Commit 82f305b1 authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Mark Brown

regulator: dt-bindings: mt6358: Drop *_sshub regulators

The *_sshub regulators are actually alternate configuration interfaces
for their non *_sshub counterparts. They are not separate regulator
outputs. These registers are intended for the companion processor to
use to configure the power rails while the main processor is sleeping.
They are not intended for the main operating system to use.

Since they are not real outputs they shouldn't be modeled separately.
Remove them. Luckily no device tree actually uses them.
Signed-off-by: default avatarChen-Yu Tsai <wenst@chromium.org>
Reviewed-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
Acked-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609083009.2822259-3-wenst@chromium.orgSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent a74d4c57
...@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt. ...@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are:: The valid names for regulators are::
BUCK: BUCK:
buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11, buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1 buck_vs2, buck_vmodem, buck_vs1
LDO: LDO:
ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
ldo_vrf18, ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
Example: Example:
...@@ -346,17 +346,5 @@ Example: ...@@ -346,17 +346,5 @@ Example:
regulator-max-microvolt = <3100000>; regulator-max-microvolt = <3100000>;
regulator-enable-ramp-delay = <540>; regulator-enable-ramp-delay = <540>;
}; };
mt6358_vcore_sshub_reg: buck_vcore_sshub {
regulator-name = "vcore_sshub";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
};
mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
regulator-name = "vsram_others_sshub";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1293750>;
};
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment