, sizeof(struct cpufreq_driver) +
NR_CPUS * sizeof(struct cpufreq_policy));
driver->policy = (struct cpufreq_policy *) (driver + 1);
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
#ifdef CONFIG_CPU_FREQ_24_API
driver->cpu_cur_freq[0] = currentspeed;
#endif
policy->cur = (unsigned int) (longhaul_get_cpu_fsb() * longhaul_get_cpu_mult() * 100);
driver->verify = &longhaul_verify;
driver->setpolicy = &longhaul_setpolicy;
return cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
}
strncpy(driver->name, "longhaul", CPUFREQ_NAME_LEN);
static struct cpufreq_driver longhaul_driver = {
.verify = longhaul_verify,
.target = longhaul_target,
.init = longhaul_cpu_init,
.name = "longhaul",
};
driver->policy[0].cpu = 0;
driver->policy[0].min = (unsigned int) lowest_speed;
driver->policy[0].max = (unsigned int) highest_speed;
driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
driver->policy[0].cpuinfo.min_freq = (unsigned int) lowest_speed;
driver->policy[0].cpuinfo.max_freq = (unsigned int) highest_speed;
driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
static int __init longhaul_init (void)
{
struct cpuinfo_x86 *c = cpu_data;
longhaul_driver = driver;
if ((c->x86_vendor != X86_VENDOR_CENTAUR) || (c->x86 !=6) )
return -ENODEV;
ret = cpufreq_register(driver);
if (ret) {
longhaul_driver = NULL;
kfree(driver);
switch (c->x86_model) {
case 6 ... 7:
return cpufreq_register_driver(&longhaul_driver);
case 8:
return -ENODEV;
default:
printk (KERN_INFO "longhaul: Unknown VIA CPU. Contact davej@suse.de\n");
}
return ret;
return -ENODEV;
}
static void __exit longhaul_exit (void)
{
if (longhaul_driver) {
cpufreq_unregister();
kfree(longhaul_driver);
}
cpufreq_unregister_driver(&longhaul_driver);
kfree(longhaul_table);
}
MODULE_PARM (dont_scale_fsb, "i");
MODULE_PARM (dont_scale_voltage, "i");
MODULE_PARM (current_fsb, "i");
MODULE_PARM (prefer_slow_fsb, "i");
MODULE_AUTHOR ("Dave Jones <davej@suse.de>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
......
arch/i386/kernel/cpu/cpufreq/longrun.c
View file @ 7e285bef
/*
* $Id: longrun.c,v 1.22 2003/02/10 17:31:50 db Exp $
* $Id: longrun.c,v 1.25 2003/02/28 16:03:50 db Exp $
*
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
*
......@@ -244,10 +244,6 @@ static int longrun_cpu_init(struct cpufreq_policy *policy)
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
longrun_get_policy(policy);
#ifdef CONFIG_CPU_FREQ_24_API
longrun_driver.cpu_cur_freq[policy->cpu] = longrun_low_freq; /* dummy value */
#endif
return 0;
}
......
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
View file @ 7e285bef
......@@ -49,8 +49,6 @@ enum {
static int has_N44_O17_errata[NR_CPUS];
static int stock_freq;
static struct cpufreq_driver p4clockmod_driver;
static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
{
......@@ -220,9 +218,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
/* cpuinfo and default policy values */
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = 1000;
#ifdef CONFIG_CPU_FREQ_24_API
p4clockmod_driver.cpu_cur_freq[policy->cpu] = stock_freq;
#endif
policy->cur = stock_freq;
return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
}
......
arch/i386/kernel/cpu/cpufreq/powernow-k6.c
View file @ 7e285bef
/*
* $Id: powernow-k6.c,v 1.36 2002/10/31 21:17:40 db Exp $
* $Id: powernow-k6.c,v 1.48 2003/02/22 10:23:46 db Exp $
* This file was part of Powertweak Linux (http://powertweak.sf.net)
* and is shared with the Linux Kernel module.
*
* (C) 2000-2002 Dave Jones, Arjan van de Ven, Janne Pnkl, Dominik Brodowski.
* (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pnkl, Dominik Brodowski.
*
* Licensed under the terms of the GNU GPL License version 2.
*
......@@ -25,7 +25,6 @@
#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long
as it is unused */
static struct cpufreq_driver *powernow_driver;
static unsigned int busfreq; /* FSB, in 10 kHz */
static unsigned int max_multiplier;
......@@ -77,8 +76,8 @@ static void powernow_k6_set_state (unsigned int best_i)
unsigned long msrval;
struct cpufreq_freqs freqs;
if (!powernow_driver) {
printk(KERN_ERR "cpufreq: initialization problem or invalid target frequency\n");
if (clock_ratio[best_i].index > max_multiplier) {
printk(KERN_ERR "cpufreq: invalid target frequency\n");
return;
}
......@@ -126,11 +125,13 @@ static int powernow_k6_verify(struct cpufreq_policy *policy)
*
* sets a new CPUFreq policy
*/
static int powernow_k6_setpolicy (struct cpufreq_policy *policy)
static int powernow_k6_target (struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int newstate = 0;
if (cpufreq_frequency_table_setpolicy(policy, &clock_ratio[0], &newstate))
if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate))
return -EINVAL;
powernow_k6_set_state(newstate);
......@@ -139,6 +140,59 @@ static int powernow_k6_setpolicy (struct cpufreq_policy *policy)
}
static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
unsigned int i;
/* capability check */
if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
((c->x86_model != 12) && (c->x86_model != 13)))
return -ENODEV;
if (policy->cpu != 0)
return -ENODEV;
/* get frequencies */
max_multiplier = powernow_k6_get_cpu_multiplier();
busfreq = cpu_khz / max_multiplier;
/* table init */
for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
if (clock_ratio[i].index > max_multiplier)
clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
else
clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
}
/* cpuinfo and default policy values */
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = busfreq * max_multiplier;
return cpufreq_frequency_table_cpuinfo(policy, &clock_ratio[0]);
}
static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
{
unsigned int i;
for (i=0; i<8; i++) {
if (i==max_multiplier)
powernow_k6_set_state(i);
}
return 0;
}
static struct cpufreq_driver powernow_k6_driver = {
.verify = powernow_k6_verify,
.target = powernow_k6_target,
.init = powernow_k6_cpu_init,
.exit = powernow_k6_cpu_exit,
.name = "powernow-k6",
};
/**
* powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
*
......@@ -149,68 +203,22 @@ static int powernow_k6_setpolicy (struct cpufreq_policy *policy)
static int __init powernow_k6_init(void)
{
struct cpuinfo_x86 *c = cpu_data;
struct cpufreq_driver *driver;
unsigned int result;
unsigned int i;
if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
((c->x86_model != 12) && (c->x86_model != 13)))
return -ENODEV;
max_multiplier = powernow_k6_get_cpu_multiplier();
busfreq = cpu_khz / max_multiplier;
if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
printk("cpufreq: PowerNow IOPORT region already used.\n");
return -EIO;
}
/* initialization of main "cpufreq" code*/
driver = kmalloc(sizeof(struct cpufreq_driver) +
NR_CPUS * sizeof(struct cpufreq_policy), GFP_KERNEL);
if (!driver) {
if (cpufreq_register_driver(&powernow_k6_driver)) {
release_region (POWERNOW_IOPORT, 16);
return -ENOMEM;
}
memset(driver, 0, sizeof(struct cpufreq_driver) +
NR_CPUS * sizeof(struct cpufreq_policy));
driver->policy = (struct cpufreq_policy *) (driver + 1);
/* table init */
for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
if (clock_ratio[i].index > max_multiplier)
clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
else
clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
}
driver->verify = &powernow_k6_verify;
driver->setpolicy = &powernow_k6_setpolicy;
strncpy(driver->name, "powernow-k6", CPUFREQ_NAME_LEN);
/* cpuinfo and default policy values */
driver->policy[0].cpu = 0;
driver->policy[0].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
driver->policy[0].policy = CPUFREQ_POLICY_PERFORMANCE;
#ifdef CONFIG_CPU_FREQ_24_API
driver->cpu_cur_freq[0] = busfreq * max_multiplier;
#endif
result = cpufreq_frequency_table_cpuinfo(&driver->policy[0], &clock_ratio[0]);
if (result) {
kfree(driver);
return result;
}
powernow_driver = driver;
result = cpufreq_register(driver);
if (result) {
release_region (POWERNOW_IOPORT, 16);
powernow_driver = NULL;
kfree(driver);
return -EINVAL;
}
return result;
return 0;
}
......@@ -221,20 +229,14 @@ static int __init powernow_k6_init(void)
*/
static void __exit powernow_k6_exit(void)
{
unsigned int i;
if (powernow_driver) {
for (i=0;i<8;i++)
if (clock_ratio[i].index == max_multiplier)
powernow_k6_set_state(i);
cpufreq_unregister();
kfree(powernow_driver);
}
cpufreq_unregister_driver(&powernow_k6_driver);
release_region (POWERNOW_IOPORT, 16);
}
MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@suse.de>, Dominik Brodowski <linux@brodo.de>");
MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
MODULE_LICENSE ("GPL");
module_init(powernow_k6_init);
module_exit(powernow_k6_exit);
arch/i386/kernel/cpu/cpufreq/powernow-k7.c
View file @ 7e285bef
/*
* $Id: powernow-k7.c,v 1.31 2003/02/12 21:16:35 davej Exp $
* $Id: powernow-k7.c,v 1.34 2003/02/22 10:23:46 db Exp $
*
* (C) 2003 Dave Jones <davej@suse.de>
*
......@@ -72,8 +72,6 @@ static int fid_codes[32] = {
150, 225, 160, 165, 170, 180, -1, -1,
};
static struct cpufreq_driver powernow_driver;
static struct cpufreq_frequency_table *powernow_table;
static unsigned int can_scale_bus;
......@@ -369,13 +367,18 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = latency;
#ifdef CONFIG_CPU_FREQ_24_API
powernow_driver.cpu_cur_freq[policy->cpu] = maximum_speed;
#endif
policy->cur = maximum_speed;
return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
}
static struct cpufreq_driver powernow_driver = {
.verify = powernow_verify,
.target = powernow_target,
.init = powernow_cpu_init,
.name = "powernow-k7",
};
static int __init powernow_init (void)
{
if (check_powernow()==0)
......@@ -391,14 +394,6 @@ static void __exit powernow_exit (void)
kfree(powernow_table);
}
static struct cpufreq_driver powernow_driver = {
.verify = powernow_verify,
.target = powernow_target,
.init = powernow_cpu_init,
.name = "powernow-k7",
};
MODULE_AUTHOR ("Dave Jones <davej@suse.de>");
MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
MODULE_LICENSE ("GPL");
......
arch/i386/kernel/cpu/cpufreq/speedstep.c
View file @ 7e285bef
/*
* $Id: speedstep.c,v 1.68 2003/01/20 17:31:47 db Exp $
* $Id: speedstep.c,v 1.70 2003/02/22 10:23:46 db Exp $
*
* (C) 2001 Dave Jones, Arjan van de ven.
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
......@@ -30,8 +30,6 @@
#include <asm/msr.h>
static struct cpufreq_driver speedstep_driver;
/* speedstep_chipset:
* It is necessary to know which chipset is used. As accesses to
* this device occur at various places in this module, we need a
......@@ -629,9 +627,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
policy->policy = (speed == speedstep_low_freq) ?
CPUFREQ_POLICY_POWERSAVE : CPUFREQ_POLICY_PERFORMANCE;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
#ifdef CONFIG_CPU_FREQ_24_API
speedstep_driver.cpu_cur_freq[policy->cpu] = speed;
#endif
policy->cur = speed;
return cpufreq_frequency_table_cpuinfo(policy, &speedstep_freqs[0]);
}
......@@ -686,7 +682,7 @@ static int __init speedstep_init(void)
return -ENODEV;
}
dprintk(KERN_INFO "cpufreq: Intel(R) SpeedStep(TM) support $Revision: 1.68 $\n");
dprintk(KERN_INFO "cpufreq: Intel(R) SpeedStep(TM) support $Revision: 1.70 $\n");
/* activate speedstep support */
if (speedstep_activate())
......
drivers/char/Makefile
View file @ 7e285bef
......@@ -83,7 +83,7 @@ obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
clean-files := consolemap_deftbl.c defkeymap.c qtronixmap.c
$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
$(call do_cmd,CONMK $@,$(objtree)/scripts/conmakehash $< > $@)
$(call do_cmd,CONMK $@,$(objtree)/scripts/conmakehash $< > $@)
$(obj)/defkeymap.o: $(obj)/defkeymap.c
......
drivers/cpufreq/Kconfig
View file @ 7e285bef
......@@ -9,3 +9,30 @@ config CPU_FREQ_PROC_INTF
For details, take a look at linux/Documentation/cpufreq.
If in doubt, say N.
config CPU_FREQ_GOV_USERSPACE
tristate "'userspace' governor for userspace frequency scaling"
depends on CPU_FREQ
help
Enable this cpufreq governor when you either want to set the
CPU frequency manually or when an userspace programm shall
be able to set the CPU dynamically, like on LART
( http://www.lart.tudelft.nl/ )
For details, take a look at linux/Documentation/cpufreq.
If in doubt, say Y.
config CPU_FREQ_24_API
bool "/proc/sys/cpu/ interface (2.4. / OLD)"
depends on CPU_FREQ && SYSCTL && CPU_FREQ_GOV_USERSPACE
help
This enables the /proc/sys/cpu/ sysctl interface for controlling
the CPUFreq,"userspace" governor. This is the same interface
as known from the.4.-kernel patches for CPUFreq, and offers
the same functionality as long as "userspace" is the
selected governor for the specified CPU.
For details, take a look at linux/Documentation/cpufreq.
If in doubt, say N.
drivers/cpufreq/Makefile
View file @ 7e285bef
#CPUfreq governors and cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
obj-$(CONFIG_CPU_FREQ_PROC_INTF) += proc_intf.o
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += userspace.o
drivers/cpufreq/userspace.c 0 → 100644
View file @ 7e285bef
/*
* drivers/cpufreq/userspace.c
*
* Copyright (C) 2001 Russell King
* (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
*
* $Id:$
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/cpufreq.h>
#include <linux/sysctl.h>
#include <linux/types.h>
#include <linux/fs.h>
#include <asm/uaccess.h>
#define CTL_CPU_VARS_SPEED_MAX(cpunr) { \
.ctl_name = CPU_NR_FREQ_MAX, \
.data = &cpu_max_freq[cpunr], \
.procname = "speed-max", \
.maxlen = sizeof(cpu_max_freq[cpunr]),\
.mode = 0444, \
.proc_handler = proc_dointvec, }
#define CTL_CPU_VARS_SPEED_MIN(cpunr) { \
.ctl_name = CPU_NR_FREQ_MIN, \
.data = &cpu_min_freq[cpunr], \
.procname = "speed-min", \
.maxlen = sizeof(cpu_min_freq[cpunr]),\
.mode = 0444, \
.proc_handler = proc_dointvec, }
#define CTL_CPU_VARS_SPEED(cpunr) { \
.ctl_name = CPU_NR_FREQ, \
.procname = "speed", \
.mode = 0644, \
.proc_handler = cpufreq_procctl, \
.strategy = cpufreq_sysctl, \
.extra1 = (void*) (cpunr), }
#define CTL_TABLE_CPU_VARS(cpunr) static ctl_table ctl_cpu_vars_##cpunr[] = {\
CTL_CPU_VARS_SPEED_MAX(cpunr), \
CTL_CPU_VARS_SPEED_MIN(cpunr), \
CTL_CPU_VARS_SPEED(cpunr), \
{ .ctl_name = 0, }, }
/* the ctl_table entry for each CPU */
#define CPU_ENUM(s) { \
.ctl_name = (CPU_NR + s), \
.procname = #s, \
.mode = 0555, \
.child = ctl_cpu_vars_##s }
/**
* A few values needed by the userspace governor
*/
static unsigned int cpu_max_freq[NR_CPUS];
static unsigned int cpu_min_freq[NR_CPUS];
static unsigned int cpu_cur_freq[NR_CPUS];
static unsigned int cpu_is_managed[NR_CPUS];
static struct cpufreq_policy current_policy[NR_CPUS];
static DECLARE_MUTEX (userspace_sem);
/* keep track of frequency transitions */
static int
userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
void *data)
{
struct cpufreq_freqs *freq = data;
cpu_cur_freq[freq->cpu] = freq->new;
return 0;
}
static struct notifier_block userspace_cpufreq_notifier_block = {
.notifier_call = userspace_cpufreq_notifier
};
/**
* cpufreq_set - set the CPU frequency
* @freq: target frequency in kHz
* @cpu: CPU for which the frequency is to be set
*
* Sets the CPU frequency to freq.
*/
int cpufreq_set(unsigned int freq, unsigned int cpu)
{
int ret = -EINVAL;
down(&userspace_sem);
if (!cpu_is_managed[cpu])
goto err;
if (freq < cpu_min_freq[cpu])
freq = cpu_min_freq[cpu];
if (freq > cpu_max_freq[cpu])
freq = cpu_max_freq[cpu];
ret = cpufreq_driver_target_l(&current_policy[cpu], freq,
CPUFREQ_RELATION_L);
err:
up(&userspace_sem);
return ret;
}
EXPORT_SYMBOL_GPL(cpufreq_set);
/**
* cpufreq_setmax - set the CPU to the maximum frequency
* @cpu - affected cpu;
*
* Sets the CPU frequency to the maximum frequency supported by
* this CPU.
*/
int cpufreq_setmax(unsigned int cpu)
{
if (!cpu_is_managed[cpu] || !cpu_online(cpu))
return -EINVAL;
return cpufreq_set(cpu_max_freq[cpu], cpu);
}
EXPORT_SYMBOL_GPL(cpufreq_setmax);
/**
* cpufreq_get - get the current CPU frequency (in kHz)
* @cpu: CPU number
*
* Get the CPU current (static) CPU frequency
*/
unsigned int cpufreq_get(unsigned int cpu)
{
return cpu_cur_freq[cpu];
}
EXPORT_SYMBOL(cpufreq_get);
#ifdef CONFIG_CPU_FREQ_24_API
/*********************** cpufreq_sysctl interface ********************/
static int
cpufreq_procctl(ctl_table *ctl, int write, struct file *filp,
void *buffer, size_t *lenp)
{
char buf[16], *p;
int cpu = (int) ctl->extra1;
int len, left = *lenp;
if (!left || (filp->f_pos && !write) || !cpu_online(cpu)) {
*lenp = 0;
return 0;
}
if (write) {
unsigned int freq;
len = left;
if (left > sizeof(buf))
left = sizeof(buf);
if (copy_from_user(buf, buffer, left))
return -EFAULT;
buf[sizeof(buf) - 1] = '\0';
freq = simple_strtoul(buf, &p, 0);
cpufreq_set(freq, cpu);
} else {
len = sprintf(buf, "%d\n", cpufreq_get(cpu));
if (len > left)
len = left;
if (copy_to_user(buffer, buf, len))
return -EFAULT;
}
*lenp = len;
filp->f_pos += len;
return 0;
}
static int
cpufreq_sysctl(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen, void **context)
{
int cpu = (int) table->extra1;
if (!cpu_online(cpu))
return -EINVAL;
if (oldval && oldlenp) {
size_t oldlen;
if (get_user(oldlen, oldlenp))
return -EFAULT;
if (oldlen != sizeof(unsigned int))
return -EINVAL;
if (put_user(cpufreq_get(cpu), (unsigned int *)oldval) ||
put_user(sizeof(unsigned int), oldlenp))
return -EFAULT;
}
if (newval && newlen) {
unsigned int freq;
if (newlen != sizeof(unsigned int))
return -EINVAL;
if (get_user(freq, (unsigned int *)newval))
return -EFAULT;
cpufreq_set(freq, cpu);
}
return 1;
}
/* ctl_table ctl_cpu_vars_{0,1,...,(NR_CPUS-1)} */
/* due to NR_CPUS tweaking, a lot of if/endifs are required, sorry */
CTL_TABLE_CPU_VARS(0);
#if NR_CPUS > 1
CTL_TABLE_CPU_VARS(1);
#endif
#if NR_CPUS > 2
CTL_TABLE_CPU_VARS(2);
#endif
#if NR_CPUS > 3
CTL_TABLE_CPU_VARS(3);
#endif
#if NR_CPUS > 4
CTL_TABLE_CPU_VARS(4);
#endif
#if NR_CPUS > 5
CTL_TABLE_CPU_VARS(5);
#endif
#if NR_CPUS > 6
CTL_TABLE_CPU_VARS(6);
#endif
#if NR_CPUS > 7
CTL_TABLE_CPU_VARS(7);
#endif
#if NR_CPUS > 8
CTL_TABLE_CPU_VARS(8);
#endif
#if NR_CPUS > 9
CTL_TABLE_CPU_VARS(9);
#endif
#if NR_CPUS > 10
CTL_TABLE_CPU_VARS(10);
#endif
#if NR_CPUS > 11
CTL_TABLE_CPU_VARS(11);
#endif
#if NR_CPUS > 12
CTL_TABLE_CPU_VARS(12);
#endif
#if NR_CPUS > 13
CTL_TABLE_CPU_VARS(13);
#endif
#if NR_CPUS > 14
CTL_TABLE_CPU_VARS(14);
#endif
#if NR_CPUS > 15
CTL_TABLE_CPU_VARS(15);
#endif
#if NR_CPUS > 16
CTL_TABLE_CPU_VARS(16);
#endif
#if NR_CPUS > 17
CTL_TABLE_CPU_VARS(17);
#endif
#if NR_CPUS > 18
CTL_TABLE_CPU_VARS(18);
#endif
#if NR_CPUS > 19
CTL_TABLE_CPU_VARS(19);
#endif
#if NR_CPUS > 20
CTL_TABLE_CPU_VARS(20);
#endif
#if NR_CPUS > 21
CTL_TABLE_CPU_VARS(21);
#endif
#if NR_CPUS > 22
CTL_TABLE_CPU_VARS(22);
#endif
#if NR_CPUS > 23
CTL_TABLE_CPU_VARS(23);
#endif
#if NR_CPUS > 24
CTL_TABLE_CPU_VARS(24);
#endif
#if NR_CPUS > 25
CTL_TABLE_CPU_VARS(25);
#endif
#if NR_CPUS > 26
CTL_TABLE_CPU_VARS(26);
#endif
#if NR_CPUS > 27
CTL_TABLE_CPU_VARS(27);
#endif
#if NR_CPUS > 28
CTL_TABLE_CPU_VARS(28);
#endif
#if NR_CPUS > 29
CTL_TABLE_CPU_VARS(29);
#endif
#if NR_CPUS > 30
CTL_TABLE_CPU_VARS(30);
#endif
#if NR_CPUS > 31
CTL_TABLE_CPU_VARS(31);
#endif
#if NR_CPUS > 32
#error please extend CPU enumeration
#endif
/* due to NR_CPUS tweaking, a lot of if/endifs are required, sorry */
static ctl_table ctl_cpu_table[NR_CPUS + 1] = {
CPU_ENUM(0),
#if NR_CPUS > 1
CPU_ENUM(1),
#endif
#if NR_CPUS > 2
CPU_ENUM(2),
#endif
#if NR_CPUS > 3
CPU_ENUM(3),
#endif
#if NR_CPUS > 4
CPU_ENUM(4),
#endif
#if NR_CPUS > 5
CPU_ENUM(5),
#endif
#if NR_CPUS > 6
CPU_ENUM(6),
#endif
#if NR_CPUS > 7
CPU_ENUM(7),
#endif
#if NR_CPUS > 8
CPU_ENUM(8),
#endif
#if NR_CPUS > 9
CPU_ENUM(9),
#endif
#if NR_CPUS > 10
CPU_ENUM(10),
#endif
#if NR_CPUS > 11
CPU_ENUM(11),
#endif
#if NR_CPUS > 12
CPU_ENUM(12),
#endif
#if NR_CPUS > 13
CPU_ENUM(13),
#endif
#if NR_CPUS > 14
CPU_ENUM(14),
#endif
#if NR_CPUS > 15
CPU_ENUM(15),
#endif
#if NR_CPUS > 16
CPU_ENUM(16),
#endif
#if NR_CPUS > 17
CPU_ENUM(17),
#endif
#if NR_CPUS > 18
CPU_ENUM(18),
#endif
#if NR_CPUS > 19
CPU_ENUM(19),
#endif
#if NR_CPUS > 20
CPU_ENUM(20),
#endif
#if NR_CPUS > 21
CPU_ENUM(21),
#endif
#if NR_CPUS > 22
CPU_ENUM(22),
#endif
#if NR_CPUS > 23
CPU_ENUM(23),
#endif
#if NR_CPUS > 24
CPU_ENUM(24),
#endif
#if NR_CPUS > 25
CPU_ENUM(25),
#endif
#if NR_CPUS > 26
CPU_ENUM(26),
#endif
#if NR_CPUS > 27
CPU_ENUM(27),
#endif
#if NR_CPUS > 28
CPU_ENUM(28),
#endif
#if NR_CPUS > 29
CPU_ENUM(29),
#endif
#if NR_CPUS > 30
CPU_ENUM(30),
#endif
#if NR_CPUS > 31
CPU_ENUM(31),
#endif
#if NR_CPUS > 32
#error please extend CPU enumeration
#endif
{
.ctl_name = 0,
}
};
static ctl_table ctl_cpu[2] = {
{
.ctl_name = CTL_CPU,
.procname = "cpu",
.mode = 0555,
.child = ctl_cpu_table,
},
{
.ctl_name = 0,
}
};
struct ctl_table_header *cpufreq_sysctl_table;
static inline void cpufreq_sysctl_init(void)
{
cpufreq_sysctl_table = register_sysctl_table(ctl_cpu, 0);
}
static inline void cpufreq_sysctl_exit(void)
{
unregister_sysctl_table(cpufreq_sysctl_table);
}
#else
#define cpufreq_sysctl_init() do {} while(0)
#define cpufreq_sysctl_exit() do {} while(0)
#endif /* CONFIG_CPU_FREQ_24API */
/************************** sysfs interface ************************/
static inline int to_cpu_nr (struct device *dev)
{
struct sys_device * cpu_sys_dev = container_of(dev, struct sys_device, dev);
return (cpu_sys_dev->id);
}
static ssize_t show_speed (struct device *dev, char *buf)
{
unsigned int cpu = to_cpu_nr(dev);
return sprintf (buf, "%u\n", cpu_cur_freq[cpu]);
}
static ssize_t
store_speed (struct device *dev, const char *buf, size_t count)
{
unsigned int cpu = to_cpu_nr(dev);
unsigned int freq = 0;
unsigned int ret;
ret = sscanf (buf, "%u", &freq);
if (ret != 1)
return -EINVAL;
cpufreq_set(freq, cpu);
return count;
}
static DEVICE_ATTR(scaling_setspeed, (S_IRUGO | S_IWUSR), show_speed, store_speed);
static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
unsigned int event)
{
unsigned int cpu = policy->cpu;
switch (event) {
case CPUFREQ_GOV_START:
if ((!cpu_online(cpu)) || (!try_module_get(THIS_MODULE)) ||
!policy->cur)
return -EINVAL;
down(&userspace_sem);
cpu_is_managed[cpu] = 1;
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
cpu_cur_freq[cpu] = policy->cur;
device_create_file (policy->intf.dev, &dev_attr_scaling_setspeed);
memcpy (&current_policy[cpu], policy, sizeof(struct cpufreq_policy));
up(&userspace_sem);
break;
case CPUFREQ_GOV_STOP:
down(&userspace_sem);
cpu_is_managed[cpu] = 0;
cpu_min_freq[cpu] = 0;
cpu_max_freq[cpu] = 0;
device_remove_file (policy->intf.dev, &dev_attr_scaling_setspeed);
up(&userspace_sem);
module_put(THIS_MODULE);
break;
case CPUFREQ_GOV_LIMITS:
down(&userspace_sem);
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
if (policy->max < cpu_cur_freq[cpu])
cpufreq_driver_target(&current_policy[cpu], policy->max,
CPUFREQ_RELATION_H);
else if (policy->min > cpu_cur_freq[cpu])
cpufreq_driver_target(&current_policy[cpu], policy->min,
CPUFREQ_RELATION_L);
memcpy (&current_policy[cpu], policy, sizeof(struct cpufreq_policy));
up(&userspace_sem);
break;
}
return 0;
}
/* on ARM SA1100 we need to rely on the values of cpufreq_get() - because
* of this, cpu_cur_freq[] needs to be set early.
*/
#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_SA1100)
extern unsigned int sa11x0_getspeed(void);
static void cpufreq_sa11x0_compat(void)
{
cpu_cur_freq[0] = sa11x0_getspeed();
}
#else
#define cpufreq_sa11x0_compat() do {} while(0)
#endif
static struct cpufreq_governor cpufreq_gov_userspace = {
.name = "userspace",
.governor = cpufreq_governor_userspace,
.owner = THIS_MODULE,
};
EXPORT_SYMBOL(cpufreq_gov_userspace);
static int already_init = 0;
int cpufreq_gov_userspace_init(void)
{
if (!already_init) {
down(&userspace_sem);
cpufreq_sa11x0_compat();
cpufreq_sysctl_init();
cpufreq_register_notifier(&userspace_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
already_init = 1;
up(&userspace_sem);
}
return cpufreq_register_governor(&cpufreq_gov_userspace);
}
EXPORT_SYMBOL(cpufreq_gov_userspace_init);
static void __exit cpufreq_gov_userspace_exit(void)
{
cpufreq_unregister_governor(&cpufreq_gov_userspace);
cpufreq_unregister_notifier(&userspace_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
cpufreq_sysctl_exit();
}
MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>, Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION ("CPUfreq policy governor 'userspace'");
MODULE_LICENSE ("GPL");
module_init(cpufreq_gov_userspace_init);
module_exit(cpufreq_gov_userspace_exit);
drivers/net/via-rhine.c
View file @ 7e285bef
......@@ -108,11 +108,18 @@
- New reset code uses "force reset" cmd on Rhine-II
- Various clean ups
LK1.1.17 (Roger Luethi)
- Fix race in via_rhine_start_tx()
- On errors, wait for Tx engine to turn off before scavenging
- Handle Tx descriptor write-back race on Rhine-II
- Force flushing for PCI posted writes
- More reset code changes
*/
#define DRV_NAME "via-rhine"
#define DRV_VERSION "1.1.16"
#define DRV_RELDATE "February-15-2003"
#define DRV_VERSION "1.1.17"
#define DRV_RELDATE "March-1-2003"
/* A few user-configurable values.
......@@ -562,7 +569,7 @@ static void wait_for_reset(struct net_device *dev, int chip_id, char *name)
/* VT86C100A may need long delay after reset (dlink) */
/* Seen on Rhine-II as well (rl) */
while ((readw(ioaddr + ChipCmd) & CmdReset) && --boguscnt);
while ((readw(ioaddr + ChipCmd) & CmdReset) && --boguscnt)
udelay(5);
}
......
include/linux/cpufreq.h
View file @ 7e285bef
......@@ -62,6 +62,8 @@ struct cpufreq_policy {
unsigned int cpu; /* cpu nr or CPUFREQ_ALL_CPUS */
unsigned int min; /* in kHz */
unsigned int max; /* in kHz */
unsigned int cur; /* in kHz, only needed if cpufreq
* governors are used */
unsigned int policy; /* see above */
struct cpufreq_governor *governor; /* see below */
struct cpufreq_cpuinfo cpuinfo; /* see above */
......@@ -164,10 +166,6 @@ struct cpufreq_driver {
/* optional, for the moment */
int (*init) (struct cpufreq_policy *policy);
int (*exit) (struct cpufreq_policy *policy);
/* 2.4. compatible API */
#ifdef CONFIG_CPU_FREQ_24_API
unsigned int cpu_cur_freq[NR_CPUS];
#endif
};
int cpufreq_register_driver(struct cpufreq_driver *driver_data);
......@@ -208,14 +206,19 @@ int cpufreq_restore(void);
/* the proc_intf.c needs this */
int cpufreq_parse_governor (char *str_governor, unsigned int *policy, struct cpufreq_governor **governor);
#ifdef CONFIG_CPU_FREQ_24_API
#if defined(CONFIG_CPU_FREQ_GOV_USERSPACE) || defined(CONFIG_CPU_FREQ_GOV_USERSPACE_MODULE)
/*********************************************************************
* CPUFREQ 2.4. INTERFACE *
* CPUFREQ USERSPACE GOVERNOR *
*********************************************************************/
extern struct cpufreq_governor cpufreq_gov_userspace;
int cpufreq_gov_userspace_init(void);
int cpufreq_setmax(unsigned int cpu);
int cpufreq_set(unsigned int kHz, unsigned int cpu);
unsigned int cpufreq_get(unsigned int cpu);
#ifdef CONFIG_CPU_FREQ_24_API
/* /proc/sys/cpu */
enum {
CPU_NR = 1, /* compatibilty reasons */
......@@ -260,45 +263,10 @@ enum {
CPU_NR_FREQ = 3,
};
#define CTL_CPU_VARS_SPEED_MAX(cpunr) { \
.ctl_name = CPU_NR_FREQ_MAX, \
.data = &cpu_max_freq[cpunr], \
.procname = "speed-max", \
.maxlen = sizeof(cpu_max_freq[cpunr]),\
.mode = 0444, \
.proc_handler = proc_dointvec, }
#define CTL_CPU_VARS_SPEED_MIN(cpunr) { \
.ctl_name = CPU_NR_FREQ_MIN, \
.data = &cpu_min_freq[cpunr], \
.procname = "speed-min", \
.maxlen = sizeof(cpu_min_freq[cpunr]),\
.mode = 0444, \
.proc_handler = proc_dointvec, }
#define CTL_CPU_VARS_SPEED(cpunr) { \
.ctl_name = CPU_NR_FREQ, \
.procname = "speed", \
.mode = 0644, \
.proc_handler = cpufreq_procctl, \
.strategy = cpufreq_sysctl, \
.extra1 = (void*) (cpunr), }
#define CTL_TABLE_CPU_VARS(cpunr) static ctl_table ctl_cpu_vars_##cpunr[] = {\
CTL_CPU_VARS_SPEED_MAX(cpunr), \
CTL_CPU_VARS_SPEED_MIN(cpunr), \
CTL_CPU_VARS_SPEED(cpunr), \
{ .ctl_name = 0, }, }
/* the ctl_table entry for each CPU */
#define CPU_ENUM(s) { \
.ctl_name = (CPU_NR + s), \
.procname = #s, \
.mode = 0555, \
.child = ctl_cpu_vars_##s }
#endif /* CONFIG_CPU_FREQ_24_API */
#endif /* CONFIG_CPU_FREQ_GOV_USERSPACE */
/*********************************************************************
* FREQUENCY TABLE HELPERS *
......
include/linux/module.h
View file @ 7e285bef
......@@ -150,13 +150,7 @@ void *__symbol_get(const char *symbol);
void *__symbol_get_gpl(const char *symbol);
#define symbol_get(x) ((typeof(&x))(__symbol_get(MODULE_SYMBOL_PREFIX #x)))
#ifdef __GENKSYMS__
/* genksyms doesn't handle GPL-only symbols yet */
#define EXPORT_SYMBOL_GPL EXPORT_SYMBOL
#else
#ifndef __GENKSYMS__
#ifdef CONFIG_MODVERSIONS
/* Mark the CRC weak since genksyms apparently decides not to
* generate a checksums for some symbols */
......@@ -188,7 +182,7 @@ void *__symbol_get_gpl(const char *symbol);
#endif
/* We don't mangle the actual symbol anymore, so no need for
* special casing EXPORT_SYMBOL_NOVERS */
* special casing EXPORT_SYMBOL_NOVERS. FIXME: Deprecated */
#define EXPORT_SYMBOL_NOVERS(sym) EXPORT_SYMBOL(sym)
struct module_ref
......
init/Makefile
View file @ 7e285bef
......@@ -3,6 +3,9 @@
#
obj-y := main.o version.o do_mounts.o initramfs.o
obj-$(CONFIG_DEVFS_FS) += do_mounts_devfs.o
obj-$(CONFIG_BLK_DEV_RAM) += do_mounts_rd.o
obj-$(CONFIG_BLK_DEV_MD) += do_mounts_md.o
# files to be removed upon make clean
clean-files := ../include/linux/compile.h
......@@ -17,5 +20,5 @@ $(obj)/version.o: include/linux/compile.h
# actual file if its content has changed.
include/linux/compile.h: FORCE
@echo -n ' Generating $@'
@echo -n ' GEN $@'
@sh $(srctree)/scripts/mkcompile_h $@ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CC) $(CFLAGS)"
init/do_mounts.c
View file @ 7e285bef
#define __KERNEL_SYSCALLS__
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/unistd.h>
#include <linux/ctype.h>
#include <linux/blk.h>
#include <linux/fd.h>
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/root_dev.h>
#include <linux/mount.h>
#include <linux/dirent.h>
#include <linux/security.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_fs_sb.h>
#include <linux/nfs_mount.h>
#include <linux/minix_fs.h>
#include <linux/ext2_fs.h>
#include <linux/romfs_fs.h>
#include <linux/raid/md.h>
#define BUILD_CRAMDISK
#include "do_mounts.h"
extern int get_filesystem_list(char * buf);
extern asmlinkage long sys_mount(char *dev_name, char *dir_name, char *type,
unsigned long flags, void *data);
extern asmlinkage long sys_mkdir(const char *name, int mode);
extern asmlinkage long sys_rmdir(const char *name);
extern asmlinkage long sys_chdir(const char *name);
extern asmlinkage long sys_fchdir(int fd);
extern asmlinkage long sys_chroot(const char *name);
extern asmlinkage long sys_unlink(const char *name);
extern asmlinkage long sys_symlink(const char *old, const char *new);
extern asmlinkage long sys_mknod(const char *name, int mode, dev_t dev);
extern asmlinkage long sys_umount(char *name, int flags);
extern asmlinkage long sys_ioctl(int fd, int cmd, unsigned long arg);
extern asmlinkage long sys_access(const char * filename, int mode);
extern asmlinkage long sys_newstat(char * filename, struct stat * statbuf);
extern asmlinkage long sys_getdents64(unsigned int fd, void * dirent,
unsigned int count);
#ifdef CONFIG_BLK_DEV_INITRD
unsigned int real_root_dev; /* do_proc_dointvec cannot handle kdev_t */
static int __initdata mount_initrd = 1;
static int __init no_initrd(char *str)
{
mount_initrd = 0;
return 1;
}
__setup("noinitrd", no_initrd);
#else
static int __initdata mount_initrd = 0;
#endif
int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */
int root_mountflags = MS_RDONLY | MS_VERBOSE;
static char root_device_name[64];
static char saved_root_name[64];
static char * __initdata root_device_name;
static char __initdata saved_root_name[64];
/* this is initialized in init/main.c */
dev_t ROOT_DEV;
static int do_devfs = 0;
static int __init load_ramdisk(char *str)
{
rd_doload = simple_strtol(str,NULL,0) & 3;
......@@ -98,7 +49,7 @@ static int __init readwrite(char *str)
__setup("ro", readonly);
__setup("rw", readwrite);
static __init dev_t try_name(char *name, int part)
static dev_t __init try_name(char *name, int part)
{
char path[64];
char buf[32];
......@@ -167,7 +118,7 @@ static __init dev_t try_name(char *name, int part)
* is mounted on rootfs /sys.
*/
__init dev_t name_to_dev_t(char *name)
dev_t name_to_dev_t(char *name)
{
char s[32];
char *p;
......@@ -225,8 +176,7 @@ __init dev_t name_to_dev_t(char *name)
static int __init root_dev_setup(char *line)
{
strncpy(saved_root_name, line, 64);
saved_root_name[63] = '\0';
strncpy(saved_root_name, line, 63);
return 1;
}
......@@ -275,7 +225,23 @@ static void __init get_fs_names(char *page)
}
*s = '\0';
}
static void __init mount_block_root(char *name, int flags)
static int __init do_mount_root(char *name, char *fs, int flags, void *data)
{
int err = sys_mount(name, "/root", fs, flags, data);
if (err)
return err;
sys_chdir("/root");
ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
printk("VFS: Mounted root (%s filesystem)%s.\n",
current->fs->pwdmnt->mnt_sb->s_type->name,
current->fs->pwdmnt->mnt_sb->s_flags & MS_RDONLY ?
" readonly" : "");
return 0;
}
void __init mount_block_root(char *name, int flags)
{
char *fs_names = __getname();
char *p;
......@@ -283,7 +249,7 @@ static void __init mount_block_root(char *name, int flags)
get_fs_names(fs_names);
retry:
for (p = fs_names; *p; p += strlen(p)+1) {
int err = sys_mount(name, "/root", p, flags, root_mount_data);
int err = do_mount_root(name, p, flags, root_mount_data);
switch (err) {
case 0:
goto out;
......@@ -305,11 +271,6 @@ static void __init mount_block_root(char *name, int flags)
panic("VFS: Unable to mount root fs on %s", __bdevname(ROOT_DEV));
out:
putname(fs_names);
sys_chdir("/root");
ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
printk("VFS: Mounted root (%s filesystem)%s.\n",
current->fs->pwdmnt->mnt_sb->s_type->name,
(current->fs->pwdmnt->mnt_sb->s_flags & MS_RDONLY) ? " readonly" : "");
}
#ifdef CONFIG_ROOT_NFS
......@@ -317,139 +278,16 @@ static int __init mount_nfs_root(void)
{
void *data = nfs_root_data();
if (data && sys_mount("/dev/root","/root","nfs",root_mountflags,data) == 0)
create_dev("/dev/root", ROOT_DEV, NULL);
if (data &&
do_mount_root("/dev/root", "nfs", root_mountflags, data) == 0)
return 1;
return 0;
}
#endif
#ifdef CONFIG_DEVFS_FS
/*
* If the dir will fit in *buf, return its length. If it won't fit, return
* zero. Return -ve on error.
*/
static int __init do_read_dir(int fd, void *buf, int len)
{
long bytes, n;
char *p = buf;
lseek(fd, 0, 0);
for (bytes = 0; bytes < len; bytes += n) {
n = sys_getdents64(fd, p + bytes, len - bytes);
if (n < 0)
return n;
if (n == 0)
return bytes;
}
return 0;
}
/*
* Try to read all of a directory. Returns the contents at *p, which
* is kmalloced memory. Returns the number of bytes read at *len. Returns
* NULL on error.
*/
static void * __init read_dir(char *path, int *len)
{
int size;
int fd = open(path, 0, 0);
*len = 0;
if (fd < 0)
return NULL;
for (size = 1 << 9; size <= (1 << MAX_ORDER); size <<= 1) {
void *p = kmalloc(size, GFP_KERNEL);
int n;
if (!p)
break;
n = do_read_dir(fd, p, size);
if (n > 0) {
close(fd);
*len = n;
return p;
}
kfree(p);
if (n == -EINVAL)
continue; /* Try a larger buffer */
if (n < 0)
break;
}
close(fd);
return NULL;
}
#endif
static int __init find_in_devfs(char *path, dev_t dev)
{
#ifdef CONFIG_DEVFS_FS
struct stat buf;
char *end = path + strlen(path);
int rest = path + 64 - end;
int size;
char *p = read_dir(path, &size);
char *s;
if (!p)
return -1;
for (s = p; s < p + size; s += ((struct linux_dirent64 *)s)->d_reclen) {
struct linux_dirent64 *d = (struct linux_dirent64 *)s;
if (strlen(d->d_name) + 2 > rest)
continue;
switch (d->d_type) {
case DT_BLK:
sprintf(end, "/%s", d->d_name);
if (sys_newstat(path, &buf) < 0)
break;
if (!S_ISBLK(buf.st_mode))
break;
if (buf.st_rdev != dev)
break;
kfree(p);
return 0;
case DT_DIR:
if (strcmp(d->d_name, ".") == 0)
break;
if (strcmp(d->d_name, "..") == 0)
break;
sprintf(end, "/%s", d->d_name);
if (find_in_devfs(path, dev) < 0)
break;
kfree(p);
return 0;
}
}
kfree(p);
#endif
return -1;
}
static int __init create_dev(char *name, dev_t dev, char *devfs_name)
{
char path[64];
sys_unlink(name);
if (!do_devfs)
return sys_mknod(name, S_IFBLK|0600, dev);
if (devfs_name && devfs_name[0]) {
if (strncmp(devfs_name, "/dev/", 5) == 0)
devfs_name += 5;
sprintf(path, "/dev/%s", devfs_name);
if (sys_access(path, 0) == 0)
return sys_symlink(devfs_name, name);
}
if (!dev)
return -1;
strcpy(path, "/dev");
if (find_in_devfs(path, dev) < 0)
return -1;
return sys_symlink(path + 5, name);
}
#if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD)
static void __init change_floppy(char *fmt, ...)
void __init change_floppy(char *fmt, ...)
{
struct termios termios;
char buf[80];
......@@ -478,838 +316,69 @@ static void __init change_floppy(char *fmt, ...)
}
#endif
#ifdef CONFIG_BLK_DEV_RAM
int __initdata rd_prompt = 1; /* 1 = prompt for RAM disk, 0 = don't prompt */
static int __init prompt_ramdisk(char *str)
{
rd_prompt = simple_strtol(str,NULL,0) & 1;
return 1;
}
__setup("prompt_ramdisk=", prompt_ramdisk);
int __initdata rd_image_start; /* starting block # of image */
static int __init ramdisk_start_setup(char *str)
{
rd_image_start = simple_strtol(str,NULL,0);
return 1;
}
__setup("ramdisk_start=", ramdisk_start_setup);
static int __init crd_load(int in_fd, int out_fd);
/*
* This routine tries to find a RAM disk image to load, and returns the
* number of blocks to read for a non-compressed image, 0 if the image
* is a compressed image, and -1 if an image with the right magic
* numbers could not be found.
*
* We currently check for the following magic numbers:
* minix
* ext2
* romfs
* gzip
*/
static int __init
identify_ramdisk_image(int fd, int start_block)
{
const int size = 512;
struct minix_super_block *minixsb;
struct ext2_super_block *ext2sb;
struct romfs_super_block *romfsb;
int nblocks = -1;
unsigned char *buf;
buf = kmalloc(size, GFP_KERNEL);
if (buf == 0)
return -1;
minixsb = (struct minix_super_block *) buf;
ext2sb = (struct ext2_super_block *) buf;
romfsb = (struct romfs_super_block *) buf;
memset(buf, 0xe5, size);
/*
* Read block 0 to test for gzipped kernel
*/
lseek(fd, start_block * BLOCK_SIZE, 0);
read(fd, buf, size);
/*
* If it matches the gzip magic numbers, return -1
*/
if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) {
printk(KERN_NOTICE
"RAMDISK: Compressed image found at block %d\n",
start_block);
nblocks = 0;
goto done;
}
/* romfs is at block zero too */
if (romfsb->word0 == ROMSB_WORD0 &&
romfsb->word1 == ROMSB_WORD1) {
printk(KERN_NOTICE
"RAMDISK: romfs filesystem found at block %d\n",
start_block);
nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
goto done;
}
/*
* Read block 1 to test for minix and ext2 superblock
*/
lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
read(fd, buf, size);
/* Try minix */
if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
minixsb->s_magic == MINIX_SUPER_MAGIC2) {
printk(KERN_NOTICE
"RAMDISK: Minix filesystem found at block %d\n",
start_block);
nblocks = minixsb->s_nzones << minixsb->s_log_zone_size;
goto done;
}
/* Try ext2 */
if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) {
printk(KERN_NOTICE
"RAMDISK: ext2 filesystem found at block %d\n",
start_block);
nblocks = le32_to_cpu(ext2sb->s_blocks_count);
goto done;
}
printk(KERN_NOTICE
"RAMDISK: Couldn't find valid RAM disk image starting at %d.\n",
start_block);
done:
lseek(fd, start_block * BLOCK_SIZE, 0);
kfree(buf);
return nblocks;
}
#endif
static int __init rd_load_image(char *from)
{
int res = 0;
#ifdef CONFIG_BLK_DEV_RAM
int in_fd, out_fd;
unsigned long rd_blocks, devblocks;
int nblocks, i, disk;
char *buf;
unsigned short rotate = 0;
#if !defined(CONFIG_ARCH_S390) && !defined(CONFIG_PPC_ISERIES)
char rotator[4] = { '|' , '/' , '-' , '\\' };
#endif
out_fd = open("/dev/ram", O_RDWR, 0);
if (out_fd < 0)
goto out;
in_fd = open(from, O_RDONLY, 0);
if (in_fd < 0)
goto noclose_input;
nblocks = identify_ramdisk_image(in_fd, rd_image_start);
if (nblocks < 0)
goto done;
if (nblocks == 0) {
#ifdef BUILD_CRAMDISK
if (crd_load(in_fd, out_fd) == 0)
goto successful_load;
#else
printk(KERN_NOTICE
"RAMDISK: Kernel does not support compressed "
"RAM disk images\n");
#endif
goto done;
}
/*
* NOTE NOTE: nblocks suppose that the blocksize is BLOCK_SIZE, so
* rd_load_image will work only with filesystem BLOCK_SIZE wide!
* So make sure to use 1k blocksize while generating ext2fs
* ramdisk-images.
*/
if (sys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0)
rd_blocks = 0;
else
rd_blocks >>= 1;
if (nblocks > rd_blocks) {
printk("RAMDISK: image too big! (%d/%ld blocks)\n",
nblocks, rd_blocks);
goto done;
}
/*
* OK, time to copy in the data
*/
if (sys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0)
devblocks = 0;
else
devblocks >>= 1;
if (strcmp(from, "/dev/initrd") == 0)
devblocks = nblocks;
if (devblocks == 0) {
printk(KERN_ERR "RAMDISK: could not determine device size\n");
goto done;
}
buf = kmalloc(BLOCK_SIZE, GFP_KERNEL);
if (buf == 0) {
printk(KERN_ERR "RAMDISK: could not allocate buffer\n");
goto done;
}
printk(KERN_NOTICE "RAMDISK: Loading %d blocks [%ld disk%s] into ram disk... ",
nblocks, ((nblocks-1)/devblocks)+1, nblocks>devblocks ? "s" : "");
for (i = 0, disk = 1; i < nblocks; i++) {
if (i && (i % devblocks == 0)) {
printk("done disk #%d.\n", disk++);
rotate = 0;
if (close(in_fd)) {
printk("Error closing the disk.\n");
goto noclose_input;
}
change_floppy("disk #%d", disk);
in_fd = open(from, O_RDONLY, 0);
if (in_fd < 0) {
printk("Error opening disk.\n");
goto noclose_input;
}
printk("Loading disk #%d... ", disk);
}
read(in_fd, buf, BLOCK_SIZE);
write(out_fd, buf, BLOCK_SIZE);
#if !defined(CONFIG_ARCH_S390) && !defined(CONFIG_PPC_ISERIES)
if (!(i % 16)) {
printk("%c\b", rotator[rotate & 0x3]);
rotate++;
}
#endif
}
printk("done.\n");
kfree(buf);
successful_load:
res = 1;
done:
close(in_fd);
noclose_input:
close(out_fd);
out:
sys_unlink("/dev/ram");
#endif
return res;
}
static int __init rd_load_disk(int n)
{
#ifdef CONFIG_BLK_DEV_RAM
if (rd_prompt)
change_floppy("root floppy disk to be loaded into RAM disk");
create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, n), NULL);
#endif
return rd_load_image("/dev/root");
}
static void __init mount_root(void)
void __init mount_root(void)
{
#ifdef CONFIG_ROOT_NFS
if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) {
if (mount_nfs_root()) {
sys_chdir("/root");
ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
printk("VFS: Mounted root (nfs filesystem).\n");
if (mount_nfs_root())
return;
}
printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
ROOT_DEV = Root_FD0;
}
#endif
create_dev("/dev/root", ROOT_DEV, root_device_name);
#ifdef CONFIG_BLK_DEV_FD
if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) {
/* rd_doload is 2 for a dual initrd/ramload setup */
if (rd_doload==2) {
if (rd_load_disk(1)) {
ROOT_DEV = Root_RAM1;
create_dev("/dev/root", ROOT_DEV, NULL);
root_device_name = NULL;
}
} else
change_floppy("root floppy");
}
#endif
create_dev("/dev/root", ROOT_DEV, root_device_name);
mount_block_root("/dev/root", root_mountflags);
}
#ifdef CONFIG_BLK_DEV_INITRD
static int old_fd, root_fd;
static int do_linuxrc(void * shell)
{
static char *argv[] = { "linuxrc", NULL, };
extern char * envp_init[];
close(old_fd);close(root_fd);
close(0);close(1);close(2);
setsid();
(void) open("/dev/console",O_RDWR,0);
(void) dup(0);
(void) dup(0);
return execve(shell, argv, envp_init);
}
#endif
static void __init handle_initrd(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
int error;
int i, pid;
create_dev("/dev/root.old", Root_RAM0, NULL);
/* mount initrd on rootfs' /root */
mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
sys_mkdir("/old", 0700);
root_fd = open("/", 0, 0);
old_fd = open("/old", 0, 0);
/* move initrd over / and chdir/chroot in initrd root */
sys_chdir("/root");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
mount_devfs_fs ();
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0) {
while (pid != waitpid(-1, &i, 0))
yield();
}
/* move initrd to rootfs' /old */
sys_fchdir(old_fd);
sys_mount("/", ".", NULL, MS_MOVE, NULL);
/* switch root and cwd back to / of rootfs */
sys_fchdir(root_fd);
sys_chroot(".");
close(old_fd);
close(root_fd);
sys_umount("/old/dev", 0);
if (real_root_dev == Root_RAM0) {
sys_chdir("/old");
return;
}
ROOT_DEV = real_root_dev;
mount_root();
printk(KERN_NOTICE "Trying to move old root to /initrd ... ");
error = sys_mount("/old", "/root/initrd", NULL, MS_MOVE, NULL);
if (!error)
printk("okay\n");
else {
int fd = open("/dev/root.old", O_RDWR, 0);
printk("failed\n");
printk(KERN_NOTICE "Unmounting old root\n");
sys_umount("/old", MNT_DETACH);
printk(KERN_NOTICE "Trying to free ramdisk memory ... ");
if (fd < 0) {
error = fd;
} else {
error = sys_ioctl(fd, BLKFLSBUF, 0);
close(fd);
}
printk(!error ? "okay\n" : "failed\n");
}
#endif
}
static int __init initrd_load(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, 0), NULL);
create_dev("/dev/initrd", MKDEV(RAMDISK_MAJOR, INITRD_MINOR), NULL);
#endif
return rd_load_image("/dev/initrd");
}
static void __init md_run_setup(void);
/*
* Prepare the namespace - decide what/where to mount, load ramdisks, etc.
*/
void prepare_namespace(void)
void __init prepare_namespace(void)
{
int is_floppy;
#ifdef CONFIG_DEVFS_FS
sys_mount("devfs", "/dev", "devfs", 0, NULL);
do_devfs = 1;
#endif
mount_devfs();
md_run_setup();
if (saved_root_name[0]) {
char *p = saved_root_name;
ROOT_DEV = name_to_dev_t(p);
if (strncmp(p, "/dev/", 5) == 0)
p += 5;
strcpy(root_device_name, p);
root_device_name = saved_root_name;
ROOT_DEV = name_to_dev_t(root_device_name);
if (strncmp(root_device_name, "/dev/", 5) == 0)
root_device_name += 5;
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
#ifdef CONFIG_BLK_DEV_INITRD
if (!initrd_start)
mount_initrd = 0;
real_root_dev = ROOT_DEV;
#endif
create_dev("/dev/root", ROOT_DEV, NULL);
/* This has to be before mounting root, because even readonly mount of reiserfs would replay
log corrupting stuff */
software_resume();
if (mount_initrd) {
if (initrd_load() && ROOT_DEV != Root_RAM0) {
handle_initrd();
goto out;
}
} else if (is_floppy && rd_doload && rd_load_disk(0))
if (initrd_load())
goto out;
if (is_floppy && rd_doload && rd_load_disk(0))
ROOT_DEV = Root_RAM0;
mount_root();
out:
sys_umount("/dev", 0);
umount_devfs("/dev");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
security_sb_post_mountroot();
mount_devfs_fs ();
}
#if defined(BUILD_CRAMDISK) && defined(CONFIG_BLK_DEV_RAM)
/*
* gzip declarations
*/
#define OF(args) args
#ifndef memzero
#define memzero(s, n) memset ((s), 0, (n))
#endif
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define INBUFSIZ 4096
#define WSIZE 0x8000 /* window size--must be a power of two, and */
/* at least 32K for zip's deflate method */
static uch *inbuf;
static uch *window;
static unsigned insize; /* valid bytes in inbuf */
static unsigned inptr; /* index of next byte to be processed in inbuf */
static unsigned outcnt; /* bytes in output buffer */
static int exit_code;
static int unzip_error;
static long bytes_out;
static int crd_infd, crd_outfd;
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
/* Diagnostic functions (stubbed out) */
#define Assert(cond,msg)
#define Trace(x)
#define Tracev(x)
#define Tracevv(x)
#define Tracec(c,x)
#define Tracecv(c,x)
#define STATIC static
static int fill_inbuf(void);
static void flush_window(void);
static void *malloc(int size);
static void free(void *where);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
#include "../lib/inflate.c"
static void __init *malloc(int size)
{
return kmalloc(size, GFP_KERNEL);
}
static void __init free(void *where)
{
kfree(where);
}
static void __init gzip_mark(void **ptr)
{
}
static void __init gzip_release(void **ptr)
{
}
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
* Returning -1 does not guarantee that gunzip() will ever return.
*/
static int __init fill_inbuf(void)
{
if (exit_code) return -1;
insize = read(crd_infd, inbuf, INBUFSIZ);
if (insize == 0) {
error("RAMDISK: ran out of compressed data\n");
return -1;
}
inptr = 1;
return inbuf[0];
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
static void __init flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n, written;
uch *in, ch;
written = write(crd_outfd, window, outcnt);
if (written != outcnt && unzip_error == 0) {
printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n",
written, outcnt, bytes_out);
unzip_error = 1;
}
in = window;
for (n = 0; n < outcnt; n++) {
ch = *in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
outcnt = 0;
}
static void __init error(char *x)
{
printk(KERN_ERR "%s", x);
exit_code = 1;
unzip_error = 1;
}
static int __init crd_load(int in_fd, int out_fd)
{
int result;
insize = 0; /* valid bytes in inbuf */
inptr = 0; /* index of next byte to be processed in inbuf */
outcnt = 0; /* bytes in output buffer */
exit_code = 0;
bytes_out = 0;
crc = (ulg)0xffffffffL; /* shift register contents */
crd_infd = in_fd;
crd_outfd = out_fd;
inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
if (inbuf == 0) {
printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
return -1;
}
window = kmalloc(WSIZE, GFP_KERNEL);
if (window == 0) {
printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
kfree(inbuf);
return -1;
}
makecrc();
result = gunzip();
if (unzip_error)
result = 1;
kfree(inbuf);
kfree(window);
return result;
}
#endif /* BUILD_CRAMDISK && CONFIG_BLK_DEV_RAM */
#ifdef CONFIG_BLK_DEV_MD
/*
* When md (and any require personalities) are compiled into the kernel
* (not a module), arrays can be assembles are boot time using with AUTODETECT
* where specially marked partitions are registered with md_autodetect_dev(),
* and with MD_BOOT where devices to be collected are given on the boot line
* with md=.....
* The code for that is here.
*/
struct {
int set;
int noautodetect;
} raid_setup_args __initdata;
static struct {
char device_set [MAX_MD_DEVS];
int pers[MAX_MD_DEVS];
int chunk[MAX_MD_DEVS];
char *device_names[MAX_MD_DEVS];
} md_setup_args __initdata;
/*
* Parse the command-line parameters given our kernel, but do not
* actually try to invoke the MD device now; that is handled by
* md_setup_drive after the low-level disk drivers have initialised.
*
* 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
* assigns the task of parsing integer arguments to the
* invoked program now). Added ability to initialise all
* the MD devices (by specifying multiple "md=" lines)
* instead of just one. -- KTK
* 18May2000: Added support for persistent-superblock arrays:
* md=n,0,factor,fault,device-list uses RAID0 for device n
* md=n,-1,factor,fault,device-list uses LINEAR for device n
* md=n,device-list reads a RAID superblock from the devices
* elements in device-list are read by name_to_kdev_t so can be
* a hex number or something like /dev/hda1 /dev/sdb
* 2001-06-03: Dave Cinege <dcinege@psychosis.com>
* Shifted name_to_kdev_t() and related operations to md_set_drive()
* for later execution. Rewrote section to make devfs compatible.
*/
static int __init md_setup(char *str)
{
int minor, level, factor, fault, pers;
char *pername = "";
char *str1 = str;
if (get_option(&str, &minor) != 2) { /* MD Number */
printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
return 0;
}
if (minor >= MAX_MD_DEVS) {
printk(KERN_WARNING "md: md=%d, Minor device number too high.\n", minor);
return 0;
} else if (md_setup_args.device_names[minor]) {
printk(KERN_WARNING "md: md=%d, Specified more than once. "
"Replacing previous definition.\n", minor);
}
switch (get_option(&str, &level)) { /* RAID Personality */
case 2: /* could be 0 or -1.. */
if (level == 0 || level == LEVEL_LINEAR) {
if (get_option(&str, &factor) != 2 || /* Chunk Size */
get_option(&str, &fault) != 2) {
printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
return 0;
}
md_setup_args.pers[minor] = level;
md_setup_args.chunk[minor] = 1 << (factor+12);
switch(level) {
case LEVEL_LINEAR:
pers = LINEAR;
pername = "linear";
break;
case 0:
pers = RAID0;
pername = "raid0";
break;
default:
printk(KERN_WARNING
"md: The kernel has not been configured for raid%d support!\n",
level);
return 0;
}
md_setup_args.pers[minor] = pers;
break;
}
/* FALL THROUGH */
case 1: /* the first device is numeric */
str = str1;
/* FALL THROUGH */
case 0:
md_setup_args.pers[minor] = 0;
pername="super-block";
}
printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
minor, pername, str);
md_setup_args.device_names[minor] = str;
return 1;
}
static void __init md_setup_drive(void)
{
int minor, i;
dev_t dev;
dev_t devices[MD_SB_DISKS+1];
for (minor = 0; minor < MAX_MD_DEVS; minor++) {
int fd;
int err = 0;
char *devname;
mdu_disk_info_t dinfo;
char name[16], devfs_name[16];
if (!(devname = md_setup_args.device_names[minor]))
continue;
sprintf(name, "/dev/md%d", minor);
sprintf(devfs_name, "/dev/md/%d", minor);
create_dev(name, MKDEV(MD_MAJOR, minor), devfs_name);
for (i = 0; i < MD_SB_DISKS && devname != 0; i++) {
char *p;
char comp_name[64];
struct stat buf;
p = strchr(devname, ',');
if (p)
*p++ = 0;
dev = name_to_dev_t(devname);
if (strncmp(devname, "/dev/", 5))
devname += 5;
snprintf(comp_name, 63, "/dev/%s", devname);
if (sys_newstat(comp_name, &buf) == 0 &&
S_ISBLK(buf.st_mode))
dev = buf.st_rdev;
if (!dev) {
printk(KERN_WARNING "md: Unknown device name: %s\n", devname);
break;
}
devices[i] = dev;
md_setup_args.device_set[minor] = 1;
devname = p;
}
devices[i] = 0;
if (!md_setup_args.device_set[minor])
continue;
printk(KERN_INFO "md: Loading md%d: %s\n", minor, md_setup_args.device_names[minor]);
fd = open(name, 0, 0);
if (fd < 0) {
printk(KERN_ERR "md: open failed - cannot start array %d\n", minor);
continue;
}
if (sys_ioctl(fd, SET_ARRAY_INFO, 0) == -EBUSY) {
printk(KERN_WARNING
"md: Ignoring md=%d, already autodetected. (Use raid=noautodetect)\n",
minor);
close(fd);
continue;
}
if (md_setup_args.pers[minor]) {
/* non-persistent */
mdu_array_info_t ainfo;
ainfo.level = pers_to_level(md_setup_args.pers[minor]);
ainfo.size = 0;
ainfo.nr_disks =0;
ainfo.raid_disks =0;
while (devices[ainfo.raid_disks])
ainfo.raid_disks++;
ainfo.md_minor =minor;
ainfo.not_persistent = 1;
ainfo.state = (1 << MD_SB_CLEAN);
ainfo.layout = 0;
ainfo.chunk_size = md_setup_args.chunk[minor];
err = sys_ioctl(fd, SET_ARRAY_INFO, (long)&ainfo);
for (i = 0; !err && i <= MD_SB_DISKS; i++) {
dev = devices[i];
if (!dev)
break;
dinfo.number = i;
dinfo.raid_disk = i;
dinfo.state = (1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC);
dinfo.major = MAJOR(dev);
dinfo.minor = MINOR(dev);
err = sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
}
} else {
/* persistent */
for (i = 0; i <= MD_SB_DISKS; i++) {
dev = devices[i];
if (!dev)
break;
dinfo.major = MAJOR(dev);
dinfo.minor = MINOR(dev);
sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
}
}
if (!err)
err = sys_ioctl(fd, RUN_ARRAY, 0);
if (err)
printk(KERN_WARNING "md: starting md%d failed\n", minor);
close(fd);
}
}
static int __init raid_setup(char *str)
{
int len, pos;
len = strlen(str) + 1;
pos = 0;
while (pos < len) {
char *comma = strchr(str+pos, ',');
int wlen;
if (comma)
wlen = (comma-str)-pos;
else wlen = (len-1)-pos;
if (!strncmp(str, "noautodetect", wlen))
raid_setup_args.noautodetect = 1;
pos += wlen+1;
}
raid_setup_args.set = 1;
return 1;
}
__setup("raid=", raid_setup);
__setup("md=", md_setup);
#endif
static void __init md_run_setup(void)
{
#ifdef CONFIG_BLK_DEV_MD
create_dev("/dev/md0", MKDEV(MD_MAJOR, 0), "md/0");
if (raid_setup_args.noautodetect)
printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n");
else {
int fd = open("/dev/md0", 0, 0);
if (fd >= 0) {
sys_ioctl(fd, RAID_AUTORUN, 0);
close(fd);
}
}
md_setup_drive();
#endif
}
init/do_mounts.h 0 → 100644
View file @ 7e285bef
#define __KERNEL_SYSCALLS__
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/init.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/blk.h>
#include <linux/root_dev.h>
asmlinkage long sys_unlink(const char *name);
asmlinkage long sys_mknod(const char *name, int mode, dev_t dev);
asmlinkage long sys_newstat(char * filename, struct stat * statbuf);
asmlinkage long sys_ioctl(int fd, int cmd, unsigned long arg);
asmlinkage long sys_mkdir(const char *name, int mode);
asmlinkage long sys_rmdir(const char *name);
asmlinkage long sys_chdir(const char *name);
asmlinkage long sys_fchdir(int fd);
asmlinkage long sys_chroot(const char *name);
asmlinkage long sys_mount(char *dev_name, char *dir_name, char *type,
unsigned long flags, void *data);
asmlinkage long sys_umount(char *name, int flags);
dev_t name_to_dev_t(char *name);
void change_floppy(char *fmt, ...);
void mount_block_root(char *name, int flags);
void mount_root(void);
extern int root_mountflags;
#ifdef CONFIG_DEVFS_FS
void mount_devfs(void);
void umount_devfs(char *path);
int create_dev(char *name, dev_t dev, char *devfs_name);
#else
static inline void mount_devfs(void) {}
static inline void umount_devfs(const char *path) {}
static inline int create_dev(char *name, dev_t dev, char *devfs_name)
{
sys_unlink(name);
return sys_mknod(name, S_IFBLK|0600, dev);
}
#endif
#ifdef CONFIG_BLK_DEV_RAM
int __init rd_load_disk(int n);
int __init rd_load_image(char *from);
#else
static inline int rd_load_disk(int n) { return 0; }
static inline int rd_load_image(char *from) { return 0; }
#endif
#ifdef CONFIG_BLK_DEV_INITRD
int __init initrd_load(void);
#else
static inline int initrd_load(void) { return 0; }
#endif
#ifdef CONFIG_BLK_DEV_MD
void md_run_setup(void);
#else
static inline void md_run_setup(void) {}
#endif
init/do_mounts_devfs.c 0 → 100644
View file @ 7e285bef
#include <linux/kernel.h>
#include <linux/dirent.h>
#include <linux/string.h>
#include "do_mounts.h"
extern asmlinkage long sys_symlink(const char *old, const char *new);
extern asmlinkage long sys_access(const char * filename, int mode);
extern asmlinkage long sys_getdents64(unsigned int fd, void * dirent,
unsigned int count);
void __init mount_devfs(void)
{
sys_mount("devfs", "/dev", "devfs", 0, NULL);
}
void __init umount_devfs(char *path)
{
sys_umount(path, 0);
}
/*
* If the dir will fit in *buf, return its length. If it won't fit, return
* zero. Return -ve on error.
*/
static int __init do_read_dir(int fd, void *buf, int len)
{
long bytes, n;
char *p = buf;
lseek(fd, 0, 0);
for (bytes = 0; bytes < len; bytes += n) {
n = sys_getdents64(fd, p + bytes, len - bytes);
if (n < 0)
return n;
if (n == 0)
return bytes;
}
return 0;
}
/*
* Try to read all of a directory. Returns the contents at *p, which
* is kmalloced memory. Returns the number of bytes read at *len. Returns
* NULL on error.
*/
static void * __init read_dir(char *path, int *len)
{
int size;
int fd = open(path, 0, 0);
*len = 0;
if (fd < 0)
return NULL;
for (size = 1 << 9; size <= (1 << MAX_ORDER); size <<= 1) {
void *p = kmalloc(size, GFP_KERNEL);
int n;
if (!p)
break;
n = do_read_dir(fd, p, size);
if (n > 0) {
close(fd);
*len = n;
return p;
}
kfree(p);
if (n == -EINVAL)
continue; /* Try a larger buffer */
if (n < 0)
break;
}
close(fd);
return NULL;
}
/*
* recursively scan <path>, looking for a device node of type <dev>
*/
static int __init find_in_devfs(char *path, dev_t dev)
{
struct stat buf;
char *end = path + strlen(path);
int rest = path + 64 - end;
int size;
char *p = read_dir(path, &size);
char *s;
if (!p)
return -1;
for (s = p; s < p + size; s += ((struct linux_dirent64 *)s)->d_reclen) {
struct linux_dirent64 *d = (struct linux_dirent64 *)s;
if (strlen(d->d_name) + 2 > rest)
continue;
switch (d->d_type) {
case DT_BLK:
sprintf(end, "/%s", d->d_name);
if (sys_newstat(path, &buf) < 0)
break;
if (!S_ISBLK(buf.st_mode))
break;
if (buf.st_rdev != dev)
break;
kfree(p);
return 0;
case DT_DIR:
if (strcmp(d->d_name, ".") == 0)
break;
if (strcmp(d->d_name, "..") == 0)
break;
sprintf(end, "/%s", d->d_name);
if (find_in_devfs(path, dev) < 0)
break;
kfree(p);
return 0;
}
}
kfree(p);
return -1;
}
/*
* create a device node called <name> which points to
* <devfs_name> if possible, otherwise find a device node
* which matches <dev> and make <name> a symlink pointing to it.
*/
int __init create_dev(char *name, dev_t dev, char *devfs_name)
{
char path[64];
sys_unlink(name);
if (devfs_name && devfs_name[0]) {
if (strncmp(devfs_name, "/dev/", 5) == 0)
devfs_name += 5;
sprintf(path, "/dev/%s", devfs_name);
if (sys_access(path, 0) == 0)
return sys_symlink(devfs_name, name);
}
if (!dev)
return -1;
strcpy(path, "/dev");
if (find_in_devfs(path, dev) < 0)
return -1;
return sys_symlink(path + 5, name);
}
init/do_mounts_md.c 0 → 100644
View file @ 7e285bef
#include <linux/raid/md.h>
#include "do_mounts.h"
/*
* When md (and any require personalities) are compiled into the kernel
* (not a module), arrays can be assembles are boot time using with AUTODETECT
* where specially marked partitions are registered with md_autodetect_dev(),
* and with MD_BOOT where devices to be collected are given on the boot line
* with md=.....
* The code for that is here.
*/
static int __initdata raid_noautodetect;
static struct {
char device_set [MAX_MD_DEVS];
int pers[MAX_MD_DEVS];
int chunk[MAX_MD_DEVS];
char *device_names[MAX_MD_DEVS];
} md_setup_args __initdata;
/*
* Parse the command-line parameters given our kernel, but do not
* actually try to invoke the MD device now; that is handled by
* md_setup_drive after the low-level disk drivers have initialised.
*
* 27/11/1999: Fixed to work correctly with the 2.3 kernel (which
* assigns the task of parsing integer arguments to the
* invoked program now). Added ability to initialise all
* the MD devices (by specifying multiple "md=" lines)
* instead of just one. -- KTK
* 18May2000: Added support for persistent-superblock arrays:
* md=n,0,factor,fault,device-list uses RAID0 for device n
* md=n,-1,factor,fault,device-list uses LINEAR for device n
* md=n,device-list reads a RAID superblock from the devices
* elements in device-list are read by name_to_kdev_t so can be
* a hex number or something like /dev/hda1 /dev/sdb
* 2001-06-03: Dave Cinege <dcinege@psychosis.com>
* Shifted name_to_kdev_t() and related operations to md_set_drive()
* for later execution. Rewrote section to make devfs compatible.
*/
static int __init md_setup(char *str)
{
int minor, level, factor, fault, pers;
char *pername = "";
char *str1 = str;
if (get_option(&str, &minor) != 2) { /* MD Number */
printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
return 0;
}
if (minor >= MAX_MD_DEVS) {
printk(KERN_WARNING "md: md=%d, Minor device number too high.\n", minor);
return 0;
} else if (md_setup_args.device_names[minor]) {
printk(KERN_WARNING "md: md=%d, Specified more than once. "
"Replacing previous definition.\n", minor);
}
switch (get_option(&str, &level)) { /* RAID Personality */
case 2: /* could be 0 or -1.. */
if (level == 0 || level == LEVEL_LINEAR) {
if (get_option(&str, &factor) != 2 || /* Chunk Size */
get_option(&str, &fault) != 2) {
printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
return 0;
}
md_setup_args.pers[minor] = level;
md_setup_args.chunk[minor] = 1 << (factor+12);
switch(level) {
case LEVEL_LINEAR:
pers = LINEAR;
pername = "linear";
break;
case 0:
pers = RAID0;
pername = "raid0";
break;
default:
printk(KERN_WARNING
"md: The kernel has not been configured for raid%d support!\n",
level);
return 0;
}
md_setup_args.pers[minor] = pers;
break;
}
/* FALL THROUGH */
case 1: /* the first device is numeric */
str = str1;
/* FALL THROUGH */
case 0:
md_setup_args.pers[minor] = 0;
pername="super-block";
}
printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
minor, pername, str);
md_setup_args.device_names[minor] = str;
return 1;
}
static void __init md_setup_drive(void)
{
int minor, i;
dev_t dev;
dev_t devices[MD_SB_DISKS+1];
for (minor = 0; minor < MAX_MD_DEVS; minor++) {
int fd;
int err = 0;
char *devname;
mdu_disk_info_t dinfo;
char name[16], devfs_name[16];
if (!(devname = md_setup_args.device_names[minor]))
continue;
sprintf(name, "/dev/md%d", minor);
sprintf(devfs_name, "/dev/md/%d", minor);
create_dev(name, MKDEV(MD_MAJOR, minor), devfs_name);
for (i = 0; i < MD_SB_DISKS && devname != 0; i++) {
char *p;
char comp_name[64];
struct stat buf;
p = strchr(devname, ',');
if (p)
*p++ = 0;
dev = name_to_dev_t(devname);
if (strncmp(devname, "/dev/", 5) == 0)
devname += 5;
snprintf(comp_name, 63, "/dev/%s", devname);
if (sys_newstat(comp_name, &buf) == 0 &&
S_ISBLK(buf.st_mode))
dev = buf.st_rdev;
if (!dev) {
printk(KERN_WARNING "md: Unknown device name: %s\n", devname);
break;
}
devices[i] = dev;
md_setup_args.device_set[minor] = 1;
devname = p;
}
devices[i] = 0;
if (!md_setup_args.device_set[minor])
continue;
printk(KERN_INFO "md: Loading md%d: %s\n", minor, md_setup_args.device_names[minor]);
fd = open(name, 0, 0);
if (fd < 0) {
printk(KERN_ERR "md: open failed - cannot start array %d\n", minor);
continue;
}
if (sys_ioctl(fd, SET_ARRAY_INFO, 0) == -EBUSY) {
printk(KERN_WARNING
"md: Ignoring md=%d, already autodetected. (Use raid=noautodetect)\n",
minor);
close(fd);
continue;
}
if (md_setup_args.pers[minor]) {
/* non-persistent */
mdu_array_info_t ainfo;
ainfo.level = pers_to_level(md_setup_args.pers[minor]);
ainfo.size = 0;
ainfo.nr_disks =0;
ainfo.raid_disks =0;
while (devices[ainfo.raid_disks])
ainfo.raid_disks++;
ainfo.md_minor =minor;
ainfo.not_persistent = 1;
ainfo.state = (1 << MD_SB_CLEAN);
ainfo.layout = 0;
ainfo.chunk_size = md_setup_args.chunk[minor];
err = sys_ioctl(fd, SET_ARRAY_INFO, (long)&ainfo);
for (i = 0; !err && i <= MD_SB_DISKS; i++) {
dev = devices[i];
if (!dev)
break;
dinfo.number = i;
dinfo.raid_disk = i;
dinfo.state = (1<<MD_DISK_ACTIVE)|(1<<MD_DISK_SYNC);
dinfo.major = MAJOR(dev);
dinfo.minor = MINOR(dev);
err = sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
}
} else {
/* persistent */
for (i = 0; i <= MD_SB_DISKS; i++) {
dev = devices[i];
if (!dev)
break;
dinfo.major = MAJOR(dev);
dinfo.minor = MINOR(dev);
sys_ioctl(fd, ADD_NEW_DISK, (long)&dinfo);
}
}
if (!err)
err = sys_ioctl(fd, RUN_ARRAY, 0);
if (err)
printk(KERN_WARNING "md: starting md%d failed\n", minor);
close(fd);
}
}
static int __init raid_setup(char *str)
{
int len, pos;
len = strlen(str) + 1;
pos = 0;
while (pos < len) {
char *comma = strchr(str+pos, ',');
int wlen;
if (comma)
wlen = (comma-str)-pos;
else wlen = (len-1)-pos;
if (!strncmp(str, "noautodetect", wlen))
raid_noautodetect = 1;
pos += wlen+1;
}
return 1;
}
__setup("raid=", raid_setup);
__setup("md=", md_setup);
void __init md_run_setup(void)
{
create_dev("/dev/md0", MKDEV(MD_MAJOR, 0), "md/0");
if (raid_noautodetect)
printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=noautodetect)\n");
else {
int fd = open("/dev/md0", 0, 0);
if (fd >= 0) {
sys_ioctl(fd, RAID_AUTORUN, 0);
close(fd);
}
}
md_setup_drive();
}
init/do_mounts_rd.c 0 → 100644
View file @ 7e285bef
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/minix_fs.h>
#include <linux/ext2_fs.h>
#include <linux/romfs_fs.h>
#include "do_mounts.h"
#define BUILD_CRAMDISK
int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */
static int __init prompt_ramdisk(char *str)
{
rd_prompt = simple_strtol(str,NULL,0) & 1;
return 1;
}
__setup("prompt_ramdisk=", prompt_ramdisk);
int __initdata rd_image_start; /* starting block # of image */
static int __init ramdisk_start_setup(char *str)
{
rd_image_start = simple_strtol(str,NULL,0);
return 1;
}
__setup("ramdisk_start=", ramdisk_start_setup);
static int __init crd_load(int in_fd, int out_fd);
/*
* This routine tries to find a RAM disk image to load, and returns the
* number of blocks to read for a non-compressed image, 0 if the image
* is a compressed image, and -1 if an image with the right magic
* numbers could not be found.
*
* We currently check for the following magic numbers:
* minix
* ext2
* romfs
* gzip
*/
static int __init
identify_ramdisk_image(int fd, int start_block)
{
const int size = 512;
struct minix_super_block *minixsb;
struct ext2_super_block *ext2sb;
struct romfs_super_block *romfsb;
int nblocks = -1;
unsigned char *buf;
buf = kmalloc(size, GFP_KERNEL);
if (buf == 0)
return -1;
minixsb = (struct minix_super_block *) buf;
ext2sb = (struct ext2_super_block *) buf;
romfsb = (struct romfs_super_block *) buf;
memset(buf, 0xe5, size);
/*
* Read block 0 to test for gzipped kernel
*/
lseek(fd, start_block * BLOCK_SIZE, 0);
read(fd, buf, size);
/*
* If it matches the gzip magic numbers, return -1
*/
if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) {
printk(KERN_NOTICE
"RAMDISK: Compressed image found at block %d\n",
start_block);
nblocks = 0;
goto done;
}
/* romfs is at block zero too */
if (romfsb->word0 == ROMSB_WORD0 &&
romfsb->word1 == ROMSB_WORD1) {
printk(KERN_NOTICE
"RAMDISK: romfs filesystem found at block %d\n",
start_block);
nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
goto done;
}
/*
* Read block 1 to test for minix and ext2 superblock
*/
lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
read(fd, buf, size);
/* Try minix */
if (minixsb->s_magic == MINIX_SUPER_MAGIC ||
minixsb->s_magic == MINIX_SUPER_MAGIC2) {
printk(KERN_NOTICE
"RAMDISK: Minix filesystem found at block %d\n",
start_block);
nblocks = minixsb->s_nzones << minixsb->s_log_zone_size;
goto done;
}
/* Try ext2 */
if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) {
printk(KERN_NOTICE
"RAMDISK: ext2 filesystem found at block %d\n",
start_block);
nblocks = le32_to_cpu(ext2sb->s_blocks_count);
goto done;
}
printk(KERN_NOTICE
"RAMDISK: Couldn't find valid RAM disk image starting at %d.\n",
start_block);
done:
lseek(fd, start_block * BLOCK_SIZE, 0);
kfree(buf);
return nblocks;
}
int __init rd_load_image(char *from)
{
int res = 0;
int in_fd, out_fd;
unsigned long rd_blocks, devblocks;
int nblocks, i, disk;
char *buf;
unsigned short rotate = 0;
#if !defined(CONFIG_ARCH_S390) && !defined(CONFIG_PPC_ISERIES)
char rotator[4] = { '|' , '/' , '-' , '\\' };
#endif
out_fd = open("/dev/ram", O_RDWR, 0);
if (out_fd < 0)
goto out;
in_fd = open(from, O_RDONLY, 0);
if (in_fd < 0)
goto noclose_input;
nblocks = identify_ramdisk_image(in_fd, rd_image_start);
if (nblocks < 0)
goto done;
if (nblocks == 0) {
#ifdef BUILD_CRAMDISK
if (crd_load(in_fd, out_fd) == 0)
goto successful_load;
#else
printk(KERN_NOTICE
"RAMDISK: Kernel does not support compressed "
"RAM disk images\n");
#endif
goto done;
}
/*
* NOTE NOTE: nblocks suppose that the blocksize is BLOCK_SIZE, so
* rd_load_image will work only with filesystem BLOCK_SIZE wide!
* So make sure to use 1k blocksize while generating ext2fs
* ramdisk-images.
*/
if (sys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0)
rd_blocks = 0;
else
rd_blocks >>= 1;
if (nblocks > rd_blocks) {
printk("RAMDISK: image too big! (%d/%ld blocks)\n",
nblocks, rd_blocks);
goto done;
}
/*
* OK, time to copy in the data
*/
if (sys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0)
devblocks = 0;
else
devblocks >>= 1;
if (strcmp(from, "/dev/initrd") == 0)
devblocks = nblocks;
if (devblocks == 0) {
printk(KERN_ERR "RAMDISK: could not determine device size\n");
goto done;
}
buf = kmalloc(BLOCK_SIZE, GFP_KERNEL);
if (buf == 0) {
printk(KERN_ERR "RAMDISK: could not allocate buffer\n");
goto done;
}
printk(KERN_NOTICE "RAMDISK: Loading %d blocks [%ld disk%s] into ram disk... ",
nblocks, ((nblocks-1)/devblocks)+1, nblocks>devblocks ? "s" : "");
for (i = 0, disk = 1; i < nblocks; i++) {
if (i && (i % devblocks == 0)) {
printk("done disk #%d.\n", disk++);
rotate = 0;
if (close(in_fd)) {
printk("Error closing the disk.\n");
goto noclose_input;
}
change_floppy("disk #%d", disk);
in_fd = open(from, O_RDONLY, 0);
if (in_fd < 0) {
printk("Error opening disk.\n");
goto noclose_input;
}
printk("Loading disk #%d... ", disk);
}
read(in_fd, buf, BLOCK_SIZE);
write(out_fd, buf, BLOCK_SIZE);
#if !defined(CONFIG_ARCH_S390) && !defined(CONFIG_PPC_ISERIES)
if (!(i % 16)) {
printk("%c\b", rotator[rotate & 0x3]);
rotate++;
}
#endif
}
printk("done.\n");
kfree(buf);
successful_load:
res = 1;
done:
close(in_fd);
noclose_input:
close(out_fd);
out:
sys_unlink("/dev/ram");
return res;
}
int __init rd_load_disk(int n)
{
if (rd_prompt)
change_floppy("root floppy disk to be loaded into RAM disk");
create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, n), NULL);
return rd_load_image("/dev/root");
}
#ifdef CONFIG_BLK_DEV_INITRD
unsigned int real_root_dev; /* do_proc_dointvec cannot handle kdev_t */
static int __initdata old_fd, root_fd;
static int __initdata mount_initrd = 1;
static int __init no_initrd(char *str)
{
mount_initrd = 0;
return 1;
}
__setup("noinitrd", no_initrd);
static int __init do_linuxrc(void * shell)
{
static char *argv[] = { "linuxrc", NULL, };
extern char * envp_init[];
close(old_fd);close(root_fd);
close(0);close(1);close(2);
setsid();
(void) open("/dev/console",O_RDWR,0);
(void) dup(0);
(void) dup(0);
return execve(shell, argv, envp_init);
}
static void __init handle_initrd(void)
{
int error;
int i, pid;
real_root_dev = ROOT_DEV;
create_dev("/dev/root.old", Root_RAM0, NULL);
/* mount initrd on rootfs' /root */
mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
sys_mkdir("/old", 0700);
root_fd = open("/", 0, 0);
old_fd = open("/old", 0, 0);
/* move initrd over / and chdir/chroot in initrd root */
sys_chdir("/root");
sys_mount(".", "/", NULL, MS_MOVE, NULL);
sys_chroot(".");
mount_devfs_fs ();
pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
if (pid > 0) {
while (pid != waitpid(-1, &i, 0))
yield();
}
/* move initrd to rootfs' /old */
sys_fchdir(old_fd);
sys_mount("/", ".", NULL, MS_MOVE, NULL);
/* switch root and cwd back to / of rootfs */
sys_fchdir(root_fd);
sys_chroot(".");
close(old_fd);
close(root_fd);
umount_devfs("/old/dev");
if (real_root_dev == Root_RAM0) {
sys_chdir("/old");
return;
}
ROOT_DEV = real_root_dev;
mount_root();
printk(KERN_NOTICE "Trying to move old root to /initrd ... ");
error = sys_mount("/old", "/root/initrd", NULL, MS_MOVE, NULL);
if (!error)
printk("okay\n");
else {
int fd = open("/dev/root.old", O_RDWR, 0);
printk("failed\n");
printk(KERN_NOTICE "Unmounting old root\n");
sys_umount("/old", MNT_DETACH);
printk(KERN_NOTICE "Trying to free ramdisk memory ... ");
if (fd < 0) {
error = fd;
} else {
error = sys_ioctl(fd, BLKFLSBUF, 0);
close(fd);
}
printk(!error ? "okay\n" : "failed\n");
}
}
int __init initrd_load(void)
{
if (!mount_initrd)
return 0;
create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, 0), NULL);
create_dev("/dev/initrd", MKDEV(RAMDISK_MAJOR, INITRD_MINOR), NULL);
/* Load the initrd data into /dev/ram0. Execute it as initrd unless
* /dev/ram0 is supposed to be our actual root device, in
* that case the ram disk is just set up here, and gets
* mounted in the normal path. */
if (rd_load_image("/dev/initrd") && ROOT_DEV != Root_RAM0) {
handle_initrd();
return 1;
}
return 0;
}
#endif
#ifdef BUILD_CRAMDISK
/*
* gzip declarations
*/
#define OF(args) args
#ifndef memzero
#define memzero(s, n) memset ((s), 0, (n))
#endif
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define INBUFSIZ 4096
#define WSIZE 0x8000 /* window size--must be a power of two, and */
/* at least 32K for zip's deflate method */
static uch *inbuf;
static uch *window;
static unsigned insize; /* valid bytes in inbuf */
static unsigned inptr; /* index of next byte to be processed in inbuf */
static unsigned outcnt; /* bytes in output buffer */
static int exit_code;
static int unzip_error;
static long bytes_out;
static int crd_infd, crd_outfd;
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
/* Diagnostic functions (stubbed out) */
#define Assert(cond,msg)
#define Trace(x)
#define Tracev(x)
#define Tracevv(x)
#define Tracec(c,x)
#define Tracecv(c,x)
#define STATIC static
static int fill_inbuf(void);
static void flush_window(void);
static void *malloc(int size);
static void free(void *where);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
#include "../lib/inflate.c"
static void __init *malloc(int size)
{
return kmalloc(size, GFP_KERNEL);
}
static void __init free(void *where)
{
kfree(where);
}
static void __init gzip_mark(void **ptr)
{
}
static void __init gzip_release(void **ptr)
{
}
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
* Returning -1 does not guarantee that gunzip() will ever return.
*/
static int __init fill_inbuf(void)
{
if (exit_code) return -1;
insize = read(crd_infd, inbuf, INBUFSIZ);
if (insize == 0) {
error("RAMDISK: ran out of compressed data\n");
return -1;
}
inptr = 1;
return inbuf[0];
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
static void __init flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n, written;
uch *in, ch;
written = write(crd_outfd, window, outcnt);
if (written != outcnt && unzip_error == 0) {
printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n",
written, outcnt, bytes_out);
unzip_error = 1;
}
in = window;
for (n = 0; n < outcnt; n++) {
ch = *in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
outcnt = 0;
}
static void __init error(char *x)
{
printk(KERN_ERR "%s", x);
exit_code = 1;
unzip_error = 1;
}
static int __init crd_load(int in_fd, int out_fd)
{
int result;
insize = 0; /* valid bytes in inbuf */
inptr = 0; /* index of next byte to be processed in inbuf */
outcnt = 0; /* bytes in output buffer */
exit_code = 0;
bytes_out = 0;
crc = (ulg)0xffffffffL; /* shift register contents */
crd_infd = in_fd;
crd_outfd = out_fd;
inbuf = kmalloc(INBUFSIZ, GFP_KERNEL);
if (inbuf == 0) {
printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n");
return -1;
}
window = kmalloc(WSIZE, GFP_KERNEL);
if (window == 0) {
printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n");
kfree(inbuf);
return -1;
}
makecrc();
result = gunzip();
if (unzip_error)
result = 1;
kfree(inbuf);
kfree(window);
return result;
}
#endif /* BUILD_CRAMDISK */
kernel/cpufreq.c
View file @ 7e285bef
......@@ -23,11 +23,6 @@
#include <linux/device.h>
#include <linux/slab.h>
#ifdef CONFIG_CPU_FREQ_24_API
#include <linux/proc_fs.h>
#include <linux/sysctl.h>
#endif
/**
* The "cpufreq driver" - the arch- or hardware-dependend low
* level driver of CPUFreq support, and its locking mutex.
......@@ -51,15 +46,6 @@ static struct notifier_block *cpufreq_transition_notifier_list;
static DECLARE_MUTEX (cpufreq_notifier_sem);
#ifdef CONFIG_CPU_FREQ_24_API
/**
* A few values needed by the 2.4.-compatible API
*/
static unsigned int cpu_max_freq[NR_CPUS];
static unsigned int cpu_min_freq[NR_CPUS];
static unsigned int cpu_cur_freq[NR_CPUS];
#endif
LIST_HEAD(cpufreq_governor_list);
static int cpufreq_governor(unsigned int cpu, unsigned int event);
......@@ -359,13 +345,6 @@ static int cpufreq_add_dev (struct device * dev)
return -EINVAL;
down(&cpufreq_driver_sem);
/* 2.4-API init for this CPU */
#ifdef CONFIG_CPU_FREQ_24_API
cpu_min_freq[cpu] = cpufreq_driver->policy[cpu].cpuinfo.min_freq;
cpu_max_freq[cpu] = cpufreq_driver->policy[cpu].cpuinfo.max_freq;
cpu_cur_freq[cpu] = cpufreq_driver->cpu_cur_freq[cpu];
#endif
/* prepare interface data */
cpufreq_driver->policy[cpu].intf.dev = dev;
cpufreq_driver->policy[cpu].intf.intf = &cpufreq_interface;
......@@ -424,398 +403,6 @@ static int cpufreq_remove_dev (struct intf_data *intf)
}
/*********************************************************************
* /proc/sys/cpu/ INTERFACE *
*********************************************************************/
#ifdef CONFIG_CPU_FREQ_24_API
/**
* cpufreq_set - set the CPU frequency
* @freq: target frequency in kHz
* @cpu: CPU for which the frequency is to be set
*
* Sets the CPU frequency to freq.
*/
int cpufreq_set(unsigned int freq, unsigned int cpu)
{
struct cpufreq_policy policy;
down(&cpufreq_driver_sem);
if (!cpufreq_driver || !freq || (cpu > NR_CPUS)) {
up(&cpufreq_driver_sem);
return -EINVAL;
}
policy.min = freq;
policy.max = freq;
policy.policy = CPUFREQ_POLICY_POWERSAVE;
policy.cpu = cpu;
up(&cpufreq_driver_sem);
if (policy.cpu == CPUFREQ_ALL_CPUS)
{
unsigned int i;
unsigned int ret = 0;
for (i=0; i<NR_CPUS; i++)
{
policy.cpu = i;
if (cpu_online(i))
ret |= cpufreq_set_policy(&policy);
}
return ret;
}
else
return cpufreq_set_policy(&policy);
}
EXPORT_SYMBOL_GPL(cpufreq_set);
/**
* cpufreq_setmax - set the CPU to the maximum frequency
* @cpu - affected cpu;
*
* Sets the CPU frequency to the maximum frequency supported by
* this CPU.
*/
int cpufreq_setmax(unsigned int cpu)
{
if (!cpu_online(cpu) && (cpu != CPUFREQ_ALL_CPUS))
return -EINVAL;
return cpufreq_set(cpu_max_freq[cpu], cpu);
}
EXPORT_SYMBOL_GPL(cpufreq_setmax);
/**
* cpufreq_get - get the current CPU frequency (in kHz)
* @cpu: CPU number - currently without effect.
*
* Get the CPU current (static) CPU frequency
*/
unsigned int cpufreq_get(unsigned int cpu)
{
if (!cpu_online(cpu))
return -EINVAL;
return cpu_cur_freq[cpu];
}
EXPORT_SYMBOL(cpufreq_get);
#ifdef CONFIG_SYSCTL
/*********************** cpufreq_sysctl interface ********************/
static int
cpufreq_procctl(ctl_table *ctl, int write, struct file *filp,
void *buffer, size_t *lenp)
{
char buf[16], *p;
int cpu = (int) ctl->extra1;
int len, left = *lenp;
if (!left || (filp->f_pos && !write) || !cpu_online(cpu)) {
*lenp = 0;
return 0;
}
if (write) {
unsigned int freq;
len = left;
if (left > sizeof(buf))
left = sizeof(buf);
if (copy_from_user(buf, buffer, left))
return -EFAULT;
buf[sizeof(buf) - 1] = '\0';
freq = simple_strtoul(buf, &p, 0);
cpufreq_set(freq, cpu);
} else {
len = sprintf(buf, "%d\n", cpufreq_get(cpu));
if (len > left)
len = left;
if (copy_to_user(buffer, buf, len))
return -EFAULT;
}
*lenp = len;
filp->f_pos += len;
return 0;
}
static int
cpufreq_sysctl(ctl_table *table, int *name, int nlen,
void *oldval, size_t *oldlenp,
void *newval, size_t newlen, void **context)
{
int cpu = (int) table->extra1;
if (!cpu_online(cpu))
return -EINVAL;
if (oldval && oldlenp) {
size_t oldlen;
if (get_user(oldlen, oldlenp))
return -EFAULT;
if (oldlen != sizeof(unsigned int))
return -EINVAL;
if (put_user(cpufreq_get(cpu), (unsigned int *)oldval) ||
put_user(sizeof(unsigned int), oldlenp))
return -EFAULT;
}
if (newval && newlen) {
unsigned int freq;
if (newlen != sizeof(unsigned int))
return -EINVAL;
if (get_user(freq, (unsigned int *)newval))
return -EFAULT;
cpufreq_set(freq, cpu);
}
return 1;
}
/* ctl_table ctl_cpu_vars_{0,1,...,(NR_CPUS-1)} */
/* due to NR_CPUS tweaking, a lot of if/endifs are required, sorry */
CTL_TABLE_CPU_VARS(0);
#if NR_CPUS > 1
CTL_TABLE_CPU_VARS(1);
#endif
#if NR_CPUS > 2
CTL_TABLE_CPU_VARS(2);
#endif
#if NR_CPUS > 3
CTL_TABLE_CPU_VARS(3);
#endif
#if NR_CPUS > 4
CTL_TABLE_CPU_VARS(4);
#endif
#if NR_CPUS > 5
CTL_TABLE_CPU_VARS(5);
#endif
#if NR_CPUS > 6
CTL_TABLE_CPU_VARS(6);
#endif
#if NR_CPUS > 7
CTL_TABLE_CPU_VARS(7);
#endif
#if NR_CPUS > 8
CTL_TABLE_CPU_VARS(8);
#endif
#if NR_CPUS > 9
CTL_TABLE_CPU_VARS(9);
#endif
#if NR_CPUS > 10
CTL_TABLE_CPU_VARS(10);
#endif
#if NR_CPUS > 11
CTL_TABLE_CPU_VARS(11);
#endif
#if NR_CPUS > 12
CTL_TABLE_CPU_VARS(12);
#endif
#if NR_CPUS > 13
CTL_TABLE_CPU_VARS(13);
#endif
#if NR_CPUS > 14
CTL_TABLE_CPU_VARS(14);
#endif
#if NR_CPUS > 15
CTL_TABLE_CPU_VARS(15);
#endif
#if NR_CPUS > 16
CTL_TABLE_CPU_VARS(16);
#endif
#if NR_CPUS > 17
CTL_TABLE_CPU_VARS(17);
#endif
#if NR_CPUS > 18
CTL_TABLE_CPU_VARS(18);
#endif
#if NR_CPUS > 19
CTL_TABLE_CPU_VARS(19);
#endif
#if NR_CPUS > 20
CTL_TABLE_CPU_VARS(20);
#endif
#if NR_CPUS > 21
CTL_TABLE_CPU_VARS(21);
#endif
#if NR_CPUS > 22
CTL_TABLE_CPU_VARS(22);
#endif
#if NR_CPUS > 23
CTL_TABLE_CPU_VARS(23);
#endif
#if NR_CPUS > 24
CTL_TABLE_CPU_VARS(24);
#endif
#if NR_CPUS > 25
CTL_TABLE_CPU_VARS(25);
#endif
#if NR_CPUS > 26
CTL_TABLE_CPU_VARS(26);
#endif
#if NR_CPUS > 27
CTL_TABLE_CPU_VARS(27);
#endif
#if NR_CPUS > 28
CTL_TABLE_CPU_VARS(28);
#endif
#if NR_CPUS > 29
CTL_TABLE_CPU_VARS(29);
#endif
#if NR_CPUS > 30
CTL_TABLE_CPU_VARS(30);
#endif
#if NR_CPUS > 31
CTL_TABLE_CPU_VARS(31);
#endif
#if NR_CPUS > 32
#error please extend CPU enumeration
#endif
/* due to NR_CPUS tweaking, a lot of if/endifs are required, sorry */
static ctl_table ctl_cpu_table[NR_CPUS + 1] = {
CPU_ENUM(0),
#if NR_CPUS > 1
CPU_ENUM(1),
#endif
#if NR_CPUS > 2
CPU_ENUM(2),
#endif
#if NR_CPUS > 3
CPU_ENUM(3),
#endif
#if NR_CPUS > 4
CPU_ENUM(4),
#endif
#if NR_CPUS > 5
CPU_ENUM(5),
#endif
#if NR_CPUS > 6
CPU_ENUM(6),
#endif
#if NR_CPUS > 7
CPU_ENUM(7),
#endif
#if NR_CPUS > 8
CPU_ENUM(8),
#endif
#if NR_CPUS > 9
CPU_ENUM(9),
#endif
#if NR_CPUS > 10
CPU_ENUM(10),
#endif
#if NR_CPUS > 11
CPU_ENUM(11),
#endif
#if NR_CPUS > 12
CPU_ENUM(12),
#endif
#if NR_CPUS > 13
CPU_ENUM(13),
#endif
#if NR_CPUS > 14
CPU_ENUM(14),
#endif
#if NR_CPUS > 15
CPU_ENUM(15),
#endif
#if NR_CPUS > 16
CPU_ENUM(16),
#endif
#if NR_CPUS > 17
CPU_ENUM(17),
#endif
#if NR_CPUS > 18
CPU_ENUM(18),
#endif
#if NR_CPUS > 19
CPU_ENUM(19),
#endif
#if NR_CPUS > 20
CPU_ENUM(20),
#endif
#if NR_CPUS > 21
CPU_ENUM(21),
#endif
#if NR_CPUS > 22
CPU_ENUM(22),
#endif
#if NR_CPUS > 23
CPU_ENUM(23),
#endif
#if NR_CPUS > 24
CPU_ENUM(24),
#endif
#if NR_CPUS > 25
CPU_ENUM(25),
#endif
#if NR_CPUS > 26
CPU_ENUM(26),
#endif
#if NR_CPUS > 27
CPU_ENUM(27),
#endif
#if NR_CPUS > 28
CPU_ENUM(28),
#endif
#if NR_CPUS > 29
CPU_ENUM(29),
#endif
#if NR_CPUS > 30
CPU_ENUM(30),
#endif
#if NR_CPUS > 31
CPU_ENUM(31),
#endif
#if NR_CPUS > 32
#error please extend CPU enumeration
#endif
{
.ctl_name = 0,
}
};
static ctl_table ctl_cpu[2] = {
{
.ctl_name = CTL_CPU,
.procname = "cpu",
.mode = 0555,
.child = ctl_cpu_table,
},
{
.ctl_name = 0,
}
};
struct ctl_table_header *cpufreq_sysctl_table;
static inline void cpufreq_sysctl_init(void)
{
cpufreq_sysctl_table = register_sysctl_table(ctl_cpu, 0);
}
static inline void cpufreq_sysctl_exit(void)
{
unregister_sysctl_table(cpufreq_sysctl_table);
}
#else
#define cpufreq_sysctl_init() do {} while(0)
#define cpufreq_sysctl_exit() do {} while(0)
#endif /* CONFIG_SYSCTL */
#endif /* CONFIG_CPU_FREQ_24_API */
/*********************************************************************
* NOTIFIER LISTS INTERFACE *
*********************************************************************/
......@@ -1104,10 +691,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy)
cpufreq_driver->policy[policy->cpu].min = policy->min;
cpufreq_driver->policy[policy->cpu].max = policy->max;
#ifdef CONFIG_CPU_FREQ_24_API
cpu_cur_freq[policy->cpu] = policy->max;
#endif
if (cpufreq_driver->setpolicy) {
cpufreq_driver->policy[policy->cpu].policy = policy->policy;
ret = cpufreq_driver->setpolicy(policy);
......@@ -1189,9 +772,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
case CPUFREQ_POSTCHANGE:
adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
notifier_call_chain(&cpufreq_transition_notifier_list, CPUFREQ_POSTCHANGE, freqs);
#ifdef CONFIG_CPU_FREQ_24_API
cpu_cur_freq[freqs->cpu] = freqs->new;
#endif
cpufreq_driver->policy[freqs->cpu].cur = freqs->new;
break;
}
up(&cpufreq_notifier_sem);
......@@ -1245,10 +826,6 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
up(&cpufreq_driver_sem);
#ifdef CONFIG_CPU_FREQ_24_API
cpufreq_sysctl_init();
#endif
ret = interface_register(&cpufreq_interface);
return ret;
......@@ -1274,10 +851,6 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
return -EINVAL;
}
#ifdef CONFIG_CPU_FREQ_24_API
cpufreq_sysctl_exit();
#endif
/* remove this workaround as soon as interface_add_data works */
{
unsigned int i;
......
scripts/Makefile
View file @ 7e285bef
......@@ -5,7 +5,7 @@
# fix-dep: Used to generate dependency information during build process
# split-include: Divide all config symbols up in a number of files in
# include/config/...
# docproc: Preprocess .tmpl file in order to generate .sgml documentation
# docproc: Preprocess .tmpl file in order to generate .sgml docs
# conmakehash: Create arrays for initializing the kernel console tables
host-progs := fixdep split-include conmakehash docproc kallsyms modpost \
......@@ -14,20 +14,20 @@ build-targets := $(host-progs) empty.o
modpost-objs := modpost.o file2alias.o
clean-files := elfconfig.h
subdir-$(CONFIG_MODVERSIONS) += genksyms
# Let clean descend into subdirs
subdir- := lxdialog kconfig
subdir- += lxdialog kconfig
# fixdep is needed to compile other host programs
$(addprefix $(obj)/,$(filter-out fixdep,$(build-targets))): $(obj)/fixdep
$(addprefix $(obj)/,$(filter-out fixdep,$(build-targets)) $(subdir-y)): $(obj)/fixdep
# dependencies on generated files need to be listed explicitly
$(obj)/modpost.o $(obj)/file2alias.o: $(obj)/elfconfig.h
quiet_cmd_elfconfig = MKELF $@
cmd_elfconfig = $(obj)/mk_elfconfig < $< > $@
cmd_elfconfig = $(obj)/mk_elfconfig $(ARCH) < $< > $@
$(obj)/elfconfig.h: $(obj)/empty.o $(obj)/mk_elfconfig FORCE
$(call if_changed,elfconfig)
......
scripts/Makefile.build
View file @ 7e285bef
......@@ -90,8 +90,7 @@ define rule_vcc_o_c
mv $(@D)/.tmp_$(@F) $@; \
else \
$(CPP) -D__GENKSYMS__ $(c_flags) $< \
| $(GENKSYMS) -k $(VERSION).$(PATCHLEVEL).$(SUBLEVEL) \
| sed -n 's/\#define __ver_\([^ ]*\)[ ]*\([^ ]*\)/__crc_\1 = 0x\2 ;/gp' \
| $(GENKSYMS) \
> $(@D)/.tmp_$(@F:.o=.ver); \
\
$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
......
scripts/Makefile.clean
View file @ 7e285bef
......@@ -35,7 +35,7 @@ subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn))
# ==========================================================================
__clean-files := $(wildcard $(EXTRA_TARGETS) $(host-progs) $(clean-files))
__clean-files := $(wildcard $(EXTRA_TARGETS) $(host-progs) $(clean-files) $(targets))
quiet_cmd_clean = CLEAN $(obj)
cmd_clean = rm -f $(__clean-files); $(clean-rule)
......
scripts/genksyms/Makefile 0 → 100644
View file @ 7e285bef
host-progs := genksyms
build-targets := $(host-progs)
genksyms-objs := genksyms.o parse.o lex.o
HOSTCFLAGS_parse.o := -Wno-uninitialized
# dependencies on generated files need to be listed explicitly
$(obj)/lex.o: $(obj)/parse.h $(obj)/keywords.c
ifdef GENERATE_PARSER
# gperf
quiet_cmd_keywords.c = GPERF $@
cmd_keywords.c = gperf -L ANSI-C -a -C -E -g -H is_reserved_hash \
-k 1,3,$$ -N is_reserved_word -p -t $< > $@
$(obj)/keywords.c: $(obj)/keywords.gperf FORCE
$(call if_changed,keywords.c)
# flex
quiet_cmd_lex.c = FLEX $@
cmd_lex.c = flex -o$@ -d $(filter-out FORCE,$^)
$(obj)/lex.c: $(obj)/lex.l $(obj)/parse.h FORCE
$(call if_changed,lex.c)
# bison
quiet_cmd_parse.c = BISON $@
cmd_parse.c = bison -o$@ -dtv $(filter-out FORCE,$^)
$(obj)/parse.c: $(obj)/parse.y FORCE
$(call if_changed,parse.c)
$(obj)/parse.h: $(obj)/parse.c ;
clean-files += parse.output
endif
targets += $(obj)/keywords.c $(obj)/lex.c $(obj)/parse.c $(obj)/parse.h
scripts/genksyms/genksyms.c 0 → 100644
View file @ 7e285bef
/* Generate kernel symbol version hashes.
Copyright 1996, 1997 Linux International.
New implementation contributed by Richard Henderson <rth@tamu.edu>
Based on original work by Bjorn Ekwall <bj0rn@blox.se>
This file was part of the Linux modutils 2.4.22: moved back into the
kernel sources by Rusty Russell/Kai Germaschewski.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <assert.h>
#include <stdarg.h>
#include <getopt.h>
#include "genksyms.h"
/*----------------------------------------------------------------------*/
#define HASH_BUCKETS 4096
static struct symbol *symtab[HASH_BUCKETS];
FILE *debugfile;
int cur_line = 1;
char *cur_filename, *output_directory;
int flag_debug, flag_dump_defs, flag_warnings;
static int errors;
static int nsyms;
static struct symbol *expansion_trail;
static const char * const symbol_type_name[] = {
"normal", "typedef", "enum", "struct", "union"
};
/*----------------------------------------------------------------------*/
static const unsigned int crctab32[] =
{
0x00000000U, 0x77073096U, 0xee0e612cU, 0x990951baU, 0x076dc419U,
0x706af48fU, 0xe963a535U, 0x9e6495a3U, 0x0edb8832U, 0x79dcb8a4U,
0xe0d5e91eU, 0x97d2d988U, 0x09b64c2bU, 0x7eb17cbdU, 0xe7b82d07U,
0x90bf1d91U, 0x1db71064U, 0x6ab020f2U, 0xf3b97148U, 0x84be41deU,
0x1adad47dU, 0x6ddde4ebU, 0xf4d4b551U, 0x83d385c7U, 0x136c9856U,
0x646ba8c0U, 0xfd62f97aU, 0x8a65c9ecU, 0x14015c4fU, 0x63066cd9U,
0xfa0f3d63U, 0x8d080df5U, 0x3b6e20c8U, 0x4c69105eU, 0xd56041e4U,
0xa2677172U, 0x3c03e4d1U, 0x4b04d447U, 0xd20d85fdU, 0xa50ab56bU,
0x35b5a8faU, 0x42b2986cU, 0xdbbbc9d6U, 0xacbcf940U, 0x32d86ce3U,
0x45df5c75U, 0xdcd60dcfU, 0xabd13d59U, 0x26d930acU, 0x51de003aU,
0xc8d75180U, 0xbfd06116U, 0x21b4f4b5U, 0x56b3c423U, 0xcfba9599U,
0xb8bda50fU, 0x2802b89eU, 0x5f058808U, 0xc60cd9b2U, 0xb10be924U,
0x2f6f7c87U, 0x58684c11U, 0xc1611dabU, 0xb6662d3dU, 0x76dc4190U,
0x01db7106U, 0x98d220bcU, 0xefd5102aU, 0x71b18589U, 0x06b6b51fU,
0x9fbfe4a5U, 0xe8b8d433U, 0x7807c9a2U, 0x0f00f934U, 0x9609a88eU,
0xe10e9818U, 0x7f6a0dbbU, 0x086d3d2dU, 0x91646c97U, 0xe6635c01U,
0x6b6b51f4U, 0x1c6c6162U, 0x856530d8U, 0xf262004eU, 0x6c0695edU,
0x1b01a57bU, 0x8208f4c1U, 0xf50fc457U, 0x65b0d9c6U, 0x12b7e950U,
0x8bbeb8eaU, 0xfcb9887cU, 0x62dd1ddfU, 0x15da2d49U, 0x8cd37cf3U,
0xfbd44c65U, 0x4db26158U, 0x3ab551ceU, 0xa3bc0074U, 0xd4bb30e2U,
0x4adfa541U, 0x3dd895d7U, 0xa4d1c46dU, 0xd3d6f4fbU, 0x4369e96aU,
0x346ed9fcU, 0xad678846U, 0xda60b8d0U, 0x44042d73U, 0x33031de5U,
0xaa0a4c5fU, 0xdd0d7cc9U, 0x5005713cU, 0x270241aaU, 0xbe0b1010U,
0xc90c2086U, 0x5768b525U, 0x206f85b3U, 0xb966d409U, 0xce61e49fU,
0x5edef90eU, 0x29d9c998U, 0xb0d09822U, 0xc7d7a8b4U, 0x59b33d17U,
0x2eb40d81U, 0xb7bd5c3bU, 0xc0ba6cadU, 0xedb88320U, 0x9abfb3b6U,
0x03b6e20cU, 0x74b1d29aU, 0xead54739U, 0x9dd277afU, 0x04db2615U,
0x73dc1683U, 0xe3630b12U, 0x94643b84U, 0x0d6d6a3eU, 0x7a6a5aa8U,
0xe40ecf0bU, 0x9309ff9dU, 0x0a00ae27U, 0x7d079eb1U, 0xf00f9344U,
0x8708a3d2U, 0x1e01f268U, 0x6906c2feU, 0xf762575dU, 0x806567cbU,
0x196c3671U, 0x6e6b06e7U, 0xfed41b76U, 0x89d32be0U, 0x10da7a5aU,
0x67dd4accU, 0xf9b9df6fU, 0x8ebeeff9U, 0x17b7be43U, 0x60b08ed5U,
0xd6d6a3e8U, 0xa1d1937eU, 0x38d8c2c4U, 0x4fdff252U, 0xd1bb67f1U,
0xa6bc5767U, 0x3fb506ddU, 0x48b2364bU, 0xd80d2bdaU, 0xaf0a1b4cU,
0x36034af6U, 0x41047a60U, 0xdf60efc3U, 0xa867df55U, 0x316e8eefU,
0x4669be79U, 0xcb61b38cU, 0xbc66831aU, 0x256fd2a0U, 0x5268e236U,
0xcc0c7795U, 0xbb0b4703U, 0x220216b9U, 0x5505262fU, 0xc5ba3bbeU,
0xb2bd0b28U, 0x2bb45a92U, 0x5cb36a04U, 0xc2d7ffa7U, 0xb5d0cf31U,
0x2cd99e8bU, 0x5bdeae1dU, 0x9b64c2b0U, 0xec63f226U, 0x756aa39cU,
0x026d930aU, 0x9c0906a9U, 0xeb0e363fU, 0x72076785U, 0x05005713U,
0x95bf4a82U, 0xe2b87a14U, 0x7bb12baeU, 0x0cb61b38U, 0x92d28e9bU,
0xe5d5be0dU, 0x7cdcefb7U, 0x0bdbdf21U, 0x86d3d2d4U, 0xf1d4e242U,
0x68ddb3f8U, 0x1fda836eU, 0x81be16cdU, 0xf6b9265bU, 0x6fb077e1U,
0x18b74777U, 0x88085ae6U, 0xff0f6a70U, 0x66063bcaU, 0x11010b5cU,
0x8f659effU, 0xf862ae69U, 0x616bffd3U, 0x166ccf45U, 0xa00ae278U,
0xd70dd2eeU, 0x4e048354U, 0x3903b3c2U, 0xa7672661U, 0xd06016f7U,
0x4969474dU, 0x3e6e77dbU, 0xaed16a4aU, 0xd9d65adcU, 0x40df0b66U,
0x37d83bf0U, 0xa9bcae53U, 0xdebb9ec5U, 0x47b2cf7fU, 0x30b5ffe9U,
0xbdbdf21cU, 0xcabac28aU, 0x53b39330U, 0x24b4a3a6U, 0xbad03605U,
0xcdd70693U, 0x54de5729U, 0x23d967bfU, 0xb3667a2eU, 0xc4614ab8U,
0x5d681b02U, 0x2a6f2b94U, 0xb40bbe37U, 0xc30c8ea1U, 0x5a05df1bU,
0x2d02ef8dU
};
static inline unsigned long
partial_crc32_one(unsigned char c, unsigned long crc)
{
return crctab32[(crc ^ c) & 0xff] ^ (crc >> 8);
}
static inline unsigned long
partial_crc32(const char *s, unsigned long crc)
{
while (*s)
crc = partial_crc32_one(*s++, crc);
return crc;
}
static inline unsigned long
crc32(const char *s)
{
return partial_crc32(s, 0xffffffff) ^ 0xffffffff;
}
/*----------------------------------------------------------------------*/
static inline enum symbol_type
map_to_ns(enum symbol_type t)
{
if (t == SYM_TYPEDEF)
t = SYM_NORMAL;
else if (t == SYM_UNION)
t = SYM_STRUCT;
return t;
}
struct symbol *
find_symbol(const char *name, enum symbol_type ns)
{
unsigned long h = crc32(name) % HASH_BUCKETS;
struct symbol *sym;
for (sym = symtab[h]; sym ; sym = sym->hash_next)
if (map_to_ns(sym->type) == map_to_ns(ns) && strcmp(name, sym->name) == 0)
break;
return sym;
}
struct symbol *
add_symbol(const char *name, enum symbol_type type, struct string_list *defn, int is_extern)
{
unsigned long h = crc32(name) % HASH_BUCKETS;
struct symbol *sym;
for (sym = symtab[h]; sym ; sym = sym->hash_next)
if (map_to_ns(sym->type) == map_to_ns(type)
&& strcmp(name, sym->name) == 0)
{
if (!equal_list(sym->defn, defn))
error_with_pos("redefinition of %s", name);
return sym;
}
sym = xmalloc(sizeof(*sym));
sym->name = name;
sym->type = type;
sym->defn = defn;
sym->expansion_trail = NULL;
sym->is_extern = is_extern;
sym->hash_next = symtab[h];
symtab[h] = sym;
if (flag_debug)
{
fprintf(debugfile, "Defn for %s %s == <", symbol_type_name[type], name);
if (is_extern)
fputs("extern ", debugfile);
print_list(debugfile, defn);
fputs(">\n", debugfile);
}
++nsyms;
return sym;
}
/*----------------------------------------------------------------------*/
inline void
free_node(struct string_list *node)
{
free(node->string);
free(node);
}
void
free_list(struct string_list *s, struct string_list *e)
{
while (s != e)
{
struct string_list *next = s->next;
free_node(s);
s = next;
}
}
inline struct string_list *
copy_node(struct string_list *node)
{
struct string_list *newnode;
newnode = xmalloc(sizeof(*newnode));
newnode->string = xstrdup(node->string);
newnode->tag = node->tag;
return newnode;
}
struct string_list *
copy_list(struct string_list *s, struct string_list *e)
{
struct string_list *h, *p;
if (s == e)
return NULL;
p = h = copy_node(s);
while ((s = s->next) != e)
p = p->next = copy_node(s);
p->next = NULL;
return h;
}
int
equal_list(struct string_list *a, struct string_list *b)
{
while (a && b)
{
if (a->tag != b->tag || strcmp(a->string, b->string))
return 0;
a = a->next;
b = b->next;
}
return !a && !b;
}
static inline void
print_node(FILE *f, struct string_list *list)
{
switch (list->tag)
{
case SYM_STRUCT:
putc('s', f);
goto printit;
case SYM_UNION:
putc('u', f);
goto printit;
case SYM_ENUM:
putc('e', f);
goto printit;
case SYM_TYPEDEF:
putc('t', f);
goto printit;
printit:
putc('#', f);
case SYM_NORMAL:
fputs(list->string, f);
break;
}
}
void
print_list(FILE *f, struct string_list *list)
{
struct string_list **e, **b;
struct string_list *tmp, **tmp2;
int elem = 1;
if (list == NULL)
{
fputs("(nil)", f);
return;
}
tmp = list;
while((tmp = tmp->next) != NULL)
elem++;
b = alloca(elem * sizeof(*e));
e = b + elem;
tmp2 = e - 1;
(*tmp2--) = list;
while((list = list->next) != NULL)
*(tmp2--) = list;
while (b != e)
{
print_node(f, *b++);
putc(' ', f);
}
}
static unsigned long
expand_and_crc_list(struct string_list *list, unsigned long crc)
{
struct string_list **e, **b;
struct string_list *tmp, **tmp2;
int elem = 1;
if (!list)
return crc;
tmp = list;
while((tmp = tmp->next) != NULL)
elem++;
b = alloca(elem * sizeof(*e));
e = b + elem;
tmp2 = e - 1;
*(tmp2--) = list;
while ((list = list->next) != NULL)
*(tmp2--) = list;
while (b != e)
{
struct string_list *cur;
struct symbol *subsym;
cur = *(b++);
switch (cur->tag)
{
case SYM_NORMAL:
if (flag_dump_defs)
fprintf(debugfile, "%s ", cur->string);
crc = partial_crc32(cur->string, crc);
crc = partial_crc32_one(' ', crc);
break;
case SYM_TYPEDEF:
subsym = find_symbol(cur->string, cur->tag);
if (subsym->expansion_trail)
{
if (flag_dump_defs)
fprintf(debugfile, "%s ", cur->string);
crc = partial_crc32(cur->string, crc);
crc = partial_crc32_one(' ', crc);
}
else
{
subsym->expansion_trail = expansion_trail;
expansion_trail = subsym;
crc = expand_and_crc_list(subsym->defn, crc);
}
break;
case SYM_STRUCT:
case SYM_UNION:
case SYM_ENUM:
subsym = find_symbol(cur->string, cur->tag);
if (!subsym)
{
struct string_list *n, *t = NULL;
error_with_pos("expand undefined %s %s",
symbol_type_name[cur->tag], cur->string);
n = xmalloc(sizeof(*n));
n->string = xstrdup(symbol_type_name[cur->tag]);
n->tag = SYM_NORMAL;
n->next = t;
t = n;
n = xmalloc(sizeof(*n));
n->string = xstrdup(cur->string);
n->tag = SYM_NORMAL;
n->next = t;
t = n;
n = xmalloc(sizeof(*n));
n->string = xstrdup("{ UNKNOWN }");
n->tag = SYM_NORMAL;
n->next = t;
subsym = add_symbol(cur->string, cur->tag, n, 0);
}
if (subsym->expansion_trail)
{
if (flag_dump_defs)
{
fprintf(debugfile, "%s %s ", symbol_type_name[cur->tag],
cur->string);
}
crc = partial_crc32(symbol_type_name[cur->tag], crc);
crc = partial_crc32_one(' ', crc);
crc = partial_crc32(cur->string, crc);
crc = partial_crc32_one(' ', crc);
}
else
{
subsym->expansion_trail = expansion_trail;
expansion_trail = subsym;
crc = expand_and_crc_list(subsym->defn, crc);
}
break;
}
}
return crc;
}
void
export_symbol(const char *name)
{
struct symbol *sym;
sym = find_symbol(name, SYM_NORMAL);
if (!sym)
error_with_pos("export undefined symbol %s", name);
else
{
unsigned long crc;
if (flag_dump_defs)
fprintf(debugfile, "Export %s == <", name);
expansion_trail = (struct symbol *)-1L;
crc = expand_and_crc_list(sym->defn, 0xffffffff) ^ 0xffffffff;
sym = expansion_trail;
while (sym != (struct symbol *)-1L)
{
struct symbol *n = sym->expansion_trail;
sym->expansion_trail = 0;
sym = n;
}
if (flag_dump_defs)
fputs(">\n", debugfile);
/* Used as a linker script. */
printf("__crc_%s = 0x%08lx ;\n", name, crc);
}
}
/*----------------------------------------------------------------------*/
void
error(const char *fmt, ...)
{
va_list args;
if (flag_warnings)
{
va_start(args, fmt);
vfprintf(stderr, fmt, args);
va_end(args);
putc('\n', stderr);
errors++;
}
}
void
error_with_pos(const char *fmt, ...)
{
va_list args;
if (flag_warnings)
{
fprintf(stderr, "%s:%d: ", cur_filename ? : "<stdin>", cur_line);
va_start(args, fmt);
vfprintf(stderr, fmt, args);
va_end(args);
putc('\n', stderr);
errors++;
}
}
void genksyms_usage(void)
{
fputs("Usage:\n"
"genksyms [-dDwqhV] > /path/to/.tmp_obj.ver\n"
"\n"
" -d, --debug Increment the debug level (repeatable)\n"
" -D, --dump Dump expanded symbol defs (for debugging only)\n"
" -w, --warnings Enable warnings\n"
" -q, --quiet Disable warnings (default)\n"
" -h, --help Print this message\n"
" -V, --version Print the release version\n"
, stderr);
}
int
main(int argc, char **argv)
{
int o;
struct option long_opts[] = {
{"debug", 0, 0, 'd'},
{"warnings", 0, 0, 'w'},
{"quiet", 0, 0, 'q'},
{"dump", 0, 0, 'D'},
{"version", 0, 0, 'V'},
{"help", 0, 0, 'h'},
{0, 0, 0, 0}
};
while ((o = getopt_long(argc, argv, "dwqVDk:p:",
&long_opts[0], NULL)) != EOF)
switch (o)
{
case 'd':
flag_debug++;
break;
case 'w':
flag_warnings = 1;
break;
case 'q':
flag_warnings = 0;
break;
case 'V':
fputs("genksyms version 2.5.60\n", stderr);
break;
case 'D':
flag_dump_defs = 1;
break;
case 'h':
genksyms_usage();
return 0;
default:
genksyms_usage();
return 1;
}
{
extern int yydebug;
extern int yy_flex_debug;
yydebug = (flag_debug > 1);
yy_flex_debug = (flag_debug > 2);
debugfile = stderr;
/* setlinebuf(debugfile); */
}
yyparse();
if (flag_debug)
{
fprintf(debugfile, "Hash table occupancy %d/%d = %g\n",
nsyms, HASH_BUCKETS, (double)nsyms / (double)HASH_BUCKETS);
}
return errors != 0;
}
scripts/genksyms/genksyms.h 0 → 100644
View file @ 7e285bef
/* Generate kernel symbol version hashes.
Copyright 1996, 1997 Linux International.
New implementation contributed by Richard Henderson <rth@tamu.edu>
Based on original work by Bjorn Ekwall <bj0rn@blox.se>
This file is part of the Linux modutils.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#ifndef MODUTILS_GENKSYMS_H
#define MODUTILS_GENKSYMS_H 1
#include <stdio.h>
#include <assert.h>
enum symbol_type
{
SYM_NORMAL, SYM_TYPEDEF, SYM_ENUM, SYM_STRUCT, SYM_UNION
};
struct string_list
{
struct string_list *next;
enum symbol_type tag;
char *string;
};
struct symbol
{
struct symbol *hash_next;
const char *name;
enum symbol_type type;
struct string_list *defn;
struct symbol *expansion_trail;
int is_extern;
};
typedef struct string_list **yystype;
#define YYSTYPE yystype
extern FILE *outfile, *debugfile;
extern int cur_line;
extern char *cur_filename, *output_directory;
extern int flag_debug, flag_dump_defs, flag_warnings;
extern int checksum_version, kernel_version;
extern int want_brace_phrase, want_exp_phrase, discard_phrase_contents;
extern struct string_list *current_list, *next_list;
struct symbol *find_symbol(const char *name, enum symbol_type ns);
struct symbol *add_symbol(const char *name, enum symbol_type type,
struct string_list *defn, int is_extern);
void export_symbol(const char *);
struct string_list *reset_list(void);
void free_list(struct string_list *s, struct string_list *e);
void free_node(struct string_list *list);
struct string_list *copy_node(struct string_list *);
struct string_list *copy_list(struct string_list *s, struct string_list *e);
int equal_list(struct string_list *a, struct string_list *b);
void print_list(FILE *, struct string_list *list);
int yylex(void);
int yyparse(void);
void error_with_pos(const char *, ...);
#define version(a,b,c) ((a << 16) | (b << 8) | (c))
/*----------------------------------------------------------------------*/
#define MODUTILS_VERSION "<in-kernel>"
#define xmalloc(size) ({ void *__ptr = malloc(size); assert(__ptr || size == 0); __ptr; })
#define xstrdup(str) ({ char *__str = strdup(str); assert(__str); __str; })
#endif /* genksyms.h */
scripts/genksyms/keywords.c_shipped 0 → 100644
View file @ 7e285bef
/* ANSI-C code produced by gperf version 2.7.2 */
/* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */
struct resword { const char *name; int token; };
/* maximum key range = 109, duplicates = 0 */
#ifdef __GNUC__
__inline
#else
#ifdef __cplusplus
inline
#endif
#endif
static unsigned int
is_reserved_hash (register const char *str, register unsigned int len)
{
static const unsigned char asso_values[] =
{
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 5,
113, 113, 113, 113, 113, 113, 0, 113, 113, 113,
0, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 0, 113, 0, 113, 20,
25, 0, 35, 30, 113, 20, 113, 113, 40, 30,
30, 0, 0, 113, 0, 51, 0, 15, 5, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113, 113, 113, 113, 113,
113, 113, 113, 113, 113, 113
};
return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]];
}
#ifdef __GNUC__
__inline
#endif
const struct resword *
is_reserved_word (register const char *str, register unsigned int len)
{
enum
{
TOTAL_KEYWORDS = 41,
MIN_WORD_LENGTH = 3,
MAX_WORD_LENGTH = 17,
MIN_HASH_VALUE = 4,
MAX_HASH_VALUE = 112
};
static const struct resword wordlist[] =
{
{""}, {""}, {""}, {""},
{"auto", AUTO_KEYW},
{""}, {""},
{"__asm__", ASM_KEYW},
{""},
{"_restrict", RESTRICT_KEYW},
{"__typeof__", TYPEOF_KEYW},
{"__attribute", ATTRIBUTE_KEYW},
{"__restrict__", RESTRICT_KEYW},
{"__attribute__", ATTRIBUTE_KEYW},
{""},
{"__volatile", VOLATILE_KEYW},
{""},
{"__volatile__", VOLATILE_KEYW},
{"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
{""}, {""}, {""},
{"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
{"int", INT_KEYW},
{"char", CHAR_KEYW},
{""}, {""},
{"__const", CONST_KEYW},
{"__inline", INLINE_KEYW},
{"__const__", CONST_KEYW},
{"__inline__", INLINE_KEYW},
{""}, {""}, {""}, {""},
{"__asm", ASM_KEYW},
{"extern", EXTERN_KEYW},
{""},
{"register", REGISTER_KEYW},
{""},
{"float", FLOAT_KEYW},
{"typeof", TYPEOF_KEYW},
{"typedef", TYPEDEF_KEYW},
{""}, {""},
{"_Bool", BOOL_KEYW},
{"double", DOUBLE_KEYW},
{""}, {""},
{"enum", ENUM_KEYW},
{""}, {""}, {""},
{"volatile", VOLATILE_KEYW},
{"void", VOID_KEYW},
{"const", CONST_KEYW},
{"short", SHORT_KEYW},
{"struct", STRUCT_KEYW},
{""},
{"restrict", RESTRICT_KEYW},
{""},
{"__signed__", SIGNED_KEYW},
{""},
{"asm", ASM_KEYW},
{""}, {""},
{"inline", INLINE_KEYW},
{""}, {""}, {""},
{"union", UNION_KEYW},
{""}, {""}, {""}, {""}, {""}, {""},
{"static", STATIC_KEYW},
{""}, {""}, {""}, {""}, {""}, {""},
{"__signed", SIGNED_KEYW},
{""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""},
{""}, {""}, {""}, {""}, {""},
{"unsigned", UNSIGNED_KEYW},
{""}, {""}, {""}, {""},
{"long", LONG_KEYW},
{""}, {""}, {""}, {""}, {""}, {""}, {""},
{"signed", SIGNED_KEYW}
};
if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
{
register int key = is_reserved_hash (str, len);
if (key <= MAX_HASH_VALUE && key >= 0)
{
register const char *s = wordlist[key].name;
if (*str == *s && !strcmp (str + 1, s + 1))
return &wordlist[key];
}
}
return 0;
}
scripts/genksyms/keywords.gperf 0 → 100644
View file @ 7e285bef
%{
%}
struct resword { const char *name; int token; }
%%
EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW
EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
__asm, ASM_KEYW
__asm__, ASM_KEYW
__attribute, ATTRIBUTE_KEYW
__attribute__, ATTRIBUTE_KEYW
__const, CONST_KEYW
__const__, CONST_KEYW
__inline, INLINE_KEYW
__inline__, INLINE_KEYW
__signed, SIGNED_KEYW
__signed__, SIGNED_KEYW
__volatile, VOLATILE_KEYW
__volatile__, VOLATILE_KEYW
# According to rth, c99 defines _Bool, __restrict, __restrict__, restrict. KAO
_Bool, BOOL_KEYW
_restrict, RESTRICT_KEYW
__restrict__, RESTRICT_KEYW
restrict, RESTRICT_KEYW
asm, ASM_KEYW
# attribute commented out in modutils 2.4.2. People are using 'attribute' as a
# field name which breaks the genksyms parser. It is not a gcc keyword anyway.
# KAO.
# attribute, ATTRIBUTE_KEYW
auto, AUTO_KEYW
char, CHAR_KEYW
const, CONST_KEYW
double, DOUBLE_KEYW
enum, ENUM_KEYW
extern, EXTERN_KEYW
float, FLOAT_KEYW
inline, INLINE_KEYW
int, INT_KEYW
long, LONG_KEYW
register, REGISTER_KEYW
short, SHORT_KEYW
signed, SIGNED_KEYW
static, STATIC_KEYW
struct, STRUCT_KEYW
typedef, TYPEDEF_KEYW
union, UNION_KEYW
unsigned, UNSIGNED_KEYW
void, VOID_KEYW
volatile, VOLATILE_KEYW
typeof, TYPEOF_KEYW
__typeof__, TYPEOF_KEYW
scripts/genksyms/lex.c_shipped 0 → 100644
View file @ 7e285bef
#line 2 "scripts/genksyms/lex.c"
/* A lexical scanner generated by flex */
/* Scanner skeleton version:
* $Header: /home/daffy/u0/vern/flex/RCS/flex.skl,v 2.91 96/09/10 16:58:48 vern Exp $
*/
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
#include <stdio.h>
#include <unistd.h>
/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
#ifdef c_plusplus
#ifndef __cplusplus
#define __cplusplus
#endif
#endif
#ifdef __cplusplus
#include <stdlib.h>
/* Use prototypes in function declarations. */
#define YY_USE_PROTOS
/* The "const" storage-class-modifier is valid. */
#define YY_USE_CONST
#else /* ! __cplusplus */
#if __STDC__
#define YY_USE_PROTOS
#define YY_USE_CONST
#endif /* __STDC__ */
#endif /* ! __cplusplus */
#ifdef __TURBOC__
#pragma warn -rch
#pragma warn -use
#include <io.h>
#include <stdlib.h>
#define YY_USE_CONST
#define YY_USE_PROTOS
#endif
#ifdef YY_USE_CONST
#define yyconst const
#else
#define yyconst
#endif
#ifdef YY_USE_PROTOS
#define YY_PROTO(proto) proto
#else
#define YY_PROTO(proto) ()
#endif
/* Returned upon end-of-file. */
#define YY_NULL 0
/* Promotes a possibly negative, possibly signed char to an unsigned
* integer for use as an array index. If the signed char is negative,
* we want to instead treat it as an 8-bit unsigned char, hence the
* double cast.
*/
#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
/* Enter a start condition. This macro really ought to take a parameter,
* but we do it the disgusting crufty way forced on us by the ()-less
* definition of BEGIN.
*/
#define BEGIN yy_start = 1 + 2 *
/* Translate the current start state into a value that can be later handed
* to BEGIN to return to the state. The YYSTATE alias is for lex
* compatibility.
*/
#define YY_START ((yy_start - 1) / 2)
#define YYSTATE YY_START
/* Action number for EOF rule of a given start state. */
#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
/* Special action meaning "start processing a new file". */
#define YY_NEW_FILE yyrestart( yyin )
#define YY_END_OF_BUFFER_CHAR 0
/* Size of default input buffer. */
#define YY_BUF_SIZE 16384
typedef struct yy_buffer_state *YY_BUFFER_STATE;
extern int yyleng;
extern FILE *yyin, *yyout;
#define EOB_ACT_CONTINUE_SCAN 0
#define EOB_ACT_END_OF_FILE 1
#define EOB_ACT_LAST_MATCH 2
/* The funky do-while in the following #define is used to turn the definition
* int a single C statement (which needs a semi-colon terminator). This
* avoids problems with code like:
*
* if ( condition_holds )
* yyless( 5 );
* else
* do_something_else();
*
* Prior to using the do-while the compiler would get upset at the
* "else" because it interpreted the "if" statement as being all
* done when it reached the ';' after the yyless() call.
*/
/* Return all but the first 'n' matched characters back to the input stream. */
#define yyless(n) \
do \
{ \
/* Undo effects of setting up yytext. */ \
*yy_cp = yy_hold_char; \
YY_RESTORE_YY_MORE_OFFSET \
yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
YY_DO_BEFORE_ACTION; /* set up yytext again */ \
} \
while ( 0 )
#define unput(c) yyunput( c, yytext_ptr )
/* The following is because we cannot portably get our hands on size_t
* (without autoconf's help, which isn't available because we want
* flex-generated scanners to compile on their own).
*/
typedef unsigned int yy_size_t;
struct yy_buffer_state
{
FILE *yy_input_file;
char *yy_ch_buf; /* input buffer */
char *yy_buf_pos; /* current position in input buffer */
/* Size of input buffer in bytes, not including room for EOB
* characters.
*/
yy_size_t yy_buf_size;
/* Number of characters read into yy_ch_buf, not including EOB
* characters.
*/
int yy_n_chars;
/* Whether we "own" the buffer - i.e., we know we created it,
* and can realloc() it to grow it, and should free() it to
* delete it.
*/
int yy_is_our_buffer;
/* Whether this is an "interactive" input source; if so, and
* if we're using stdio for input, then we want to use getc()
* instead of fread(), to make sure we stop fetching input after
* each newline.
*/
int yy_is_interactive;
/* Whether we're considered to be at the beginning of a line.
* If so, '^' rules will be active on the next match, otherwise
* not.
*/
int yy_at_bol;
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
int yy_fill_buffer;
int yy_buffer_status;
#define YY_BUFFER_NEW 0
#define YY_BUFFER_NORMAL 1
/* When an EOF's been seen but there's still some text to process
* then we mark the buffer as YY_EOF_PENDING, to indicate that we
* shouldn't try reading from the input source any more. We might
* still have a bunch of tokens to match, though, because of
* possible backing-up.
*
* When we actually see the EOF, we change the status to "new"
* (via yyrestart()), so that the user can continue scanning by
* just pointing yyin at a new input file.
*/
#define YY_BUFFER_EOF_PENDING 2
};
static YY_BUFFER_STATE yy_current_buffer = 0;
/* We provide macros for accessing buffer states in case in the
* future we want to put the buffer states in a more general
* "scanner state".
*/
#define YY_CURRENT_BUFFER yy_current_buffer
/* yy_hold_char holds the character lost when yytext is formed. */
static char yy_hold_char;
static int yy_n_chars; /* number of characters read into yy_ch_buf */
int yyleng;
/* Points to current character in buffer. */
static char *yy_c_buf_p = (char *) 0;
static int yy_init = 1; /* whether we need to initialize */
static int yy_start = 0; /* start state number */
/* Flag which is used to allow yywrap()'s to do buffer switches
* instead of setting up a fresh yyin. A bit of a hack ...
*/
static int yy_did_buffer_switch_on_eof;
void yyrestart YY_PROTO(( FILE *input_file ));
void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
void yy_load_buffer_state YY_PROTO(( void ));
YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
static void yy_flex_free YY_PROTO(( void * ));
#define yy_new_buffer yy_create_buffer
#define yy_set_interactive(is_interactive) \
{ \
if ( ! yy_current_buffer ) \
yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
yy_current_buffer->yy_is_interactive = is_interactive; \
}
#define yy_set_bol(at_bol) \
{ \
if ( ! yy_current_buffer ) \
yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
yy_current_buffer->yy_at_bol = at_bol; \
}
#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
#define yywrap() 1
#define YY_SKIP_YYWRAP
#define FLEX_DEBUG
typedef unsigned char YY_CHAR;
FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
typedef int yy_state_type;
#define FLEX_DEBUG
extern char *yytext;
#define yytext_ptr yytext
static yy_state_type yy_get_previous_state YY_PROTO(( void ));
static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
static int yy_get_next_buffer YY_PROTO(( void ));
static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));
/* Done after the current pattern has been matched and before the
* corresponding action - sets up yytext.
*/
#define YY_DO_BEFORE_ACTION \
yytext_ptr = yy_bp; \
yyleng = (int) (yy_cp - yy_bp); \
yy_hold_char = *yy_cp; \
*yy_cp = '\0'; \
yy_c_buf_p = yy_cp;
#define YY_NUM_RULES 13
#define YY_END_OF_BUFFER 14
static yyconst short int yy_accept[76] =
{ 0,
0, 0, 0, 0, 14, 12, 4, 3, 12, 12,
12, 7, 7, 12, 12, 12, 12, 12, 9, 9,
12, 12, 12, 4, 0, 5, 0, 0, 6, 0,
0, 7, 0, 0, 0, 0, 2, 8, 10, 10,
9, 0, 0, 9, 9, 0, 9, 0, 0, 11,
0, 0, 0, 10, 0, 10, 9, 9, 0, 0,
0, 0, 0, 0, 0, 10, 10, 0, 0, 0,
0, 0, 0, 1, 0
} ;
static yyconst int yy_ec[256] =
{ 0,
1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
4, 4, 4, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 2, 1, 5, 6, 1, 7, 8, 9, 1,
1, 7, 10, 1, 11, 12, 7, 13, 14, 14,
14, 14, 14, 14, 14, 15, 15, 1, 1, 16,
17, 18, 1, 1, 19, 19, 19, 19, 20, 21,
22, 22, 22, 22, 22, 23, 22, 22, 22, 22,
22, 22, 22, 22, 24, 22, 22, 25, 22, 22,
1, 26, 1, 7, 22, 1, 19, 19, 19, 19,
20, 21, 22, 22, 22, 22, 22, 27, 22, 22,
22, 22, 22, 22, 22, 22, 24, 22, 22, 25,
22, 22, 1, 28, 1, 7, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1
} ;
static yyconst int yy_meta[29] =
{ 0,
1, 1, 2, 1, 1, 1, 1, 1, 1, 3,
3, 4, 5, 5, 5, 1, 1, 1, 6, 7,
6, 8, 8, 8, 8, 1, 8, 1
} ;
static yyconst short int yy_base[88] =
{ 0,
0, 166, 22, 152, 151, 282, 39, 282, 26, 33,
138, 0, 39, 43, 124, 39, 36, 48, 52, 55,
41, 56, 54, 47, 73, 282, 0, 72, 282, 0,
116, 0, 78, 75, 122, 103, 282, 282, 106, 0,
97, 73, 76, 91, 65, 0, 0, 84, 81, 282,
132, 98, 84, 282, 117, 147, 282, 73, 134, 89,
100, 140, 172, 139, 134, 181, 282, 135, 106, 142,
168, 88, 52, 282, 282, 208, 216, 220, 228, 236,
244, 249, 254, 255, 260, 265, 273
} ;
static yyconst short int yy_def[88] =
{ 0,
75, 1, 1, 3, 75, 75, 75, 75, 76, 77,
75, 78, 78, 79, 75, 75, 75, 75, 75, 19,
75, 75, 75, 75, 76, 75, 80, 77, 75, 81,
75, 78, 76, 77, 79, 79, 75, 75, 75, 39,
19, 82, 83, 75, 75, 84, 20, 76, 77, 75,
79, 51, 85, 75, 75, 75, 75, 84, 79, 51,
79, 79, 79, 51, 75, 75, 75, 86, 79, 63,
86, 87, 87, 75, 0, 75, 75, 75, 75, 75,
75, 75, 75, 75, 75, 75, 75
} ;
static yyconst short int yy_nxt[311] =
{ 0,
6, 7, 8, 7, 9, 6, 6, 6, 10, 6,
6, 11, 6, 6, 6, 6, 6, 6, 12, 12,
12, 12, 13, 12, 12, 6, 12, 6, 15, 16,
26, 15, 17, 18, 19, 20, 20, 21, 15, 22,
24, 29, 24, 33, 36, 37, 38, 34, 24, 23,
24, 27, 38, 38, 74, 38, 38, 38, 30, 31,
39, 39, 39, 40, 41, 41, 42, 47, 47, 47,
38, 43, 38, 38, 44, 45, 46, 26, 44, 75,
29, 38, 26, 29, 40, 55, 55, 57, 26, 29,
74, 57, 43, 65, 65, 44, 45, 30, 27, 44,
30, 59, 37, 27, 36, 37, 30, 59, 37, 27,
64, 64, 64, 35, 57, 51, 52, 52, 39, 39,
39, 75, 35, 69, 37, 53, 54, 50, 54, 56,
56, 56, 54, 59, 37, 59, 37, 37, 68, 35,
38, 59, 37, 59, 60, 60, 66, 66, 66, 31,
75, 64, 64, 64, 61, 62, 63, 14, 61, 56,
56, 56, 69, 35, 61, 62, 69, 67, 61, 67,
37, 14, 72, 67, 37, 75, 75, 75, 75, 75,
75, 75, 75, 75, 70, 70, 70, 75, 75, 75,
70, 70, 70, 66, 66, 66, 75, 75, 75, 75,
75, 54, 75, 54, 75, 75, 75, 54, 25, 25,
25, 25, 25, 25, 25, 25, 28, 28, 28, 28,
28, 28, 28, 28, 32, 32, 32, 32, 35, 35,
35, 35, 35, 35, 35, 35, 48, 75, 48, 48,
48, 48, 48, 48, 49, 75, 49, 49, 49, 49,
49, 49, 42, 42, 75, 42, 56, 75, 56, 58,
58, 58, 66, 75, 66, 71, 71, 71, 71, 71,
71, 71, 71, 73, 73, 73, 73, 73, 73, 73,
73, 5, 75, 75, 75, 75, 75, 75, 75, 75,
75, 75, 75, 75, 75, 75, 75, 75, 75, 75,
75, 75, 75, 75, 75, 75, 75, 75, 75, 75
} ;
static yyconst short int yy_chk[311] =
{ 0,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 3, 3,
9, 3, 3, 3, 3, 3, 3, 3, 3, 3,
7, 10, 7, 13, 14, 14, 16, 13, 24, 3,
24, 9, 17, 17, 73, 16, 21, 21, 10, 18,
18, 18, 18, 19, 19, 19, 19, 20, 20, 20,
23, 19, 22, 22, 19, 19, 19, 25, 19, 20,
28, 23, 33, 34, 42, 43, 43, 45, 48, 49,
72, 45, 42, 53, 53, 58, 58, 28, 25, 58,
34, 61, 61, 33, 36, 36, 49, 69, 69, 48,
52, 52, 52, 60, 44, 36, 36, 36, 39, 39,
39, 41, 52, 61, 35, 39, 39, 31, 39, 55,
55, 55, 39, 51, 51, 59, 59, 68, 59, 68,
15, 62, 62, 70, 51, 51, 65, 65, 65, 11,
5, 64, 64, 64, 51, 51, 51, 4, 51, 56,
56, 56, 62, 64, 70, 70, 62, 56, 70, 56,
71, 2, 71, 56, 63, 0, 0, 0, 0, 0,
0, 0, 0, 0, 63, 63, 63, 0, 0, 0,
63, 63, 63, 66, 66, 66, 0, 0, 0, 0,
0, 66, 0, 66, 0, 0, 0, 66, 76, 76,
76, 76, 76, 76, 76, 76, 77, 77, 77, 77,
77, 77, 77, 77, 78, 78, 78, 78, 79, 79,
79, 79, 79, 79, 79, 79, 80, 0, 80, 80,
80, 80, 80, 80, 81, 0, 81, 81, 81, 81,
81, 81, 82, 82, 0, 82, 83, 0, 83, 84,
84, 84, 85, 0, 85, 86, 86, 86, 86, 86,
86, 86, 86, 87, 87, 87, 87, 87, 87, 87,
87, 75, 75, 75, 75, 75, 75, 75, 75, 75,
75, 75, 75, 75, 75, 75, 75, 75, 75, 75,
75, 75, 75, 75, 75, 75, 75, 75, 75, 75
} ;
static yy_state_type yy_last_accepting_state;
static char *yy_last_accepting_cpos;
extern int yy_flex_debug;
int yy_flex_debug = 1;
static yyconst short int yy_rule_linenum[13] =
{ 0,
69, 70, 71, 74, 77, 78, 79, 85, 86, 87,
89, 92
} ;
/* The intent behind this definition is that it'll catch
* any uses of REJECT which flex missed.
*/
#define REJECT reject_used_but_not_detected
#define yymore() yymore_used_but_not_detected
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
char *yytext;
#line 1 "scripts/genksyms/lex.l"
#define INITIAL 0
/* Lexical analysis for genksyms.
Copyright 1996, 1997 Linux International.
New implementation contributed by Richard Henderson <rth@tamu.edu>
Based on original work by Bjorn Ekwall <bj0rn@blox.se>
Taken from Linux modutils 2.4.22.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#line 25 "scripts/genksyms/lex.l"
#include <limits.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include "genksyms.h"
#include "parse.h"
/* We've got a two-level lexer here. We let flex do basic tokenization
and then we categorize those basic tokens in the second stage. */
#define YY_DECL static int yylex1(void)
/* Version 2 checksumming does proper tokenization; version 1 wasn't
quite so pedantic. */
#define V2_TOKENS 1
/* We don't do multiple input files. */
#line 511 "scripts/genksyms/lex.c"
/* Macros after this point can all be overridden by user definitions in
* section 1.
*/
#ifndef YY_SKIP_YYWRAP
#ifdef __cplusplus
extern "C" int yywrap YY_PROTO(( void ));
#else
extern int yywrap YY_PROTO(( void ));
#endif
#endif
#ifndef YY_NO_UNPUT
static void yyunput YY_PROTO(( int c, char *buf_ptr ));
#endif
#ifndef yytext_ptr
static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
#endif
#ifdef YY_NEED_STRLEN
static int yy_flex_strlen YY_PROTO(( yyconst char * ));
#endif
#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput YY_PROTO(( void ));
#else
static int input YY_PROTO(( void ));
#endif
#endif
#if YY_STACK_USED
static int yy_start_stack_ptr = 0;
static int yy_start_stack_depth = 0;
static int *yy_start_stack = 0;
#ifndef YY_NO_PUSH_STATE
static void yy_push_state YY_PROTO(( int new_state ));
#endif
#ifndef YY_NO_POP_STATE
static void yy_pop_state YY_PROTO(( void ));
#endif
#ifndef YY_NO_TOP_STATE
static int yy_top_state YY_PROTO(( void ));
#endif
#else
#define YY_NO_PUSH_STATE 1
#define YY_NO_POP_STATE 1
#define YY_NO_TOP_STATE 1
#endif
#ifdef YY_MALLOC_DECL
YY_MALLOC_DECL
#else
#if __STDC__
#ifndef __cplusplus
#include <stdlib.h>
#endif
#else
/* Just try to get by without declaring the routines. This will fail
* miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
* or sizeof(void*) != sizeof(int).
*/
#endif
#endif
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#define YY_READ_BUF_SIZE 8192
#endif
/* Copy whatever the last rule matched to the standard output. */
#ifndef ECHO
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
* is returned in "result".
*/
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
if ( yy_current_buffer->yy_is_interactive ) \
{ \
int c = '*', n; \
for ( n = 0; n < max_size && \
(c = getc( yyin )) != EOF && c != '\n'; ++n ) \
buf[n] = (char) c; \
if ( c == '\n' ) \
buf[n++] = (char) c; \
if ( c == EOF && ferror( yyin ) ) \
YY_FATAL_ERROR( "input in flex scanner failed" ); \
result = n; \
} \
else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
&& ferror( yyin ) ) \
YY_FATAL_ERROR( "input in flex scanner failed" );
#endif
/* No semi-colon after return; correct usage is to write "yyterminate();" -
* we don't want an extra ';' after the "return" because that will cause
* some compilers to complain about unreachable statements.
*/
#ifndef yyterminate
#define yyterminate() return YY_NULL
#endif
/* Number of entries by which start-condition stack grows. */
#ifndef YY_START_STACK_INCR
#define YY_START_STACK_INCR 25
#endif
/* Report a fatal error. */
#ifndef YY_FATAL_ERROR
#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
#endif
/* Default declaration of generated scanner - a define so the user can
* easily add parameters.
*/
#ifndef YY_DECL
#define YY_DECL int yylex YY_PROTO(( void ))
#endif
/* Code executed at the beginning of each rule, after yytext and yyleng
* have been set up.
*/
#ifndef YY_USER_ACTION
#define YY_USER_ACTION
#endif
/* Code executed at the end of each rule. */
#ifndef YY_BREAK
#define YY_BREAK break;
#endif
#define YY_RULE_SETUP \
if ( yyleng > 0 ) \
yy_current_buffer->yy_at_bol = \
(yytext[yyleng - 1] == '\n'); \
YY_USER_ACTION
YY_DECL
{
register yy_state_type yy_current_state;
register char *yy_cp = NULL, *yy_bp = NULL;
register int yy_act;
#line 65 "scripts/genksyms/lex.l"
/* Keep track of our location in the original source files. */
#line 670 "scripts/genksyms/lex.c"
if ( yy_init )
{
yy_init = 0;
#ifdef YY_USER_INIT
YY_USER_INIT;
#endif
if ( ! yy_start )
yy_start = 1; /* first start state */
if ( ! yyin )
yyin = stdin;
if ( ! yyout )
yyout = stdout;
if ( ! yy_current_buffer )
yy_current_buffer =
yy_create_buffer( yyin, YY_BUF_SIZE );
yy_load_buffer_state();
}
while ( 1 ) /* loops until end-of-file is reached */
{
yy_cp = yy_c_buf_p;
/* Support of yytext. */
*yy_cp = yy_hold_char;
/* yy_bp points to the position in yy_ch_buf of the start of
* the current run.
*/
yy_bp = yy_cp;
yy_current_state = yy_start;
yy_current_state += YY_AT_BOL();
yy_match:
do
{
register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
if ( yy_accept[yy_current_state] )
{
yy_last_accepting_state = yy_current_state;
yy_last_accepting_cpos = yy_cp;
}
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
if ( yy_current_state >= 76 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
++yy_cp;
}
while ( yy_base[yy_current_state] != 282 );
yy_find_action:
yy_act = yy_accept[yy_current_state];
if ( yy_act == 0 )
{ /* have to back up */
yy_cp = yy_last_accepting_cpos;
yy_current_state = yy_last_accepting_state;
yy_act = yy_accept[yy_current_state];
}
YY_DO_BEFORE_ACTION;
do_action: /* This label is used only to access EOF actions. */
if ( yy_flex_debug )
{
if ( yy_act == 0 )
fprintf( stderr, "--scanner backing up\n" );
else if ( yy_act < 13 )
fprintf( stderr, "--accepting rule at line %d (\"%s\")\n",
yy_rule_linenum[yy_act], yytext );
else if ( yy_act == 13 )
fprintf( stderr, "--accepting default rule (\"%s\")\n",
yytext );
else if ( yy_act == 14 )
fprintf( stderr, "--(end of buffer or a NUL)\n" );
else
fprintf( stderr, "--EOF (start condition %d)\n", YY_START );
}
switch ( yy_act )
{ /* beginning of action switch */
case 0: /* must back up */
/* undo the effects of YY_DO_BEFORE_ACTION */
*yy_cp = yy_hold_char;
yy_cp = yy_last_accepting_cpos;
yy_current_state = yy_last_accepting_state;
goto yy_find_action;
case 1:
YY_RULE_SETUP
#line 69 "scripts/genksyms/lex.l"
return FILENAME;
YY_BREAK
case 2:
YY_RULE_SETUP
#line 70 "scripts/genksyms/lex.l"
cur_line++;
YY_BREAK
case 3:
YY_RULE_SETUP
#line 71 "scripts/genksyms/lex.l"
cur_line++;
YY_BREAK
/* Ignore all other whitespace. */
case 4:
YY_RULE_SETUP
#line 74 "scripts/genksyms/lex.l"
;
YY_BREAK
case 5:
YY_RULE_SETUP
#line 77 "scripts/genksyms/lex.l"
return STRING;
YY_BREAK
case 6:
YY_RULE_SETUP
#line 78 "scripts/genksyms/lex.l"
return CHAR;
YY_BREAK
case 7:
YY_RULE_SETUP
#line 79 "scripts/genksyms/lex.l"
return IDENT;
YY_BREAK
/* The Pedant requires that the other C multi-character tokens be
recognized as tokens. We don't actually use them since we don't
parse expressions, but we do want whitespace to be arranged
around them properly. */
case 8:
YY_RULE_SETUP
#line 85 "scripts/genksyms/lex.l"
return OTHER;
YY_BREAK
case 9:
YY_RULE_SETUP
#line 86 "scripts/genksyms/lex.l"
return INT;
YY_BREAK
case 10:
YY_RULE_SETUP
#line 87 "scripts/genksyms/lex.l"
return REAL;
YY_BREAK
case 11:
YY_RULE_SETUP
#line 89 "scripts/genksyms/lex.l"
return DOTS;
YY_BREAK
/* All other tokens are single characters. */
case 12:
YY_RULE_SETUP
#line 92 "scripts/genksyms/lex.l"
return yytext[0];
YY_BREAK
case 13:
YY_RULE_SETUP
#line 95 "scripts/genksyms/lex.l"
ECHO;
YY_BREAK
#line 840 "scripts/genksyms/lex.c"
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(V2_TOKENS):
yyterminate();
case YY_END_OF_BUFFER:
{
/* Amount of text matched not including the EOB char. */
int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
/* Undo the effects of YY_DO_BEFORE_ACTION. */
*yy_cp = yy_hold_char;
YY_RESTORE_YY_MORE_OFFSET
if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
{
/* We're scanning a new file or input source. It's
* possible that this happened because the user
* just pointed yyin at a new source and called
* yylex(). If so, then we have to assure
* consistency between yy_current_buffer and our
* globals. Here is the right place to do so, because
* this is the first action (other than possibly a
* back-up) that will match for the new input source.
*/
yy_n_chars = yy_current_buffer->yy_n_chars;
yy_current_buffer->yy_input_file = yyin;
yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
}
/* Note that here we test for yy_c_buf_p "<=" to the position
* of the first EOB in the buffer, since yy_c_buf_p will
* already have been incremented past the NUL character
* (since all states make transitions on EOB to the
* end-of-buffer state). Contrast this with the test
* in input().
*/
if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
{ /* This was really a NUL. */
yy_state_type yy_next_state;
yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
yy_current_state = yy_get_previous_state();
/* Okay, we're now positioned to make the NUL
* transition. We couldn't have
* yy_get_previous_state() go ahead and do it
* for us because it doesn't know how to deal
* with the possibility of jamming (and we don't
* want to build jamming into it because then it
* will run more slowly).
*/
yy_next_state = yy_try_NUL_trans( yy_current_state );
yy_bp = yytext_ptr + YY_MORE_ADJ;
if ( yy_next_state )
{
/* Consume the NUL. */
yy_cp = ++yy_c_buf_p;
yy_current_state = yy_next_state;
goto yy_match;
}
else
{
yy_cp = yy_c_buf_p;
goto yy_find_action;
}
}
else switch ( yy_get_next_buffer() )
{
case EOB_ACT_END_OF_FILE:
{
yy_did_buffer_switch_on_eof = 0;
if ( yywrap() )
{
/* Note: because we've taken care in
* yy_get_next_buffer() to have set up
* yytext, we can now set up
* yy_c_buf_p so that if some total
* hoser (like flex itself) wants to
* call the scanner after we return the
* YY_NULL, it'll still work - another
* YY_NULL will get returned.
*/
yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
yy_act = YY_STATE_EOF(YY_START);
goto do_action;
}
else
{
if ( ! yy_did_buffer_switch_on_eof )
YY_NEW_FILE;
}
break;
}
case EOB_ACT_CONTINUE_SCAN:
yy_c_buf_p =
yytext_ptr + yy_amount_of_matched_text;
yy_current_state = yy_get_previous_state();
yy_cp = yy_c_buf_p;
yy_bp = yytext_ptr + YY_MORE_ADJ;
goto yy_match;
case EOB_ACT_LAST_MATCH:
yy_c_buf_p =
&yy_current_buffer->yy_ch_buf[yy_n_chars];
yy_current_state = yy_get_previous_state();
yy_cp = yy_c_buf_p;
yy_bp = yytext_ptr + YY_MORE_ADJ;
goto yy_find_action;
}
break;
}
default:
YY_FATAL_ERROR(
"fatal flex scanner internal error--no action found" );
} /* end of action switch */
} /* end of scanning one token */
} /* end of yylex */
/* yy_get_next_buffer - try to read in a new buffer
*
* Returns a code representing an action:
* EOB_ACT_LAST_MATCH -
* EOB_ACT_CONTINUE_SCAN - continue scanning from current position
* EOB_ACT_END_OF_FILE - end of file
*/
static int yy_get_next_buffer()
{
register char *dest = yy_current_buffer->yy_ch_buf;
register char *source = yytext_ptr;
register int number_to_move, i;
int ret_val;
if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
YY_FATAL_ERROR(
"fatal flex scanner internal error--end of buffer missed" );
if ( yy_current_buffer->yy_fill_buffer == 0 )
{ /* Don't try to fill the buffer, so this is an EOF. */
if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
{
/* We matched a single character, the EOB, so
* treat this as a final EOF.
*/
return EOB_ACT_END_OF_FILE;
}
else
{
/* We matched some text prior to the EOB, first
* process it.
*/
return EOB_ACT_LAST_MATCH;
}
}
/* Try to read more data. */
/* First move last chars to start of buffer. */
number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
for ( i = 0; i < number_to_move; ++i )
*(dest++) = *(source++);
if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
/* don't do the read, it's not guaranteed to return an EOF,
* just force an EOF
*/
yy_current_buffer->yy_n_chars = yy_n_chars = 0;
else
{
int num_to_read =
yy_current_buffer->yy_buf_size - number_to_move - 1;
while ( num_to_read <= 0 )
{ /* Not enough room in the buffer - grow it. */
#ifdef YY_USES_REJECT
YY_FATAL_ERROR(
"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
#else
/* just a shorter name for the current buffer */
YY_BUFFER_STATE b = yy_current_buffer;
int yy_c_buf_p_offset =
(int) (yy_c_buf_p - b->yy_ch_buf);
if ( b->yy_is_our_buffer )
{
int new_size = b->yy_buf_size * 2;
if ( new_size <= 0 )
b->yy_buf_size += b->yy_buf_size / 8;
else
b->yy_buf_size *= 2;
b->yy_ch_buf = (char *)
/* Include room in for 2 EOB chars. */
yy_flex_realloc( (void *) b->yy_ch_buf,
b->yy_buf_size + 2 );
}
else
/* Can't grow it, we don't own it. */
b->yy_ch_buf = 0;
if ( ! b->yy_ch_buf )
YY_FATAL_ERROR(
"fatal error - scanner input buffer overflow" );
yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
num_to_read = yy_current_buffer->yy_buf_size -
number_to_move - 1;
#endif
}
if ( num_to_read > YY_READ_BUF_SIZE )
num_to_read = YY_READ_BUF_SIZE;
/* Read in more data. */
YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
yy_n_chars, num_to_read );
yy_current_buffer->yy_n_chars = yy_n_chars;
}
if ( yy_n_chars == 0 )
{
if ( number_to_move == YY_MORE_ADJ )
{
ret_val = EOB_ACT_END_OF_FILE;
yyrestart( yyin );
}
else
{
ret_val = EOB_ACT_LAST_MATCH;
yy_current_buffer->yy_buffer_status =
YY_BUFFER_EOF_PENDING;
}
}
else
ret_val = EOB_ACT_CONTINUE_SCAN;
yy_n_chars += number_to_move;
yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
return ret_val;
}
/* yy_get_previous_state - get the state just before the EOB char was reached */
static yy_state_type yy_get_previous_state()
{
register yy_state_type yy_current_state;
register char *yy_cp;
yy_current_state = yy_start;
yy_current_state += YY_AT_BOL();
for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
{
register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
if ( yy_accept[yy_current_state] )
{
yy_last_accepting_state = yy_current_state;
yy_last_accepting_cpos = yy_cp;
}
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
if ( yy_current_state >= 76 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
}
return yy_current_state;
}
/* yy_try_NUL_trans - try to make a transition on the NUL character
*
* synopsis
* next_state = yy_try_NUL_trans( current_state );
*/
#ifdef YY_USE_PROTOS
static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
#else
static yy_state_type yy_try_NUL_trans( yy_current_state )
yy_state_type yy_current_state;
#endif
{
register int yy_is_jam;
register char *yy_cp = yy_c_buf_p;
register YY_CHAR yy_c = 1;
if ( yy_accept[yy_current_state] )
{
yy_last_accepting_state = yy_current_state;
yy_last_accepting_cpos = yy_cp;
}
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
if ( yy_current_state >= 76 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
yy_is_jam = (yy_current_state == 75);
return yy_is_jam ? 0 : yy_current_state;
}
#ifndef YY_NO_UNPUT
#ifdef YY_USE_PROTOS
static void yyunput( int c, register char *yy_bp )
#else
static void yyunput( c, yy_bp )
int c;
register char *yy_bp;
#endif
{
register char *yy_cp = yy_c_buf_p;
/* undo effects of setting up yytext */
*yy_cp = yy_hold_char;
if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
{ /* need to shift things up to make room */
/* +2 for EOB chars. */
register int number_to_move = yy_n_chars + 2;
register char *dest = &yy_current_buffer->yy_ch_buf[
yy_current_buffer->yy_buf_size + 2];
register char *source =
&yy_current_buffer->yy_ch_buf[number_to_move];
while ( source > yy_current_buffer->yy_ch_buf )
*--dest = *--source;
yy_cp += (int) (dest - source);
yy_bp += (int) (dest - source);
yy_current_buffer->yy_n_chars =
yy_n_chars = yy_current_buffer->yy_buf_size;
if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
YY_FATAL_ERROR( "flex scanner push-back overflow" );
}
*--yy_cp = (char) c;
yytext_ptr = yy_bp;
yy_hold_char = *yy_cp;
yy_c_buf_p = yy_cp;
}
#endif /* ifndef YY_NO_UNPUT */
#ifdef __cplusplus
static int yyinput()
#else
static int input()
#endif
{
int c;
*yy_c_buf_p = yy_hold_char;
if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
{
/* yy_c_buf_p now points to the character we want to return.
* If this occurs *before* the EOB characters, then it's a
* valid NUL; if not, then we've hit the end of the buffer.
*/
if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
/* This was really a NUL. */
*yy_c_buf_p = '\0';
else
{ /* need more input */
int offset = yy_c_buf_p - yytext_ptr;
++yy_c_buf_p;
switch ( yy_get_next_buffer() )
{
case EOB_ACT_LAST_MATCH:
/* This happens because yy_g_n_b()
* sees that we've accumulated a
* token and flags that we need to
* try matching the token before
* proceeding. But for input(),
* there's no matching to consider.
* So convert the EOB_ACT_LAST_MATCH
* to EOB_ACT_END_OF_FILE.
*/
/* Reset buffer status. */
yyrestart( yyin );
/* fall through */
case EOB_ACT_END_OF_FILE:
{
if ( yywrap() )
return EOF;
if ( ! yy_did_buffer_switch_on_eof )
YY_NEW_FILE;
#ifdef __cplusplus
return yyinput();
#else
return input();
#endif
}
case EOB_ACT_CONTINUE_SCAN:
yy_c_buf_p = yytext_ptr + offset;
break;
}
}
}
c = *(unsigned char *) yy_c_buf_p; /* cast for 8-bit char's */
*yy_c_buf_p = '\0'; /* preserve yytext */
yy_hold_char = *++yy_c_buf_p;
yy_current_buffer->yy_at_bol = (c == '\n');
return c;
}
#ifdef YY_USE_PROTOS
void yyrestart( FILE *input_file )
#else
void yyrestart( input_file )
FILE *input_file;
#endif
{
if ( ! yy_current_buffer )
yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
yy_init_buffer( yy_current_buffer, input_file );
yy_load_buffer_state();
}
#ifdef YY_USE_PROTOS
void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
#else
void yy_switch_to_buffer( new_buffer )
YY_BUFFER_STATE new_buffer;
#endif
{
if ( yy_current_buffer == new_buffer )
return;
if ( yy_current_buffer )
{
/* Flush out information for old buffer. */
*yy_c_buf_p = yy_hold_char;
yy_current_buffer->yy_buf_pos = yy_c_buf_p;
yy_current_buffer->yy_n_chars = yy_n_chars;
}
yy_current_buffer = new_buffer;
yy_load_buffer_state();
/* We don't actually know whether we did this switch during
* EOF (yywrap()) processing, but the only time this flag
* is looked at is after yywrap() is called, so it's safe
* to go ahead and always set it.
*/
yy_did_buffer_switch_on_eof = 1;
}
#ifdef YY_USE_PROTOS
void yy_load_buffer_state( void )
#else
void yy_load_buffer_state()
#endif
{
yy_n_chars = yy_current_buffer->yy_n_chars;
yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
yyin = yy_current_buffer->yy_input_file;
yy_hold_char = *yy_c_buf_p;
}
#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
#else
YY_BUFFER_STATE yy_create_buffer( file, size )
FILE *file;
int size;
#endif
{
YY_BUFFER_STATE b;
b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
b->yy_buf_size = size;
/* yy_ch_buf has to be 2 characters longer than the size given because
* we need to put in 2 end-of-buffer characters.
*/
b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
if ( ! b->yy_ch_buf )
YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
b->yy_is_our_buffer = 1;
yy_init_buffer( b, file );
return b;
}
#ifdef YY_USE_PROTOS
void yy_delete_buffer( YY_BUFFER_STATE b )
#else
void yy_delete_buffer( b )
YY_BUFFER_STATE b;
#endif
{
if ( ! b )
return;
if ( b == yy_current_buffer )
yy_current_buffer = (YY_BUFFER_STATE) 0;
if ( b->yy_is_our_buffer )
yy_flex_free( (void *) b->yy_ch_buf );
yy_flex_free( (void *) b );
}
#ifdef YY_USE_PROTOS
void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
#else
void yy_init_buffer( b, file )
YY_BUFFER_STATE b;
FILE *file;
#endif
{
yy_flush_buffer( b );
b->yy_input_file = file;
b->yy_fill_buffer = 1;
#if YY_ALWAYS_INTERACTIVE
b->yy_is_interactive = 1;
#else
#if YY_NEVER_INTERACTIVE
b->yy_is_interactive = 0;
#else
b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
#endif
#endif
}
#ifdef YY_USE_PROTOS
void yy_flush_buffer( YY_BUFFER_STATE b )
#else
void yy_flush_buffer( b )
YY_BUFFER_STATE b;
#endif
{
if ( ! b )
return;
b->yy_n_chars = 0;
/* We always need two end-of-buffer characters. The first causes
* a transition to the end-of-buffer state. The second causes
* a jam in that state.
*/
b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
b->yy_buf_pos = &b->yy_ch_buf[0];
b->yy_at_bol = 1;
b->yy_buffer_status = YY_BUFFER_NEW;
if ( b == yy_current_buffer )
yy_load_buffer_state();
}
#ifndef YY_NO_SCAN_BUFFER
#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
#else
YY_BUFFER_STATE yy_scan_buffer( base, size )
char *base;
yy_size_t size;
#endif
{
YY_BUFFER_STATE b;
if ( size < 2 ||
base[size-2] != YY_END_OF_BUFFER_CHAR ||
base[size-1] != YY_END_OF_BUFFER_CHAR )
/* They forgot to leave room for the EOB's. */
return 0;
b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
b->yy_buf_pos = b->yy_ch_buf = base;
b->yy_is_our_buffer = 0;
b->yy_input_file = 0;
b->yy_n_chars = b->yy_buf_size;
b->yy_is_interactive = 0;
b->yy_at_bol = 1;
b->yy_fill_buffer = 0;
b->yy_buffer_status = YY_BUFFER_NEW;
yy_switch_to_buffer( b );
return b;
}
#endif
#ifndef YY_NO_SCAN_STRING
#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
#else
YY_BUFFER_STATE yy_scan_string( yy_str )
yyconst char *yy_str;
#endif
{
int len;
for ( len = 0; yy_str[len]; ++len )
;
return yy_scan_bytes( yy_str, len );
}
#endif
#ifndef YY_NO_SCAN_BYTES
#ifdef YY_USE_PROTOS
YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
#else
YY_BUFFER_STATE yy_scan_bytes( bytes, len )
yyconst char *bytes;
int len;
#endif
{
YY_BUFFER_STATE b;
char *buf;
yy_size_t n;
int i;
/* Get memory for full buffer, including space for trailing EOB's. */
n = len + 2;
buf = (char *) yy_flex_alloc( n );
if ( ! buf )
YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
for ( i = 0; i < len; ++i )
buf[i] = bytes[i];
buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
b = yy_scan_buffer( buf, n );
if ( ! b )
YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
/* It's okay to grow etc. this buffer, and we should throw it
* away when we're done.
*/
b->yy_is_our_buffer = 1;
return b;
}
#endif
#ifndef YY_NO_PUSH_STATE
#ifdef YY_USE_PROTOS
static void yy_push_state( int new_state )
#else
static void yy_push_state( new_state )
int new_state;
#endif
{
if ( yy_start_stack_ptr >= yy_start_stack_depth )
{
yy_size_t new_size;
yy_start_stack_depth += YY_START_STACK_INCR;
new_size = yy_start_stack_depth * sizeof( int );
if ( ! yy_start_stack )
yy_start_stack = (int *) yy_flex_alloc( new_size );
else
yy_start_stack = (int *) yy_flex_realloc(
(void *) yy_start_stack, new_size );
if ( ! yy_start_stack )
YY_FATAL_ERROR(
"out of memory expanding start-condition stack" );
}
yy_start_stack[yy_start_stack_ptr++] = YY_START;
BEGIN(new_state);
}
#endif
#ifndef YY_NO_POP_STATE
static void yy_pop_state()
{
if ( --yy_start_stack_ptr < 0 )
YY_FATAL_ERROR( "start-condition stack underflow" );
BEGIN(yy_start_stack[yy_start_stack_ptr]);
}
#endif
#ifndef YY_NO_TOP_STATE
static int yy_top_state()
{
return yy_start_stack[yy_start_stack_ptr - 1];
}
#endif
#ifndef YY_EXIT_FAILURE
#define YY_EXIT_FAILURE 2
#endif
#ifdef YY_USE_PROTOS
static void yy_fatal_error( yyconst char msg[] )
#else
static void yy_fatal_error( msg )
char msg[];
#endif
{
(void) fprintf( stderr, "%s\n", msg );
exit( YY_EXIT_FAILURE );
}
/* Redefine yyless() so it works in section 3 code. */
#undef yyless
#define yyless(n) \
do \
{ \
/* Undo effects of setting up yytext. */ \
yytext[yyleng] = yy_hold_char; \
yy_c_buf_p = yytext + n; \
yy_hold_char = *yy_c_buf_p; \
*yy_c_buf_p = '\0'; \
yyleng = n; \
} \
while ( 0 )
/* Internal utility routines. */
#ifndef yytext_ptr
#ifdef YY_USE_PROTOS
static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
#else
static void yy_flex_strncpy( s1, s2, n )
char *s1;
yyconst char *s2;
int n;
#endif
{
register int i;
for ( i = 0; i < n; ++i )
s1[i] = s2[i];
}
#endif
#ifdef YY_NEED_STRLEN
#ifdef YY_USE_PROTOS
static int yy_flex_strlen( yyconst char *s )
#else
static int yy_flex_strlen( s )
yyconst char *s;
#endif
{
register int n;
for ( n = 0; s[n]; ++n )
;
return n;
}
#endif
#ifdef YY_USE_PROTOS
static void *yy_flex_alloc( yy_size_t size )
#else
static void *yy_flex_alloc( size )
yy_size_t size;
#endif
{
return (void *) malloc( size );
}
#ifdef YY_USE_PROTOS
static void *yy_flex_realloc( void *ptr, yy_size_t size )
#else
static void *yy_flex_realloc( ptr, size )
void *ptr;
yy_size_t size;
#endif
{
/* The cast to (char *) in the following accommodates both
* implementations that use char* generic pointers, and those
* that use void* generic pointers. It works with the latter
* because both ANSI C and C++ allow castless assignment from
* any pointer type to void*, and deal with argument conversions
* as though doing an assignment.
*/
return (void *) realloc( (char *) ptr, size );
}
#ifdef YY_USE_PROTOS
static void yy_flex_free( void *ptr )
#else
static void yy_flex_free( ptr )
void *ptr;
#endif
{
free( ptr );
}
#if YY_MAIN
int main()
{
yylex();
return 0;
}
#endif
#line 95 "scripts/genksyms/lex.l"
/* Bring in the keyword recognizer. */
#include "keywords.c"
/* Macros to append to our phrase collection list. */
#define _APP(T,L) do { \
cur_node = next_node; \
next_node = xmalloc(sizeof(*next_node)); \
next_node->next = cur_node; \
cur_node->string = memcpy(xmalloc(L+1), T, L+1); \
cur_node->tag = SYM_NORMAL; \
} while (0)
#define APP _APP(yytext, yyleng)
/* The second stage lexer. Here we incorporate knowledge of the state
of the parser to tailor the tokens that are returned. */
int
yylex(void)
{
static enum {
ST_NOTSTARTED, ST_NORMAL, ST_ATTRIBUTE, ST_ASM, ST_BRACKET, ST_BRACE,
ST_EXPRESSION, ST_TABLE_1, ST_TABLE_2, ST_TABLE_3, ST_TABLE_4,
ST_TABLE_5, ST_TABLE_6
} lexstate = ST_NOTSTARTED;
static int suppress_type_lookup, dont_want_brace_phrase;
static struct string_list *next_node;
int token, count = 0;
struct string_list *cur_node;
if (lexstate == ST_NOTSTARTED)
{
BEGIN(V2_TOKENS);
next_node = xmalloc(sizeof(*next_node));
next_node->next = NULL;
lexstate = ST_NORMAL;
}
repeat:
token = yylex1();
if (token == 0)
return 0;
else if (token == FILENAME)
{
char *file, *e;
/* Save the filename and line number for later error messages. */
if (cur_filename)
free(cur_filename);
file = strchr(yytext, '\"')+1;
e = strchr(file, '\"');
*e = '\0';
cur_filename = memcpy(xmalloc(e-file+1), file, e-file+1);
cur_line = atoi(yytext+2);
goto repeat;
}
switch (lexstate)
{
case ST_NORMAL:
switch (token)
{
case IDENT:
APP;
{
const struct resword *r = is_reserved_word(yytext, yyleng);
if (r)
{
switch (token = r->token)
{
case ATTRIBUTE_KEYW:
lexstate = ST_ATTRIBUTE;
count = 0;
goto repeat;
case ASM_KEYW:
lexstate = ST_ASM;
count = 0;
goto repeat;
case STRUCT_KEYW:
case UNION_KEYW:
dont_want_brace_phrase = 3;
case ENUM_KEYW:
suppress_type_lookup = 2;
goto fini;
case EXPORT_SYMBOL_KEYW:
goto fini;
}
}
if (!suppress_type_lookup)
{
struct symbol *sym = find_symbol(yytext, SYM_TYPEDEF);
if (sym && sym->type == SYM_TYPEDEF)
token = TYPE;
}
}
break;
case '[':
APP;
lexstate = ST_BRACKET;
count = 1;
goto repeat;
case '{':
APP;
if (dont_want_brace_phrase)
break;
lexstate = ST_BRACE;
count = 1;
goto repeat;
case '=': case ':':
APP;
lexstate = ST_EXPRESSION;
break;
case DOTS:
default:
APP;
break;
}
break;
case ST_ATTRIBUTE:
APP;
switch (token)
{
case '(':
++count;
goto repeat;
case ')':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = ATTRIBUTE_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_ASM:
APP;
switch (token)
{
case '(':
++count;
goto repeat;
case ')':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = ASM_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_BRACKET:
APP;
switch (token)
{
case '[':
++count;
goto repeat;
case ']':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = BRACKET_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_BRACE:
APP;
switch (token)
{
case '{':
++count;
goto repeat;
case '}':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = BRACE_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_EXPRESSION:
switch (token)
{
case '(': case '[': case '{':
++count;
APP;
goto repeat;
case ')': case ']': case '}':
--count;
APP;
goto repeat;
case ',': case ';':
if (count == 0)
{
/* Put back the token we just read so's we can find it again
after registering the expression. */
unput(token);
lexstate = ST_NORMAL;
token = EXPRESSION_PHRASE;
break;
}
APP;
goto repeat;
default:
APP;
goto repeat;
}
break;
case ST_TABLE_1:
goto repeat;
case ST_TABLE_2:
if (token == IDENT && yyleng == 1 && yytext[0] == 'X')
{
token = EXPORT_SYMBOL_KEYW;
lexstate = ST_TABLE_5;
APP;
break;
}
lexstate = ST_TABLE_6;
/* FALLTHRU */
case ST_TABLE_6:
switch (token)
{
case '{': case '[': case '(':
++count;
break;
case '}': case ']': case ')':
--count;
break;
case ',':
if (count == 0)
lexstate = ST_TABLE_2;
break;
};
goto repeat;
case ST_TABLE_3:
goto repeat;
case ST_TABLE_4:
if (token == ';')
lexstate = ST_NORMAL;
goto repeat;
case ST_TABLE_5:
switch (token)
{
case ',':
token = ';';
lexstate = ST_TABLE_2;
APP;
break;
default:
APP;
break;
}
break;
default:
abort();
}
fini:
if (suppress_type_lookup > 0)
--suppress_type_lookup;
if (dont_want_brace_phrase > 0)
--dont_want_brace_phrase;
yylval = &next_node->next;
return token;
}
#ifndef YYSTYPE
#define YYSTYPE int
#endif
#define ASM_KEYW 257
#define ATTRIBUTE_KEYW 258
#define AUTO_KEYW 259
#define BOOL_KEYW 260
#define CHAR_KEYW 261
#define CONST_KEYW 262
#define DOUBLE_KEYW 263
#define ENUM_KEYW 264
#define EXTERN_KEYW 265
#define FLOAT_KEYW 266
#define INLINE_KEYW 267
#define INT_KEYW 268
#define LONG_KEYW 269
#define REGISTER_KEYW 270
#define RESTRICT_KEYW 271
#define SHORT_KEYW 272
#define SIGNED_KEYW 273
#define STATIC_KEYW 274
#define STRUCT_KEYW 275
#define TYPEDEF_KEYW 276
#define UNION_KEYW 277
#define UNSIGNED_KEYW 278
#define VOID_KEYW 279
#define VOLATILE_KEYW 280
#define TYPEOF_KEYW 281
#define EXPORT_SYMBOL_KEYW 282
#define ASM_PHRASE 283
#define ATTRIBUTE_PHRASE 284
#define BRACE_PHRASE 285
#define BRACKET_PHRASE 286
#define EXPRESSION_PHRASE 287
#define CHAR 288
#define DOTS 289
#define IDENT 290
#define INT 291
#define REAL 292
#define STRING 293
#define TYPE 294
#define OTHER 295
#define FILENAME 296
extern YYSTYPE yylval;
scripts/genksyms/lex.l 0 → 100644
View file @ 7e285bef
/* Lexical analysis for genksyms.
Copyright 1996, 1997 Linux International.
New implementation contributed by Richard Henderson <rth@tamu.edu>
Based on original work by Bjorn Ekwall <bj0rn@blox.se>
Taken from Linux modutils 2.4.22.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
%{
#include <limits.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
#include "genksyms.h"
#include "parse.h"
/* We've got a two-level lexer here. We let flex do basic tokenization
and then we categorize those basic tokens in the second stage. */
#define YY_DECL static int yylex1(void)
%}
IDENT [A-Za-z_][A-Za-z0-9_]*
O_INT 0[0-7]*
D_INT [1-9][0-9]*
X_INT 0[Xx][0-9A-Fa-f]+
I_SUF [Uu]|[Ll]|[Uu][Ll]|[Ll][Uu]
INT ({O_INT}|{D_INT}|{X_INT}){I_SUF}?
FRAC ([0-9]*\.[0-9]+)|([0-9]+\.)
EXP [Ee][+-]?[0-9]+
F_SUF [FfLl]
REAL ({FRAC}{EXP}?{F_SUF}?)|([0-9]+{EXP}{F_SUF}?)
STRING L?\"([^\\\"]*\\.)*[^\\\"]*\"
CHAR L?\'([^\\\']*\\.)*[^\\\']*\'
MC_TOKEN ([~%^&*+=|<>/-]=)|(&&)|("||")|(->)|(<<)|(>>)
/* Version 2 checksumming does proper tokenization; version 1 wasn't
quite so pedantic. */
%s V2_TOKENS
/* We don't do multiple input files. */
%option noyywrap
%%
/* Keep track of our location in the original source files. */
^#[ \t]+{INT}[ \t]+\"[^\"\n]+\".*\n return FILENAME;
^#.*\n cur_line++;
\n cur_line++;
/* Ignore all other whitespace. */
[ \t\f\v\r]+ ;
{STRING} return STRING;
{CHAR} return CHAR;
{IDENT} return IDENT;
/* The Pedant requires that the other C multi-character tokens be
recognized as tokens. We don't actually use them since we don't
parse expressions, but we do want whitespace to be arranged
around them properly. */
<V2_TOKENS>{MC_TOKEN} return OTHER;
<V2_TOKENS>{INT} return INT;
<V2_TOKENS>{REAL} return REAL;
"..." return DOTS;
/* All other tokens are single characters. */
. return yytext[0];
%%
/* Bring in the keyword recognizer. */
#include "keywords.c"
/* Macros to append to our phrase collection list. */
#define _APP(T,L) do { \
cur_node = next_node; \
next_node = xmalloc(sizeof(*next_node)); \
next_node->next = cur_node; \
cur_node->string = memcpy(xmalloc(L+1), T, L+1); \
cur_node->tag = SYM_NORMAL; \
} while (0)
#define APP _APP(yytext, yyleng)
/* The second stage lexer. Here we incorporate knowledge of the state
of the parser to tailor the tokens that are returned. */
int
yylex(void)
{
static enum {
ST_NOTSTARTED, ST_NORMAL, ST_ATTRIBUTE, ST_ASM, ST_BRACKET, ST_BRACE,
ST_EXPRESSION, ST_TABLE_1, ST_TABLE_2, ST_TABLE_3, ST_TABLE_4,
ST_TABLE_5, ST_TABLE_6
} lexstate = ST_NOTSTARTED;
static int suppress_type_lookup, dont_want_brace_phrase;
static struct string_list *next_node;
int token, count = 0;
struct string_list *cur_node;
if (lexstate == ST_NOTSTARTED)
{
BEGIN(V2_TOKENS);
next_node = xmalloc(sizeof(*next_node));
next_node->next = NULL;
lexstate = ST_NORMAL;
}
repeat:
token = yylex1();
if (token == 0)
return 0;
else if (token == FILENAME)
{
char *file, *e;
/* Save the filename and line number for later error messages. */
if (cur_filename)
free(cur_filename);
file = strchr(yytext, '\"')+1;
e = strchr(file, '\"');
*e = '\0';
cur_filename = memcpy(xmalloc(e-file+1), file, e-file+1);
cur_line = atoi(yytext+2);
goto repeat;
}
switch (lexstate)
{
case ST_NORMAL:
switch (token)
{
case IDENT:
APP;
{
const struct resword *r = is_reserved_word(yytext, yyleng);
if (r)
{
switch (token = r->token)
{
case ATTRIBUTE_KEYW:
lexstate = ST_ATTRIBUTE;
count = 0;
goto repeat;
case ASM_KEYW:
lexstate = ST_ASM;
count = 0;
goto repeat;
case STRUCT_KEYW:
case UNION_KEYW:
dont_want_brace_phrase = 3;
case ENUM_KEYW:
suppress_type_lookup = 2;
goto fini;
case EXPORT_SYMBOL_KEYW:
goto fini;
}
}
if (!suppress_type_lookup)
{
struct symbol *sym = find_symbol(yytext, SYM_TYPEDEF);
if (sym && sym->type == SYM_TYPEDEF)
token = TYPE;
}
}
break;
case '[':
APP;
lexstate = ST_BRACKET;
count = 1;
goto repeat;
case '{':
APP;
if (dont_want_brace_phrase)
break;
lexstate = ST_BRACE;
count = 1;
goto repeat;
case '=': case ':':
APP;
lexstate = ST_EXPRESSION;
break;
case DOTS:
default:
APP;
break;
}
break;
case ST_ATTRIBUTE:
APP;
switch (token)
{
case '(':
++count;
goto repeat;
case ')':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = ATTRIBUTE_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_ASM:
APP;
switch (token)
{
case '(':
++count;
goto repeat;
case ')':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = ASM_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_BRACKET:
APP;
switch (token)
{
case '[':
++count;
goto repeat;
case ']':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = BRACKET_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_BRACE:
APP;
switch (token)
{
case '{':
++count;
goto repeat;
case '}':
if (--count == 0)
{
lexstate = ST_NORMAL;
token = BRACE_PHRASE;
break;
}
goto repeat;
default:
goto repeat;
}
break;
case ST_EXPRESSION:
switch (token)
{
case '(': case '[': case '{':
++count;
APP;
goto repeat;
case ')': case ']': case '}':
--count;
APP;
goto repeat;
case ',': case ';':
if (count == 0)
{
/* Put back the token we just read so's we can find it again
after registering the expression. */
unput(token);
lexstate = ST_NORMAL;
token = EXPRESSION_PHRASE;
break;
}
APP;
goto repeat;
default:
APP;
goto repeat;
}
break;
case ST_TABLE_1:
goto repeat;
case ST_TABLE_2:
if (token == IDENT && yyleng == 1 && yytext[0] == 'X')
{
token = EXPORT_SYMBOL_KEYW;
lexstate = ST_TABLE_5;
APP;
break;
}
lexstate = ST_TABLE_6;
/* FALLTHRU */
case ST_TABLE_6:
switch (token)
{
case '{': case '[': case '(':
++count;
break;
case '}': case ']': case ')':
--count;
break;
case ',':
if (count == 0)
lexstate = ST_TABLE_2;
break;
};
goto repeat;
case ST_TABLE_3:
goto repeat;
case ST_TABLE_4:
if (token == ';')
lexstate = ST_NORMAL;
goto repeat;
case ST_TABLE_5:
switch (token)
{
case ',':
token = ';';
lexstate = ST_TABLE_2;
APP;
break;
default:
APP;
break;
}
break;
default:
abort();
}
fini:
if (suppress_type_lookup > 0)
--suppress_type_lookup;
if (dont_want_brace_phrase > 0)
--dont_want_brace_phrase;
yylval = &next_node->next;
return token;
}
scripts/genksyms/parse.c_shipped 0 → 100644
View file @ 7e285bef
/* A Bison parser, made from scripts/genksyms/parse.y
by GNU Bison version 1.28 */
#define YYBISON 1 /* Identify Bison output. */
#define ASM_KEYW 257
#define ATTRIBUTE_KEYW 258
#define AUTO_KEYW 259
#define BOOL_KEYW 260
#define CHAR_KEYW 261
#define CONST_KEYW 262
#define DOUBLE_KEYW 263
#define ENUM_KEYW 264
#define EXTERN_KEYW 265
#define FLOAT_KEYW 266
#define INLINE_KEYW 267
#define INT_KEYW 268
#define LONG_KEYW 269
#define REGISTER_KEYW 270
#define RESTRICT_KEYW 271
#define SHORT_KEYW 272
#define SIGNED_KEYW 273
#define STATIC_KEYW 274
#define STRUCT_KEYW 275
#define TYPEDEF_KEYW 276
#define UNION_KEYW 277
#define UNSIGNED_KEYW 278
#define VOID_KEYW 279
#define VOLATILE_KEYW 280
#define TYPEOF_KEYW 281
#define EXPORT_SYMBOL_KEYW 282
#define ASM_PHRASE 283
#define ATTRIBUTE_PHRASE 284
#define BRACE_PHRASE 285
#define BRACKET_PHRASE 286
#define EXPRESSION_PHRASE 287
#define CHAR 288
#define DOTS 289
#define IDENT 290
#define INT 291
#define REAL 292
#define STRING 293
#define TYPE 294
#define OTHER 295
#define FILENAME 296
#line 24 "scripts/genksyms/parse.y"
#include <assert.h>
#include <malloc.h>
#include "genksyms.h"
static int is_typedef;
static int is_extern;
static char *current_name;
static struct string_list *decl_spec;
static void yyerror(const char *);
static inline void
remove_node(struct string_list **p)
{
struct string_list *node = *p;
*p = node->next;
free_node(node);
}
static inline void
remove_list(struct string_list **pb, struct string_list **pe)
{
struct string_list *b = *pb, *e = *pe;
*pb = e;
free_list(b, e);
}
#ifndef YYSTYPE
#define YYSTYPE int
#endif
#ifndef YYDEBUG
#define YYDEBUG 1
#endif
#include <stdio.h>
#ifndef __cplusplus
#ifndef __STDC__
#define const
#endif
#endif
#define YYFINAL 172
#define YYFLAG -32768
#define YYNTBASE 52
#define YYTRANSLATE(x) ((unsigned)(x) <= 296 ? yytranslate[x] : 96)
static const char yytranslate[] = { 0,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 46,
47, 48, 2, 45, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 51, 43, 2,
49, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 50, 2, 44, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 2, 2, 2, 2, 1, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
37, 38, 39, 40, 41, 42
};
#if YYDEBUG != 0
static const short yyprhs[] = { 0,
0, 2, 5, 6, 9, 10, 14, 16, 18, 20,
22, 25, 28, 32, 33, 35, 37, 41, 46, 47,
49, 51, 54, 56, 58, 60, 62, 64, 66, 68,
70, 72, 77, 80, 83, 86, 90, 94, 98, 101,
104, 107, 109, 111, 113, 115, 117, 119, 121, 123,
125, 127, 129, 132, 133, 135, 137, 140, 142, 144,
146, 148, 151, 153, 155, 160, 165, 168, 172, 176,
179, 181, 183, 185, 190, 195, 198, 202, 206, 209,
211, 215, 216, 218, 220, 224, 227, 230, 232, 233,
235, 237, 242, 247, 250, 254, 258, 262, 263, 265,
268, 272, 276, 277, 279, 281, 284, 288, 291, 292,
294, 296, 300, 303, 306, 308, 311, 312, 314, 317,
318, 320
};
static const short yyrhs[] = { 53,
0, 52, 53, 0, 0, 54, 55, 0, 0, 22,
56, 57, 0, 57, 0, 81, 0, 93, 0, 95,
0, 1, 43, 0, 1, 44, 0, 61, 58, 43,
0, 0, 59, 0, 60, 0, 59, 45, 60, 0,
71, 94, 92, 82, 0, 0, 62, 0, 63, 0,
62, 63, 0, 64, 0, 65, 0, 5, 0, 16,
0, 20, 0, 11, 0, 13, 0, 66, 0, 70,
0, 27, 46, 65, 47, 0, 21, 36, 0, 23,
36, 0, 10, 36, 0, 21, 36, 84, 0, 23,
36, 84, 0, 10, 36, 31, 0, 10, 31, 0,
21, 84, 0, 23, 84, 0, 7, 0, 18, 0,
14, 0, 15, 0, 19, 0, 24, 0, 12, 0,
9, 0, 25, 0, 6, 0, 40, 0, 48, 68,
0, 0, 69, 0, 70, 0, 69, 70, 0, 8,
0, 26, 0, 30, 0, 17, 0, 67, 71, 0,
72, 0, 36, 0, 72, 46, 75, 47, 0, 72,
46, 1, 47, 0, 72, 32, 0, 46, 71, 47,
0, 46, 1, 47, 0, 67, 73, 0, 74, 0,
36, 0, 40, 0, 74, 46, 75, 47, 0, 74,
46, 1, 47, 0, 74, 32, 0, 46, 73, 47,
0, 46, 1, 47, 0, 76, 35, 0, 76, 0,
77, 45, 35, 0, 0, 77, 0, 78, 0, 77,
45, 78, 0, 62, 79, 0, 67, 79, 0, 80,
0, 0, 36, 0, 40, 0, 80, 46, 75, 47,
0, 80, 46, 1, 47, 0, 80, 32, 0, 46,
79, 47, 0, 46, 1, 47, 0, 61, 71, 31,
0, 0, 83, 0, 49, 33, 0, 50, 85, 44,
0, 50, 1, 44, 0, 0, 86, 0, 87, 0,
86, 87, 0, 61, 88, 43, 0, 1, 43, 0,
0, 89, 0, 90, 0, 89, 45, 90, 0, 73,
92, 0, 36, 91, 0, 91, 0, 51, 33, 0,
0, 30, 0, 29, 43, 0, 0, 29, 0, 28,
46, 36, 47, 43, 0
};
#endif
#if YYDEBUG != 0
static const short yyrline[] = { 0,
101, 103, 106, 109, 112, 114, 115, 116, 117, 118,
119, 120, 123, 137, 139, 142, 151, 163, 169, 171,
174, 176, 179, 186, 189, 191, 192, 193, 194, 197,
199, 200, 204, 206, 208, 212, 219, 226, 235, 236,
237, 240, 242, 243, 244, 245, 246, 247, 248, 249,
250, 251, 254, 259, 261, 264, 266, 269, 270, 270,
271, 278, 280, 283, 293, 295, 297, 299, 301, 307,
309, 312, 314, 315, 317, 319, 321, 323, 327, 329,
330, 333, 335, 338, 340, 344, 349, 352, 355, 357,
365, 369, 371, 373, 375, 377, 381, 390, 392, 396,
401, 403, 406, 408, 411, 413, 416, 419, 423, 425,
428, 430, 433, 435, 436, 439, 443, 445, 448, 452,
454, 457
};
#endif
#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
static const char * const yytname[] = { "$","error","$undefined.","ASM_KEYW",
"ATTRIBUTE_KEYW","AUTO_KEYW","BOOL_KEYW","CHAR_KEYW","CONST_KEYW","DOUBLE_KEYW",
"ENUM_KEYW","EXTERN_KEYW","FLOAT_KEYW","INLINE_KEYW","INT_KEYW","LONG_KEYW",
"REGISTER_KEYW","RESTRICT_KEYW","SHORT_KEYW","SIGNED_KEYW","STATIC_KEYW","STRUCT_KEYW",
"TYPEDEF_KEYW","UNION_KEYW","UNSIGNED_KEYW","VOID_KEYW","VOLATILE_KEYW","TYPEOF_KEYW",
"EXPORT_SYMBOL_KEYW","ASM_PHRASE","ATTRIBUTE_PHRASE","BRACE_PHRASE","BRACKET_PHRASE",
"EXPRESSION_PHRASE","CHAR","DOTS","IDENT","INT","REAL","STRING","TYPE","OTHER",
"FILENAME","';'","'}'","','","'('","')'","'*'","'='","'{'","':'","declaration_seq",
"declaration","@1","declaration1","@2","simple_declaration","init_declarator_list_opt",
"init_declarator_list","init_declarator","decl_specifier_seq_opt","decl_specifier_seq",
"decl_specifier","storage_class_specifier","type_specifier","simple_type_specifier",
"ptr_operator","cvar_qualifier_seq_opt","cvar_qualifier_seq","cvar_qualifier",
"declarator","direct_declarator","nested_declarator","direct_nested_declarator",
"parameter_declaration_clause","parameter_declaration_list_opt","parameter_declaration_list",
"parameter_declaration","m_abstract_declarator","direct_m_abstract_declarator",
"function_definition","initializer_opt","initializer","class_body","member_specification_opt",
"member_specification","member_declaration","member_declarator_list_opt","member_declarator_list",
"member_declarator","member_bitfield_declarator","attribute_opt","asm_definition",
"asm_phrase_opt","export_definition", NULL
};
#endif
static const short yyr1[] = { 0,
52, 52, 54, 53, 56, 55, 55, 55, 55, 55,
55, 55, 57, 58, 58, 59, 59, 60, 61, 61,
62, 62, 63, 63, 64, 64, 64, 64, 64, 65,
65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
65, 66, 66, 66, 66, 66, 66, 66, 66, 66,
66, 66, 67, 68, 68, 69, 69, 70, 70, 70,
70, 71, 71, 72, 72, 72, 72, 72, 72, 73,
73, 74, 74, 74, 74, 74, 74, 74, 75, 75,
75, 76, 76, 77, 77, 78, 79, 79, 80, 80,
80, 80, 80, 80, 80, 80, 81, 82, 82, 83,
84, 84, 85, 85, 86, 86, 87, 87, 88, 88,
89, 89, 90, 90, 90, 91, 92, 92, 93, 94,
94, 95
};
static const short yyr2[] = { 0,
1, 2, 0, 2, 0, 3, 1, 1, 1, 1,
2, 2, 3, 0, 1, 1, 3, 4, 0, 1,
1, 2, 1, 1, 1, 1, 1, 1, 1, 1,
1, 4, 2, 2, 2, 3, 3, 3, 2, 2,
2, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 2, 0, 1, 1, 2, 1, 1, 1,
1, 2, 1, 1, 4, 4, 2, 3, 3, 2,
1, 1, 1, 4, 4, 2, 3, 3, 2, 1,
3, 0, 1, 1, 3, 2, 2, 1, 0, 1,
1, 4, 4, 2, 3, 3, 3, 0, 1, 2,
3, 3, 0, 1, 1, 2, 3, 2, 0, 1,
1, 3, 2, 2, 1, 2, 0, 1, 2, 0,
1, 5
};
static const short yydefact[] = { 3,
3, 1, 0, 2, 0, 25, 51, 42, 58, 49,
0, 28, 48, 29, 44, 45, 26, 61, 43, 46,
27, 0, 5, 0, 47, 50, 59, 0, 0, 0,
60, 52, 4, 7, 14, 20, 21, 23, 24, 30,
31, 8, 9, 10, 11, 12, 39, 35, 33, 0,
40, 19, 34, 41, 0, 0, 119, 64, 0, 54,
0, 15, 16, 0, 120, 63, 22, 38, 36, 0,
109, 0, 0, 105, 6, 14, 37, 0, 0, 0,
0, 53, 55, 56, 13, 0, 62, 121, 97, 117,
67, 0, 108, 102, 72, 73, 0, 0, 0, 117,
71, 0, 110, 111, 115, 101, 0, 106, 120, 32,
0, 69, 68, 57, 17, 118, 98, 0, 89, 0,
80, 83, 84, 114, 0, 72, 0, 116, 70, 113,
76, 0, 107, 0, 122, 0, 18, 99, 66, 90,
52, 0, 89, 86, 88, 65, 79, 0, 78, 77,
0, 0, 112, 100, 0, 91, 0, 87, 94, 0,
81, 85, 75, 74, 96, 95, 0, 0, 93, 92,
0, 0
};
static const short yydefgoto[] = { 1,
2, 3, 33, 52, 34, 61, 62, 63, 71, 36,
37, 38, 39, 40, 64, 82, 83, 41, 109, 66,
100, 101, 120, 121, 122, 123, 144, 145, 42, 137,
138, 51, 72, 73, 74, 102, 103, 104, 105, 117,
43, 90, 44
};
static const short yypact[] = {-32768,
19,-32768, 175,-32768, 32,-32768,-32768,-32768,-32768,-32768,
-18,-32768,-32768,-32768,-32768,-32768,-32768,-32768,-32768,-32768,
-32768, -30,-32768, -26,-32768,-32768,-32768, -32, -10, -2,
-32768,-32768,-32768,-32768, 2, 428,-32768,-32768,-32768,-32768,
-32768,-32768,-32768,-32768,-32768,-32768,-32768, 34, 12, 79,
-32768, 428, 12,-32768, 455, 33,-32768,-32768, 15, 14,
35, 29,-32768, 2, -14, -21,-32768,-32768,-32768, 67,
31, 37, 127,-32768,-32768, 2,-32768, 54, 60, 66,
69,-32768, 14,-32768,-32768, 2,-32768,-32768,-32768, 84,
-32768, 219,-32768,-32768, 70,-32768, 20, 91, 72, 84,
-20, 74, 81,-32768,-32768,-32768, 86,-32768, 102,-32768,
106,-32768,-32768,-32768,-32768,-32768, 109, 108, 348, 112,
126, 117,-32768,-32768, 118,-32768, 122,-32768,-32768,-32768,
-32768, 262,-32768, 31,-32768, 131,-32768,-32768,-32768,-32768,
-32768, 7, 120,-32768, -9,-32768,-32768, 392,-32768,-32768,
125, 130,-32768,-32768, 132,-32768, 159,-32768,-32768, 305,
-32768,-32768,-32768,-32768,-32768,-32768, 160, 161,-32768,-32768,
174,-32768
};
static const short yypgoto[] = {-32768,
208,-32768,-32768,-32768, 158,-32768,-32768, 128, 0, -90,
-36,-32768, 157,-32768, -70,-32768,-32768, -51, -31,-32768,
-40,-32768, -125,-32768,-32768, 65, -97,-32768,-32768,-32768,
-32768, -19,-32768,-32768, 143,-32768,-32768, 83, 124, 141,
-32768,-32768,-32768
};
#define YYLAST 495
static const short yytable[] = { 67,
99, 119, 35, 65, 54, 49, 152, 155, 84, 53,
91, 131, 47, 55, 88, 80, 89, 48, 171, 50,
125, 9, 159, 50, 92, 132, 99, 81, 99, 69,
18, 114, 87, 77, 168, 56, 160, 58, -89, 27,
57, 119, 140, 31, 157, 158, 156, 59, 143, 60,
58, 76, 142, -89, 60, 126, 127, 119, 129, 96,
59, 50, 60, 99, 68, 97, 95, 60, 79, 119,
96, 143, 143, 86, 45, 46, 97, 85, 60, 70,
106, 98, 67, 6, 7, 8, 9, 10, 11, 12,
13, 14, 15, 16, 17, 18, 19, 20, 21, 22,
110, 24, 25, 26, 27, 28, 111, 126, 31, 93,
94, 96, 112, 116, -19, 113, 133, 97, 32, 60,
98, -19, -103, 128, -19, 134, -19, 107, 93, -19,
88, 6, 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20, 21, 22, 135, 24,
25, 26, 27, 28, 139, 140, 31, 136, 146, 156,
147, 148, -19, 154, 149, 142, 32, 60, 150, -19,
-104, 163, -19, 172, -19, 5, 164, -19, 165, 6,
7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
27, 28, 29, 30, 31, 166, 169, 170, 4, 75,
-19, 78, 162, 115, 32, 108, 153, -19, 124, 118,
-19, 0, -19, 6, 7, 8, 9, 10, 11, 12,
13, 14, 15, 16, 17, 18, 19, 20, 21, 22,
130, 24, 25, 26, 27, 28, 0, 0, 31, 0,
0, 0, 0, -82, 0, 0, 0, 0, 32, 0,
0, 0, 151, 0, 0, -82, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 0, 24, 25, 26, 27, 28, 0,
0, 31, 0, 0, 0, 0, -82, 0, 0, 0,
0, 32, 0, 0, 0, 167, 0, 0, -82, 6,
7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 0, 24, 25, 26,
27, 28, 0, 0, 31, 0, 0, 0, 0, -82,
0, 0, 0, 0, 32, 0, 0, 0, 0, 0,
0, -82, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 0,
24, 25, 26, 27, 28, 0, 0, 31, 0, 0,
0, 0, 0, 140, 0, 0, 0, 141, 0, 0,
0, 0, 0, 142, 0, 60, 6, 7, 8, 9,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 0, 24, 25, 26, 27, 28, 0,
0, 31, 0, 0, 0, 0, 161, 0, 0, 0,
0, 32, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 0,
24, 25, 26, 27, 28, 0, 0, 31, 0, 0,
7, 8, 9, 10, 11, 0, 13, 32, 15, 16,
0, 18, 19, 20, 0, 22, 0, 24, 25, 26,
27, 28, 0, 0, 31, 0, 0, 0, 0, 0,
0, 0, 0, 0, 32
};
static const short yycheck[] = { 36,
71, 92, 3, 35, 24, 36, 132, 1, 60, 36,
32, 32, 31, 46, 29, 1, 31, 36, 0, 50,
1, 8, 32, 50, 46, 46, 97, 59, 99, 49,
17, 83, 64, 53, 160, 46, 46, 36, 32, 26,
43, 132, 36, 30, 142, 143, 40, 46, 119, 48,
36, 52, 46, 47, 48, 36, 97, 148, 99, 40,
46, 50, 48, 134, 31, 46, 36, 48, 36, 160,
40, 142, 143, 45, 43, 44, 46, 43, 48, 1,
44, 51, 119, 5, 6, 7, 8, 9, 10, 11,
12, 13, 14, 15, 16, 17, 18, 19, 20, 21,
47, 23, 24, 25, 26, 27, 47, 36, 30, 43,
44, 40, 47, 30, 36, 47, 43, 46, 40, 48,
51, 43, 44, 33, 46, 45, 48, 1, 43, 51,
29, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 43, 23,
24, 25, 26, 27, 47, 36, 30, 49, 47, 40,
35, 45, 36, 33, 47, 46, 40, 48, 47, 43,
44, 47, 46, 0, 48, 1, 47, 51, 47, 5,
6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 47, 47, 47, 1, 52,
36, 55, 148, 86, 40, 73, 134, 43, 95, 1,
46, -1, 48, 5, 6, 7, 8, 9, 10, 11,
12, 13, 14, 15, 16, 17, 18, 19, 20, 21,
100, 23, 24, 25, 26, 27, -1, -1, 30, -1,
-1, -1, -1, 35, -1, -1, -1, -1, 40, -1,
-1, -1, 1, -1, -1, 47, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14, 15, 16, 17, 18,
19, 20, 21, -1, 23, 24, 25, 26, 27, -1,
-1, 30, -1, -1, -1, -1, 35, -1, -1, -1,
-1, 40, -1, -1, -1, 1, -1, -1, 47, 5,
6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, -1, 23, 24, 25,
26, 27, -1, -1, 30, -1, -1, -1, -1, 35,
-1, -1, -1, -1, 40, -1, -1, -1, -1, -1,
-1, 47, 5, 6, 7, 8, 9, 10, 11, 12,
13, 14, 15, 16, 17, 18, 19, 20, 21, -1,
23, 24, 25, 26, 27, -1, -1, 30, -1, -1,
-1, -1, -1, 36, -1, -1, -1, 40, -1, -1,
-1, -1, -1, 46, -1, 48, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14, 15, 16, 17, 18,
19, 20, 21, -1, 23, 24, 25, 26, 27, -1,
-1, 30, -1, -1, -1, -1, 35, -1, -1, -1,
-1, 40, 5, 6, 7, 8, 9, 10, 11, 12,
13, 14, 15, 16, 17, 18, 19, 20, 21, -1,
23, 24, 25, 26, 27, -1, -1, 30, -1, -1,
6, 7, 8, 9, 10, -1, 12, 40, 14, 15,
-1, 17, 18, 19, -1, 21, -1, 23, 24, 25,
26, 27, -1, -1, 30, -1, -1, -1, -1, -1,
-1, -1, -1, -1, 40
};
/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
#line 3 "/usr/lib/bison.simple"
/* This file comes from bison-1.28. */
/* Skeleton output parser for bison,
Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* As a special exception, when this file is copied by Bison into a
Bison output file, you may use that output file without restriction.
This special exception was added by the Free Software Foundation
in version 1.24 of Bison. */
/* This is the parser code that is written into each bison parser
when the %semantic_parser declaration is not specified in the grammar.
It was written by Richard Stallman by simplifying the hairy parser
used when %semantic_parser is specified. */
#ifndef YYSTACK_USE_ALLOCA
#ifdef alloca
#define YYSTACK_USE_ALLOCA
#else /* alloca not defined */
#ifdef __GNUC__
#define YYSTACK_USE_ALLOCA
#define alloca __builtin_alloca
#else /* not GNU C. */
#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
#define YYSTACK_USE_ALLOCA
#include <alloca.h>
#else /* not sparc */
/* We think this test detects Watcom and Microsoft C. */
/* This used to test MSDOS, but that is a bad idea
since that symbol is in the user namespace. */
#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
#if 0 /* No need for malloc.h, which pollutes the namespace;
instead, just don't use alloca. */
#include <malloc.h>
#endif
#else /* not MSDOS, or __TURBOC__ */
#if defined(_AIX)
/* I don't know what this was needed for, but it pollutes the namespace.
So I turned it off. rms, 2 May 1997. */
/* #include <malloc.h> */
#pragma alloca
#define YYSTACK_USE_ALLOCA
#else /* not MSDOS, or __TURBOC__, or _AIX */
#if 0
#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
and on HPUX 10. Eventually we can turn this on. */
#define YYSTACK_USE_ALLOCA
#define alloca __builtin_alloca
#endif /* __hpux */
#endif
#endif /* not _AIX */
#endif /* not MSDOS, or __TURBOC__ */
#endif /* not sparc */
#endif /* not GNU C */
#endif /* alloca not defined */
#endif /* YYSTACK_USE_ALLOCA not defined */
#ifdef YYSTACK_USE_ALLOCA
#define YYSTACK_ALLOC alloca
#else
#define YYSTACK_ALLOC malloc
#endif
/* Note: there must be only one dollar sign in this file.
It is replaced by the list of actions, each action
as one case of the switch. */
#define yyerrok (yyerrstatus = 0)
#define yyclearin (yychar = YYEMPTY)
#define YYEMPTY -2
#define YYEOF 0
#define YYACCEPT goto yyacceptlab
#define YYABORT goto yyabortlab
#define YYERROR goto yyerrlab1
/* Like YYERROR except do call yyerror.
This remains here temporarily to ease the
transition to the new meaning of YYERROR, for GCC.
Once GCC version 2 has supplanted version 1, this can go. */
#define YYFAIL goto yyerrlab
#define YYRECOVERING() (!!yyerrstatus)
#define YYBACKUP(token, value) \
do \
if (yychar == YYEMPTY && yylen == 1) \
{ yychar = (token), yylval = (value); \
yychar1 = YYTRANSLATE (yychar); \
YYPOPSTACK; \
goto yybackup; \
} \
else \
{ yyerror ("syntax error: cannot back up"); YYERROR; } \
while (0)
#define YYTERROR 1
#define YYERRCODE 256
#ifndef YYPURE
#define YYLEX yylex()
#endif
#ifdef YYPURE
#ifdef YYLSP_NEEDED
#ifdef YYLEX_PARAM
#define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM)
#else
#define YYLEX yylex(&yylval, &yylloc)
#endif
#else /* not YYLSP_NEEDED */
#ifdef YYLEX_PARAM
#define YYLEX yylex(&yylval, YYLEX_PARAM)
#else
#define YYLEX yylex(&yylval)
#endif
#endif /* not YYLSP_NEEDED */
#endif
/* If nonreentrant, generate the variables here */
#ifndef YYPURE
int yychar; /* the lookahead symbol */
YYSTYPE yylval; /* the semantic value of the */
/* lookahead symbol */
#ifdef YYLSP_NEEDED
YYLTYPE yylloc; /* location data for the lookahead */
/* symbol */
#endif
int yynerrs; /* number of parse errors so far */
#endif /* not YYPURE */
#if YYDEBUG != 0
int yydebug; /* nonzero means print parse trace */
/* Since this is uninitialized, it does not stop multiple parsers
from coexisting. */
#endif
/* YYINITDEPTH indicates the initial size of the parser's stacks */
#ifndef YYINITDEPTH
#define YYINITDEPTH 200
#endif
/* YYMAXDEPTH is the maximum size the stacks can grow to
(effective only if the built-in stack extension method is used). */
#if YYMAXDEPTH == 0
#undef YYMAXDEPTH
#endif
#ifndef YYMAXDEPTH
#define YYMAXDEPTH 10000
#endif
/* Define __yy_memcpy. Note that the size argument
should be passed with type unsigned int, because that is what the non-GCC
definitions require. With GCC, __builtin_memcpy takes an arg
of type size_t, but it can handle unsigned int. */
#if __GNUC__ > 1 /* GNU C and GNU C++ define this. */
#define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT)
#else /* not GNU C or C++ */
#ifndef __cplusplus
/* This is the most reliable way to avoid incompatibilities
in available built-in functions on various systems. */
static void
__yy_memcpy (to, from, count)
char *to;
char *from;
unsigned int count;
{
register char *f = from;
register char *t = to;
register int i = count;
while (i-- > 0)
*t++ = *f++;
}
#else /* __cplusplus */
/* This is the most reliable way to avoid incompatibilities
in available built-in functions on various systems. */
static void
__yy_memcpy (char *to, char *from, unsigned int count)
{
register char *t = to;
register char *f = from;
register int i = count;
while (i-- > 0)
*t++ = *f++;
}
#endif
#endif
#line 217 "/usr/lib/bison.simple"
/* The user can define YYPARSE_PARAM as the name of an argument to be passed
into yyparse. The argument should have type void *.
It should actually point to an object.
Grammar actions can access the variable by casting it
to the proper pointer type. */
#ifdef YYPARSE_PARAM
#ifdef __cplusplus
#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
#define YYPARSE_PARAM_DECL
#else /* not __cplusplus */
#define YYPARSE_PARAM_ARG YYPARSE_PARAM
#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
#endif /* not __cplusplus */
#else /* not YYPARSE_PARAM */
#define YYPARSE_PARAM_ARG
#define YYPARSE_PARAM_DECL
#endif /* not YYPARSE_PARAM */
/* Prevent warning if -Wstrict-prototypes. */
#ifdef __GNUC__
#ifdef YYPARSE_PARAM
int yyparse (void *);
#else
int yyparse (void);
#endif
#endif
int
yyparse(YYPARSE_PARAM_ARG)
YYPARSE_PARAM_DECL
{
register int yystate;
register int yyn;
register short *yyssp;
register YYSTYPE *yyvsp;
int yyerrstatus; /* number of tokens to shift before error messages enabled */
int yychar1 = 0; /* lookahead token as an internal (translated) token number */
short yyssa[YYINITDEPTH]; /* the state stack */
YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */
short *yyss = yyssa; /* refer to the stacks thru separate pointers */
YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */
#ifdef YYLSP_NEEDED
YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */
YYLTYPE *yyls = yylsa;
YYLTYPE *yylsp;
#define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
#else
#define YYPOPSTACK (yyvsp--, yyssp--)
#endif
int yystacksize = YYINITDEPTH;
int yyfree_stacks = 0;
#ifdef YYPURE
int yychar;
YYSTYPE yylval;
int yynerrs;
#ifdef YYLSP_NEEDED
YYLTYPE yylloc;
#endif
#endif
YYSTYPE yyval; /* the variable used to return */
/* semantic values from the action */
/* routines */
int yylen;
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Starting parse\n");
#endif
yystate = 0;
yyerrstatus = 0;
yynerrs = 0;
yychar = YYEMPTY; /* Cause a token to be read. */
/* Initialize stack pointers.
Waste one element of value and location stack
so that they stay on the same level as the state stack.
The wasted elements are never initialized. */
yyssp = yyss - 1;
yyvsp = yyvs;
#ifdef YYLSP_NEEDED
yylsp = yyls;
#endif
/* Push a new state, which is found in yystate . */
/* In all cases, when you get here, the value and location stacks
have just been pushed. so pushing a state here evens the stacks. */
yynewstate:
*++yyssp = yystate;
if (yyssp >= yyss + yystacksize - 1)
{
/* Give user a chance to reallocate the stack */
/* Use copies of these so that the &'s don't force the real ones into memory. */
YYSTYPE *yyvs1 = yyvs;
short *yyss1 = yyss;
#ifdef YYLSP_NEEDED
YYLTYPE *yyls1 = yyls;
#endif
/* Get the current used size of the three stacks, in elements. */
int size = yyssp - yyss + 1;
#ifdef yyoverflow
/* Each stack pointer address is followed by the size of
the data in use in that stack, in bytes. */
#ifdef YYLSP_NEEDED
/* This used to be a conditional around just the two extra args,
but that might be undefined if yyoverflow is a macro. */
yyoverflow("parser stack overflow",
&yyss1, size * sizeof (*yyssp),
&yyvs1, size * sizeof (*yyvsp),
&yyls1, size * sizeof (*yylsp),
&yystacksize);
#else
yyoverflow("parser stack overflow",
&yyss1, size * sizeof (*yyssp),
&yyvs1, size * sizeof (*yyvsp),
&yystacksize);
#endif
yyss = yyss1; yyvs = yyvs1;
#ifdef YYLSP_NEEDED
yyls = yyls1;
#endif
#else /* no yyoverflow */
/* Extend the stack our own way. */
if (yystacksize >= YYMAXDEPTH)
{
yyerror("parser stack overflow");
if (yyfree_stacks)
{
free (yyss);
free (yyvs);
#ifdef YYLSP_NEEDED
free (yyls);
#endif
}
return 2;
}
yystacksize *= 2;
if (yystacksize > YYMAXDEPTH)
yystacksize = YYMAXDEPTH;
#ifndef YYSTACK_USE_ALLOCA
yyfree_stacks = 1;
#endif
yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
__yy_memcpy ((char *)yyss, (char *)yyss1,
size * (unsigned int) sizeof (*yyssp));
yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
__yy_memcpy ((char *)yyvs, (char *)yyvs1,
size * (unsigned int) sizeof (*yyvsp));
#ifdef YYLSP_NEEDED
yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
__yy_memcpy ((char *)yyls, (char *)yyls1,
size * (unsigned int) sizeof (*yylsp));
#endif
#endif /* no yyoverflow */
yyssp = yyss + size - 1;
yyvsp = yyvs + size - 1;
#ifdef YYLSP_NEEDED
yylsp = yyls + size - 1;
#endif
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Stack size increased to %d\n", yystacksize);
#endif
if (yyssp >= yyss + yystacksize - 1)
YYABORT;
}
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Entering state %d\n", yystate);
#endif
goto yybackup;
yybackup:
/* Do appropriate processing given the current state. */
/* Read a lookahead token if we need one and don't already have one. */
/* yyresume: */
/* First try to decide what to do without reference to lookahead token. */
yyn = yypact[yystate];
if (yyn == YYFLAG)
goto yydefault;
/* Not known => get a lookahead token if don't already have one. */
/* yychar is either YYEMPTY or YYEOF
or a valid token in external form. */
if (yychar == YYEMPTY)
{
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Reading a token: ");
#endif
yychar = YYLEX;
}
/* Convert token to internal form (in yychar1) for indexing tables with */
if (yychar <= 0) /* This means end of input. */
{
yychar1 = 0;
yychar = YYEOF; /* Don't call YYLEX any more */
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Now at end of input.\n");
#endif
}
else
{
yychar1 = YYTRANSLATE(yychar);
#if YYDEBUG != 0
if (yydebug)
{
fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
/* Give the individual parser a way to print the precise meaning
of a token, for further debugging info. */
#ifdef YYPRINT
YYPRINT (stderr, yychar, yylval);
#endif
fprintf (stderr, ")\n");
}
#endif
}
yyn += yychar1;
if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
goto yydefault;
yyn = yytable[yyn];
/* yyn is what to do for this token type in this state.
Negative => reduce, -yyn is rule number.
Positive => shift, yyn is new state.
New state is final state => don't bother to shift,
just return success.
0, or most negative number => error. */
if (yyn < 0)
{
if (yyn == YYFLAG)
goto yyerrlab;
yyn = -yyn;
goto yyreduce;
}
else if (yyn == 0)
goto yyerrlab;
if (yyn == YYFINAL)
YYACCEPT;
/* Shift the lookahead token. */
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
#endif
/* Discard the token being shifted unless it is eof. */
if (yychar != YYEOF)
yychar = YYEMPTY;
*++yyvsp = yylval;
#ifdef YYLSP_NEEDED
*++yylsp = yylloc;
#endif
/* count tokens shifted since error; after three, turn off error status. */
if (yyerrstatus) yyerrstatus--;
yystate = yyn;
goto yynewstate;
/* Do the default action for the current state. */
yydefault:
yyn = yydefact[yystate];
if (yyn == 0)
goto yyerrlab;
/* Do a reduction. yyn is the number of a rule to reduce with. */
yyreduce:
yylen = yyr2[yyn];
if (yylen > 0)
yyval = yyvsp[1-yylen]; /* implement default value of the action */
#if YYDEBUG != 0
if (yydebug)
{
int i;
fprintf (stderr, "Reducing via rule %d (line %d), ",
yyn, yyrline[yyn]);
/* Print the symbols being reduced, and their result. */
for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
fprintf (stderr, "%s ", yytname[yyrhs[i]]);
fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
}
#endif
switch (yyn) {
case 3:
#line 107 "scripts/genksyms/parse.y"
{ is_typedef = 0; is_extern = 0; current_name = NULL; decl_spec = NULL; ;
break;}
case 4:
#line 109 "scripts/genksyms/parse.y"
{ free_list(*yyvsp[0], NULL); *yyvsp[0] = NULL; ;
break;}
case 5:
#line 113 "scripts/genksyms/parse.y"
{ is_typedef = 1; ;
break;}
case 6:
#line 114 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 11:
#line 119 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 12:
#line 120 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 13:
#line 125 "scripts/genksyms/parse.y"
{ if (current_name) {
struct string_list *decl = (*yyvsp[0])->next;
(*yyvsp[0])->next = NULL;
add_symbol(current_name,
is_typedef ? SYM_TYPEDEF : SYM_NORMAL,
decl, is_extern);
current_name = NULL;
}
yyval = yyvsp[0];
;
break;}
case 14:
#line 138 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 16:
#line 144 "scripts/genksyms/parse.y"
{ struct string_list *decl = *yyvsp[0];
*yyvsp[0] = NULL;
add_symbol(current_name,
is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
current_name = NULL;
yyval = yyvsp[0];
;
break;}
case 17:
#line 152 "scripts/genksyms/parse.y"
{ struct string_list *decl = *yyvsp[0];
*yyvsp[0] = NULL;
free_list(*yyvsp[-1], NULL);
*yyvsp[-1] = decl_spec;
add_symbol(current_name,
is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
current_name = NULL;
yyval = yyvsp[0];
;
break;}
case 18:
#line 165 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0] ? yyvsp[0] : yyvsp[-1] ? yyvsp[-1] : yyvsp[-2] ? yyvsp[-2] : yyvsp[-3]; ;
break;}
case 19:
#line 170 "scripts/genksyms/parse.y"
{ decl_spec = NULL; ;
break;}
case 21:
#line 175 "scripts/genksyms/parse.y"
{ decl_spec = *yyvsp[0]; ;
break;}
case 22:
#line 176 "scripts/genksyms/parse.y"
{ decl_spec = *yyvsp[0]; ;
break;}
case 23:
#line 181 "scripts/genksyms/parse.y"
{ /* Version 2 checksumming ignores storage class, as that
is really irrelevant to the linkage. */
remove_node(yyvsp[0]);
yyval = yyvsp[0];
;
break;}
case 28:
#line 193 "scripts/genksyms/parse.y"
{ is_extern = 1; yyval = yyvsp[0]; ;
break;}
case 29:
#line 194 "scripts/genksyms/parse.y"
{ is_extern = 0; yyval = yyvsp[0]; ;
break;}
case 33:
#line 205 "scripts/genksyms/parse.y"
{ remove_node(yyvsp[-1]); (*yyvsp[0])->tag = SYM_STRUCT; yyval = yyvsp[0]; ;
break;}
case 34:
#line 207 "scripts/genksyms/parse.y"
{ remove_node(yyvsp[-1]); (*yyvsp[0])->tag = SYM_UNION; yyval = yyvsp[0]; ;
break;}
case 35:
#line 209 "scripts/genksyms/parse.y"
{ remove_node(yyvsp[-1]); (*yyvsp[0])->tag = SYM_ENUM; yyval = yyvsp[0]; ;
break;}
case 36:
#line 213 "scripts/genksyms/parse.y"
{ struct string_list *s = *yyvsp[0], *i = *yyvsp[-1], *r;
r = copy_node(i); r->tag = SYM_STRUCT;
r->next = (*yyvsp[-2])->next; *yyvsp[0] = r; (*yyvsp[-2])->next = NULL;
add_symbol(i->string, SYM_STRUCT, s, is_extern);
yyval = yyvsp[0];
;
break;}
case 37:
#line 220 "scripts/genksyms/parse.y"
{ struct string_list *s = *yyvsp[0], *i = *yyvsp[-1], *r;
r = copy_node(i); r->tag = SYM_UNION;
r->next = (*yyvsp[-2])->next; *yyvsp[0] = r; (*yyvsp[-2])->next = NULL;
add_symbol(i->string, SYM_UNION, s, is_extern);
yyval = yyvsp[0];
;
break;}
case 38:
#line 227 "scripts/genksyms/parse.y"
{ struct string_list *s = *yyvsp[0], *i = *yyvsp[-1], *r;
r = copy_node(i); r->tag = SYM_ENUM;
r->next = (*yyvsp[-2])->next; *yyvsp[0] = r; (*yyvsp[-2])->next = NULL;
add_symbol(i->string, SYM_ENUM, s, is_extern);
yyval = yyvsp[0];
;
break;}
case 39:
#line 235 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 40:
#line 236 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 41:
#line 237 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 52:
#line 251 "scripts/genksyms/parse.y"
{ (*yyvsp[0])->tag = SYM_TYPEDEF; yyval = yyvsp[0]; ;
break;}
case 53:
#line 256 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0] ? yyvsp[0] : yyvsp[-1]; ;
break;}
case 54:
#line 260 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 57:
#line 266 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 61:
#line 272 "scripts/genksyms/parse.y"
{ /* restrict has no effect in prototypes so ignore it */
remove_node(yyvsp[0]);
yyval = yyvsp[0];
;
break;}
case 62:
#line 279 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 64:
#line 285 "scripts/genksyms/parse.y"
{ if (current_name != NULL) {
error_with_pos("unexpected second declaration name");
YYERROR;
} else {
current_name = (*yyvsp[0])->string;
yyval = yyvsp[0];
}
;
break;}
case 65:
#line 294 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 66:
#line 296 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 67:
#line 298 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 68:
#line 300 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 69:
#line 302 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 70:
#line 308 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 74:
#line 316 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 75:
#line 318 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 76:
#line 320 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 77:
#line 322 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 78:
#line 324 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 79:
#line 328 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 81:
#line 330 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 82:
#line 334 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 85:
#line 341 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 86:
#line 346 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0] ? yyvsp[0] : yyvsp[-1]; ;
break;}
case 87:
#line 351 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0] ? yyvsp[0] : yyvsp[-1]; ;
break;}
case 89:
#line 356 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 90:
#line 358 "scripts/genksyms/parse.y"
{ /* For version 2 checksums, we don't want to remember
private parameter names. */
remove_node(yyvsp[0]);
yyval = yyvsp[0];
;
break;}
case 91:
#line 366 "scripts/genksyms/parse.y"
{ remove_node(yyvsp[0]);
yyval = yyvsp[0];
;
break;}
case 92:
#line 370 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 93:
#line 372 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 94:
#line 374 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 95:
#line 376 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 96:
#line 378 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 97:
#line 383 "scripts/genksyms/parse.y"
{ struct string_list *decl = *yyvsp[-1];
*yyvsp[-1] = NULL;
add_symbol(current_name, SYM_NORMAL, decl, is_extern);
yyval = yyvsp[0];
;
break;}
case 98:
#line 391 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 100:
#line 398 "scripts/genksyms/parse.y"
{ remove_list(yyvsp[0], &(*yyvsp[-1])->next); yyval = yyvsp[0]; ;
break;}
case 101:
#line 402 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 102:
#line 403 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 103:
#line 407 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 106:
#line 413 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 107:
#line 418 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 108:
#line 420 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 109:
#line 424 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 112:
#line 430 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 113:
#line 434 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0] ? yyvsp[0] : yyvsp[-1]; ;
break;}
case 114:
#line 435 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 116:
#line 440 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 117:
#line 444 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 119:
#line 449 "scripts/genksyms/parse.y"
{ yyval = yyvsp[0]; ;
break;}
case 120:
#line 453 "scripts/genksyms/parse.y"
{ yyval = NULL; ;
break;}
case 122:
#line 459 "scripts/genksyms/parse.y"
{ export_symbol((*yyvsp[-2])->string); yyval = yyvsp[0]; ;
break;}
}
/* the action file gets copied in in place of this dollarsign */
#line 543 "/usr/lib/bison.simple"
yyvsp -= yylen;
yyssp -= yylen;
#ifdef YYLSP_NEEDED
yylsp -= yylen;
#endif
#if YYDEBUG != 0
if (yydebug)
{
short *ssp1 = yyss - 1;
fprintf (stderr, "state stack now");
while (ssp1 != yyssp)
fprintf (stderr, " %d", *++ssp1);
fprintf (stderr, "\n");
}
#endif
*++yyvsp = yyval;
#ifdef YYLSP_NEEDED
yylsp++;
if (yylen == 0)
{
yylsp->first_line = yylloc.first_line;
yylsp->first_column = yylloc.first_column;
yylsp->last_line = (yylsp-1)->last_line;
yylsp->last_column = (yylsp-1)->last_column;
yylsp->text = 0;
}
else
{
yylsp->last_line = (yylsp+yylen-1)->last_line;
yylsp->last_column = (yylsp+yylen-1)->last_column;
}
#endif
/* Now "shift" the result of the reduction.
Determine what state that goes to,
based on the state we popped back to
and the rule number reduced by. */
yyn = yyr1[yyn];
yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
yystate = yytable[yystate];
else
yystate = yydefgoto[yyn - YYNTBASE];
goto yynewstate;
yyerrlab: /* here on detecting error */
if (! yyerrstatus)
/* If not already recovering from an error, report this error. */
{
++yynerrs;
#ifdef YYERROR_VERBOSE
yyn = yypact[yystate];
if (yyn > YYFLAG && yyn < YYLAST)
{
int size = 0;
char *msg;
int x, count;
count = 0;
/* Start X at -yyn if nec to avoid negative indexes in yycheck. */
for (x = (yyn < 0 ? -yyn : 0);
x < (sizeof(yytname) / sizeof(char *)); x++)
if (yycheck[x + yyn] == x)
size += strlen(yytname[x]) + 15, count++;
msg = (char *) malloc(size + 15);
if (msg != 0)
{
strcpy(msg, "parse error");
if (count < 5)
{
count = 0;
for (x = (yyn < 0 ? -yyn : 0);
x < (sizeof(yytname) / sizeof(char *)); x++)
if (yycheck[x + yyn] == x)
{
strcat(msg, count == 0 ? ", expecting `" : " or `");
strcat(msg, yytname[x]);
strcat(msg, "'");
count++;
}
}
yyerror(msg);
free(msg);
}
else
yyerror ("parse error; also virtual memory exceeded");
}
else
#endif /* YYERROR_VERBOSE */
yyerror("parse error");
}
goto yyerrlab1;
yyerrlab1: /* here on error raised explicitly by an action */
if (yyerrstatus == 3)
{
/* if just tried and failed to reuse lookahead token after an error, discard it. */
/* return failure if at end of input */
if (yychar == YYEOF)
YYABORT;
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
#endif
yychar = YYEMPTY;
}
/* Else will try to reuse lookahead token
after shifting the error token. */
yyerrstatus = 3; /* Each real token shifted decrements this */
goto yyerrhandle;
yyerrdefault: /* current state does not do anything special for the error token. */
#if 0
/* This is wrong; only states that explicitly want error tokens
should shift them. */
yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/
if (yyn) goto yydefault;
#endif
yyerrpop: /* pop the current state because it cannot handle the error token */
if (yyssp == yyss) YYABORT;
yyvsp--;
yystate = *--yyssp;
#ifdef YYLSP_NEEDED
yylsp--;
#endif
#if YYDEBUG != 0
if (yydebug)
{
short *ssp1 = yyss - 1;
fprintf (stderr, "Error: state stack now");
while (ssp1 != yyssp)
fprintf (stderr, " %d", *++ssp1);
fprintf (stderr, "\n");
}
#endif
yyerrhandle:
yyn = yypact[yystate];
if (yyn == YYFLAG)
goto yyerrdefault;
yyn += YYTERROR;
if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
goto yyerrdefault;
yyn = yytable[yyn];
if (yyn < 0)
{
if (yyn == YYFLAG)
goto yyerrpop;
yyn = -yyn;
goto yyreduce;
}
else if (yyn == 0)
goto yyerrpop;
if (yyn == YYFINAL)
YYACCEPT;
#if YYDEBUG != 0
if (yydebug)
fprintf(stderr, "Shifting error token, ");
#endif
*++yyvsp = yylval;
#ifdef YYLSP_NEEDED
*++yylsp = yylloc;
#endif
yystate = yyn;
goto yynewstate;
yyacceptlab:
/* YYACCEPT comes here. */
if (yyfree_stacks)
{
free (yyss);
free (yyvs);
#ifdef YYLSP_NEEDED
free (yyls);
#endif
}
return 0;
yyabortlab:
/* YYABORT comes here. */
if (yyfree_stacks)
{
free (yyss);
free (yyvs);
#ifdef YYLSP_NEEDED
free (yyls);
#endif
}
return 1;
}
#line 463 "scripts/genksyms/parse.y"
static void
yyerror(const char *e)
{
error_with_pos("%s", e);
}
scripts/genksyms/parse.h_shipped 0 → 100644
View file @ 7e285bef
#ifndef YYSTYPE
#define YYSTYPE int
#endif
#define ASM_KEYW 257
#define ATTRIBUTE_KEYW 258
#define AUTO_KEYW 259
#define BOOL_KEYW 260
#define CHAR_KEYW 261
#define CONST_KEYW 262
#define DOUBLE_KEYW 263
#define ENUM_KEYW 264
#define EXTERN_KEYW 265
#define FLOAT_KEYW 266
#define INLINE_KEYW 267
#define INT_KEYW 268
#define LONG_KEYW 269
#define REGISTER_KEYW 270
#define RESTRICT_KEYW 271
#define SHORT_KEYW 272
#define SIGNED_KEYW 273
#define STATIC_KEYW 274
#define STRUCT_KEYW 275
#define TYPEDEF_KEYW 276
#define UNION_KEYW 277
#define UNSIGNED_KEYW 278
#define VOID_KEYW 279
#define VOLATILE_KEYW 280
#define TYPEOF_KEYW 281
#define EXPORT_SYMBOL_KEYW 282
#define ASM_PHRASE 283
#define ATTRIBUTE_PHRASE 284
#define BRACE_PHRASE 285
#define BRACKET_PHRASE 286
#define EXPRESSION_PHRASE 287
#define CHAR 288
#define DOTS 289
#define IDENT 290
#define INT 291
#define REAL 292
#define STRING 293
#define TYPE 294
#define OTHER 295
#define FILENAME 296
extern YYSTYPE yylval;
scripts/genksyms/parse.y 0 → 100644
View file @ 7e285bef
/* C global declaration parser for genksyms.
Copyright 1996, 1997 Linux International.
New implementation contributed by Richard Henderson <rth@tamu.edu>
Based on original work by Bjorn Ekwall <bj0rn@blox.se>
This file is part of the Linux modutils.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
%{
#include <assert.h>
#include <malloc.h>
#include "genksyms.h"
static int is_typedef;
static int is_extern;
static char *current_name;
static struct string_list *decl_spec;
static void yyerror(const char *);
static inline void
remove_node(struct string_list **p)
{
struct string_list *node = *p;
*p = node->next;
free_node(node);
}
static inline void
remove_list(struct string_list **pb, struct string_list **pe)
{
struct string_list *b = *pb, *e = *pe;
*pb = e;
free_list(b, e);
}
%}
%token ASM_KEYW
%token ATTRIBUTE_KEYW
%token AUTO_KEYW
%token BOOL_KEYW
%token CHAR_KEYW
%token CONST_KEYW
%token DOUBLE_KEYW
%token ENUM_KEYW
%token EXTERN_KEYW
%token FLOAT_KEYW
%token INLINE_KEYW
%token INT_KEYW
%token LONG_KEYW
%token REGISTER_KEYW
%token RESTRICT_KEYW
%token SHORT_KEYW
%token SIGNED_KEYW
%token STATIC_KEYW
%token STRUCT_KEYW
%token TYPEDEF_KEYW
%token UNION_KEYW
%token UNSIGNED_KEYW
%token VOID_KEYW
%token VOLATILE_KEYW
%token TYPEOF_KEYW
%token EXPORT_SYMBOL_KEYW
%token ASM_PHRASE
%token ATTRIBUTE_PHRASE
%token BRACE_PHRASE
%token BRACKET_PHRASE
%token EXPRESSION_PHRASE
%token CHAR
%token DOTS
%token IDENT
%token INT
%token REAL
%token STRING
%token TYPE
%token OTHER
%token FILENAME
%%
declaration_seq:
declaration
| declaration_seq declaration
;
declaration:
{ is_typedef = 0; is_extern = 0; current_name = NULL; decl_spec = NULL; }
declaration1
{ free_list(*$2, NULL); *$2 = NULL; }
;
declaration1:
TYPEDEF_KEYW { is_typedef = 1; } simple_declaration
{ $$ = $3; }
| simple_declaration
| function_definition
| asm_definition
| export_definition
| error ';' { $$ = $2; }
| error '}' { $$ = $2; }
;
simple_declaration:
decl_specifier_seq_opt init_declarator_list_opt ';'
{ if (current_name) {
struct string_list *decl = (*$3)->next;
(*$3)->next = NULL;
add_symbol(current_name,
is_typedef ? SYM_TYPEDEF : SYM_NORMAL,
decl, is_extern);
current_name = NULL;
}
$$ = $3;
}
;
init_declarator_list_opt:
/* empty */ { $$ = NULL; }
| init_declarator_list
;
init_declarator_list:
init_declarator
{ struct string_list *decl = *$1;
*$1 = NULL;
add_symbol(current_name,
is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
current_name = NULL;
$$ = $1;
}
| init_declarator_list ',' init_declarator
{ struct string_list *decl = *$3;
*$3 = NULL;
free_list(*$2, NULL);
*$2 = decl_spec;
add_symbol(current_name,
is_typedef ? SYM_TYPEDEF : SYM_NORMAL, decl, is_extern);
current_name = NULL;
$$ = $3;
}
;
init_declarator:
declarator asm_phrase_opt attribute_opt initializer_opt
{ $$ = $4 ? $4 : $3 ? $3 : $2 ? $2 : $1; }
;
/* Hang on to the specifiers so that we can reuse them. */
decl_specifier_seq_opt:
/* empty */ { decl_spec = NULL; }
| decl_specifier_seq
;
decl_specifier_seq:
decl_specifier { decl_spec = *$1; }
| decl_specifier_seq decl_specifier { decl_spec = *$2; }
;
decl_specifier:
storage_class_specifier
{ /* Version 2 checksumming ignores storage class, as that
is really irrelevant to the linkage. */
remove_node($1);
$$ = $1;
}
| type_specifier
;
storage_class_specifier:
AUTO_KEYW
| REGISTER_KEYW
| STATIC_KEYW
| EXTERN_KEYW { is_extern = 1; $$ = $1; }
| INLINE_KEYW { is_extern = 0; $$ = $1; }
;
type_specifier:
simple_type_specifier
| cvar_qualifier
| TYPEOF_KEYW '(' type_specifier ')'
/* References to s/u/e's defined elsewhere. Rearrange things
so that it is easier to expand the definition fully later. */
| STRUCT_KEYW IDENT
{ remove_node($1); (*$2)->tag = SYM_STRUCT; $$ = $2; }
| UNION_KEYW IDENT
{ remove_node($1); (*$2)->tag = SYM_UNION; $$ = $2; }
| ENUM_KEYW IDENT
{ remove_node($1); (*$2)->tag = SYM_ENUM; $$ = $2; }
/* Full definitions of an s/u/e. Record it. */
| STRUCT_KEYW IDENT class_body
{ struct string_list *s = *$3, *i = *$2, *r;
r = copy_node(i); r->tag = SYM_STRUCT;
r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
add_symbol(i->string, SYM_STRUCT, s, is_extern);
$$ = $3;
}
| UNION_KEYW IDENT class_body
{ struct string_list *s = *$3, *i = *$2, *r;
r = copy_node(i); r->tag = SYM_UNION;
r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
add_symbol(i->string, SYM_UNION, s, is_extern);
$$ = $3;
}
| ENUM_KEYW IDENT BRACE_PHRASE
{ struct string_list *s = *$3, *i = *$2, *r;
r = copy_node(i); r->tag = SYM_ENUM;
r->next = (*$1)->next; *$3 = r; (*$1)->next = NULL;
add_symbol(i->string, SYM_ENUM, s, is_extern);
$$ = $3;
}
/* Anonymous s/u/e definitions. Nothing needs doing. */
| ENUM_KEYW BRACE_PHRASE { $$ = $2; }
| STRUCT_KEYW class_body { $$ = $2; }
| UNION_KEYW class_body { $$ = $2; }
;
simple_type_specifier:
CHAR_KEYW
| SHORT_KEYW
| INT_KEYW
| LONG_KEYW
| SIGNED_KEYW
| UNSIGNED_KEYW
| FLOAT_KEYW
| DOUBLE_KEYW
| VOID_KEYW
| BOOL_KEYW
| TYPE { (*$1)->tag = SYM_TYPEDEF; $$ = $1; }
;
ptr_operator:
'*' cvar_qualifier_seq_opt
{ $$ = $2 ? $2 : $1; }
;
cvar_qualifier_seq_opt:
/* empty */ { $$ = NULL; }
| cvar_qualifier_seq
;
cvar_qualifier_seq:
cvar_qualifier
| cvar_qualifier_seq cvar_qualifier { $$ = $2; }
;
cvar_qualifier:
CONST_KEYW | VOLATILE_KEYW | ATTRIBUTE_PHRASE
| RESTRICT_KEYW
{ /* restrict has no effect in prototypes so ignore it */
remove_node($1);
$$ = $1;
}
;
declarator:
ptr_operator declarator { $$ = $2; }
| direct_declarator
;
direct_declarator:
IDENT
{ if (current_name != NULL) {
error_with_pos("unexpected second declaration name");
YYERROR;
} else {
current_name = (*$1)->string;
$$ = $1;
}
}
| direct_declarator '(' parameter_declaration_clause ')'
{ $$ = $4; }
| direct_declarator '(' error ')'
{ $$ = $4; }
| direct_declarator BRACKET_PHRASE
{ $$ = $2; }
| '(' declarator ')'
{ $$ = $3; }
| '(' error ')'
{ $$ = $3; }
;
/* Nested declarators differ from regular declarators in that they do
not record the symbols they find in the global symbol table. */
nested_declarator:
ptr_operator nested_declarator { $$ = $2; }
| direct_nested_declarator
;
direct_nested_declarator:
IDENT
| TYPE
| direct_nested_declarator '(' parameter_declaration_clause ')'
{ $$ = $4; }
| direct_nested_declarator '(' error ')'
{ $$ = $4; }
| direct_nested_declarator BRACKET_PHRASE
{ $$ = $2; }
| '(' nested_declarator ')'
{ $$ = $3; }
| '(' error ')'
{ $$ = $3; }
;
parameter_declaration_clause:
parameter_declaration_list_opt DOTS { $$ = $2; }
| parameter_declaration_list_opt
| parameter_declaration_list ',' DOTS { $$ = $3; }
;
parameter_declaration_list_opt:
/* empty */ { $$ = NULL; }
| parameter_declaration_list
;
parameter_declaration_list:
parameter_declaration
| parameter_declaration_list ',' parameter_declaration
{ $$ = $3; }
;
parameter_declaration:
decl_specifier_seq m_abstract_declarator
{ $$ = $2 ? $2 : $1; }
;
m_abstract_declarator:
ptr_operator m_abstract_declarator
{ $$ = $2 ? $2 : $1; }
| direct_m_abstract_declarator
;
direct_m_abstract_declarator:
/* empty */ { $$ = NULL; }
| IDENT
{ /* For version 2 checksums, we don't want to remember
private parameter names. */
remove_node($1);
$$ = $1;
}
/* This wasn't really a typedef name but an identifier that
shadows one. */
| TYPE
{ remove_node($1);
$$ = $1;
}
| direct_m_abstract_declarator '(' parameter_declaration_clause ')'
{ $$ = $4; }
| direct_m_abstract_declarator '(' error ')'
{ $$ = $4; }
| direct_m_abstract_declarator BRACKET_PHRASE
{ $$ = $2; }
| '(' m_abstract_declarator ')'
{ $$ = $3; }
| '(' error ')'
{ $$ = $3; }
;
function_definition:
decl_specifier_seq_opt declarator BRACE_PHRASE
{ struct string_list *decl = *$2;
*$2 = NULL;
add_symbol(current_name, SYM_NORMAL, decl, is_extern);
$$ = $3;
}
;
initializer_opt:
/* empty */ { $$ = NULL; }
| initializer
;
/* We never care about the contents of an initializer. */
initializer:
'=' EXPRESSION_PHRASE
{ remove_list($2, &(*$1)->next); $$ = $2; }
;
class_body:
'{' member_specification_opt '}' { $$ = $3; }
| '{' error '}' { $$ = $3; }
;
member_specification_opt:
/* empty */ { $$ = NULL; }
| member_specification
;
member_specification:
member_declaration
| member_specification member_declaration { $$ = $2; }
;
member_declaration:
decl_specifier_seq_opt member_declarator_list_opt ';'
{ $$ = $3; }
| error ';'
{ $$ = $2; }
;
member_declarator_list_opt:
/* empty */ { $$ = NULL; }
| member_declarator_list
;
member_declarator_list:
member_declarator
| member_declarator_list ',' member_declarator { $$ = $3; }
;
member_declarator:
nested_declarator attribute_opt { $$ = $2 ? $2 : $1; }
| IDENT member_bitfield_declarator { $$ = $2; }
| member_bitfield_declarator
;
member_bitfield_declarator:
':' EXPRESSION_PHRASE { $$ = $2; }
;
attribute_opt:
/* empty */ { $$ = NULL; }
| ATTRIBUTE_PHRASE
;
asm_definition:
ASM_PHRASE ';' { $$ = $2; }
;
asm_phrase_opt:
/* empty */ { $$ = NULL; }
| ASM_PHRASE
;
export_definition:
EXPORT_SYMBOL_KEYW '(' IDENT ')' ';'
{ export_symbol((*$3)->string); $$ = $5; }
;
%%
static void
yyerror(const char *e)
{
error_with_pos("%s", e);
}
scripts/mk_elfconfig.c
View file @ 7e285bef
......@@ -9,6 +9,9 @@ main(int argc, char **argv)
unsigned char ei[EI_NIDENT];
union { short s; char c[2]; } endian_test;
if (argc != 2) {
fprintf(stderr, "Error: no arch\n");
}
if (fread(ei, 1, EI_NIDENT, stdin) != EI_NIDENT) {
fprintf(stderr, "Error: input truncated\n");
return 1;
......@@ -52,6 +55,11 @@ main(int argc, char **argv)
else
abort();
if (strcmp(argv[1], "v850") == 0)
printf("#define MODULE_SYMBOL_PREFIX \"_\"\n");
else
printf("#define MODULE_SYMBOL_PREFIX \"\"\n");
return 0;
}
scripts/modpost.c
View file @ 7e285bef
......@@ -265,6 +265,9 @@ parse_elf_finish(struct elf_info *info)
munmap(info->hdr, info->size);
}
#define CRC_PFX MODULE_SYMBOL_PREFIX "__crc_"
#define KSYMTAB_PFX MODULE_SYMBOL_PREFIX "__ksymtab_"
void
handle_modversions(struct module *mod, struct elf_info *info,
Elf_Sym *sym, const char *symname)
......@@ -279,9 +282,10 @@ handle_modversions(struct module *mod, struct elf_info *info,
break;
case SHN_ABS:
/* CRC'd symbol */
if (memcmp(symname, "__crc_", 6) == 0) {
if (memcmp(symname, CRC_PFX, strlen(CRC_PFX)) == 0) {
crc = (unsigned int) sym->st_value;
add_exported_symbol(symname+6, mod, &crc);
add_exported_symbol(symname + strlen(CRC_PFX),
mod, &crc);
modversions = 1;
}
break;
......@@ -290,15 +294,20 @@ handle_modversions(struct module *mod, struct elf_info *info,
if (ELF_ST_BIND(sym->st_info) != STB_GLOBAL)
break;
s = alloc_symbol(symname);
/* add to list */
s->next = mod->unres;
mod->unres = s;
if (memcmp(symname, MODULE_SYMBOL_PREFIX,
strlen(MODULE_SYMBOL_PREFIX)) == 0) {
s = alloc_symbol(symname +
strlen(MODULE_SYMBOL_PREFIX));
/* add to list */
s->next = mod->unres;
mod->unres = s;
}
break;
default:
/* All exported symbols */
if (memcmp(symname, "__ksymtab_", 10) == 0) {
add_exported_symbol(symname+10, mod, NULL);
if (memcmp(symname, KSYMTAB_PFX, strlen(KSYMTAB_PFX)) == 0) {
add_exported_symbol(symname + strlen(KSYMTAB_PFX),
mod, NULL);
}
break;
}
......
sound/oss/trident.c
View file @ 7e285bef
......@@ -3059,7 +3059,7 @@ static void ali_ac97_set(struct trident_card *card, int secondary, u8 reg, u16 v
ncount = 10;
while(1) {
wcontrol = inw(TRID_REG(card, ALI_AC97_WRITE));
if(!wcontrol & 0x8000)
if(!(wcontrol & 0x8000))
break;
if(ncount <= 0)
break;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7