Commit 8265d427 authored by Sakari Ailus's avatar Sakari Ailus Committed by Mauro Carvalho Chehab

media: dt-bindings: nokia,smia: Convert to YAML

Convert nokia,smia DT bindings to YAML.

Also add explicit license to bindings.
Signed-off-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent 390bb477
SMIA/SMIA++ sensor
SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
of that. These definitions are valid for both types of sensors.
More detailed documentation can be found in
Documentation/devicetree/bindings/media/video-interfaces.txt .
The device node should contain a "port" node which may contain one or more
endpoint nodes, in accordance with video interface bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt .
Mandatory properties
--------------------
- compatible: "nokia,smia"
- reg: I2C address (0x10, or an alternative address)
- clocks: External clock to the sensor
- clock-frequency: Frequency of the external clock to the sensor
Optional properties
-------------------
- reset-gpios: XSHUTDOWN GPIO
- flash-leds: See ../video-interfaces.txt
- lens-focus: See ../video-interfaces.txt
- rotation: Integer property; valid values are 0 (sensor mounted upright)
and 180 (sensor mounted upside down). See
../video-interfaces.txt .
- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
dependent).
Endpoint node mandatory properties
----------------------------------
- data-lanes: <1..n>
- link-frequencies: List of allowed data link frequencies. An array of
64-bit elements.
Example
-------
&i2c2 {
clock-frequency = <400000>;
camera-sensor@10 {
compatible = "nokia,smia";
reg = <0x10>;
reset-gpios = <&gpio3 20 0>;
vana-supply = <&vaux3>;
clocks = <&omap3_isp 0>;
clock-frequency = <9600000>;
port {
smiapp_ep: endpoint {
data-lanes = <1 2>;
remote-endpoint = <&csi2a_ep>;
link-frequencies =
/bits/ 64 <199200000 210000000
499200000>;
};
};
};
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (C) 2014--2020 Intel Corporation
$id: http://devicetree.org/schemas/media/i2c/nokia,smia.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SMIA/SMIA++ sensor
maintainers:
- Sakari Ailus <sakari.ailus@linux.intel.com>
description:
SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension of
that. These definitions are valid for both types of sensors.
More detailed documentation can be found in
Documentation/devicetree/bindings/media/video-interfaces.txt .
properties:
compatible:
const: nokia,smia
reg:
maxItems: 1
vana-supply:
description: Analogue voltage supply (VANA), typically 2,8 volts (sensor
dependent).
maxItems: 1
clocks:
description: External clock to the sensor.
maxItems: 1
clock-frequency:
description: Frequency of the external clock to the sensor in Hz.
reset-gpios:
description: Reset GPIO. Also commonly called XSHUTDOWN in hardware
documentation.
maxItems: 1
flash-leds:
description: Flash LED phandles. See ../video-interfaces.txt for details.
lens-focus:
description: Lens focus controller phandles. See ../video-interfaces.txt
for details.
rotation:
description: Rotation of the sensor. See ../video-interfaces.txt for
details.
enum: [ 0, 180 ]
port:
type: object
properties:
endpoint:
type: object
properties:
link-frequencies:
$ref: /schemas/types.yaml#/definitions/uint64-array
description: List of allowed data link frequencies.
data-lanes:
minItems: 1
maxItems: 8
required:
- link-frequencies
- data-lanes
required:
- compatible
- reg
- clock-frequency
- clocks
additionalProperties: false
examples:
- |
i2c2 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
camera-sensor@10 {
compatible = "nokia,smia";
reg = <0x10>;
reset-gpios = <&gpio3 20 0>;
vana-supply = <&vaux3>;
clocks = <&omap3_isp 0>;
clock-frequency = <9600000>;
port {
smiapp_ep: endpoint {
data-lanes = <1 2>;
remote-endpoint = <&csi2a_ep>;
link-frequencies = /bits/ 64 <199200000 210000000
499200000>;
};
};
};
};
...
......@@ -11634,7 +11634,7 @@ MIPI CCS, SMIA AND SMIA++ IMAGE SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@linux.intel.com>
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
F: Documentation/devicetree/bindings/media/i2c/nokia,smia.yaml
F: Documentation/driver-api/media/drivers/ccs/
F: drivers/media/i2c/ccs/
F: drivers/media/i2c/smiapp-pll.c
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment