Skip to content

L
linux
Commit 7f8165ee authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'microchip-dt64-6.11' of... 

Merge tag 'microchip-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt

Microchip ARM64 device tree updates for v6.11

It contains:
- cleanups for simple-bus nodes to comply with dtbs_check

* tag 'microchip-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  arm64: dts: microchip: sparx5_pcb135: move non-MMIO nodes out of axi
  arm64: dts: microchip: sparx5_pcb134: move non-MMIO nodes out of axi

Link: https://lore.kernel.org/r/20240629174051.665027-1-claudiu.beznea@tuxon.devSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents ade99061 3a94fa4c
Show whitespace changes
Inline Side-by-side
Showing with 241 additions and 226 deletions
arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
View file @ 7f8165ee
......@@ -13,6 +13,20 @@ gpio-restart {
priority = <200>;
};
i2c0_imux: i2c-mux-0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
i2c0_emux: i2c-mux-1 {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
leds {
compatible = "gpio-leds";
led-0 {
......@@ -248,6 +262,186 @@ led-47 {
default-state = "off";
};
};
sfp_eth12: sfp-eth12 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth13: sfp-eth13 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth14: sfp-eth14 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth15: sfp-eth15 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth48: sfp-eth48 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp5>;
tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth49: sfp-eth49 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp6>;
tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth50: sfp-eth50 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp7>;
tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth51: sfp-eth51 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp8>;
tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth52: sfp-eth52 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp9>;
tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth53: sfp-eth53 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp10>;
tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth54: sfp-eth54 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp11>;
tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth55: sfp-eth55 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp12>;
tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth56: sfp-eth56 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp13>;
tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth57: sfp-eth57 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp14>;
tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth58: sfp-eth58 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp15>;
tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth59: sfp-eth59 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp16>;
tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth60: sfp-eth60 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp17>;
tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp18>;
tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp19>;
tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp20>;
tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
};
};
&sgpio0 {
......@@ -385,21 +579,6 @@ i2cmux_11: i2cmux-11-pins {
};
};
&axi {
i2c0_imux: i2c-mux-0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
i2c0_emux: i2c-mux-1 {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
};
&i2c0_imux {
pinctrl-names =
"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
......@@ -535,169 +714,6 @@ phy64: ethernet-phy@64 {
};
};
&axi {
sfp_eth12: sfp-eth12 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth13: sfp-eth13 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth14: sfp-eth14 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth15: sfp-eth15 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth48: sfp-eth48 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp5>;
tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth49: sfp-eth49 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp6>;
tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth50: sfp-eth50 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp7>;
tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth51: sfp-eth51 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp8>;
tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth52: sfp-eth52 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp9>;
tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth53: sfp-eth53 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp10>;
tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth54: sfp-eth54 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp11>;
tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth55: sfp-eth55 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp12>;
tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth56: sfp-eth56 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp13>;
tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth57: sfp-eth57 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp14>;
tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth58: sfp-eth58 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp15>;
tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth59: sfp-eth59 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp16>;
tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth60: sfp-eth60 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp17>;
tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp18>;
tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp19>;
tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp20>;
tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
};
};
&switch {
ethernet-ports {
#address-cells = <1>;
......
arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
View file @ 7f8165ee
......@@ -13,6 +13,13 @@ gpio-restart {
priority = <200>;
};
i2c0_imux: i2c-mux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
leds {
compatible = "gpio-leds";
led-0 {
......@@ -56,6 +63,46 @@ led-7 {
default-state = "off";
};
};
sfp_eth60: sfp-eth60 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
};
};
&gpio {
......@@ -119,15 +166,6 @@ &sgpio2 {
microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
};
&axi {
i2c0_imux: i2c-mux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
};
&i2c0_imux {
pinctrl-names =
"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
......@@ -159,45 +197,6 @@ i2c_sfp4: i2c@3 {
};
};
&axi {
sfp_eth60: sfp-eth60 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth61: sfp-eth61 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth62: sfp-eth62 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp3>;
tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
};
sfp_eth63: sfp-eth63 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp4>;
tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7