Merge tag 'mvebu-dt64-5.6-1' of git://git.infradead.org/linux-mvebu into arm/dt

mvebu dt64 for 5.6 (part 1)

 micro-DPU (uDPU) board changes (Armada 3270 based board):
 - Fix broken ethernet
 - Remove i2c-fast-mode property
 - Indicate that SFP cages support 3W modules
 SolidRun Clearfog GT 8K (Armada 8040 base board):
 - Fix switch cpu port node

* tag 'mvebu-dt64-5.6-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node
  arm64: dts: uDPU: SFP cages support 3W modules
  arm64: dts: uDPU: remove i2c-fast-mode
  arm64: dts: uDPU: fix broken ethernet

Link: https://lore.kernel.org/r/871rs53nu5.fsf@FE-laptopSigned-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts

@@ -69,6 +69,7 @@ sfp_eth0: sfp-eth0 {
 		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
@@ -78,6 +79,7 @@ sfp_eth1: sfp-eth1 {
 		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 	};
 };
 
@@ -119,12 +121,14 @@ &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
 };
 
 &i2c1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
 
 	lm75@48 {
 		status = "okay";
@@ -143,6 +147,7 @@ &eth0 {
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy1 0>;
 	sfp = <&sfp_eth0>;
 };
 
@@ -150,11 +155,14 @@ &eth1 {
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy0 1>;
 	sfp = <&sfp_eth1>;
 };
 
 &usb3 {
 	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
 };
 
 &uart0 {

arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

@@ -408,6 +408,8 @@ port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
 			};
 		};