Commit 7ff9e200 authored by Anton Blanchard's avatar Anton Blanchard

ppc64: remove interrupt stacks which broke when the thread info stuff went in

parent e5122ad4
...@@ -83,9 +83,7 @@ int main(void) ...@@ -83,9 +83,7 @@ int main(void)
DEFINE(PACALPQUEUE, offsetof(struct paca_struct, lpQueuePtr)); DEFINE(PACALPQUEUE, offsetof(struct paca_struct, lpQueuePtr));
DEFINE(PACATOC, offsetof(struct paca_struct, xTOC)); DEFINE(PACATOC, offsetof(struct paca_struct, xTOC));
DEFINE(PACAEXCSP, offsetof(struct paca_struct, exception_sp)); DEFINE(PACAEXCSP, offsetof(struct paca_struct, exception_sp));
DEFINE(PACAHRDWINTSTACK, offsetof(struct paca_struct, xHrdIntStack));
DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, xProcEnabled)); DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, xProcEnabled));
DEFINE(PACAHRDWINTCOUNT, offsetof(struct paca_struct, xHrdIntCount));
DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr)); DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr));
DEFINE(PACAPROFENABLED, offsetof(struct paca_struct, prof_enabled)); DEFINE(PACAPROFENABLED, offsetof(struct paca_struct, prof_enabled));
DEFINE(PACAPROFLEN, offsetof(struct paca_struct, prof_len)); DEFINE(PACAPROFLEN, offsetof(struct paca_struct, prof_len));
......
...@@ -705,61 +705,9 @@ HardwareInterrupt_entry: ...@@ -705,61 +705,9 @@ HardwareInterrupt_entry:
li r20,0 li r20,0
li r6,0x500 li r6,0x500
bl .save_remaining_regs bl .save_remaining_regs
/* Determine if need to run do_irq on a hardware interrupt stack */
/* The first invocation of do_irq will occur on the kernel */
/* stack in the current stack */
/* All other invocations of do_irq will run on the hardware */
/* interrupt stack associated with the PACA of the current */
/* processor. */
/* */
/* The call to do_irq will preserve the value of r14 - r31 */
/* */
/*
* XXX turn off interrupt stacks until the thread_info stuff is fixed.
* Otherwise we end up setting need_resched etc bits in the interrupt
* stack and they never get seen when we return to the process stack - Anton
*/
#if 0
lbz r21,PACAHRDWINTCOUNT(r13) /* get hardware interrupt cnt */
cmpi 0,r21,1 /* */
addi r21,r21,1 /* incr hardware interrupt cnt*/
stb r21,PACAHRDWINTCOUNT(r13) /* */
bne 2f /* */
mr r14,r1 /* preserve current r1 */
ld r1,PACAHRDWINTSTACK(r13) /* */
std r14,0(r1) /* set the back chain */
bl .do_IRQ
lbz r22,PACAHRDWINTCOUNT(r13) /* get hardware interrupt cnt */
cmp 0,r22,r21 /* debug test */
bne 3f
subi r21,r21,1
stb r21,PACAHRDWINTCOUNT(r13) /* */
mr r1,r14 /* */
b .ret_from_except
#endif
2:
bl .do_IRQ bl .do_IRQ
#if 0
lbz r22,PACAHRDWINTCOUNT(r13) /* get hardware interrupt cnt */
cmp 0,r22,r21 /* debug test */
bne 3f /* */
subi r21,r21,1 /* decr hardware interrupt cnt*/
stb r21,PACAHRDWINTCOUNT(r13) /* */
#endif
b .ret_from_except b .ret_from_except
3:
/* error - counts out of sync */
#ifdef CONFIG_XMON
bl .xmon
#endif
4: b 4b
.globl Alignment_common .globl Alignment_common
Alignment_common: Alignment_common:
EXCEPTION_PROLOG_COMMON EXCEPTION_PROLOG_COMMON
...@@ -1845,18 +1793,6 @@ _STATIC(start_here_common) ...@@ -1845,18 +1793,6 @@ _STATIC(start_here_common)
li r5,0 li r5,0
std r0,PACAKSAVE(r13) std r0,PACAKSAVE(r13)
/* ptr to hardware interrupt stack for boot processor */
LOADADDR(r3, hardware_int_paca0)
li r5,PAGE_SIZE
sldi r5,r5,3
subi r5,r5,STACK_FRAME_OVERHEAD
add r3,r3,r5
std r3,PACAHRDWINTSTACK(r13)
li r3,0
stb r3,PACAHRDWINTCOUNT(r13)
/* Restore the parms passed in from the bootloader. */ /* Restore the parms passed in from the bootloader. */
mr r3,r31 mr r3,r31
mr r4,r30 mr r4,r30
...@@ -1978,10 +1914,6 @@ swapper_pg_dir: ...@@ -1978,10 +1914,6 @@ swapper_pg_dir:
ioremap_dir: ioremap_dir:
.space 4096 .space 4096
.globl hardware_int_paca0
hardware_int_paca0:
.space 8*PAGE_SIZE
/* 1 page segment table per cpu (max 48, cpu0 allocated at STAB0_PHYS_ADDR) */ /* 1 page segment table per cpu (max 48, cpu0 allocated at STAB0_PHYS_ADDR) */
.globl stab_array .globl stab_array
stab_array: stab_array:
......
...@@ -385,46 +385,6 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2, ...@@ -385,46 +385,6 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
return error; return error;
} }
void initialize_paca_hardware_interrupt_stack(void)
{
int i;
unsigned long stack;
unsigned long end_of_stack =0;
for (i=1; i < NR_CPUS; i++) {
if (!cpu_possible(i))
continue;
/* Carve out storage for the hardware interrupt stack */
stack = __get_free_pages(GFP_ATOMIC, get_order(8*PAGE_SIZE));
if ( !stack ) {
printk("ERROR, cannot find space for hardware stack.\n");
panic(" no hardware stack ");
}
/* Store the stack value in the PACA for the processor */
paca[i].xHrdIntStack = stack + (8*PAGE_SIZE) - STACK_FRAME_OVERHEAD;
paca[i].xHrdIntCount = 0;
}
/*
* __get_free_pages() might give us a page > KERNBASE+256M which
* is mapped with large ptes so we can't set up the guard page.
*/
if (cur_cpu_spec->cpu_features & CPU_FTR_16M_PAGE)
return;
for (i=0; i < NR_CPUS; i++) {
if (!cpu_possible(i))
continue;
/* set page at the top of stack to be protected - prevent overflow */
end_of_stack = paca[i].xHrdIntStack - (8*PAGE_SIZE - STACK_FRAME_OVERHEAD);
ppc_md.hpte_updateboltedpp(PP_RXRX,end_of_stack);
}
}
char *ppc_find_proc_name(unsigned *p, char *buf, unsigned buflen) char *ppc_find_proc_name(unsigned *p, char *buf, unsigned buflen)
{ {
unsigned long tb_flags; unsigned long tb_flags;
......
...@@ -540,8 +540,6 @@ static int __init setup_kcore(void) ...@@ -540,8 +540,6 @@ static int __init setup_kcore(void)
} }
module_init(setup_kcore); module_init(setup_kcore);
void initialize_paca_hardware_interrupt_stack(void);
void __init mem_init(void) void __init mem_init(void)
{ {
#ifndef CONFIG_DISCONTIGMEM #ifndef CONFIG_DISCONTIGMEM
...@@ -608,9 +606,6 @@ void __init mem_init(void) ...@@ -608,9 +606,6 @@ void __init mem_init(void)
#endif #endif
mem_init_done = 1; mem_init_done = 1;
/* set the last page of each hardware interrupt stack to be protected */
initialize_paca_hardware_interrupt_stack();
#ifdef CONFIG_PPC_ISERIES #ifdef CONFIG_PPC_ISERIES
create_virtual_bus_tce_table(); create_virtual_bus_tce_table();
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment