Commit 7f1b9be1 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
  contains platform updates for 32- and 64-bit ARM, including defconfig
  updates to enable new options, drivers and platforms. There are also a
  few fixes and cleanups for some existing vendors.

  Some of the things worth highlighting here are:

   - Enabling new crypt drivers on arm64 defconfig

   - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig

   - Debug support enabled for Renesas r8a7743

   - Various config updates for Renesas platforms (sound, USB, other
     drivers)

   - Platform support (including SMP) for TI dra762

   - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
     DMA code"

* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: multi_v7_defconfig: make eSDHC driver built-in
  arm64: defconfig: enable rockchip graphics
  MAINTAINERS: Update Cavium ThunderX2 entry
  ARM: config: aspeed: Add I2C, VUART, LPC Snoop
  ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
  ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
  ARM: davinci_all_defconfig: enable tinydrm and ST7586
  arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
  ARM: defconfig: tegra: Enable ChipIdea UDC driver
  ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
  ARM: tegra: Add Tegra I2S interfaces to defconfig
  ARM: tegra: Update default configuration for v4.13-rc1
  MAINTAINERS: update ARM/ZTE entry
  soc: versatile: remove unnecessary static in realview_soc_probe()
  ARM: Convert to using %pOF instead of full_name
  ARM: hisi: Fix typo in comment
  ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add recently added crypto drivers as modules
  arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
  ...
parents d719518d e9e3969f
......@@ -80,6 +80,9 @@ SoCs:
- OMAP5432
compatible = "ti,omap5432", "ti,omap5"
- DRA762
compatible = "ti,dra762", "ti,dra7"
- DRA742
compatible = "ti,dra742", "ti,dra74", "ti,dra7"
......
......@@ -2101,17 +2101,38 @@ F: arch/arm/mach-pxa/include/mach/z2.h
ARM/ZTE ARCHITECTURE
M: Jun Nie <jun.nie@linaro.org>
M: Baoyou Xie <baoyou.xie@linaro.org>
M: Shawn Guo <shawnguo@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/zx2967*
F: arch/arm/mach-zx/
F: arch/arm64/boot/dts/zte/
F: drivers/clk/zte/
F: drivers/dma/zx_dma.c
F: drivers/gpio/gpio-zx.c
F: drivers/i2c/busses/i2c-zx2967.c
F: drivers/mmc/host/dw_mmc-zx.*
F: drivers/pinctrl/zte/
F: drivers/reset/reset-zx2967.c
F: drivers/soc/zte/
F: drivers/thermal/zx2967_thermal.c
F: drivers/watchdog/zx2967_wdt.c
F: Documentation/devicetree/bindings/arm/zte.txt
F: Documentation/devicetree/bindings/clock/zx296702-clk.txt
F: Documentation/devicetree/bindings/clock/zx2967*.txt
F: Documentation/devicetree/bindings/dma/zxdma.txt
F: Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
F: Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
F: Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
F: Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
F: Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
F: Documentation/devicetree/bindings/soc/zte/
F: include/dt-bindings/soc/zx*.h
F: Documentation/devicetree/bindings/sound/zte,*.txt
F: Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
F: Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
F: include/dt-bindings/clock/zx2967*.h
F: include/dt-bindings/soc/zte,*.h
F: sound/soc/codecs/zx_aud96p22.c
F: sound/soc/zte/
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
......@@ -3175,6 +3196,7 @@ S: Supported
F: drivers/crypto/cavium/cpt/
CAVIUM THUNDERX2 ARM64 SOC
M: Robert Richter <rrichter@cavium.com>
M: Jayachandran C <jnair@caviumnetworks.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
......
......@@ -646,7 +646,7 @@ choice
config DEBUG_OMAP2UART1
bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
help
This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
omap3 torpedo and 3530 lv som.
......@@ -654,17 +654,17 @@ choice
config DEBUG_OMAP2UART2
bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_OMAP2UART3
bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_OMAP3UART3
bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
help
This covers at least cm_t3x, beagle, crane, devkit8000,
igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
......@@ -673,17 +673,17 @@ choice
config DEBUG_OMAP4UART3
bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_OMAP3UART4
bool "Kernel low-level debugging messages via OMAP36XX UART4"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_OMAP4UART4
bool "Kernel low-level debugging messages via OMAP4/5 UART4"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_OMAP7XXUART1
bool "Kernel low-level debugging via OMAP730 UART1"
......@@ -712,22 +712,22 @@ choice
config DEBUG_TI81XXUART1
bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_TI81XXUART2
bool "Kernel low-level debugging messages via TI81XX UART2"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_TI81XXUART3
bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_AM33XXUART1
bool "Kernel low-level debugging messages via AM33XX UART1"
depends on ARCH_OMAP2PLUS
select DEBUG_OMAP2PLUS_UART
select DEBUG_UART_8250
config DEBUG_ZOOM_UART
bool "Kernel low-level debugging messages via Zoom2/3 UART"
......@@ -896,12 +896,13 @@ choice
via SCIF2 on Renesas R-Car H1 (R8A7779).
config DEBUG_RCAR_GEN2_SCIF0
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793"
depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
depends on ARCH_R8A7743 || ARCH_R8A7790 || ARCH_R8A7791 || \
ARCH_R8A7792 || ARCH_R8A7793
help
Say Y here if you want kernel low-level debugging support
via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H
(R8A7792), or M2-N (R8A7793).
via SCIF0 on Renesas RZ/G1M (R8A7743), R-Car H2 (R8A7790),
M2-W (R8A7791), V2H (R8A7792), or M2-N (R8A7793).
config DEBUG_RCAR_GEN2_SCIF2
bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
......@@ -1523,6 +1524,17 @@ config DEBUG_UART_PHYS
default 0x40090000 if DEBUG_LPC32XX
default 0x40100000 if DEBUG_PXA_UART1
default 0x42000000 if DEBUG_GEMINI
default 0x44e09000 if DEBUG_AM33XXUART1
default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
default 0x48022000 if DEBUG_TI81XXUART2
default 0x48024000 if DEBUG_TI81XXUART3
default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
default 0x49020000 if DEBUG_OMAP3UART3
default 0x49042000 if DEBUG_OMAP3UART4
default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
......@@ -1641,10 +1653,21 @@ config DEBUG_UART_VIRT
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
default 0xf9e09000 if DEBUG_AM33XXUART1
default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
default 0xfa022000 if DEBUG_TI81XXUART2
default 0xfa024000 if DEBUG_TI81XXUART3
default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
default 0xfa71e000 if DEBUG_QCOM_UARTDM
default 0xfb002000 if DEBUG_CNS3XXX
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfb020000 if DEBUG_OMAP3UART3
default 0xfb042000 if DEBUG_OMAP3UART4
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfc705000 if DEBUG_ZTE_ZX
default 0xfcfe8600 if DEBUG_BCM63XX_UART
......
......@@ -191,6 +191,7 @@ dp83867_0: ethernet-phy@2 {
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
ti,dp83867-rxctrl-strap-quirk;
};
dp83867_1: ethernet-phy@3 {
......@@ -199,6 +200,7 @@ dp83867_1: ethernet-phy@3 {
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,min-output-impedance;
ti,dp83867-rxctrl-strap-quirk;
};
};
......
......@@ -70,6 +70,7 @@ dp83867_0: ethernet-phy@2 {
ti,min-output-impedance;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
ti,dp83867-rxctrl-strap-quirk;
};
dp83867_1: ethernet-phy@3 {
......@@ -80,5 +81,6 @@ dp83867_1: ethernet-phy@3 {
ti,min-output-impedance;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
ti,dp83867-rxctrl-strap-quirk;
};
};
......@@ -24,6 +24,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G4=y
CONFIG_VMSPLIT_2G=y
CONFIG_AEABI=y
# CONFIG_CPU_SW_DOMAIN_PAN is not set
# CONFIG_COMPACTION is not set
......@@ -64,6 +65,7 @@ CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_BLK_DEV_RAM=y
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
CONFIG_NETCONSOLE=y
......@@ -104,6 +106,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_ASPEED_BT_IPMI_BMC=y
......@@ -114,6 +117,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_ASPEED=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_ASPEED=y
......@@ -166,7 +170,6 @@ CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_TIMEOUT=-1
# CONFIG_SCHED_DEBUG is not set
......
......@@ -67,6 +67,7 @@ CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_BLK_DEV_RAM=y
CONFIG_ASPEED_LPC_CTRL=y
CONFIG_ASPEED_LPC_SNOOP=y
CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
CONFIG_NETCONSOLE=y
......@@ -107,6 +108,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_ASPEED_BT_IPMI_BMC=y
......@@ -117,6 +119,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_ASPEED=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_ASPEED=y
......@@ -169,7 +172,6 @@ CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_TIMEOUT=-1
# CONFIG_SCHED_DEBUG is not set
......
......@@ -55,6 +55,7 @@ CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=32
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
......@@ -62,9 +63,15 @@ CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_NETDEVICES=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_BRCMFMAC=m
CONFIG_ZD1211RW=y
CONFIG_INPUT_EVDEV=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_TTY_PRINTK=y
......
......@@ -143,6 +143,8 @@ CONFIG_VIDEO_ADV7343=m
CONFIG_DRM=m
CONFIG_DRM_TILCDC=m
CONFIG_DRM_DUMB_VGA_DAC=m
CONFIG_DRM_TINYDRM=m
CONFIG_TINYDRM_ST7586=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DA8XX=y
......
......@@ -3,7 +3,6 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
......@@ -48,7 +47,43 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_BT=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LEDS=y
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_MAC80211_LEDS=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DMA_CMA=y
......@@ -65,7 +100,9 @@ CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
......@@ -189,7 +226,25 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
CONFIG_USB_DWC3=y
CONFIG_USB_DWC2=y
CONFIG_USB_HSIC_USB3503=y
......@@ -209,7 +264,6 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_MAX77693=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX8997=y
......@@ -253,18 +307,30 @@ CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
......@@ -276,6 +342,7 @@ CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRC_CCITT=y
CONFIG_FONTS=y
CONFIG_FONT_7x14=y
......@@ -27,7 +27,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
......
......@@ -51,6 +51,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_CMA=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
......@@ -186,6 +187,7 @@ CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
......@@ -193,12 +195,14 @@ CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_GPIO=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMX=y
CONFIG_SPI_FSL_DSPI=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_74X164=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_IMX=y
CONFIG_POWER_RESET_SYSCON=y
......@@ -227,14 +231,20 @@ CONFIG_REGULATOR_PFUZE100=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_RC_CORE=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_MUX=y
CONFIG_SOC_CAMERA=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_CODA=y
CONFIG_VIDEO_CODA=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_OV5640=m
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_IMX_IPUV3_CORE=y
CONFIG_DRM=y
......@@ -344,6 +354,9 @@ CONFIG_FSL_EDMA=y
CONFIG_IMX_SDMA=y
CONFIG_MXS_DMA=y
CONFIG_STAGING=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_IIO=y
CONFIG_IMX7D_ADC=y
CONFIG_VF610_ADC=y
......
......@@ -81,12 +81,8 @@ CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
......
......@@ -112,6 +112,9 @@ CONFIG_IP_NF_ARP_MANGLE=y
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP_SCTP=y
CONFIG_VLAN_8021Q=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -156,6 +159,8 @@ CONFIG_POWER_RESET_KEYSTONE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
......@@ -164,6 +169,8 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
......@@ -174,12 +181,18 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_MAILBOX=y
CONFIG_TI_MESSAGE_MANAGER=y
CONFIG_SOC_TI=y
CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
CONFIG_KEYSTONE_NAVIGATOR_DMA=y
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
CONFIG_KEYSTONE_IRQ=y
CONFIG_RESET_TI_SCI=m
CONFIG_RESET_TI_SYSCON=m
CONFIG_TI_SCI_PROTOCOL=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_FANOTIFY=y
......
......@@ -104,13 +104,11 @@ CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_ARCH_TEGRA_124_SOC=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_ARCH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_VEXPRESS_CA9X4=y
CONFIG_ARCH_VEXPRESS_TC2_PM=y
CONFIG_ARCH_WM8850=y
CONFIG_ARCH_ZYNQ=y
......@@ -331,6 +329,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_VT8500=y
......@@ -456,6 +455,7 @@ CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_INA2XX=m
CONFIG_CPU_THERMAL=y
CONFIG_BRCMSTB_THERMAL=m
CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
......@@ -585,6 +585,7 @@ CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_ML86V7667=m
CONFIG_DRM=y
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_I2C_ADV7511_AUDIO=y
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_DUMB_VGA_DAC=m
......@@ -604,7 +605,6 @@ CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_DRM_ATMEL_HLCDC=m
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_HDMI=y
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_SUN4I=m
CONFIG_DRM_TEGRA=y
......@@ -651,9 +651,11 @@ CONFIG_SND_SOC_SMDK_WM8994_PCM=m
CONFIG_SND_SOC_SNOW=m
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_RSRC_CARD=m
CONFIG_SND_SIMPLE_SCU_CARD=m
CONFIG_SND_SUN4I_CODEC=m
CONFIG_SND_SOC_TEGRA=m
CONFIG_SND_SOC_TEGRA20_I2S=m
CONFIG_SND_SOC_TEGRA30_I2S=m
CONFIG_SND_SOC_TEGRA_RT5640=m
CONFIG_SND_SOC_TEGRA_WM8753=m
CONFIG_SND_SOC_TEGRA_WM8903=m
......@@ -696,7 +698,6 @@ CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_AB8500_USB=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_OMAP_USB3=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MSM_OTG=m
......@@ -712,7 +713,7 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_OF_AT91=y
CONFIG_MMC_SDHCI_OF_ESDHC=m
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_MMC_SDHCI_DOVE=y
CONFIG_MMC_SDHCI_TEGRA=y
......@@ -729,7 +730,6 @@ CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
......@@ -826,7 +826,6 @@ CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
......@@ -838,7 +837,6 @@ CONFIG_CHROME_PLATFORMS=y
CONFIG_STAGING_BOARD=y
CONFIG_CROS_EC_CHARDEV=m
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_MAX77802=m
CONFIG_COMMON_CLK_RK808=m
CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_APQ_MMCC_8084=y
......@@ -934,7 +932,6 @@ CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_CRYPTO_DEV_TEGRA_AES=y
CONFIG_CPUFREQ_DT=y
CONFIG_KEYSTONE_IRQ=y
CONFIG_HW_RANDOM=y
......
......@@ -170,6 +170,7 @@ CONFIG_TI_CPTS=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_AT803X_PHY=y
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_PPP=m
......@@ -250,6 +251,7 @@ CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_LP87565=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TWL4030=y
CONFIG_W1=m
......@@ -284,6 +286,7 @@ CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TI_LP873X=y
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS65910=y
CONFIG_TWL6040_CORE=y
......@@ -292,6 +295,7 @@ CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP873X=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_TI_ABB=y
......
......@@ -199,7 +199,6 @@ CONFIG_QCOM_WCNSS_PIL=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
......
......@@ -27,6 +27,7 @@ CONFIG_ARCH_SH73A0=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
CONFIG_SMP=y
......@@ -83,14 +84,14 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_SH_ETH=y
CONFIG_RAVB=y
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_SMSC_PHY=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
......@@ -105,6 +106,7 @@ CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_SH_SCI_DMA=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_DEMUX_PINCTRL=y
......@@ -121,9 +123,9 @@ CONFIG_SPI_SH_HSPI=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_PCF857X=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
......@@ -153,10 +155,11 @@ CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7604=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_DRM=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_RCAR_DU=y
CONFIG_DRM_RCAR_HDMI=y
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SH_MOBILE_MERAM=y
# CONFIG_LCD_CLASS_DEVICE is not set
......@@ -169,12 +172,12 @@ CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_SH4_FSI=y
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_RSRC_CARD=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_WM8978=y
CONFIG_SND_SIMPLE_SCU_CARD=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_RCAR=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_R8A66597_HCD=y
......@@ -190,6 +193,7 @@ CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_DA9063=y
......
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CGROUPS=y
......@@ -56,7 +55,6 @@ CONFIG_STMMAC_ETH=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_SUN4I_LRADC=y
# CONFIG_INPUT_MOUSE is not set
......@@ -71,7 +69,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=8
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_SUN6I_P2WI=y
......@@ -80,14 +77,14 @@ CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_THERMAL=y
CONFIG_THERMAL_OF=y
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AC100=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
CONFIG_REGULATOR=y
......@@ -99,12 +96,9 @@ CONFIG_RC_CORE=y
CONFIG_RC_DEVICES=y
CONFIG_IR_SUNXI=y
CONFIG_DRM=y
CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_DRM_SUN4I=y
CONFIG_FB=y
CONFIG_DRM_DUMB_VGA_DAC=y
CONFIG_FB_SIMPLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
......@@ -130,12 +124,13 @@ CONFIG_RTC_CLASS=y
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_DRV_AC100=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_DMADEVICES=y
CONFIG_DMA_SUN6I=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXTCON=y
CONFIG_IIO=y
CONFIG_AXP20X_ADC=y
CONFIG_PWM=y
CONFIG_PWM_SUN4I=y
CONFIG_PHY_SUN4I_USB=y
......
......@@ -121,7 +121,6 @@ CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_INPUT_MISC=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
......@@ -202,6 +201,8 @@ CONFIG_SND_HDA_CODEC_HDMI=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA20_I2S=y
CONFIG_SND_SOC_TEGRA30_I2S=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
......@@ -218,6 +219,9 @@ CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_ACM=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_SDHCI=y
......@@ -247,8 +251,6 @@ CONFIG_RTC_DRV_TEGRA=y
CONFIG_DMADEVICES=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
......@@ -263,6 +265,8 @@ CONFIG_ARCH_TEGRA_124_SOC=y
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_MPU3050_I2C=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_AK8975=y
CONFIG_PWM=y
CONFIG_PWM_TEGRA=y
......@@ -288,13 +292,11 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_VM=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SG=y
......
......@@ -19,7 +19,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_VEXPRESS_CA9X4=y
CONFIG_ARCH_VEXPRESS_DCSCB=y
CONFIG_ARCH_VEXPRESS_TC2_PM=y
# CONFIG_SWP_EMULATE is not set
......
......@@ -12,43 +12,6 @@
#include <linux/serial_reg.h>
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
#define OMAP2_UART3_BASE 0x4806e000
/* OMAP3 serial ports */
#define OMAP3_UART1_BASE OMAP2_UART1_BASE
#define OMAP3_UART2_BASE OMAP2_UART2_BASE
#define OMAP3_UART3_BASE 0x49020000
#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
/* OMAP4 serial ports */
#define OMAP4_UART1_BASE OMAP2_UART1_BASE
#define OMAP4_UART2_BASE OMAP2_UART2_BASE
#define OMAP4_UART3_BASE 0x48020000
#define OMAP4_UART4_BASE 0x4806e000
/* TI81XX serial ports */
#define TI81XX_UART1_BASE 0x48020000
#define TI81XX_UART2_BASE 0x48022000
#define TI81XX_UART3_BASE 0x48024000
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
/* AM33XX serial port */
#define AM33XX_UART1_BASE 0x44E09000
/* OMAP5 serial ports */
#define OMAP5_UART1_BASE OMAP2_UART1_BASE
#define OMAP5_UART2_BASE OMAP2_UART2_BASE
#define OMAP5_UART3_BASE OMAP4_UART3_BASE
#define OMAP5_UART4_BASE OMAP4_UART4_BASE
#define OMAP5_UART5_BASE 0x48066000
#define OMAP5_UART6_BASE 0x48068000
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
......@@ -79,55 +42,6 @@ omap_uart_lsr: .word 0
bne 100f @ already configured
/* Configure the UART offset from the phys/virt base */
#ifdef CONFIG_DEBUG_OMAP2UART1
mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
b 98f
#endif
#ifdef CONFIG_DEBUG_OMAP2UART2
mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
b 98f
#endif
#ifdef CONFIG_DEBUG_OMAP2UART3
mov \rp, #UART_OFFSET(OMAP2_UART3_BASE)
b 98f
#endif
#ifdef CONFIG_DEBUG_OMAP3UART3
mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE
b 98f
#endif
#ifdef CONFIG_DEBUG_OMAP4UART3
mov \rp, #UART_OFFSET(OMAP4_UART3_BASE)
b 98f
#endif
#ifdef CONFIG_DEBUG_OMAP3UART4
mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE
b 98f
#endif
#ifdef CONFIG_DEBUG_OMAP4UART4
mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
#endif
#ifdef CONFIG_DEBUG_TI81XXUART1
mov \rp, #UART_OFFSET(TI81XX_UART1_BASE)
b 98f
#endif
#ifdef CONFIG_DEBUG_TI81XXUART2
mov \rp, #UART_OFFSET(TI81XX_UART2_BASE)
b 98f
#endif
#ifdef CONFIG_DEBUG_TI81XXUART3
mov \rp, #UART_OFFSET(TI81XX_UART3_BASE)
b 98f
#endif
#ifdef CONFIG_DEBUG_AM33XXUART1
ldr \rp, =AM33XX_UART1_BASE
and \rp, \rp, #0x00ffffff
b 97f
#endif
#ifdef CONFIG_DEBUG_ZOOM_UART
ldr \rp, =ZOOM_UART_BASE
str \rp, [\tmp, #0] @ omap_uart_phys
......@@ -138,28 +52,6 @@ omap_uart_lsr: .word 0
#endif
b 10b
/* AM33XX: Store both phys and virt address for the uart */
97: add \rp, \rp, #0x44000000 @ phys base
str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0x44000000 @ phys base
add \rp, \rp, #0xf9000000 @ virt base
str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0x48000000 @ phys base
str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base
str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
.align
99: .word .
.word omap_uart_phys
......
......@@ -101,8 +101,8 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
ops = arm_cpuidle_get_ops(enable_method);
if (!ops) {
pr_warn("%s: unsupported enable-method property: %s\n",
dn->full_name, enable_method);
pr_warn("%pOF: unsupported enable-method property: %s\n",
dn, enable_method);
return -EOPNOTSUPP;
}
......
......@@ -95,7 +95,7 @@ void __init arm_dt_init_cpu_maps(void)
if (of_node_cmp(cpu->type, "cpu"))
continue;
pr_debug(" * %s...\n", cpu->full_name);
pr_debug(" * %pOF...\n", cpu);
/*
* A device tree containing CPU nodes with missing "reg"
* properties is considered invalid to build the
......@@ -103,8 +103,7 @@ void __init arm_dt_init_cpu_maps(void)
*/
cell = of_get_property(cpu, "reg", &prop_bytes);
if (!cell || prop_bytes < sizeof(*cell)) {
pr_debug(" * %s missing reg property\n",
cpu->full_name);
pr_debug(" * %pOF missing reg property\n", cpu);
of_node_put(cpu);
return;
}
......
......@@ -127,8 +127,7 @@ static void __init parse_dt_topology(void)
rate = of_get_property(cn, "clock-frequency", &len);
if (!rate || len != 4) {
pr_err("%s missing clock-frequency property\n",
cn->full_name);
pr_err("%pOF missing clock-frequency property\n", cn);
continue;
}
......
......@@ -98,6 +98,13 @@ static struct clk clk_keypad = {
.enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
.set_rate = set_keytchclk_rate,
};
static struct clk clk_adc = {
.parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
.enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
.set_rate = set_keytchclk_rate,
};
static struct clk clk_spi = {
.parent = &clk_xtali,
.rate = EP93XX_EXT_CLK_RATE,
......@@ -214,6 +221,7 @@ static struct clk_lookup clocks[] = {
INIT_CK(NULL, "pll2", &clk_pll2),
INIT_CK("ohci-platform", NULL, &clk_usb_host),
INIT_CK("ep93xx-keypad", NULL, &clk_keypad),
INIT_CK("ep93xx-adc", NULL, &clk_adc),
INIT_CK("ep93xx-fb", NULL, &clk_video),
INIT_CK("ep93xx-spi.0", NULL, &clk_spi),
INIT_CK("ep93xx-i2s", "mclk", &clk_i2s_mclk),
......
......@@ -820,6 +820,30 @@ void ep93xx_ide_release_gpio(struct platform_device *pdev)
}
EXPORT_SYMBOL(ep93xx_ide_release_gpio);
/*************************************************************************
* EP93xx ADC
*************************************************************************/
static struct resource ep93xx_adc_resources[] = {
DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28),
DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH),
};
static struct platform_device ep93xx_adc_device = {
.name = "ep93xx-adc",
.id = -1,
.num_resources = ARRAY_SIZE(ep93xx_adc_resources),
.resource = ep93xx_adc_resources,
};
void __init ep93xx_register_adc(void)
{
/* Power up ADC, deactivate Touch Screen Controller */
ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN,
EP93XX_SYSCON_DEVCFG_ADCPD);
platform_device_register(&ep93xx_adc_device);
}
/*************************************************************************
* EP93xx Security peripheral
*************************************************************************/
......
......@@ -245,6 +245,7 @@ static void __init edb93xx_init_machine(void)
edb93xx_register_pwm();
edb93xx_register_fb();
edb93xx_register_ide();
ep93xx_register_adc();
}
......
......@@ -52,6 +52,7 @@ int ep93xx_i2s_acquire(void);
void ep93xx_i2s_release(void);
void ep93xx_register_ac97(void);
void ep93xx_register_ide(void);
void ep93xx_register_adc(void);
int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
void ep93xx_ide_release_gpio(struct platform_device *pdev);
......
......@@ -95,6 +95,7 @@
#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000)
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
......
......@@ -187,21 +187,20 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
struct irq_domain *parent_domain, *domain;
if (!parent) {
pr_err("%s: no parent, giving up\n", node->full_name);
pr_err("%pOF: no parent, giving up\n", node);
return -ENODEV;
}
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("%s: unable to obtain parent domain\n", node->full_name);
pr_err("%pOF: unable to obtain parent domain\n", node);
return -ENXIO;
}
pmu_base_addr = of_iomap(node, 0);
if (!pmu_base_addr) {
pr_err("%s: failed to find exynos pmu register\n",
node->full_name);
pr_err("%pOF: failed to find exynos pmu register\n", node);
return -ENOMEM;
}
......
menuconfig ARCH_GEMINI
bool "Cortina Systems Gemini"
depends on ARCH_MULTI_V4
select ARCH_HAS_RESET_CONTROLLER
select ARM_AMBA
select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
select COMMON_CLK_GEMINI
select FARADAY_FTINTC010
select FTTMR010_TIMER
select GPIO_FTGPIO010
select GPIOLIB
select PINCTRL
select PINCTRL_GEMINI
select POWER_RESET
select POWER_RESET_GEMINI_POWEROFF
select POWER_RESET_SYSCON
......
......@@ -109,7 +109,7 @@ static void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_a
virt = ioremap(start_addr, PAGE_SIZE);
writel_relaxed(0xe51ff004, virt); /* ldr pc, [rc, #-4] */
writel_relaxed(0xe51ff004, virt); /* ldr pc, [pc, #-4] */
writel_relaxed(jump_addr, virt + 4); /* pc jump phy address */
iounmap(virt);
}
......
......@@ -224,13 +224,13 @@ static int __init imx_gpc_init(struct device_node *node,
int i;
if (!parent) {
pr_err("%s: no parent, giving up\n", node->full_name);
pr_err("%pOF: no parent, giving up\n", node);
return -ENODEV;
}
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("%s: unable to obtain parent domain\n", node->full_name);
pr_err("%pOF: unable to obtain parent domain\n", node);
return -ENXIO;
}
......
......@@ -60,6 +60,8 @@ config MACH_ARMADA_38X
select ARM_ERRATA_720789
select ARM_ERRATA_753970
select ARM_GIC
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
select ARMADA_370_XP_IRQ
select ARMADA_38X_CLK
select HAVE_ARM_SCU
......
......@@ -107,8 +107,7 @@ static void __init kirkwood_dt_eth_fixup(void)
clk_prepare_enable(clk);
/* store MAC address register contents in local-mac-address */
pr_err(FW_INFO "%s: local-mac-address is not set\n",
np->full_name);
pr_err(FW_INFO "%pOF: local-mac-address is not set\n", np);
pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
if (!pmac)
......
......@@ -87,6 +87,7 @@ config SOC_DRA7XX
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
select ZONE_DMA if ARM_LPAE
select PINCTRL_TI_IODELAY if OF && PINCTRL
config ARCH_OMAP2PLUS
bool
......
......@@ -313,6 +313,7 @@ MACHINE_END
#ifdef CONFIG_SOC_DRA7XX
static const char *const dra74x_boards_compat[] __initconst = {
"ti,dra762",
"ti,am5728",
"ti,am5726",
"ti,dra742",
......
......@@ -204,61 +204,6 @@ static unsigned configure_dma_errata(void)
return errata;
}
static const struct dma_slave_map omap24xx_sdma_map[] = {
{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
{ "omap-aes", "tx", SDMA_FILTER_PARAM(9) },
{ "omap-aes", "rx", SDMA_FILTER_PARAM(10) },
{ "omap-sham", "rx", SDMA_FILTER_PARAM(13) },
{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
/* external DMA requests when tusb6010 is used */
{ "musb-tusb", "dmareq0", SDMA_FILTER_PARAM(2) },
{ "musb-tusb", "dmareq1", SDMA_FILTER_PARAM(3) },
{ "musb-tusb", "dmareq2", SDMA_FILTER_PARAM(14) }, /* OMAP2420 only */
{ "musb-tusb", "dmareq3", SDMA_FILTER_PARAM(15) }, /* OMAP2420 only */
{ "musb-tusb", "dmareq4", SDMA_FILTER_PARAM(16) }, /* OMAP2420 only */
{ "musb-tusb", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
};
static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
/* external DMA requests when tusb6010 is used */
{ "musb-hdrc.1.auto", "dmareq0", SDMA_FILTER_PARAM(2) },
......@@ -269,61 +214,6 @@ static const struct dma_slave_map omap24xx_sdma_dt_map[] = {
{ "musb-hdrc.1.auto", "dmareq5", SDMA_FILTER_PARAM(64) }, /* OMAP2420 only */
};
static const struct dma_slave_map omap3xxx_sdma_map[] = {
{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
{ "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) },
{ "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) },
{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
{ "omap-aes", "tx", SDMA_FILTER_PARAM(65) },
{ "omap-aes", "rx", SDMA_FILTER_PARAM(66) },
{ "omap-sham", "rx", SDMA_FILTER_PARAM(69) },
{ "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) },
{ "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) },
{ "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) },
{ "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) },
{ "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) },
{ "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) },
};
static struct omap_system_dma_plat_info dma_plat_info __initdata = {
.reg_map = reg_map,
.channel_stride = 0x60,
......@@ -352,25 +242,11 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
p.errata = configure_dma_errata();
if (!of_have_populated_dt()) {
if (soc_is_omap24xx()) {
p.slave_map = omap24xx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map);
} else if (soc_is_omap34xx() || soc_is_omap3630()) {
p.slave_map = omap3xxx_sdma_map;
p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map);
} else {
pr_err("%s: The legacy DMA map is not provided!\n",
__func__);
return -ENODEV;
}
} else {
if (soc_is_omap24xx()) {
/* DMA slave map for drivers not yet converted to DT */
p.slave_map = omap24xx_sdma_dt_map;
p.slavecnt = ARRAY_SIZE(omap24xx_sdma_dt_map);
}
}
pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
if (IS_ERR(pdev)) {
......@@ -413,21 +289,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
static int __init omap2_system_dma_init(void)
{
struct platform_device *pdev;
int res;
res = omap_hwmod_for_each_by_class("dma",
return omap_hwmod_for_each_by_class("dma",
omap2_system_dma_init_dev, NULL);
if (res)
return res;
if (of_have_populated_dt())
return res;
pdev = platform_device_register_full(&omap_dma_dev_info);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return res;
}
omap_arch_initcall(omap2_system_dma_init);
......@@ -663,6 +663,15 @@ void __init dra7xxx_check_revision(void)
hawkeye = (idcode >> 12) & 0xffff;
rev = (idcode >> 28) & 0xff;
switch (hawkeye) {
case 0xbb50:
switch (rev) {
case 0:
default:
omap_revision = DRA762_REV_ES1_0;
break;
}
break;
case 0xb990:
switch (rev) {
case 0:
......
......@@ -342,7 +342,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
c = &omap443x_cfg;
else if (soc_is_omap446x())
c = &omap446x_cfg;
else if (soc_is_dra74x() || soc_is_omap54xx())
else if (soc_is_dra74x() || soc_is_omap54xx() || soc_is_dra76x())
c = &omap5_cfg;
if (!c) {
......@@ -355,7 +355,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
cfg.startup_addr = c->startup_addr;
cfg.wakeupgen_base = omap_get_wakeupgen_base();
if (soc_is_dra74x() || soc_is_omap54xx()) {
if (soc_is_dra74x() || soc_is_omap54xx() || soc_is_dra76x()) {
if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
cfg.startup_addr = omap5_secondary_hyp_startup;
omap5_erratum_workaround_801819();
......
......@@ -522,13 +522,13 @@ static int __init wakeupgen_init(struct device_node *node,
u32 val;
if (!parent) {
pr_err("%s: no parent, giving up\n", node->full_name);
pr_err("%pOF: no parent, giving up\n", node);
return -ENODEV;
}
parent_domain = irq_find_host(parent);
if (!parent_domain) {
pr_err("%s: unable to obtain parent domain\n", node->full_name);
pr_err("%pOF: unable to obtain parent domain\n", node);
return -ENXIO;
}
/* Not supported on OMAP4 ES1.0 silicon */
......
......@@ -672,7 +672,6 @@ static int _od_suspend_noirq(struct device *dev)
if (!ret && !pm_runtime_status_suspended(dev)) {
if (pm_generic_runtime_suspend(dev) == 0) {
pm_runtime_set_suspended(dev);
omap_device_idle(pdev);
od->flags |= OMAP_DEVICE_SUSPENDED;
}
......@@ -689,15 +688,6 @@ static int _od_resume_noirq(struct device *dev)
if (od->flags & OMAP_DEVICE_SUSPENDED) {
od->flags &= ~OMAP_DEVICE_SUSPENDED;
omap_device_enable(pdev);
/*
* XXX: we run before core runtime pm has resumed itself. At
* this point in time, we just restore the runtime pm state and
* considering symmetric operations in resume, we donot expect
* to fail. If we failed, something changed in core runtime_pm
* framework OR some device driver messed things up, hence, WARN
*/
WARN(pm_runtime_set_active(dev),
"Could not set %s runtime state active\n", dev_name(dev));
pm_generic_runtime_resume(dev);
}
......
......@@ -2417,8 +2417,8 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
if (mem)
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
else
pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
oh->name, index, np->full_name);
pr_err("omap_hwmod: %s: Missing dt reg%i for %pOF\n",
oh->name, index, np);
return -ENXIO;
}
......
......@@ -4070,6 +4070,11 @@ static struct omap_hwmod_ocp_if *dra7xx_gp_hwmod_ocp_ifs[] __initdata = {
};
/* SoC variant specific hwmod links */
static struct omap_hwmod_ocp_if *dra76x_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per3__usb_otg_ss4,
NULL,
};
static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_per3__usb_otg_ss4,
NULL,
......@@ -4095,12 +4100,14 @@ int __init dra7xx_hwmod_init(void)
ret = omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
else if (!ret && soc_is_dra72x())
ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
else if (!ret && soc_is_dra76x())
ret = omap_hwmod_register_links(dra76x_hwmod_ocp_ifs);
if (!ret && omap_type() == OMAP2_DEVICE_TYPE_GP)
ret = omap_hwmod_register_links(dra7xx_gp_hwmod_ocp_ifs);
/* now for the IPs *NOT* in dra71 */
if (!ret && !of_machine_is_compatible("ti,dra718"))
/* now for the IPs available only in dra74 and dra72 */
if (!ret && !of_machine_is_compatible("ti,dra718") && !soc_is_dra76x())
ret = omap_hwmod_register_links(dra74x_dra72x_hwmod_ocp_ifs);
return ret;
......
......@@ -434,6 +434,26 @@ static void __init omap5_uevm_legacy_init(void)
}
#endif
#ifdef CONFIG_SOC_DRA7XX
static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1;
static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2;
static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3;
static void __init dra7x_evm_mmc_quirk(void)
{
if (omap_rev() == DRA752_REV_ES1_1 || omap_rev() == DRA752_REV_ES1_0) {
dra7_hsmmc_data_mmc1.version = "rev11";
dra7_hsmmc_data_mmc1.max_freq = 96000000;
dra7_hsmmc_data_mmc2.version = "rev11";
dra7_hsmmc_data_mmc2.max_freq = 48000000;
dra7_hsmmc_data_mmc3.version = "rev11";
dra7_hsmmc_data_mmc3.max_freq = 48000000;
}
}
#endif
static struct pcs_pdata pcs_pdata;
void omap_pcs_legacy_init(int irq, void (*rearm)(void))
......@@ -560,6 +580,14 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
&omap4_iommu_pdata),
OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
&omap4_iommu_pdata),
#endif
#ifdef CONFIG_SOC_DRA7XX
OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x4809c000, "4809c000.mmc",
&dra7_hsmmc_data_mmc1),
OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480b4000, "480b4000.mmc",
&dra7_hsmmc_data_mmc2),
OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc",
&dra7_hsmmc_data_mmc3),
#endif
/* Common auxdata */
OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
......@@ -589,6 +617,9 @@ static struct pdata_init pdata_quirks[] __initdata = {
#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
#ifdef CONFIG_SOC_DRA7XX
{ "ti,dra7-evm", dra7x_evm_mmc_quirk, },
#endif
{ /* sentinel */ },
};
......
......@@ -29,6 +29,7 @@
#include "prcm44xx.h"
#include "prm7xx.h"
#include "prcm_mpu7xx.h"
#include "soc.h"
/* iva_7xx_pwrdm: IVA-HD power domain */
static struct powerdomain iva_7xx_pwrdm = {
......@@ -63,6 +64,14 @@ static struct powerdomain custefuse_7xx_pwrdm = {
.flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
/* custefuse_aon_7xx_pwrdm: Customer efuse controller power domain */
static struct powerdomain custefuse_aon_7xx_pwrdm = {
.name = "custefuse_pwrdm",
.prcm_offs = DRA7XX_PRM_CUSTEFUSE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
};
/* ipu_7xx_pwrdm: Audio back end power domain */
static struct powerdomain ipu_7xx_pwrdm = {
.name = "ipu_pwrdm",
......@@ -350,7 +359,6 @@ static struct powerdomain eve1_7xx_pwrdm = {
static struct powerdomain *powerdomains_dra7xx[] __initdata = {
&iva_7xx_pwrdm,
&rtc_7xx_pwrdm,
&custefuse_7xx_pwrdm,
&ipu_7xx_pwrdm,
&dss_7xx_pwrdm,
&l4per_7xx_pwrdm,
......@@ -374,9 +382,32 @@ static struct powerdomain *powerdomains_dra7xx[] __initdata = {
NULL
};
static struct powerdomain *powerdomains_dra76x[] __initdata = {
&custefuse_aon_7xx_pwrdm,
NULL
};
static struct powerdomain *powerdomains_dra74x[] __initdata = {
&custefuse_7xx_pwrdm,
NULL
};
static struct powerdomain *powerdomains_dra72x[] __initdata = {
&custefuse_aon_7xx_pwrdm,
NULL
};
void __init dra7xx_powerdomains_init(void)
{
pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
pwrdm_register_pwrdms(powerdomains_dra7xx);
if (soc_is_dra76x())
pwrdm_register_pwrdms(powerdomains_dra76x);
else if (soc_is_dra74x())
pwrdm_register_pwrdms(powerdomains_dra74x);
else if (soc_is_dra72x())
pwrdm_register_pwrdms(powerdomains_dra72x);
pwrdm_complete_init();
}
......@@ -706,7 +706,7 @@ static int omap3xxx_prm_late_init(void)
np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
if (np) {
irq_num = of_irq_get(np, 0);
if (irq_num >= 0)
if (irq_num > 0)
omap3_prcm_irq_setup.irq = irq_num;
}
......
......@@ -747,7 +747,7 @@ static int omap44xx_prm_late_init(void)
* Already have OMAP4 IRQ num. For all other platforms, we need
* IRQ numbers from DT
*/
if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
if (irq_num <= 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
if (irq_num == -EPROBE_DEFER)
return irq_num;
......@@ -756,7 +756,7 @@ static int omap44xx_prm_late_init(void)
}
/* Once OMAP4 DT is filled as well */
if (irq_num >= 0) {
if (irq_num > 0) {
omap4_prcm_irq_setup.irq = irq_num;
omap4_prcm_irq_setup.xlate_irq = NULL;
}
......
......@@ -167,6 +167,7 @@ IS_TI_SUBCLASS(816x, 0x816)
IS_TI_SUBCLASS(814x, 0x814)
IS_AM_SUBCLASS(335x, 0x335)
IS_AM_SUBCLASS(437x, 0x437)
IS_DRA_SUBCLASS(76x, 0x76)
IS_DRA_SUBCLASS(75x, 0x75)
IS_DRA_SUBCLASS(72x, 0x72)
......@@ -185,6 +186,7 @@ IS_DRA_SUBCLASS(72x, 0x72)
#define soc_is_omap54xx() 0
#define soc_is_omap543x() 0
#define soc_is_dra7xx() 0
#define soc_is_dra76x() 0
#define soc_is_dra74x() 0
#define soc_is_dra72x() 0
......@@ -314,9 +316,11 @@ IS_OMAP_TYPE(3430, 0x3430)
#if defined(CONFIG_SOC_DRA7XX)
#undef soc_is_dra7xx
#undef soc_is_dra76x
#undef soc_is_dra74x
#undef soc_is_dra72x
#define soc_is_dra7xx() is_dra7xx()
#define soc_is_dra76x() is_dra76x()
#define soc_is_dra74x() is_dra75x()
#define soc_is_dra72x() is_dra72x()
#endif
......@@ -386,6 +390,7 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
#define DRA7XX_CLASS 0x07000000
#define DRA762_REV_ES1_0 (DRA7XX_CLASS | (0x62 << 16) | (0x10 << 8))
#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
......
......@@ -3,6 +3,7 @@ config ARCH_ROCKCHIP
depends on ARCH_MULTI_V7
select PINCTRL
select PINCTRL_ROCKCHIP
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_RESET_CONTROLLER
select ARM_AMBA
select ARM_GIC
......@@ -16,6 +17,7 @@ config ARCH_ROCKCHIP
select ROCKCHIP_TIMER
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
select ZONE_DMA if ARM_LPAE
help
Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs
containing the RK2928, RK30xx and RK31xx series.
......@@ -67,7 +67,7 @@ static struct reset_control *rockchip_get_core_reset(int cpu)
else
np = of_get_cpu_node(cpu, NULL);
return of_reset_control_get(np, NULL);
return of_reset_control_get_exclusive(np, NULL);
}
static int pmu_set_power_domain(int pd, bool on)
......@@ -182,8 +182,8 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
ret = of_address_to_resource(node, 0, &res);
if (ret < 0) {
pr_err("%s: could not get address for node %s\n",
__func__, node->full_name);
pr_err("%s: could not get address for node %pOF\n",
__func__, node);
return ret;
}
......
......@@ -229,7 +229,7 @@ config ARCH_H1940
config H1940BT
tristate "Control the state of H1940 bluetooth chip"
depends on ARCH_H1940
select RFKILL
depends on RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on h1940.
......
......@@ -173,7 +173,7 @@ static unsigned long s3c24xx_read_idcode_v5(void)
return gs;
#endif
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
#if defined(CONFIG_CPU_S3C2412)
return __raw_readl(S3C2412_GSTATUS1);
#else
return 1UL; /* don't look like an 2400 */
......
......@@ -77,7 +77,7 @@
#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
#if defined(CONFIG_CPU_S3C2412)
#define S3C2412_OSCSET S3C2410_CLKREG(0x18)
#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C)
......@@ -141,7 +141,7 @@
#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12)
#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14)
#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
#endif /* CONFIG_CPU_S3C2412 */
#define S3C2416_CLKDIV2 S3C2410_CLKREG(0x28)
......
......@@ -287,7 +287,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
.ecc_mode = NAND_ECC_SOFT,
.ecc_mode = NAND_ECC_HW,
};
/* DM9000AEP 10/100 ethernet controller */
......
......@@ -111,9 +111,6 @@ static struct platform_device *smdk2443_devices[] __initdata = {
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_hsmmc1,
#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
&s3c_device_ac97,
#endif
&s3c2443_device_dma,
};
......@@ -133,11 +130,6 @@ static void __init smdk2443_init_time(void)
static void __init smdk2443_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
#endif
platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
smdk_machine_init();
}
......
......@@ -33,10 +33,11 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
/*
* S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
* reset the UART configuration, only enable if you really need this!
*/
//#define CONFIG_DEBUG_RESUME
*/
//#define S3C24XX_DEBUG_RESUME
.text
......@@ -71,13 +72,13 @@ ENTRY(s3c_cpu_resume)
str r12, [ r14, #0x54 ]
#endif
#ifdef CONFIG_DEBUG_RESUME
#ifdef S3C24XX_DEBUG_RESUME
mov r3, #'L'
strb r3, [ r2, #S3C2410_UTXH ]
1001:
ldrb r14, [ r3, #S3C2410_UTRSTAT ]
tst r14, #S3C2410_UTRSTAT_TXE
beq 1001b
#endif /* CONFIG_DEBUG_RESUME */
#endif /* S3C24XX_DEBUG_RESUME */
b cpu_resume
config ARCH_SHMOBILE
bool
config ARCH_SHMOBILE_MULTI
bool
config PM_RMOBILE
bool
select PM
......@@ -34,7 +31,6 @@ menuconfig ARCH_RENESAS
depends on ARCH_MULTI_V7 && MMU
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_SHMOBILE
select ARCH_SHMOBILE_MULTI
select ARM_GIC
select GPIOLIB
select HAVE_ARM_SCU if SMP
......
......@@ -11,7 +11,9 @@
*/
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/soc/renesas/rcar-sysc.h>
#include <asm/io.h>
......@@ -69,8 +71,9 @@ void __init rcar_gen2_pm_init(void)
struct device_node *np, *cpus;
bool has_a7 = false;
bool has_a15 = false;
phys_addr_t boot_vector_addr = ICRAM1;
struct resource res;
u32 syscier = 0;
int error;
if (once++)
return;
......@@ -91,14 +94,38 @@ void __init rcar_gen2_pm_init(void)
else if (of_machine_is_compatible("renesas,r8a7791"))
syscier = 0x00111003;
np = of_find_compatible_node(NULL, NULL, "renesas,smp-sram");
if (!np) {
/* No smp-sram in DT, fall back to hardcoded address */
res = (struct resource)DEFINE_RES_MEM(ICRAM1,
shmobile_boot_size);
goto map;
}
error = of_address_to_resource(np, 0, &res);
if (error) {
pr_err("Failed to get smp-sram address: %d\n", error);
return;
}
map:
/* RAM for jump stub, because BAR requires 256KB aligned address */
p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
if (res.start & (256 * 1024 - 1) ||
resource_size(&res) < shmobile_boot_size) {
pr_err("Invalid smp-sram region\n");
return;
}
p = ioremap(res.start, resource_size(&res));
if (!p)
return;
memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
iounmap(p);
/* setup reset vectors */
p = ioremap_nocache(RST, 0x63);
bar = phys_to_sbar(boot_vector_addr);
bar = phys_to_sbar(res.start);
if (has_a15) {
writel_relaxed(bar, p + CA15BAR);
writel_relaxed(bar | SBAR_BAREN, p + CA15BAR);
......
......@@ -195,8 +195,7 @@ static void __init add_special_pd(struct device_node *np, enum pd_types type)
return;
}
pr_debug("Special PM domain %s type %d for %s\n", pd->name, type,
np->full_name);
pr_debug("Special PM domain %s type %d for %pOF\n", pd->name, type, np);
special_pds[num_special_pds].pd = pd;
special_pds[num_special_pds].type = type;
......@@ -331,13 +330,13 @@ static int __init rmobile_init_pm_domains(void)
for_each_compatible_node(np, NULL, "renesas,sysc-rmobile") {
base = of_iomap(np, 0);
if (!base) {
pr_warn("%s cannot map reg 0\n", np->full_name);
pr_warn("%pOF cannot map reg 0\n", np);
continue;
}
pmd = of_get_child_by_name(np, "pm-domains");
if (!pmd) {
pr_warn("%s lacks pm-domains node\n", np->full_name);
pr_warn("%pOF lacks pm-domains node\n", np);
continue;
}
......
......@@ -29,17 +29,29 @@
#include "common.h"
#include "rcar-gen2.h"
static const struct of_device_id cpg_matches[] __initconst = {
{ .compatible = "renesas,rcar-gen2-cpg-clocks", },
{ .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" },
{ .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" },
{ .compatible = "renesas,r8a7791-cpg-mssr", .data = "extal" },
{ .compatible = "renesas,r8a7793-cpg-mssr", .data = "extal" },
{ /* sentinel */ }
};
static unsigned int __init get_extal_freq(void)
{
const struct of_device_id *match;
struct device_node *cpg, *extal;
u32 freq = 20000000;
int idx = 0;
cpg = of_find_compatible_node(NULL, NULL,
"renesas,rcar-gen2-cpg-clocks");
cpg = of_find_matching_node_and_match(NULL, cpg_matches, &match);
if (!cpg)
return freq;
extal = of_parse_phandle(cpg, "clocks", 0);
if (match->data)
idx = of_property_match_string(cpg, "clock-names", match->data);
extal = of_parse_phandle(cpg, "clocks", idx);
of_node_put(cpg);
if (!extal)
return freq;
......@@ -58,7 +70,8 @@ void __init rcar_gen2_timer_init(void)
void __iomem *base;
u32 freq;
if (of_machine_is_compatible("renesas,r8a7792") ||
if (of_machine_is_compatible("renesas,r8a7745") ||
of_machine_is_compatible("renesas,r8a7792") ||
of_machine_is_compatible("renesas,r8a7794")) {
freq = 260000000 / 8; /* ZS / 8 */
/* CNTVOFF has to be initialized either from non-secure
......
......@@ -13,5 +13,7 @@ menuconfig ARCH_TEGRA
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select SOC_BUS
select ZONE_DMA if ARM_LPAE
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
help
This enables support for NVIDIA Tegra based systems.
......@@ -61,7 +61,7 @@
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
#if defined(CONFIG_CPU_S3C2412)
#ifndef __ASSEMBLY__
extern void __iomem *s3c24xx_va_gpio2;
#endif
......
......@@ -250,6 +250,7 @@ config ARCH_XGENE
config ARCH_ZX
bool "ZTE ZX SoC Family"
select PINCTRL
help
This enables support for ZTE ZX SoC Family
......
......@@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
......@@ -68,6 +69,7 @@ CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_RCAR=y
......@@ -88,6 +90,7 @@ CONFIG_XEN=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
CONFIG_HIBERNATION=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARM_CPUIDLE=y
CONFIG_CPU_FREQ=y
CONFIG_CPUFREQ_DT=y
......@@ -164,6 +167,7 @@ CONFIG_EEPROM_AT25=m
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_HISI_SAS=y
CONFIG_SCSI_HISI_SAS_PCI=y
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
......@@ -251,6 +255,8 @@ CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_MVEBU_UART=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
......@@ -280,6 +286,7 @@ CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MSM8916=y
......@@ -298,6 +305,7 @@ CONFIG_GPIO_MAX77620=y
CONFIG_POWER_RESET_MSM=y
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_SYSCON_REBOOT_MODE=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_LM90=m
......@@ -305,6 +313,7 @@ CONFIG_SENSORS_INA2XX=m
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_BRCMSTB_THERMAL=m
CONFIG_EXYNOS_THERMAL=y
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_WATCHDOG=y
......@@ -312,19 +321,24 @@ CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
CONFIG_RENESAS_WDT=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_BCM2835_WDT=y
CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_PWM=y
......@@ -359,6 +373,12 @@ CONFIG_DRM_EXYNOS_DSI=y
# CONFIG_DRM_EXYNOS_DP is not set
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y
CONFIG_DRM_ROCKCHIP=m
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_RCAR_VSP=y
......@@ -371,6 +391,7 @@ CONFIG_DRM_MESON=m
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
......@@ -381,8 +402,8 @@ CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_BCM2835_SOC_I2S=m
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SIMPLE_CARD=y
CONFIG_USB=y
CONFIG_USB_OTG=y
......@@ -404,6 +425,7 @@ CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_MSM_OTG=y
CONFIG_USB_QCOM_8X16_PHY=y
CONFIG_USB_ULPI=y
......@@ -452,6 +474,7 @@ CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_XGENE=y
CONFIG_DMADEVICES=y
CONFIG_DMA_BCM2835=m
CONFIG_K3_DMA=y
CONFIG_MV_XOR_V2=y
CONFIG_PL330_DMA=y
CONFIG_TEGRA20_APB_DMA=y
......@@ -474,6 +497,7 @@ CONFIG_CLK_QORIQ=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_MMCC_8996=y
......@@ -483,6 +507,7 @@ CONFIG_ARM_MHU=y
CONFIG_PLATFORM_MHU=y
CONFIG_BCM2835_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_ROCKCHIP_IOMMU=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_V3=y
CONFIG_RPMSG_QCOM_SMD=y
......@@ -516,6 +541,8 @@ CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
CONFIG_TEE=y
CONFIG_OPTEE=y
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EFI_CAPSULE_LOADER=y
......@@ -564,8 +591,17 @@ CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA256_ARM64=m
CONFIG_CRYPTO_SHA512_ARM64=m
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_CRC32_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64=m
CONFIG_CRYPTO_AES_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_AES_ARM64_BS=m
......@@ -70,8 +70,10 @@ static int omap_ocp2scp_probe(struct platform_device *pdev)
if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(regs))
goto err0;
if (IS_ERR(regs)) {
ret = PTR_ERR(regs);
goto err1;
}
pm_runtime_get_sync(&pdev->dev);
reg = readl_relaxed(regs + OCP2SCP_TIMING);
......@@ -83,6 +85,9 @@ static int omap_ocp2scp_probe(struct platform_device *pdev)
return 0;
err1:
pm_runtime_disable(&pdev->dev);
err0:
device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
......
......@@ -85,7 +85,7 @@ static struct device_attribute realview_build_attr =
static int realview_soc_probe(struct platform_device *pdev)
{
static struct regmap *syscon_regmap;
struct regmap *syscon_regmap;
struct soc_device *soc_dev;
struct soc_device_attribute *soc_dev_attr;
struct device_node *np = pdev->dev.of_node;
......
......@@ -67,6 +67,9 @@ struct omap_hsmmc_platform_data {
#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
unsigned features;
/* string specifying a particular variant of hardware */
char *version;
int gpio_cd; /* gpio (card detect) */
int gpio_cod; /* gpio (cover detect) */
int gpio_wp; /* gpio (write protect) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment