Commit 8145095c authored by Ralf Baechle's avatar Ralf Baechle

[MIPS] Remove CONFIG_BUILD_ELF64.

    
This option is no longer usable with supported compilers.  It will be
replaced by usage of -msym32 in a separate patch.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 219ac73a
......@@ -70,18 +70,20 @@ CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN) += -D__MIPSEL__
CHECKFLAGS = $(CHECKFLAGS-y)
ifdef CONFIG_BUILD_ELF64
gas-abi = 64
ld-emul = $(64bit-emul)
vmlinux-32 = vmlinux.32
vmlinux-64 = vmlinux
else
ifdef CONFIG_32BIT
gas-abi = 32
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
vmlinux-64 = vmlinux.64
endif
cflags-$(CONFIG_64BIT) += $(call cc-option,-mno-explicit-relocs)
ifdef CONFIG_64BIT
gas-abi = 64
ld-emul = $(64bit-emul)
vmlinux-32 = vmlinux.32
vmlinux-64 = vmlinux
cflags-y += $(call cc-option,-mno-explicit-relocs)
endif
#
......@@ -630,7 +632,6 @@ endif
ifdef CONFIG_SGI_IP27
core-$(CONFIG_SGI_IP27) += arch/mips/sgi-ip27/
cflags-$(CONFIG_SGI_IP27) += -Iinclude/asm-mips/mach-ip27
ifdef CONFIG_BUILD_ELF64
ifdef CONFIG_MAPPED_KERNEL
load-$(CONFIG_SGI_IP27) += 0xc00000004001c000
OBJCOPYFLAGS := --change-addresses=0x3fffffff80000000
......@@ -639,16 +640,6 @@ else
load-$(CONFIG_SGI_IP27) += 0xa80000000001c000
OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000
endif
else
ifdef CONFIG_MAPPED_KERNEL
load-$(CONFIG_SGI_IP27) += 0xffffffffc001c000
OBJCOPYFLAGS := --change-addresses=0xc000000080000000
dataoffset-$(CONFIG_SGI_IP27) += 0x01000000
else
load-$(CONFIG_SGI_IP27) += 0xffffffff8001c000
OBJCOPYFLAGS := --change-addresses=0xa800000080000000
endif
endif
endif
#
......
......@@ -247,7 +247,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_BUILD_ELF64=y
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
......
......@@ -234,7 +234,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_BUILD_ELF64=y
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
......
......@@ -224,7 +224,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
......
......@@ -220,7 +220,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
......
......@@ -223,7 +223,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
......
......@@ -247,7 +247,6 @@ CONFIG_MMU=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_MIPS32_O32=y
......
......@@ -447,21 +447,10 @@ static inline void resource_init(void)
{
int i;
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
/*
* The 64bit code in 32bit object format trick can't represent
* 64bit wide relocations for linker script symbols.
*/
code_resource.start = CPHYSADDR(&_text);
code_resource.end = CPHYSADDR(&_etext) - 1;
data_resource.start = CPHYSADDR(&_etext);
data_resource.end = CPHYSADDR(&_edata) - 1;
#else
code_resource.start = virt_to_phys(&_text);
code_resource.end = virt_to_phys(&_etext) - 1;
data_resource.start = virt_to_phys(&_etext);
data_resource.end = virt_to_phys(&_edata) - 1;
#endif
/*
* Request address space for all standard RAM.
......
......@@ -951,7 +951,6 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
/* No i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_SMP
# ifdef CONFIG_BUILD_ELF64
/*
* 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
......@@ -962,18 +961,6 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
i_daddu(p, ptr, ptr, tmp);
i_dmfc0(p, tmp, C0_BADVADDR);
i_ld(p, ptr, rel_lo(pgdc), ptr);
# else
/*
* 64 bit SMP running in compat space has the lower part of
* &pgd_current[smp_processor_id()] stored in CONTEXT.
*/
if (!in_compat_space_p(pgdc))
panic("Invalid page directory address!");
i_dmfc0(p, ptr, C0_CONTEXT);
i_dsra(p, ptr, ptr, 23);
i_ld(p, ptr, 0, ptr);
# endif
#else
i_LA_mostly(p, ptr, pgdc);
i_ld(p, ptr, rel_lo(pgdc), ptr);
......
......@@ -33,12 +33,7 @@ extern unsigned long pgd_current[];
write_c0_context((unsigned long) smp_processor_id() << 25); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
#define TLBMISS_HANDLER_SETUP() \
write_c0_context((unsigned long) &pgd_current[smp_processor_id()] << 23); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
#ifdef CONFIG_64BIT
#define TLBMISS_HANDLER_SETUP() \
write_c0_context((unsigned long) smp_processor_id() << 26); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
......
......@@ -23,11 +23,7 @@
#include <linux/config.h>
#include <asm/addrspace.h>
#ifdef CONFIG_BUILD_ELF64
#define REP_BASE CAC_BASE
#else
#define REP_BASE CKSEG0
#endif
#ifdef CONFIG_MAPPED_KERNEL
......
......@@ -63,17 +63,7 @@
addu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
MFC0 k1, CP0_CONTEXT
dsra k1, 23
lui k0, %hi(pgd_current)
addiu k0, %lo(pgd_current)
dsubu k1, k0
lui k0, %hi(kernelsp)
daddu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
#ifdef CONFIG_64BIT
MFC0 k1, CP0_CONTEXT
lui k0, %highest(kernelsp)
dsrl k1, 23
......@@ -91,11 +81,7 @@
mfc0 \temp, CP0_CONTEXT
srl \temp, 23
#endif
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
lw \temp, TI_CPU(gp)
dsll \temp, 3
#endif
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
#ifdef CONFIG_64BIT
MFC0 \temp, CP0_CONTEXT
dsrl \temp, 23
#endif
......@@ -103,7 +89,7 @@
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
#ifdef CONFIG_64BIT
lui k1, %highest(kernelsp)
daddiu k1, %higher(kernelsp)
dsll k1, k1, 16
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment