misc: remove use of __devinit

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/ad525x_dpot-i2c.c

@@ -51,7 +51,7 @@ static const struct ad_dpot_bus_ops bops = {
 	.write_r8d16	= write_r8d16,
 };
 
-static int __devinit ad_dpot_i2c_probe(struct i2c_client *client,
+static int ad_dpot_i2c_probe(struct i2c_client *client,
 				      const struct i2c_device_id *id)
 {
 	struct ad_dpot_bus_data bdata = {

drivers/misc/ad525x_dpot-spi.c

@@ -75,7 +75,7 @@ static const struct ad_dpot_bus_ops bops = {
 	.write_r8d8	= write16,
 	.write_r8d16	= write24,
 };
-static int __devinit ad_dpot_spi_probe(struct spi_device *spi)
+static int ad_dpot_spi_probe(struct spi_device *spi)
 {
 	struct ad_dpot_bus_data bdata = {
 		.client = spi,

drivers/misc/ad525x_dpot.c

@@ -641,7 +641,7 @@ static const struct attribute_group ad525x_group_commands = {
 	.attrs = ad525x_attributes_commands,
 };
 
-__devinit int ad_dpot_add_files(struct device *dev,
+int ad_dpot_add_files(struct device *dev,
 		unsigned features, unsigned rdac)
 {
 	int err = sysfs_create_file(&dev->kobj,
@@ -685,7 +685,7 @@ inline void ad_dpot_remove_files(struct device *dev,
 	}
 }
 
-int __devinit ad_dpot_probe(struct device *dev,
+int ad_dpot_probe(struct device *dev,
 		struct ad_dpot_bus_data *bdata, unsigned long devid,
 			    const char *name)
 {

drivers/misc/apds990x.c

@@ -1047,7 +1047,7 @@ static struct attribute_group apds990x_attribute_group[] = {
 	{.attrs = sysfs_attrs_ctrl },
 };
 
-static int __devinit apds990x_probe(struct i2c_client *client,
+static int apds990x_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
 	struct apds990x_chip *chip;

drivers/misc/bh1770glc.c

@@ -1162,7 +1162,7 @@ static struct attribute_group bh1770_attribute_group = {
 	.attrs = sysfs_attrs
 };
 
-static int __devinit bh1770_probe(struct i2c_client *client,
+static int bh1770_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
 	struct bh1770_chip *chip;

drivers/misc/bh1780gli.c

@@ -144,7 +144,7 @@ static const struct attribute_group bh1780_attr_group = {
 	.attrs = bh1780_attributes,
 };
 
-static int __devinit bh1780_probe(struct i2c_client *client,
+static int bh1780_probe(struct i2c_client *client,
 						const struct i2c_device_id *id)
 {
 	int ret;

drivers/misc/bmp085-i2c.c

@@ -36,7 +36,7 @@ static int bmp085_i2c_detect(struct i2c_client *client,
 	return bmp085_detect(&client->dev);
 }
 
-static int __devinit bmp085_i2c_probe(struct i2c_client *client,
+static int bmp085_i2c_probe(struct i2c_client *client,
 				      const struct i2c_device_id *id)
 {
 	int err;

drivers/misc/bmp085-spi.c

@@ -22,7 +22,7 @@
 #include <linux/err.h>
 #include "bmp085.h"
 
-static int __devinit bmp085_spi_probe(struct spi_device *client)
+static int bmp085_spi_probe(struct spi_device *client)
 {
 	int err;
 	struct regmap *regmap;

drivers/misc/bmp085.c

@@ -420,7 +420,7 @@ struct regmap_config bmp085_regmap_config = {
 };
 EXPORT_SYMBOL_GPL(bmp085_regmap_config);
 
-__devinit int bmp085_probe(struct device *dev, struct regmap *regmap)
+int bmp085_probe(struct device *dev, struct regmap *regmap)
 {
 	struct bmp085_data *data;
 	int err = 0;

drivers/misc/cb710/core.c

@@ -30,7 +30,7 @@ void cb710_pci_update_config_reg(struct pci_dev *pdev,
 EXPORT_SYMBOL_GPL(cb710_pci_update_config_reg);
 
 /* Some magic writes based on Windows driver init code */
-static int __devinit cb710_pci_configure(struct pci_dev *pdev)
+static int cb710_pci_configure(struct pci_dev *pdev)
 {
 	unsigned int devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
 	struct pci_dev *pdev0;
@@ -96,7 +96,7 @@ static void cb710_release_slot(struct device *dev)
 #endif
 }
 
-static int __devinit cb710_register_slot(struct cb710_chip *chip,
+static int cb710_register_slot(struct cb710_chip *chip,
 	unsigned slot_mask, unsigned io_offset, const char *name)
 {
 	int nr = chip->slots;
@@ -201,7 +201,7 @@ static int cb710_resume(struct pci_dev *pdev)
 
 #endif /* CONFIG_PM */
 
-static int __devinit cb710_probe(struct pci_dev *pdev,
+static int cb710_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
 	struct cb710_chip *chip;

drivers/misc/cs5535-mfgpt.c

@@ -246,7 +246,7 @@ EXPORT_SYMBOL_GPL(cs5535_mfgpt_write);
  * Jordan tells me that he and Mitch once played w/ it, but it's unclear
  * what the results of that were (and they experienced some instability).
  */
-static void __devinit reset_all_timers(void)
+static void reset_all_timers(void)
 {
 	uint32_t val, dummy;
 
@@ -262,7 +262,7 @@ static void __devinit reset_all_timers(void)
  * In other cases (such as with VSAless OpenFirmware), the system firmware
  * leaves timers available for us to use.
  */
-static int __devinit scan_timers(struct cs5535_mfgpt_chip *mfgpt)
+static int scan_timers(struct cs5535_mfgpt_chip *mfgpt)
 {
 	struct cs5535_mfgpt_timer timer = { .chip = mfgpt };
 	unsigned long flags;
@@ -289,7 +289,7 @@ static int __devinit scan_timers(struct cs5535_mfgpt_chip *mfgpt)
 	return timers;
 }
 
-static int __devinit cs5535_mfgpt_probe(struct platform_device *pdev)
+static int cs5535_mfgpt_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	int err = -EIO, t;

drivers/misc/eeprom/eeprom_93xx46.c

@@ -309,7 +309,7 @@ static ssize_t eeprom_93xx46_store_erase(struct device *dev,
 }
 static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
 
-static int __devinit eeprom_93xx46_probe(struct spi_device *spi)
+static int eeprom_93xx46_probe(struct spi_device *spi)
 {
 	struct eeprom_93xx46_platform_data *pd;
 	struct eeprom_93xx46_dev *edev;

drivers/misc/fsa9480.c

@@ -407,7 +407,7 @@ static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw)
 	return 0;
 }
 
-static int __devinit fsa9480_probe(struct i2c_client *client,
+static int fsa9480_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);

drivers/misc/hpilo.c

@@ -686,7 +686,7 @@ static void ilo_unmap_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
 	pci_iounmap(pdev, hw->mmio_vaddr);
 }
 
-static int __devinit ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
+static int ilo_map_device(struct pci_dev *pdev, struct ilo_hwinfo *hw)
 {
 	int error = -ENOMEM;
 
@@ -751,7 +751,7 @@ static void ilo_remove(struct pci_dev *pdev)
 	ilo_hwdev[(minor / max_ccb)] = 0;
 }
 
-static int __devinit ilo_probe(struct pci_dev *pdev,
+static int ilo_probe(struct pci_dev *pdev,
 			       const struct pci_device_id *ent)
 {
 	int devnum, minor, start, error = 0;

drivers/misc/ibmasm/module.c

@@ -62,7 +62,7 @@ module_param(ibmasm_debug, int , S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(ibmasm_debug, " Set debug mode on or off");
 
 
-static int __devinit ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	int result;
 	struct service_processor *sp;

drivers/misc/ioc4.c

@@ -139,7 +139,7 @@ ioc4_unregister_submodule(struct ioc4_submodule *is)
  * even though the following code utilizes external interrupt registers
  * to perform the speed calculation.
  */
-static void __devinit
+static void
 ioc4_clock_calibrate(struct ioc4_driver_data *idd)
 {
 	union ioc4_int_out int_out;
@@ -231,7 +231,7 @@ ioc4_clock_calibrate(struct ioc4_driver_data *idd)
  * on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
  * If neither is present, it's a PCI-RT.
  */
-static unsigned int __devinit
+static unsigned int
 ioc4_variant(struct ioc4_driver_data *idd)
 {
 	struct pci_dev *pdev = NULL;
@@ -279,7 +279,7 @@ ioc4_load_modules(struct work_struct *work)
 static DECLARE_WORK(ioc4_load_modules_work, ioc4_load_modules);
 
 /* Adds a new instance of an IOC4 card */
-static int __devinit
+static int
 ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 {
 	struct ioc4_driver_data *idd;

drivers/misc/isl29003.c

@@ -365,7 +365,7 @@ static int isl29003_init_client(struct i2c_client *client)
  * I2C layer
  */
 
-static int __devinit isl29003_probe(struct i2c_client *client,
+static int isl29003_probe(struct i2c_client *client,
 				    const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);

drivers/misc/lis3lv02d/lis3lv02d_i2c.c

@@ -114,7 +114,7 @@ static struct of_device_id lis3lv02d_i2c_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, lis3lv02d_i2c_dt_ids);
 #endif
 
-static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
+static int lis3lv02d_i2c_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	int ret = 0;

drivers/misc/lis3lv02d/lis3lv02d_spi.c

@@ -69,7 +69,7 @@ static struct of_device_id lis302dl_spi_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, lis302dl_spi_dt_ids);
 #endif
 
-static int __devinit lis302dl_spi_probe(struct spi_device *spi)
+static int lis302dl_spi_probe(struct spi_device *spi)
 {
 	int ret;
 

drivers/misc/mei/main.c

@@ -743,7 +743,7 @@ static struct miscdevice  mei_misc_device = {
  *
  * returns true if ME Interface is valid, false otherwise
  */
-static bool __devinit mei_quirk_probe(struct pci_dev *pdev,
+static bool mei_quirk_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	u32 reg;
@@ -765,7 +765,7 @@ static bool __devinit mei_quirk_probe(struct pci_dev *pdev,
  *
  * returns 0 on success, <0 on failure.
  */
-static int __devinit mei_probe(struct pci_dev *pdev,
+static int mei_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	struct mei_device *dev;

drivers/misc/pch_phub.c

@@ -666,7 +666,7 @@ static struct bin_attribute pch_bin_attr = {
 	.write = pch_phub_bin_write,
 };
 
-static int __devinit pch_phub_probe(struct pci_dev *pdev,
+static int pch_phub_probe(struct pci_dev *pdev,
 				    const struct pci_device_id *id)
 {
 	int retval;

drivers/misc/phantom.c

@@ -324,7 +324,7 @@ static irqreturn_t phantom_isr(int irq, void *data)
  * Init and deinit driver
  */
 
-static unsigned int __devinit phantom_get_free(void)
+static unsigned int phantom_get_free(void)
 {
 	unsigned int i;
 
@@ -335,7 +335,7 @@ static unsigned int __devinit phantom_get_free(void)
 	return i;
 }
 
-static int __devinit phantom_probe(struct pci_dev *pdev,
+static int phantom_probe(struct pci_dev *pdev,
 	const struct pci_device_id *pci_id)
 {
 	struct phantom_device *pht;

drivers/misc/pti.c

@@ -796,7 +796,7 @@ static const struct tty_port_operations tty_port_ops = {
  *	0 for success
  *	otherwise, error
  */
-static int __devinit pti_pci_probe(struct pci_dev *pdev,
+static int pti_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
 	unsigned int a;

drivers/misc/spear13xx_pcie_gadget.c

@@ -711,7 +711,7 @@ static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
 	spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
 }
 
-static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+static int spear_pcie_gadget_probe(struct platform_device *pdev)
 {
 	struct resource *res0, *res1;
 	unsigned int status = 0;

drivers/misc/ti_dac7512.c

@@ -54,7 +54,7 @@ static const struct attribute_group dac7512_attr_group = {
 	.attrs = dac7512_attributes,
 };
 
-static int __devinit dac7512_probe(struct spi_device *spi)
+static int dac7512_probe(struct spi_device *spi)
 {
 	int ret;
 

drivers/misc/tsl2550.c

@@ -347,7 +347,7 @@ static int tsl2550_init_client(struct i2c_client *client)
  */
 
 static struct i2c_driver tsl2550_driver;
-static int __devinit tsl2550_probe(struct i2c_client *client,
+static int tsl2550_probe(struct i2c_client *client,
 				   const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);