ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration option

This AT91 specific Kconfig option removed the code that dealt with
programmable clocks. Each AT91 SoC embeds programmable clocks and
there is little gain to remove this code in case that such a clock
is not used.
If this option is not selected, it causes certain drivers to fail
to build. We simply remove this option instead of adding code just
to build a workaround.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/configs/at91_dt_defconfig

@@ -22,7 +22,6 @@ CONFIG_SOC_AT91SAM9X5=y
 CONFIG_SOC_AT91SAM9N12=y
 CONFIG_MACH_AT91RM9200_DT=y
 CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set

arch/arm/configs/at91rm9200_defconfig

@@ -31,7 +31,6 @@ CONFIG_MACH_YL9200=y
 CONFIG_MACH_CPUAT91=y
 CONFIG_MACH_ECO920=y
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=100
 # CONFIG_ARM_THUMB is not set
 CONFIG_PCCARD=y

arch/arm/configs/at91sam9260_9g20_defconfig

@@ -28,7 +28,6 @@ CONFIG_MACH_PCONTROL_G20=y
 CONFIG_MACH_GSIA18S=y
 CONFIG_MACH_SNAPPER_9260=y
 CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y

arch/arm/configs/at91sam9261_9g10_defconfig

@@ -18,7 +18,6 @@ CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9261=y
 CONFIG_MACH_AT91SAM9261EK=y
 CONFIG_MACH_AT91SAM9G10EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set

arch/arm/configs/at91sam9g45_defconfig

@@ -18,7 +18,6 @@ CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
 CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set

arch/arm/configs/at91sam9rl_defconfig

@@ -13,7 +13,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9RL=y
 CONFIG_MACH_AT91SAM9RLEK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0

arch/arm/configs/sama5_defconfig

@@ -20,7 +20,6 @@ CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAM_V7=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_MACH_SAMA5_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_UACCESS_WITH_MEMCPY=y

arch/arm/mach-at91/Kconfig

@@ -214,12 +214,6 @@ config MACH_SAMA5_DT
 
 comment "AT91 Feature Selections"
 
-config AT91_PROGRAMMABLE_CLOCKS
-	bool "Programmable Clocks"
-	help
-	  Select this if you need to program one or more of the PCK0..PCK3
-	  programmable clock outputs.
-
 config AT91_SLOW_CLOCK
 	bool "Suspend-to-RAM disables main oscillator"
 	depends on SUSPEND

arch/arm/mach-at91/clock.c

@@ -330,8 +330,6 @@ EXPORT_SYMBOL(clk_get_rate);
 
 /*------------------------------------------------------------------------*/
 
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
 /*
  * For now, only the programmable clocks support reparenting (MCK could
  * do this too, with care) or rate changing (the PLLs could do this too,
@@ -459,8 +457,6 @@ static void __init init_programmable_clock(struct clk *clk)
 	clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
 }
 
-#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
 /*------------------------------------------------------------------------*/
 
 #ifdef CONFIG_DEBUG_FS
@@ -577,12 +573,10 @@ int __init clk_register(struct clk *clk)
 		clk->parent = &mck;
 		clk->mode = pmc_sys_mode;
 	}
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
 	else if (clk_is_programmable(clk)) {
 		clk->mode = pmc_sys_mode;
 		init_programmable_clock(clk);
 	}
-#endif
 
 	at91_clk_add(clk);
 

arch/arm/mach-at91/pm.c

@@ -155,9 +155,6 @@ static int at91_pm_verify_clocks(void)
 		}
 	}
 
-	if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS))
-		return 1;
-
 	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
 	for (i = 0; i < 4; i++) {
 		u32 css;

drivers/clk/at91/Makefile

@@ -4,9 +4,8 @@
 
 obj-y += pmc.o
 obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
-obj-y += clk-system.o clk-peripheral.o
+obj-y += clk-system.o clk-peripheral.o clk-programmable.o
 
-obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS)	+= clk-programmable.o
 obj-$(CONFIG_HAVE_AT91_UTMI)		+= clk-utmi.o
 obj-$(CONFIG_HAVE_AT91_USB_CLK)		+= clk-usb.o
 obj-$(CONFIG_HAVE_AT91_SMD)		+= clk-smd.o

drivers/clk/at91/pmc.c

@@ -279,7 +279,6 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
 		.data = of_at91sam9x5_clk_periph_setup,
 	},
 	/* Programmable clocks */
-#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
 	{
 		.compatible = "atmel,at91rm9200-clk-programmable",
 		.data = of_at91rm9200_clk_prog_setup,
@@ -292,7 +291,6 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
 		.compatible = "atmel,at91sam9x5-clk-programmable",
 		.data = of_at91sam9x5_clk_prog_setup,
 	},
-#endif
 	/* UTMI clock */
 #if defined(CONFIG_HAVE_AT91_UTMI)
 	{

drivers/clk/at91/pmc.h

@@ -85,14 +85,12 @@ extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np,
 extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np,
 						  struct at91_pmc *pmc);
 
-#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS)
 extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np,
 						struct at91_pmc *pmc);
 extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np,
 						 struct at91_pmc *pmc);
 extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np,
 						struct at91_pmc *pmc);
-#endif
 
 #if defined(CONFIG_HAVE_AT91_UTMI)
 extern void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np,

sound/soc/atmel/Kconfig

@@ -25,7 +25,7 @@ config SND_ATMEL_SOC_SSC
 
 config SND_AT91_SOC_SAM9G20_WM8731
 	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
-	depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC && AT91_PROGRAMMABLE_CLOCKS
+	depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC
 	select SND_ATMEL_SOC_PDC
 	select SND_ATMEL_SOC_SSC
 	select SND_SOC_WM8731