Merge tag 'qcom-arm64-fixes-for-5.19' into arm64-for-5.20

This merges the 'qcom-arm64-fixes-for-5.19' tag into arm64-for-5.20 to
handle the merge conflict related to the header file changes in
sc7180-trogdor.

MAINTAINERS

@@ -2537,6 +2537,7 @@ W:	http://www.armlinux.org.uk/
 ARM/QUALCOMM SUPPORT
 M:	Andy Gross <agross@kernel.org>
 M:	Bjorn Andersson <bjorn.andersson@linaro.org>
+R:	Konrad Dybcio <konrad.dybcio@somainline.org>
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git

arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi

@@ -74,7 +74,7 @@ pm8994_regulators: pm8994-regulators {
 		vdd_l17_29-supply = <&vph_pwr>;
 		vdd_l20_21-supply = <&vph_pwr>;
 		vdd_l25-supply = <&pm8994_s5>;
-		vdd_lvs1_2 = <&pm8994_s4>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
 
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 

arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts

@@ -169,7 +169,7 @@ pm8994-regulators {
 		vdd_l17_29-supply = <&vph_pwr>;
 		vdd_l20_21-supply = <&vph_pwr>;
 		vdd_l25-supply = <&pm8994_s5>;
-		vdd_lvs1_2 = <&pm8994_s4>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
 
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 

arch/arm64/boot/dts/qcom/msm8994.dtsi

@@ -100,7 +100,7 @@ CPU5: cpu@101 {
 		CPU6: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
+			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
 		};
@@ -108,7 +108,7 @@ CPU6: cpu@102 {
 		CPU7: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
+			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&L2_1>;
 		};

arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi

@@ -5,7 +5,7 @@
  * Copyright 2021 Google LLC.
  */
 
-#include "sc7180-trogdor.dtsi"
+/* This file must be included after sc7180-trogdor.dtsi */
 
 / {
 	/* BOARD-SPECIFIC TOP LEVEL NODES */

arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi

@@ -5,7 +5,7 @@
  * Copyright 2020 Google LLC.
  */
 
-#include "sc7180-trogdor.dtsi"
+/* This file must be included after sc7180-trogdor.dtsi */
 #include <arm/cros-ec-keyboard.dtsi>
 
 &ap_sar_sensor {

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -4244,7 +4244,7 @@ mdss: mdss@ae00000 {
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			clocks = <&gcc GCC_DISP_AHB_CLK>,
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "core";
 

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -2872,6 +2872,16 @@ intc: interrupt-controller@17100000 {
 			reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
 			      <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x17140000 0x0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
 		};
 
 		timer@17420000 {
@@ -3056,8 +3066,8 @@ ufs_mem_hc: ufshc@1d84000 {
 
 			iommus = <&apps_smmu 0xe0 0x0>;
 
-			interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 			clock-names =
 				"core_clk",