x86, vt-d: Handle previous faults after enabling fault handling

Fault handling is getting enabled after enabling the interrupt-remapping (as
the success of interrupt-remapping can affect the apic mode and hence the
fault handling mode).

Hence there can potentially be some faults between the window of enabling
interrupt-remapping in the vt-d and the fault-handling of the vt-d units.

Handle any previous faults after enabling the vt-d fault handling.

For v2.6.38 cleanup, need to check if we can remove the dmar_fault() in the
enable_intr_remapping() and see if we can enable fault handling along with
enabling intr-remapping.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20101201062244.630417138@intel.com>
Cc: stable@kernel.org [v2.6.32+]
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

drivers/pci/dmar.c

@@ -1417,6 +1417,11 @@ int __init enable_drhd_fault_handling(void)
 			       (unsigned long long)drhd->reg_base_addr, ret);
 			return -1;
 		}
+
+		/*
+		 * Clear any previous faults.
+		 */
+		dmar_fault(iommu->irq, iommu);
 	}
 
 	return 0;