Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: hpwdt (12/12): Make NMI decoding a compile-time option
  watchdog: hpwdt (11/12): move NMI-decoding init and exit to seperate functions
  watchdog: hpwdt (10/12): Use "decoding" instead of "sourcing"
  watchdog: hpwdt (9/12): hpwdt_pretimeout reorganization
  watchdog: hpwdt (8/12): implement WDIOC_GETTIMELEFT
  watchdog: hpwdt (7/12): allow full range of timer values supported by hardware
  watchdog: hpwdt (6/12): Introduce SECS_TO_TICKS() macro
  watchdog: hpwdt (5/12): Make x86 assembly ifdef guard more strict
  watchdog: hpwdt (4/12): Despecificate driver from iLO2
  watchdog: hpwdt (3/12): Group NMI sourcing specific items together
  watchdog: hpwdt (2/12): Group options that affect watchdog behavior together
  watchdog: hpwdt (1/12): clean-up include-files.

drivers/watchdog/Kconfig

@@ -574,16 +574,21 @@ config IT87_WDT
 	  be called it87_wdt.
 
 config HP_WATCHDOG
-	tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+	tristate "HP Proliant iLO2+ Hardware Watchdog Timer"
 	depends on X86
 	help
 	  A software monitoring watchdog and NMI sourcing driver. This driver
-	  will detect lockups and provide stack trace. Also, when an NMI
-	  occurs this driver will make the necessary BIOS calls to log
-	  the cause of the NMI. This is a driver that will only load on a
-	  HP ProLiant system with a minimum of iLO2 support.
-	  To compile this driver as a module, choose M here: the
-	  module will be called hpwdt.
+	  will detect lockups and provide a stack trace. This is a driver that
+	  will only load on a HP ProLiant system with a minimum of iLO2 support.
+	  To compile this driver as a module, choose M here: the module will be
+	  called hpwdt.
+
+config HPWDT_NMI_DECODING
+	bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
+	depends on HP_WATCHDOG
+	help
+	  When an NMI occurs this feature will make the necessary BIOS calls to
+	  log the cause of the NMI.
 
 config SC1200_WDT
 	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"

drivers/watchdog/hpwdt.c

@@ -16,38 +16,55 @@
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/nmi.h>
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
-#include <linux/mm.h>
 #include <linux/module.h>
-#include <linux/kdebug.h>
 #include <linux/moduleparam.h>
-#include <linux/notifier.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
 #include <linux/watchdog.h>
+#ifdef CONFIG_HPWDT_NMI_DECODING
 #include <linux/dmi.h>
-#include <linux/efi.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <asm/desc.h>
+#include <linux/spinlock.h>
+#include <linux/nmi.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
 #include <asm/cacheflush.h>
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+#define HPWDT_VERSION			"1.2.0"
+#define SECS_TO_TICKS(secs)		((secs) * 1000 / 128)
+#define TICKS_TO_SECS(ticks)		((ticks) * 128 / 1000)
+#define HPWDT_MAX_TIMER			TICKS_TO_SECS(65535)
+#define DEFAULT_MARGIN			30
+
+static unsigned int soft_margin = DEFAULT_MARGIN;	/* in seconds */
+static unsigned int reload;			/* the computed soft_margin */
+static int nowayout = WATCHDOG_NOWAYOUT;
+static char expect_release;
+static unsigned long hpwdt_is_open;
 
+static void __iomem *pci_mem_addr;		/* the PCI-memory address */
+static unsigned long __iomem *hpwdt_timer_reg;
+static unsigned long __iomem *hpwdt_timer_con;
+
+static struct pci_device_id hpwdt_devices[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) },	/* iLO2 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) },	/* iLO3 */
+	{0},			/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
 #define PCI_BIOS32_SD_VALUE		0x5F32335F	/* "_32_" */
 #define CRU_BIOS_SIGNATURE_VALUE	0x55524324
 #define PCI_BIOS32_PARAGRAPH_LEN	16
 #define PCI_ROM_BASE1			0x000F0000
 #define ROM_SIZE			0x10000
-#define HPWDT_VERSION			"1.1.1"
 
 struct bios32_service_dir {
 	u32 signature;
@@ -112,37 +129,17 @@ struct cmn_registers {
 	u32 reflags;
 }  __attribute__((packed));
 
-#define DEFAULT_MARGIN	30
-static unsigned int soft_margin = DEFAULT_MARGIN;	/* in seconds */
-static unsigned int reload;			/* the computed soft_margin */
-static int nowayout = WATCHDOG_NOWAYOUT;
-static char expect_release;
-static unsigned long hpwdt_is_open;
+static unsigned int hpwdt_nmi_decoding;
 static unsigned int allow_kdump;
-static unsigned int hpwdt_nmi_sourcing;
 static unsigned int priority;		/* hpwdt at end of die_notify list */
-
-static void __iomem *pci_mem_addr;		/* the PCI-memory address */
-static unsigned long __iomem *hpwdt_timer_reg;
-static unsigned long __iomem *hpwdt_timer_con;
-
 static DEFINE_SPINLOCK(rom_lock);
-
 static void *cru_rom_addr;
-
 static struct cmn_registers cmn_regs;
 
-static struct pci_device_id hpwdt_devices[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) },
-	{0},			/* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, hpwdt_devices);
-
 extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
 						unsigned long *pRomEntry);
 
-#ifndef CONFIG_X86_64
+#ifdef CONFIG_X86_32
 /* --32 Bit Bios------------------------------------------------------------ */
 
 #define HPWDT_ARCH	32
@@ -331,8 +328,9 @@ static int __devinit detect_cru_service(void)
 	iounmap(p);
 	return rc;
 }
-
-#else
+/* ------------------------------------------------------------------------- */
+#endif /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_64
 /* --64 Bit Bios------------------------------------------------------------ */
 
 #define HPWDT_ARCH	64
@@ -410,17 +408,16 @@ static int __devinit detect_cru_service(void)
 	/* if cru_rom_addr has been set then we found a CRU service */
 	return ((cru_rom_addr != NULL) ? 0 : -ENODEV);
 }
-
 /* ------------------------------------------------------------------------- */
-
-#endif
+#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_HPWDT_NMI_DECODING */
 
 /*
  *	Watchdog operations
  */
 static void hpwdt_start(void)
 {
-	reload = (soft_margin * 1000) / 128;
+	reload = SECS_TO_TICKS(soft_margin);
 	iowrite16(reload, hpwdt_timer_reg);
 	iowrite16(0x85, hpwdt_timer_con);
 }
@@ -441,8 +438,7 @@ static void hpwdt_ping(void)
 
 static int hpwdt_change_timer(int new_margin)
 {
-	/* Arbitrary, can't find the card's limits */
-	if (new_margin < 5 || new_margin > 600) {
+	if (new_margin < 1 || new_margin > HPWDT_MAX_TIMER) {
 		printk(KERN_WARNING
 			"hpwdt: New value passed in is invalid: %d seconds.\n",
 			new_margin);
@@ -453,11 +449,17 @@ static int hpwdt_change_timer(int new_margin)
 	printk(KERN_DEBUG
 		"hpwdt: New timer passed in is %d seconds.\n",
 		new_margin);
-	reload = (soft_margin * 1000) / 128;
+	reload = SECS_TO_TICKS(soft_margin);
 
 	return 0;
 }
 
+static int hpwdt_time_left(void)
+{
+	return TICKS_TO_SECS(ioread16(hpwdt_timer_reg));
+}
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
 /*
  *	NMI Handler
  */
@@ -468,9 +470,11 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
 	static int die_nmi_called;
 
 	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
-		return NOTIFY_OK;
+		goto out;
+
+	if (!hpwdt_nmi_decoding)
+		goto out;
 
-	if (hpwdt_nmi_sourcing) {
 	spin_lock_irqsave(&rom_lock, rom_pl);
 	if (!die_nmi_called)
 		asminline_call(&cmn_regs, cru_rom_addr);
@@ -485,9 +489,10 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
 		panic("An NMI occurred, please see the Integrated "
 			"Management Log for details.\n");
 	}
-	}
+out:
 	return NOTIFY_OK;
 }
+#endif /* CONFIG_HPWDT_NMI_DECODING */
 
 /*
  *	/dev/watchdog handling
@@ -557,7 +562,7 @@ static const struct watchdog_info ident = {
 	.options = WDIOF_SETTIMEOUT |
 		   WDIOF_KEEPALIVEPING |
 		   WDIOF_MAGICCLOSE,
-	.identity = "HP iLO2 HW Watchdog Timer",
+	.identity = "HP iLO2+ HW Watchdog Timer",
 };
 
 static long hpwdt_ioctl(struct file *file, unsigned int cmd,
@@ -599,6 +604,10 @@ static long hpwdt_ioctl(struct file *file, unsigned int cmd,
 	case WDIOC_GETTIMEOUT:
 		ret = put_user(soft_margin, p);
 		break;
+
+	case WDIOC_GETTIMELEFT:
+		ret = put_user(hpwdt_time_left(), p);
+		break;
 	}
 	return ret;
 }
@@ -621,79 +630,44 @@ static struct miscdevice hpwdt_miscdev = {
 	.fops = &hpwdt_fops,
 };
 
+#ifdef CONFIG_HPWDT_NMI_DECODING
 static struct notifier_block die_notifier = {
 	.notifier_call = hpwdt_pretimeout,
 	.priority = 0,
 };
+#endif /* CONFIG_HPWDT_NMI_DECODING */
 
 /*
  *	Init & Exit
  */
 
+#ifdef CONFIG_HPWDT_NMI_DECODING
 #ifdef ARCH_HAS_NMI_WATCHDOG
-static void __devinit hpwdt_check_nmi_sourcing(struct pci_dev *dev)
+static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
 {
 	/*
 	 * If nmi_watchdog is turned off then we can turn on
-	 * our nmi sourcing capability.
+	 * our nmi decoding capability.
 	 */
 	if (!nmi_watchdog_active())
-		hpwdt_nmi_sourcing = 1;
+		hpwdt_nmi_decoding = 1;
 	else
-		dev_warn(&dev->dev, "NMI sourcing is disabled. To enable this "
+		dev_warn(&dev->dev, "NMI decoding is disabled. To enable this "
 			"functionality you must reboot with nmi_watchdog=0 "
 			"and load the hpwdt driver with priority=1.\n");
 }
 #else
-static void __devinit hpwdt_check_nmi_sourcing(struct pci_dev *dev)
+static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
 {
-	dev_warn(&dev->dev, "NMI sourcing is disabled. "
+	dev_warn(&dev->dev, "NMI decoding is disabled. "
 		"Your kernel does not support a NMI Watchdog.\n");
 }
-#endif
+#endif /* ARCH_HAS_NMI_WATCHDOG */
 
-static int __devinit hpwdt_init_one(struct pci_dev *dev,
-					const struct pci_device_id *ent)
+static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
 {
 	int retval;
 
-	/*
-	 * Check if we can do NMI sourcing or not
-	 */
-	hpwdt_check_nmi_sourcing(dev);
-
-	/*
-	 * First let's find out if we are on an iLO2 server. We will
-	 * not run on a legacy ASM box.
-	 * So we only support the G5 ProLiant servers and higher.
-	 */
-	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
-		dev_warn(&dev->dev,
-			"This server does not have an iLO2 ASIC.\n");
-		return -ENODEV;
-	}
-
-	if (pci_enable_device(dev)) {
-		dev_warn(&dev->dev,
-			"Not possible to enable PCI Device: 0x%x:0x%x.\n",
-			ent->vendor, ent->device);
-		return -ENODEV;
-	}
-
-	pci_mem_addr = pci_iomap(dev, 1, 0x80);
-	if (!pci_mem_addr) {
-		dev_warn(&dev->dev,
-			"Unable to detect the iLO2 server memory.\n");
-		retval = -ENOMEM;
-		goto error_pci_iomap;
-	}
-	hpwdt_timer_reg = pci_mem_addr + 0x70;
-	hpwdt_timer_con = pci_mem_addr + 0x72;
-
-	/* Make sure that we have a valid soft_margin */
-	if (hpwdt_change_timer(soft_margin))
-		hpwdt_change_timer(DEFAULT_MARGIN);
-
 	/*
 	 * We need to map the ROM to get the CRU service.
 	 * For 32 bit Operating Systems we need to go through the 32 Bit
@@ -705,7 +679,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 		dev_warn(&dev->dev,
 			"Unable to detect the %d Bit CRU Service.\n",
 			HPWDT_ARCH);
-		goto error_get_cru;
+		return retval;
 	}
 
 	/*
@@ -728,9 +702,87 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 		dev_warn(&dev->dev,
 			"Unable to register a die notifier (err=%d).\n",
 			retval);
-		goto error_die_notifier;
+		if (cru_rom_addr)
+			iounmap(cru_rom_addr);
+	}
+
+	dev_info(&dev->dev,
+			"HP Watchdog Timer Driver: NMI decoding initialized"
+			", allow kernel dump: %s (default = 0/OFF)"
+			", priority: %s (default = 0/LAST).\n",
+			(allow_kdump == 0) ? "OFF" : "ON",
+			(priority == 0) ? "LAST" : "FIRST");
+	return 0;
+}
+
+static void __devexit hpwdt_exit_nmi_decoding(void)
+{
+	unregister_die_notifier(&die_notifier);
+	if (cru_rom_addr)
+		iounmap(cru_rom_addr);
+}
+#else /* !CONFIG_HPWDT_NMI_DECODING */
+static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
+{
+}
+
+static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static void __devexit hpwdt_exit_nmi_decoding(void)
+{
+}
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+static int __devinit hpwdt_init_one(struct pci_dev *dev,
+					const struct pci_device_id *ent)
+{
+	int retval;
+
+	/*
+	 * Check if we can do NMI decoding or not
+	 */
+	hpwdt_check_nmi_decoding(dev);
+
+	/*
+	 * First let's find out if we are on an iLO2+ server. We will
+	 * not run on a legacy ASM box.
+	 * So we only support the G5 ProLiant servers and higher.
+	 */
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
+		dev_warn(&dev->dev,
+			"This server does not have an iLO2+ ASIC.\n");
+		return -ENODEV;
 	}
 
+	if (pci_enable_device(dev)) {
+		dev_warn(&dev->dev,
+			"Not possible to enable PCI Device: 0x%x:0x%x.\n",
+			ent->vendor, ent->device);
+		return -ENODEV;
+	}
+
+	pci_mem_addr = pci_iomap(dev, 1, 0x80);
+	if (!pci_mem_addr) {
+		dev_warn(&dev->dev,
+			"Unable to detect the iLO2+ server memory.\n");
+		retval = -ENOMEM;
+		goto error_pci_iomap;
+	}
+	hpwdt_timer_reg = pci_mem_addr + 0x70;
+	hpwdt_timer_con = pci_mem_addr + 0x72;
+
+	/* Make sure that we have a valid soft_margin */
+	if (hpwdt_change_timer(soft_margin))
+		hpwdt_change_timer(DEFAULT_MARGIN);
+
+	/* Initialize NMI Decoding functionality */
+	retval = hpwdt_init_nmi_decoding(dev);
+	if (retval != 0)
+		goto error_init_nmi_decoding;
+
 	retval = misc_register(&hpwdt_miscdev);
 	if (retval < 0) {
 		dev_warn(&dev->dev,
@@ -739,23 +791,14 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 		goto error_misc_register;
 	}
 
-	printk(KERN_INFO
-		"hp Watchdog Timer Driver: %s"
-		", timer margin: %d seconds (nowayout=%d)"
-		", allow kernel dump: %s (default = 0/OFF)"
-		", priority: %s (default = 0/LAST).\n",
-		HPWDT_VERSION, soft_margin, nowayout,
-		(allow_kdump == 0) ? "OFF" : "ON",
-		(priority == 0) ? "LAST" : "FIRST");
-
+	dev_info(&dev->dev, "HP Watchdog Timer Driver: %s"
+			", timer margin: %d seconds (nowayout=%d).\n",
+			HPWDT_VERSION, soft_margin, nowayout);
 	return 0;
 
 error_misc_register:
-	unregister_die_notifier(&die_notifier);
-error_die_notifier:
-	if (cru_rom_addr)
-		iounmap(cru_rom_addr);
-error_get_cru:
+	hpwdt_exit_nmi_decoding();
+error_init_nmi_decoding:
 	pci_iounmap(dev, pci_mem_addr);
 error_pci_iomap:
 	pci_disable_device(dev);
@@ -768,10 +811,7 @@ static void __devexit hpwdt_exit(struct pci_dev *dev)
 		hpwdt_stop();
 
 	misc_deregister(&hpwdt_miscdev);
-	unregister_die_notifier(&die_notifier);
-
-	if (cru_rom_addr)
-		iounmap(cru_rom_addr);
+	hpwdt_exit_nmi_decoding();
 	pci_iounmap(dev, pci_mem_addr);
 	pci_disable_device(dev);
 }
@@ -802,16 +842,18 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 module_param(soft_margin, int, 0);
 MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
 
-module_param(allow_kdump, int, 0);
-MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
-
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+#ifdef CONFIG_HPWDT_NMI_DECODING
+module_param(allow_kdump, int, 0);
+MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
+
 module_param(priority, int, 0);
 MODULE_PARM_DESC(priority, "The hpwdt driver handles NMIs first or last"
 		" (default = 0/Last)\n");
+#endif /* !CONFIG_HPWDT_NMI_DECODING */
 
 module_init(hpwdt_init);
 module_exit(hpwdt_cleanup);