Commit 80acbed9 authored by Aaro Koskinen's avatar Aaro Koskinen Committed by David S. Miller

net: stmmac: don't set own bit too early for jumbo frames

Commit 0e80bdc9 ("stmmac: first frame prep at the end of xmit
routine") overlooked jumbo frames when re-ordering the code, and as a
result the own bit was not getting set anymore for the first jumbo frame
descriptor. Commit 487e2e22 ("net: stmmac: Set OWN bit for jumbo
frames") tried to fix this, but now the bit is getting set too early and
the DMA may start while we are still setting up the remaining descriptors.
And with the chain mode the own bit remains still unset.

Fix by setting the own bit at the end of xmit also with jumbo frames.

Fixes: 0e80bdc9 ("stmmac: first frame prep at the end of xmit routine")
Fixes: 487e2e22 ("net: stmmac: Set OWN bit for jumbo frames")
Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: default avatarJose Abreu <joabreu@synopsys.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9804501f
......@@ -59,7 +59,7 @@ static int jumbo_frm(void *p, struct sk_buff *skb, int csum)
desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
stmmac_prepare_tx_desc(priv, desc, 1, bmax, csum,
STMMAC_RING_MODE, 1, false, skb->len);
STMMAC_RING_MODE, 0, false, skb->len);
tx_q->tx_skbuff[entry] = NULL;
entry = STMMAC_GET_ENTRY(entry, DMA_TX_SIZE);
......@@ -91,7 +91,7 @@ static int jumbo_frm(void *p, struct sk_buff *skb, int csum)
tx_q->tx_skbuff_dma[entry].is_jumbo = true;
desc->des3 = cpu_to_le32(des2 + BUF_SIZE_4KiB);
stmmac_prepare_tx_desc(priv, desc, 1, nopaged_len, csum,
STMMAC_RING_MODE, 1, true, skb->len);
STMMAC_RING_MODE, 0, true, skb->len);
}
tx_q->cur_tx = entry;
......
......@@ -3216,13 +3216,15 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
stmmac_prepare_tx_desc(priv, first, 1, nopaged_len,
csum_insertion, priv->mode, 1, last_segment,
skb->len);
} else {
stmmac_set_tx_owner(priv, first);
}
/* The own bit must be the latest setting done when prepare the
* descriptor and then barrier is needed to make sure that
* all is coherent before granting the DMA engine.
*/
wmb();
}
netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment