media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size

These two functions did not take the imx219->mutex lock, but
imx219_get_format_code checks that a lock is taken, so it issues
a warning:

[    8.738717] WARNING: CPU: 2 PID: 60 at drivers/media/i2c/imx219.c:653 imx219_get_format_code+0xac/0xc0
[    8.748113] Modules linked in:
[    8.751214] CPU: 2 PID: 60 Comm: kworker/2:1 Tainted: G        W         5.8.0-rc1-arm64 #148
[    8.759821] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT)
[    8.765806] Workqueue: events deferred_probe_work_func
[    8.771003] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[    8.776635] pc : imx219_get_format_code+0xac/0xc0
[    8.781390] lr : imx219_get_format_code+0xa8/0xc0
[    8.786143] sp : ffff800012a538f0
[    8.789495] x29: ffff800012a538f0 x28: ffff800012838e90
[    8.794867] x27: ffff0000f28c5800 x26: ffff800011161c68
[    8.800237] x25: ffff0000f2a5a3f8 x24: 0000000000000018
[    8.805605] x23: ffff0000f284ef18 x22: ffff0000f2a5a080
[    8.810974] x21: ffff0000f284ff00 x20: ffff0000f2a5a080
[    8.816343] x19: 000000000000300f x18: 00000000ffffffff
[    8.821712] x17: ffff800011c77268 x16: 00000000000040d7
[    8.827081] x15: 00000000000040d8 x14: 0000000000000000
[    8.832451] x13: 00000000000040d4 x12: ffff800011d19300
[    8.837819] x11: 00000000000208c0 x10: 0000000000000004
[    8.843188] x9 : 000000003baa2ecd x8 : 000000008b3f9c73
[    8.848558] x7 : 0000000000000008 x6 : 0000000000000034
[    8.853929] x5 : 0000000000000000 x4 : 0000000000000001
[    8.859297] x3 : ffff800010a2a8a8 x2 : ffff0000f84a8000
[    8.864666] x1 : 0000000000000000 x0 : 0000000000000000
[    8.870034] Call trace:
[    8.872515]  imx219_get_format_code+0xac/0xc0
[    8.876921]  imx219_enum_mbus_code+0x38/0x60
[    8.881241]  call_enum_mbus_code+0x50/0x70
[    8.885387]  tegra_vi_graph_notify_complete+0x290/0x5e8
[    8.890670]  v4l2_async_notifier_try_complete.part.0+0x48/0x68
[    8.896563]  v4l2_async_register_subdev+0x100/0x1c0
[    8.901497]  v4l2_async_register_subdev_sensor_common+0x70/0xf0
[    8.907477]  imx219_probe+0x590/0x728
[    8.911184]  i2c_device_probe+0xe4/0x2b0
[    8.915151]  really_probe+0xd8/0x330
[    8.918768]  driver_probe_device+0x58/0xb8
[    8.922909]  __device_attach_driver+0x84/0xc8
[    8.927315]  bus_for_each_drv+0x78/0xc8
[    8.931193]  __device_attach+0xe4/0x140
[    8.935072]  device_initial_probe+0x14/0x20
[    8.939301]  bus_probe_device+0x9c/0xa8
[    8.943179]  deferred_probe_work_func+0x74/0xb0
[    8.947759]  process_one_work+0x2c4/0x740
[    8.951813]  worker_thread+0x4c/0x430
[    8.955518]  kthread+0x158/0x178
[    8.958786]  ret_from_fork+0x10/0x1c
[    8.962401] irq event stamp: 63536
[    8.965846] hardirqs last  enabled at (63535): [<ffff800010082398>] el1_irq+0xd8/0x180
[    8.973846] hardirqs last disabled at (63536): [<ffff8000100a6484>] do_debug_exception+0x16c/0x258
[    8.982895] softirqs last  enabled at (63534): [<ffff800010080d4c>] _stext+0x54c/0x594
[    8.990896] softirqs last disabled at (63525): [<ffff8000100c8350>] irq_exit+0x100/0x138
[    8.999066] ---[ end trace ebfbcd84b75ef921 ]---
[    9.004354] ------------[ cut here ]------------
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/i2c/imx219.c

@@ -806,7 +806,9 @@ static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
 	if (code->index >= (ARRAY_SIZE(codes) / 4))
 		return -EINVAL;
 
+	mutex_lock(&imx219->mutex);
 	code->code = imx219_get_format_code(imx219, codes[code->index * 4]);
+	mutex_unlock(&imx219->mutex);
 
 	return 0;
 }
@@ -816,11 +818,15 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd,
 				  struct v4l2_subdev_frame_size_enum *fse)
 {
 	struct imx219 *imx219 = to_imx219(sd);
+	u32 code;
 
 	if (fse->index >= ARRAY_SIZE(supported_modes))
 		return -EINVAL;
 
-	if (fse->code != imx219_get_format_code(imx219, fse->code))
+	mutex_lock(&imx219->mutex);
+	code = imx219_get_format_code(imx219, fse->code);
+	mutex_unlock(&imx219->mutex);
+	if (fse->code != code)
 		return -EINVAL;
 
 	fse->min_width = supported_modes[fse->index].width;