media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver

Adding support for the TC358746 parallel <-> MIPI CSI bridge. This chip
supports two operating modes:
  1st) parallel-in -> mipi-csi out
  2nd) mipi-csi in -> parallel out

This patch only adds the support for the 1st mode.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: remove() now returns void]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

drivers/media/i2c/Kconfig

@@ -1308,6 +1308,23 @@ config VIDEO_TC358743_CEC
 	  When selected the tc358743 will support the optional
 	  HDMI CEC feature.
 
+config VIDEO_TC358746
+	tristate "Toshiba TC358746 parallel-CSI2 bridge"
+	depends on VIDEO_DEV && PM && I2C
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	select GENERIC_PHY_MIPI_DPHY
+	select REGMAP_I2C
+	select COMMON_CLK
+	help
+	  Support for the Toshiba TC358746 parallel to MIPI CSI-2 bridge.
+	  The bridge can work in both directions but currently only the
+	  parallel-in / csi-out path is supported.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tc358746.
+
 config VIDEO_TVP514X
 	tristate "Texas Instruments TVP514x video decoder"
 	depends on VIDEO_DEV && I2C

drivers/media/i2c/Makefile

@@ -121,6 +121,7 @@ obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
 obj-$(CONFIG_VIDEO_ST_VGXY61) += st-vgxy61.o
 obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_TC358746) += tc358746.o
 obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o
 obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
 obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o